Next Article in Journal
A Novel Intra-body Sensor for Vaginal Temperature Monitoring
Next Article in Special Issue
Building Facade Reconstruction by Fusing Terrestrial Laser Points and Images
Previous Article in Journal
Adapting Mobile Beacon-Assisted Localization in Wireless Sensor Networks
Previous Article in Special Issue
Automatic Registration of Terrestrial Laser Scanning Point Clouds using Panoramic Reflectance Images
Article

Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data

Department of Remote Sensing and Photogrammetry, Finnish Geodetic Institute, Geodeetinrinne 2, 02431 Masala, Finland
*
Author to whom correspondence should be addressed.
Received: 9 March 2009 / Revised: 31 March 2009 / Accepted: 20 April 2009 / Published: 20 April 2009
(This article belongs to the Special Issue LiDAR for 3D City Modeling)
We have studied the possibility of calibrating airborne laser scanning (ALS) intensity data, using land targets typically available in urban areas. For this purpose, a test area around Espoonlahti Harbor, Espoo, Finland, for which a long time series of ALS campaigns is available, was selected. Different target samples (beach sand, concrete, asphalt, different types of gravel) were collected and measured in the laboratory. Using tarps, which have certain backscattering properties, the natural samples were calibrated and studied, taking into account the atmospheric effect, incidence angle and flying height. Using data from different flights and altitudes, a time series for the natural samples was generated. Studying the stability of the samples, we could obtain information on the most ideal types of natural targets for ALS radiometric calibration. Using the selected natural samples as reference, the ALS points of typical land targets were calibrated again and examined. Results showed the need for more accurate ground reference data, before using natural samples in ALS intensity data calibration. Also, the NIR camera-based field system was used for collecting ground reference data. This system proved to be a good means for collecting in situ reference data, especially for targets with inhomogeneous surface reflection properties. View Full-Text
Keywords: Intensity; laser scanning; natural samples; radiometric calibration; reflectance Intensity; laser scanning; natural samples; radiometric calibration; reflectance
Show Figures

MDPI and ACS Style

Vain, A.; Kaasalainen, S.; Pyysalo, U.; Krooks, A.; Litkey, P. Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data. Sensors 2009, 9, 2780-2796. https://0-doi-org.brum.beds.ac.uk/10.3390/s90402780

AMA Style

Vain A, Kaasalainen S, Pyysalo U, Krooks A, Litkey P. Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data. Sensors. 2009; 9(4):2780-2796. https://0-doi-org.brum.beds.ac.uk/10.3390/s90402780

Chicago/Turabian Style

Vain, Ants, Sanna Kaasalainen, Ulla Pyysalo, Anssi Krooks, and Paula Litkey. 2009. "Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data" Sensors 9, no. 4: 2780-2796. https://0-doi-org.brum.beds.ac.uk/10.3390/s90402780

Find Other Styles

Article Access Map by Country/Region

1
Only visits after 24 November 2015 are recorded.
Back to TopTop