Next Article in Journal
Naturally Occurring Cinnamic Acid Sugar Ester Derivatives
Previous Article in Journal
Exogenous Methyl Jasmonate and Salicylic Acid Induce Subspecies-Specific Patterns of Glucosinolate Accumulation and Gene Expression in Brassica oleracea L.
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Original Synthesis of Fluorenyl Alcohol Derivatives by Reductive Dehalogenation Initiated by TDAE

Aix-Marseille Université, CNRS, Institut de Chimie Radicalaire ICR, UMR 7273, Laboratoire de Pharmaco-Chimie Radicalaire, Marseille 13385, France
*
Author to whom correspondence should be addressed.
Submission received: 19 September 2016 / Revised: 18 October 2016 / Accepted: 19 October 2016 / Published: 24 October 2016
(This article belongs to the Section Organic Chemistry)

Abstract

:
We report here a novel and easy-to-handle reductive dehalogenation of 9-bromofluorene in the presence of arylaldehydes and dicarbonyl derivatives to give the corresponding fluorenyl alcohol derivatives and Darzens epoxides as by-products in tetrakis(dimethylamino)ethylene (TDAE) reaction conditions. The reaction is believed to proceed via two successive single electron transfers to generate the fluorenyl anion which was able to react with different electrophiles. A mechanistic study was conducted to understand the formation of the epoxide derivatives.

Graphical Abstract

1. Introduction

Fluorenyl derivatives have attracted interest from synthetic organic chemists due to their notable biological and pharmaceutical properties and applications. The literature reports that fluorenone Schiff base derivatives have a potential application and biological activity in therapeutic areas, such as antifungal agents [1,2]. The fluorene skeleton is found in numerous natural products. Dendroflorin and structurally-related nobilone displayed higher antioxidant activity than vitamin C in the ORAC assay [3]. Gramniphenols were isolated from the whole plant of Arundina gramnifolia by Yang and coworkers in 2012 and displayed anti-HIV-1 activity with therapeutic index values above 100:1 [4]. Many dermatological and photostable cosmetic compositions consist of lumefantrine, a 9-fluorenylidene derivative [5]. The fluorenyl core can be found in indecainide (Decabid®), which is a class Ic anti-arrhythmic agent [6].
In terms of non-steroidal anti-inflammatory agents (NSAIDs), this scaffold bearing an alkanoïc acid moiety gives cicloprofen. Paranyline is used in dispersible formulations of anti-inflammatory agents [7]. However, although these drugs are very effective and abundantly prescribed, they have revealed some gastric or intestinal adverse effect [8]. The representatives containing the fluorenyl scaffold cited above are shown in Figure 1.
Since 2003, our laboratory has been developing original synthetic methods based on neutral, ground-state organic reducing agents [9,10,11,12,13,14], aimed at preparing new, potentially bioactive compounds [9]. Tetrakis(dimethylamino)ethylene (TDAE), as shown in Figure 1 [15,16,17], is a powerful tool in modern organic chemistry because it allows reduction under mild conditions. Reduction can occur without the use of organometallics or reactive metals. TDAE shows a single, two-electron oxidation peak at −0.62 V vs. SCE in diméthylformamide (DMF) which means it is about as reducing as zinc metal [18,19,20]. TDAE can react with activated alkyl halides, such as CF3I, CF2Br2, and activated benzyl halides, to produce the corresponding carbanions [21,22,23,24,25,26,27,28,29,30]. We report herein a valuable synthetic method to generate a 9-bromofluorenyl anion from fluorenyl bromide 1 and on its reaction with a series of carbonyl electrophiles affording the corresponding alcohol derivatives.

2. Results and Discussion

It was anticipated that fluorenyl bromide 1 could be a good electron-acceptor, because of its large π-conjugated system. Initially, the reaction of 9-bromofluorene 1 and 4-chlorobenzaldehyde 2a was investigated as the model system (Scheme 1).
We performed the reactions using various aprotic polar solvents. The influence of the quantity of aldehyde 2a and TDAE was also studied. The results are summarized in Table 1.
A first attempt (entry 1) was carried out with 2 equiv. of 2a and 1 equiv. of RBr 1 to give 29% of the corresponding alcohol 4a. TDAE was added at −20 °C to maximize the charge transfer complex formation. Unfortunately, 1H NMR spectra of the crude product showed a signal at δ 4.85 associated to the homo-coupling adduct of 9-bromofluorene (44%). To reduce the extent of dimer formation, 3 equiv. of 2a was employed (entry 2), giving 50% of 4a and the dimer was isolated with 8% yield (entry 2). The conversion to the 9,9′-bifluorenyl was not reduced by increasing the excess of aldehyde. The optimized protocol of 9-bromofluorene 1 was defined with 3 equiv. of aldehyde 2a, 1 equiv. of TDAE in DMF, for 1 h at −20 °C followed by 2 h at room temperature. The reactions led to the corresponding alcohol 4a with 56% yield (Table 1, entry 6). The 9-Bromofluorene was found to be a good substrate in such TDAE-mediated carbon-carbon coupling reactions. This methodology was then applied to other electrophiles. The TDAE-initiated reaction of 1 with various electrophiles was investigated according to the optimal procedure cited above and the results are summarized in Table 2. The expected corresponding alcohols 4a, 4b, 4e, 4f, 4i were isolated in moderate to good yields, from 41% to 75% with aldehydes bearing an electron-withdrawing group.
For 4-nitrobenzaldehyde 2h, no alcohol product was isolated. Its strong electrophilic character, has already led to unexpected reactivity in these reaction conditions, as cited in our previous work [11]. With methylbenzaldehyde 2g and 4-methoxybenzaldehyde 2d, the conversions were lower with, respectively, 24% and 34% yields. This may be explained by their weak electrophilic character compared to the other aldehydes. Competitive epoxide formation was observed, which was obtained in low yield (from 6% to 30%, Table 2, entries 1–9). Subsequently, the methodology was generalized to heteroaromatic aldehydes (entries 10–12). When pyridine-4-carbaldehyde 2k was employed, 42% of the corresponding alcohol 4k was obtained. With pyridine-3-carbaldehyde 2l, the yield reported was lower (19%). The scope of this original reactivity was extended to pyruvates, ethyl glyoxylate, methyl 3,3,3-trifluoropyruvate, and diethylketomalonate (entries 13–16). The best result was achieved with diethylketomalonate affording the corresponding fluorenyl alcohol 4p in 70% yield (entry 16). This can, no doubt, be attributed to the stronger electrophilic character of its carbonyl function. It should be noted that we never observed the reaction of the fluorenyl anion with ester moiety. The poor yield (19%) observed with ethyl glyoxylate 2o could be due to a polymerization reaction of the aldehyde. With propriophenone 2q, only starting materials were recovered (entry 17), which could be attributed to the acidity of the protons adjacent to the carbonyl function.
In order to extend the substrate scope of TDAE-initiated reactions, an attempt had been run with 1,1′-bromobiphenylmethane, but no alcohol adduct was formed. The corresponding dimer product was obtained with 74% yield. This difference in reactivity can be attributed to the better stabilization of the corresponding 9-fluorenyl aromatic anion.
The formation of the alcohol product can be conceived to proceed via two successive single electron transfers (Scheme 2). The first reduction leads to the cleavage of the C-Br bond to form the 9-fluorenyl radical and the bromide anion. A subsequent SET (single monoelectronic transfer) gave the fluorenyl anion A, which is aromatic and has an intense orange color, from the corresponding radical. An alcoholate was successively obtained by the nucleophilic addition of the fluorenyl anion A on the aldehyde which gave the corresponding alcohol after hydrolysis. As cited above, 9-bromofluorene 1 can react under our conditions with aromatic aldehydes, yielding epoxy products. Our hypothesis is that 9-bromofluorenyl anion B could be formed after deprotonation of 1 by the above alcoholate. The reaction of B with the aldehyde gave the epoxide derivatives via Darzen reaction. Our hypothesis is supported by literature data [31].
When 9-bromofluorene 1 was treated with 3 equiv. of triethylamine in the presence of 4-cyanobenzaldehyde 2f under classical TDAE conditions, the corresponding Darzens condensation product 5f was afforded in low yields (7%) (Scheme 3).
Another compound had been observed by 1H-NMR corresponding to 4-((9H-fluoren-9-ylidene)methyl)benzonitrile 6f with 15% yield. However, another multistep pathway involving a carbene-like intermediate cannot be excluded. To verify this hypothesis, we examined the reaction of 1 in the presence of cyclohexene [32]. The 1H-NMR spectrum of the crude mixture showed no signal attributable to a cyclopropane adduct that could formed by carbene insertion to the cyclohexene double bond: only peaks due to dimer 3 were found. These findings indicate that the epoxide derivative could be formed through the 9-bromofluorenyl anion sequence.

3. Materials and Methods

3.1. General Information

Melting points were determined on a Büchi melting point B-540 apparatus (BÜCHI Labortechnik AG, Flawil, Switzerland) and are uncorrected. Element analyses were performed on a Thermo Finnigan EA1112 (San Jose, CA, USA) at the spectropole of the Aix-Marseille University. Both 1H- and 13C-NMR spectra were determined on a Bruker Avance 250 spectrometer (Wissembourg, France) at the Service de RMN de la Faculté de Pharmacie de Marseille of the Aix-Marseille University and on a Bruker Avance III NanoBay 300 MHz spectrometer at the spectropole of Aix-Marseille University. The 1H- and the 13C-chemical shifts are reported from CDCl3 peaks: 1H (7.26 ppm) and 13C (77 ppm) or Me2SO-d6 (39.6 ppm). Multiplicities are represented by the following notations: s, singlet; d, doublet; t, triplet; q, quartet; m, a more complex multiplet, or overlapping multiplets. The following adsorbents were used for column chromatography: silica gel 60 (Merck, particle size 0.063–0.200 mm, 70–230 mesh ASTM, (Merck, Darmstadt, Germany). Thin Layer Chromatography (TLC) was performed on 5 cm × 10 cm aluminum plates coated with silica gel 60 F254 (Merck) in an appropriate solvent.

3.2. Typical Procedure

The TDAE (0.14 mL, 0.6 mmol) was slowly added, with a syringe, at −20 °C to a vigorously stirred solution of fluorenyl bromide 1 (150 mg, 0.6 mmol) with the appropriate aldehyde (1.8 mmol, 3 equivalents) and a spatula of sodium sulfate in 4 mL of DMF, under air. A red color was immediately developed with the formation of a fine white precipitate. The mixture was then stirred at −20 °C for 1 h and warmed to room temperature over a period of 2 h. Then 0.5 mL of water was added to quench the reaction. The solution was extracted with dichloromethane (3 × 30 mL), the combined organic layers were washed with brine (3 × 40 mL), and dried over MgSO4. The crude product was then obtained after evaporation of the solvent under reduced pressure. Purification by silica gel chromatographic column (dichloromethane: methanol) gave the corresponding fluorenyl derivatives.

3.3. Compound Characterizations

9H,9′H-9,9′-Bifluorene: 3 (9%); yellow powder; m.p. 216–217 °C (Lit.: 237–239 °C). 1H-NMR (200 MHz) (CDCl3) 7.66 (d, J = 7.51 Hz, 4H); 7.33–7.26 (m, 4H); 7.15–7.07 (m, 4H); 6.97 (d, J = 7.34 Hz, 4H); 4.85 (s, 2H). 13C-NMR (50 MHz) (CDCl3) 144.6 (4CIV); 141.5 (4CIV); 127.3 (4CHar); 126.7 (4CHar); 124.0 (4CHar); 119.6 (4CHar); 49.8 (2CH). Physical and spectroscopic data agree with those reported in the literature [33,34].
(4-Chlorophenyl)(9H-fluoren-9-yl)methanol: 4a (56%); yellow powder; m.p. 142–143 °C (Lit.: 126.5 °C). 1H-NMR (200 MHz) (CDCl3): 7.70 (d, J = 7.5 Hz, 2H); 7.40–7.17 (m, 10H); 5.15 (d, J = 5.7 Hz, 1H); 4.37 (d, J = 5.7 Hz, 1H); 1.90 (bs, OH). 13C-NMR (50 MHz) (CDCl3): 143.0 (CIV); 142.9 (2CIV); 141.7 (CIV); 140.2 (2CIV); 128.1 (2CHar); 127.7 (2CHar); 126.7 (2CHar); 125.9 (2CHar); 125.5 (2CHar); 119.8 (2CHar); 75.6 (CH); 56.4 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C20H15OClNa+: 329.0704 Da; found: 329.0704 Da. Physical data agree with those reported in the literature [35].
3′-(4-Chlorophenyl)spiro(fluorene-9,2′-oxirane): 5a (14%) yellow powder; m.p. 63–64 °C. 1H-NMR (200 MHz) (CDCl3) 7.76–7.68 (m, 2H); 7.51–7.29 (m, 8H); 7.02–6.94 (dd, J = 1 and 7.6 Hz, 1H); 6.50 (d, J = 7.6 Hz, 1H); 4.91 (s, 1H). 13C-NMR (50 MHz) (CDCl3) 141.6 (CIV); 141.4 (CIV); 140.6 (CIV); 138.4 (CIV); 134.0 (CIV); 133.7 (CIV); 129.4 (CHar); 129.3 (CHar); 128.6 (2CHar); 128.3 (2CHar); 127.6 (2CHar); 127.0 (CHar); 123.9 (CHar); 121.6 (CHar); 120.1 (CHar); 67.6 (CIV); 59.1 (CH). HRMS (ESI+): m/z [M + H]+ calculated for C20H14OCl+: 305.0728 Da; found: 305.0728 Da.
(9H-Fluoren-9-yl)(phenyl)methanol: 4b (57%); yellow powder; m.p. 116–117 °C (Lit.: 120–121 °C). 1H-NMR (200 MHz) (CDCl3) 7.64–7.60 (m, 2H); 7.31–7.24 (m, 7H); 7.16–7.06 (m, 3H); 6.97 (d, J = 6.9 Hz, 1H); 5.09 (d, J = 6.1 Hz, 1H); 4.40 (d, J = 6.1 Hz, 1H); 1.68 (bs, OH). 13C-NMR (50 MHz) (CDCl3) 143.6 (CIV); 143.3 (CIV); 142.1 (CIV); 141.8 (CIV); 141.7 (CIV); 128.1 (2CHar); 127.8 (CHar); 127.6 (CHar); 126.8 (2CHar); 126.7 (CHar); 126.6 (CHar); 126.6 (CHar);126.2 (CHar); 125.5 (CHar); 119.8 (CHar) ; 119.7 (CHar); 76.3 (CH); 54.7 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C20H16ONa+: 295.1093 Da; found: 295.1093 Da. Physical and spectroscopic data agree with those reported in the literature [34,36].
3′-Phenylspiro(fluorene-9,2′-oxirane): 5b (17%); yellow powder; m.p. 119–120 °C (Lit.: 130–131 °C). 1H-NMR (200 MHz) (CDCl3) 7.76–7.67 (m, 2H); 7.50–7.30 (m, 9H); 6.93 (dt, J = 7.6 and 0.9 Hz, 1H); 6.50 (d, J = 7.6 Hz, 1H); 4.97 (s,1H). 13C-NMR (50 MHz) (CDCl3) 141.7 (CIV); 141.5 (CIV); 140.6 (CIV); 138.7 (CIV); 135.2 (CIV); 129.3 (CHar); 129.1 (CHar); 128.3 (2CHar); 128.1 (CHar); 127.6 (CHar); 127.0 (CHar); 126.8 (2CHar); 124.1 (CIV); 121.6 (CHar); 120.2 (CHar); 120.1 (CHar); 67.6 (CIV); 65.7 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C20H14ONa+: 293.0937 Da; found: 293.0936 Da. Physical and spectroscopic data agree with those reported in the literature [37].
(4-Bromophenyl)(9H-fluoren-9-yl)methanol: 4c (75%); yellow powder; m.p. 129–130 °C. 1H-NMR (200 MHz) (CDCl3) 7.70 (d, J = 7.4 Hz, 2H); 7.43–7.34 (m, 4H); 7.30–7.20 (m, 4H); 7.15 (d, J = 8.4 Hz, 2H); 5.15 (d, J = 5.5 Hz, 1H); 4.38 (d, J = 5.5 Hz, 1H). 13C-NMR (50 MHz) (CDCl3) 143.0 (2CIV); 142.9 (CIV); 141.8 (CIV); 140.8 (2CIV); 131.1 (2CHar); 128.4 (2CHar); 127.7 (CHar); 126.8 (CHar); 126.7 (CHar); 125.9 (CHar); 125.5 (CHar); 121.5 (CHar); 119.9 (CHar); 119.8 (CHar); 75.7 (CH), 54.6 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C20H15OBrNa+: 373.0198 Da; found: 373.0198 Da.
3′-(4-Bromophenyl)spiro(fluorene-9,2′-oxirane) 5c (10%) yellow powder; m.p. 122–123 °C. 1H-NMR (200 MHz) (CDCl3) 7.76–7.69 (m, 2H); 7.57–7.54 (m, 2H); 7.51–7.28 (m, 6H); 7.02–6.96 (m, 1H); 7.51 (d, J = 7.7 Hz, 1H); 4.86 (s, 1H). 13C-NMR (50 MHz) (CDCl3) 141.6 (CIV); 141.3 (CIV); 140.6 (CIV); 138.2 (CIV); 134.2 (CIV); 131.6 (2CHar); 129.5 (CHar); 129.3 (CHar); 128.6 (2CHar); 127.7 (CHar); 127.1 (CHar); 123.9 (CHar); 122.2 (CIV); 121.6 (CHar); 120.2 (2CHar); 67.6 (CIV); 65.1 (CH). HRMS (ESI+): m/z [M + H]+ calculated for C20H14OBr+: 349.0223 Da; found: 349.0150 Da.
(9H-Fluoren-9-yl)(4-methoxyphenyl)methanol: 4d (34%); white powder; m.p. = 115–116 °C (Lit.: 122–123 °C)3; 1H-NMR (200 MHz) (CDCl3) 7.74–7.70 (dd, J = 7.6 and 3.3 Hz, 2H); 7.46–7.32 (m, 3H); 7.27–7.15 (m, 4H); 7.03 (d, J = 7.6 Hz, 1H); 6.88 (d, J = 8.8 Hz, 2H); 4.97 (d, J = 6.5 Hz, 1H); 4.38 (d, J = 6.5 Hz, 1H); 3.83 (s, 3H) 1.96 (bs, OH). 13C-NMR (50 MHz) (CDCl3) 159.1 (CIV); 143.9 (CIV); 143.3 (CIV); 141.8 (CIV); 141.6 (CIV); 134.4 (CIV); 128.0 (2CHar); 127.6 (CHar); 127.5 (CHar); 126.6 (CHar); 126.5 (CHar); 126.3 (CHar); 125.7 (CHar); 119.8 (CHar); 119.7 (CHar); 113.5 (2CHar); 76.1 (CH); 55.2 (CH); 54.7 (CH3). HRMS (ESI+): m/z [M + Na]+ calculated for C21H18O2Na+: 325.1199 Da; found: 325.1200 Da.
(9H-Fluoren-9-yl)(4-fluorophenyl)methanol: 4e (54%); white powder; m.p. 120–121 °C; 1H-NMR (200 MHz) (CDCl3) 7.70 (d, J = 7.4 Hz, 2H); 7.41–7.33 (m, 3H); 7.26–7.14 (m, 5H); 7.01–6.95 (m, 2H); 5.11 (d, J = 5.6 Hz, 1H); 4.37 (d, J = 5.6 Hz, 1H); 2.01 (bs, OH). 13C-NMR (50 MHz) (CDCl3) 160.5 (CIV); 143.5 (CIV); 143.2 (CIV); 142.0 (CIV); 141.9 (CIV); 134.8 (CIV); 128.5 (CHar); 128.4 (CHar); 127.7 (2CHar); 126.7 (2CHar); 126.0 (CHar); 125.7 (CHar); 119.9 (CHar) ; 119.8 (CHar); 115.0 (CHar); 114.7 (CHar); 75.9 (CIV); 54.9 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C20H15OFNa+: 313.0999 Da; found: 313.0999 Da.
4-((9H-Fluoren-9-yl)(hydroxy)methyl)benzonitrile: 4f (41%); white powder; m.p. 169–170 °C; 1H-NMR (200 MHz) (CDCl3) 7.68 (d, J = 7.7 Hz, 2H); 7.52 (d, J = 8.2 Hz, 2H); 7.41–7.18 (m, 8H); 5.36 (d, J = 4.7 Hz, 1H); 4.42 (d, J = 4.7 Hz, 1H); 2.07 (bs, 1H). 13C-NMR (50 MHz) (CDCl3) 146.7 (CIV); 142.5 (CIV); 142.3 (CIV); 141.8 (2CIV); 131.6 (2CHar); 128.0 (2CHar); 127.3 (2CHar); 127.0 (CHar); 126.8 (CHar); 125.5 (CHar); 125.4 (CHar); 120.1 (CHar); 120.0 (CHar); 118.8 (CIV); 111.3 (CIV); 75.5 (CH), 54.5 (CH). HRMS (ESI+): m/z [M + H]+ calculated for C21H16NO+: 298.1154 Da; found: 298.1154 Da.
4-(Spiro(fluorene-9,2′-oxiran)-3′-yl)benzonitrile: 5f (30%) white powder; m.p. 139–140 °C; 1H-NMR (200 MHz) (CDCl3) 7.69–7.60 (m, 4H); 7.55–7.52 (m, 2H); 7.47–7.23 (m, 4H); 6.92–6.85 (m, 1H); 6.33 (d, J = 7.7 Hz, 1H); 4.86 (s,1H). 13C-NMR (50 MHz) (CDCl3) 141.1 (CIV); 141.0 (CIV); 140.7 (CIV); 140.6 (CIV); 132.2 (2CHar); 130.5 (CHar); 129.7 (CHar); 129.6 (CHar); 129.1 (CIV); 128.6 (CIV); 127.8 (2CHar); 127.1 (CHar); 123.7 (CHar); 121.6 (CHar); 120.8 (CIV); 120.4 (CHar); 120.3 (CHar); 65.0 (CIV); 60.3 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C21H13NONa+: 318.0889 Da; found: 318.0889 Da.
(9H-Fluoren-9-yl)(p-tolyl)methanol 4g (24%); yellow powder; m.p. 86–87 °C; 1H-NMR (200 MHz) (CDCl3) 7.72 (d, J = 7.7 Hz, 1H); 7.41–7.04 (m, 11H); 5.02 (d, J = 5.0 Hz, 1H); 4.39 (d, J = 5.0 Hz, 1H); 2.38 (s, 3H). 13C-NMR (50 MHz) (CDCl3) 143.7 (CIV); 143.4 (CIV); 141.8 (CIV); 141.7 (CIV); 139.2 (CIV); 137.5 (CIV); 128.9 (2CHar); 127.6 (CHar); 127.5 (CHar); 126.7 (2CHar); 126.6 (2CHar); 126.3 (CHar); 125.6 (CHar); 119.8 (CHar); 119.7 (CHar); 76.2 (CH); 54.7 (CH); 21.2 (CH3). HRMS (ESI+): m/z [M + Na]+ calculated for C21H18ONa+: 309.1250 Da; found: 309.1249 Da.
3′-(4-Nitrophenyl)spiro(fluorene-9,2′-oxirane) 5h (17%); yellow powder; m.p. 152–153 °C; 1H-NMR (200 MHz) (CDCl3) 8.30 (dd, J = 8.6 and 2.4 Hz, 2H); 7.77–7.66 (m, 4H); 7.52–7.31 (m, 4H); 6.97–6.94 (m, 1H); 6.45 (d, J = 7.7 Hz, 1H); 4.99 (s, 1H). 13C-NMR (50 MHz) (CDCl3) 147.8 (CIV); 142.4 (CIV); 141.7 (CIV); 140.8 (CIV); 140.6 (CIV); 137.6 (CIV); 129.8 (CHar); 129.6 (CHar); 127.9 (2CHar); 127.8 (CHar); 127.1 (CHar); 123.7 (2CHar); 123.5 (CHar); 121.6 (CHar); 120.5 (CHar); 120.3 (CHar); 68.0 (CIV); 64.9 (CH). HRMS (ESI+): m/z [M + H]+ calculated for C20H14NO3+: 315.0895 Da; found: 315.0895 Da.
(9H-Fluoren-9-yl)(4-(trifluoromethyl)phenyl)methanol 4i (49%); white powder; m.p. 149–150 °C. 1H-NMR (200 MHz) (CDCl3) 7.72 (d, J = 7.6 Hz, 2H); 7.56 (d, J = 8.3 Hz, 2H); 7.42–7.21 (m, 8H); 5.31 (d, J = 5.3 Hz, 1H); 4.43 (d, J = 5.3 Hz, 1H). 13C-NMR (50 MHz) (CDCl3) 145.7 (CIV); 142.8 (CIV); 141.6 (2CIV); 141.8 (2CIV); 127.8 (2CHar); 127.0 (2CHar); 126.9 (CHar); 126.7 (CHar); 125.8 (CHar); 125.3 (CHar); 125.0 (CHar); 124.9 (CHar); 124.8 (CIV); 120.0 (CHar); 119.9 (CHar); 75.6 (CH); 54.6 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C21H15OF3Na+: 363.0967 Da; found: 363.0969 Da.
3′-(4-(Trifluoromethyl)phenyl)spiro[fluorene-9,2′-oxirane] 5i (6%); yellow powder; m.p. 75–76 °C. 1H-NMR (200 MHz) (CDCl3) 7.67–7.16 (m, 10H); 6.90–6.63 (m, 1H); 6.39–6.35 (dd, J = 6.4 et 1.4 Hz, 1H); 4.87 (s, 1H). 13C-NMR (50 MHz) (CDCl3) 145.3 (CIV); 144.2 (CIV); 141.3 (CIV); 140.2 (CIV); 140.0 (CIV); 129.7 (CHar); 129.4 (CHar); 127.6 (CIV); 127.5 (2CHar); 127.4 (2CHar); 125.5 (CHar); 124.1 (CHar); 123.7 (CHar); 123.6 (CHar); 120.1 (CHar); 120.0 (CIV); 84.7 (CIV); 78.9 (CH). HRMS (ESI): m/z [M − H] calculated for C21H12OF3: 337.0846 Da; found: 337.0846 Da.
(9H-Fluoren-9-yl)(furan-2-yl)methanol 4j (28%); brown powder; m.p. 91–92 °C. 1H-NMR (200 MHz) (CDCl3) 7.75 (d, J = 7.7 Hz, 2H); 7.50–7.20 (m, 6H); 7.05 (d, J = 7.6 Hz, 1H); 6.40–6.39 (m, 1H); 6.15–6.14 (m, 1H); 5.03 (d, J = 6.2 Hz, 1H); 4.56 (d, J = 6.2 Hz, 1H). 13C-NMR (50 MHz) (CDCl3) 154.9 (CIV); 143.1 (CIV); 143.0 (CIV); 141.7 (2CIV); 127.7 (2CHar); 127.0 (2CHar); 126.0 (2CHar); 124.9 (CHar); 119.7 (2CHar); 110.5 (CHar); 107.4 (CHar); 70.3 (CH); 52.4 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C18H14O2Na+: 285.0886 Da; found: 285.0884 Da.
3′-(Furan-2-yl)spiro(fluorene-9,2′-oxirane) 5j (19%); brown crystals; m.p. 135–136 °C. 1H-NMR (200 MHz) (CDCl3) 8.70–8.63 (m, 2H); 8.45–8.41 (m, 1H); 7.83–7.50 (m, 7H); 6.78–6.70 (m, 2H). 13C-NMR (50 MHz) (CDCl3) 148.7 (CIV); 148.3 (CIV); 143.4 (CHar); 131.6 (CIV); 131.4 (CIV); 128.0 (CHar); 127.1 (CHar); 126.7 (CHar); 126.4 (CIV); 124.9 (CHar); 124.8 (CHar); 124.3 (CHar); 123.5 (CHar); 122.7 (CHar); 122.5 (CHar); 111.8 (CHar); 111.4 (CHar); 106.5 (CIV).
(9H-Fluoren-9-yl)(pyridin-4-yl)methanol: 4k (42%); orange powder; m.p. 235–236 °C; 1H-NMR (200 MHz) (DMSO-d6) 8.08 (d, J = 6.0 Hz, 2H); 7.96–7.92 (m, 2H); 7.87–7.83 (m, 2H); 7.44–7.36 (m, 4H); 6.74 (d, J = 4.6 Hz, 1H); 6.68 (d, J = 6.0 Hz, 2H); 5.50 (d, J = 4.6 Hz, 1H). 13C-NMR (50 MHz) (DMSO-d6) 150.2 (CIV); 147.0 (2CHar); 143.2 (2CIV); 140.8 (2CIV); 127.2 (2CHar); 126.9 (2CHar); 125.8 (2CHar); 122.1 (2CHar); 118.9 (2CHar); 73.0 (CH); 63.73 (CH). HRMS (ESI+): m/z [M − H] calculated for C19H14NO: 272.1081 Da; found: 272.1081 Da.
4-(Spiro(fluorene-9,2'-oxiran)-3'-yl)pyridine: 5k (11%); Yellow powder; m.p. 197–198 °C 1H-NMR (200 MHz) (DMSO-d6) 8.13 (d, J = 8.0 Hz, 1H); 7.88 (d, J = 7.0 Hz, 2H); 7.36–7.18 (m, 4H); 6.50 (d, J = 7.0 Hz, 2H); 6.22 (d, J = 5.9 Hz, 1H); 5.83 (d, J = 5.9 Hz, 1H). 13C-NMR (50 MHz) (DMSO-d6) 147.7 (2CHar); 144.4 (2CIV); 143.5 (2CIV); 139.0 (CIV); 129.3 (CHar); 129.2 (CHar); 127.5 (CHar); 127.3 (CHar); 126.7 (CHar); 125.1 (CHar); 122.4 (2CHar); 119.8 (CHar); 119.6 (CHar); 76.9 (CH); 75.6 (CH). HRMS (ESI+): m/z [M + Na]+ calculated for C19H13NONa+: 294.0889 Da; found: 294.0891 Da.
(9H-Fluoren-9-yl)(pyridin-3-yl)methanol 4l (19%); white powder; m.p. 253–254 °C. 1H-NMR (200 MHz) (DMSO-d6) 8.16–8.14 (dd, J = 4.7 et 1.7 Hz, 1H); 7.88 (d, J = 1.9 Hz, 1H); 7.76–7.73 (m, 1H); 7.56–7.45 (m, 3H); 7.34–7.26 (m, 4H); 7.08–7.04 (dt, J = 7.9 et 1.9, 1H); 6.95–6.90 (dd, J = 7.7 ou 7.9 et 4.7 Hz, 1H); 6.03 (s, OH); 5.83 (d, J = 3.7 Hz, 1H); 5.17 (d, J = 3.7 Hz, 1H). 13C-NMR (50 MHz) (DMSO-d6) 148.4 (CHar); 147.3 (CHar); 146.3 (2CIV); 139.8 (2CIV); 134.2 (CHar); 128.2 (CHar); 128.1 (CHar); 126.7 (2CHar); 126.6 (CIV); 125.6 (CHar); 124.5 (CHar); 121.4 (CHar); 119.2 (CHar); 119.0 (CHar); 83.71 (CH); 76.3 (CH). HRMS (ESI+): m/z [M + H]+ calculated for C19H16NO+: 274.1226 Da; found: 274.1226 Da.
Ethyl 2-(9H-fluoren-9-yl)-2-hydroxypropanoate 4m (47%): orange oil. 1H-NMR (200 MHz) (CDCl3) 7.73 (d, J = 7.3 Hz, 2H); 7.63–7.54 (m, 2H); 7.39–7.35 (m, 4H); 4.31 (s, 1H); 4.05 (q, J = 7.1 Hz, 2H); 1.60 (s, 3H); 1.04 (t, J = 7.1 Hz, 3H). 13C-NMR (50 MHz) (CDCl3) 175.3 (CIV); 143.0 (CIV); 142.6 (CIV); 142.2 (CIV); 141.8 (CIV); 127.9 (CHar); 127.7 (CHar); 126.7 (2CHar); 126.0 (CHar); 125.7 (CHar); 119.7 (CHar); 119.6 (CHar); 77.2 (CIV); 61.7 (CH2); 56.0 (CH); 23.9 (CH3); 13.7 (CH3). HRMS (ESI+): m/z [M + NH4]+ calculated for C18H22NO3+: 300.1594 Da; found: 300.1592 Da.
Methyl 2-(9H-fluoren-9-yl)-3,3,3-trifluoro-2-hydroxypropanoate 4n (41%); yellow powder; m.p. 94–95 °C. 1H-NMR (200 MHz) (CDCl3) 7.77–7.71 (m, 3H); 7.45–7.39 (m, 2H); 7.33–7.25 (m, 3H); 4.61 (s, 1H); 3.70 (s, 3H). 13C-NMR (50 MHz) (CDCl3) 169.2 (CIV); 142.7 (CIV); 142.1 (CIV); 140.1 (CIV); 139.8 (CIV); 128.5 (CHar); 128.3 (CHar); 126.7 (CHar); 126.8 (2CHar); 125.5 (CHar); 119.8 (CHar); 119.6 (CHar); 80.0 (CIV); 79.5 (CIV); 53.8 (CH); 50.2 (CH3). HRMS (ESI+): m/z [M + NH4]+ calculated for C17H17NO3F3+: 340.1155 Da; found: 340.1157 Da.
Ethyl 2-(9H-fluoren-9-yl)-2-hydroxyacetate 4o (25%): yellow powder; m.p. 135–136 °C. 1H-NMR (200 MHz) (CDCl3) 7.75 (d, J = 7.1 Hz, 2H); 7.65 (m, 1H); 7.43–7.26 (m; 5H); 4.94 (d, J = 2.7 Hz, 1H); 4.43 (d, J = 2.7 Hz, 1H); 4.08 (q, J = 7.1 Hz, 2H); 1.03 (t, J = 7.1 Hz, 3H). 13C-NMR (50 MHz) (CDCl3) 173.2 (CIV); 143.3 (2CIV); 142.2 (2CIV); 127.8 (CHar); 127.7 (CHar); 127.2 (CHar); 127.0 (CHar); 124.7 (CHar); 124.5 (CHar); 119.9 (CIV); 119.8 (CHar); 72.6 (CH); 61.6 (CH); 48.31 (CH2); 13.7 (CH3). HRMS (ESI+): m/z [M + H]+ calculated for C17H17O3+: 269.1172 Da; found: 269.1171 Da.
Diethyl 2-(9H-fluoren-9-yl)-2-hydroxymalonate 4p (70%): white powder; m.p. 75–76 °C. 1H-NMR (200 MHz) (CDCl3) 7.74 (d, J = 7.4 Hz, 2H); 7.49 (d, J = 7.4 Hz, 2H); 7.43–7.36 (m, 2H); 7.30–7.22 (m, 2H); 4.93 (s, 1H); 4.25 (q, J = 7.2 Hz, 4H); 3.88 (bs, 1H); 1.19 (t, J = 7.2 Hz, 6H). 13C-NMR (50 MHz) (CDCl3) 169.5 (2CIV); 142.1 (2CIV); 141.6 (2CIV); 128.0 (2CHar); 127.0 (2CHar); 125.3 (2CHar); 119.7 (2CHar); 81.3 (CIV); 62.6 (2CH2); 54.6 (CH); 13.7 (2CH3). HRMS (ESI): m/z [M + H]+ calculated for C20H21O5+: 341.1384 Da; found: 340.1311 Da.

3.4. Reactivity of 9-Bromofluorene and 4-Cyanobenzaldehyde in the Presence of Triethylamine

Triethylamine (150 mg, 1.2 mmol) was added to a stirred solution of fluorenyl bromide 1 (100 mg, 0.5 mmol) with the 4-cyanobenzaldehyde (160 mg, 1.2 mmol) and a spatula of sodium sulfate in 4 mL of DMF, under air. The mixture was then stirred at −20 °C for 1 h and warmed to room temperature over a period of 24 h. Then 0.5 mL of water was added to quench the reaction. The solution was extracted with dichloromethane (3 × 30 mL), the combined organic layers were washed with brine (3 × 40 mL), and dried over MgSO4. The crude product was then obtained after evaporation of the solvent under reduced pressure. Purification by silica gel chromatographic column (dichloromethane: methanol) gave the 20% of the unreacted 9-bromofluorene with 15% yield of the 4-((9H-fluoren-9-ylidene)methyl)benzo-nitrile 8c and 7% yield of the 4-(spiro(fluorene-9,2′-oxiran)-3′-yl)benzonitrile 5f gave the unreacted 9-bromofluorene (20%) with 4-((9H-fluoren-9-ylidene)methyl)benzonitrile 6f (15%) and 4-(spiro(fluorene-9,2′-oxiran)-3′-yl)benzonitrile 5f (7%).
4-((9H-Fluoren-9-ylidene)methyl)benzonitrile: 6f (15%) yellow powder; m.p. 149–150 °C (Lit.: 150–151). 1H-NMR (200 MHz) (CDCl3) 7.97–7.94 (m, 1H); 7.75–7.73 (m, 1H); 7.41–7.30 (m, 6H); 7.12 (d, J = 8.3 Hz, 2H); 7.12 (d, J = 8.3 Hz, 2H); 6.80 (bs, 1H). Physical and spectroscopic data agree with those reported in the literature [38].

4. Conclusions

This strategy afforded a novel and convenient synthesis of various 9-fluorenylidene derivatives under mild reaction conditions. TDAE was used to generate the fluorenyl anion in situ and under practical conditions, which could be extended to electrophiles. In this study, TDAE, or another base present in the reaction mixture, was also able to promote the formation of epoxide derivatives. Moreover, because of their structural analogy with recently reported compounds, the anti-nociceptive properties of all intermediates are under active investigation.

Acknowledgments

This work is supported by the Centre National de la Recherche Scientifique. We express our thanks to V. Remusat for 1H- and 13C-NMR spectra recording and Valérie Monnier for measured HRMS.

Author Contributions

A.G.G.-T., T.T. and P.V. conceived and designed the study. A.G.G.-T. and T.T. designed the experiments and interpreted the results. A.G.G.-T., T.T. and P.V. wrote the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. El-Shekeil, A.; El-Sonbati, A.Z. Fluorenone thiosemicabazone complexes of bivalent metalions. Transit. Met. Chem. 1992, 17, 420–422. [Google Scholar] [CrossRef]
  2. Ahmad, T.; Kandil, F.; Moustapha, C. Synthesis, Characterization, Biological Evaluation and Antibacterial Activity of some Heterocyclic Fluorene Compounds Derived from Schiff Base. Int. J. ChemTech Res. 2015, 8, 447–458. [Google Scholar]
  3. Zhang, X.; Xu, J.-K.; Wang, J.; Wang, N.-L.; Kurihara, H.; Kitanaka, S.; Yao, X.-S. Bioactive Bibenzyl Derivatives and Fluorenones from Dendrobium nobile. J. Nat. Prod. 2007, 70, 24–28. [Google Scholar] [CrossRef] [PubMed]
  4. Hu, Q.-F.; Zhou, B.; Huang, J.-M.; Gao, X.-M.; Shu, L.-D.; Yang, G.-Y.; Che, C.-T. Antiviral Phenolic Compounds from Arundina gramnifolia. J. Nat. Prod. 2013, 76, 292–296. [Google Scholar] [CrossRef] [PubMed]
  5. Mueller, S.; Herzog, B.; Quass, K. Photostable Cosmetic or Dermatological Compositions Containing Sunscreens. PCT International Application WO 2006034968, 6 April 2006. [Google Scholar]
  6. Anonymous. 9-Aminoalkylfluorenes and Their Salts. Austrian Patent AT 368125, 10 September 1982. [Google Scholar]
  7. Britten, N.J.; Burns, J.W.; Hallberg, J.W.; Waldron, N.A.; Watts, J.L. Dispersible Formulations of an Anti-inflammatory Agent. PCT International Application WO 2004082588, 30 September 2004. [Google Scholar]
  8. Laine, L.; Connors, L.G.; Reicin, A.; Hawkey, C.J.; Burgos-Vargas, R.; Schnitzer, T.J.; Yu, Q.; Bombardier, C. Serious lower gastrointestinal clinical events with nonselective NSAID or coxib use. Gastroenterology 2003, 124, 288–292. [Google Scholar] [CrossRef] [PubMed]
  9. Giuglio-Tonolo, G.; Terme, T.; Médebielle, M.; Vanelle, P. Original reaction of p-nitrobenzyl chloride with aldehydes using tetrakis(dimethylamino)ethylene (TDAE). Tetrahedron Lett. 2003, 44, 6433–6435. [Google Scholar] [CrossRef]
  10. Giuglio-Tonolo, G.; Terme, T.; Médebielle, M.; Vanelle, P. Nitrobenzylation of α-carbonyl ester derivatives using TDAE approach. Tetrahedron Lett. 2004, 45, 5121–5124. [Google Scholar] [CrossRef]
  11. Amiri-Attou, O.; Terme, T.; Médebielle, M.; Vanelle, P. Original formation of benzyl benzoates by TDAE strategy. Tetrahedron Lett. 2008, 49, 1016–1020. [Google Scholar] [CrossRef]
  12. Juspin, T.; Terme, T.; Vanelle, P. TDAE Strategy Using α-Diketones: Rapid Access to 2,3-Diphenylquinoline and Acenaphtho[1,2-b]quinoline Derivatives. Synlett 2009, 1485–1489. [Google Scholar] [CrossRef]
  13. Khoumeri, O.; Montana, M.; Terme, T.; Vanelle, P. Rapid and efficient synthesis of 2-substituted-tetrahydropyrido[3,4-b]quinoxalines using TDAE strategy. Tetrahedron Lett. 2012, 53, 2410–2413. [Google Scholar] [CrossRef]
  14. Giuglio-Tonolo, A.G.; Spitz, C.; Terme, T.; Vanelle, P. An expeditious method for the selective cyclotrimerization of isocyanates initiated by TDAE. Tetrahedron Lett. 2014, 55, 2700–2702. [Google Scholar] [CrossRef]
  15. Juspin, T.; Laget, M.; Terme, T.; Azas, N.; Vanelle, P. TDAE-assisted synthesis of new imidazo[2,1-b]thiazole derivatives as anti-infectious agents. Eur. J. Med. Chem. 2010, 45, 840–845. [Google Scholar] [CrossRef] [PubMed]
  16. Montana, M.; Terme, T.; Vanelle, P. Original synthesis of oxiranes via TDAE methodology: Reaction of 2,2-dibromomethylquinoxaline with aromatic aldehydes. Tetrahedron Lett. 2005, 46, 8373–8376. [Google Scholar] [CrossRef]
  17. Roche, M.; Lacroix, C.; Khoumeri, O.; Franco, D.; Neyts, J.; Terme, T.; Leyssen, P.; Vanelle, P. Synthesis, biological activity and structure-activity relationship of 4,5-dimethoxybenzene derivatives inhibitor of rhinovirus. Eur. J. Med. Chem. 2014, 76, 445–459. [Google Scholar] [CrossRef] [PubMed]
  18. Murphy, J.A.; Zhou, S.; Thomson, D.W.; Schoenebeck, F.; Mahesh, M.; Park, S.R.; Tutle, T.; Berlouis, L.E.A. Highly Efficient Reduction of Unactivated Aryl and Alkyl Iodides by a Ground-State Neutral Organic Electron Donor. Angew. Chem. Int. Ed. 2005, 44, 1356–1360. [Google Scholar] [CrossRef] [PubMed]
  19. Murphy, J.A.; Khan, T.A.; Zhou, S.; Thomson, D.W.; Schoenebeck, F.; Mahesh, M.; Park, S.R.; Tuttle, T.; Berlouis, L.E.A. The Generation of Aryl Anions by Double Electron Transfer to Aryl Iodides from a Neutral Ground-State Organic Super-Electron Donor. Angew. Chem. Int. Ed. 2007, 46, 5178–5183. [Google Scholar] [CrossRef] [PubMed]
  20. Broggi, J.; Terme, T.; Vanelle, P. Organic Electron Donors as Powerful Single-Electron Reducing Agents in Organic Synthesis. Angew. Chem. Int. Ed. 2014, 53, 384–413. [Google Scholar] [CrossRef] [PubMed]
  21. Kuroboshi, M.; Waki, Y.; Tanaka, H. Palladium-Catalyzed Tetrakis(dimethylamino)ethylene-Promoted Reductive Coupling of Aryl Halides. J. Org. Chem. 2003, 68, 3938–3942. [Google Scholar] [CrossRef] [PubMed]
  22. Pawelke, G. Tetrakis(dimethylamino)ethylene/trifluoroiodomethane. A specific novel trifluorome-thylating agent. J. Fluor. Chem. 1989, 42, 429–433. [Google Scholar] [CrossRef]
  23. Takechi, N.; Aït-Mohand, S.; Médebielle, M.; Dolbier, W.R.J. Nucleophilic trifluoromethylation of acyl chlorides using the trifluoromethyl iodide/TDAE reagent. Tetrahedron Lett. 2002, 43, 4317–4319. [Google Scholar] [CrossRef]
  24. Pawelke, G. Reaction of tetrakis(dimethylamino)ethylene with CF2Br2 in the presence of secondary amines, formation of N-trifluoromethyl-dialkylamines. J. Fluor. Chem. 1991, 52, 229–234. [Google Scholar] [CrossRef]
  25. Since, M.; Terme, T.; Vanelle, P. Original TDAE strategy using α-halocarbonyl derivatives. Tetrahedron 2009, 65, 6128–6134. [Google Scholar] [CrossRef]
  26. Juspin, T.; Giuglio-Tonolo, G.; Terme, T.; Vanelle, P. First TDAE-Mediated Double Addition of Nitrobenzylic Anions to Aromatic Dialdehydes. Synthesis 2010, 5, 844–848. [Google Scholar]
  27. Pooput, C.; Dolbier, W.R., Jr.; Médebielle, M. Nucleophilic Perfluoroalkylation of Aldehydes, Ketones, Imines, Disulfides, and Diselenides. J. Org. Chem. 2006, 71, 3564–3568. [Google Scholar] [CrossRef] [PubMed]
  28. Pooput, C.; Medebielle, M.; Dolbier, W.R.J. A New and Efficient Method for the Synthesis of Trifluoromethylthio- and Selenoethers. Org. Lett. 2004, 6, 301–303. [Google Scholar] [CrossRef] [PubMed]
  29. Médebielle, M.; Kato, K.; Dolbier, W.R., Jr. Fluorinated hydrazones. Part 1: Reductive coupling reactions of chlorodifluoroacetylated dialkylhydrazones using tetrakis(dimethylamino)ethylene (TDAE). Tetrahedron Lett. 2003, 44, 7871–7873. [Google Scholar] [CrossRef]
  30. Montana, M.; Terme, T.; Vanelle, P. Original synthesis of α-chloroketones in azaheterocyclic series using TDAE approach. Tetrahedron Lett. 2006, 47, 6573–6576. [Google Scholar] [CrossRef]
  31. Bergmann, E.; Hervey, J. Über das Auftreten von freien substituierten Methylenen bei chemischen Reaktionen. Chem. Ber. 1929, 62, 803–916. [Google Scholar] [CrossRef]
  32. Stösser, R.; Thurne, J.-U.; Tomaschewski, U.; Ewert, P.; Eblik, P.; Sneide, W.; Hanke, T. EPR-Investigations on Radicals and Triplet States of Fluorence Derivatives. Z. Naturforsh. A Phys. Sci. 1982, 37, 1241–1246. [Google Scholar]
  33. Goodman, C.C.; Roof, A.C.; Tillman, E.S.; Ludwig, B.; Chon, D.; Weigley, M.I. Synthesis and characterization of fluorene end-labeled polystyrene with atom transfer radical polymerization. J. Polym. Sci. Pol. Chem. 2005, 43, 2657–2665. [Google Scholar] [CrossRef]
  34. Eisch, J.J.; Fregene, P.O. Vanadium(I) Chloride and Lithium Vanadium(I) Dihydride as Selective Epimetallating Reagents for π- and σ- Bonded Organic Substrates. Eur. J. Org. Chem. 2008, 26, 4482–4492. [Google Scholar] [CrossRef]
  35. Ghera, E.; Sprinzak, Y. Reactions of active methylene compounds in pyridine soln. II. Aldol-type reactions of indene and fluorene. J. Am. Chem. Soc. 1960, 82, 4945–4952. [Google Scholar] [CrossRef]
  36. Mladenova, G.; Singh, G.; Acton, A.; Chen, L.; Rinco, L.J.; Johnston, E.L.-R. Photochemical Pinacol Rearrangements of Unsymmetrical Diols. J. Org. Chem. 2004, 69, 2017–2023. [Google Scholar] [CrossRef] [PubMed]
  37. Zhiqin, J.; Shuping, W.; Hansen, S. Studies on photooxidations. II. Electron transfer photooxidation of 9-benzylidenefluorene. Hua Hsüeh Hsüeh Pao 1988, 46, 294–297. [Google Scholar]
  38. Allen, R.E.; Schumann, E.L.; Day, W.C.; Van Campen, M.G.J. Amidines of certain substituted triphenylethylenes. J. Am. Chem. Soc. 1958, 80, 591–598. [Google Scholar] [CrossRef]
  • Sample Availability: Samples of the compounds 4a4g; 4i4p and 5a5c; 5f5k; 6f are available from the authors.
Figure 1. Structures of biological active molecules and TDAE.
Figure 1. Structures of biological active molecules and TDAE.
Molecules 21 01408 g001
Scheme 1. Optimization of the reaction of fluorenyl bromide 1 with 4-chlorobenzaldehyde 2a using TDAE.
Scheme 1. Optimization of the reaction of fluorenyl bromide 1 with 4-chlorobenzaldehyde 2a using TDAE.
Molecules 21 01408 sch001
Scheme 2. Proposed mechanism.
Scheme 2. Proposed mechanism.
Molecules 21 01408 sch002
Scheme 3. Reactivity of 9-bromofluorene and 4-cyanobenzaldehyde in the presence of trimethylamine.
Scheme 3. Reactivity of 9-bromofluorene and 4-cyanobenzaldehyde in the presence of trimethylamine.
Molecules 21 01408 sch003
Table 1. Reactions of fluorenyl bromide 1 and aldehyde 2a with TDAE under various conditions.
Table 1. Reactions of fluorenyl bromide 1 and aldehyde 2a with TDAE under various conditions.
EntryAldehyde 2a (eq.)TDAE (eq.)SolventYield 1,2 of Dimer 3Yield 1,2 of 4a
121DMF44%29%
231DMF8%50%
332DMF10%48%
441DMF8%46%
531THF12%48%
631DMF 39%56%
731CH3CN16%30%
831DMSO20%12%
931pyridine11%34%
1 Isolated yields; 2 Typical procedure: to a vigorously stirred solution of fluorenyl bromide 1 derivative in 4 mL anhydrous solvent, at −20 °C, under N2; 3 Moist DMF was used in the presence of a spatula of sodium sulfate in the reaction mixture and the reaction was run under air.
Table 2. The scope of the reactivity of 1 in the presence of various electrophiles under TDAE reaction conditions.
Table 2. The scope of the reactivity of 1 in the presence of various electrophiles under TDAE reaction conditions.
Molecules 21 01408 i001
EntryElectrophilesYield 1,2 of 4Yield 1,2 of 5
R1R2
12a4-ClC6H4H56% (4a)14% (5a)
22bC6H5H57% (4b)17% (5b)
32c4-BrC6H4H75% (4c)10% (5c)
42d4-OMeC6H4H34% (4d)
52e4-FC6H4H54% (4e)
62f4-CNC6H4H41% (4f)30% (5f)
72g4-MeC6H4H24% (4g)
82h4-(NO2)C6H4H 17% (5h)
92i4-CF3 C6H4H49% (4i)6% (5i)
102j2-furylH28% (4j)19% (5j)
112k4-pyridinylH42% (4k)11% (5k)
122l3-pyridinylH19% (4l)
132mMeCO2Et47% (4m)
142nCF3CO2Me41% (4n)
152oHCO2Et25% (4o)
162pCO2EtCO2Et70% (4p)
172qC6H5Et
1 Isolated yields; 2 Typical procedure: to a vigorously-stirred solution of 9-bromofluorene 1 in 4 mL moist DMF with a spatula of sodium sulfate, under air, TDAE was slowly added at −20 °C. The solution was then stirred 1 h at this temperature followed by 2 h at ambient temperature.

Share and Cite

MDPI and ACS Style

Giuglio-Tonolo, A.G.; Terme, T.; Vanelle, P. Original Synthesis of Fluorenyl Alcohol Derivatives by Reductive Dehalogenation Initiated by TDAE. Molecules 2016, 21, 1408. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules21101408

AMA Style

Giuglio-Tonolo AG, Terme T, Vanelle P. Original Synthesis of Fluorenyl Alcohol Derivatives by Reductive Dehalogenation Initiated by TDAE. Molecules. 2016; 21(10):1408. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules21101408

Chicago/Turabian Style

Giuglio-Tonolo, Alain Gamal, Thierry Terme, and Patrice Vanelle. 2016. "Original Synthesis of Fluorenyl Alcohol Derivatives by Reductive Dehalogenation Initiated by TDAE" Molecules 21, no. 10: 1408. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules21101408

Article Metrics

Back to TopTop