Next Article in Journal
High-Performance Lithium-Rich Layered Oxide Material: Effects of Preparation Methods on Microstructure and Electrochemical Properties
Previous Article in Journal
A Fenton-Like Nanocatalyst Based on Easily Separated Magnetic Nanorings for Oxidation and Degradation of Dye Pollutant
Previous Article in Special Issue
Influence of Surface Chemistry on the Electrochemical Performance of Biomass-Derived Carbon Electrodes for its Use as Supercapacitors
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Element-Doped Functional Carbon-Based Materials

Carbon Materials Research Group, Department of Inorganic Chemistry, Faculty of Sciences, University of Granada, Avenida de Fuente Nueva, s/n, ES18071 Granada, Spain
*
Author to whom correspondence should be addressed.
Submission received: 18 December 2019 / Accepted: 3 January 2020 / Published: 11 January 2020
(This article belongs to the Special Issue Element-Doped Functional Carbon-based Materials)

Abstract

:
Carbon materials are one of the most fascinating materials because of their unique properties and potential use in several applications. They can be obtained from agricultural waste, organic polymers, or by using advanced synthesizing technologies. The carbon family is very wide, it includes classical activated carbons to more advanced types like carbon gels, graphene, and so on. The surface chemistry of these materials is one of the most interesting aspects to be studied. The incorporation of different types of chemical functionalities and/or heteroatoms such as O, N, B, S, or P on the carbon surface enables the modification of the acidic–basic character, hydrophilicity–hydrophobicity, and the electron properties of these materials, which in turn determines the final application. This book collects original research articles focused on the synthesis, properties, and applications of heteroatom-doped functional carbon materials.

The broad family of carbon materials includes classical activated carbons to carbon nanostructures like carbon gels, carbon nanotubes, fullerenes, graphene, and so on. In general, these materials present different properties and origins, but all of them possess a common characteristic, in other words, the ability to be prepared in many different shapes such as pellets, granular, powders, cloths, fibers, monoliths, foams, coatings, films, and so on. Furthermore, their porous texture and chemical properties can be tailored by physical/thermal and chemical processes, enabling the development of porosity and specific surface area and the incorporation of different chemical functionalities. Both porosity and surface chemistry have a marked influence on their performance in a specific application, either by themselves or in combination with other materials. In fact, carbon materials have demonstrated to be excellent options as adsorbents [1], catalysts [2,3], or catalyst supports [4] when compared to classic materials (e.g., alumina, silica or ceria) as consequence of their high stability in both acidic and alkaline media.
Surface chemistry is the most attractive property of carbon materials, since the chemical groups anchored on the carbon surface may interact with organic molecules, inorganic salts, and metals. The most common heteroatoms are oxygen (O), nitrogen (N), sulfur (S), boron (B), and phosphorus (P). They are often part of functional groups and determine the acidic–basic character and the hydrophilicity–hydrophobicity [5,6,7]. For instance, oxygen-containing groups such as carboxylic acids, anhydrides, lactones, and phenols have an acidic character, while quinones, pyrones, and chromene are basic groups [8,9,10]. On the other hand, delocalized π electrons from the basal planes also contribute to the basicity [11], but also to the variation of the electron density. This effect can also be achieved by the incorporation of boron atoms or nitrogen-containing groups (i.e., pyridine and pyrrole), and deficient or additional electrons being provided, respectively. Thus, changes in the chemical properties of carbon materials influence their adsorption behavior and catalytic activity in some reactions [1,4].
This Special Issue deals with the recent advances in heteroatom-doped carbon materials. Different synthesis procedures, characterization techniques, and applications were investigated for these functional materials. The Special Issue collects eleven full-length articles and a short communication.
H. Hamad et al. [12] prepared carbon–phosphorus–titanium composites from cellulose to be used as photocatalysts in the removal of Orange-G dye. They pointed out that the phosphorus-containing groups incorporated in the composites modified their textural properties, crystallinity, and photocatalytic performance. S. Zhang et al. [13] modified biochars obtained from agricultural waste using 3-mercaptopropyltrimethoxysilane epoxy-chloropropane via an ionic-imprinted technique. These materials were active as adsorbents of Cd (II) in an aqueous solution, showing a higher Cd-selectivity in the presence of Co (II), Pb (II), Zn (II), and Cu (II) and a good stability after several adsorption–desorption cycles. A. Elmouwahidi et al. [14] developed carbon materials from waste woods by KOH activation. The surface chemistry was modified by different chemical agents, which incorporated nitrogen- and oxygen-containing groups on the carbon surface. All doped materials, with the exception of that treated with nitric acid, showed good capacitance values and high cyclic stability when used as electrodes for supercapacitors. An alternative method to obtain N-doped carbon materials for the same application was proposed by T. Ai. et al. [15]. This method consisted of the use of a N-containing bio-phenolic resin as a precursor and subsequent activation by a molten-salt method. Carbon materials have also been demonstrated to be efficient electrocatalysts in the oxygen reduction reaction (ORR). A. Abdelwahab et al. [16] studied Co- and Ni-doped carbon xerogels, while N-doped carbon fibers and microspheres synthesized from apricot sap were proposed by R. Kanuragaran et al. [17].
Carbon capture is a growing technology, whose implementation can be achieved by the research of novel materials. R. Wei et al. [18] prepared N-doped carbon materials from resorcinol and formaldehyde after KOH activation and ammonia carbonization. A. A. Alghamdi et al. [19] employed N-doped graphene oxide sheets (N-GOs) obtained from different N-containing polymers and after KOH activation. In general, the CO2 capture capacity by N-doped materials was enhanced by the increase of the nitrogen content, the surface area, and the micropore volume. E. Rodriguez-Acevedo et al. [20] demonstrated that shallow reservoirs could be effective for carbon capture after injecting nanofluids based on N-rich carbon nanospheres. Finally, the last articles of this Special Issue deal with the development of N-doped graphene films for high sensitivity electrodes [21]; the functionalization of graphene oxides with p-phenylenediamine as a modifier [22]; and the induction of magnetic moments in graphene by introducing sp3-defects [23].
All the published papers were strictly peer reviewed following the standard review practices for the Materials journal. As the Guest Editors of this Special Issue, we acknowledge all of the authors for their prime contributions and the reviewers for their valuable comments to improve the quality of the papers. Finally, we would like to thank the staff members of Materials, in particular Clark Xu for its kind assistance.

Author Contributions

S.M.-T.: writing—original draft. A.F.P.-C. and F.C.-M.: review & editing. All authors have read and agreed to the published version of the manuscript.

Funding

This work was supported by Junta de Andalucía (grant numbers P12-RNM-2892 and RNM172) and ERDF/Ministry of Science, Innovation and Universities—State Research Agency/_Project ref. RTI2018-099224-B-I00. SMT acknowledges the financial support from the University of Granada (Reincorporación Plan Propio).

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Moreno-Castilla, C. Adsorption of organic molecules from aqueous solutions on carbon materials. Carbon 2004, 42, 83–94. [Google Scholar] [CrossRef] [Green Version]
  2. Tsuji, K.; Shiraishi, I. Combined desulfurization, denitrification and reduction of air toxics using activated coke: 2. Process applications and performance of activated coke. Fuel 1997, 76, 555–560. [Google Scholar] [CrossRef]
  3. Morales-Torres, S.; Silva, A.M.T.; Pérez-Cadenas, A.F.; Faria, J.L.; Maldonado-Hódar, F.J.; Figueiredo, J.L.; Carrasco-Marín, F. Wet air oxidation of trinitrophenol with activated carbon catalysts: Effect of textural properties on the mechanism of degradation. Appl. Catal. B Environ. 2010, 100, 310–317. [Google Scholar] [CrossRef]
  4. Serp, P.; Figueiredo, J.L. Carbon Materials for Catalysis; John Wiley & Sons: Hoboken, NJ, USA, 2009. [Google Scholar]
  5. Boehm, H.P. Some aspects of the surface chemistry of carbon blacks and other carbons. Carbon 1994, 32, 759–769. [Google Scholar] [CrossRef]
  6. Kapteijn, F.; Moulijn, J.A.; Matzner, S.; Boehm, H.P. The development of nitrogen functionality in model chars during gasification in CO2 and O2. Carbon 1999, 37, 1143–1150. [Google Scholar] [CrossRef]
  7. Salame, I.I.; Bandosz, T.J. Surface Chemistry of Activated Carbons: Combining the Results of Temperature-Programmed Desorption, Boehm, and Potentiometric Titrations. J. Colloid. Interf. Sci. 2001, 240, 252–258. [Google Scholar] [CrossRef]
  8. Figueiredo, J.L.; Pereira, M.F.R.; Freitas, M.M.A.; Órfão, J.J.M. Modification of the surface chemistry of activated carbons. Carbon 1999, 37, 1379–1389. [Google Scholar] [CrossRef]
  9. Morales-Torres, S.; Silva, T.L.S.; Pastrana-Martínez, L.M.; Brandão, A.T.S.C.; Figueiredo, J.L.; Silva, A.M.T. Modification of the surface chemistry of single- and multi-walled carbon nanotubes by HNO3 and H2SO4 hydrothermal oxidation for application in direct contact membrane distillation. Phys. Chem. Chem. Phys. 2014, 16, 12237–12250. [Google Scholar] [CrossRef]
  10. Pastrana-Martínez, L.M.; Morales-Torres, S.; Likodimos, V.; Falaras, P.; Figueiredo, J.L.; Faria, J.L.; Silva, A.M.T. Role of oxygen functionalities on the synthesis of photocatalytically active graphene-TiO2 composites. Appl. Catal. B Environ. 2014, 158–159, 329–340. [Google Scholar] [CrossRef]
  11. Lopez-Ramon, M.V.; Stoeckli, F.; Moreno-Castilla, C.; Carrasco-Marin, F. On the characterization of acidic and basic surface sites on carbons by various techniques. Carbon 1999, 37, 1215–1221. [Google Scholar] [CrossRef]
  12. Hamad, H.; Castelo-Quibén, J.; Morales-Torres, S.; Carrasco-Marín, F.; Pérez-Cadenas, A.F.; Maldonado-Hódar, F.J. On the Interactions and Synergism between Phases of Carbon–Phosphorus–Titanium Composites Synthetized from Cellulose for the Removal of the Orange-G Dye. Materials 2018, 11, 1766. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  13. Zhang, S.; Yang, X.; Liu, L.; Ju, M.; Zheng, K. Adsorption Behavior of Selective Recognition Functionalized Biochar to Cd(II) in Wastewater. Materials 2018, 11, 299. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  14. Elmouwahidi, A.; Bailón-García, E.; Romero-Cano, L.A.; Zárate-Guzmán, A.I.; Pérez-Cadenas, A.F.; Carrasco-Marín, F. Influence of Surface Chemistry on the Electrochemical Performance of Biomass-Derived Carbon Electrodes for its Use as Supercapacitors. Materials 2019, 12, 2458. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  15. Ai, T.; Wang, Z.; Zhang, H.; Hong, F.; Yan, X.; Su, X. Novel Synthesis of Nitrogen-Containing Bio-Phenol Resin and Its Molten Salt Activation of Porous Carbon for Supercapacitor Electrode. Materials 2019, 12, 1986. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  16. Abdelwahab, A.; Carrasco-Marín, F.; Pérez-Cadenas, A.F. Carbon Xerogels Hydrothermally Doped with Bimetal Oxides for Oxygen Reduction Reaction. Materials 2019, 12, 2446. [Google Scholar] [CrossRef] [Green Version]
  17. Karunagaran, R.; Coghlan, C.; Shearer, C.; Tran, D.; Gulati, K.; Tung, T.T.; Doonan, C.; Losic, D. Green Synthesis of Three-Dimensional Hybrid N-Doped ORR Electro-Catalysts Derived from Apricot Sap. Materials 2018, 11, 205. [Google Scholar] [CrossRef] [Green Version]
  18. Wei, R.; Dai, X.; Shi, F. Enhanced CO2 Adsorption on Nitrogen-Doped Carbon Materials by Salt and Base Co-Activation Method. Materials 2019, 12, 1207. [Google Scholar] [CrossRef] [Green Version]
  19. Alghamdi, A.A.; Alshahrani, A.F.; Khdary, N.H.; Alharthi, F.A.; Alattas, H.A.; Adil, S.F. Enhanced CO2 Adsorption by Nitrogen-Doped Graphene Oxide Sheets (N-GOs) Prepared by Employing Polymeric Precursors. Materials 2018, 11, 578. [Google Scholar] [CrossRef] [Green Version]
  20. Rodriguez Acevedo, E.; Cortés, F.B.; Franco, C.A.; Carrasco-Marín, F.; Pérez-Cadenas, A.F.; Fierro, V.; Celzard, A.; Schaefer, S.; Cardona Molina, A. An Enhanced Carbon Capture and Storage Process (e-CCS) Applied to Shallow Reservoirs Using Nanofluids Based on Nitrogen-Rich Carbon Nanospheres. Materials 2019, 12, 2088. [Google Scholar] [CrossRef] [Green Version]
  21. Bourquard, F.; Bleu, Y.; Loir, A.-S.; Caja-Munoz, B.; Avila, J.; Asensio, M.-C.; Raimondi, G.; Shokouhi, M.; Rassas, I.; Farre, C.; et al. Electroanalytical Performance of Nitrogen-Doped Graphene Films Processed in One Step by Pulsed Laser Deposition Directly Coupled with Thermal Annealing. Materials 2019, 12, 666. [Google Scholar] [CrossRef] [Green Version]
  22. Sun, H.-J.; Liu, B.; Peng, T.-J.; Zhao, X.-L. Effect of Reaction Temperature on Structure, Appearance and Bonding Type of Functionalized Graphene Oxide Modified P-Phenylene Diamine. Materials 2018, 11, 647. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  23. Tang, T.; Wu, L.; Gao, S.; He, F.; Li, M.; Wen, J.; Li, X.; Liu, F. Universal Effectiveness of Inducing Magnetic Moments in Graphene by Amino-Type sp3-Defects. Materials 2018, 11, 616. [Google Scholar] [CrossRef] [PubMed] [Green Version]

Share and Cite

MDPI and ACS Style

Morales-Torres, S.; Pérez-Cadenas, A.F.; Carrasco-Marín, F. Element-Doped Functional Carbon-Based Materials. Materials 2020, 13, 333. https://0-doi-org.brum.beds.ac.uk/10.3390/ma13020333

AMA Style

Morales-Torres S, Pérez-Cadenas AF, Carrasco-Marín F. Element-Doped Functional Carbon-Based Materials. Materials. 2020; 13(2):333. https://0-doi-org.brum.beds.ac.uk/10.3390/ma13020333

Chicago/Turabian Style

Morales-Torres, Sergio, Agustín F. Pérez-Cadenas, and Francisco Carrasco-Marín. 2020. "Element-Doped Functional Carbon-Based Materials" Materials 13, no. 2: 333. https://0-doi-org.brum.beds.ac.uk/10.3390/ma13020333

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop