Next Article in Journal
Factors Affecting Global versus Local Environmental and Economic Performance of Dairying: A Case Study of Swiss Mountain Farms
Next Article in Special Issue
The Influence of Social Capitalism on Construction Safety Behaviors: An Exploratory Megaproject Case Study
Previous Article in Journal
Do Rural Policies Impact on Tourism Development in Italy? A Case Study of Agritourism
Previous Article in Special Issue
How Does Organizational Citizenship Behavior (OCB) Affect the performance of megaprojects? Insights from a System Dynamic Simulation
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

What are the Key Indicators of Mega Sustainable Construction Projects? —A Stakeholder-Network Perspective

1
Department of Construction Management, Jiangxi University of Finance & Economics, Nanchang 330013, China
2
School of Architecture and Built Environment; Entrepreneurship, Commercialisation and Innovation Centre (ECIC), The University of Adelaide, Adelaide 5005, Australia
3
School of Engineering and Technology, Central Queensland University, Sydney, NSW, Australia 2000
4
Centre for Comparative Construction Research, Faculty of Society and Design, Bond University, Gold Coast 4226, Australia
*
Author to whom correspondence should be addressed.
Sustainability 2018, 10(8), 2939; https://0-doi-org.brum.beds.ac.uk/10.3390/su10082939
Submission received: 18 July 2018 / Revised: 10 August 2018 / Accepted: 13 August 2018 / Published: 18 August 2018
(This article belongs to the Special Issue Sustainable Development and Management of Mega Projects)

Abstract

:
Mega sustainable construction projects (MSCPs) require complex system engineering. There are various indicators available to evaluate sustainable construction, and it is difficult to determine which the key indicators are among them. Existing studies do not adequately consider the stakeholders associated with the indicators of sustainable construction, leading to key decision-makers’ lack of targeted management strategies to improve the sustainability level of MSCPs. Using literature analysis and expert interviews, this study identified the key evaluation indicators of MSCPs from a stakeholder-network perspective. Social network analysis (SNA) was used to explore the relationships between the key evaluation indicators and corresponding stakeholders. The results showed that the government and designers significantly impacted other stakeholders and played as the key stakeholders in MSCPs. Regarding the indicators, applying energy-saving and intelligent technologies plays a key role in the MSCPs. This study links key indicators of MSCPs with the associated stakeholders, which helps decision-makers to develop targeted strategies to improve the sustainability level of MSCPs, thereby not only improving the efficiency and effectiveness of the intervention strategies, but also helping to save decision-makers’ monetary and human resources which are usually limited.

1. Introduction

The increasing fixed asset investments led to China’s rapidly developing construction industry. This development generated a significant amount of energy consumption, waste, and greenhouse gas emissions. Energy consumption accounts for two-thirds of global greenhouse gas emissions [1]. This highlights the need for the construction industry to reduce greenhouse gas emissions and the negative impacts on the environment. Sustainable construction can be defined as “building a healthy environment based on resource efficiency and ecological principles” [2]. Mega sustainable construction projects (MSCPs) are extremely large-scale projects typically costing more than $1 billion such as power-plant highways and tunnels, bridges, railways, seaports, and enormous projects for cultural events [3]. Many domains are involved in these mega projects, which leads to the inherent complexity of technology, structure, society, and management associated with megaprojects. MSCPs must integrate sustainability objectives (i.e., aspects related to the environment, economy, and society) with three project management objectives (duration, quality, and cost) [4]. Managers and decision-makers who lead MSCPs must consider, balance, and incorporate environmental, economic, and social indicators into the criteria for evaluating megaprojects [5].
Previous research on the evaluation indicators for assessing the sustainability level of construction projects focused on the characteristics of evaluation indicators, such as determining the weights of the indicators and on comparing different evaluation systems [6,7]. Studies also developed recommendations through simulation and modeling [8,9,10]. However, most existing studies paid little attention to the stakeholders influenced by or responsible for the implementation of the indicators. MSCPs involve a wide range of stakeholders, who have their own interests and are interested in various types of objectives. MSCPs are a complex adaptive system that requires close collaboration among different stakeholders to achieve the sustainability objectives of the project [11]. Fully considering the interests of all parties can continuously and effectively improve the project’s sustainability level. Therefore, MSCPs should be closely linked with stakeholders to set the objectives [12].
As a network analysis tool, social network analysis (SNA) emphasizes the inclusion of social science variables in complex project management. It considers the complexities brought by stakeholder relationships and their chain effects on the project. SNA is appropriate for analyzing the network of mega construction projects, and for other projects involving many objects and interdependent, iterative, and interactive relationships [13]. Using SNA to assess the interrelationships among stakeholders can contribute to achieving the sustainability objectives of projects. Therefore, this study adopted the SNA method to establish relationships between stakeholders and indicators for MSCPs based on the dimensions of society, economy, and environment. This study had the following objectives:
  • To use literature analysis and interviews to identify the key indicators for evaluating MSCPs.
  • To use workshops to establish links between different evaluation indicators and the corresponding stakeholders.
  • To use the SNA method to construct a network of the evaluation indicators and identify the key stakeholders and indicators in the network.
Few studies aimed to identify the critical evaluation indicators of sustainable construction considering stakeholders who are influenced by the indicators [14]. In this study, a stakeholder-indicator network model based on SNA was constructed, expanding the body of knowledge relating to sustainable construction. The identified key stakeholders and indicators could be used by relevant decision-makers to develop targeted strategies to improve the sustainability performance of mega construction projects.

2. Literature Review

Sustainable development means such a development that satisfies the present needs without a limitation of the possibility of satisfying the needs in the future [15]. Many composite indicators are used to measure the sustainable development of construction projects. These indicators should take into account the triple bottom line approach of sustainability, and therefore, include economic, environmental, and social dimensions in their assessment [16]. Accordingly, it is important for MSCPs to achieve a balance amongst the environmental, economic and social objectives. Kibwami and Tuteigensii [17] indicated that sustainable construction has three sets of goals, namely the economic, social, and environmental goals. In addition, there are previous studies on the indicators for evaluating MSCPs. For instance, Fernández-Sánchez and Rodríguez-López [18] used a sustainable breakdown structure (SBS) to reduce subjectivity and uncertainty in the process of indicator selection, and they divided the sustainability indicators into social, environmental, and economic dimensions as well. This is further supported by Zhong and Wu [19], who also built a sustainability evaluation system from the same three dimensions, as well as Whang and Kim [20], who highlighted the need to balance these dimensions in successfully achieving sustainability. Based on these previous studies, this research centered on the three dimensions of society, economy, and environment. This study synthesized previous studies and accounted for the linkages between stakeholders and the evaluation indicators for MSCPs.

2.1. Stakeholders in MSCPs

Stakeholder refers to “any group or individual that is likely to be affected or affecting the achievement of organizational goals” [21]. The Project Management Institute (PMI) Standards Committee defines project stakeholders as individuals and organizations who are active in the project, or those whose interests may be affected by project implementation or successful completion of the project. Compared with traditional construction projects, mega sustainable construction projects emphasized more types of stakeholders such as the public, suppliers, financial institutions, end-users, and professional associations. Many different types of stakeholders in mega projects have more uncertainties than traditional projects when they are faced with risks. Based on extensive literature analysis and semi-structured interviews, Yang and Shen [22] grouped construction project stakeholders into 14 categories, including clients, contractors, consultants, suppliers, end-users, governments, financiers/sponsors, communities, district councils, the general public, competitors, utilities, special interest groups, and the media. Similarly, Yang and Zou [23] grouped construction project stakeholders as clients, consultants, contractors, subcontractors/suppliers, end-users, financial organizations, government, environmental protection organizations, professional associations, media, the public, trade unions, evaluators/certifiers, and researchers/educators. Davis [24] proposed stakeholders of MSCPs should include the government, financiers, developers, consultants, suppliers, designers, owners, supervisors, contractors, sub-contractors, and end-users. Mok et al. [25] argued construction project stakeholders should include clients, consultants, the main contractor, engineers, subcontractors, end-users, and others.
Often initiated by the government, mega construction projects usually require massive investments in infrastructure, which have a long schedule, long lifespan, extreme complexity, and significant social impacts [26]. Mega construction projects are usually very complex in nature and each megaproject could easily cost over $1 billion [27]. MSCPs are a complex concept involving both the primary and secondary stakeholders [28,29]. Clients, owners, contractors, designers, suppliers, and governments have a direct link to mega construction projects. They often have sufficient influence on sustainable construction, and thus, could be considered as primary stakeholders [30]. Secondary stakeholders mainly refer to assessment organizations, scientific research institutions, and the surrounding people who do not directly participate in the project construction process.
Stakeholders have different interests in the development process of MSCPs. If their expectations and interests are not met, conflicts among them could emerge which hinders project success [31,32]. Stakeholder theory indicates that, to achieve sustainable development, organizations must balance different stakeholder interests [22]. Managing multiple stakeholders and maintaining an acceptable balance between their interests is the key to project delivery success [33,34,35]. Effective stakeholder management requires highly reliable and effective information exchange, which could eliminate information asymmetry among stakeholders [36]. In addition, by strengthening the cooperative relationships between stakeholders, the net benefits of MSCPs can be improved, especially for the owners and contractors [37].

2.2. Evaluation Indicators for MSCPs

The implementation of sustainable projects requires effective stakeholder management at all project stages. Such projects also require an accounting of the project’s social, economic, and environmental implications [38]. Life-cycle assessment (LCA) is the most widely used method to assess the environmental impact of construction projects, including mega projects. LCA is particularly useful for quantifying CO2 emissions, renewable energy use, water consumption, and other environmental factors in mega construction projects [39]. Past studies also compared different evaluation systems for green buildings, such as LEED (Leadership in Energy and Environmental Design), BREEAM (Building Research Establishment Environmental Assessment Method), CASBEE (Comprehensive Assessment System for Built Environment Efficiency), BEAM (Building Environmental Assessment Method), and SB Tool (Sustainable Building Tool) [40,41].
Previous studies also employed various methods to assess the sustainability performance of construction projects. Fernández-Sánchez and Rodríguez-López [18] proposed a framework of sustainability indicators assessing infrastructure projects. Aboushady and El-Sawy [42] used the analytical hierarchy process (AHP) method to develop the sustainability indicators of mega infrastructure construction projects. Waas et al. [43] used sustainability assessment (SA) and sustainability indicators (SIs) as theoretical tools for evaluating the decision strategies of sustainable construction. Chen et al. [10] combined fuzzy set theory, the Delphi method, and the discrete multi-criteria method, to analyze the sustainable development indicators in the uncertain economic environment. Lin et al. [14] used a structured method and a quantitative analysis model to develop an indicator system to evaluate megaproject social responsibility effectively.
Most of these evaluation methods and tools focus on project impacts on the environment and energy efficiency, without a holistic perspective on sustainability including the economic, financial, and social aspects [44]. This gap slowed down the development of assessment indicators for MSCPs [45]. Sustainable construction performance needs to be assessed by a combination of indicators, including energy consumption, thermal comfort levels, resident well-being, and productivity [46]. These indicators should respond to various stakeholders’ sustainability interests as well. However, few existing studies aim to link the assessment indicators with the associated stakeholders. As mentioned in Section 2.1, MSCPs typically involve various stakeholder groups with complex interests and interactions. Accordingly, linking indicator analysis and stakeholder management can effectively achieve sustainable development in MSCPs. Therefore, identifying critical indicators based on a perspective of stakeholders is a critical concern. This study aims to bridge these research gaps.

3. Methodology

3.1. Research Instrument Development

The research process for this study was designed in four stages (Figure 1). Based on the two methods of identifying stakeholders (empiricism and rationalism) proposed by Yang [47], Mok et al. [25] combined the two methods to analyze the stakeholders comprehensively. This study identified 12 types of stakeholders for MSCPs through literature analysis, including governments (S1), owners/investors (S2), planning/design enterprises (S3), contractors (S4), subcontractors/suppliers (S5), financial institutions (S6), environmental protection organizations (S7), evaluators/certifiers (S8), scientific/educational institutions (S9), end-users (S10), professional associations (S11), and surrounding populations (S12). The list of 12 stakeholders was then presented to 13 experts in the pilot study (Table 1) in the field of sustainable construction for further comments. With rich experience and knowledge for MSCPs, all interviewees were selected following a stakeholder-based sampling principle to ensure the data were representative.
To identify the evaluation indicators for MSCPs, 28 evaluation indicators were obtained from a literature analysis. The indicator list was further revised according to 13 experts’ feedback. Eventually, 23 evaluation indicators were identified as shown in Table 2. Five evaluation indicators were deleted because they were duplicated with other indicators. A relationship table was developed to link sustainable construction evaluation indicators with the stakeholders (Table 2). The design structural matrix method was adopted in this study to define the links in the evaluation indicator network. The link was defined by the impact from one indicator to the other. The data were collected from workshops and interviews, with more details in the following sections. The initial data collection process lasted two months. After the data were collected and collated, the results were reported back to the interviewees, to facilitate the identification of fuzzy areas.

3.2. Data Collection

Twelve types of stakeholders were contacted and invited to participate in this study. This study used snowball sampling technology to encourage more potential respondents to participate in the study [32]. A total of 120 potential interviewees were invited, and 36 were willing to participate in the interview, which leads to a response rate of 30%. Each type of stakeholder consisted of three individuals. Interviewees had 5–20 years of working experience, mainly in government departments, scientific research institutions, planning/design enterprises, and construction companies. These interviewees formed a workshop, which reduced ambiguity through open discussion and improved data reliability by sharing information among different participants [64,65]. In the workshop, 36 interviewees were divided into 12 different types of stakeholder groups. These groups were organized to identify stakeholder-associated indicators in the project. They then were asked to evaluate the tightness between different indicators and stakeholders. To ensure the reliability of the results, interview questions were sent to the interviewees via e-mail before the face-to-face workshop to prepare them for the event [32].
Roundtables started with an introduction of researchers. They discussed the objectives of this study and provided a list of topics to guide discussion. In the workshop, participants were asked to answer some types of “how” and “what” questions, such as how indicators are connected to stakeholders and what the degree is between different stakeholder-associated indicators. The workshop participants contributed to the development of a stakeholder-associated indicator interrelationship matrix in which the possibility and consequence of the impact between risks were determined with five-point values. A Likert scale (1 to express complete disagreement, and 5 to express complete consent) was used as well for some questions. This approach was similar to studies conducted by Li et al. [66]. To reduce ambiguity, we verbally explained questions that were not clear to the interviewees. After the workshop, the stakeholder-associated indicator interrelationship matrix was completed.

3.3. Data Analysis

To visualize the data, we established a structural matrix to determine the relationships between stakeholders and indicators. This step mainly defined the interactions between indicators. After transforming the data, the matrix data were entered into the NetMiner 4 software. This allowed the derivation of the network chart showing the sustainable construction evaluation indicator and the status centrality map.
In SNA, the first step is to identify the nodes. For this study, the number Si (i = 1, 2–12) represents 12 stakeholders, and the number Nj (j = 1, 2–23) represents 23 evaluation indicators. For example, a line from S1N2 to S3N4 indicates that S1N2 affects S3N4. Then interviewees from S1 and S3 were interviewed to answer the question: “Can S1N2 affect S3N4, and if so, to what degree does S1N2 influence S3N4?” After collection, the data were entered into NetMiner 4 to visualize the network. According to the analysis of network characteristics in sustainable construction, this paper mainly analyzes the network density, network cohesion, node degree, intermediation, and status centrality of the stakeholder index network [25,65,67]. Table 3 explains the theoretical definitions of these SNA metrics. These indicators can reflect key nodes and key connections in the network, leading to key stakeholders and key evaluation indicators in the sustainable project network. Finally, effective measures were proposed for managing stakeholders in large sustainable construction projects.

4. Results and Analysis

4.1. Identification of the Indicators for MSCPs

Based on the literature analysis and semi-structured interviews, this study identified 12 stakeholders and 23 evaluation indicators (Table 2) for MSCPs. The workshop participants identified 72 stakeholder-related indicators. There are 72 corresponding nodes in the figure, and 1495 links between the 72 nodes. These represent the interrelationships among the indicators. In addition, we calculated the out-degree and in-degree of each node to analyze node interactions. The out-degree is the effect of the node on other nodes, and the in-degree is the influence of other nodes on the node.

4.2. Network Analysis

In the sustainable construction network, each stakeholder-associated indicator was a network node. Node importance is determined by the degree of centrality, because the degree of centrality characterizes the ability of one node to develop interaction with other nodes. Figure 2 shows that the network nodes have 12 colors, representing 12 different stakeholders. The three shapes of the nodes represent the three dimensions of the indicators. A total of 1495 lines are connected to 72 nodes in this stakeholder-indicator network. The lines connecting the nodes represent information exchange relationships and node interactions. For example, pointing to SaNb from the node SiNj indicates that SiNj affects SaNb. The more connections a node has outside, the greater the node’s impact. A few nodes have a very high density in the center. This means that these nodes play a central role throughout the network. Figure 2 shows that the network has more red, yellow, and green nodes than nodes of other colors. These indicate that most of the indicators were associated with these three stakeholders. The corresponding stakeholders are the government, planning/design enterprises, and the contractors, respectively. In addition, the evaluation indicators associated with these stakeholders also cover most of the network. This is another way of reflecting their importance.
The network density and cohesion were also calculated to quantitatively investigate the allocation of sustainable stakeholder indicator networks. The network density reflects the overall connectivity of the network, and the cohesion captures network complexity by considering the reachability of different nodes. The higher the network density is, the higher the degree of correlation between the indicators is. The greater the cohesion value is, the more complex the network is. In this study, the network density was 0.292, and the network cohesion value was 0.447. The value of network cohesion was higher than the network density. This indicates that when considering the propagation effect of the whole network, the interrelationships of the stakeholder indicator are more complex.

4.3. Node and Link Level Analysis

Figure 3 shows the status centrality map of the stakeholder-indicator network. The node colors indicate the stakeholder groups, while the shapes show the indicator types. There are 10 concentric circles, reflecting the overall impact of each indicator. The closer the circle is to the center, the higher the degree of influence. The figure shows that the project’s internal rate of return (N15) and user/owner satisfaction (N23) are at the center of the map. These placements indicate that these indicators have a high degree of impact on other indicators. In addition, subcontractors/suppliers, owners/investors, planning/design enterprises, and scientific/educational institutions associated with these high-impact indicators have a significant impact on other stakeholders in MSCPs.
When considering the full life cycle of mega construction projects, the first step is for investors to decide whether to invest in sustainable buildings, which require new technologies and new sets of skills compared to traditional projects. In this network, owners/investors are the stakeholders with the greatest impact on sustainable construction indicators, because they initiate the evaluation about whether to invest in MSCPs rather than in traditional mega construction projects. If investors invest in MSCPs, they must consider the requirements of different evaluation indicators throughout the project cycle. They should also sign contracts with contractors based on these requirements to ensure project sustainability. Scientific/educational institutions are secondary, because, under different cultural backgrounds and different evaluation angles, different local projects will be evaluated according to different types of mega construction projects, and the evaluation indicators differ. At this point, scientific research institutions need to research evaluation indicators and provide technical knowledge support to the government to determine indicators suitable for local projects. Finally, considering the significant social, economic, and environmental benefits created by MSCPs, the government formulates relevant policies according to research results in this area. This encourages investors to invest in MSCPs actively.
In addition to the status centrality map, we calculated other node-level metrics, including self-network size, external centrality, out-degree, and degrees of difference (see Table 4). These values analyze the characteristics of evaluation indicators and their effects on the network of indicators from different perspectives. A large self-network scale indicates that many evaluation indicators are closely related to that node. Out-degree reflects the range of influence. The higher the out-degree is, the larger the range of influence is. In-degree is the number of lines to which the node as a target is incident. The degree of difference is equal to the difference between out-degree and in-degree [69]. The bigger the difference is, the greater the impact a specific node has on other nodes, compared to the impact of other nodes on itself [72]. Therefore, the index of these networks is calculated to see whether the index has more influence in the network. The index with a high value usually plays a more important role in the network of indicators. Table 4 shows that the waste management (S1N4) is an index near the top of the self-network scale index. Therefore, many indicators closely relate to the waste management. The highest out-degree values are seen with market supply and demand (S12N19), at a value of 141. This demonstrates that they have the largest range of influence on the evaluation indicator network. The difference in market supply and demand of MSCPs is the largest in the network indicator. This indicates that all indicators related to sustainable construction, such as the application of energy-saving technologies, waste management, and cost-effectiveness, are greatly affected by market supply and demand. These indicators themselves have little effect on market supply and demand.
Finally, the intermediation centrality of different nodes and links were analyzed to show that the index or interaction can control the degree of influence. This shapes the ability to control that influence. Table 5 shows the top 10 nodes and links in the betweenness centrality. Emphasizing these evaluation indicators or interactions can significantly reduce the complexity of the index network and improve management performance.
Table 5 presents the most important connections related to the key indicators. Controlling these key indicators is particularly important. This is because, if the links for these key indicators are cut off, the entire network would be paralyzed. This would prevent the achievement of the project’s sustainability goals. These indicators are analyzed next. Key indicators, including S1N4, S9N13, and S2N2, represent waste management, the application of energy saving, ecology, and intelligent technology, and land use. These indicators are particularly critical in this network, and managerial control of these key indicators can significantly enhance management performance. The stakeholder groups associated with these indicators include governments, planning/design enterprises, research institutes, owners, and contractors. This analysis shows that these stakeholders play a key role in the evaluation network of MSCPs. Rational project management will effectively reduce evaluation complexity and improve management performance. Comparing the centrality of nodes with the centrality of links, the research concludes that government departments occupy the main position in the network of sustainable indicators. The link between S2N2 and S1N10 has the greatest degree of centrality. This shows that, of the indicators, land use will have an important impact on market supply and demand.
Government decisions significantly impact owner and investor behaviors. The links to the governments (S1) have the highest centrality, demonstrating the government’s important role in the project evaluation network from the opposite side. In the practice of mega sustainable construction, the government can influence the strategic decisions of investors using different incentive policies. The percentage of community residents who must be relocated due to the project and noise level is an important consideration for government departments. In turn, investors are more likely to consider life-cycle costs when the government offers preferential policies. When the cost is within its acceptable range and is more profitable than traditional large-scale construction projects, the owner and investor choose to invest in MSCPs. Different types of construction projects will also affect a region’s economic diversity. Therefore, in the network of evaluation indicators for MSCPs, the primary responsibility for researching evaluation indicators lies with scientific research institutions. When implementing the project, this research found that the policies formulated by government departments are most critical in carrying out the evaluation.

5. Discussion

The analysis of indicators for MSCPs, and research on combining stakeholders and indicators using social network methods for these projects remain in their infancy. This study’s stakeholder analysis found that the government has the most influence on the actual operation of MSCPs. The government does and should adopt more incentive policies to support these operations. For example, the government provides more subsidies to manufacturers of low-margin green goods, as discussed by Guo et al. [73]. When determining indicators for MSCPs, the most critical stakeholder is the researcher or scientific research institution, which also plays an important role in developing sustainable building practices. This conclusion also verifies that by Tan et al. [74] in another aspect. In this study, planning/design enterprises, contractors, and suppliers are also very important in implementing evaluation indicators. Wang et al. [75] showed that a company’s emphasis on social performance creates a good reputation between internal and external stakeholders. This improves financial performance. Therefore, sustainable construction company managers should consider economic performance, social performance, and environmental performance.
In researching the evaluation indicator network, applying energy-saving and intelligent technology in the whole indicator network provides the most connection with other indicators and has the most extensive influence. This further validated the article by Ahn et al. [76], who found that the most important driving factors for sustainable design and construction are energy conservation, improvement of indoor environmental quality, environmental/resource conservation, and waste reduction. The results of the analysis show clear differences between traditional projects and MSCPs. Firstly, user/owner satisfaction, which is related to end-users, owners, and surrounding populations, is more important in MSCPs than traditional projects. Secondly, market supply and demand has the largest range of influence on the MSCPs, but has less influence on traditional projects. Thirdly, key stakeholders such as surrounding populations are regarded as less important for traditional projects than for MSCPs, which implies that MSCPs are more subject to public opinion. The impact of renewable energy utilization efficiency also deserves attention. Wind energy in renewable energy sources results in lower greenhouse gas emissions than other renewable energy sources. This form of energy also demands less water and has a larger social impact, but it requires more land and has higher capital costs [77]. Renewable-energy technologies are mostly realized in developing countries using hydropower technologies. This requires adequate technology, knowledge, and policy support. Constructing energy infrastructure is key to producing renewable energy and ensuring the sustainable achievement goals [78].
Many indicators related to government departments have an important impact on the entire network of indicators. Compared to other stakeholders, government departments pay more attention to economic diversity, market supply and demand, and waste management in the area’s projects affect. This may be related to China’s rapid urbanization and increased emphasis on environmental protection. For example, the government is strongly supporting the development of high-tech environmental protection industries. This highlights the importance of dividing the evaluation indicator of MSCPs into the three dimensions of environment, society, and economy. In previous research on sustainability indicators for mega construction projects, Shortall et al. [58] and Farzanehrafat et al. [63] focused on identifying evaluation indicators and determining weights. Shi et al. [79] accounted for stakeholders when analyzing sustainable construction at the project level. This study identified 12 stakeholders and 23 evaluation indicators to study the sustainable development level of mega construction projects. The indicators were divided into social, economic, and environmental dimensions. Stakeholders were linked to the evaluation indicators; a network perspective was applied to determine the strength of the link between the indicators and stakeholders, and the impact of different indicators was determined. Finally, a network visualization model was successfully established. This method can help project participants simplify the steps for identifying key evaluation indicators. This solves the problem of integrating evaluation indicators with mega construction projects, but also promotes a higher efficiency of sustainable project management.
In practice, results in this study may help mega construction project participants reduce the pressure of identifying many stakeholders and evaluating indicators. Firstly, the 12 stakeholders and 23 evaluation indicators in Table 2 can help participants identify their own stakeholders and indicators more clearly. It may also help them better understand the links between these different stakeholders and indicators. Secondly, the SNA model established in this study can help determine the key stakeholders and evaluation indicators based on network theory; the study also presented the potential degrees of interaction. As a result, project participants can focus on the evaluation indicators that significantly impact sustainability levels. Finally, this study established links with stakeholders in the process of identifying key evaluation indicators. This may help project participants identify key stakeholders who have important links to key indicators, improving their ability to manage from a stakeholder perspective, and further improving the sustainability of mega construction projects.
This study also redefined the sustainable construction concept through a list of sustainability indicators. It can be used to evaluate the sustainability performance. These indicators incorporate not only the major international sustainability metrics (economy, environment, and society) [6,19,23,80], but also linked them to stakeholders. The identified key stakeholders can simplify the steps for identifying key evaluation indicators. This study showed that government agencies should develop subsidy policies that apply energy-saving eco-intelligent technologies to the sustainability of mega construction projects. Agencies should also promptly respond to the needs of different stakeholder groups. Project investors should pay attention to government agency involvement and make decisions based on the policies they set. In the process of implementing projects, the interactions between the project, government, and other stakeholder groups (such as subcontractors, financial institutions, and scientific research institutions) will enhance the sustainability of mega construction projects.

6. Conclusions and Recommendations

Using the SNA method and stakeholder management theory, this study linked the evaluation indicators of MSCPs with stakeholders. Using a comprehensive literature analysis and expert interviews, 12 key stakeholder groups were identified for MSCPs. The key stakeholders include government departments, owners/investors, planning/design enterprises, research institutes, and contractors. Government departments play an important role in sustainable construction, and government incentive policies positively impact investments in MSCPs. These findings provide a useful reference for the Chinese government’s construction department to take appropriate measures to improve the sustainability level of mega construction projects. For instance, the government can significantly promote the development of sustainable construction by providing policy incentives to investors and financial institutions. In the same way, the study derived 23 indicators to evaluate sustainable construction. The key indicators are the economic diversity of the area affected by the project, the application of energy-saving ecological intelligent technology, waste management, and market supply and demand. This means that the application of economic diversity and energy-saving ecological intelligence technologies in the areas affected by mega construction projects may largely determine the sustainability level. These key indicators may capture the government’s attention, and they can formulate targeted policies. Therefore, emphasizing the strong management of these key stakeholders and key indicators may address the complexity of sustainable evaluation and improve management efficiency. According to the key indicators mentioned above, “further market-based incentives for MSCPs”, “financial incentives for the application of energy-saving ecological intelligent technology”, and “mandatory government policies and regulations for waste management” were the three strategies which can promote construction sustainability.
This study applied a social network analysis method to provide a new perspective on the identification of key stakeholders and key evaluation indicators for MSCPs. This method can help project participants simplify the steps for identifying key evaluation indicators. For example, contractor decision-making is affected by the supply and demand of the market, which largely impacts the development of mega sustainable construction. In addition, study results showed that the application of energy saving, ecology, and intelligent technology, as well as land use and waste management are the most important indicators of sustainable building evaluation, which differed from other studies [35,37]. This is because the evaluation tools used in those studies focused more on the environmental dimension and less on the socio-economic dimension. This led to differences in the results. Comprehensive analysis and evaluation indicators should be considered during data collection to address this problem.
This research did have some limitations. Firstly, the degree of connection between indicators for MSCPs was mainly based on knowledge shared by 36 interviewees; this knowledge was used for assessment. These respondents may have limited expertise in the indicators of MSCPs. Future studies should focus on collecting more comprehensive data that include more potential evaluation indicators. In addition, the stakeholder group sample size would benefit from being larger. This might make the conclusions more stable. However, highlighting these opportunities does not eliminate the contribution of this research. The in-depth interviews with representative stakeholders can determine network trends.

Author Contributions

G.W. conceived and designed the study; G.Q. completed the paper in English; J.Z., X.Z., and R.C. provided research advice and revised the manuscript.

Funding

This study was supported by the National Natural Science Foundation of China (71561009 and 71310165), the China Postdoctoral Science Foundation (2016M590605 and 2017T100477), the Postdoctoral Science Foundation of Jiangxi Province (2016KY27), the Social Science Planning Foundation of Jiangxi Province (16GL32), and the Natural Science Foundation of Jiangxi Province (20171BAA218004).

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. Pacheco-Torgal, F. High tech startup creation for energy efficient built environment. Renew. Sustain. Energy Rev. 2017, 71, 618–629. [Google Scholar] [CrossRef]
  2. Brandon, P.; Lombardi, P. Evaluating Sustainable Development in the Built Environment, 2nd ed.; Wiley-Blackwell: Hoboken, NJ, USA, 2010. [Google Scholar]
  3. Chen, H.; Su, Q.; Zeng, S.; Sun, D.; Shi, J.J. Avoiding the innovation island in infrastructure mega-project. Front. Eng. Manag. 2018, 5, 109–124. [Google Scholar] [CrossRef] [Green Version]
  4. Atombo, C.; Cudjoe, J.; Dzantor, K.; Agbo, A.A. Integration of Sustainable Construction in Project Management: A Case Study in Ghana. Int. J. Constr. Eng. 2015, 4, 13–25. [Google Scholar] [CrossRef]
  5. Alwan, Z.; Jones, P.; Holgate, P. Strategic sustainable development in the UK construction industry, through the framework for strategic sustainable development, using Building Information Modelling. J. Clean. Prod. 2017, 140, 349–358. [Google Scholar] [CrossRef] [Green Version]
  6. Mateus, R.; Bragança, L. Sustainability assessment and rating of buildings: Developing the methodology SBToolPT-H. Build. Environ. 2011, 46, 1962–1971. [Google Scholar] [CrossRef]
  7. De Fátima Castro, M.; Mateus, R.; Serôdio, F.; Bragança, L. Development of benchmarks for operating costs and resources consumption to be used in healthcare building sustainability assessment methods. Sustainability 2015, 7, 13222–13248. [Google Scholar] [CrossRef] [Green Version]
  8. Hueting, R.; Reijnders, L. Broad sustainability contra sustainability: The proper construction of sustainability indicators. Ecol. Econ. 2004, 50, 249–260. [Google Scholar] [CrossRef]
  9. Berardi, U. Clarifying the new interpretations of the concept of sustainable building. Sustain. Cities Soc. 2013, 8, 72–78. [Google Scholar] [CrossRef]
  10. Chen, R.-H.; Lin, Y.; Tseng, M.-L. Multicriteria analysis of sustainable development indicators in the construction minerals industry in China. Resour. Policy 2015, 46, 123–133. [Google Scholar] [CrossRef]
  11. Champagne, C.L.; Aktas, C.B. Assessing the Resilience of LEED Certified Green Buildings. Procedia Eng. 2016, 145, 380–387. [Google Scholar] [CrossRef]
  12. Bassioni, H.A.; Price, A.D.F.; Hassan, T.M. Building a conceptual framework for measuring business performance in construction: An empirical evaluation. Constr. Manag. Econ. 2005, 23, 495–507. [Google Scholar] [CrossRef]
  13. Pryke, S. Social Network Analysis in Construction; John Wiley & Sons: Hoboken, NJ, USA, 2012; ISBN 9781118343913. [Google Scholar]
  14. Lin, H.; Zeng, S.; Ma, H.; Zeng, R.; Tam, V.W.Y. An indicator system for evaluating megaproject social responsibility. Int. J. Proj. Manag. 2017, 35, 1415–1426. [Google Scholar] [CrossRef]
  15. Czarnecki, L.; Kapron, M. Sustainable Construction as a Research Area. Int. J. Soc. Mater. Eng. Resour. 2010, 17, 99–106. [Google Scholar] [CrossRef]
  16. Nevado-Peña, D.; López-Ruiz, V.-R.; Alfaro-Navarro, J.-L. The Effects of Environmental and Social Dimensions of Sustainability in Response to the Economic Crisis of European Cities. Sustainability 2015, 7, 8255–8269. [Google Scholar] [CrossRef] [Green Version]
  17. Kibwami, N.; Tutesigensi, A. Enhancing sustainable construction in the building sector in Uganda. Habitat Int. 2016, 57, 64–73. [Google Scholar] [CrossRef]
  18. Fernández-Sánchez, G.; Rodríguez-López, F. A methodology to identify sustainability indicators in construction project management—Application to infrastructure projects in Spain. Ecol. Indic. 2010, 10, 1193–1201. [Google Scholar] [CrossRef]
  19. Zhong, Y.; Wu, P. Economic sustainability, environmental sustainability and constructability indicators related to concrete- and steel-projects. J. Clean. Prod. 2015, 108, 748–756. [Google Scholar] [CrossRef]
  20. Whang, S.W.; Kim, S. Balanced sustainable implementation in the construction industry: The perspective of Korean contractors. Energy Build. 2015, 96, 76–85. [Google Scholar] [CrossRef]
  21. Freeman, R.E. Strategic Management: A Stakeholder Approach; Cambridge University Press: Cambridge, UK, 2010; ISBN 0273019139. [Google Scholar]
  22. Yang, R.J.; Shen, G.Q.P. Framework for Stakeholder Management in Construction Projects. J. Manag. Eng. 2015, 31, 04014064. [Google Scholar] [CrossRef] [Green Version]
  23. Yang, R.J.; Zou, P.X.W. Stakeholder-associated risks and their interactions in complex green building projects: A social network model. Build. Environ. 2014, 73, 208–222. [Google Scholar] [CrossRef]
  24. Davis, K. Different stakeholder groups and their perceptions of project success. Int. J. Proj. Manag. 2014, 32, 189–201. [Google Scholar] [CrossRef]
  25. Mok, K.Y.; Shen, G.Q.; Yang, R.J. Addressing stakeholder complexity and major pitfalls in large cultural building projects. Int. J. Proj. Manag. 2017, 35, 463–478. [Google Scholar] [CrossRef]
  26. Sun, J.; Zhang, P. Owner organization design for mega industrial construction projects. Int. J. Proj. Manag. 2011, 29, 828–833. [Google Scholar] [CrossRef]
  27. Hu, Y.; Chan, A.; Le, Y. Conceptual Framework Of Program Organization For Managing Construction Megaprojects—Chinese Client’s Perspective. In Proceedings of the Engineering Project Organizations Conference, Rheden, The Netherlands, 10–12 July 2012; pp. 1–24. [Google Scholar]
  28. Bourne, L.; Walker, D.H.T. Visualising and mapping stakeholder influence. Manag. Decis. 2005, 43, 649–660. [Google Scholar] [CrossRef]
  29. Jepsen, A.L.; Eskerod, P. Stakeholder analysis in projects: Challenges in using current guidelines in the real world. Int. J. Proj. Manag. 2009, 27, 335–343. [Google Scholar] [CrossRef]
  30. Johansson, P. Implementing stakeholder management: A case study at a micro-enterprise. Meas. Bus. Excell. 2008, 12, 33–41. [Google Scholar] [CrossRef]
  31. Shih, M. The evolving law of disputed relocation: Constructing inner-city renewal practices in Shanghai, 1990–2005. Int. J. Urban Reg. Res. 2010, 34, 350–364. [Google Scholar] [CrossRef] [PubMed]
  32. Yu, T.; Shen, G.Q.; Shi, Q.; Lai, X.; Li, C.Z.; Xu, K. Managing social risks at the housing demolition stage of urban redevelopment projects: A stakeholder-oriented study using social network analysis. Int. J. Proj. Manag. 2017, 35, 925–941. [Google Scholar] [CrossRef]
  33. Cleland, D.I.; Ireland, L.R. Project management: Strategic design and implementation, 4th ed.; McGraw-Hill Professional: New York, NY, USA, 2002; ISBN 0071393102. [Google Scholar]
  34. Karlsen, J.T. Project stakeholder management. EMJ—Eng. Manag. J. 2002, 14, 19–24. [Google Scholar] [CrossRef]
  35. Rose, K.H.; Ponnappa, G. Project Politics: A Systematic Approach to Managing Complex Relationships. Proj. Manag. J. 2012, 43, 101. [Google Scholar]
  36. Semenova, N.; Hassel, L.G. On the Validity of Environmental Performance Metrics. J. Bus. Ethics 2015, 132, 249–258. [Google Scholar] [CrossRef]
  37. Wu, G.; Zuo, J.; Zhao, X. Incentive Model Based on Cooperative Relationship in Sustainable Construction Projects. Sustainability 2017, 9, 1191. [Google Scholar] [CrossRef]
  38. Mok, K.Y.; Shen, G.Q.; Yang, R.J.; Li, C.Z. Investigating key challenges in major public engineering projects by a network-theory based analysis of stakeholder concerns: A case study. Int. J. Proj. Manag. 2017, 35, 78–94. [Google Scholar] [CrossRef]
  39. Vitiello, U.; Salzano, A.; Asprone, D.; Di Ludovico, M.; Prota, A. Life-Cycle Assessment of Seismic Retrofit Strategies Applied to Existing Building Structures. Sustainability 2016, 8, 1275. [Google Scholar] [CrossRef]
  40. Bernardi, E.; Carlucci, S.; Cornaro, C.; Bohne, R.A. An Analysis of the Most Adopted Rating Systems for Assessing the Environmental Impact of Buildings. Sustainability 2017, 9, 1226. [Google Scholar] [CrossRef]
  41. Shan, M.; Hwang, B. Green building rating systems: Global reviews of practices and research efforts. Sustain. Cities Soc. 2018, 39, 172–180. [Google Scholar] [CrossRef]
  42. Aboushady, A.M.; El-Sawy, S.A.R. Qualitative assessment framework to evaluate sustainability indicators affecting infrastructure construction projects in developing countries using the analytical hierarchy process (AHP). WIT Trans. Ecol. Environ. 2014, 179, 1309–1320. [Google Scholar] [CrossRef]
  43. Waas, T.; Hugé, J.; Block, T.; Wright, T.; Benitez-Capistros, F.; Verbruggen, A. Sustainability assessment and indicators: Tools in a decision-making strategy for sustainable development. Sustainability 2014, 6, 5512–5534. [Google Scholar] [CrossRef] [Green Version]
  44. Cooper, I. Which focus for building assessment methods—Environmental performance or sustainability? Build. Res. Inf. 1999, 27, 321–331. [Google Scholar] [CrossRef]
  45. Ding, G.K.C. Sustainable construction-The role of environmental assessment tools. J. Environ. Manag. 2008, 86, 451–464. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  46. Azar, E.; Nikolopoulou, C.; Papadopoulos, S. Integrating and optimizing metrics of sustainable building performance using human-focused agent-based modeling. Appl. Energy 2016, 183, 926–937. [Google Scholar] [CrossRef]
  47. Yang, R.J. An investigation of stakeholder analysis in urban development projects: Empirical or rationalistic perspectives. Int. J. Proj. Manag. 2014, 32, 838–849. [Google Scholar] [CrossRef]
  48. Govindan, K.; Madan Shankar, K.; Kannan, D. Sustainable material selection for construction industry—A hybrid multi criteria decision making approach. Renew. Sustain. Energy Rev. 2016, 55, 1274–1288. [Google Scholar] [CrossRef]
  49. Morse, S.; McNamara, N.; Acholo, M.; Okwoli, B. Sustainability indicators: The problem of integration. Sustain. Dev. 2001, 9, 1–15. [Google Scholar] [CrossRef]
  50. Michelsen, O.; Lindner, J.P. Why include impacts on biodiversity from land use in LCIA and how to select useful indicators? Sustainability 2015, 7, 6278–6302. [Google Scholar] [CrossRef] [Green Version]
  51. Greaker, M.; Espen, P.; Alfsen, K.H.; Ericson, T.; Stoknes, P.E.; Alfsen, K.H.; Ericson, T. A Kantian approach to sustainable development indicators for climate change. Ecol. Econ. 2013, 91, 10–18. [Google Scholar] [CrossRef] [Green Version]
  52. Alfsen, K.H.; Greaker, M. From natural resources and environmental accounting to construction of indicators for sustainable development. Ecol. Econ. 2007, 61, 600–610. [Google Scholar] [CrossRef] [Green Version]
  53. Wang, X.; Zhao, G.; He, C.; Wang, X.; Peng, W. Low-carbon neighborhood planning technology and indicator system. Renew. Sustain. Energy Rev. 2016, 57, 1066–1076. [Google Scholar] [CrossRef]
  54. Magis, K. Community resilience: An indicator of social sustainability. Soc. Nat. Resour. 2010, 23, 401–416. [Google Scholar] [CrossRef]
  55. Lawn, P.A. A theoretical foundation to support the Index of Sustainable Economic Welfare (ISEW), Genuine Progress Indicator (GPI), and other related indexes. Ecol. Econ. 2003, 44, 105–118. [Google Scholar] [CrossRef]
  56. Shiau, T.A.; Chuen-Yu, J.K. Developing an indicator system for measuring the social sustainability of offshore wind power farms. Sustainability 2016, 8, 470. [Google Scholar] [CrossRef]
  57. Romero, J.C.; Linares, P. Exergy as a global energy sustainability indicator. A review of the state of the art. Renew. Sustain. Energy Rev. 2014, 33, 427–442. [Google Scholar] [CrossRef]
  58. Shortall, R.; Davidsdottir, B.; Axelsson, G. A sustainability assessment framework for geothermal energy projects: Development in Iceland, New Zealand and Kenya. Renew. Sustain. Energy Rev. 2015, 50, 372–407. [Google Scholar] [CrossRef]
  59. Mendes, C.; De Souza, L.S.; Kalid, R.; Esquerre, K.; Kiperstok, A. Assessment of the uncertainty associated with the energy indicator. Renew. Sustain. Energy Rev. 2011, 15, 3156–3164. [Google Scholar] [CrossRef]
  60. Iddrisu, I.; Bhattacharyya, S.C. Sustainable Energy Development Index: A multi-dimensional indicator for measuring sustainable energy development. Renew. Sustain. Energy Rev. 2015, 50, 513–530. [Google Scholar] [CrossRef] [Green Version]
  61. Liu, X.; Liu, G.; Yang, Z.; Chen, B.; Ulgiati, S. Comparing national environmental and economic performances through emergy sustainability indicators: Moving environmental ethics beyond anthropocentrism toward ecocentrism. Renew. Sustain. Energy Rev. 2016, 58, 1532–1542. [Google Scholar] [CrossRef]
  62. Brennan, A.J. Theoretical foundations of sustainable economic welfare indicators—ISEW and political economy of the disembedded system. Ecol. Econ. 2008, 67, 1–19. [Google Scholar] [CrossRef]
  63. Farzanehrafat, M.; Akbarnezhad, A.; Ghoddousi, P. Analysis of different views towards social sustainability in construction. In Proceedings of the 32nd ISARC, Oulu, Finland, 15–18 June 2015; pp. 1–8. [Google Scholar]
  64. Brinkmann, S. Interview. In Encyclopedia of Critical Psychology; Teo, T., Ed.; Springer: New York, NY, USA, 2014; pp. 1008–1010. ISBN 978-1-4614-5582-0. [Google Scholar]
  65. Yang, R.J.; Zou, P.X.W.; Wang, J. Modelling stakeholder-associated risk networks in green building projects. Int. J. Proj. Manag. 2016, 34, 66–81. [Google Scholar] [CrossRef]
  66. Li, H.; An, H.; Fang, W.; Wang, Y.; Zhong, W.; Yan, L. Global energy investment structure from the energy stock market perspective based on a Heterogeneous Complex Network Model. Appl. Energy 2016, 194, 648–657. [Google Scholar] [CrossRef]
  67. Yu, T.; Shen, G.Q.; Shi, Q.; Lai, X.; Li, C.Z.; Xu, K. Managing social risks at the housing demolition stage of urban redevelopment projects: A stakeholder-oriented study using social network analysis. Int. J. Proj. Manag. 2017, 35, 925–941. [Google Scholar] [CrossRef]
  68. Chinowsky, P.; Diekmann, J.; Galotti, V. Social Network Model of Construction. J. Constr. Eng. Manag. 2008, 134, 804–812. [Google Scholar] [CrossRef]
  69. Wasserman, S.; Faust, K. Social Network Analysis: Methods and Applications; Cambridge University Press: Cambridge, UK, 1995; ISBN 9780521382694. [Google Scholar]
  70. Loosemore, M. Social network analysis: Using a quantitative tool within an interpretative context to explore the management of construction crises. Eng. Constr. Archit. Manag. 1998, 5, 315–326. [Google Scholar] [CrossRef]
  71. Newman, M.E.J. Scientific collaboration networks. II. Shortest paths, weighted networks, and centrality. Phys. Rev. E 2001, 64, 016132. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  72. Li, C.Z.; Hong, J.; Xue, F.; Shen, G.Q.; Xu, X.; Mok, M.K. Schedule risks in prefabrication housing production in Hong Kong: A social network analysis. J. Clean. Prod. 2016, 134, 482–494. [Google Scholar] [CrossRef]
  73. Guo, D.; He, Y.; Wu, Y.; Xu, Q. Analysis of upply chain under different subsidy policies of the government. Sustainability 2016, 8, 1290. [Google Scholar] [CrossRef]
  74. Tan, Y.; Shen, L.; Yao, H. Sustainable construction practice and contractors’ competitiveness: A preliminary study. Habitat Int. 2011, 35, 225–230. [Google Scholar] [CrossRef]
  75. Wang, Y.; Berens, G. The Impact of Four Types of Corporate Social Performance on Reputation and Financial Performance. J. Bus. Ethics 2015, 131, 337–359. [Google Scholar] [CrossRef]
  76. Ahn, Y.H.; Pearce, A.R.; Wang, Y.; Wang, G. Drivers and barriers of sustainable design and construction: The perception of green building experience. Int. J. Sustain. Build. Technol. Urban Dev. 2013, 4, 35–45. [Google Scholar] [CrossRef]
  77. Evans, A.; Strezov, V.; Evans, T.J. Assessment of sustainability indicators for renewable energy technologies. Renew. Sustain. Energy Rev. 2009, 13, 1082–1088. [Google Scholar] [CrossRef]
  78. Pietrosemoli, L.; Monroy, C.R. The impact of sustainable construction and knowledge management on sustainability goals. A review of the Venezuelan renewable energy sector. Renew. Sustain. Energy Rev. 2013, 27, 683–691. [Google Scholar] [CrossRef] [Green Version]
  79. Shi, Q.; Zuo, J.; Zillante, G. Exploring the management of sustainable construction at the programme level: A Chinese case study. Constr. Manag. Econ. 2012, 30, 425–440. [Google Scholar] [CrossRef]
  80. Chan, A.P.C.; Darko, A.; Ameyaw, E.E. Strategies for promoting green building technologies adoption in the construction industry-An international study. Sustainability 2017, 9, 969. [Google Scholar] [CrossRef]
Figure 1. Research framework.
Figure 1. Research framework.
Sustainability 10 02939 g001
Figure 2. Stakeholder-associated sustainable index network.
Figure 2. Stakeholder-associated sustainable index network.
Sustainability 10 02939 g002
Figure 3. Indicator locations in the status centrality map.
Figure 3. Indicator locations in the status centrality map.
Sustainability 10 02939 g003
Table 1. Background of experts in the face-to-face interviews. MSCPs—mega sustainable construction projects.
Table 1. Background of experts in the face-to-face interviews. MSCPs—mega sustainable construction projects.
OrganizationRole of IntervieweeAgesExperience in ConstructionNumber of MSCPs Involved in
Construction companySenior engineer3610 years4
Construction companyCivil engineer3812 years5
Construction companyProject manager A5624 years10
Construction companyProject manager B5323 years10
House builderDeveloper A4517 years8
House builderDeveloper B4415 years7
House builderDesign engineer5532 years12
Research institutionsProfessor A5625 years9
Research institutionsProfessor B5424 years8
Construction and technical services organizationConsultant A4117 years14
Construction and technical services organizationConsultant B3814 years12
Real estate firmArchitectural4817 years8
Real estate firmArchitectural4515 years7
Table 2. Project stakeholder-associated indicators.
Table 2. Project stakeholder-associated indicators.
IndexIndex NameStakeholderIndex IDSourceDimension
N1Recycling of materials and waterS3
S4
S5
S3N1
S4N1
S5N1
[48,49]Environment
N2Land useS1
S2
S3
S1N2
S2N2
S3N2
[48,49,50]
N3Material resourcesS3
S4
S5
S3N3
S4N3
S5N3
[48,49]
N4Waste managementS1
S4
S5
S1N4
S4N4
S5N4
[40,42,49,51]
N5EcosystemS3
S4
S5
S3N5
S4N5
S5N5
[40,50,52]
N6Protection of water resourcesS1
S3
S4
S5
S7
S1N6
S3N6
S4N6
S5N6
S7N6
[48,53]
N7Air quality around the projectS4
S5
S4N7
S5N7
[40,49]
N8Indoor environmental qualityS2
S3
S10
S2N8
S3N8
S10N8
[54,55,56]
N9Greenhouse gas emissionsS1
S3
S4
S5
S1N9
S3N9
S4N9
S5N9
[18,49,57]
N10Noise levelS1
S4
S5
S12
S1N10
S4N10
S5N10
S12N10
[42,49,58]
N11Renewable energy efficiencyS3
S7
S8
S3N10
S7N10
S8N10
[42,49,57,59]
N12Best energy performanceS3
S11
S3N12
S11N12
[60]
N13Application of energy saving, ecology, and intelligent technologyS3
S7
S9
S3N13
S7N13
S9N13
[8,53]
N14Cost-effectivenessS2
S3
S4
S6
S2N14
S3N14
S4N14
S6N14
[8,18,40,42,53,61]Economy
N15Percentage of population receiving external benefits in project-affected areasS7
S9
S12
S7N15
S9N15
S12N15
[55,62]
N16Economic diversity in project-affected areasS1
S2
S6
S1N16
S2N16
S6N16
[58,62]
N17Life/endurance of construction and designS3
S4
S5
S3N17
S4N17
S5N17
[53]
N18Maintenance and renovationS3
S4
S5
S3N18
S4N18
S5N18
[53]
N19Market supply and demandS1
S2
S12
S1N19
S2N19
S12N19
[49,54,55,58]Society
N20Percentage of community residents who must be relocated due to the projectS1
S12
S1N20
S12N20
[49,54,55,58]
N21Work created throughout the project cycleS4
S5
S12
S4N21
S5N21
S12N21
[56,58,63]
N22Occupational health and safetyS3
S4
S5
S12
S3N22
S4N22
S5N22
S12N22
[42,55,56]
N23User and owner satisfactionS2
S3
S4
S5
S10
S2N23
S3N23
S4N23
S5N23
S10N23
[56]
Table 3. SNA metrics and their explanations.
Table 3. SNA metrics and their explanations.
MetricsTheoretical DefinitionExplanation
DensityThe ratio of actual ties in a network to the greatest number of possible ties when all nodes are interconnected. [68].Network density ranges between 0 and 1. The higher the density, the more indicator interrelations are there in the network.
CohesionThe number of ties, or the length of path to reach nodes in a network [69] The higher the cohesion, the closer the risks are connected in the network.
In-degreeThe number of direct incoming ties transmitted to a specific node [70]. A stakeholder with high in-degree has high accessibility to information in the project.
Out-degreeThe number of direct outgoing ties emitted by a particular node [70].A stakeholder with high out-degree is influential as it can quickly disseminate one’s information to a large population.
Degree differenceThe difference between out-degree and in-degree scores of a specific node [69].A stakeholder with larger in-degree than out-degree is considered peripheral (i.e., less influential) in the project as it is an information receiver more than the provider.
Betweenness centralityIt calculates the occurrence in which a specific node/link is situated between other pairs of nodes/links on the basis of the shortest path [71].This role facilitates communication by diffusing information to stakeholders who may otherwise be disintegrated from the network. This role may also interfere with communication if it transmits information in poor quality or untimely manner.
Table 4. Ranking of critical indicators based on status centrality, ego network, and nodal degree analyses. ID—identifier.
Table 4. Ranking of critical indicators based on status centrality, ego network, and nodal degree analyses. ID—identifier.
RankingIndex IDOut-status CentralityIndex IDEgo SizeIndex IDOut-degreeIndex IDDegree Difference
1S12N191.88S1N454S12N19141S12N19114
2S2N191.78S10N2352S2N19133S2N19106
3S1N191.70S12N1950S1N19130S1N19106
4S8N111.66S2N1949S8N11128S12N2157
5S9N131.55S2N2349S1N4122S1N1054
6S7N111.54S9N1348S7N11120S12N1048
7S1N41.51S1N1947S9N13120S8N1145
8S7N131.42S4N447S7N13112S4N1042
9S3N111.32S7N1346S4N4101S5N1042
10S3N131.27S5N446S5N4101S7N1142
Table 5. Key indicators and links according to the betweenness centrality.
Table 5. Key indicators and links according to the betweenness centrality.
RankIndex IDNode Betweenness CentralityLink IDLink Betweenness Centrality
1S1N40.050S2N2→S1N1040.544
2S9N130.049S2N2 →S1N2039.298
3S2N20.048S2N14 →S6N1629.483
4S7N130.045S3N5→S2N229.440
5S5N40.032S6N14 →S1N1628.163
6S1N20.030S6N14 →S2N1627.701
7S4N40.029S1N16→S2N1926.931
8S8N110.025S9N15→S12N2126.032
9S7N110.024S2N2→S12N2025.454
10S3N130.023S12N15→S4N2124.738

Share and Cite

MDPI and ACS Style

Wu, G.; Qiang, G.; Zuo, J.; Zhao, X.; Chang, R. What are the Key Indicators of Mega Sustainable Construction Projects? —A Stakeholder-Network Perspective. Sustainability 2018, 10, 2939. https://0-doi-org.brum.beds.ac.uk/10.3390/su10082939

AMA Style

Wu G, Qiang G, Zuo J, Zhao X, Chang R. What are the Key Indicators of Mega Sustainable Construction Projects? —A Stakeholder-Network Perspective. Sustainability. 2018; 10(8):2939. https://0-doi-org.brum.beds.ac.uk/10.3390/su10082939

Chicago/Turabian Style

Wu, Guangdong, Guofeng Qiang, Jian Zuo, Xianbo Zhao, and Ruidong Chang. 2018. "What are the Key Indicators of Mega Sustainable Construction Projects? —A Stakeholder-Network Perspective" Sustainability 10, no. 8: 2939. https://0-doi-org.brum.beds.ac.uk/10.3390/su10082939

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop