Next Article in Journal
Identification and Functional Analysis of the CLAVATA3/EMBRYO SURROUNDING REGION (CLE) Gene Family in Wheat
Next Article in Special Issue
Iron Release Profile of Silica-Modified Zero-Valent Iron NPs and Their Implication in Cancer Therapy
Previous Article in Journal
The Role of the Molecular Clock in Promoting Skeletal Muscle Growth and Protecting against Sarcopenia
Previous Article in Special Issue
Magnetorheological Hybrid Elastomers Based on Silicone Rubber and Magnetorheological Suspensions with Graphene Nanoparticles: Effects of the Magnetic Field on the Relative Dielectric Permittivity and Electric Conductivity
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Polyvinyl Butyral (PVB) Nanofiber/Nanoparticle-Covered Yarns for Antibacterial Textile Surfaces

1
Department of Nanotechnology and Informatics, Institute of Nanomaterials, Advanced Technologies and Innovation, Technical University of Liberec, Studentska 1402/2, 46117 Liberec, Czech Republic
2
Institute for New Technologies and Applied Informatics, Faculty of Mechatronics, Technical University of Liberec, Studentska 1402/2, 46117 Liberec, Czech Republic
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2019, 20(17), 4317; https://0-doi-org.brum.beds.ac.uk/10.3390/ijms20174317
Submission received: 10 July 2019 / Revised: 27 August 2019 / Accepted: 2 September 2019 / Published: 3 September 2019
(This article belongs to the Special Issue Nano-Materials and Methods)

Abstract

:
In this study, nanoparticle-incorporated nanofiber-covered yarns were prepared using a custom-made needle-free electrospinning system. The ultimate goal of this work was to prepare functional nanofibrous surfaces with antibacterial properties and realize high-speed production. As antibacterial agents, we used various amounts of copper oxide (CuO) and vanadium (V) oxide (V2O5) nanoparticles (NPs). Three yarn preparation speeds (100 m/min, 150 m/min, and 200 m/min) were used for the nanofiber-covered yarn. The results indicate a relationship between the yarn speed, quantity of NPs, and antibacterial efficiency of the material. We found a higher yarn speed to be associated with a lower reduction in bacteria. NP-loaded nanofiber yarns were proven to have excellent antibacterial properties against Gram-negative Escherichia coli (E. coli). CuO exhibited a greater inhibition and bactericidal effect against E. coli than V2O5. In brief, the studied samples are good candidates for use in antibacterial textile surface applications, such as wastewater filtration. As greater attention is being drawn to this field, this work provides new insights regarding the antibacterial textile surfaces of nanofiber-covered yarns.

Graphical Abstract

1. Introduction

Nanofibers have attracted growing attention due to their high surface area, highly porous structure, narrow pore size, and low density. The superior properties of nanofibers enable their use in various fields, such as wastewater filtration [1,2], distillation [3,4], desalination [5,6], air filtration [7,8], biomedical application [9,10], gas sensors [11,12], batteries [13,14], data storage [15], and solar cells [16]. Apart from their many advantages, the weak mechanical properties of nanofibers restrict their use in a wider variety of applications. Grothe et al. [17] found that the dimensional stability of nanofibers changes in wet applications. Attempts have been made to improve the mechanical weakness of nanofibers, including polymer blending [18], inorganic blending [19], the use of epoxy composites [20], thermal lamination [21], dip-coating [22], and ultrasonic welding [23].
Recently, considerable effort has been expended to obtain mechanically durable nanofiber yarns to use in smart textiles. The techniques that have been used in the preparation of nanofiber yarns include: (1) direct collection by self-bundling [24], (2) deposition onto a non-solvent [25,26,27], and (3) drawing and twisting from the collector material [28,29]. Wang et al. [24] used the self-bundling electrospinning method to produce continuous nanofiber yarns. In this technology, single-needle electrospinning with a grounded needle tip is used to self-bundle nanofibers at the beginning of the electrospinning process, then the self-bundled yarn is pulled back and wound on a grounded rotating collector. Although the resulting yarns are well aligned, the productivity of this method is extremely low. Smit et al. [26] used another technique involving solution spinning onto a non-solvent reservoir collector and then drawing. However, the theoretical production rate is assumed to be 180 m/hr, which is only suitable for lab-scale production. In another work [29], the authors placed a neutral copper funnel between two oppositely charged needles in a needle electrospinning device. Nanofibers were then collected on a copper plate covered with aluminum foil, which was adhered to the face of the copper funnel. With the funnel rotating at approximately 150 rpm, the collected nanofiber bundle was twisted into yarn. These yarns were then collected onto a winder rotating at a rate of approximately 8 mm/min. The authors found the polymer concentration to significantly affect the ability to form nano yarns, and also that the electrospinning parameters were fairly limited. Despite the successful attempts at yarn production, the productivity achieved has never been sufficient for practical application.
The methods reported in the literature have mainly been based on the needle electrospinning system, which offers very low yields of nanofiber and nano yarn. Recently, Shuakat and Lin [30] prepared nanofiber yarns using a combination of both needle and needleless electrospinning. In this method, the authors prepared a highly tenacious yarn at a production rate of 240 m/h and a twist level up to 4700 twists per meter. Pokorny et al. [31] used alternating current (AC) electrospinning based on a needleless spinning electrode to prepare nanofiber yarn at rotation speeds ranging between 5000 and 20,000 rpm. However, fibers produced in this way were highly tortuous (inter-twined) due to the AC, in which positively and negatively charged jet segments are mutually attracted. Using a needle-free electrospinning system can increase the production rate of nanofiber yarn. In this work, we used a needle-free roller electrospinning system to prepare nanoparticle (NP)-incorporated nanofiber-covered yarns at various production rates. The main aim of this work was to prepare antibacterial nanofiber yarns at a high rate of production for possible application in wastewater cleaning. To do so, we used polyvinyl butyral (PVB) nanofibers with two different nanoparticles, i.e., copper oxide (CuO) and vanadium (V) oxide (V2O5).
PVB has been used extensively in many applications, due to its low cost, flexibility, optical clarity, and good adhesion to many surfaces [32,33]. We selected a PVB polymer to prepare nanofibers due to its non-toxic solvent system, low cost, and properties that make it conducive to electrospinning. We chose CuO and V2O5 NPs as antibacterial agents for the prepared nanofiber-covered yarn. CuO has been known for centuries as a bacteriostatic inorganic compound. Moreover, the low cost of CuO increases its applicability as an antibacterial material. CuO nanoparticles exhibit long-lasting antibacterial activity and better stability than macro-sized CuO [34]. In addition to its antibacterial activity, CuO is a semiconducting material with optical, magnetic, and electrical properties [35]. V2O5 NPs have begun to be used in a variety of fields, including gas sensors [36], batteries [37], solar cells [38], microelectronics [39], and optoelectronic devices [40], and have been proven to be bactericidal agents [41].
In this study, we selected Gram-negative Escherichia coli (E. coli) to test the antibacterial properties of the above materials. E. coli is one of the most frequently used bacterial indicators in the measurement of the quality of drinking and untreated water. The presence of E. coli bacteria indicates the potential presence of pathogenic microorganisms in natural and treated waters [42]. E. coli itself has been determined to be pathogenic, causing either intestinal (e.g., diarrhea) or extraintestinal (e.g., urinary tract) infections [43].
To the best of our knowledge, this study represents the first use of a semi-industrial-scale needle-free electrospinning device to prepare antibacterial nanocomposites with high-speed productivity. In addition, this is the first time the antibacterial efficiencies of CuO and V2O5 nanoparticles have been compared. We investigated the quantity of NPs and the production speed of the yarn’s antibacterial activity. Unlike earlier results reported in the literature, we compared the antibacterial performances of the CuO and V2O2 nanoparticles and produced the nanofiber yarns at high speed. In light of the need to improve the functionality of nanofibers, we found NP-loaded nanofiber-covered yarns to show great promise and potential in various applications, such as water filtration.

2. Results and Discussion

2.1. Surface Morphology

Figure 1 and Figure 2 show scanning electron microscopy (SEM) images of the surface morphologies of the fibers.
These SEM images indicate that the speed of the yarn influenced the morphology of the nanofibers, whereby we can see that the lowest speed of the PVB + V2O5 sample resulted in a bundle structure (Figure 1a). When the speed was increased, fewer fibers were collected, and a less compact structure was formed (Figure 1c). The same result was observed for the PVB + CuO samples (Figure 2a,e). At the highest speed, a more open structure was formed, which indicates the presence of fewer nanofibers and nanoparticles.
The PVB + V2O5 nanofibers were observed to have a sticky and bundled fiber form. The quality of nanofibers is generally related to their concentration, surface tension, conductivity, and the viscosity of the solution. In this work, we kept the solution concentration of PVB + V2O5 the same, and changed only the speed of the collector yarn. In previous research, a bundle form for the PVB nanofibers has been observed when both the solution concentration and throughput were high [44]. When the speed of the collector yarn is high, fewer fibers are collected on the surface, so a smaller bundle structure occurs.
Bead structures were observed on the PVB + CuO nanofibers. We suppose that adding CuO increases the conductivity of the PVB solution. As a result, a greater charge can be affected by the electrospinning jet, which can then affect the fiber morphology. A similar result was reported by Demir et al. [45], who found that by increasing the concentration of the magnetic nanoparticles in a poly(e-caprolactone) (PCL) solution from a 1:25 to a 32:25 weight ratio, the fiber diameter changed and bead formation occurred.
Figure 3 shows that the prepared fibers were woven into a textile surface, which means that nanofiber-covered yarn can be used in wearable textiles. Moreover, using different weaving structures (such as a tight weaving structure) enables the use of these surfaces in filtration applications.

2.2. Antibacterial Test Result

Reproducibility and production speed are two important criteria in the manufacturing of materials. In this work, nanofibers were electrospun under controllable conditions, i.e., temperature and heat. The speed of the collector yarn was controlled using a take-up cylinder, for which the faster the yarn speed, the fewer fibers were collected on the surface of the yarn, as shown in Figure 1 and Figure 2. Table 1 shows the experimental results for the inhibition effect of the yarns against E. coli with time. Figure 4 shows the reduction in microorganism with time.
The sizes of bacteria are usually in the micron range for cellular membranes and in the nanometer range for pores. Metal oxides show significant antimicrobial activities when the particle size is reduced to nanometer scale, as nano-sized particles easily interact with bacterial cell surfaces and enter into the cell without any hindrance. The interaction between nanoparticles and bacteria is mostly toxic [46]. As a result, the material shows antibacterial activity. Since the antibacterial activity varies for each nanoparticle, the mechanism of each particle has not yet been fully investigated.
Padmavathy et al. [47] studied the antibacterial activity of zinc oxide (ZnO) with various particle sizes. The authors found that the bacterial efficacy of ZnO nanoparticles increased with decreasing particle size. When the ZnO nanoparticle size decreased, it contributed to severe mechanical damage of the cell membrane and an enhanced bactericidal effect. In another work, the role of the oxidation state in the antibacterial activity of CuO NPs was investigated [48]. The antibacterial activity of CuO is associated with a sudden decrease in cell membrane integrity, the production of reactive oxygen species (ROS), and damage to the genetic material. CuO nanoparticles have been found to produce significant ROS, i.e., superoxides, which promote antibacterial activity.
V2O5 has shown excellent antibacterial activity against E. coli due to the ROS generated within the cells [41]. The toxicity of the vanadium has been found to depend on the amount used [49]. There might be two reasons for the antibacterial activity of V2O5: (1) the production of ROS and (2) the damaging effect of nanoparticles moving through the cell walls of the bacteria with which they are in contact [50].
At low yarn speed (100 m/min), more nanofibers can be collected on the surface. In previous work, researchers have proven there to be an inverse proportion between the amount of collected PVB yarn and the speed of the yarn [51,52]. Fewer nanofibers means fewer nanoparticles at the surface. Thus, the quantity of NPs/nanofiber on yarn depends on the speed of the yarn.
Figure 4 reveals that sample P0 (without any NPs) had very little effect, almost negligible, on the reduction of bacteria. At zero contact time, the PC_5_150 and PV_5_200 samples showed very low antibacterial effect, with a reduction of less than 50%. The reason for this is the fast speed of the collecting yarn, which resulted in fewer NP/nanofibers forming around the yarn and only a small number of NPs. The 10% CuO NP-loaded PVB nanofibers showed very high antibacterial efficiency for 0–1440 min contact time. The same results were observed for the PC_5_100 sample due to the low speed of the yarn, which led to the presence of more NP/nanofibers around the yarn. In one hour, the antibacterial efficiencies of the PC_10_100, PC_10_150, and PC_10_200 samples were all 99.99%. These results indicate that all samples showed excellent antibacterial activity after 1440 min contact with bacteria. As the number of colonized bacteria was at least 85% lower, we can conclude that the nanoparticles were successful in preventing bacterial adhesion at the surface of the nanofiber-covered yarn. The nanoparticles might interact with the cellular layers of the bacteria and perforate the cell wall, thus realizing antibacterial effects.
In a previous study in our research laboratory [53], we measured the stability of nanoparticles on the surface of a nanofiber web under simulated water-filtration conditions. A constant flow of water (3 L min−1 flow rate) was passed through each sample for 8 h (1440 L through each sample). Antibacterial tests (against to E. coli and Staphylococcus gallinarum) were repeated after the water filtration test to determine the stability of the antibacterial properties and the degree of fixation of the CuO particles onto the structure of the nanofibers. We observed no changes in the antibacterial efficiency.
Previously [51], we studied the antibacterial efficiency of CuO NPs immobilized in composite yarns against Gram-positive Staphylococcus gallinarum (S. gallinarum) and Gram-negative E. coli. The results indicated that the initial antibacterial efficiency of CuO against S. gallinarum is higher than that against E. coli at “0” contact time. We found CuO nanoparticles to be more effective against Gram-positive microorganisms. After 1 h of contact time, both Gram-positive and Gram-negative bacteria had been disinfected.
According to the strongly supported material characterization results, NP-loaded nanofiber-covered yarns exhibit extremely high antibacterial properties against Gram-negative E. coli bacteria. Previously [54], we found the antibacterial efficiency of CuO against E. coli to be superior to that of other NPs, such as titanium dioxide (TiO2), zinc oxide (ZnO), zirconium dioxide (ZrO2), and silver. There have been no reports in the literature comparing the antibacterial efficiencies of CuO and V2O5 nanoparticles. Based on our overall results (Figure 4 and Table 1) and support from previously reported results, we found CuO to be more effective against Gram-negative E. coli than many other NPs, including V2O5.

3. Materials and Methods

We dissolved 11 wt.% PVB, purchased from Kuraray (Mowital B60H, 60 kDa, Hattersheim am Main, Germany), in acetic acid (98%, Penta, s.r.o., Prague, Czech Republic). Then, we added 1 wt.% of the surfactant Triton-X 100 (Sigma Aldrich, Prague, Czech Republic) to the solution to prevent aggregation of the nanoparticles. The solution was then stirred overnight at room temperature. We purchased the copper oxide (CuO) nanoparticles from Penta s.r.o. (Prague, Czech Republic) and the vanadium oxide (V2O5) from Sigma Aldrich (Prague, Czech Republic). The particle size was not provided. The polymeric solution was mixed with NPs at various concentrations, as shown in Table 2, and dispersed using an ultrasonic disperser for five minutes. In the table, the nanofiber-covered yarn without any nanoparticle additive, indicated as P0, had a core yarn speed of 150 m/min. Since our nanofiber yarns show promise for use in wastewater remediation, we selected the quantity of nanoparticles based on the results of previous research related to nanofiber membranes [51,53]. Both 5 wt.% and 10 wt.% of CuO in nanofiber have been reported to show enormous antibacterial activity against Gram-positive S. gallinarum and Gram-negative E. coli [53]. In another study, 5 wt.% of V2O5 nanofiber-incorporated polyethersulfone (PES) was found to remove methylene blue dye pollutant from water [55]. We observed the surface morphologies of the electrospun fibers on an SEM (Vega 3SB, Brno, Czech Republic). We mounted the yarn samples on a stub of metal with double-sided adhesive, coated them with 7 nm of gold, and then made SEM observations at various magnifications and at various places (accelerating voltage 30 kV, beam intensity 7).

3.1. Yarn Preparation

We prepared the NP/nanofiber-covered yarn using a needle-free roller electrospinning system, in which we had modified a rotating roller electrospinning device to enable the covering of yarn with nanoparticle-embossed nanofibers. The core yarn was used as a collector, as shown in Figure 5. The roller electrode was immersed in a polymer solution tank and connected to a high-voltage source (Figure 4). When the electrostatic field overcame the surface tension, fibers formed from the surface of the roller toward the collector yarn. As the core yarn, we used a randomly textured polyester yarn (dtex 167f 36 × 1 × 3). During spinning, the nanofibers surrounded the core yarn, and we withdrew the core yarn at various speeds, i.e., 100 m/min, 150 m/min, and 200 m/min. A faster production speed required a higher speed of the collector yarn, which resulted in fewer nanofibers being collected on the surface. To prevent abrasion of the nanofibers on the surface of the textured yarn, we used a protective yarn to cover the finished yarn. The finished yarns were spooled onto a bobbin and the prepared yarns were transported to the company VÚTS a.s. (Liberec, Czech Republic) to be woven into a plain design.

3.2. Antibacterial Test

We purchased Gram-negative E. coli bacteria from the Czech Collection of Microorganisms, Masaryk University (Brno, Czech Republic) and incubated the bacteria on sterile agar in a broth agar medium from Brno (Czech Republic). To quantitatively evaluate the antibacterial activity of the samples, we used both the ASTM E 2149-01 method and the AATCC test method 100 (standard test method for determining the antibacterial activity of immobilized antibacterial agents under dynamic contact conditions). The samples were cut to weigh around 1 ± 0.01 g. We sterilized the samples in an oven at 80 °C for 60 min before conducting the tests. We also prepared a blank sample containing no antibacterial agent.
We cultivated the E. coli microorganisms in a sterilized LB broth medium and then incubated them overnight at 37 °C in a shaking incubator. The bacterial suspensions included 106 colony forming units (CFU).
After diluting the bacterial suspensions to between 102 and 103 CFU, we placed the sterilized samples into individual sterilized test tubes and inoculated them with 30 mL of the E. coli bacterial suspension. At “0” contact time (first minute of contact) and after 1 h, 2 h, 3 h, 4 h, and 24 h, we extracted 600 μL of bacterial suspension and then quickly spread it onto tryptic soy agar plates. We determined the number of viable E. coli by plating the extracted solution onto the Tryptic Soy agar plates and counting the colonies after 24 h of incubation at 37 °C [51].
Next, we used the following equation to calculate the reduction in the number of microorganisms in the test tubes with the nanofiber membranes:
R = 100 A 1 A 0 A 0 ,
where R is the percentage reduction of the test microorganism, A1 is the number of bacteria recovered from the inoculated nanofiber-covered yarn with nanoparticles in the test tube after the specified contact time, and A0 is the number of bacteria recovered from the inoculated nanofiber-covered yarn with nanoparticles in the test tube at zero contact time.

4. Conclusions

In this study, we prepared nanofiber-covered yarn using a needleless electrospinning system. We loaded the nanofiber layer with CuO and V2O5 nanoparticles to improve the antibacterial efficiency of the prepared yarn. Our experimental results indicate that there is a direct relationship between the yarn preparation speed and the antibacterial efficiency of the yarn. High-speed production yields lower nanofiber coverage on the core yarn, which results in less bacterial reduction. However, the number of NPs in the mixture is more important than the speed of the prepared yarn. Thus, we can conclude that CuO NPs showed better antibacterial efficiency than V2O5 and NP-loaded nanofiber yarn was successfully produced. Based on the efficient antibacterial activities of CuO and V2O5 nanoparticles, these yarns hold great promise for the disinfection of microorganisms under practical indoor or outdoor conditions, such as in air and water filters or in textiles. We believe that the preparation of such yarns will promote the development of more active materials for next-generation antibacterial applications.

Author Contributions

Conceptualization, F.Y.; methodology, F.Y. and M.K.; software, F.Y.; validation, F.Y., and M.K.; formal analysis, F.Y.; investigation, F.Y. and M.K.; resources, M.K.; data curation, F.Y.; writing—original draft preparation, F.Y.; writing—review and editing, F.Y.; visualization, F.Y. and M.K.; supervision, F.Y. and M.K.; project administration, F.Y. and M.K.; funding acquisition, F.Y. and M.K.

Funding

This work was supported by the Ministry of Education, Youth and Sports of the Czech Republic and the European Union - European Structural and Investment Funds in the frames of Operational Programme Research, Development and Education - project Hybrid Materials for Hierarchical Structures (HyHi, Reg. No. CZ.02.1.01/0.0/0.0/16_019/0000843).

Conflicts of Interest

The authors declare no conflict of interest.

Abbreviations

NPsNanoparticles
CuOCopper oxide
V2O5vanadium oxide
PVBPolyvinyl butyral
E. coliEscherichia coli
CFUColony forming unit
LBLysogeny broth
ROSreactive oxygen species

References

  1. Yalcinkaya, F.; Yalcinkaya, B.; Hruza, J.; Hrabak, P. Effect of nanofibrous membrane structures on the treatment of wastewater microfiltration. Sci. Adv. Mater. 2016, 9, 747–757. [Google Scholar] [CrossRef]
  2. Ma, Z.; Kotaki, M.; Ramakrishna, S. Electrospun cellulose nanofiber as affinity membrane. J. Memb. Sci. 2005, 265, 115–123. [Google Scholar]
  3. Fan, Y.; Chen, S.; Zhao, H.; Liu, Y. Distillation membrane constructed by TiO2nanofiber followed by fluorination for excellent water desalination performance. Desalination 2017, 405, 51–58. [Google Scholar] [CrossRef]
  4. Yalcinkaya, F. A review on advanced nanofiber technology for membrane distillation. J. Eng. Fiber. Fabr. 2019, 14. [Google Scholar] [CrossRef]
  5. Yalcinkaya, B.; Yalcinkaya, F.; Chaloupek, J. Optimisation of thin film composite nanofiltration membranes based on laminated nanofibrous and nonwoven supporting material. Desalin. Water Treat. 2017, 59, 19–30. [Google Scholar] [CrossRef]
  6. Yalcinkaya, B.; Yalcinkaya, F.; Chaloupek, J. Thin Film Nanofibrous composite membrane for dead-end seawater desalination. J. Nanomater. 2016, 2016, 1–12. [Google Scholar]
  7. Kadam, V.V.; Wang, L.; Padhye, R. Electrospun nanofibre materials to filter air pollutants—A review. J. Ind. Text. 2018, 47, 2253–2280. [Google Scholar]
  8. Roche, R.; Yalcinkaya, F. Incorporation of PVDF nanofibre multilayers into functional structure for filtration applications. Nanomaterials 2018, 8, 771. [Google Scholar] [CrossRef]
  9. Yusof, M.R.; Shamsudin, R.; Abdullah, Y.; Yalcinkaya, F.; Yaacob, N. Electrospinning of carboxymethyl starch/poly(L-lactide acid) composite nanofiber. Polym. Advan. Technol. 2018, 29, 1843–1851. [Google Scholar]
  10. Yalcin Enis, I.; Gok Sadikoglu, T. Design parameters for electrospun biodegradable vascular grafts. J. Ind. Text. 2016. [Google Scholar] [CrossRef]
  11. Macagnano, A.; Perri, V.; Zampetti, E.; Bearzotti, A.; De Cesare, F.; Sprovieri, F.; Pirrone, N. A smart nanofibrous material for adsorbing and detecting elemental mercury in air. Atmos. Chem. Phys. 2017, 17, 6883–6893. [Google Scholar] [CrossRef]
  12. Liu, P.; Wu, S.; Zhang, Y.; Zhang, H.; Qin, X. A Fast Response ammonia sensor based on coaxial PPy–PAN nanofiber yarn. Nanomaterials 2016, 6, 121. [Google Scholar]
  13. Gopalan, A.I.; Santhosh, P.; Manesh, K.M.; Nho, J.H.; Kim, S.H.; Hwang, C.G.; Lee, K.P. Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries. J. Memb. Sci. 2008, 325, 683–690. [Google Scholar]
  14. Aydın, H.; Çelik, S.Ü.; Bozkurt, A. Electrolyte loaded hexagonal boron nitride/polyacrylonitrile nanofibers for lithium ion battery application. Solid State Ionics 2017, 309, 71–76. [Google Scholar] [CrossRef]
  15. Döpke, C.; Grothe, T.; Steblinski, P.; Klöcker, M.; Sabantina, L.; Kosmalska, D.; Blachowicz, T.; Ehrmann, A. Magnetic nanofiber mats for data storage and transfer. Nanomaterials 2019, 9, 92. [Google Scholar] [CrossRef]
  16. Juhász Junger, I.; Wehlage, D.; Böttjer, R.; Grothe, T.; Juhász, L.; Grassmann, C.; Blachowicz, T.; Ehrmann, A. Dye-sensitized solar cells with electrospun nanofiber mat-based counter electrodes. Materials 2018, 11, 1604. [Google Scholar] [CrossRef]
  17. Grothe, T.; Sabantina, L.; Klöcker, M.; Junger, I.; Döpke, C.; Ehrmann, A. Wet relaxation of electrospun nanofiber mats. Technologies 2019, 7, 23. [Google Scholar]
  18. Yalcinkaya, F. Preparation of various nanofiber layers using wire electrospinning system. Arab. J. Chem. 2016. [Google Scholar] [CrossRef]
  19. Turky, A.O.; Barhoum, A.; MohamedRashad, M.; Bechlany, M. Enhanced the structure and optical properties for ZnO/PVP nanofibers fabricated via electrospinning technique. J. Mater. Sci. Mater. Electron. 2017, 28, 17526–17532. [Google Scholar] [CrossRef]
  20. Jahanbaani, A.R.; Behzad, T.; Borhani, S.; Darvanjooghi, M.H.K. Electrospinning of cellulose nanofibers mat for laminated epoxy composite production. Fiber. Polym. 2016, 17, 1438–1448. [Google Scholar]
  21. Yalcinkaya, F.; Hruza, J. Effect of Laminating pressure on polymeric multilayer nanofibrous membranes for liquid filtration. Nanomaterials 2018, 8, 272. [Google Scholar]
  22. Charles, L.F.; Shaw, M.T.; Olson, J.R.; Wei, M. Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure. J. Mater. Sci. Mater. Med. 2010, 21, 1845–1854. [Google Scholar] [CrossRef] [PubMed]
  23. Wirth, E.; Sabantina, L.; Weber, M.; Finsterbusch, K.; Ehrmann, A. Preliminary study of ultrasonic welding as a joining process for electrospun nanofiber mats. Nanomaterials 2018, 8, 746. [Google Scholar] [CrossRef] [PubMed]
  24. Wang, X.; Zhang, K.; Zhu, M.; Yu, H.; Zhou, Z.; Chen, Y.; Hsiao, B.S. Continuous polymer nanofiber yarns prepared by self-bundling electrospinning method. Polymer 2008, 49, 2755–2761. [Google Scholar]
  25. Khil, M.S.; Bhattarai, S.R.; Kim, H.Y.; Kim, S.Z.; Lee, K.H. Novel fabricated matrix via electrospinning for tissue engineering. J. Biomed. Mater. Res. B 2005, 72, 117–124. [Google Scholar] [CrossRef] [PubMed]
  26. Smit, E.; Buttner, U.; Sanderson, R.D. Continuous yarns from electrospun fibers. Polymer 2005, 46, 2419–2423. [Google Scholar] [CrossRef]
  27. Teo, W.E.; Gopal, R.; Ramaseshan, R.; Fujihara, K.; Ramakrishna, S. A dynamic liquid support system for continuous electrospun yarn fabrication. Polymer 2007, 48, 3400–3405. [Google Scholar]
  28. Jin, S.; Xin, B.; Zheng, Y.; Liu, S. Effect of electric field on the directly electrospun nanofiber yarns: Simulation and experimental study. Fiber. Polym. 2018, 19, 116–124. [Google Scholar] [CrossRef]
  29. Levitt, A.S.; Vallett, R.; Dion, G.; Schauer, C.L. Effect of electrospinning processing variables on polyacrylonitrile nanoyarns. J. Appl. Polym. Sci. 2018, 135, 46404. [Google Scholar] [CrossRef]
  30. Shuakat, M.N.; Lin, T. Highly-twisted, continuous nanofibre yarns prepared by a hybrid needle-needleless electrospinning technique. RSC Adv. 2015, 5, 33930–33937. [Google Scholar]
  31. Pokorny, P.; Kostakova, E.; Sanetrnik, F.; Mikes, P.; Chvojka, J.; Kalous, T.; Bilek, M.; Pejchar, K.; Valtera, J.; Lukas, D. Effective AC needleless and collectorless electrospinning for yarn production. Phys. Chem. Chem. Phys. 2014, 16, 26816–26822. [Google Scholar] [CrossRef] [PubMed]
  32. Yener, F.; Jirsak, O.; Gemci, R. Using a range of PVB spinning solution to acquire diverse morphology for electrospun nanofibres. Iran. J. Chem. Chem. Eng. 2012, 31, 49–58. [Google Scholar]
  33. Yener, F.; Yalcinkaya, B. Electrospinning of polyvinyl butyral in different solvents. E-Polymers 2013, 13, 229–242. [Google Scholar] [CrossRef]
  34. Xu, X.; Shen, J.; Qin, J.; Duan, H.; He, G.; Chen, H. Cytotoxicity of bacteriostatic reduced graphene oxide-based copper oxide nanocomposites. JOM 2019, 71, 294–301. [Google Scholar]
  35. Khatoon, U.T.; Mohan Mantravadi, K.; Nageswara Rao, G.V.S. Strategies to synthesise copper oxide nanoparticles and their bio applications–a review. Mater. Sci. Technol. 2018, 34, 2214–2222. [Google Scholar] [CrossRef]
  36. Dhayal Raj, A.; Pazhanivel, T.; Suresh Kumar, P.; Mangalaraj, D.; Nataraj, D.; Ponpandian, N. Self assembled V2O5 nanorods for gas sensors. Curr. Appl. Phys. 2010, 10, 531–537. [Google Scholar]
  37. Pan, A.; Zhang, J.G.; Nie, Z.; Cao, G.; Arey, B.W.; Li, G.; Liang, S.Q.; Liu, J. Facile synthesized nanorod structured vanadium pentoxide for high-rate lithium batteries. J. Mater. Chem. 2010, 20, 9193–9199. [Google Scholar] [CrossRef]
  38. Elbohy, H.; Thapa, A.; Poudel, P.; Adhikary, N.; Venkatesan, S.; Qiao, Q. Vanadium oxide as new charge recombination blocking layer for high efficiency dye-sensitized solar cells. Nano Energy 2015, 13, 368–375. [Google Scholar] [CrossRef]
  39. Ottaviano, L.; Pennisi, A.; Simone, F.; Salvi, A.M. RF sputtered electrochromic V2O5 films. Opt. Mater. 2004, 27, 307–313. [Google Scholar] [CrossRef]
  40. Pan, K.-Y.; Wei, D.-H. Optoelectronic and electrochemical properties of vanadium pentoxide nanowires synthesized by vapor-solid process. Nanomaterials 2016, 6, 140. [Google Scholar] [CrossRef]
  41. Raj, S.; Kumar, S.; Chatterjee, K. Facile synthesis of vanadia nanoparticles and assessment of antibacterial activity and cytotoxicity. Mater. Technol. 2016, 31, 562–573. [Google Scholar] [CrossRef]
  42. Coliform Bacteria in Drinking Water Supplies. Available online: https://www.health.ny.gov/environmental/water/drinking/coliform_bacteria.htm (accessed on 29 July 2019).
  43. Kaper, J.B. Pathogenic Escherichia coli. Int. J. Med. Microbiol. 2005, 295, 355–356. [Google Scholar] [CrossRef] [PubMed]
  44. Yener, F.; Jirsak, O. Comparison between the needle and roller electrospinning of polyvinylbutyral. J. Nanomater. 2012, 2012, 1–6. [Google Scholar] [CrossRef]
  45. Demir, D.; Güreş, D.; Tecim, T.; Genç, R.; Bölgen, N. Magnetic nanoparticle-loaded electrospun poly(ε-caprolactone) nanofibers for drug delivery applications. Appl. Nanosci. 2018, 8, 1461–1469. [Google Scholar] [CrossRef]
  46. Seil, J.T.; Webster, T.J. Antimicrobial applications of nanotechnology: Methods and literature. Int. J. Nanomed. 2012, 7, 2767–2781. [Google Scholar]
  47. Padmavathy, N.; Vijayaraghavan, R. Enhanced bioactivity of ZnO nanoparticles—An antimicrobial study. Sci. Technol. Adv. Mater. 2008, 9, 035004. [Google Scholar] [CrossRef] [PubMed]
  48. Meghana, S.; Kabra, P.; Chakraborty, S.; Padmavathy, N. Understanding the pathway of antibacterial activity of copper oxide nanoparticles. RSC Adv. 2015, 5, 12293–12299. [Google Scholar] [CrossRef]
  49. Crans, D.C.; Smee, J.J.; Gaidamauskas, E.; Yang, L. The chemistry and biochemistry of vanadium and the biological activities exerted by vanadium compounds. Chem. Rev. 2004, 104, 849–902. [Google Scholar] [CrossRef] [PubMed]
  50. Jayaraj, S.K.; Sadishkumar, V.; Arun, T.; Thangadurai, P. Enhanced photocatalytic activity of V2O5 nanorods for the photodegradation of organic dyes: A detailed understanding of the mechanism and their antibacterial activity. Mater. Sci. Semicond. Process. 2018, 85, 122–133. [Google Scholar] [CrossRef]
  51. Yalcinkaya, F.; Komarek, M.; Lubasova, D.; Sanetrnik, F.; Maryska, J. Preparation of Antibacterial nanofibre/nanoparticle covered composite yarns. J. Nanomater. 2016, 2016, 1–7. [Google Scholar] [CrossRef]
  52. Yalcinkaya, F.; Komarek, M.; Lubasova, D.; Sanetrnik, F.; Maryska, J. Producing antibacterial textile material by weaving PVB/CuO nanocomposite fiber covered yarn. Nanocon 2014, 6th International Conference 2015. Available online: http://nanocon2014.tanger.cz/en/view-list-of-papers/3255-producing-antibacterial-textile-material-by-weaving-pvb-cuo-nanocomposite-fiber-covered-yarn/ (accessed on 1 May 2019).
  53. Ungur, G.; Hrůza, J. Modified polyurethane nanofibers as antibacterial filters for air and water purification. RSC Adv. 2017, 7, 49177–49187. [Google Scholar] [CrossRef] [Green Version]
  54. Yalcinkaya, F.; Lubasova, D. Quantitative evaluation of antibacterial activities of nanoparticles (ZnO, TiO2, ZnO/TiO2, SnO2, CuO, ZrO2, and AgNO3) incorporated into polyvinyl butyral nanofibers. Polym. Adv. Technol. 2017, 28, 137–140. [Google Scholar] [CrossRef]
  55. Homaeigohar, S.; Zillohu, A.U.; Abdelaziz, R.; Hedayati, M.K.; Elbahri, M. A Novel nanohybrid nanofibrous adsorbent for water purification from dye pollutants. Materials (Basel) 2016, 9, 848. [Google Scholar] [CrossRef]
Figure 1. SEM (scanning electron microscopy) images of (a) PV_5_100, (b) PV_5_150, and (c) PV_5_200. Nanoparticles are indicated in the circles.
Figure 1. SEM (scanning electron microscopy) images of (a) PV_5_100, (b) PV_5_150, and (c) PV_5_200. Nanoparticles are indicated in the circles.
Ijms 20 04317 g001
Figure 2. SEM images of (a) PC_5_100, (b) PC_10_100, (c) PC_5_150, (d) PC_10_150, and (e) PC_5_200. Nanoparticles are indicated in the circles.
Figure 2. SEM images of (a) PC_5_100, (b) PC_10_100, (c) PC_5_150, (d) PC_10_150, and (e) PC_5_200. Nanoparticles are indicated in the circles.
Ijms 20 04317 g002
Figure 3. Fabrication of nanofiber-covered yarn: (A) nanofiber/NP-covered yarn, (B) woven fabric.
Figure 3. Fabrication of nanofiber-covered yarn: (A) nanofiber/NP-covered yarn, (B) woven fabric.
Ijms 20 04317 g003
Figure 4. Reduction in bacteria (Escherichia coli) over time.
Figure 4. Reduction in bacteria (Escherichia coli) over time.
Ijms 20 04317 g004
Figure 5. Diagram of a nanofiber-covered-yarn production device. (A): Textured core yarn, (B): roller electrospinning system, (C): collector, (D): application of protective yarn(s), (E): Twisting of protective yarn, and (F): take-up mechanism.
Figure 5. Diagram of a nanofiber-covered-yarn production device. (A): Textured core yarn, (B): roller electrospinning system, (C): collector, (D): application of protective yarn(s), (E): Twisting of protective yarn, and (F): take-up mechanism.
Ijms 20 04317 g005
Table 1. Inhibition effect of the nanofiber/NPs-coated yarn in time.
Table 1. Inhibition effect of the nanofiber/NPs-coated yarn in time.
Sample%Reduction of E. coli in Time
0 Contact Time1 h2 h3 h4 h24 h
P00%6.66%23.52%29.01%23.33%17.19%
PC_5_10074.67%90.67%95.56%99.21%96.58%100.00%
PV_5_10072.00%14.67%25.93%52.63%55.26%97.37%
PC_10_10089.00%100.00%100.00%100.00%100.00%100.00%
PC_5_15044.67%1.33%3.70%5.26%42.11%94.21%
PV_5_15066.67%20.00%12.96%53.95%65.79%95.53%
PC_10_15081.33%100.00%100.00%100.00%100.00%100.00%
PV_5_20040.00%53.33%37.04%52.63%44.74%91.84%
PC_10_20084.67%100.00%100.00%100.00%100.00%100.00%
Table 2. Nanofiber/nanoparticle-covered samples.
Table 2. Nanofiber/nanoparticle-covered samples.
SolutionNanoparticles (wt.%)Speed of Core Yarn (m/min)Abbreviation
11% PVB dissolved in acetic acid5% CuO100 ± 15PC_5_100
5% V2O5PV_5_100
10% CuOPC_10_100
5% CuO150 ± 15PC_5_150
5% V2O5PV_5_150
10% CuOPC_10_150
5% V2O5200 ± 15PV_5_200
10% CuOPC_10_200

Share and Cite

MDPI and ACS Style

Yalcinkaya, F.; Komarek, M. Polyvinyl Butyral (PVB) Nanofiber/Nanoparticle-Covered Yarns for Antibacterial Textile Surfaces. Int. J. Mol. Sci. 2019, 20, 4317. https://0-doi-org.brum.beds.ac.uk/10.3390/ijms20174317

AMA Style

Yalcinkaya F, Komarek M. Polyvinyl Butyral (PVB) Nanofiber/Nanoparticle-Covered Yarns for Antibacterial Textile Surfaces. International Journal of Molecular Sciences. 2019; 20(17):4317. https://0-doi-org.brum.beds.ac.uk/10.3390/ijms20174317

Chicago/Turabian Style

Yalcinkaya, Fatma, and Michal Komarek. 2019. "Polyvinyl Butyral (PVB) Nanofiber/Nanoparticle-Covered Yarns for Antibacterial Textile Surfaces" International Journal of Molecular Sciences 20, no. 17: 4317. https://0-doi-org.brum.beds.ac.uk/10.3390/ijms20174317

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop