Next Article in Journal
Life Course Effects of Socioeconomic and Lifestyle Factors on Metabolic Syndrome and 10-Year Risk of Cardiovascular Disease: A Longitudinal Study in Taiwan Adults
Next Article in Special Issue
Traffic-Related Air Pollution and Child BMI—A Study of Prenatal Exposure to Nitrogen Oxides and Body Mass Index in Children at the Age of Four Years in Malmö, Sweden
Previous Article in Journal
Identification of Safety-Related Opinion Leaders among Construction Workers: Evidence from Scaffolders of Metro Construction in Wuhan, China
Previous Article in Special Issue
Relationship of Time-Activity-Adjusted Particle Number Concentration with Blood Pressure
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Fine-Scale Source Apportionment Including Diesel-Related Elemental and Organic Constituents of PM2.5 across Downtown Pittsburgh

1
University of Pittsburgh Graduate School of Public Health, Department of Environmental and Occupational Health, Pittsburgh, PA 15219, USA
2
Drexel University Dornsife School of Public Health, Department of Environmental and Occupational Health, Philadelphia, PA 15219, USA
*
Author to whom correspondence should be addressed.
Int. J. Environ. Res. Public Health 2018, 15(10), 2177; https://0-doi-org.brum.beds.ac.uk/10.3390/ijerph15102177
Submission received: 23 August 2018 / Revised: 21 September 2018 / Accepted: 27 September 2018 / Published: 5 October 2018
(This article belongs to the Special Issue Transportation-Related Air Pollution and Human Health)

Abstract

:
Health effects of fine particulate matter (PM2.5) may vary by composition, and the characterization of constituents may help to identify key PM2.5 sources, such as diesel, distributed across an urban area. The composition of diesel particulate matter (DPM) is complicated, and elemental and organic carbon are often used as surrogates. Examining multiple elemental and organic constituents across urban sites, however, may better capture variation in diesel-related impacts, and help to more clearly separate diesel from other sources. We designed a “super-saturation” monitoring campaign of 36 sites to capture spatial variance in PM2.5 and elemental and organic constituents across the downtown Pittsburgh core (~2.8 km2). Elemental composition was assessed via inductively-coupled plasma mass spectrometry (ICP-MS), organic and elemental carbon via thermal-optical reflectance, and organic compounds via thermal desorption gas-chromatography mass-spectrometry (TD-GCMS). Factor analysis was performed including all constituents—both stratified by, and merged across, seasons. Spatial patterning in the resultant factors was examined using land use regression (LUR) modelling to corroborate factor interpretations. We identified diesel-related factors in both seasons; for winter, we identified a five-factor solution, describing a bus and truck-related factor [black carbon (BC), fluoranthene, nitrogen dioxide (NO2), pyrene, total carbon] and a fuel oil combustion factor (nickel, vanadium). For summer, we identified a nine-factor solution, which included a bus-related factor (benzo[ghi]fluoranthene, chromium, chrysene, fluoranthene, manganese, pyrene, total carbon, total elemental carbon, zinc) and a truck-related factor (benz[a]anthracene, BC, hopanes, NO2, total PAHs, total steranes). Geographic information system (GIS)-based emissions source covariates identified via LUR modelling roughly corroborated factor interpretations.

1. Introduction

Diesel particulate matter (DPM) has been classified as a probable human carcinogen by the United States Environmental Protection Agency (U.S. EPA), [1,2,3,4] and has been associated with lung injury and respiratory health [4], cardiovascular illness, birth outcomes [5], cognitive effects [6,7], blood-brain barrier integrity [8], endocrine disruption [9], and other health outcomes, in epidemiologic and controlled-dose studies in both humans [10,11,12] and animals [13,14,15,16]. In addition, recent evidence indicates that diesel emissions may be a major contributing factor to climate change [17]. By more clearly identifying the air pollution impact of diesel sources in urban areas, researchers can more accurately evaluate diesel-related health effects, and interventions may be more effectively targeted towards reducing population exposures and improving urban health.
The contribution of DPM to local fine particulate matter (PM2.5) and health can be challenging to isolate using standard sampling instrumentation or analytic techniques [18]. This challenge is due, in part, to the complexity of PM2.5—a composite of elemental and organic constituents which varies in composition both between and within urban areas. There is substantial spatial variation in diesel source densities, and variation by time of day, owing both to differences in source density (e.g., rush hours) and meteorology as relates to dispersion, mixing height, and transformation to secondary species. As regulatory and technological changes have led to changes in diesel emissions over recent years, isolating the diesel-attributable portion of urban air pollution is profoundly complex. As a result, there remain substantial uncertainties in evaluating the emissions-reduction potential of policies aimed at reducing diesel-pollution exposures in urban areas, hindering policy development and related cost-benefit analyses.
Lacking strong indicators of ambient DPM, organic carbon (OC) and elemental carbon (EC) are often used as imperfect exposure surrogates, because DPM is approximately 80% carbon [19,20,21]. Factor analytic source apportionment analysis, however, which identifies highly-correlated suites of constituents and pollutants [22,23] can enable identification and analysis of source-specific PM2.5 with adverse health outcomes [24].
Land use regression (LUR) modeling—which quantifies spatial associations between geographic information system (GIS)-based source density indicators and measured concentrations—can identify key sources spatially associated with specific constituents or constituent suites (e.g., factor scores) [22]. In this way, LUR models can be used in combination with traditional factor analytic source apportionment methods, corroborating the interpretation of derived factors [25].
We previously reported that bus density explained substantial spatial variation in PM2.5, BC, EC, OC, and various other organic and elemental constituents [26] across the downtown Pittsburgh core. Here, we merge factor analysis and LUR methods to identify elemental and organic components spatially correlated with variation in diesel-related sources across a downtown area. To do so, we assessed a suite of elemental and organic constituents, including polycyclic aromatic hydrocarbons (PAHs), hopanes, and steranes, and implemented factor analyses including both elemental and organic constituents of PM2.5 separately for winter and summer, and merged across seasons. We hypothesized: (1) that we would observe distinct factors (spatially-correlated suites of constituents) with substantial loadings of constituents previously associated with diesel-related sources in the literature, and (2) that spatial variability in factors could be predicted using GIS-based source terms and LUR modeling methods.

2. Materials and Methods

2.1. Study Design

Monitoring and data collection methods are detailed in two prior manuscripts from this study [26,27]. Briefly, we aimed to: (1) capture spatial variability in various traffic-related sources (esp., diesel emissions), and (2) to use highly-resolved GIS-based indicators (e.g., total traffic density, total truck density, bus route frequency) to distinguish several types of diesel emissions from other urban sources. We did so by allocating 36 sampling sites across a small (2.8 km2) domain in downtown Pittsburgh, to capture source-driven variation in three GIS-based indicators of local pollution: vehicular traffic, truck traffic, and bus route frequency. These three source parameters were developed using GIS, based on Pennsylvania Department of Transportation (PennDOT) Annualized Average Daily Traffic counts and Google transit bus routes to derive three kernel-weighted density surfaces. Each category was dichotomized at the median, and cross-stratified to create eight sampling classes (e.g., high diesel/ high truck/low bus density, etc.), and a comparable number of sampling sites were randomly selected from each class, while ensuring spatial coverage across the downtown area.
At each site, during one randomly-selected week in each sampling season, programmable monitors were used to collect integrated samples of PM2.5 and constituents using Harvard Impactors (HIs) (Air Diagnostics and Engineering, Inc., Harrison, ME, USA) with 37-mm Teflon™ filters (PTFE membrane, 2-µm pores, Pall Life Sciences) housed in weather tight Pelican boxes.
In separate Pelican boxes, organic compounds were collected using cyclone-adapted HIs (Air Diagnostics and Engineering, Inc.) with pre-baked 37-mm quartz fiber filters (Pallflex Tissuquartz non-heat-treated filters, Pall Life Sciences). Prior to deployment, quartz fiber filters were placed into porcelain dishes using Teflon-coated tweezers and baked for four hours at 900 °C (Thermo Scientific Thermolyne oven, Waltham, MA, USA) to remove trace organics. During retrieval, the quartz filters were removed from the cyclone-adapted HI, enclosed in a petri dish, placed inside an insulated box with ice packs, and covered in foil to prevent light exposure. Quartz filters were stored in foil-wrapped petri dishes at −20 °C, until shipped overnight on ice for analysis.
All particle samplers (using either Teflon or quartz filters) were programmed using a chrontroller (ChronTrol Corporation, San Diego, CA, USA), which turned the monitor’s pump on for a selected subset of hours during the week (Monday through Friday, 7 a.m. to 7 p.m.), simultaneously across all 36 distributed monitoring locations. Battery-operated vacuum pumps (SKC, Inc., Eighty-Four, PA, USA) were calibrated to 4.0 L/min. Flow rates were temperature-adjusted based on weather forecasts prior to each deployment.
Winter sampling was performed from 14 January to 3 March, and summer sampling from 10 June to 2 August 2013. Four reference sites (one upwind site and three sites within the sampling domain) were monitored during every sampling session to temporally-adjust samples collected across different weeks. Each sample from the 36 distributed sites was temporally-adjusted by dividing the observed concentration by the mean concentration from the four reference sites during that week, then multiplying the result by the mean concentration from the four reference sites for the entire sampling season. We thereby estimated the expected seasonal average concentration at each distributed sampling site, enabling direct comparisons across sampling locations. These temporal adjustment methods are further detailed in Tunno et al. 2018 and Shmool et al. 2014 [26,28].

2.2. Tracer Selection

Based on our previously-published literature review of elemental source tracers [25], only 3 elemental constituents [aluminum (Al), calcium (Ca), and iron (Fe)] were identified in diesel emissions in two or more studies. However, to provide source contrast for factor analysis, we also examined elemental constituents associated with other urban emission sources relevant to spatial variation in pollution across our region (e.g., gasoline emissions, non-tailpipe vehicular emissions, industrial emissions related to steel-making and coal, fuel oil burning). The literature review identified the following tracers for vehicular tailpipe and non-tailpipe emissions: black carbon (BC), Ca, Fe, zinc (Zn) (motor vehicles); barium (Ba), copper (Cu), Fe, molybdenum (Mo), antimony (Sb), strontium (Sr), Zn (brake/ tire wear); Al, Ca, Fe (soil/ road dust resuspension); and BC, Al, Ca, Fe (diesel emissions). Constituents associated with long-range transport of pollution into our region included arsenic (As), nickel (Ni), selenium (Se); these species, along with sulfur (S), are commonly associated with coal combustion/coal-burning power plants. The Pittsburgh area, however, contains one of the country’s largest coke works, complicating the interpretation of this tracer in our study area. Fe, manganese (Mn), lead (Pb), and Zn have been associated with steel manufacturing. Nickel (Ni) and vanadium (V) have been associated with residual fuel oil/heating oil combustion.
To select organic markers, given the relatively greater instability of these compounds, we considered additional criteria, ensuring that each was: (1) previously identified, in the published literature, as a marker of diesel exhaust, (2) quantifiable using thermal desorption gas-chromatography mass-spectrometry (TD-GC-MS) or other GC-MS method, and (3) had relatively lower volatility and reactivity, in comparison to other diesel exhaust components (e.g., four or more aromatic rings, higher molecular weight) [29,30,31,32,33,34,35]. Our final list included nine PAHs (benz[a]anthracene, benzo[a]pyrene, benzo[e]pyrene, benzo[ghi]fluoranthene, benzo[ghi]perylene, chrysene, fluoranthene, indeno[123-cd]pyrene, and pyrene), hopanes (homohopane, hopane, norhopane, trisnorhopane), and steranes (cholestanes). A few more reactive compounds previously associated with diesel (i.e., pyrene, benz[a]anthracene, and benzo[ghi]perylene) were also retained for source apportionment.
Finally, several gases normally used as tracers for vehicular emissions were measured, as described in the next section—including nitrogen dioxide (NO2) and volatile organic compounds (VOCs) [i.e., benzene (BENZ), toluene (TOL)].

2.3. Sample Analysis

To determine PM2.5 concentrations, Teflon™ filters were pre- and post-weighed using an ultramicrobalance (Mettler Toledo Model XP2U, Columbus, OH, USA ) inside a temperature and relative humidity-controlled glove box (PlasLabs Model 890 THC, Lansing, MI, USA). Black carbon (BC) was estimated using an EEL43M Smokestain Reflectometer (Diffusion Systems Limited, London, England) [36] and reported in absorbance units (abs) [37].
For elemental composition, inductively-coupled plasma mass spectrometry (ICP-MS) analyses were conducted on all Teflon filters used to collect PM2.5, by the Wisconsin State Laboratory of Hygiene following documented protocols (ESS INO Method 400.4; U.S. EPA Method 1638) [38]. Using ICP-MS, every filter was analyzed for 25 elements: Al, As, Ba, Ca, Cd, Ce, Cr, Cu, Cs, Fe, K, La, Mg, Mn, Mo, Ni, P, Pb, S, Sb, Se, Sr, Tl, V and Zn.
For OC and EC, thermal-optical reflectance on all quartz filters was performed at Desert Research Institute (DRI, Reno, NV, USA) [39]. Total carbon was calculated as the sum of total EC and total OC. Thermal desorption gas-chromatography mass-spectrometry (TD-GC-MS) was conducted by DRI [40] for all selected organic compounds, including polycyclic aromatic hydrocarbons (PAHs) [benz[a]anthracene (BAA), benzo[a]pyrene (BAP), benzo[e]pyrene (BEP), benzo[ghi]fluoranthene (BGHIF), benzo[ghi]perylene (BGHIP), chrysene (CHRYS), fluoranthene (FLRT), indeno[123-cd]pyrene (IP), and pyrene (PYR)], hopanes (homohopane (HOP9_10), hopanes (HOP6_7_8), norhopane (HOP3_4_5), trisnorhopane (HOP1_2), and steranes (four cholestanes). We also created a “total PAHs” indicator by summing the nine PAHs, and similar “total hopanes” and “total steranes” indicators.
Gases which were monitored using Ogawa passive badges (i.e., NO2), were analyzed using water-based extraction and spectrophotometry [41] (Thermo Scientific Evolution 60S UV-Visible Spectrophotometer, Waltham, MA, USA) for nitrogen dioxide (NO2) concentrations (ppb). Shelters and Radiello passive diffusive badges (Eurofins Air Toxics, Inc.) (Folsom, CA, USA) were used to collect and determine benzene (BENZ) and toluene (TOL) concentrations (µg/m3) [42].

2.4. Source Apportionment

Following the methods previously outlined in Clougherty et al. 2009 and Tunno et al. 2015, we performed a two-stage analysis wherein we: (1) use unconstrained factor analysis to identify groupings of spatially-correlated constituents, and (2) derive factor scores for each location, which are then mapped across the study area and modeled using LUR, to identify key sources that explain variance in concentrations.
We first performed season-specific unconstrained factor analysis on temporally-adjusted elemental and organic concentrations, to derive factors representing latent emissions source groupings. Second, we performed a merged (two-season) factor analysis including all 72 samples from the 36 sites. Every factor analysis included data from all 36 monitoring locations, and all 48 pollutants (25 elemental constituents, nine PAHs, four specific hopanes, total hopanes, total steranes, total PAHs, total carbon, total EC, total OC, NO2, BC, benzene, toluene).
To select an optimal number of factors, we considered eigenvalue-one criterion and scree plots, and retained factors explaining at least 2% of total variance. Constituents loading greater than or equal to 0.60 were included on each factor. The factor solution was sensitivity-tested using constituent loading cut-points of 0.50 and 0.70 to identify changes in groups, and to interpret factors. Summary factor scores were calculated for each factor, for each distributed monitoring location, each season, as well as merged across seasons. We used the U.S. EPA’s Positive Matrix Factorization (PMF) model version 5.0 as a sensitivity-test, to corroborate the observed factor solution [43].
Using LUR methods and sensitivity analyses detailed in Clougherty et al. 2013 [44] and Tunno et al. 2015 [45], we modeled factor scores as a function of GIS-based local emissions source indicators (Table 1). Separate LUR models for each factor were implemented using manual forward step-wise linear regression, separately for each sampling season, then in a merged-seasons model. Final LUR models for each factor retained only source covariates significant at p < 0.05, which increased R2 by at least 0.02, and which produced a variance inflation factor (VIF) of less than 1.
Finally, elemental and organic constituents loading strongly onto each factor were compared to the literature review, to identify potential sources. Source covariates identified as significant in the LUR for each factor were compared to the literature-based assessment, to corroborate these factor interpretations.
Factor analyses were performed using PROC FACTOR, and LUR modeling was performed using PROC MIXED, in SAS v. 9.3 (Cary, NC, USA). R statistical software v.3.1.2 (R Foundation for Statistical Computing, Vienna, Austria) was used to produce factor loading plots.

3. Results

3.1. Factor Analysis/Source Apportionment

We identified a five-factor solution for winter (n = 36) and a nine-factor solution for summer (n = 36) (Figure 1). Similar overall variance (%) was explained by seasonal factor solutions. In each season, we were able to identify diesel factors. For combined winter and summer, we identified an eight-factor solution, explaining 84% of overall variance.
For winter samples, a five-factor solution explained 88% of overall variability across constituent concentrations. Factor one (which explained 50% of total variance) was characterized by several organic compounds, and interpreted as ‘traffic-related organic.’ Factor two (24%), interpreted as ‘traffic-related elemental’, was characterized by elemental constituents (Figure 1). Factor three (7%) included ‘diesel tracers’ (BC, fluoranthene, NO2, pyrene, total carbon). Factor four (4%) included ‘fuel oil tracers’ (Ni, V), while factor five (3%) suggested ‘motor vehicle’ (benzene, Cd, La, toluene).
For summer samples, a nine-factor solution explained 88% of variability across all constituents (Figure 1). Factor one (38%) was interpreted as ‘traffic-related elemental’, as several elemental constituents loaded strongly, and also included ‘fuel oil tracers’ (Ni, V). Factor two (18%) suggested ‘diesel tracers’ (benzo[ghi]fluoranthene, chrysene, Cr, fluoranthene, Mn, pyrene, total carbon, total EC, Zn). Factor three (9%) also included ‘diesel’ (benz[a]anthracene, BC, hopanes, NO2, total PAHs, total steranes). Factor four (6%) was characterized by an indicator of ‘brake/tire wear’ (Cu, Mo, Sb). Factor five (4%) included benzene and norhopane, whereas factor six (3%) included benzo[a]pyrene and indeno[123-cd]pyrene. Factor seven (3%) included toluene and total OC. Factor eight (3%) included benzo[e]pyrene. Factor nine (2%) included coal-related tracers (i.e., Se).
For combined samples (n = 72 samples: one from each of the 36 sites, over two seasons), factor one (36%) was interpreted as ‘traffic-related elemental’, as several elemental constituents loaded strongly (Figure 2). Factor two (16%) suggested ‘diesel’ (chrysene, fluoranthene, Mn, pyrene, total carbon, total EC, Zn). Factor three (11%) was characterized by tracers of ‘brake/tire wear’ (Cu, Mo, Sb). Factor four (7%) suggested ‘traffic-related organic’ (benz[a]anthracene, hopanes, total PAHs). Factor five (5%) contained ‘traffic-related organic’ compounds (benzo[a]pyrene, benzo[e]pyrene, benzo[ghi]perylene, indeno[123-cd]pyrene, total steranes). Factor six (4%) indicated ‘diesel’ (norhopane, toluene, total hopanes, total OC). Factor seven (3%) was characterized by benzo[ghi]fluoranthene and NO2. Factor eight (3%) included coal-related tracers (i.e., Se).

3.2. LUR Models for Factor Scores

For winter samples, variability in the ‘traffic-related organic’ factor was explained by building density within 75 m, and parking garages within 125 m (Table 2). Bus density within 50 m and truck density within 200 m explained variability in the ‘diesel’ factor. Higher factor scores were observed at sites within the downtown core, compared to those further away (Figure 3). Signaled intersections within 125 m and commercial land use within 50 m were significant for the ‘motor vehicle’ factor. Factor two, comprising ‘traffic-related elemental’ constituents, had no significant predictors, nor did the ‘fuel oil’ factor.
For summer samples, bus stop use within 100 m was significant in the final LUR for the ‘traffic-related elemental’ factor (Table 3). Bus density within 50 m was significant in the final model for the first ‘diesel’ factor; and truck density within 200 m for the second ‘diesel’ factor. For both diesel factors, higher factor scores were observed at sites within the downtown core, compared to those further away, as in winter (Figure 3). The ‘brake/tire wear’ factor was predicted by primary and secondary roadway length within 125 m. Truck density within 25 m and bus stop use within 100 m were significant for the ‘benzene/norhopane’ factor. Impervious area within 50 m and length of primary roads within 125 m explained significant variability in the ‘benzo[a]pyrene and indeno[123-cd]pyrene’ factor. Commercial land use within 200 m predicted the ‘benzo[e]pyrene’ factor. No significant predictors were identified for the ‘toluene/total OC’ and ‘coal’ factors.
For combined samples, the ‘traffic-related elemental’ factor was characterized by signaled intersections within 125 m (Table 4). The first ‘diesel’ factor was predicted by mean bus density within 200 m and commercial land use within 25 m. The ‘brake/tire wear’ factor was characterized by primary and secondary roadway length within 50 m, whereas the ‘traffic-related organic’ factor was predicted by traffic density within 200 m. Factor five, the other ‘traffic-related organic’ factor, was predicted by primary roadways within 125 m. Bus density within 200 m characterized the second ‘diesel’ factor. The ‘benzo[ghi]fluoranthene/NO2’ factor was predicted by temperature and bus density within 200 m. The ‘coal’ factor (Ni and Se) was predicted by commercial land use within 25 m, building density within 25 m, and railroad length within 200 m.

3.3. Sensitivity Analysis

Varying the factor loading cut-point to 0.50 or 0.70, the elimination or addition of constituents to any factor were minimal, and did not alter the factor interpretations based on the literature review. Using U.S. EPA’s PMF model, factor interpretations remained similar to those determined using the unconstrained factor analysis. Sensitivity testing of LUR models did not alter identification of key sources predicting variability in each factor.

4. Discussion

To identify suites of diesel-related constituents, and to identify key sources contributing to spatial variation in these constituents and overall PM2.5, we combined elemental and organic constituents in factor analyses for winter, summer, and merged across seasons. As hypothesized, we were able to successfully observe distinct factors related to diesel, and to use LUR modeling to identify key sources explaining spatial variation in these factors.
Distinct factors characterized by constituents previously associated with diesel emissions were observed in both the winter and summer seasons. In winter, one factor—consisting of BC, fluoranthene, NO2, pyrene, and total carbon—was interpreted as “bus- and truck-related,” and corroborated by LUR, in that both bus and truck densities explained significant spatial variance (R2 = 0.75). In summer, we identified two diesel-related factors: one bus-related (characterized by benzo[ghi]fluoranthene, chrysene, Cr, fluoranthene, Mn, pyrene, total carbon, total EC, and Zn), and one truck-related (characterized by benz[a]anthracene, BC, hopanes, NO2, total PAHs, and total steranes). As hypothesized, LUR models using GIS-based emissions source covariates roughly corroborated these factor interpretations; bus density explained significant variation in the bus-related factor, and truck density explained variation in the truck-related diesel marker. Merging across seasons, we identified an eight-factor solution including two apparent diesel factors: the first consisted of chrysene, fluoranthene, Mn, pyrene, total carbon, total EC, and Zn; the second included norhopane, toluene, total hopanes, and total OC. Both were correlated with bus density.
We previously used LUR modeling to assess spatial variation in individual pollutants including PM2.5, BC, EC, and OC across this area, and found that bus-related source indicators explained more spatial variance in these pollutants than did other source terms [27].
Due to the complexity of PM2.5, changes in diesel technology over time, and the spatial variability in the pattern of multiple emissions sources across an intra-metropolitan city, characterization of DPM is quite challenging, and there is a need to validate better tracers and to explore the utilization of factor analysis and related methods, to identify suites of constituents that may provide a diesel emissions “signature.” Here, we found that diesel factors varied somewhat in the relative loadings of different constituents each season—as expected, given the complex nature of diesel emissions and the substantial role of meteorology in modifying the chemical fate and transport of diesel emissions—although signatures were consistent enough to suggest source identifiability in both seasons.
DPM is estimated to be predominantly (~80%) carbon [19,20,21], although EC and OC are not specific to DPM. Jin et al. (2014) found that total carbon accounted for approximately 82% of DPM mass in heavy-duty diesel engines [46], while Noll et al. (2015) indicated a strong correlation between total carbon and EC [47]. Here, we examined a wide suite of potential tracers in combination, and would recommend doing so wherever possible. Nonetheless, we found that total carbon was strongly associated with diesel in both seasons, in both the factor analysis and LUR, while associations with BC, EC, or OC were less consistent. As such, our results do not contradict the Mine Safety and Health Administration (MSHA) guidance on the use of total carbon as a diesel exhaust marker [48]. We also found substantial loadings of PAHs, including fluoranthene and pyrene; these PAHs, derived from coal tar, were consistently identified in our diesel-related factors, regardless of season or analytic approach, and thus may prove useful markers of DPM across urban areas [49,50,51].
By examining a large number of different diesel-related tracers, we were able to distinguish among specific diesel sources (e.g., bus vs. truck), and to more clearly separate their impacts from those of other urban sources (e.g., non-tailpipe emissions, heating oil emissions). While most of our resultant factors were “traffic-related,” the type of vehicular emissions did differ substantially (e.g., bus vs. truck-related diesel, gasoline emissions, brake/tire wear). As such, the novelty of this study is the ability to separate specific “diesel” factors from a larger suite of pollutants within a dense urban core, including both tailpipe and non-tailpipe vehicular emissions, and other urban sources (e.g., heating fuel oil); we did so via a process which leveraged spatial correlations among pollutants, the existing literature to provide preliminary interpretations of source factors, and LUR modeling (which spatially linked source factors to GIS-based source terms) to corroborate factor interpretations. We found that the bulk of spatial variance in downtown-area emissions was indeed diesel-related emissions (specifically, from diesel buses), and demonstrated the utility of the method to identify modifiable targets for policy intervention and emissions reduction. By better quantifying these source-specific impacts and their spatial patterns through factor analysis and LUR modeling, we can better support the development of policies and interventions to directly reduce diesel-related exposures and improve health in urban areas.

5. Conclusions

In sum, we found substantial spatial variance in multiple elemental and organic constituents of PM2.5 previously associated with diesel emissions, even across a very small urban core (2.8 km2). Factor analytic source apportionment analyses, both stratified by and merged across seasons, identified multiple diesel-related constituent suites, variously explained in LUR models by GIS-based indicators of truck density, bus density, and other diesel sources. Our approach identified key constituents, including specific PAHs, which may prove useful tracers for DPM exposures in future urban source apportionment and epidemiological studies.

Author Contributions

Conceptualization, J.C.; Data curation, B.T., L.C. (Leah Cambal), L.C. (Lauren Chubb) and C.R.; Formal analysis, B.T., S.T., E.K., D.M., J.L.C.S. and J.C.; Funding acquisition, J.C.; Investigation, B.T., S.T., D.M. and J.L.C.S.; Methodology, B.T. and E.K.; Resources, B.T., S.T., D.M., J.L.C.S., L.C. (Leah Cambal), L.C. (Lauren Chubb) and C.R.; Software, B.T. and E.K.; Supervision, J.C.; Validation, B.T. and S.T.; Writing—original draft, B.T.; Writing—review & editing, B.T., S.T., E.K., D.M., J.L.C.S., L.C. (Leah Cambal), L.C. (Lauren Chubb), C.R. and J.C.

Funding

This work was supported by the Allegheny County Health Department (ACHD) Clean Air Fund.

Acknowledgments

The authors would like to thank Jayme Graham, Jason Maranche, Darrell Stern, and Jim Thompson of ACHD for support throughout the project. The authors would like to thank Rebecca Dalton, Sara Gillooly, Jessica McDonald and R. Tyler Rubright for field work support, and Isaac Johnson and Jessie L.C. Shmool for GIS support. The authors thank the Pittsburgh Department of Public Works (Alan Asbury and Mike Salem), Duquesne Light Company, and the Allegheny County Department of Parks for monitoring permissions.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Sydbom, A.; Blomberg, A.; Parnia, S.; Stenfors, N.; Sandstrom, T.; Dahlen, S.E. Health effects of diesel exhaust emissions. Eur. Respir. J. 2001, 17, 733–746. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  2. Hesterberg, T.W.; Long, C.M.; Bunn, W.B.; Lapin, C.A.; McClellan, R.O.; Valberg, P.A. Health effects research and regulation of diesel exhaust: An historical overview focused on lung cancer risk. Inhal. Toxicol. 2012, 24 (Suppl. 1), 1–45. [Google Scholar] [CrossRef]
  3. Kagawa, J. Health effects of diesel exhaust emissions—A mixture of air pollutants of worldwide concern. Toxicology 2002, 181–182, 349–353. [Google Scholar] [CrossRef]
  4. Ristovski, Z.D.; Miljevic, B.; Surawski, N.C.; Morawska, L.; Fong, K.M.; Goh, F.; Yang, I.A. Respiratory health effects of diesel particulate matter. Respirology 2012, 17, 201–212. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Jedrychowski, W.A.; Majewska, R.; Spengler, J.D.; Camann, D.; Roen, E.L.; Perera, F.P. Prenatal exposure to fine particles and polycyclic aromatic hydrocarbons and birth outcomes: A two-pollutant approach. Int. Arch. Occup. Environ. Health 2017, 90, 255–264. [Google Scholar] [CrossRef] [PubMed]
  6. Power, M.C.; Weisskopf, M.G.; Alexeeff, S.E.; Coull, B.A.; Spiro, A.; Schwartz, J. Traffic-related air pollution and cognitive function in a cohort of older men. Environ. Health Perspect. 2011, 119, 682–687. [Google Scholar] [CrossRef] [PubMed]
  7. Gerlofs-Nijland, M.E.; van Berlo, D.; Cassee, F.R.; Schins, R.P.F.; Wang, K.; Campbell, A. Effect of prolonged exposure to diesel engine exhaust on proinflammatory markers in different regions of the rat brain. Part. Fibre Toxicol. 2010, 7, 12. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  8. Nejad, S.H.; Takechi, R.; Mullins, B.J.; Giles, C.; Larcombe, A.N.; Bertolatti, D.; Rumchev, K.; Dhaliwal, S.; Mamo, J. The effect of diesel exhaust exposure on blood–brain barrier integrity and function in a murine model. J. Appl. Toxicol. 2014, 35, 41–47. [Google Scholar] [CrossRef] [PubMed]
  9. Li, C.; Li, X.; Jigami, J.; Hasegawa, X.; Suzuki, A.K.; Zhang, Y.; Fujitani, Y.; Nagaoka, K.; Watanabe, G.; Taya, K. Effect of nanoparticle-rich diesel exhaust on testosterone biosynthesis in adult male mice. Inhal. Toxicol. 2012, 24, 599–608. [Google Scholar] [CrossRef] [PubMed]
  10. Langrish, J.P.; Unosson, J.; Bosson, J.; Barath, S.; Muala, A.; Blackwell, S.; Soderberg, S.; Pourazar, J.; Megson, I.L.; Treweeke, A.; et al. Altered nitric oxide bioavailability contributes to diesel exhaust inhalation-induced cardiovascular dysfunction in man. J. Am. Heart Assoc. 2013, 2, e004309. [Google Scholar] [CrossRef] [PubMed]
  11. Mehus, A.A.; Reed, R.J.; Lee, V.S.; Littau, S.R.; Hu, C.; Lutz, E.A.; Burgess, J.L. Comparison of Acute Health Effects From Exposures to Diesel and Biodiesel Fuel Emissions. J. Occup. Environ. Med. 2015, 57, 705–712. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  12. Cruts, B.; van Etten, L.; Tornqvist, H.; Blomberg, A.; Sandstrom, T.; Mills, N.L.; Borm, P.J. Exposure to diesel exhaust induces changes in EEG in human volunteers. Part. Fibre. Toxicol. 2008, 5, 4. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  13. Campen, M.J.; McDonald, J.D.; Gigliotti, A.P.; Seilkop, S.K.; Reed, M.D.; Benson, J.M. Cardiovascular effects of inhaled diesel exhaust in spontaneously hypertensive rats. Cardiovasc. Toxicol. 2003, 3, 353–361. [Google Scholar] [CrossRef]
  14. Nemmar, A.; Al-Maskari, S.; Ali, B.H.; Al-Amri, I.S. Cardiovascular and lung inflammatory effects induced by systemically administered diesel exhaust particles in rats. Am. J. Physiol.-Lung Cell. Mol. Physiol. 2007, 292, L664–L670. [Google Scholar] [CrossRef] [PubMed]
  15. Brito, J.M.; Belotti, L.; Toledo, A.C.; Antonangelo, L.; Silva, F.S.; Alvim, D.S.; Andre, P.A.; Saldiva, P.H.; Rivero, D.H. Acute cardiovascular and inflammatory toxicity induced by inhalation of diesel and biodiesel exhaust particles. Toxicol. Sci. Off. J. Soc. Toxicol. 2010, 116, 67–78. [Google Scholar] [CrossRef] [PubMed]
  16. Goodson, J.M.; Weldy, C.S.; MacDonald, J.W.; Liu, Y.; Bammler, T.K.; Chien, W.M.; Chin, M.T. In utero exposure to diesel exhaust particulates is associated with an altered cardiac transcriptional response to transverse aortic constriction and altered DNA methylation. FASEB J. 2017, 31, 4935–4945. [Google Scholar] [CrossRef] [PubMed]
  17. Anenberg, S.C.; Schwartz, J.; Shindell, D.; Amann, M.; Faluvegi, G.; Klimont, Z.; Janssens-Maenhout, G.; Pozzoli, L.; Van Dingenen, R.; Vignati, E.; et al. Global air quality and health co-benefits of mitigating near-term climate change through methane and black carbon emission controls. Environ. Health Perspect. 2012, 120, 831–839. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  18. Centers for Disease Control. Monitoring of Diesel Particulate Exhaust in the Workplace. Available online: https://www.cdc.gov/niosh/docs/2003-154/pdfs/chapter-q.pdf (accessed on 27 September 2018).
  19. Noll, J.D.; Bugarski, A.D.; Patts, L.D.; Mischler, S.E.; McWilliams, L. Relationship between elemental carbon, total carbon, and diesel particulate matter in several underground metal/non-metal mines. Environ. Sci. Technol. 2007, 41, 710–716. [Google Scholar] [CrossRef] [PubMed]
  20. Cyrys, J.; Heinrich, J.; Hoek, G.; Meliefste, K.; Lewne, M.; Gehring, U.; Bellander, T.; Fischer, P.; van Vliet, P.; Brauer, M.; et al. Comparison between different traffic-related particle indicators: Elemental carbon (EC), PM2.5 mass, and absorbance. J. Expo. Anal. Environ. Epidemiol. 2003, 13, 134–143. [Google Scholar] [CrossRef] [PubMed]
  21. Keuken, M.P.; Jonkers, S.; Zandveld, P.; Voogt, M.; van den Elshout, S. Elemental carbon as an indicator for evaluating the impact of traffic measures on air quality and health. Atmos. Environ. 2012, 61, 1–8. [Google Scholar] [CrossRef]
  22. Clougherty, J.E.; Houseman, E.A.; Levy, J.I. Examining intra-urban variation in fine particle mass constituents using GIS and constrained factor analysis. Atmos. Environ. 2009, 43, 5545–5555. [Google Scholar] [CrossRef]
  23. Levy, J.I.; Clougherty, J.E.; Baxter, L.K.; Houseman, E.A.; Paciorek, C.J. Evaluating heterogeneity in indoor and outdoor air pollution using land-use regression and constrained factor analysis. Res. Rep. Health Eff. Inst. 2010, 152, 5–80. [Google Scholar]
  24. Stanek, L.W.; Sacks, J.D.; Dutton, S.J.; Dubois, J.B. Attributing health effects to apportioned components and sources of particulate matter: An evaluation of collective results. Atmos. Environ. 2011, 45, 5655–5663. [Google Scholar] [CrossRef]
  25. Tunno, B.J.; Dalton, R.; Michanowicz, D.R.; Shmool, J.L.; Kinnee, E.; Tripathy, S.; Cambal, L.; Clougherty, J.E. Spatial patterning in PM2.5 constituents under an inversion-focused sampling design across an urban area of complex terrain. J. Expo. Sci. Environ. Epidemiol. 2016, 26, 385–396. [Google Scholar] [CrossRef] [PubMed]
  26. Tunno, B.J.; Michanowicz, D.R.; Shmool, J.L.C.; Tripathy, S.; Kinnee, E.; Cambal, L.; Chubb, L.; Roper, C.; Clougherty, J.E. Spatial Patterns in Rush-Hour vs. Work-Week Diesel-Related Pollution across a Downtown Core. Int. J. Environ. Res. Public Health 2018, 15, E1968. [Google Scholar] [CrossRef] [PubMed]
  27. Tunno, B.J.; Shmool, J.L.C.; Michanowicz, D.R.; Tripathy, S.; Chubb, L.G.; Kinnee, E.; Cambal, L.; Roper, C.; Clougherty, J.E. Spatial variation in diesel-related elemental and organic PM2.5 components during workweek hours across a downtown core. Sci. Total Environ. 2016, 573, 27–38. [Google Scholar] [CrossRef] [PubMed]
  28. Shmool, J.L.; Michanowicz, D.R.; Cambal, L.; Tunno, B.; Howell, J.; Gillooly, S.; Roper, C.; Tripathy, S.; Chubb, L.G.; Eisl, H.M.; et al. Saturation sampling for spatial variation in multiple air pollutants across an inversion-prone metropolitan area of complex terrain. Environ. Health 2014, 13, 28. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  29. Chow, J.C.; Yu, J.Z.; Watson, J.G.; Ho, S.S.; Bohannan, T.L.; Hays, M.D.; Fung, K.K. The application of thermal methods for determining chemical composition of carbonaceous aerosols: A review. J. Environ. Sci. Health Part. A 2007, 42, 1521–1541. [Google Scholar] [CrossRef] [PubMed]
  30. Nielson, T. Reactivity of polycyclic aromatic hydrocarbons toward nitrating species. Environ. Sci. Technol. 1984, 18, 157–163. [Google Scholar] [CrossRef] [PubMed]
  31. Tsapakis, M.; Stephanou, E.G. Collection of gas and particle semi-volatile organic compounds: Use of an oxidant denuder to minimize polycyclic aromatic hydrocarbons degradation during high-volume air sampling. Atmos. Environ. 2003, 37, 4935–4944. [Google Scholar] [CrossRef]
  32. Esteve, W.; Budzinski, H.; Villenave, E. Relative rate constants for the heterogeneous reactions of NO2 and OH radicals with polycyclic aromatic hydrocarbons adsorbed on carbonaceous particles. Part 2: PAHs adsorbed on diesel particulate exhaust SRM 1650a. Atmos. Environ. 2006, 40, 201–211. [Google Scholar] [CrossRef]
  33. Galarneau, E. Source specificty and atmospheric processing of airborne PAHs: Implications for source apportionment. Atmos. Environ. 2008, 42, 8139–8149. [Google Scholar] [CrossRef]
  34. Caricchia, A.M.; Chiavarini, S.; Pezza, M. PAHs in the urban atmospheric particulate matter in the city of Naples (Italy). Atmos. Environ. 1999, 33, 3731–3738. [Google Scholar] [CrossRef]
  35. Ding, Z.; Wang, X.-M.; Xie, Z.-Q.; Xiang, C.-H.; Mai, B.-X.; Sun, L.-G.; Zheng, M.; Sheng, G.-Y.; Fu, J.-M.; Poschl, U. Atmospheric polycyclic aromatic hydrocarbons observed over the North Pacific Ocean and the Arctic area: Spatial distribution and source identification. Atmos. Environ. 2007, 41, 2061–2072. [Google Scholar] [CrossRef]
  36. ISO 9835:1993, Ambient Air—Determination of a Black Smoke Index. Available online: https://www.iso.org/standard/17715.html (accessed on 1 September 2017).
  37. Yan, B.; Kennedy, D.; Miller, R.L.; Cowin, J.P.; Jung, K.H.; Perzanowski, M.; Balletta, M.; Perera, F.P.; Kinney, P.L.; Chillrud, S.N. Validating a nondestructive optical method for apportioning colored particulate matter into black carbon and additional components. Atmos. Environ. 2011, 45, 7478–7486. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  38. Sutton, K.L.; Caruso, J.A. Liquid chromatography-inductively coupled plasma mass spectrometry. J. Chromatogr. A 1999, 856, 243–258. [Google Scholar] [CrossRef]
  39. Chow, J.C.; Watson, J.G.; Pritchett, L.C.; Pierson, W.R.; Frazier, C.A.; Purcell, R.G. The DRI thermal/optical reflectance carbon analysis system: Description, evaluation and applications in U.S. air quality studies. Atmos. Environ. 1993, 27A, 1185–1201. [Google Scholar] [CrossRef]
  40. van Drooge, B.L.; Nikolova, I.; Ballesta, P.P. Thermal desorption gas chromatography-mass spectrometry as an enhanced method for the quantification of polycyclic aromatic hydrocarbons from ambient air particulate matter. J. Chromatogr. A 2009, 1216, 4030–4039. [Google Scholar] [CrossRef] [PubMed]
  41. Schneider, W.; Moortgat, G.K.; Tyndall, G.S.; Burrows, J.P. Absorption cross-sections of NO2 in the UV and visible region (200–700 nm) at 298 K. J. Photochem. Photobiol. Chem. 1987, 40, 195–217. [Google Scholar] [CrossRef]
  42. Grosse, D.; McKernan, J. Passive Samplers for the Investigations of Air Quality: Method Description, Implementation, and Comparison to Alternative Sampling Methods; U.S. Environmental Protection Agency: Washington, DC, USA, 2014. [Google Scholar]
  43. Environmental Protection Agency (EPA). EPA Positive Matrix Factorization (PMF) Model. Available online: http://www.epa.gov/heasd/research/pmf.html (accessed on 27 September 2018).
  44. Clougherty, J.E.; Kheirbek, I.; Eisl, H.M.; Ross, Z.; Pezeshki, G.; Gorczynski, J.E.; Johnson, S.; Markowitz, S.; Kass, D.; Matte, T. Intra-urban spatial variability in wintertime street-level concentrations of multiple combustion-related air pollutants: The New York City Community Air Survey (NYCCAS). J. Expo. Sci. Environ. Epidemiol. 2013, 23, 232–240. [Google Scholar] [CrossRef] [PubMed]
  45. Tunno, B.J.; Michanowicz, D.R.; Shmool, J.L.; Kinnee, E.; Cambal, L.; Tripathy, S.; Gillooly, S.; Roper, C.; Chubb, L.; Clougherty, J.E. Spatial variation in inversion-focused vs. 24-h integrated samples of PM and black carbon across Pittsburgh, PA. J. Expo. Sci. Environ. Epidemiol. 2016, 26, 365–376. [Google Scholar] [CrossRef] [PubMed]
  46. Jin, T.; Qu, L.; Liu, S.; Gao, J.; Wang, J.; Wanga, F.; Zhang, P.; Bai, Z.; Xu, X. Chemical characteristics of particulate matter emitted from a heavy duty diesel engine and correlation among inorganic and PAH components. Fuel 2014, 116, 655–661. [Google Scholar] [CrossRef]
  47. Noll, J.; Gilles, S.; Wu, H.W.; Rubinstein, E. The relationship between elemental carbon and diesel particulate matter in underground metal/nonmetal mines in the United States and coal mines in Australia. J. Occup. Environ. Hyg. 2015, 12, 205–211. [Google Scholar] [CrossRef] [PubMed]
  48. MSHA. Compilation of Standards Addressing Diesel Particulate Matter Exposure of Underground Metal. and Nonmental Miners; DPM Outreach Seminars: Arlington, VA, USA, 2006.
  49. Fromme, H.; Oddoy, A.; Piloty, M.; Krause, M.; Lahrz, T. Polycyclic aromatic hydrocarbons (PAH) and diesel engine emission (elemental carbon) inside a car and a subway train. Sci. Total Environ. 1998, 217, 165–173. [Google Scholar] [CrossRef]
  50. Tokiwa, H.; Otofuji, T.; Nakagawa, R.; Horikawa, K.; Maeda, T.; Sano, N.; Izumi, K.; Otsuka, H. Dinitro derivatives of pyrene and fluoranthene in diesel emission particulates and their tumorigenicity in mice and rats. Dev. Toxicol. Environ. Sci. 1986, 13, 253–270. [Google Scholar] [PubMed]
  51. Kuusimaki, L.; Peltonen, K.; Mutanen, P.; Savela, K. Analysis of particle and vapour phase PAHs from the personal air samples of bus garage workers exposed to diesel exhaust. Ann. Occup. Hyg. 2003, 47, 389–398. [Google Scholar] [PubMed]
Figure 1. Factor loadings plot for winter five-factor and summer nine-factor solutions (n = 36).
Figure 1. Factor loadings plot for winter five-factor and summer nine-factor solutions (n = 36).
Ijerph 15 02177 g001
Figure 2. Factor loadings plot for eight-factor solution based on combined winter and summer pollutants (n = 72).
Figure 2. Factor loadings plot for eight-factor solution based on combined winter and summer pollutants (n = 72).
Ijerph 15 02177 g002
Figure 3. Spatial distribution of factor scores across monitoring locations for diesel-interpretsed factors (winter factor 3, summer factors 2 and 3).
Figure 3. Spatial distribution of factor scores across monitoring locations for diesel-interpretsed factors (winter factor 3, summer factors 2 and 3).
Ijerph 15 02177 g003
Table 1. GIS (Geographic information system)-based source density indicators used for LUR (land use regression) modeling of factor scores.
Table 1. GIS (Geographic information system)-based source density indicators used for LUR (land use regression) modeling of factor scores.
Source Category for LUR ModelingCovariates Examined
(All buffers tested from 25 m to 200 m)
Data Source
Traffic density indicatorsMean density of annualized average traffic
Mean density traffic
(primary and secondary roads)
Number of signaled intersections
Annualized average traffic/Aspect ratio
Pennsylvania Spatial Data Access (PASDA, 2014)
Southwestern Pennsylvania Commission (SPC, 2011)
Road-specific measuresMean beta index of road complexity
and connectivity
Distance to nearest intersection
Number of intersections
Distance to nearest major road
Summed length of primary roadways
Summed length of primary and
secondary roadways
Width of roadways
TeleAtlas StreetMap (2014)
PASDA (2014)
Truck, Bus, and DieselMean density of bus traffic
Distance to nearest bus route
Distance to nearest bus stop
Bus stop use (total number of trips)
Mean density of heavy truck traffic on
nearest primary roadway
Google Transit Feed (7/14)
PASDA (2014)
Industrial emissionsMean density of SO2 emissions
Mean density of PM2.5 emissions
Mean density of NOx emissions
Mean density of VOC emissions
National Emissions Inventory (NEI, 2011)
Land use/Built environmentTotal area of commercial parcels
Total area of industrial parcels
Total area of industrial and commercial
parcels
Distance to nearest park
Summed area of parks
Building counts
Distance to nearest building
Mean percentage of imperviousness
Allegheny County Office of Property Assessments
(AC OPA, 2013)
SPC (2011)
Allegheny County Department of Public Works (DPW)
National Land Cover Database (NLCD, 2011)
Transportation facilitiesDistance to nearest active railroad
Summed line length of active railroads
Distance to nearest bus depot
Summed area of parking lots and garages
Distance to river centerline
SPC (2011)
Google Transit (2014)
AC OPA (2013)
PASDA (National Hydrography Dataset, 2014)
Potential modifying factors
Structural modifiersAspect ratio: building height/ roadway
width
Mean building heights
DPW
TopographyAverage elevation
Average slope
Mean percentage of tree canopy
National Elevation Dataset (NED, 2013)
NLCD (2011)
MeteorologyTemperature
Relative humidity
Frequency of inversions
Wind direction
Wind speed
Obtained from sampler
Univ. of Wyoming, Dept. of Atm. Science (2013)
National Oceanic and Atmospheric Administration (NOAA, 2013)
Table 2. Winter factor score LUR (land use regression) results (n = 36). Percentage of explained variance is listed under each factor, along with proposed sources, final LUR covariates (with final R2), and covariates most strongly correlated with factor scores (rho).
Table 2. Winter factor score LUR (land use regression) results (n = 36). Percentage of explained variance is listed under each factor, along with proposed sources, final LUR covariates (with final R2), and covariates most strongly correlated with factor scores (rho).
Factor
(% variance)
Proposed SourcesFinal LUR Model Covariates (R2)Covariates Most Strongly Correlated with Factor Scores (r)
1 (50%)Traffic-related
(organic compounds, benzene and toluene, Cd, La, Mn, total EC and OC, total hopanes, PAHs, and steranes)
Building density, 75 m
Parking garages, 125 m (R2 = 0.30)
Building density (r = 0.44)
Roadway width, 75 m (r = 0.39)
Commercial land use, 75 m (r = 0.35)
Parking garages, 125 m
(r = 0.30)
2 (24%)Traffic-related
(elemental constituents)
No spatial covariates with
p < 0.05
Distance near intersection (r = −0.36)
3 (7%)Diesel
(BC, fluoranthene, NO2, pyrene, total carbon)
Bus density, 50 m
Truck density, 200 m (R2 = 0.75)
Bus density, 50 m (r = 0.83)
Bus stop use, 200 m (r = 0.80)
Truck density, 200 m (r = 0.63)
Signaled intersections, 125 m
(r = 0.62)
4 (4%)Fuel oil (Ni, V)No spatial covariates with
p < 0.05
Tree canopy, 75 m (r = −0.33)
Imperviousness, 150 m
(r = 0.30)
5 (3%)Motor vehicle
(benzene, Cd, La, toluene)
Signaled intersections, 125 m
Commercial land use, 50 m
Distance near intersection
(R2 = 0.44)
Signaled intersections, 125 m
(r = 0.42)
Commercial land use, 50 m
(r = 0.42)
Distance near intersection
(r = −0.42)
Building density, 25 m (r = 0.42)
Table 3. Summer factor score LUR (land use regression) results (n = 36).
Table 3. Summer factor score LUR (land use regression) results (n = 36).
Factor
(% variance)
Proposed SourcesFinal LUR Modeling Covariates (R2)Covariates Most Strongly Correlated with Factor Scores (r)
1 (38%)Traffic-related elemental
Fuel oil (Ni, V)
Bus stop use, 100 m (R2 = 0.38)Bus stop use, 100 m (r = 0.61)
Bus density, 100 m (r = 0.53)
Signaled intersections, 125 m
(r = 0.44)
Commercial land use, 200 m
(r = 0.39)
2 (18%)Diesel (benzo[ghi]fluoranthene, chrysene, Cr, fluoranthene, Mn, pyrene, total carbon, total EC, Zn)Bus density, 50 m (R2 = 0.54)Bus density, 50 m (r = 0.74)
Bus stop use, 75 m (r = 0.74)
Commercial land use, 175 m
(r = 0.47)
Signaled intersections, 75 m
(r = 0.45)
3 (9%)Diesel (benz[a]anthracene, BC, hopanes, NO2, total PAHs, total steranes)Truck density, 200 m
Aspect ratio, 50 m (R2 = 0.39)
Aspect ratio, 50 m (r = 0.53)
Truck density, 200 m (r = 0.50)
Traffic density, 200 m (r = 0.49)
4 (6%)Brake/ tire wear
(Cu, Mo, Sb)
Primary and secondary roadways, 125 m (R2 = 0.13)Bus density (r = 0.38)
Primary and secondary
roadways, 125 m (r = 0.37)
Truck density, 25 m (r = 0.36)
5 (4%)Benzene, norhopaneTruck density, 25 m
Bus stop use, 100 m (R2 = 0.21)
Bus stop use, 100 m (r = 0.31)
Truck density, 25 m (r = 0.30)
Parking garages, 150 m (r = 0.28)
6 (3%)Benzo[a]pyrene, indeno[123-cd] pyreneImperviousness, 50 m
Primary roadways, 125 m (R2 = 0.30)
Imperviousness, 50 m (r = 0.43)
Primary roadways, 125 m (r = 0.38)
Parking garages, 200 m (r = 0.35)
7 (3%)Toluene and total OCNo spatial covariates with p < 0.05Railroads, 200 m (r = 0.32)
8 (3%)Benzo[e]pyreneCommercial land use, 200 m
(R2 = 0.11)
Commercial land use, 100 m
(r = 0.33)
9 (2%)Coal (Se)No spatial covariates with p < 0.05No covariates with r > 0.15
Table 4. Combined winter and summer factor score LUR (land use regression) results (n = 72).
Table 4. Combined winter and summer factor score LUR (land use regression) results (n = 72).
Factor
(% variance)
Proposed SourcesFinal LUR Modeling Covariates (R2)Covariates Most Strongly Correlated with Factor Scores (r)
1 (36%)Traffic-related elementalSignaled intersections, 125 m (R2 = 0.07)Bus stop use, 100 m (r = 0.34)
Signaled intersections, 125 m (r = 0.27)
Commercial land use, 25 m (r = 0.25)
Bus density, 25 m (r = 0.25)
2 (16%)Diesel (chrysene, fluoranthene, Mn, pyrene, total carbon, total EC, Zn)Bus density, 200 m
Commercial land use, 25 m (R2 = 0.37)
Signaled intersections, 200 m (r = 0.57)
Bus stop use, 200 m (r = 0.56)
Bus density, 200 m (r = 0.55)
Truck density, 200 m (r = 0.51)
3 (11%)Brake/ tire wear
(Cu, Mo, Sb)
Primary and secondary roadways, 50 m (R2 = 0.10)Primary and secondary roadways, 50 m
(r = 0.23)
4 (7%)Traffic-related
organic (benz[a]anthracene, hopanes, total PAHs)
Traffic density, 200 m
(R2 = 0.06)
Traffic density, 200 m (r = 0.25)
Primary and secondary roadways,
200 m (r = 0.25)
5 (5%)Traffic-related organic (benzo[a]pyrene, benzo[e]pyrene, benzo[ghi]perylene, indeno[123-cd]pyrene, and total steranes)Primary roadways, 125 m PM2.5 emissions, (R2 = 0.19)Primary roadways, 125 m (r = 0.33)
Road complexity, 150 m (r = 0.30)
PM2.5 emissions (r = 0.30)
6 (4%)Diesel (norhopane, toluene, total hopanes, total OC)Bus density, 200 m
(R2 = 0.10)
Bus stop use, 175 m (r = 0.35)
Bus density, 200 m (r = 0.32)
Truck density, 200 m (r = 0.30)
7 (3%)Benzo[ghi]fluoranthene, NO2Temperature
Bus density, 200 m
(R2 = 0.73)
Temperature (r = −0.81)
Wind speed (r = 0.56)
Bus density, 200 m (r = 0.23)
8 (3%)Coal (Ni, Se)Commercial land use, 25 m
Building density, 25 m
Railroads, 200 m (R2 = 0.11)
Commercial land use, 25 m (r = 0.40)
Building density, 50 m (r = 0.33)
Railroads, 200 m (r = 0.29)

Share and Cite

MDPI and ACS Style

Tunno, B.J.; Tripathy, S.; Kinnee, E.; Michanowicz, D.R.; Shmool, J.L.; Cambal, L.; Chubb, L.; Roper, C.; Clougherty, J.E. Fine-Scale Source Apportionment Including Diesel-Related Elemental and Organic Constituents of PM2.5 across Downtown Pittsburgh. Int. J. Environ. Res. Public Health 2018, 15, 2177. https://0-doi-org.brum.beds.ac.uk/10.3390/ijerph15102177

AMA Style

Tunno BJ, Tripathy S, Kinnee E, Michanowicz DR, Shmool JL, Cambal L, Chubb L, Roper C, Clougherty JE. Fine-Scale Source Apportionment Including Diesel-Related Elemental and Organic Constituents of PM2.5 across Downtown Pittsburgh. International Journal of Environmental Research and Public Health. 2018; 15(10):2177. https://0-doi-org.brum.beds.ac.uk/10.3390/ijerph15102177

Chicago/Turabian Style

Tunno, Brett J., Sheila Tripathy, Ellen Kinnee, Drew R. Michanowicz, Jessie LC Shmool, Leah Cambal, Lauren Chubb, Courtney Roper, and Jane E. Clougherty. 2018. "Fine-Scale Source Apportionment Including Diesel-Related Elemental and Organic Constituents of PM2.5 across Downtown Pittsburgh" International Journal of Environmental Research and Public Health 15, no. 10: 2177. https://0-doi-org.brum.beds.ac.uk/10.3390/ijerph15102177

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop