Next Article in Journal
Progress in Electrohydrodynamic Atomization Preparation of Energetic Materials with Controlled Microstructures
Next Article in Special Issue
Lewis Acid-Induced Dinitrogen Cleavage in an Anionic Side-on End-on Bound Dinitrogen Diniobium Hydride Complex
Previous Article in Journal
Volumetric Scalability of Microfluidic and Semi-Batch Silk Nanoprecipitation Methods
Previous Article in Special Issue
π–π Stacking Interaction of Metal Phenoxyl Radical Complexes
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation

Department of Applied Chemistry, School of Engineering, The University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
*
Author to whom correspondence should be addressed.
Submission received: 7 March 2022 / Revised: 30 March 2022 / Accepted: 2 April 2022 / Published: 6 April 2022

Abstract

:
A series of manganese complexes bearing an anionic pyrrole-based PNP-type pincer ligand and an anionic benzene-based PCP-type pincer ligand is synthesized and characterized. The reactivity of these complexes toward ammonia formation and silylamine formation from dinitrogen under mild conditions is evaluated to produce only stoichiometric amounts of ammonia and silylamine, probably because the manganese pincer complexes are unstable under reducing conditions.

1. Introduction

The production of ammonia from dinitrogen in the air, known as nitrogen fixation, has been an essential chemical process in industry and biology. The industrial nitrogen fixation, known as the Haber–Bosch process, requires harsh reaction conditions and dihydrogen derived from fossil fuels [1]. The development of new systems capable of fixing dinitrogen into ammonia efficiently under mild reaction conditions has remained a challenging goal.
Transition-metal catalyzed nitrogen fixation under mild reaction conditions has gained much attention in the last two decades [2,3,4,5,6,7,8,9,10,11]. Reduction of dinitrogen into ammonia [12,13,14,15,16,17,18,19,20,21,22,23,24,25] or its equivalents, such as hydrazine [26], silylamines [27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44], and borylamines [45], catalyzed by well-defined transition-metal complexes was found by several research groups. We have found that transition-metal complexes bearing anionic pincer ligands worked as highly active catalysts for nitrogen fixation. Recently, we have succeeded in the development of iron-, cobalt-, and vanadium-catalyzed formation of ammonia and hydrazine from dinitrogen under mild reaction conditions using the corresponding dinitrogen complexes bearing an anionic pyrrole-based PNP-type ligand as catalysts [46,47,48]. The PNP ligand was originally developed by groups of Gade, Mani, and Tonzetich [49,50,51]. More recently, we have reported that iron-dinitrogen complexes supported by a benzene-based PCP-type pincer ligand, one of the classical pincer ligands [52], exhibited a high catalytic activity for reduction of dinitrogen into ammonia and hydrazine [53]. In addition, a rhodium-dinitrogen complex supported by the same PNP-type ligand and an iridium-dinitrogen complex bearing the same benzene-based PCP-type ligand have been found to work as effective catalysts for the formation of silylamine from dinitrogen under mild reaction conditions [54,55].
Based on these backgrounds, we have focused on the development of manganese-catalyzed nitrogen fixation under mild reaction conditions. Manganese is the third most abundant transition-metal on the earth. However, successful examples of manganese-catalyzed nitrogen fixation under mild conditions are limited to the silylamine formation from dinitrogen [35,39]. Herein, we have prepared a series of manganese complexes bearing the anionic pyrrole-based PNP-type pincer ligand and the anionic benzene-based PCP-type pincer ligand to investigate their reactivity for the ammonia and silylamine formation under mild reaction conditions.

2. Result and Discussion

2.1. Synthesis and Characterization of Manganese Complexes

The reaction of [MnCl2(thf)2] (thf = tetrahydrofuran) with Li-PNP (PNP = 2,5-bis(di-tert-butylphosphinomethyl)pyrrolide) in the presence pyridine in THF at room temperature for 18 h gave a Mn(II) complex bearing the PNP-type pincer ligand [Mn(PNP)Cl(pyridine)] (1) in 48% yield (Scheme 1). The structure of 1 was confirmed by X-ray analysis, and an ORTEP drawing of 1 is shown in Figure 1. Table 1 presents selected bond lengths and angles of 1. Complex 1 has a distorted square pyramidal geometry, where pyridine and chloride ligands are coordinated to the cobalt center supported by the PNP ligand. Complex 1 was paramagnetic with an effective solution magnetic moment of 5.8 ± 0.5 μB at room temperature by Evans’ method, in agreement with the theoretical value of S = 5/2 state (5.9 μB). This result indicates that the manganese center of 1 is assigned as a d5 high-spin state.
We attempted to prepare the corresponding manganese-dinitrogen complex by reduction of 1 with 1.1 equiv of KC8 in THF at room temperature under 1 atm N2 atmosphere (Scheme 2). However, no dinitrogen-coordinated species was observed by the IR spectrum. Instead, the recrystallization of the reaction mixture afforded a Mn(II) complex bearing the two PNP ligands [Mn(PNP)2] in 21% yield, which was previously reported by Tonzetich and coworkers [56].
The reaction of [Mn{N(SiMe3)2}2](thf)2 with H-PNP afforded a Mn(II)-amide complex bearing the PNP-type ligand [Mn(PNP)(N(SiMe3)2)] (2) in 75% yield (Scheme 3). An ORTEP drawing of 2 is shown in Figure 1, and bond lengths and angles of 2 are listed in Table 2. Complex 2 has a four-coordinated manganese center with a distorted tetrahedral structure. The Mn–P lengths of 2 (ca. 2.76 Å) are slightly longer than those of 1 (ca. 2.72 Å), while the P–Mn–P angle of 2 (132°) is smaller than that of 1 (147°). These structural differences between 1 and 2 may derive from the different coordination geometry around the cobalt centers. Complex 2 displayed a room-temperature magnetic moment of 6.0 ± 0.6 μB in solution, which indicates an S = 5/2 high-spin Mn(II) state.
The reaction of [MnBr2(thf)2] with Li-PCP (PCP = 2,6-bis(di-tert-butylphosphinomethyl)phenyl), which was generated in situ from Br-PCP with n-butyllithium, in the presence of 1,2-dibromoethane as an oxidant in THF at room temperature for 4 h gave a Mn(III) complex bearing the PCP-type ligand [Mn(PCP)Br2] (3) in 44% yield (Scheme 4). X-ray analysis revealed the molecular structure of 3, and an ORTEP drawing and selected metric parameters are shown in Figure 1 and Table 3, respectively. The manganese center of 3 has a distorted square pyramidal geometry with two bromide ligands and the PCP ligand. One of the bromide ligands occupies the trans position to the C atom of the PCP ligand to make an equatorial plane, and the other is in the axial position. Shorter Mn–P bonds (ca. 2.49 Å) of 3 compared to those of 1 and 2 (2.72–2.76 Å) can be attributable to the six-membered backbone of the PCP ligand. The solution magnetic moment of 3 was 4.3 ± 0.4 μB at room temperature. Because this value is close to the theoretical value for an S = 2 high-spin state (4.9 μB), 3 is assignable as an S = 2 state. Reported Mn(III)-aryl complexes exhibited effective magnetic moments between 4.8–5.3 μB [57,58,59].

2.2. Reactivity for Nitrogen Fixation

2.2.1. Attempted Catalytic Ammonia Formation Using 13 as Catalysts

We investigated the catalytic reduction of dinitrogen into ammonia or hydrazine using the synthesized manganese complexes 13 as catalysts under the conditions previously applied for our group [46,47,48], which were initially reported by Peters [19]. Typical results are shown in Table 4. The reaction of an atmospheric pressure of dinitrogen with 40 equiv of KC8 as a reductant and 38 equiv of [H(OEt2)2]BArF4 (ArF = 3,5-(CF3)2C6H3) as a proton source in the presence of a catalytic amount of 1 in Et2O was conducted at −78 °C for 1 h. As a result, neither ammonia nor hydrazine was obtained, while 7.8 equiv of dihydrogen based on the Mn atom were formed as a product (Table 4, entry 1). The use of 2 as a catalyst afforded 1.4 equiv of ammonia and 7.5 equiv of dihydrogen under the same reaction conditions (Table 4, entry 2), where 1 equiv of ammonia is considered to be derived from the N(SiMe3)2 ligand in 2. We also attempted catalytic ammonia formation using complex 3 as a catalyst; however, no formation of ammonia nor hydrazine was observed. (Table 4, entry 3). These results indicate that the newly synthesized manganese complexes bearing the anionic PNP-type or PCP-type ligands did not work as catalysts for catalytic ammonia or hydrazine formation from dinitrogen.

2.2.2. Attempted Catalytic Silylamine Formation Using 13 as Catalysts

We then tested 13 for their potential as catalysts for the formation of silylamine (N(SiMe3)3), which is easily converted to ammonia upon hydrolysis. Hence silylamine formation is regarded as an alternative nitrogen fixation process [8]. Typical results are shown in Table 5. The reaction of an atmospheric pressure of dinitrogen with 600 equiv of Na as a reductant and 600 equiv of Me3SiCl as a silylating reagent in the presence of 1 as a catalyst in THF was performed at room temperature for 20 h, followed by hydrolysis of the reaction mixture to convert silylamine to ammonia for quantification. This reaction afforded only 0.4 equiv of ammonia based on the Mn atom in the catalyst (Table 5, entry 1). When KC8 was used as a reductant in place of Na, 1.4 equiv of ammonia were obtained based on the Mn atom in the catalyst (Table 5, entry 2). The catalytic activity of 2 toward silylamine formation was also investigated in the same reaction conditions to give less than 2 equiv of ammonia (Table 5, entries 3 and 4). The use of 3 as a catalyst in the presence of Na or KC8 as a reductant afforded 2.5 or 2.2 equiv of ammonia based on the Mn atom in the catalyst, respectively, which are regarded as superstoichiometric amounts (Table 5, entries 5 and 6). These results suggest that these manganese complexes did not work as catalysts for silylamine formation under the current conditions.

3. Materials and Methods

3.1. General Methods

1H NMR (400 MHz), 13C{1H} NMR (100 MHz), and 31P{1H} NMR (162 MHz) spectra were recorded on a JEOL ECS-400 spectrometer (Tokyo, Japan) or a JEOL ECZ-400S spectrometer in a suitable solvent, and spectra were referenced to residual solvent (1H, 13C{1H}) or external standard (31P{1H}: H3PO4). IR spectra were recorded on a JASCO FT/IR 4100 Fourier Transform infrared spectrometer (JASCO, Tokyo, Japan) or a Shimadzu IRSpirit spectrometer (Shimadzu, Kyoto, Japan). UV-vis absorption spectra were recorded on a Shimadzu UV-1850. Magnetic susceptibility was measured in C6D6 using the Evans method. Elemental analyses were performed at the Microanalytical Center of The University of Tokyo.
All manipulations were carried out under an atmosphere of nitrogen or argon by using standard Schlenk techniques or glovebox techniques, unless otherwise stated. Solvents were dried by general methods and degassed before use. Me3SiCl was distilled prior to use. Li-PNP [47], H-PNP [60,61,62], [MnCl2(thf)2] [63], [MnBr2(thf)2] [64], [Mn{N(SiMe3)2}](thf)2 [65], [H(OEt2)2]BArF4 [20,66], and KC8 [67] were prepared according to the literature methods. All the other reagents were commercially available (reagent grade from TCI (Tokyo, Japan), FUJIFILM Wako Pure Chemical (Osaka, Japan), and Sigma-Aldrich (St. Louis, MO, USA)) and used as received.

3.2. Synthesis

3.2.1. Preparation of PCP–Br

A mixture of 2-bromo-1,3-bis(bromomethyl)benzene (2.61 g, 7.61 mmol) and tBu2PH (2.94 g, 20.1 mmol) in acetone (55 mL) was stirred at reflux temperature for 2 h. The mixture was cooled to room temperature, and then the solvent was removed in vacuo. The residue was washed with Et2O (8 mL, 3 times). NaOAc (5.0 g), Et2O (20 mL), and water (15 mL) were added to the white residue. The product was extracted by Et2O (15 mL, 3 times). The combined extracts were dried over anhydrous MgSO4, and then the mixture was filtered. The filtrate was evaporated to dryness to afford Br-PCP as a white solid (2.83 g, 5.98 mmol, 79%). 1H NMR (C6D6): δ 7.68 (d, J = 7.6 Hz, 2H), 7.04 (t, J = 7.6 Hz, 1H), 3.11 (s, 4H), 1.10 (d, J = 10.8 Hz, 36H). 13C{1H} NMR (C6D6): δ 141.9 (d, J = 13.4 Hz), 130.0 (d, J = 19.1 Hz), 128.5, 126.5, 32.0 (d, J = 23.9 Hz), 29.8 (d, J = 14.3 Hz), 29.7 (d, J = 24.8 Hz). 31P{1H} NMR (C6D6): δ 34.1 (s). Anal. Calcd. for C24H43BrP2: C, 60.88; H, 9.15. Found: C, 60.87, H, 9.03.

3.2.2. Preparation of 1

To a solution of Li-PNP (195 mg, 0.501 mmol) in THF (10 mL), pyridine (82 μL, 1.02 mmol) and [MnCl2(thf)2] (134 mg, 0.496 mmol) were added at room temperature. The reaction mixture was stirred at room temperature for 18 h, and the solvent was removed in vacuo. Et2O (10 mL) was added to the brown residue. The suspension was filtered through Celite, and the filter cake was washed with Et2O (3 mL, 4 times). The combined filtrate was concentrated into 5 mL. The resultant mixture was kept at −30 °C to give a yellow solid, which was collected by filtration, washed with a small amount of cold pentane, and dried in vacuo to afford 1 as a yellow solid (132 mg, 0.239 mmol, 48%). Single crystals of 1 suitable for X-ray crystallography were obtained as yellow crystals from Et2O at −30 °C. Magnetic susceptibility: μeff = 5.8 ± 0.5 μB in C6D6 at 298 K. Anal. Calcd. for C27H47ClN2P2Mn: C, 58.75; H, 8.58; N, 5.07. Found: C, 58.74; H, 8.57; N, 5.23.

3.2.3. Preparation of 2

To a solution of [Mn{N(SiMe3)2}](thf)2 (97.7 mg, 0.188 mmol) in THF (2 mL), a solution of H-PNP (68.3 mg, 0.178 mmol) in THF (2 mL) was added dropwise at room temperature. The reaction mixture was stirred at room temperature for 14 h, and then the solvent was removed in vacuo. Pentane (2 mL) was added to the pale-yellow residue. The suspension was filtered through Celite, and the filter cake was washed with pentane. The combined filtrate was concentrated into 1 mL. The resultant mixture was kept at −30 °C to give a pale orange solid, which was collected by decantation, washed with a small amount of cold pentane, and dried in vacuo to afford 2 as a pale orange solid (80.0 mg, 0.134 mmol, 75%). Single crystals of 2 suitable for X-ray crystallography were obtained as yellow crystals from pentane at −30 °C. Magnetic susceptibility: μeff = 6.0 ± 0.6 μB in C6D6 at 298 K. Anal. Calcd. for C28H60Si2N2P2Mn: C, 56.25; H, 10.12; N, 4.69. Found: C, 56.40; H, 10.20; N, 4.72.

3.2.4. Preparation of 3

To a solution of Br-PCP (142 mg, 0.300 mmol) in THF (5 mL), nBuLi (1.55 M in hexane, 195 μL, 0.302 mmol) was added at room temperature. The reaction mixture was stirred at room temperature for 1 min, then [MnBr2(thf)2] (107 mg, 0.298 mmol) and 1,2-dibromoethane (31 μL, 0.36 mmol) in THF (5 mL) were added to the mixture. The reaction mixture was stirred at room temperature for 4 h, and then the solvent was removed in vacuo. Benzene (5 mL) was added to the reddish-brown residue. The suspension was filtered through Celite, and the filter cake was washed with benzene (1 mL, 4 times). The combined filtrate was concentrated into 3 mL. Slow addition of hexane (12 mL) to the mixture afforded red crystals suitable for X-ray crystallography of 3, which were collected by decantation and dried in vacuo to give 0.5 C6H6 as a red crystalline solid (81.1 mg, 0.133 mmol, 44%). Magnetic susceptibility: μeff = 4.3 ± 0.4 μB in C6D6 at 298 K. Anal. Calcd. for C27H46Br2P2Mn (0.5 C6H6): C, 50.10; H, 7.16. Found: C, 50.77; H, 7.04.

3.3. Reactivity for Nitrogen Fixation

3.3.1. Attempted Catalytic Ammonia Formation Using 13 as Catalysts

A typical experimental procedure for reduction of dinitrogen to ammonia or hydrazine using 1 is described below. In a 50 mL Schlenk flask, 1 (5.2 mg, 10.0 μmol), KC8 (54.1 mg, 0.400 mmol) and [H(OEt2)2]BArF4 (385 mg, 0.380 mmol) were placed. After the mixture was cooled to −78 °C, cold Et2O (5 mL) was added to the mixture. After the mixture was stirred at −78 °C for 1 h, the mixture was warmed to room temperature and further stirred at room temperature for 20 min. The amount of dihydrogen evolved in the reaction was determined by gas chromatography (GC) analyses. The reaction mixture was evaporated under reduced pressure, and the distillate was trapped in a dilute H2SO4 solution (0.5 M, 10 mL). Aqueous solution of potassium hydroxide (30 wt%, 5 mL) was added to the residue, and the mixture was distilled into the same dilute H2SO4 solution (0.5 M, 10 mL). The amount of NH3 present in H2SO4 solution was determined by the indophenol method [68]. The amount of NH2NH2 present in H2SO4 solution was determined by the p-(dimethylamino)benzaldehyde method [69].

3.3.2. Attempted Catalytic Silylamine Formation Using 13 as Catalysts

A typical experimental procedure for reduction of dinitrogen to silylamine using 1 is described below. In a 50 mL Schlenk flask, 1 (2.4 mg, 5.0 μmol) and KC8 (406 mg, 3.00 mmol) were placed. After Et2O (6 mL) and Me3SiCl (380 μL, 3.00 mmol) were added to the mixture in the Schlenk, the mixture was stirred at room temperature for 40 h under N2 (1 atm). Dilute H2SO4 solution (0.5 M, 10 mL) was added to the mixture. The mixture was stirred at room temperature for 1 h. Aqueous solution of KOH (30 wt%, 5 mL) was added to the reaction mixture, and the mixture was distilled into another dilute H2SO4 solution (0.5 M, 10 mL). The amount of ammonia was determined by the indophenol method [68].

3.4. X-ray Diffraction

Crystallographic data of 13 are summarized in Table 6. Diffraction data for 13 were collected for the 2θ range of 4° to 55° at −100 °C (for 1 and 2) or −180 °C (for 3) on a Rigaku R-AXIS RAPID imaging plate area detector (Rigaku, Tokyo, Japan) with multi-layer mirror monochromated Mo-Kα (λ = 0.71075 Å) radiation with VariMax optics. Intensity data were corrected for Lorentz and polarization effects and for empirical absorptions (ABSCOR [70] for 13), while structure solutions and refinements were performed by using the CrystalStructure package [71]. The positions of non-hydrogen atoms were determined by direct methods (SHELXT version 2014/5 [72] for 1 and 3; SHELXS version 2013/1 [73] for 2) and subsequent Fourier syntheses (SHELXL [74] version 2016/6) and were refined on Fo2 using all unique reflections by full-matrix least-squares with anisotropic thermal parameters. All the hydrogen atoms were placed at the calculated positions with fixed isotropic parameters. Crystal of 1 and 3 contains an inverted structure as a disorder, which was solved as merohedral twins. Crystal of 2 contains heavy disorders among a tert-butyl group, which were solved as disorders in a ratio of 0.52:0.48 for C(21A)–C(22A) and C(21B)–C(22B). All the hydrogen atoms attached to these carbon atoms could not be located, causing checkCIF/PLATON report Alert level B (PLAT043_ALERT_1_B Calculated and Reported Mol. Weight Differ by 6.06).

4. Conclusions

In the current work, three manganese complexes bearing anionic PNP- and PCP-type pincer ligands were synthesized and fully characterized. Their catalytic activities for nitrogen fixation, such as ammonia and silylamine formation, were extensively studied. As a result, unfortunately, these manganese complexes did not promote the catalytic formation of ammonia or silylamine from nitrogen gas under mild reaction conditions. These results are in contrast to the previous results that vanadium, iron, cobalt, rhodium, and iridium complexes bearing the identical anionic pincer ligands worked as catalysts for ammonia formation or silylamine formation under mild reaction conditions [46,47,48,54,55]. Currently, we consider that the manganese pincer complexes are unstable under reducing conditions to cause catalyst decomposition. We hope the present result will help researchers to design nitrogen fixation systems using transition-metal complexes as catalysts.

Author Contributions

Conceptualization, S.K. and Y.N.; methodology, S.K., S.W. and T.K.; validation, S.K., S.W. and T.K.; formal analysis, S.K., S.W. and T.K.; investigation, S.K., S.W. and T.K.; writing—original draft preparation, S.K., S.W. and Y.N.; writing—review and editing, S.K. and Y.N.; supervision, Y.N.; project administration, Y.N.; funding acquisition, S.K. and Y.N. All authors have read and agreed to the published version of the manuscript.

Funding

The present project is supported by CREST, JST (Grant JPMJCR1541). We acknowledge Grants-in-Aid for Scientific Research (Grants JP20H05671, JP20K21203, and JP20K15295) from JSPS and MEXT.

Data Availability Statement

The crystallographic data are available from the Cambridge Crystallographic Data Centre (CCDC).

Conflicts of Interest

The authors declare no conflict of interest.

Sample Availability

Not applicable.

References

  1. Liu, H. Ammonia Synthesis Catalysts: Innovation and Practice; World Scientific/Chemical Industry Press: Beijing, China, 2013. [Google Scholar] [CrossRef] [Green Version]
  2. Masero, F.; Perrin, M.A.; Dey, S.; Mougel, V. Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes. Chem.-Eur. J. 2021, 27, 3892–3928. [Google Scholar] [CrossRef] [PubMed]
  3. Tanabe, Y.; Nishibayashi, Y. Comprehensive Insights into Synthetic Nitrogen Fixation Assisted by Molecular Catalysts under Ambient or Mild Conditions. Chem. Soc. Rev. 2021, 50, 5201–5242. [Google Scholar] [CrossRef] [PubMed]
  4. Kuriyama, S.; Nishibayashi, Y. Development of Catalytic Nitrogen Fixation Using Transition Metal Complexes Not Relevant to Nitrogenases. Tetrahedron 2021, 83, 131986. [Google Scholar] [CrossRef]
  5. Ashida, Y.; Nishibayashi, Y. Catalytic Conversion of Nitrogen Molecule into Ammonia Using Molybdenum Complexes under Ambient Reaction Conditions. Chem. Commun. 2021, 57, 1176–1189. [Google Scholar] [CrossRef]
  6. Chalkley, M.J.; Drover, M.W.; Peters, J.C. Catalytic N2-to-NH3 (or -N2H4) Conversion by Well-Defined Molecular Coordination Complexes. Chem. Rev. 2020, 120, 5582–5636. [Google Scholar] [CrossRef]
  7. Kim, S.; Loose, F.; Chirik, P.J. Beyond Ammonia: Nitrogen–Element Bond Forming Reactions with Coordinated Dinitrogen. Chem. Rev. 2020, 120, 5637–5681. [Google Scholar] [CrossRef]
  8. Tanabe, Y.; Nishibayashi, Y. Recent Advances in Catalytic Silylation of Dinitrogen Using Transition Metal Complexes. Coord. Chem. Rev. 2019, 389, 73–93. [Google Scholar] [CrossRef]
  9. Stucke, N.; Flöser, B.M.; Weyrich, T.; Tuczek, F. Nitrogen Fixation Catalyzed by Transition Metal Complexes: Recent Developments. Eur. J. Inorg. Chem. 2018, 2018, 1337–1355. [Google Scholar] [CrossRef]
  10. Nishibayashi, Y. Development of Catalytic Nitrogen Fixation Using Transition Metal–Dinitrogen Complexes under Mild Reaction Conditions. Dalton Trans. 2018, 47, 11290–11297. [Google Scholar] [CrossRef]
  11. Burford, R.J.; Fryzuk, M.D. Examining the Relationship between Coordination Mode and Reactivity of Dinitrogen. Nat. Rev. Chem. 2017, 1, 26. [Google Scholar] [CrossRef]
  12. Doyle, L.R.; Wooles, A.J.; Jenkins, L.C.; Tuna, F.; McInnes, E.J.L.; Liddle, S.T. Catalytic Dinitrogen Reduction to Ammonia at a Triamidoamine–Titanium Complex. Angew. Chem. Int. Ed. 2018, 57, 6314–6318. [Google Scholar] [CrossRef] [Green Version]
  13. Ashida, Y.; Egi, A.; Arashiba, K.; Tanaka, H.; Mitsumoto, T.; Kuriyama, S.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Reduction of Dinitrogen into Ammonia and Hydrazine Using Chromium Complexes Bearing PCP-Type Pincer Ligand. Chem.-Eur. J. 2022, 28. [Google Scholar] [CrossRef]
  14. Yandulov, D.V.; Schrock, R.R. Catalytic Reduction of Dinitrogen to Ammonia at a Single Molybdenum Center. Science 2003, 301, 76–78. [Google Scholar] [CrossRef] [Green Version]
  15. Arashiba, K.; Miyake, Y.; Nishibayashi, Y. A Molybdenum Complex Bearing PNP-Type Pincer Ligands Leads to the Catalytic Reduction of Dinitrogen into Ammonia. Nat. Chem. 2011, 3, 120–125. [Google Scholar] [CrossRef]
  16. Arashiba, K.; Eizawa, A.; Tanaka, H.; Nakajima, K.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Nitrogen Fixation via Direct Cleavage of Nitrogen–Nitrogen Triple Bond of Molecular Dinitrogen under Ambient Reaction Conditions. Bull. Chem. Soc. Jpn. 2017, 90, 1111–1118. [Google Scholar] [CrossRef]
  17. Ashida, Y.; Arashiba, K.; Nakajima, K.; Nishibayashi, Y. Molybdenum-Catalysed Ammonia Production with Samarium Diiodide and Alcohols or Water. Nature 2019, 568, 536–540. [Google Scholar] [CrossRef]
  18. Meng, F.; Kuriyama, S.; Tanaka, H.; Egi, A.; Yoshizawa, K.; Nishibayashi, Y. Ammonia Formation Catalyzed by a Dinitrogen-Bridged Dirhenium Complex Bearing PNP-Pincer Ligands under Mild Reaction Conditions. Angew. Chem. Int. Ed. 2021, 60, 13906–13912. [Google Scholar] [CrossRef]
  19. Anderson, J.S.; Rittle, J.; Peters, J.C. Catalytic Conversion of Nitrogen to Ammonia by an Iron Model Complex. Nature 2013, 501, 84–87. [Google Scholar] [CrossRef] [Green Version]
  20. Del Castillo, T.J.; Thompson, N.B.; Peters, J.C. A Synthetic Single-Site Fe Nitrogenase: High Turnover, Freeze-Quench 57Fe Mössbauer Data, and a Hydride Resting State. J. Am. Chem. Soc. 2016, 138, 5341–5350. [Google Scholar] [CrossRef] [Green Version]
  21. Chalkley, M.J.; Del Castillo, T.J.; Matson, B.D.; Roddy, J.P.; Peters, J.C. Catalytic N2-to-NH3 Conversion by Fe at Lower Driving Force: A Proposed Role for Metallocene-Mediated PCET. ACS Cent. Sci. 2017, 3, 217–223. [Google Scholar] [CrossRef]
  22. Buscagan, T.M.; Oyala, P.H.; Peters, J.C. N2-to-NH3 Conversion by a Triphos-Iron Catalyst and Enhanced Turnover under Photolysis. Angew. Chem. Int. Ed. 2017, 56, 6921–6926. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  23. Del Castillo, T.J.; Thompson, N.B.; Suess, D.L.M.; Ung, G.; Peters, J.C. Evaluating Molecular Cobalt Complexes for the Conversion of N2 to NH3. Inorg. Chem. 2015, 54, 9256–9262. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  24. Dorantes, M.J.; Moore, J.T.; Bill, E.; Mienert, B.; Lu, C.C. Bimetallic Iron–Tin Catalyst for N2 to NH3 and a Silyldiazenido Model Intermediate. Chem. Commun. 2020, 56, 11030–11033. [Google Scholar] [CrossRef] [PubMed]
  25. Fajardo, J., Jr.; Peters, J.C. Catalytic Nitrogen-to-Ammonia Conversion by Osmium and Ruthenium Complexes. J. Am. Chem. Soc. 2017, 139, 16105–16108. [Google Scholar] [CrossRef] [Green Version]
  26. Hill, P.J.; Doyle, L.R.; Crawford, A.D.; Myers, W.K.; Ashley, A.E. Selective Catalytic Reduction of N2 to N2H4 by a Simple Fe Complex. J. Am. Chem. Soc. 2016, 138, 13521–13524. [Google Scholar] [CrossRef] [Green Version]
  27. Shiina, K. Reductive Silylation of Molecular Nitrogen via Fixation to Tris(Trialkylsilyl)Amine. J. Am. Chem. Soc. 1972, 94, 9266–9267. [Google Scholar] [CrossRef]
  28. Ghana, P.; van Krüchten, F.D.; Spaniol, T.P.; van Leusen, J.; Kögerler, P.; Okuda, J. Conversion of Dinitrogen to Tris(Trimethylsilyl)Amine Catalyzed by Titanium Triamido-Amine Complexes. Chem. Commun. 2019, 55, 3231–3234. [Google Scholar] [CrossRef]
  29. Imayoshi, R.; Nakajima, K.; Nishibayashi, Y. Vanadium-Catalyzed Reduction of Molecular Dinitrogen into Silylamine under Ambient Reaction Conditions. Chem. Lett. 2017, 46, 466–468. [Google Scholar] [CrossRef]
  30. Kendall, A.J.; Johnson, S.I.; Bullock, R.M.; Mock, M.T. Catalytic Silylation of N2 and Synthesis of NH3 and N2H4 by Net Hydrogen Atom Transfer Reactions Using a Chromium P4 Macrocycle. J. Am. Chem. Soc. 2018, 140, 2528–2536. [Google Scholar] [CrossRef]
  31. Yin, J.; Li, J.; Wang, G.-X.; Yin, Z.-B.; Zhang, W.-X.; Xi, Z. Dinitrogen Functionalization Affording Chromium Hydrazido Complex. J. Am. Chem. Soc. 2019, 141, 4241–4247. [Google Scholar] [CrossRef]
  32. Komori, K.; Oshita, H.; Yasushi, M.; Hidai, M. Catalytic Conversion of Molecular Nitrogen into Silylamines Using Molybdenum and Tungsten Dinitrogen Complexes. J. Am. Chem. Soc. 1989, 111, 1939–1940. [Google Scholar] [CrossRef]
  33. Tanaka, H.; Sasada, A.; Kouno, T.; Yuki, M.; Miyake, Y.; Nakanishi, H.; Nishibayashi, Y.; Yoshizawa, K. Molybdenum-Catalyzed Transformation of Molecular Dinitrogen into Silylamine: Experimental and DFT Study on the Remarkable Role of Ferrocenyldiphosphine Ligands. J. Am. Chem. Soc. 2011, 133, 3498–3506. [Google Scholar] [CrossRef]
  34. Imayoshi, R.; Tanaka, H.; Matsuo, Y.; Yuki, M.; Nakajima, K.; Yoshizawa, K.; Nishibayashi, Y. Cobalt-Catalyzed Transformation of Molecular Dinitrogen into Silylamine under Ambient Reaction Conditions. Chem.-Eur. J. 2015, 21, 8905–8909. [Google Scholar] [CrossRef]
  35. Eaton, M.C.; Knight, B.J.; Catalano, V.J.; Murray, L.J. Evaluating Metal Ion Identity on Catalytic Silylation of Dinitrogen Using a Series of Trimetallic Complexes. Eur. J. Inorg. Chem. 2020, 2020, 1519–1524. [Google Scholar] [CrossRef]
  36. Yuki, M.; Tanaka, H.; Sasaki, K.; Miyake, Y.; Yoshizawa, K.; Nishibayashi, Y. Iron-Catalysed Transformation of Molecular Dinitrogen into Silylamine under Ambient Conditions. Nat. Commun. 2012, 3, 1254. [Google Scholar] [CrossRef] [Green Version]
  37. Prokopchuk, D.E.; Wiedner, E.S.; Walter, E.D.; Popescu, C.V.; Piro, N.A.; Kassel, W.S.; Bullock, R.M.; Mock, M.T. Catalytic N2 Reduction to Silylamines and Thermodynamics of N2 Binding at Square Planar Fe. J. Am. Chem. Soc. 2017, 139, 9291–9301. [Google Scholar] [CrossRef]
  38. Araake, R.; Sakadani, K.; Tada, M.; Sakai, Y.; Ohki, Y. [Fe4] and [Fe6] Hydride Clusters Supported by Phosphines: Synthesis, Characterization, and Application in N2 Reduction. J. Am. Chem. Soc. 2017, 139, 5596–5606. [Google Scholar] [CrossRef]
  39. Ohki, Y.; Araki, Y.; Tada, M.; Sakai, Y. Synthesis and Characterization of Bioinspired [Mo2Fe2]–Hydride Cluster Complexes and Their Application in the Catalytic Silylation of N2. Chem.-Eur. J. 2017, 23, 13240–13248. [Google Scholar] [CrossRef]
  40. Arata, S.; Sunada, Y. An Isolable Iron(ii) Bis(Supersilyl) Complex as an Effective Catalyst for Reduction Reactions. Dalton Trans. 2019, 48, 2891–2895. [Google Scholar] [CrossRef]
  41. Siedschlag, R.B.; Bernales, V.; Vogiatzis, K.D.; Planas, N.; Clouston, L.J.; Bill, E.; Gagliardi, L.; Lu, C.C. Catalytic Silylation of Dinitrogen with a Dicobalt Complex. J. Am. Chem. Soc. 2015, 137, 4638–4641. [Google Scholar] [CrossRef]
  42. Suzuki, T.; Fujimoto, K.; Takemoto, Y.; Wasada-Tsutsui, Y.; Ozawa, T.; Inomata, T.; Fryzuk, M.D.; Masuda, H. Efficient Catalytic Conversion of Dinitrogen to N(SiMe3)3 Using a Homogeneous Mononuclear Cobalt Complex. ACS Catal. 2018, 8, 3011–3015. [Google Scholar] [CrossRef]
  43. Gao, Y.; Li, G.; Deng, L. Bis(Dinitrogen)Cobalt(−1) Complexes with NHC Ligation: Synthesis, Characterization, and Their Dinitrogen Functionalization Reactions Affording Side-on Bound Diazene Complexes. J. Am. Chem. Soc. 2018, 140, 2239–2250. [Google Scholar] [CrossRef] [PubMed]
  44. Arnold, P.L.; Ochiai, T.; Lam, F.Y.T.; Kelly, R.P.; Seymour, M.L.; Maron, L. Metallacyclic Actinide Catalysts for Dinitrogen Conversion to Ammonia and Secondary Amines. Nat. Chem. 2020, 12, 654–659. [Google Scholar] [CrossRef] [PubMed]
  45. Bennaamane, S.; Espada, M.F.; Mulas, A.; Personeni, T.; Saffon-Merceron, N.; Fustier-Boutignon, M.; Bucher, C.; Mézailles, N. Catalytic Reduction of N2 to Borylamine at a Molybdenum Complex. Angew. Chem. Int. Ed. 2021, 60, 20210–20214. [Google Scholar] [CrossRef]
  46. Sekiguchi, Y.; Arashiba, K.; Tanaka, H.; Eizawa, A.; Nakajima, K.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Reduction of Molecular Dinitrogen to Ammonia and Hydrazine Using Vanadium Complexes. Angew. Chem. Int. Ed. 2018, 57, 9064–9068. [Google Scholar] [CrossRef]
  47. Kuriyama, S.; Arashiba, K.; Nakajima, K.; Matsuo, Y.; Tanaka, H.; Ishii, K.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Transformation of Dinitrogen into Ammonia and Hydrazine by Iron-Dinitrogen Complexes Bearing Pincer Ligand. Nat. Commun. 2016, 7, 12181. [Google Scholar] [CrossRef]
  48. Kuriyama, S.; Arashiba, K.; Tanaka, H.; Matsuo, Y.; Nakajima, K.; Yoshizawa, K.; Nishibayashi, Y. Direct Transformation of Molecular Dinitrogen into Ammonia Catalyzed by Cobalt Dinitrogen Complexes Bearing Anionic PNP Pincer Ligands. Angew. Chem. Int. Ed. 2016, 55, 14291–14295. [Google Scholar] [CrossRef]
  49. Grüger, N.; Wadepohl, H.; Gade, L.H. A Readily Accessible PNP Pincer Ligand with a Pyrrole Backbone and Its NiI/II Chemistry. Dalton Trans. 2012, 41, 14028. [Google Scholar] [CrossRef]
  50. Kumar, S.; Mani, G.; Mondal, S.; Chattaraj, P.K. Pyrrole-Based New Diphosphines: Pd and Ni Complexes Bearing the PNP Pincer Ligand. Inorg. Chem. 2012, 51, 12527–12539. [Google Scholar] [CrossRef]
  51. Venkanna, G.T.; Ramos, T.V.M.; Arman, H.D.; Tonzetich, Z.J. Nickel (II) Complexes Containing a Pyrrole–Diphosphine Pincer Ligand. Inorg. Chem. 2012, 51, 12789–12795. [Google Scholar] [CrossRef]
  52. Moulton, C.J.; Shaw, B.L. Transition Metal–Carbon Bonds. Part XLII. Complexes of Nickel, Palladium, Platinum, Rhodium and Iridium with the Tridentate Ligand 2,6-Bis[(Di-t-Butylphosphino)Methyl]Phenyl. J. Chem. Soc. Dalton Trans. 1976, 11, 1020–1024. [Google Scholar] [CrossRef]
  53. Kuriyama, S.; Kato, T.; Tanaka, H.; Konomi, A.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Reduction of Dinitrogen to Ammonia and Hydrazine Using Iron–Dinitrogen Complexes Bearing Anionic Benzene-Based PCP-Type Pincer Ligands. Bull. Chem. Soc. Jpn. 2022, 95. [Google Scholar] [CrossRef]
  54. Kawakami, R.; Kuriyama, S.; Tanaka, H.; Arashiba, K.; Konomi, A.; Nakajima, K.; Yoshizawa, K.; Nishibayashi, Y. Catalytic Reduction of Dinitrogen to Tris(Trimethylsilyl)Amine Using Rhodium Complexes with a Pyrrole-Based PNP-Type Pincer Ligand. Chem. Commun. 2019, 55, 14886–14889. [Google Scholar] [CrossRef]
  55. Kawakami, R.; Kuriyama, S.; Tanaka, H.; Konomi, A.; Yoshizawa, K.; Nishibayashi, Y. Iridium-Catalyzed Formation of Silylamine from Dinitrogen under Ambient Reaction Conditions. Chem. Lett. 2020, 49, 794–797. [Google Scholar] [CrossRef]
  56. Narro, A.L.; Arman, H.D.; Tonzetich, Z.J. Manganese Chemistry of Anionic Pyrrole-Based Pincer Ligands. Organometallics 2019, 38, 1741–1749. [Google Scholar] [CrossRef]
  57. Sarbajna, A.; He, Y.-T.; Dinh, M.H.; Gladkovskaya, O.; Rahaman, S.M.W.; Karimata, A.; Khaskin, E.; Lapointe, S.; Fayzullin, R.R.; Khusnutdinova, J.R. Aryl–X Bond-Forming Reductive Elimination from High-Valent Mn–Aryl Complexes. Organometallics 2019, 38, 4409–4419. [Google Scholar] [CrossRef]
  58. Morris, R.J.; Girolami, G.S. High-Valent Organomanganese Chemistry. 2. Synthesis and Characterization of Manganese(III) Aryls. Organometallics 1991, 10, 799–804. [Google Scholar] [CrossRef]
  59. Dey, K.; De, R.L. Organometallic Derivatives of Cobalt(III), Chromium(III) and Manganese(III) Complexes of Schiff Bases. J. Inorg. Nucl. Chem. 1977, 39, 153–155. [Google Scholar] [CrossRef]
  60. Kreye, M.; Freytag, M.; Jones, P.G.; Williard, P.G.; Bernskoetter, W.H.; Walter, M.D. Homolytic H2 Cleavage by a Mercury-Bridged Ni(i) Pincer Complex [{(PNP)Ni}2{μ-Hg}]. Chem. Commun. 2015, 51, 2946–2949. [Google Scholar] [CrossRef] [Green Version]
  61. Venkanna, G.T.; Arman, H.D.; Tonzetich, Z.J. Catalytic C–S Cross-Coupling Reactions Employing Ni Complexes of Pyrrole-Based Pincer Ligands. ACS Catal. 2014, 4, 2941–2950. [Google Scholar] [CrossRef]
  62. Levine, D.S.; Tilley, T.D.; Andersen, R.A. C–H Bond Activations by Monoanionic, PNP-Supported Scandium Dialkyl Complexes. Organometallics 2015, 34, 4647–4655. [Google Scholar] [CrossRef]
  63. Fowles, G.W.A.; Rice, D.A.; Walton, R.A. The Donor Properties of Simple Ethers—II[1]: Complexes of Manganese(II), Iron(II), Cobalt(II) and Nickel(II) Halides with Tetrahydrofuran and 1,2-Dimethoxyethane. J. Inorg. Nucl. Chem. 1969, 31, 3119–3131. [Google Scholar] [CrossRef]
  64. Murray, B.D.; Power, P.P. Monomeric Manganese(II) Alkoxides: Syntheses and x-Ray Crystal Structures of Novel Three- and Four-Coordinate Manganese Complexes of the Tri-Tert-Butylmethoxide Ligand. J. Am. Chem. Soc. 1984, 106, 7011–7015. [Google Scholar] [CrossRef]
  65. Bradley, D.C.; Hursthouse, M.B.; Ibrahim, A.A.; Malik, K.M.A.; Motevalli, M.; Möseler, R.; Powell, H.; Runnacles, J.D.; Sullivan, A.C. Synthesis and Chemistry of the Bis(Trimethylsilyl)Amido Bis-Tetrahydrofuranates of the Group 2 Metals Magnesium, Calcium, Strontium and Barium. X-ray Crystal Structures of Mg[N(SiMe3)2]2·2THF and Related Mn[N(SiMe3)2]2·2THF. Polyhedron 1990, 9, 2959–2964. [Google Scholar] [CrossRef]
  66. Brookhart, M.; Grant, B.; Volpe, A.F. [(3,5-(CF3)2C6H3)4B]-[H(OEt2)2]+: A Convenient Reagent for Generation and Stabilization of Cationic, Highly Electrophilic Organometallic Complexes. Organometallics 1992, 11, 3920–3922. [Google Scholar] [CrossRef]
  67. Weitz, I.S.; Rabinovitz, M. The Application of C8K for Organic Synthesis: Reduction of Substituted Naphthalenes. J. Chem. Soc. Perkin 1 1993, 1, 117–120. [Google Scholar] [CrossRef]
  68. Weatherburn, M.W. Phenol-Hypochlorite Reaction for Determination of Ammonia. Anal. Chem. 1967, 39, 971–974. [Google Scholar] [CrossRef]
  69. Watt, G.W.; Chrisp, J.D. Spectrophotometric Method for Determination of Hydrazine. Anal. Chem. 1952, 24, 2006–2008. [Google Scholar] [CrossRef]
  70. Higashi, T. ABSCOR: Program for Absorption Correction; Rigaku Corporation: Tokyo, Japan, 1995. [Google Scholar]
  71. CrystalStructure, version 4.3; Crystal Structure Analysis Package; Rigaku Corporation: Tokyo, Japan, 2000–2018.
  72. Sheldrick, G.M. SHELXT: Integrating space group determination and structure solution. Acta Crystallogr. Sect. A Found. Adv. 2014, 70, C1437. [Google Scholar] [CrossRef]
  73. Sheldrick, G.M. A short history of SHELX. Acta Crystallogr. Sect. A Found. Crystallogr. 2008, 64, 112–122. [Google Scholar] [CrossRef] [Green Version]
  74. Sheldrick, G.M. Crystal structure refinement with SHELXL. Acta Crystallogr. Sect. C Struct. Chem. 2015, 71, 3–8. [Google Scholar] [CrossRef]
Scheme 1. Synthesis of 1.
Scheme 1. Synthesis of 1.
Molecules 27 02373 sch001
Figure 1. ORTEP drawings of 1 (left), 2 (middle), and 3 (right). Thermal ellipsoids are shown at the 50% probability level. Hydrogen atoms are omitted for clarity.
Figure 1. ORTEP drawings of 1 (left), 2 (middle), and 3 (right). Thermal ellipsoids are shown at the 50% probability level. Hydrogen atoms are omitted for clarity.
Molecules 27 02373 g001
Scheme 2. Reduction of 1.
Scheme 2. Reduction of 1.
Molecules 27 02373 sch002
Scheme 3. Synthesis of 2.
Scheme 3. Synthesis of 2.
Molecules 27 02373 sch003
Scheme 4. Synthesis of 3.
Scheme 4. Synthesis of 3.
Molecules 27 02373 sch004
Table 1. Selected Bond Lengths (Å) and Angles (deg) for 1.
Table 1. Selected Bond Lengths (Å) and Angles (deg) for 1.
Mn(1)–P(1) 2.7189(8)Mn(1)–P(2)2.7275(7)
Mn(1)–N(1)2.127(2)Mn(1)–N(2)2.188(2)
Mn(1)–Cl(1)2.3716(10)
P(1)–Mn(1)–P(2)147.46(3)N(1)–Mn(1)–N(2)107.34(8)
N(1)–Mn(1)–Cl(1)152.86(6)
Table 2. Selected Bond Lengths (Å) and Angles (deg) for 2.
Table 2. Selected Bond Lengths (Å) and Angles (deg) for 2.
Mn(1)–P(1) 2.7618(8)Mn(1)–P(2)2.7539(7)
Mn(1)–N(1)2.0549(18)Mn(1)–N(2)2.0215(19)
P(1)–Mn(1)–P(2)132.94(2)N(1)–Mn(1)–N(2)139.15(6)
Table 3. Selected Bond Lengths (Å) and Angles (deg) for 3.
Table 3. Selected Bond Lengths (Å) and Angles (deg) for 3.
Mn(1)–P(1) 2.4792(17)Mn(1)–P(2)2.4865(17)
Mn(1)–Br(1)2.5208(9)Mn(1)–Br(2)2.4513(9)
Mn(1)–C(1)2.071(5)
P(1)–Mn(1)–P(2)144.70(6)C(1)–Mn(1)–Br(1)95.46(14)
C(1)–Mn(1)–Br2(1)163.25(14)
Table 4. Attempted catalytic reduction of dinitrogen into ammonia or hydrazine using 13 at −78 °C a.
Table 4. Attempted catalytic reduction of dinitrogen into ammonia or hydrazine using 13 at −78 °C a.
Molecules 27 02373 i001
Entrycat.NH3
(Equiv) b
NH2NH2
(Equiv) b
H2
(Equiv) b
11007.8
221.407.5
33007.0
a A mixture of cat. (1 equiv), KC8 (40 equiv) and [H(OEt2)2][BArF4] (38 equiv) was stirred in Et2O at −78 °C for 1 h under 1 atm of dinitrogen and then at room temperature for 20 min. b Based on the manganese atom in the catalyst.
Table 5. Attempted catalytic reduction of dinitrogen into silylamine using 13 at rt a.
Table 5. Attempted catalytic reduction of dinitrogen into silylamine using 13 at rt a.
Molecules 27 02373 i002
Entrycat.ReductantNH3
(Equiv) b
11Na0.4
21KC81.5
32Na0.8
42KC81.4
53Na2.5
63KC82.2
a A mixture of cat. (1 equiv), KC8 (600 equiv), and Me3SiCl (600 equiv) was stirred in THF at room temperature for 20 h under 1 atm of dinitrogen. Silylamine was quantified as ammonia after acid hydrolysis of the reaction mixture. b Based on the manganese atom in the catalyst.
Table 6. X-ray crystallographic data for 13.
Table 6. X-ray crystallographic data for 13.
Compound123
chemical formulaC27H47ClMnN2P2C28H60MnN2P2Si2C24H43Br2MnP2
CCDC number214981221498102149811
formula weight552.02597.85608.30
dimensions of crystals, mm30.500 × 0.300 × 0.200 0.300 × 0.300 × 0.3000.150 × 0.050 × 0.050
crystal color, habitorange, blockcolorless, chunkred, block
crystal systemorthorhombicmonoclinicorthorhombic
space groupPna21 (#33)P21/n (#14)Pna21 (#33)
a, Å19.9909(11)10.6261(3)12.2701(4)
b, Å19.141(2)24.7389(7)15.6675(5)
c, Å7.849(3)14.0062(4)14.2993(4)
α, deg909090
β, deg90107.034(8)90
γ, deg909090
V, Å33003.4(10)3520.4(2)2748.92(15)
Z444
ρcalcd, g·cm−31.2211.1281.470
F(000)1180.001300.001248.00
μ, cm−16.5195.51835.217
trans. factors range0.647–0.8780.728–0.8470.528–0.839
no. reflections measured280903369125377
no. unique reflections686780555991
no. parameters refined0.03980.04570.0835
R1 (I > 2σ(I)) a0.03220.03960.0386
wR2 (all data) b0.06450.08630.0652
GOF c1.0421.0050.975
flack parameter0.000 0.000
max diff peak/hole, e Å−30.30/−0.160.47/−0.340.73/−0.35
a R1 = Σ||Fo|−|Fc||/Σ|Fo|. b wR2 = [Σw(Fo2Fc2)2w(Fo2)2]1/2, w = 1/[σ2(Fo2) + (qP)2 + rP], P = (Max(Fo2, 0) + 2Fc2)/3 [q = 0.0265 (1), 0 (2), 0.0235 (3); r = 0.6590 (1), 3.8000 (2), 0 (3)]. c GOF = [Σw(Fo2Fc2)2/(NoNparams)]1/2.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Kuriyama, S.; Wei, S.; Kato, T.; Nishibayashi, Y. Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation. Molecules 2022, 27, 2373. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072373

AMA Style

Kuriyama S, Wei S, Kato T, Nishibayashi Y. Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation. Molecules. 2022; 27(7):2373. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072373

Chicago/Turabian Style

Kuriyama, Shogo, Shenglan Wei, Takeru Kato, and Yoshiaki Nishibayashi. 2022. "Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation" Molecules 27, no. 7: 2373. https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072373

Article Metrics

Back to TopTop