1. Introduction
The adhesion of circulating leukocytes in the blood to endothelium at the sites of inflammation is critical for their subsequent extravasation through the blood vessel wall into the sites of inflammation. The major interaction in the initial recognition is rolling adhesion, which is the primary interaction of leukocytes with vascular endothelial cells under shear flow. Rolling adhesion requires specialized adhesion receptors on the surface of leukocytes. Rolling has been attributed to members of the selectin family proteins [
1], but it is also mediated by CD44, a cell surface glycoprotein expressed in various cell types, including lymphoid cells [
2]. CD44 is a transmembrane adhesion receptor that has been associated with various biological processes, including leukocyte trafficking and tumor metastasis [
3]. By changing its binding ability to the ligand hyaluronan, its adhesive function could be tightly regulated [
4–
7].
Leukocytes display pointed projections of the plasma membrane, microvilli, on their cell surface, and these structures may facilitate tethering and rolling of leukocytes along the vascular endothelium under flow [
8]. Optical microscopy (light microscopy) has been the most widely used method to observe the distribution of receptor molecules at the cell surface by labeling with fluorescence dye. However, conventional optical microscopy is not suitable to observe the ultrastructure, including that of microvilli, due to diffraction-limited resolution. Super-resolution techniques surpass the limits of optical diffraction in light microscopy, and the objects that are less than 100 nm apart can be resolved by these techniques [
9–
11]. However, the resolution is still insufficient for the observation of fine subcellular surface structures and the distribution of membrane receptors at the cell surface, which requires high spatial resolution of around 10 nm. Leukocyte microvilli have been observed by transmission electron microscopy and scanning electron microscopy (SEM) [
12–
16] under vacuum after dehydration processes. These observations revealed that the localization of adhesion molecules such as L-selectin to microvilli results in concentration of the receptor, making it accessible to their ligands on endothelial cells [
13–
16]. However, these conventional electron microscopy techniques are not compatible with wet specimens and require elaborate specimen preparation processes, including dehydration, which may affect delicate subcellular structures.
Several methods have been developed for the observation of wet samples including biological specimens and cells with high resolution, using electron beams. Electron microscopy using environmental capsule [
17] enables the direct observation of wet specimens but with small sample volumes [
18–
21]. Electron beam excitation assisted optical microscopy (EXAM) enables the observation of wet samples [
22]. Recently, atmospheric scanning electron microscopy (ASEM) was developed for direct observation of wet specimens in an open dish, which facilitates cell culture and various kinds of labeling [
23]. ASEM was applied for the observation of dynamic phenomena of inorganic materials and electrochemical reactions in liquid [
24]. ASEM can be used to observe biological specimens such as mammalian cells [
25,
26], small bacteria [
27], and protein crystals [
28] in an atmospheric environment without dehydration. The introduction of ASEM in cell biology has revolutionized the observation of samples by enabling direct SEM examination in aqueous environment [
25,
26]. ASEM also enables correlative observation with light microscopy and electron microscopy [
23,
25]. Correlative light and electron microscopy (CLEM) has become increasingly important in the analysis of cellular structure and function [
29,
30].
In the present study, we report the correlative microscopic observation of lymphocytes in water using nanometer-sized gold particles (Nanogold) by ASEM with immuno-fluorescence optical microscopy and immuno-electron microscopy for analysis of surface distribution of CD44, and also report the ultrastructural analysis of cell surface microvilli by using positively charged Nanogold. We also estimated the functional relevance of microvilli to CD44-dependent cell adhesive properties under shear flow.
3. Experimental Section
3.1. Reagents
Rat anti-mouse CD44 monoclonal antibody IM7.8.1 was purchased from BioLegend (San Diego, CA, USA). Fab’ fragment of Nanogold (1.4 nm)- and Alexa Fluor 488-conjugated goat anti-rat IgG (FluorNanogold) and GoldEnhance-EM were purchased from Nanoprobes, Inc. (Yaphank, NY, USA). Cytochalasin D was purchased from Sigma-Aldrich (St. Louis, MO, USA).
3.2. Cell Culture
The mouse T lymphocyte cell line BW5147, obtained from American Tissue Culture Collection (ATCC, Manassas, VA, USA), was maintained in RPMI 1640 medium (Sigma-Aldrich) supplemented with 10% fetal calf serum, 100 units/mL penicillin, and 100 μg/mL streptomycin, and incubated at 37 °C in an atmosphere containing 5% CO2.
3.3. Cell Staining
Immunolabeling with gold conjugates and imaging with ASEM were performed as described previously [
25]. In brief, cells were cultured on an SiN film of 100 nm in thickness, in RPMI supplemented with 10% fetal calf serum, in a 5% CO
2 atmosphere at 37 °C. The cells were untreated or treated with 10 μM cytochalasin D for 1 h and fixed with 4% paraformaldehyde in phosphate-buffered saline (PBS) at room temperature for 10 min. For detecting CD44 on the cell surface, the cells were incubated with 1% skim milk/PBS for 30 min, with IM7.8.1 antibody for 1 h, and then with Fab’ fragment of Nanogold- and Alexa Fluor 488-conjugated goat anti-rat IgG for 30 min. After fixation with 1% glutaraldehyde for 15 min at room temperature, the Nanogold signal was enhanced using GoldEnhance-EM at room temperature for 5 min.
For positively charged Nanogold labeling, glutaraldehyde-fixed cells were incubated with 3 μM positively charged Nanogold solution (Nanoprobes) for 20 min at room temperature. After washing with double distilled water (DDW), the size of the gold particles was increased by gold enhancement using GoldEnhance-EM #2133 (Nanoprobes). Protocol #2113 was employed, but steps #3 and #4 (addition of 50 mM glycine in PBS to inactivate residual paraformaldehyde) were omitted, and the development time was 10 min, followed by washing with DDW.
3.4. ASEM
The configuration of the ClairScope, JASM-6200 (JEOL Ltd., Tokyo, Japan) is illustrated in
Figure 1. The electron beam of the inverted SEM is projected from underneath (in a vacuum) through the SiN film of the ASEM dish onto the specimen stage, which is at atmospheric pressure. Except for this SiN window, the ASEM dish is the same (material and size) as the polystyrene Petri dishes used for cell culture. It holds approximately 3 mL of medium and can be removed from the microscope and used for the prolonged culture of various types of cells in a CO
2 incubator. Thus, specimens can later be imaged
in situ by SEM, with the backscattered electrons being captured by a backscattered electron imaging (BEI) detector (
Figure 1C). Fluorescence images can be captured with a Neo sCMOS camera with 2544 × 2160 pixels (Andor Technology, Belfast, UK).
The inverted SEM of the ClairScope was operated at 30 kV for immuno-labeling and 20 kV for positively charged gold labeling. All specimens were imaged in 10 mg/mL dextrose in DDW. Cells were fixed and stained in situ beforehand as required.
3.5. Flow Cytometry
To measure hyaluronan binding, cells were incubated on ice with or without 2 μg/mL FITC-conjugated hyaluronan (PG Research, Tokyo, Japan) for 1 h. Samples were analyzed using a FACS Calibur (BD Biosciences, San Jose, CA, USA) with FlowJo software (Tree Star, Ashland, OR, USA).
3.6. Shear Flow Assay
The shear flow assay was performed based on the method as previously described [
26]. BW5147 T lymphocytes that had been subjected to cytochalasin D treatment or were left untreated, were rinsed and resuspended in prewarmed RPMI 1640 medium at 1 × 10
6 cells/mL. The cell suspension was then transfused through a capillary tube (Drummond Scientific, Broomall, PA, USA), the inner surface of which had been coated with 0.1 mg/mL NeutrAvidin (Molecular Probes, Eugene, OR, USA) and subsequently with 25 μg/mL biotin-conjugated hyaluronan (Hyalose, Oklahoma, OK, USA), at a wall shear stress of 1.2 dyn/cm
2 using a syringe pump (Harvard Apparatus, South Natick, MA, USA). The rolling cells were observed under an inverted phase-contrast microscope with a 10× objective, and analyzed using ImageJ software (NIH, Bethesda, MD, USA).