Stereoselective Synthesis and Investigation of Isopulegol-Based Chiral Ligands

Abstract

A library of isopulegol-based bi-, tri- and tetrafunctional chiral ligands has been developed from commercially available (−)-isopulegol and applied as chiral catalysts in the addition of diethylzinc to benzaldehyde. Michael addition of primary amines towards α-methylene-γ-butyrolactone, followed by reduction, was accomplished to provide aminodiols in highly stereoselective transformations. Stereoselective epoxidation of (+)-neoisopulegol, derived from natural (−)-isopulegol, and subsequent oxirane ring opening with primary amines afforded aminodiols. The regioselective ring closure of N-substituted aminodiols with formaldehyde was also investigated. Hydroxylation of (+)-neoisopulegol resulted in diol, which was then transformed into aminotriols by aminolysis of its epoxides. Dihydroxylation of (+)-neoisopulegol or derivatives with OsO₄/NMO gave neoisopulegol-based di-, tri- and tetraols in highly stereoselective reactions. The antimicrobial activity of aminodiol and aminotriol derivatives as well as di-, tri- and tetraols was also explored. In addition, structure–activity relationships were examined by assessing substituent effects on the aminodiol and aminotriol systems.

1. Introduction

In recent years, the discovery of aminodiols and their applications as building moieties of complex bioactive molecules have attracted significant attention due to their biological activities. The aminodiol moieties possess a cardiovascular, cytostatic, and antiviral effect [1]. For example, aristeromycin, first isolated from Streptomyces citricolor, and its modified derivatives belong to an important group of carbocyclic nucleosides that exhibit a wide range of pharmacological properties such as antiviral, anticancer and antitoxoplasma activities. Aristeromycin analogues, in particular, are widely used as antiviral agents against a range of viruses, including the human immunodeficiency, hepatitis B, herpes simplex, varicella-zoster, influenza and hepatitis C viruses [2,3,4]. (2R,3R,7Z)-2-Aminotetradec-7-ene-1,3-diol, a new sphingosine derivative of the Caribbean sponge Haliclona vansoesti, is a potent antimicrobial metabolite [5]. The Abbott aminodiol, found to be a useful building block for the synthesis of the potent renin inhibitor Zankiren^®, and Enalkiren^®, was introduced into the therapy of hypertension [6,7]. Aminodiols can also exert antidepressive activity. For example, (S,S)-reboxetine, a selective norepinephrine reuptake inhibitor, was approved in many countries for the treatment of unipolar depression [8], while some aminodiols have been investigated as selective antagonists on receptor P2X₁ [9]. Other aminodiols may serve as starting materials for the synthesis of biologically active natural compounds. For example, cytoxazone, a microbial metabolite isolated from Streptomyces species, is a selective modulator of the secretion of T_H2 cytokine [10,11]. Some bicyclic aminodiol-based carbocyclic nucleoside analogues exert antiviral activity [12].

Besides their biological interest, aminodiols have also been applied as starting materials in asymmetric syntheses or as chiral auxiliaries and ligands in enantioselective transformations [13]. To develop new, efficient and commercially available chiral catalysts, chiral natural products including (+)- and (−)-α-pinene [14,15], (+)-carene [16,17], (-)-menthone [18], (−)-fenchone [19], (+)-sabinol [20], (−)-nopinone [21] or (−)-pulegone [22] can serve as important starting materials for the synthesis of aminodiols. Monoterpene-based aminodiols have been demonstrated to be excellent chiral auxiliaries in a wide range of stereoselective transformations including intramolecular radical cyclisation [23], intramolecular [2+2] photocycloaddition [24] and Grignard addition [25,26].

Monoterpene-based diols or triols have also proved to be good chiral auxiliaries and catalysts [27,28]. They also possess marked biological properties; e.g., antimicrobial, antifungal or enzyme inhibitor activities [29,30,31].

In the present contribution, we report the preparation of a new library of isopulegol-based chiral bi-, tri- and tetrafunctional synthons, such as aminodiols, aminotriols, di-, tri- and tetraols, starting from commercially available natural (−)-isopulegol. Our study also involved the evaluation of the resulting ligands as catalysts in the asymmetric transformation and antimicrobial activity on multiple bacterial and fungal strains of new isopulegol derivatives.

2. Results

2.1. Synthesis of (−)-α-methylene-γ-butyrolactone 4

The key intermediate (−)-α-methylene-γ-butyrolactone 4 was prepared from commercially available (−)-isopulegol 1 by oxidizing its hydroxy group, followed by stereoselective reduction of the resulting carbonyl group providing (+)-neoisopulegol 2. Regioselective allylic hydroxylation of 2 gave diol 3, which was transformed to 4 by oxidation and ring closure of the obtained γ-hydroxy-substituted α,β-unsaturated carboxylic acid applying literature methods [32,33,34,35,36,37] (Figure 1).

2.2. Synthesis of Isopulegol-based Aminodiols

Nucleophilic addition of primary amines to α-methylene-γ-butyrolactone 4 has proved to be an efficient method for the preparation of a highly diversified library of β-aminolactones 5–8 [38,39,40]. Treatment of β-aminolactones with LiAlH₄ resulted in secondary aminodiols 9–12 [16]. Secondary aminodiols 9–11 were transformed into primary diol 13 with debenzylation through hydrogenolysis over Pd/C. In order to study the regioselectivity of ring closure of the aminodiol function, we attempted to incorporate the hydroxy groups of aminodiols into products with 1,3-oxazine or 1,3-oxazepine ring [16,22,41]. When aminodiols 9–12 were reacted with HCHO under mild conditions, 1,3-oxazine 14–17 were obtained in highly regioselective ring closure (Scheme 1).

Dihydroxylation of 4 with OsO₄ and NMO (4-Methylmorpholine N-oxide) furnished 18 in an acceptable yield [16,22] (Scheme 1). The relative configuration of compound 18 was determined by means of NOESY (Nuclear Overhauser Effect SpecroscopY) experiments: clear NOE (Nuclear Overhauser Effect) signals were observed between the OH-7 and H-3 as well as OH-7 and H-4 protons (Figure 2).

Epoxidation of 2 with t-BuOOH in the presence of vanadyl acetylacetonate (VO(acac)₂) as catalyst furnished epoxide 19 in a stereospecific reaction [35,42,43,44]. Since our earlier results clearly demonstrated that substituents at nitrogen of aminodiols exerted definite influence on the efficiency of their catalytic activity, aminodiol library 20–23 was prepared by aminolysis of 19 with different primary amines and LiClO₄ as catalyst [17,41,45,46], whereas exposure of 19 to NaOH furnished 29 with retention of stereochemistry [47]. Debenzylation via hydrogenolysis of compounds 20–22 over Pd/C in MeOH resulted in primary aminodiol 24 in moderate yield. When aminodiols 20–23 were treated with HCHO at room temperature, oxazolidines 25–28 were obtained in highly regioselective ring closures, similarly to the regioisomeric oxazine analogues (Scheme 2).

The syn-selective dihydroxylation of compound 2 with OsO₄ in the presence of a stoichiometric amount of the co-oxidant NMO furnished product 29 as a single diastereomer in moderate yield (Scheme 2). The relative configuration of compound 29 was determined by means of NOESY experiments: clear NOE signals were observed between the H-9 and H-3, H-4 as well as H-8 and H-3, H-4 protons (Figure 3).

The structure of compound 29 was confirmed by its five-membered cyclic carbonate 30 synthesized from 29 by the reaction with triphosgene (Scheme 2) [48]. It is well known that this carbonation reaction maintains the stereochemical configuration of 29 [49,50]. The stereochemical structure of carbonate 30 was identified by NOESY analyses: characteristic NOE signals were observed between the protons H-8 and H-3, H-4 together with the protons H-10 and H-3, H-4 (Figure 3).

Reduction of 30 with LAH (Lithium aluminum hydride) proceeded smoothly giving 29 in an excellent yield (Scheme 2). It has been reported that reduction of the cyclic carbonate moiety of 30 with LAH gave the corresponding diol with the same stereochemical configuration at the carbon atoms as of the original 29 moiety [51,52,53].

2.3. Synthesis of Isopulegol-based Aminotriols

Stereospecific epoxidation of allylic diol 3 with t-BuOOH and VO(acac)₂ was successfully applied to prepare epoxy diol 31 [35,43,44] (Scheme 3). The relative configuration of epoxide 31 was determined by means of NOESY experiments. Significant NOE signals were shown between the H-8 and H-3, H-4 as well as the H-3 and H-9 protons (Figure 4).

The oxirane ring of 31 was opened with primary amines and LiClO₄ as catalyst to give aminotriol library 32–35 [45,46]. Primary aminotriol 36 was obtained by debenzylation of the corresponding aminotriols 32–34 under standard condition by hydrogenation in the presence of a Pd/C catalyst. The synthesis of tetraol 37 was effectively performed by selective dihydroxylation of compound 3 with the OsO₄/NMO system [16,22] (Scheme 3).

2.4. Application of Aminodiol Derivatives and Aminotriols as Chiral Ligands for Catalytic Addition of Diethylzinc to Benzaldehyde

Aminodiol derivatives 9–17 and 20–28 together with aminotriols 32–36 were applied as chiral catalysts in the enantioselective addition of diethylzinc to benzaldehyde 38 to form (S)- and (R)-1-phenyl-1-propanol 39 (Scheme 4).

The enantiomeric purity of 1-phenyl-1-propanols (S)-39 and (R)-39 was determined by GC on a CHIRASIL-DEX CB column using literature methods [14,54]. Low to moderate enantioselectives were observed. The results obtained (see

Table 1. Addition of diethylzinc to benzaldehyde, catalyzed by aminodiol derivatives and aminotriols.

Entry	Ligand	Yield a (%)	eeb (%)	Configuration c
1	9	90	18	(R)
2	10	92	60	(R)
3	11	95	43	(R)
4	12	95	17	(R)
5	22	97	18	(R)
6	25	93	37	(R)
7	32	86	19	(S)
8	34	87	28	(S)
9	35	80	16	(S)

^a After silica column chromatography. ^b Determined using the crude product by GC (Chirasil-DEX CB column). ^c Determined by comparing the t_R of GC analysis and optical rotations with literature data [14,54].

) clearly show that all aminodiol derivatives favoured the formation of the (R)-enantiomer, whereas aminotriols led to the corresponding (S)-enantiomer. Aminodiol 10 afforded the best ee value (ee = 60%) with an (R)-selectivity, while aminotriol 34 showed the best ee value (ee = 28%) with an (S)-selectivity. Other compounds were also examined but their selectivities were less than 10% when applied as chiral ligands.

2.5. Antimicrobial Effects

Since several aminodiols [5], as well as polyols [29,30,31], exerted antimicrobial activities on various bacterial and fungal strains, antimicrobial activities of the prepared aminodiol analogues and polyols were also tested against two yeasts as well as two Gram-positive and two Gram-negative bacteria (

Table 2. Antimicrobial activities of the synthesized compounds.

				Inhibitory Effect (%) ± RSD (%)
		Yeast		Gram-negative		Gram-positive
Analogue	Conc. (µg/mL)	C. albicans	C. krusei	E. coli	P. aeruginosa	B. subtilis	S. aureus
9	10	−	38.2 ± 4.2	−	−	−	−
	100	−	41.8 ± 1.2	24.8 ± 1.3	−	−	−
10	10	−	−	21.1 ± 8.0	−	−	−
	100	−	−	25.8 ± 10.1	19.5 ± 0.5	−	−
11	10	0.2 ± 0.9	0.9 ± 0.5	−	22.6 ± 2.1	18.4 ± 0.7	8.5 ± 0.6
	100	2.2 ± 2.3	3.3 ± 4.7	0.2 ± 1.8	41.6 ± 12.2	21.0 ± 7.5	9.8 ± 4.0
12	10	−	−	−	5.4 ± 0.3	−	8.5 ± 6.3
	100	−	−	−	14.3 ± 4.5	−	9.4 ± 5.4
13	10	−	−	−	−	26.1 ± 8.3	24.5 ± 15.6
	100	−	40.4 ± 2.4	−	−	42.9 ± 20.0	25.2 ± 1.1
14	10	−	8.4 ± 4.1	−	3.2 ± 7.1	−	−
	100	−	6.7 ± 2.0	25.6 ± 2.1	4.4 ± 5.8	−	12.6 ± 4.5
15	10	−	1.9 ± 0.7	−	8.6 ± 2.5	−	3.6 ± 1.4
	100	−	2.8 ± 4.2	18.0 ± 1.8	20.1 ± 0.2	−	10.4 ± 1.5
16	10	−	−	−	4.4 ± 5.8	−	−
	100	−	48.9 ± 0.1	15.7 ± 1.7	8.4 ± 5.1	4.6 ± 12.5	−
17	10	−	−	−	15.2 ± 10.4	−	−
	100	−	33.1 ± 0.4	8.5 ± 2.06	16.7 ± 7.2	−	−
18	10	−	−	−	−	16.9 ± 17.7	34.4 ± 11.7
	100	−	−	−	−	27.1 ± 16.0	34.2 ± 2.6
20	10	−	−	−	2.0 ± 0.9	10.6 ± 6.4	−
	100	4.1 ± 1.6	−	35.4 ± 0.8	19.9 ± 4.8	11.5 ± 1.3	19.7 ± 7.2
24	10	−	34.6 ± 3.3	−	−	47.6 ± 10.6	30.0 ± 2.0
	100	23.6 ± 1.2	37.8 ± 3.6	−	−	55.1 ± 19.9	33.9 ± 4.0
29	10	−	−	−	−	−	32.4 ± 4.1
	100	−	−	−	−	21.2 ± 5.2	34.7 ± 6.6
32	10	−	−	−	−	−	−
	100	−	−	−	−	−	24.6 ± 11.9
	10	−	−	−	−	14.9 ± 13.8	31.2 ± 7.9
36	100		39.9 ± 4.1	−	−	43.1 ± 2.6	33.3 ± 2.1
37	10	−	−	−	−	−	31.6 ± 15.1
	100	−	26.8 ± 7.9	−	−	40.9 ± 16.6	32.8 ± 8.2

, only the outstanding results are shown). Compounds 10 and 20 inhibited over 20% against the applied Gram-negative bacteria, while other derivatives showed weak activities. Furthermore, 11 showed an inhibition activity over 40% for P. aeruginosa, while it had no effect against E. coli. All compounds presented low to moderate inhibitions against the Gram-positive bacteria in the range of 5%–55% and 9%–35% for B. subtilis and S. aureus, respectively. In the case of B. subtilis, 24 showed much more potential antimicrobial activity, while for S. aureus, 18 and 29 proved to be the most effective agents. In the yeast assays, only 24 exhibited moderate inhibition against C. albicans, whereas significant effects were observed against C. krusei almost in all cases reaching up to 50% with analogue 16.

Comparing the antimicrobial activities of the two families of aminodiols, our results suggest that both 3-aminomethyl-1,4-diols 9–13 and 4-amino-1,3-diols 20–24 have moderate antifungal activity against C. krusei and Gram-negative and Gram-positive bacteria. An interesting difference was observed between 1,3-oxazines and oxazolidines. Namely, oxazines 14–17 possess moderate antifungal and antibacterial activity, whereas oxazolidines 25–28 proved ineffective.

Polyols 29 and 37 have antibacterial effect only against the examined Gram-positive bacteria. From aminotriol library only primary aminotriol 36 has substantial antifungal and antibacterial effect. In contrast, N-substitution led to the loss of antimicrobial activity.

3. Discussion

Starting from the commercially available (−)-isopugeol, a new family of isopulegol-based chiral aminodiol and aminotriol libraries were prepared through chiral (+)-neoisopulegol as key intermediate via stereoselective transformations. Moreover, isopulegol-based chiral di-, tri- and tetraols, promising chiral substrates for the synthesis of chiral crown ethers were synthesized.

The resulting aminodiols exert moderate antimicrobial action on a panel of bacterial and fungal strains. The in vitro pharmacological studies have clearly shown that these primary aminodiols have significant microbiological effects. In addition, aminodiol and aminotriol derivatives were applied as chiral catalysts in the enantioselective addition of diethylzinc to benzaldehyde with moderate but significantly opposite stereoselectivity.

4. Materials and Methods

4.1. General Methods

Commercially available compounds were used as obtained from suppliers (Molar Chemicals Ltd, Halásztelek, Hungary; Merck Ltd., Budapest, Hungary and VWR International Ltd., Debrecen, Hungary), while applied solvents were dried according to standard procedures. Optical rotations were measured in MeOH at 20 °C with a Perkin-Elmer 341 polarimeter (PerkinElmer Inc., Shelton, CT, USA). Chromatographic separations and monitoring of reactions were carried out on Merck Kieselgel 60 (Merck Ltd., Budapest, Hungary). Elemental analyses for all prepared compounds were performed on a Perkin-Elmer 2400 Elemental Analyzer (PerkinElmer Inc., Waltham, MA, USA). GC measurements for direct separation of commercially available enantiomers of isopulegol to determine the enantiomeric purity of starting material 1 and separation of O-acetyl derivatives of enantiomers were performed on a Chirasil-DEX CB column (2500 × 0.25 mm I.D.) on a Perkin-Elmer Autosystem XL GC consisting of a Flame Ionization Detector (Perkin-Elmer Corporation, Norwalk, CT, USA) and a Turbochrom Workstation data system (Perkin-Elmer Corp., Norwalk, CT, USA). Melting points were determined on a Kofler apparatus (Nagema, Dresden, Germany) and are uncorrected. ¹H- and ¹³C-NMR were recorded on Brucker Avance DRX 500 spectrometer [500 MHz (¹H) and 125 MHz (¹³C), δ = 0 (TMS)]. Chemical shifts are expressed in ppm (δ) relative to TMS as the internal reference. J values are given by Hz. Supplementary material, all 1H/13C NMR spectra, in addition to NOESY, also 2D-HMBC and 2D-HMQC spectra are involved in Supporting Information file.

4.2. Starting Materials

(−)-Isopulegol 1 is available commercially from Merck Co with ee = 95%. (+)-Neoisopulegol 2, diol 3 and (−)-α-methylene-γ-butyrolactone 4 were prepared according to literature procedures, and all spectroscopic data were similar to those described therein [35]. The nucleophilic addition of α-methylene-γ-butyrolactone to amines were carried out according to our literature procedures with all spectroscopic data of compounds 5–7 being consistent with literature values [38].

(3S,3aS,6R,7aS)-3-((Isopropylamino)methyl)-6-methylhexahydrobenzofuran-2(3H)-one (8)

Yield: 70%, white crystals, m.p.: 192–195 °C. ${[\alpha ]}_D^{20}$ = +42.0 (c 0.22, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.91 (3H, d, J = 6.5 Hz), 0.95–1.01 (2H, m), 1.20–1.26 (1H, m), 1.47 (6H, d, J = 6.5 Hz), 1.53–1.54 (1H, m), 1.67–1.70 (1H, m), 1.82–1.92 (1H, m), 2.22 (1H, d, J = 15.0 Hz), 2.72–2.76 (1H, m), 3.12–3.16 (1H, m), 3.22–3.26 (1H, m), 3.41–3.47 (1H, m), 3.62 (1H, q, J = 6.4 Hz), 4.60 (1H, d, J = 2.0 Hz), 8.69 (1H, brs), 10.04 (1H, brs). ¹³C NMR (125 MHz, CDCl₃): δ = 18.9, 19.4, 21.9, 23.2, 26.1, 31.6, 35.7, 37.5, 40.5, 45.0, 51.5, 79.5, 177.1. Anal. Calcd for C₁₃H₂₃NO₂: C, 69.29; H, 10.29; N, 6.22. Found: C, 69.30; H, 10.27; N, 6.25.

4.3. General Procedure for Reduction with LiAlH₄

To a stirred suspension of LiAlH₄ (8 mmol) in dry ether (16 mL), a solution of compounds 5–8 (4 mmol) in dry ether (20 mL) was added at 0 °C. The reaction mixture was stirred for 4 h at room temperature, while the reaction progress was monitored by TLC. A mixture of H₂O (1.0 mL) and THF (10 mL) was then added dropwise with cooling. The inorganic material was filtered off and washed with Et₂O (for compounds 9–12) or EtOAc (for compound 29). The filtrate was dried (Na₂SO₄) and evaporated to dryness. The crude product was purified by column chromatography on silica gel using CHCl₃:MeOH = 9:1 (for compounds 9–12) or n-hexane:EtOAc = 1:4 (for compound 29).

4.3.1. (1S,2S,5R)-2-((S)-1-(Benzylamino)-3-hydroxypropan-2-yl)-5-methylcyclohexanol (9)

Yield: 98%, white crystals, m.p.: 101–103 °C. ${[\alpha ]}_D^{20}$ = +8.0 (c 0.29, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.86 (3H, d, J = 6.4 Hz), 0.88–0.94 (1H, m), 1.05–1.10 (1H, m), 1.32–1.36 (1H, m), 1.40–1.43 (1H, m), 1.53–1.58 (1H, m), 1.66–1.73 (2H, m), 1.78–1.87 (2H, m), 2.78 (1H, dd, J = 3.8, 12.1 Hz), 2.87 (1H, dd, J = 5.7, 12.2 Hz), 3.60 (1H, q, J = 7.7 Hz), 3.72–3.75 (1H, m), 3.77 (2H, s), 3.94 (1H, s), 7.25–7.34 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 25.2, 26.2, 35.4, 42.1, 42.3, 43.7, 49.1, 54.2, 64.6, 66.5, 127.5, 128.5, 128.7, 138.8. Anal. Calcd for C₁₇H₂₇NO₂: C, 73.61; H, 9.81; N, 5.05. Found: C, 73.65; H, 9.80; N, 5.10.

4.3.2. (1S,2S,5R)-2-((S)-1-Hydroxy-3-(((R)-1-phenylethyl)amino)propan-2-yl)-5-methylcyclohexanol (10)

Yield: 74%, colorless oil. ${[\alpha ]}_D^{20}$ = +33.0 (c 0.26, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.85 (3H, d, J = 6.5 Hz), 0.82–0.95 (1H, m), 1.05–1.10 (1H, m), 1.25–1.29 (1H, m), 1.39 (3H, d, J = 6.6 Hz), 1.42–1.48 (1H, m), 1.57–1.59 (1H, m), 1.68 (1H, d, J = 12.9 Hz), 1.78–1.87 (2H, m), 2.57 (1H, dd, J = 4.9, 12.1 Hz), 2.76 (1H, dd, J = 5.6, 12.1 Hz), 3.16 (2H, brs), 3.57 (1H, q, J = 7.4 Hz), 3.71–3.75 (2H, m), 3.96 (1H, s), 7.24–7.35 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 23.8, 25.1, 26.1, 35.3, 41.9, 42.4, 43.8, 48.3, 59.0, 65.3, 66.8, 126.8, 127.4, 128.7, 144.3. Anal. Calcd for C₁₈H₂₉NO₂: C, 74.18; H, 10.03; N, 4.81. Found: C, 74.20; H, 10.05; N, 4.85.

4.3.3. (1S,2S,5R)-2-((S)-1-Hydroxy-3-(((S)-1-phenylethyl)amino)propan-2-yl)-5-methylcyclohexanol (11)

Yield: 74%, white crystals, m.p.: 144–146 °C. ${[\alpha ]}_D^{20}$ = −16.0 (c 0.25, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.86 (3H, d, J = 6.3 Hz), 0.88–0.94 (1H, m), 1.06 (1H, t, J = 12.5 Hz), 1.30–1.34 (1H, m), 1.39 (3H, d, J = 6.6 Hz), 1.38–1.42 (1H, m), 1.56–1.64 (2H, m), 1.71–1.74 (1H, m), 1.75–1.90 (2H, m), 2.60 (1H, dd, J = 6.0, 12.2 Hz), 2.66 (1H, dd, J = 3.3 Hz, 12.2 Hz), 3.11 (2H, brs), 3.58 (1H, q, J = 3.0 Hz), 3.69–3.72 (2H, m), 3.86 (1H, s), 7.26–7.35 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 23.7, 25.4, 26.2, 35.4, 42.0, 42.2, 44.1, 47.0, 58.9, 64.5, 66.2, 126.8, 127.5, 128.7, 144.2. Anal. Calcd for C₁₈H₂₉NO₂: C, 74.18; H, 10.03; N, 4.81. Found: C, 74.15; H, 10.00; N, 4.79.

4.3.4. (1S,2S,5R)-2-((S)-1-Hydroxy-3-(isopropylamino)propan-2-yl)-5-methylcyclohexanol (12)

Yield: 99%, white crystals, m.p.: 155–160 °C. ${[\alpha ]}_D^{20}$ = +18.0 (c 0.275, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.85 (3H, d, J = 6.4 Hz), 0.85–0.95 (1H, m), 1.09 (1H, t, J = 12.8 Hz), 1.43 (6H, dd, J = 5.9, 11.6 Hz), 1.41–1.54 (3H, m), 1.72–1.79 (2H, m), 1.91 (1H, d, J = 13.3 Hz), 2.17 (1H, s), 3.25–3.30 (2H, m), 3.71 (1H, t, J = 9.9 Hz), 3.85–3.87 (1H, m), 4.06 (1H, s), 8.96 (1H, brs), 9.04 (1H, brs). ¹³C NMR (125 MHz, CDCl₃): δ = 19.1, 19.5, 22.3, 24.8, 25.9, 35.0, 41.0, 42.1, 42.2, 43.6, 51.3, 62.1, 65.6. Anal. Calcd for C₁₃H₂₇NO₂: C, 68.08; H, 11.87; N, 6.11. Found: C, 68.10; H, 11.90; N, 6.15.

4.4. General Procedure of Epoxidation

To a stirred pale red solution of 9 or 31 (5.87 mmol) and vanadyl acetylacetonate (10 mg) in dry toluene (30 mL) t-BuOOH (70% solution in H₂O, 11.8 mmol) dried briefly (Na₂CO₃) was added dropwise at 25 °C. The red colour of the solution darkened during the addition then faded to brownish yellow. Stirring was continued (12 h), whereupon KOH (9.8 mmol) in brine (25 mL) was added. The mixture was extracted with toluene (3 × 100 mL) and the organic layer was washed with brine before drying (Na₂SO₄) and evaporation. Compounds 10 and 32 were isolated after flash column chromatography (n-hexane:EtOAc = 4:1 for 10 and n-hexane:EtOAc = 1:1 for 32).

4.4.1. (1S,2R,5R)-5-Methyl-2-((S)-2-methyloxiran-2-yl)cyclohexanol (19)

Yield: 76%, white crystals, m.p.: 38–41 °C. ${[\alpha ]}_D^{20}$ = +69.0 (c 0.25, MeOH). All spectroscopic data of compound 19 was consistent with literature data [35,42].

4.4.2. (1S,2R,5R)-2-((R)-2-(Hydroxymethyl)oxiran-2-yl)-5-methylcyclohexanol (31)

Yield: 80%, colorless oil. ${[\alpha ]}_D^{20}$ = +36.0 (c 0.275, MeOH). ¹H NMR (500 MHz, CDCl₃): δ= 0.77 (3H, d, J = 6.3 Hz), 0.81–0.86 (1H, m), 1.00 (1H, t, J = 12.9 Hz), 1.26 (1H, d, J = 12.4 Hz), 1.43–1.46 (1H, m), 1.60–1.72 (4H, m), 2.67 (2H, dd, J = 4.5, 19.8 Hz), 3.18 (1H, d, J = 11.7 Hz), 3.81 (1H, d, J = 11.7 Hz), 4.04 (1H, s), 4.14 (1H, s), 4.62 (1H, brs). ¹³C NMR (125 MHz, CDCl₃): δ = 22.0, 22.1, 25.6, 34.4, 41.7, 45.5, 50.4, 61.6, 63.2, 68.0. Anal. Calcd for C₁₀H₁₈O₃: C, 64.49; H, 9.74. Found: C, 64.45; H, 9.70.

4.5. General Procedure for Ring-Opening of Epoxide with Primary Amines

To a solution of epoxide 10 or 32 (2.94 mmol) in MeCN (30 mL) was added a solution of the appropriate amine (5.88 mmol) in MeCN (10 mL) and LiClO₄ (2.94 mmol). The mixture was kept at reflux temperature for 4 hours. When the reaction completed (indicated by TLC), the mixture was evaporated to dryness, the residue was dissolved in water (15 mL) and extracted with CH₂Cl₂ (3 × 50 mL). The combined organic phase was dried (Na₂SO₄), filtered and concentrated. The crude product was purified by column chromatography on silica gel with an appropriate solvent mixture (CHCl₃:MeOH = 19:1). Purification by recrystallization from a mixture of n-hexane:Et₂O resulted in compounds 20–23 or 32–35, respectively.

4.5.1. (1S,2R,5R)-2-((S)-1-(Benzylamino)-2-hydroxypropan-2-yl)-5-methylcyclohexanol (20)

Yield: 40%, white crystals, m.p.: 146–148 °C. ${[\alpha ]}_D^{20}$ = +15.0 (c 0.27, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.83 (3H, d, J = 6.4 Hz), 0.83–0.93 (1H, m), 0.95–1.03 (1H, m), 1.07–1.17 (1H, m), 1.31 (3H, s), 1.50 (1H, d, J = 12.4 Hz), 1.64 (1H, d, J = 12.5 Hz), 1.70–1.80 (2H, m), 1.89 (1H, brs), 2.78 (1H, t, J = 11.4 Hz), 2.95 (1H, t, J = 10.6 Hz), 3.29 (1H, brs), 3.74 (1H, s), 3.92–3.96 (1H, m), 4.49–4.53 (2H, m), 6.89 (1H, brs), 7.42 (5H, s), 10.2 (1H, s). ¹³C NMR (125 MHz, CDCl₃): δ = 21.8, 21.9, 25.6, 29.6, 35.0, 42.2, 50.2, 51.2, 51.3, 65.2, 71.6, 129.5, 129.8, 130.2, 130.4. Anal. Calcd for C₁₇H₂₇NO₂: C, 73.61; H, 9.81; N, 5.05. Found: C, 73.65; H, 9.80; N, 5.10.

4.5.2. (1S,2R,5R)-2-((S)-2-Hydroxy-1-(((R)-1-phenylethyl)amino)propan-2-yl)-5-methylcyclohexanol (21)

Yield: 43%, white crystals, m.p.: 118–119 °C. ${[\alpha ]}_D^{20}$ = +5.0 (c 0.295, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.85 (3H, d, J = 6.3 Hz), 0.84–0.89 (2H, m), 1.05–1.15 (2H, m), 1.25–1.33 (1H, m), 1.28 (3H, s), 1.52 (1H, d, J = 9.3 Hz), 1.63–1.65 (1H, m), 1.70–1.88 (3H, m), 1.79 (3H, s), 2.56 (1H, s), 2.97 (1H, s), 4.06 (1H, brs), 4.26 (1H, s), 4.59 (1H, s), 6.99 (1H, s), 7.30–7.50 (5H, m), 10.3 (1H, s). ¹³C NMR (125 MHz, CDCl₃): δ = 20.7, 21.8, 22.0, 25.8, 29.8, 35.1, 42.3, 50.3, 51.1, 59.4, 65.4, 71.6, 127.9, 129.6, 129.9, 135.8. Anal. Calcd for C₁₈H₂₉NO₂: C, 74.18; H, 10.03; N, 4.81. Found: C, 74.20; H, 10.05; N, 4.80.

4.5.3. (1S,2R,5R)-2-((S)-2-hydroxy-1-(((S)-1-phenylethyl)amino)propan-2-yl)-5-methylcyclohexanol (22)

Yield: 43%, white crystals, m.p.: 160–161 °C. ${[\alpha ]}_D^{20}$ = −9.0 (c 0.255, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.87 (3H, d, J = 6.3 Hz), 0.87–0.95 (1H, m), 1.04 (1H, t, J = 14.5 Hz), 1.19 (3H, s), 1.34 (2H, d, J = 10.5 Hz), 1.42 (3H, d, J = 6.87 Hz), 1.59–1.68 (1H, m), 1.75–1.77 (1H, m), 1.90–1.97 (1H, m), 2.36 (1H, d, J = 12.1 Hz), 2.54 (1H, d, J = 12.1 Hz), 3.73 (1H, q, J = 6.6 Hz), 4.29 (1H, s), 7.26–7.36 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.1, 22.4, 23.1, 26.0, 29.0, 35.6, 42.3, 52.3, 52.7, 58.5, 64.6, 74.1, 126.6, 127.5, 128.8, 143.9. Anal. Calcd for C₁₈H₂₉NO₂: C, 74.18; H, 10.03; N, 4.81. Found: C, 74.15; H, 10.02; N, 4.85.

4.5.4. (1S,2R,5R)-2-((S)-2-Hydroxy-1-(isopropylamino)propan-2-yl)-5-methylcyclohexanol (23)

Yield: 88%, yellow oil. ${[\alpha ]}_D^{20}$ = +20.0 (c 0.245, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.87 (3H, d, J = 6.1 Hz), 0.95–1.01 (1H, m), 1.16 (1H, t, J = 13.3 Hz), 1.35 (3H, d, J = 6.5 Hz), 1.39 (3H, s), 1.389 (3H, d, J = 6.8 Hz), 1.30–1.53 (3H, m), 1.59 (1H, d, J = 12.0 Hz), 1.78–1.87 (3H, m), 2.91 (1H, t, J = 11.1 Hz), 2.97–3.03 (1H, m), 3.39 (1H, quin, J = 6.0 Hz), 3.85 (1H, brs), 4.54 (1H, s), 6.37 (1H, s), 9.77 (1H, s). ¹³C NMR (125 MHz, CDCl₃): δ =19.1, 19.6, 22.0, 22.2, 25.8, 29.6, 35.1, 42.1, 49.0, 51.0., 51.2, 65.3, 71.6. Anal. Calcd for C₁₃H₂₇NO₂: C, 68.08; H, 11.87; N, 6.11. Found: C, 68.10; H, 11.85; N, 6.13.

4.5.5. (S)-3-(Benzylamino)-2-((1R,2S,4R)-2-hydroxy-4-methylcyclohexyl)propane-1,2-diol (32)

Yield: 60%, colorless oil. ${[\alpha ]}_D^{20}$ = +20.0 (c 0.26, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.81 (3H. d, J = 6.3 Hz), 0.80–0.87 (1H, m), 1.01 (1H, t, J = 13.2 Hz), 1.30–1.38 (2H, m), 1.50 (1H, t, J = 7.8 Hz), 1.63 (1H, d, J = 12.5 Hz), 1.67–1.77 (2H, m), 2.85 (1H, dd, J = 12.8, 21.0 Hz), 3.32 (1H, d, J = 11.4 Hz), 3.41 (1H, d, J = 11.3 Hz), 4.11 (1H, q, J = 12.8 Hz), 4.98 (1H, s), 7.41–7.47 (5H, m). ¹³C NMR (125 MHz, DMSO-d₆): δ = 21.0, 22.1, 25.3, 34.6, 41.8, 45.6, 48.4, 50.8, 64.3, 66.0, 73.7, 128.7, 128.8, 129.9, 132.4. Anal. Calcd for C₁₃H₂₇NO₃: C, 69.59; H, 9.28; N, 4.77. Found: C, 69.60; H, 9.25; N, 4.82.

4.5.6. (S)-2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)-3-(((R)-1-phenylethyl)amino)propane-1,2-diol (33)

Yield: 60%, colorless oil. ${[\alpha ]}_D^{20}$ = +10.0 (c 0.24, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.81 (3H, d, J = 6.3 Hz), 0.80–0.85 (1H, m), 1.01 (1H, t, J = 12.9 Hz), 1.10–1.15 (1H, m), 1.19–1.23 (1H, m), 1.49 (1H. d, J = 12.5 Hz), 1.55 (3H, d, J = 6.7 Hz), 1.54–1.58 (1H, m), 1.67–1.75 (2H, m), 2.54 (1H, d, J = 13.0 Hz), 2.83 (1H, d, J = 12.7 Hz), 3.27 (1H, d, J = 11.3 Hz), 4.12 (1H, s), 4.32 (1H, d, J = 6.3 Hz), 5.03 (1H, s), 5.11 (1H, brs), 6.05 (1H, brs), 7.39–7.50 (5H, m), 8.72 (1H, brs), 9.40 (1H, brs). ¹³C NMR (125 MHz, DMSO-d₆): δ = 19.0, 21.2, 22.1, 25.3, 34.6, 41.7, 45.6, 46.7, 57.5, 64.1, 66.2, 73.9, 127.9, 128.9, 129.0, 137.1. Anal. Calcd for C₁₈H₂₇NO₃: C, 70.32; H, 9.51; N, 4.56. Found: C, 70.35; H, 9.55; N, 4.52.

4.5.7. (S)-2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)-3-(((S)-1-phenylethyl)amino)propane-1,2-diol (34)

Yield: 80%, colorless oil. ${[\alpha ]}_D^{20}$ = +3.0 (c 0.235, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.83 (3H, d, J = 6.2 Hz), 0.82–0.92 (1H, m), 1.04 (1H, t, J = 12.9 Hz), 1.31–1.44 (2H, m), 1.49–1.55 (1H, m), 1.54 (3H, d, J = 6.8 Hz), 1.65 (1H, d, J = 12.5 Hz), 1.70–1.79 (2H, m), 2.56 (1H, d, J = 12.7 Hz), 2.73 (1H, d, J = 12.7 Hz), 3.27 (1H, d, J = 11.3 Hz), 3.33 (1H, s), 4.19 (1H, s), 4.33 (1H, q, J = 6.6 Hz), 5.02 (1H, s), 7.39–7.53 (5H, m). ¹³C NMR (125 MHz, DMSO-d₆): δ = 19.4, 21.2, 22.1, 25.4, 34.6, 41.8, 45.6, 47.1, 57.5, 64.3, 66.0, 73.7, 127.7, 128.9, 137.2. Anal. Calcd for C₁₈H₂₇NO₃: C, 70.32; H, 9.51; N, 4.56. Found: C, 70.30; H, 9.48; N, 4.60.

4.5.8. (S)-2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)-3-(isopropylamino)propane-1,2-diol (35)

Yield: 75%, colorless oil. ${[\alpha ]}_D^{20}$ = +15.0 (c 0.29, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.83 (3H, d, J = 6.2 Hz), 0.83–0.90 (1H, m), 1.05 (1H, t, J = 12.8 Hz), 1.20 (6H, d, J = 6.3 Hz), 1.40–1.47 (2H, m), 1.54–1.57 (1H, m), 1.65–1.80 (3H, m), 2.86 (1H, dd, J = 12.8, 25.4 Hz), 3.25 (1H, quin, J = 6.4 Hz), 3.43 (1H, d, J = 11.3 Hz), 4.19 (1H, s), 5.03 (1H, s). ¹³C NMR (125 MHz, DMSO-d₆): δ = 18.2, 18.8, 21.2, 22.1, 25.4, 34.7, 42.0, 45.6, 46.0, 50.0, 64.3, 65.7, 73.7. Anal. Calcd for C₁₃H₂₇NO₃: C, 63.64; H, 11.09; N, 5.71. Found: C, 63.63; H, 11.05; N, 4.75.

4.6. General Procedure for Ring Closure with Formaldehyde

To a solution of aminodiols 9–12 or 20–23 (1.8 mmol) in 5 mL Et₂O was added 20 mL of 35% aqueous formaldehyde and the mixture was stirred at room temperature. After 1 h, it was made alkaline with 10% aqueous KOH (20 mL) and extracted with Et₂O (3 × 50 mL). After drying (Na₂SO₄) and solvent evaporation crude products 14–17 or 25–28 were purified by column chromatography (CHCl₃:MeOH = 19:1).

4.6.1. (1S,2S,5R)-2-((S)-3-Benzyl-1,3-oxazinan-5-yl)-5-methylcyclohexanol (14)

Yield: 64%, colorless oil. ${[\alpha ]}_D^{20}$ = −4.0 (c, 0.285 MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.86 (3H, d, J = 6.4 Hz), 0.86–0.94 (1H, m), 1.07 (1H, t, J = 12.6 Hz), 1.25–1.33 (2H, m), 1.56–1.62 (1H, m), 1.70–1.73 (1H, m), 1.75–1.90 (3H, m), 2.64 (1H, s), 2.85 (1H, s), 3.58–3.67 (3H, m), 3.90 (2H, d, J = 7.4 Hz), 4.13 (1H, s), 4.32 (1H, d, J = 8.2 Hz), 7.25–7.33 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 24.5, 26.0, 35.3, 42.3, 44.7, 52.3, 57.4, 65.9, 72.1, 85.0, 127.6, 128.6, 129.3, 136.6. Anal. Calcd for C₁₈H₂₇NO₂: C, 74.70; H, 9.40; N, 4.84. Found: C, 74.73; H, 9.37; N, 4.85.

4.6.2. (1S,2S,5R)-5-Methyl-2-((S)-3-((R)-1-phenylethyl)-1,3-oxazinan-5-yl)cyclohexanol (15)

Yield: 65%, colorless oil. ${[\alpha ]}_D^{20}$ = +11.0 (c 0.28, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.84 (3H, d, J = 6.3 Hz), 0.84–0.89 (1H, m), 1.03 (1H, t, J = 12.8 Hz), 1.15–1.27 (2H, m), 1.41 (3H, d, J = 6.6 Hz), 1.42–1.50 (1H, m), 1.65–1.70 (1H, m), 1.70–1.85 (3H, m), 2.43 (1H, s), 2.65 (1H, s), 3.66 (1H, s), 3.71 (1H, s), 3.85 (1H, d, J = 8.2 Hz), 4.00 (1H, s), 4.11 (1H, brs), 4.54 (1H, d, J = 5.4 Hz), 7.26–7.36 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 20.2, 22.5, 24.3, 26.0, 35.3, 42.2, 44.5, 49.7, 59.8, 65.8, 71.9, 83.5, 127.6, 127.7, 128.6. Anal. Calcd for C₁₉H₂₉NO₂: C, 75.21; H, 9.63; N, 4.62. Found: C, 75.25; H, 9.60; N, 4.65.

4.6.3. (1S,2S,5R)-5-Methyl-2-((S)-3-((S)-1-phenylethyl)-1,3-oxazinan-5-yl)cyclohexanol (16)

Yield: 65%, colorless oil. ${[\alpha ]}_D^{20}$ = −22.0 (c 0.27, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.88 (3H, d, J = 6.4 Hz), 0.91–0.99 (1H, m), 1.11 (1H, td, J = 1.9, 12.9 Hz), 1.25–1.30 (1H, m), 1.35–1.45 (1H, m), 1.43 (3H, d, J = 6.7 Hz), 1.70–1.80 (3H, m), 1.90 (2H, d, J = 12.0 Hz), 2.60 (1H, brs), 3.14 (1H, d, J = 8.7 Hz), 3.54 (1H, s), 3.64 (1H, s), 3.72 (1H, d, J = 10.2 Hz), 3.79 (1H, d, J = 8.6 Hz), 4.22 (1H, s), 4.26 (1H, d, J = 8.2 Hz), 7.23–7.33 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 20.3, 22.5, 24.9, 26.1, 35.5, 42.2, 45.5, 49.5, 60.5, 65.8, 72.1, 83.8, 127.4, 127.5, 128.7, 142.5. Anal. Calcd for C₁₉H₂₉NO₂: C, 75.21; H, 9.63; N, 4.62. Found: C, 75.20; H, 9.65; N, 4.65.

4.6.4. (1S,2S,5R)-2-((S)-3-Isopropyl-1,3-oxazinan-5-yl)-5-methylcyclohexanol (17)

Yield: 83%, colorless oil. ${[\alpha ]}_D^{20}$ = −2.0 (c 0.20, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = ¹³C NMR (125 MHz, CDCl₃): δ = 0.85 (3H, d, J = 6.4 Hz), 0.85–0.90 (1H, m), 0.90–0.97 (1H, m), 1.06–1.11 (1H, m), 1.09 (3H, d, J = 4.7 Hz), 1.10 (3H, d, J = 4.8 Hz), 1.19–1.30 (3H, m), 1.40–1.45 (1H, m), 1.72–1.75 (3H, m), 1.80–1.90 (2H, m), 2.55–2.75 (1H, m), 2.83 (1H, quin, J = 6.4 Hz), 2.90 (1H, d, J = 11.1 Hz), 3.79 (2H, s), 3.98 (1H, s), 4.22 (1H, s), 4.45 (1H, d, J =7.7 Hz). ¹³C NMR (125 MHz, CDCl₃): δ = 18.6, 18.8, 22.5, 25.0, 26.1, 29.8, 35.6, 42.2, 45.8, 47.3, 51.2, 65.7, 72.2, 82.8. Anal. Calcd for C₁₄H₂₇NO₂: C, 69.66; H, 11.27; N, 5.80. Found: C, 69.70; H, 9.29; N, 4.78.

4.6.5. (1S,2R,5R)-2-((S)-3-Benzyl-5-methyloxazolidin-5-yl)-5-methylcyclohexanol (25)

Yield: 60%, colorless oil. ${[\alpha ]}_D^{20}$ = +29.0 (c 0.24, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.86 (3H, d, J = 6.4 Hz), 0.85–0.90 (1H, m), 1.00–1.05 (1H, m), 1.33 (3H, s), 1.33–1.38 (2H, m), 1.52–1.56 (1H, m), 1.73 (1H, d, J = 12.8 Hz), 1.82–1.92 (2H, m), 2.06 (1H, d, J = 9.4 Hz), 3.35 (1H, d, J = 9.3 Hz), 3.53 (1H, d, J = 12.6 Hz), 3.73 (1H, d, J = 12.6 Hz), 3.90 (1H, s), 4.26 (1H, s), 4.57 (1H, s), 5.80 (1H, brs), 7.26–7.34 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.4, 23.1, 26.2, 27.2, 35.3, 41.8, 51.1, 56.5, 58.9, 65.4, 84.9, 85.8, 127.8, 128.7, 128.9, 136.9. Anal. Calcd for C₁₈H₂₇NO₂: C, 74.70; H, 9.40; N, 4.84. Found: C, 74.68; H, 9.35; N, 4.80.

4.6.6. (1S,2R,5R)-5-Methyl-2-((S)-5-methyl-3-((R)-1-phenylethyl)oxazolidin-5-yl)cyclohexanol (26)

Yield: 65%, colorless oil. ${[\alpha ]}_D^{20}$ = +3.0 (c 0.30, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.84 (3H, d, J = 6.5 Hz), 0.83–0.89 (1H, m), 1.02 (1H, td, J = 2.0, 12.2 Hz), 1.19–1.30 (2H, m), 1.26 (3H, s), 1.29–1.43 (2H, m), 1.36 (3H, t, J = 6.1 Hz), 1.66 (1H, d, J = 12.8 Hz), 1.80–1.92 (2H, m), 2.92 (1H, d, J = 7.8 Hz), 3.30 (1H, d, J = 4.8 Hz), 4.20 (1H, s), 4.30 (1H, s), 4.91 (1H, s), 5.94 (1H, brs), 7.27–7.37 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.4, 22.5, 22.9, 26.1, 27.3, 35.3, 41.8, 51.2, 58.0, 63.4, 65.4, 85.0, 85.4, 127.0, 127.8, 129.0, 143.0. Anal. Calcd for C₁₉H₂₉NO₂: C, 75.21; H, 9.63; N, 4.62. Found: C, 75.19; H, 9.65; N, 4.63.

4.6.7. (1S,2R,5R)-5-Methyl-2-((S)-5-methyl-3-((S)-1-phenylethyl)oxazolidin-5-yl)cyclohexanol (27)

Yield: 65%, colorless oil. ${[\alpha ]}_D^{20}$ = +28.0 (c 0.20, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.88 (3H, d, J = 6.3 Hz), 0.89–1.08 (1H, m), 1.05 (1H, t, J = 12.8 Hz), 1.34 (3H, s), 1.41 (3H, d, J = 7.7 Hz), 1.37–1.42 (2H, m), 1.62–1.70 (1H, m), 1.75–1.82 (1H, m), 1.85–1.95 (2H, m), 2.04 (1H, d, J = 8.4 Hz), 3.27 (1H, s), 3.59 (1H, d, J = 7.3 Hz), 3.77 (1H, s), 4.26 (2H, s), 7.26–7.34 (5H, m). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 23.2, 26.3, 27.2, 35.4, 41.8, 51.2, 57.3, 62.6, 65.4, 85.2, 85.5, 126.7, 127.8, 129.0, 143.2. Anal. Calcd for C₁₉H₂₉NO₂: C, 75.21; H, 9.63; N, 4.62. Found: C, 75.25; H, 9.60; N, 4.60.

4.6.8. (1S,2R,5R)-2-((S)-3-Isopropyl-5-methyloxazolidin-5-yl)-5-methylcyclohexanol (28)

Yield: 70%, colorless oil. ${[\alpha ]}_D^{20}$ = +14.0 (c 0.25, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.84 (3H, d, J = 6.4 Hz), 0.85–0.92 (1H, m), 1.00–1.06 (1H, m), 1.05 (3H, d, J = 6.2 Hz), 1.10 (3H, d, J = 6.3 Hz), 1.30 (3H, s), 1.32–1.37 (2H, m), 1.52–1.61 (1H, m), 1.71–1.74 (1H, m), 1.77–1.87 (2H, m), 1.91 (1H, d, J = 9.1 Hz), 2.40 (1H, quin, J = 6.2 Hz), 3.37 (1H, d, J = 9.1 Hz), 3.89 (1H, s), 4.22 (1H, s), 4.73 (1H, s), 6.17 (1H, brs). ¹³C NMR (125 MHz, CDCl₃): δ = 21.7, 21.9, 22.5, 23.1, 26.2, 27.1, 35.4, 41.9, 51.4, 52.2, 56.8, 65.3, 84.8, 85.0. Anal. Calcd for C₁₄H₂₇NO₂: C, 69.66; H, 11.27; N, 5.80. Found: C, 69.70; H, 11.25; N, 4.84.

4.7. General Procedure for Debenzylation

To a suspension of palladium-on-carbon (5% Pd, 0.22 g) in MeOH (50 mL) was added aminodiols 9–11, 20–22 or aminotriols 32–34 (14.0 mmol) in MeOH (100 mL), and the mixture was stirred under a H₂ atmosphere (1 atm) at room temperature. After completion of the reaction (as monitored by TLC, 24 h), the mixture was filtered through a Celite pad and the solution was evaporated to dryness. The crude products were recrystallized in diethyl ether, resulting in primary aminodiols 13 and 24 or aminotriol 36, respectively.

4.7.1. (1S,2S,5R)-2-((S)-1-Amino-3-hydroxypropan-2-yl)-5-methylcyclohexanol (13)

Yield: 50%, colorless oil. ${[\alpha ]}_D^{20}$ = +21.0 (c 0.25, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.85 (3H, d, J = 5.8 Hz), 0.90–0.95 (1H, m), 1.10 (1H, t, J = 12.3 Hz), 1.24 (1H, s), 1.35–1.45 (2H, m) 1.58 (1H, t, J = 12.0 Hz), 1.60–1.87 (5H, m), 2.85–3.00 (2H, m), 3.42 (4H, brs), 3.60–3.70 (1H, m), 3.70–3.80 (1H, m), 3.98 (1H, s). ¹³C NMR (125 MHz, CDCl₃): δ = 22.5, 24.7, 26.2, 35.4, 40.9, 42.0, 42.4, 44.7, 62.8, 63.7, 66.7. Anal. Calcd for C₁₀H₂₁NO₂: C, 64.13; H, 11.30; N, 7.48. Found: C, 64.15; H, 11.28; N, 7.50.

4.7.2. (1S,2R,5R)-2-((S)-1-Amino-2-hydroxypropan-2-yl)-5-methylcyclohexanol (24)

Yield: 72%, white crystals, m.p.: 139–140 °C. ${[\alpha ]}_D^{20}$ = +12.0 (c 0.295, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.82 (3H, d, J = 6.3 Hz), 0.78–0.87 (1H, m), 1.01 (1H, t, J = 12.6 Hz), 1.17 (3H, s), 1.30–1.33 (1H, m), 1.45–1.48 (2H, m), 1.70–1.75 (3H, m), 2.62 (1H, d, J = 12.8 Hz), 2.92 (1H, d, J = 12.9 Hz), 4.10 (1H, s), 4.95 (1H, s). ¹³C NMR (125 MHz, DMSO-d₆): δ = 20.9, 22.3, 25.1, 25.4, 34.8, 42.6, 45.1, 49.7, 64.4, 71.0. Anal. Calcd for C₁₀H₂₁NO₂: C, 64.13; H, 11.30; N, 7.48. Found: C, 64.15; H, 11.28; N, 7.50.

4.7.3. (S)-3-Amino-2-((1R,2S,4R)-2-hydroxy-4-methylcyclohexyl)propane-1,2-diol (36)

Yield: 72%, colorless oil. ${[\alpha ]}_D^{20}$ = +22.0 (c 0.275, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.82 (3H, d, J = 6.3 Hz), 0.82–0.88 (1H, m), 1.02 (1H, t, J = 13.2 Hz), 1.45–1.50 (3H, m), 1.67–1.74 (3H, m), 2.78–2.87 (2H, m), 3.31–3.47 (2H, m), 4.12 (1H, s), 4.89 (1H, brs), 5.14 (1H, brs), 5.37 (1H, brs), 7.65 (3H, s). ¹³C NMR (125 MHz, DMSO-d₆): δ = 20.6, 22.2, 25.4, 34.7, 45.5, 42.2, 45.2, 64.5, 65.8, 73.2. Anal. Calcd for C₁₀H₂₁NO₃: C, 59.08; H, 10.41; N, 6.89. Found: C, 59.10; H, 10.45; N, 6.85.

4.8. General Procedure for Dihydroxylation

To a solution of compounds 2–4 (14 mmol) in acetone (60 mL), an aqueous solution of NMO (12 mL, 50% aqueous solution) and a solution of OsO₄ in t-BuOH (6 mL, 2% t-BuOH solution) were added in one portion. The reaction mixture was stirred at room temperature for 24 h, and then quenched by the addition of a saturated aqueous solution of Na₂SO₃ (100 mL) and extracted with EtOAc (3 x 80 mL). The organic layer was dried and evaporated. The crude products were purified by chromatography on silica gel by using n-hexane:EtOAc (1:4 for compounds 18 and 29 and 1:9 for compound 37). The products after purification were recrystallized in diethyl ether resulting in compounds 18, 29 and 37 as white crystals.

4.8.1. (3R,3aR,6R,7aS)-3-Hydroxy-3-(hydroxymethyl)-6-methylhexahydrobenzofuran-2(3H)-one (18)

Yield: 50%, white crystals, m.p.: 73–75 °C. ${[\alpha ]}_D^{20}$ = −63.0 (c 0.26, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.86 (3H, d, J = 6.4 Hz), 0.83–0.95 (2H, m), 1.19–1.25 (1H, m), 1.34–1.39 (1H, m), 1.56 (1H, d, J = 12.4 Hz), 1.73–1.77 (1H, m), 2.05–2.13 (2H, m), 3.46 (1H, dd, J = 6.0, 11.9 Hz), 3.54 (1H, dd, J = 4.8, 12.0 Hz), 4.77 (1H, t, J = 5.7 Hz), 4.81 (1H, q, J = 3.4 Hz), 5.84 (1H, s). ¹³C NMR (125 MHz, DMSO-d₆): δ = 21.1, 21.2, 25.9, 31.6, 35.4, 43.0, 61.0, 77.1, 79.5, 176.0. Anal. Calcd for C₁₀H₁₆O₄: C, 63.80; H, 10.71. Found: C, 63.83; H, 10.69.

4.8.2. (R)-2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)propane-1,2-diol (29)

Yield: 61%, white crystals, m.p.: 137–139 °C. ${[\alpha ]}_D^{20}$ = +12.0 (c 0.275, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.80 (3H, d, J = 6.5 Hz), 0.85–0.79 (1H, m), 0.95 (1H, t, J = 11.9 Hz), 1.05 (3H, s), 1.30–1.32 (1H, m), 1.48–1.57 (2H, m), 1.65–1.74 (3H, m), 3.11 (1H, dd, J = 5.7, 10.5 Hz), 3.43 (1H, dd, J = 5.2, 10.5 Hz), 4.12 (1H, s), 4.40 (1H, s), 4.80 (1H, t, J = 5.4 Hz), 4.83 (1H, d, J = 1.9 Hz). ¹³C NMR (125 MHz, DMSO-d₆): δ = 19.8, 22.4, 23.8, 25.4, 34.9, 42.4, 45.3, 65.8, 67.3, 73.9. Anal. Calcd for C₁₀H₂₀O₃: C, 63.80; H, 10.71. Found: C, 63.78; H, 10.75.

4.8.3. 2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)propane-1,2,3-triol (37)

Yield: 40%, white crystals, m.p.: 93–95 °C. ${[\alpha ]}_D^{20}$ = +17.0 (c 0.235, MeOH). ¹H NMR (500 MHz, DMSO-d₆): δ = 0.80 (3H, d, J = 6.5 Hz), 0.82–0.85 (1H, m), 0.96 (1H, t, J = 12.2 Hz), 1.46–1.57 (3H, m), 1.65–1.68 (2H, m), 1.73–1.75 (1H, m), 3.38–3.43 (2H, m), 4.09 (1H, s), 4.26 (1H, s), 4.49 (1H, t, J = 5.6 Hz), 4.73 (1H, t, J = 5.4 Hz), 4.95 (1H, d, J = 1.0 Hz). ¹³C NMR (125 MHz, DMSO-d₆): δ = 19.8, 22.4, 25.4, 35.0, 42.3, 43.3, 63.1, 63.2, 65.4, 75.6, 75.6. Anal. Calcd for C₁₀H₂₀O₄: C, 58.80; H, 9.87. Found: C, 58.83; H, 9.85.

4.9. (S)-4-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)-4-methyl-1,3-dioxolan-2-one (30)

To the solution of 29 (2.00 mmol) in dry pyridine (8.22 mmol) and dry CH₂Cl₂ (20 mL), triphosgene (1.00 mmol) in dry CH₂Cl₂ (5 mL) was added under cooling in an ice bath. After stirring at room temperature for 2 h under Ar atmosphere, the consumption of 29 was confirmed by TLC. Then water (20 mL) was added to the solution and then the organic layer was washed with saturated aqueous NH₄Cl solution. The organic layer was collected, dried over anhydrous Na₂SO₄ and filtered. The crude product after evaporation was purified by column chromatography on silica gel (n-hexane:EtOAc = 4:1) to obtain 30 in a 60% yield.

Yield: 60%, colorless oil. ${[\alpha ]}_D^{20}$ = +35.0 (c 0.28, MeOH). ¹H NMR (500 MHz, CDCl₃): δ = 0.95 (3H, d, J = 6.2 Hz), 1.16–1.25 (1H, m), 1.57 (3H, s), 1.58–1.70 (2H, m), 1.74–1.80 (1H, m), 1.94–2.08 (2H, m), 2.13–2.20 (1H, m), 4.11 (1H, d, J = 8.2 Hz), 4.27 (1H, d, J = 8.2 Hz), 5.78 (1H, t, J = 1.8 Hz). ¹³C NMR (125 MHz, CDCl₃): δ = 21.6, 24.0, 24.3, 28.1, 30.6, 33.4, 74.2, 85.0, 123.4, 135.6, 154.8. Anal. Calcd for C₁₁H₁₈O₄: C, 61.66; H, 8.47. Found: C, 66.63; H, 10.51.

(R)-2-((1R,2S,4R)-2-Hydroxy-4-methylcyclohexyl)propane-1,2-diol (29)

Compound 19 (0.60 mmol) was treated with DMSO (3.0 mL) and 3 M NaOH (3.0 mL). The resulting homogenous solution was stirred at 80 °C for 2 hours. After being cooled to room temperature, EtOAc (20 mL) was added and the aqueous layer was washed with EtOAc (3 x 20 mL). The combined organic layers were dried over Na₂SO₄, filtered and concentrated in vacuo. The crude material was purified by column chromatography on silica gel (n-hexane:EtOAc = 1:4) then recrystallized in Et₂O to provide compound 29 (60%).

4.10. General Procedure for the Reaction of Benzaldehyde with Diethylzinc in the Presence of Chiral Catalysts

To the respective catalyst (0.1 mmol), 1 M Et₂Zn in n-hexane solution (3 mL, 3 mmol) was added under an argon atmosphere at room temperature. The solution was stirred for 25 min at room temperature then benzaldehyde (1 mmol) was added. After stirring at room temperature for a further 20 h, the reaction was quenched with saturated NH₄Cl solution (15 mL) and the mixture was extracted with EtOAc (2 × 20 mL). The combined organic phase was washed with H₂O (10 mL), dried (Na₂SO₄) and evaporated under vacuum. The crude secondary alcohols obtained were purified by flash column chromatography (n-hexane:EtOAc = 4:1). The ee and absolute configuration of the resulting material were determined by chiral GC on CHIRASIL-DEX CB column after O-acetylation in Ac₂O/DMPA/pyridine.

4.11. Antimicrobial Analyses

For the antimicrobial analyses, the pure compounds were first dissolved in MeOH and diluted with H₂O to two concentration levels (400 µg/mL and 40 µg/mL)—keeping the final MeOH content at 10%. Then, these solutions were investigated in microdilution assay with two Gram-positive bacteria including Bacillus subtilis SZMC 0209 and Staphylococcus aureus SZMC 14611, two Gram-negative bacteria Escherichia coli SZMC 6271 and Pseudomonas aeruginosa SZMC 23290, as well as two yeast strains Candida albicans SZMC 1533 and C. krusei SZMC 1352 according to the M07-A10 CLSI guideline [55] and our previous work [56]. Suspensions of the test microbes were prepared from overnight cultures cultivated in ferment broth (bacteria: 10 g/L peptone, 5 g/L NaCl, 5 g/L yeast extract; yeast: 20 g/L peptone, 10 g/L yeast extract, 20 g/L glucose) at 37 °C. Then the concentrations of the suspensions were set to 2 x 10⁵ cells/mL with sterile media. For the assay, 96-well plates were prepared by dispensing into each well 100 μL of suspension containing the bacterial or yeast cells and 50 μL of sterile broth as well as 50 μL of the test solutions and incubated for 24 h at 37 °C. The mixture of 150 μL broth and 50 μL of 10% methanol was used as the blank sample for the background correction, while 100 μL of microbial suspension supplemented with 50 μL sterile broth and 50 μL of 10% methanol was applied as negative control. The positive control contained ampicillin (Sigma) or nystatin (Sigma) for bacteria or fungi, respectively at two concentration levels (100 µg/mL and 10 µg/mL). The inhibitory effects of the derivatives were observed spectrophotometrically at 620 nm after the incubation, and inhibition was calculated as the percentage of the positive control after blank correction.

5. Conclusions

Starting from the commercially available (−)-isopugeol, a new family of isopulegol-based chiral aminodiol, aminotriol libraries and di-, tri- and tetraols were prepared through chiral (+)-neoisopulegol as key intermediate via stereoselective transformations.

The resulting aminodiols exert moderate antimicrobial action on a panel of bacterial and fungal strains, while aminodiol and aminotriol derivatives were applied as chiral catalysts in the enantioselective addition of diethylzinc to benzaldehyde with moderate but significantly opposite stereoselectivity.