Next Article in Journal
Heat-Mitigation Strategies to Improve Pedestrian Thermal Comfort in Urban Environments: A Review
Next Article in Special Issue
Relationship between User Innovation Activities and Market Performance: Moderated Mediating Effect of Absorptive Capacity and CEO’s Shareholding on Innovation Performance
Previous Article in Journal
The Flip Teaching as Tool to Improving Students’ Sustainable Learning Performance in a Financial Course
Previous Article in Special Issue
Prediction of Plant Phenological Shift under Climate Change in South Korea
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A Study on the Mechanisms Linking Environmental Dynamism to Innovation Performance

College of Business Administration, Konkuk University, Seoul 05029, Korea
*
Author to whom correspondence should be addressed.
Sustainability 2020, 12(23), 9999; https://0-doi-org.brum.beds.ac.uk/10.3390/su12239999
Submission received: 20 October 2020 / Revised: 27 November 2020 / Accepted: 27 November 2020 / Published: 30 November 2020
(This article belongs to the Special Issue Ambidextrous Open Innovation for Sustainability)

Abstract

:
The purpose of our study is to examine the mechanisms that link environmental dynamism to firms’ innovation performance. Although there have been extensive studies on the effect of environmental dynamism on innovation performance, they have focused primarily on its direct effect and have resulted in rather inconsistent research findings. Thus, to explain the relationship between environmental dynamism and innovation performance more clearly, we intend to investigate the mechanisms through which environmental dynamism influences innovation performance in this study. Specifically, we aim to examine the mediation effects of strategic prospecting, absorptive capacity, and combined strategic prospecting–absorptive capacity on the relationship between environmental dynamism and innovation performance. Based on data collected from 266 small and medium-sized firms in Korea, our study has found that, assuming a causal interdependence between the mediators, both strategic prospecting and combined strategic prospecting–absorptive capacity mediate the relationship between environmental dynamism and innovation performance. It has also been found, however, that absorptive capacity alone does not mediate the relationship between environmental dynamism and innovation performance, while absorptive capacity mediates the relationship when it is linked to strategic prospecting. The results of our study further reveal that no direct effect of environmental dynamism on innovation performance exists, implying that the significant effect of environmental dynamism on innovation performance demonstrated in previous studies may be spurious in nature. Based on the findings, we present conclusions, theoretical and practical implications, and limitations with future research directions.

1. Introduction

Under the context of dynamic changes in the environment with the trend of the Fourth Industrial Revolution, firms have exhibited great interest in innovation as a means of responding to environmental changes effectively for their sustainable competitive advantage [1]. Firms are naturally required to create or adopt something new to sustain their development or growth under the dynamic business environment [2]. Thus, many business scholars have been actively conducting research on the impact of environmental dynamism on firms’ innovation or innovation performance [3,4,5,6,7,8,9,10,11,12,13,14,15,16].
A review of the literature reveals that existing studies on this issue tend to focus primarily on the direct effect of environmental dynamism on innovation or innovation performance. For example, Martinez-Conesa, Soto-Acosta, and Carayannis [8] have examined whether environmental dynamism has a direct influence on open innovation for small and medium-sized manufacturing companies in Spain. Pervan, Al-Ansaari, and Xu [11] have also studied the direct impact of market dynamism on innovation for SMEs in Dubai. Similarly, Turulja and Bajgoric [14] have examined whether environmental turbulence has a direct effect on product and process innovation for companies in Europe, and Soto-Acosta, Popa, and Martinez-Conesa [15] have also studied the direct influence of this factor on radical and incremental innovation for SMEs in Spain. Besides, with respect to the results of these existing studies, many studies have revealed a significantly positive direct effect of environmental dynamism on innovation or innovation performance [5,8,12,14], while some studies have shown no significant direct effect [6,13]. A summary of the literature review is provided in Appendix A.
However, according to the literature, little research has been conducted examining the mechanisms through which environmental dynamism enhances firms’ innovation performance, with the exception of research by Dhir, Aniruddha, and Mital [4] and Kim, Li, Yoo, and Kim [6]. Dhir et al. [4] have conceptually argued that environmental dynamism influences innovation performance positively through alliance network heterogeneity. Kim et al. [6] have empirically demonstrated that environmental dynamism improves innovation through external knowledge acquisition. While it may be important for managers to understand whether environmental dynamism has a direct positive impact on innovation performance, it is more important to understand how (i.e., through which mechanisms) environmental dynamism enhances innovation performance. Understanding “how” this occurs can provide firms with important implications regarding the improvement of innovation performance. In particular, given the lack of coherence, as noted above, among existing findings on the relationship between environmental dynamism and innovation or innovation performance, a study of the ways in which environmental dynamism affects innovation or innovation performance is required for a better understanding of that relationship.
Thus, we attempt to address the gap in the literature by identifying the mechanisms that link environmental dynamism to innovation performance effectively, based on theories in strategic management, and by analyzing the indirect effect of environmental dynamism on innovation performance through these mechanisms. In this study, we propose the following mechanisms for the first time in the literature that connect environmental dynamism with innovation performance: (1) strategic prospecting [17], based on the industrial organization theory that argues for an alignment between the environment, strategy, and performance (in the order environment > strategy > performance) [18]; (2) absorptive capacity [19], based on the dynamic capability theory that claims that there is an alignment between the environment, capability, and performance (environment > capability > performance) [20]; and (3) strategic prospecting–absorptive capacity, based on the strategic fit perspective that argues for an alignment between the environment, strategy, capability, and performance (environment > strategy > capability > performance) [21].
It is important to note that we take a mediation approach to the issue of fit or alignment in this study. According to Venkatraman [22], fit can be approached either by moderation (fit as moderation) or by mediation (fit as mediation), and it is believed that adopting the “fit as mediation” approach makes more sense here, as we intend to focus our analysis on the mediation effects of the mechanisms on the relationship between environmental dynamism and innovation performance.
Specifically, our study intends to investigate (1) the direct effect of environmental dynamism on innovation performance (direct effect), (2) the indirect effect of environmental dynamism on innovation performance through strategic prospecting (mediation effect), (3) the indirect effect of environmental dynamism on innovation performance through absorptive capacity (mediation effect), and (4) the indirect effect of environmental dynamism on innovation performance through the sequential path of strategic prospecting and absorptive capacity (double sequential mediation effect). In this regard, we address the following original research questions: (1) does environmental dynamism have a direct effect on innovation performance? (2) Does strategic prospecting mediate the relationship between environmental dynamism and innovation performance? (3) Does absorptive capacity mediate that relationship? (4) Does strategic prospecting–absorptive capacity mediate that relationship?
For empirical analysis, we utilized 266 valid questionnaires obtained by mail surveys from small and medium-sized firms engaged in 15 four-digit manufacturing industries in Korea. Our results about the direct effect showed that a total effect of environmental dynamism on innovation performance did exist, but when the mediators were considered, the direct effect of environmental dynamism on innovation performance disappeared completely. This suggests that the relationship between environmental dynamism and innovation performance is completely mediated by the intervening mechanisms. Furthermore, according to our results about the mediation effect, strategic prospecting and absorptive capacity, respectively, mediated the relationship between environmental dynamism and innovation performance when they were assumed to be independent. However, assuming a causal interrelationship between these mediators, strategic prospecting still mediated that relationship, while absorptive capacity alone did not, but absorptive capacity in conjunction with strategic prospecting (strategic prospecting–absorptive capacity) mediated the relationship.
Our paper is structured as follows. The next section discusses the theoretical background of our research. The following section presents a research model and hypotheses for the direct effect of environmental dynamism on innovation performance and the indirect effect of environmental dynamism on innovation performance through strategic prospecting, absorptive capacity, and strategic prospecting–absorptive capacity. The subsequent section discusses the methodology of our study, followed by a section providing the results of our study. The final section presents the conclusions, implications, and limitations of our study with potential future research directions.

2. Theoretical Background

2.1. Environmental Dynamism

The external environment within which firms continue to interact for their survival and success has become more dynamic in the context of the Fourth Industrial Revolution. Environmental dynamism generally refers to the rate of change in environmental factors over time, including technologies, markets, competitors, suppliers, and customers [9,23]. The higher the rate of change in the environment, the more dynamic the environment becomes. Furthermore, the rate of change in the environment comes from the speed and strength of change in the environment, depending on how fast and strong environmental change is [24]. As such, Volberda and Van Buggen [24] define environmental dynamism as the frequency and intensity of change in the environment. In addition, environmental dynamism makes it difficult for firms to predict the environment due to environmental instability and uncertainty [24]. Therefore, as the environment becomes more dynamic, firms tend to experience more unpredictable, unstable, and uncertain environments. For this reason, the literature tends to view environmental dynamism as being equivalent to environmental instability, variability, and turbulence [25]. Based on the literature, we define environmental dynamism as the rate of change in the environment over time in terms of its speed and strength.

2.2. Innovation Performance

According to the literature, innovation can be defined as an interactive process of generating new products, knowledge, and technologies by utilizing capabilities and knowledge inside and outside a firm [26]. Such innovation can play a significant role in helping firms to achieve sustainable growth in response to their uncertain environment [27]. In addition, innovation performance refers to the outcome of innovation, and it may appear in the form of the development of new products, gaining new market opportunities, and gaining competitive advantage through innovation activities [28]. In other words, innovation performance can include patents, product development, product launches, and increases in sales, profits, or market shares due to product launches [29]. In a similar vein, innovation performance can also be conceptualized as the degree of success of a firm’s new product development program in achieving its objectives [30]. Furthermore, the literature reveals that innovation performance can be measured based on the various definitions above. For example, innovation performance can be measured either by new technology development, new product development, and new product launches [31], by the sales or profit contribution of new products [28], or by how successful a firms’ new product development program is from an overall profitability standpoint [30]. In accordance with the existing literature, innovation performance is defined as the degree of success of a firm’s new product development program in terms of achieving its objectives in this study.

2.3. Strategic Prospecting and Mediation Role, Based on Industrial Organization Theory

Miles and Snow [17] argue that firms face the following three decision-making issues regarding coping with their external environment: (1) an entrepreneurial issue—decisions on specific product- and market-related scope; (2) an engineering issue—decisions on a technology or method for producing and distributing products; and (3) an administrative issue—decisions on approaches to coordinate and implement strategies. They further argue that firms can pursue different strategies depending on how sensitively they respond to their external environment with respect to these decision-making issues. Thus, following Miles and Snow’s rationale, we propose a concept of strategic prospecting in this study [32], which refers to firms’ strategic orientation towards sensitively exploring and responding to the initial signals of environmental changes by pursuing new products, markets, and technologies in relation to the decision-making issues mentioned above. Thus, firms with a higher level of strategic prospecting will be more willing to proactively explore and respond to the early signals of market needs and opportunities and aggressively expand into new products and markets. As Shortell and Zajac [33] suggest, the level of strategic prospecting as a continuum can be matched with the different types of strategies proposed by Miles and Snow [17]. Pursuing higher levels of strategic prospecting is equivalent to pursuing a strategy closer to the prospector strategy, while pursuing lower strategic prospecting is equivalent to pursuing a strategy closer to the defender strategy. In other words, the higher a firm’s strategic prospecting, the more offensive their strategic orientation, and the lower a firm’s strategic prospecting, the more defensive their strategic orientation.
The industrial organization theory in strategic management argues, based on the traditional structure–conduct–performance paradigm, that the industry structure or environment affects firms’ strategic behavior, which in turn influences their economic performance [34]. The theory suggests that firms develop and execute a strategy in line with their industrial environment, and the strategy has an influence on their economic performance. As such, the industrial organization theory proposes strategy as a mechanism (in the order environment > strategy > performance) that links the external environment to performance. From this viewpoint, it is believed that strategic prospecting can serve as a mediator (environmental dynamism > strategic prospecting > innovation performance) of the relationship between environmental dynamism and innovation performance.

2.4. Absorptive Capacity and Mediation Role, Based on Dynamic Capability Theory

Cohen and Levinthal [35] have initially defined absorptive capacity as “the ability of a firm to recognize the value of new, external knowledge, assimilate it, and apply it to commercial end” (p. 128). Based on this, Zahra and George [19] have further conceptualized absorptive capacity as a dynamic capability that creates and utilizes knowledge to enhance a firm’s ability to gain and sustain a competitive advantage, and these researchers have argued that absorptive capacity consists of the four innovative processes of acquiring, assimilating, transforming, and exploiting new external knowledge. Specifically, these processes include acquisition for identifying and acquiring useful external knowledge, assimilation for analyzing and interpreting new external knowledge in comparison with existing knowledge, transformation for combining new external knowledge with existing knowledge, and exploitation for commercializing and utilizing new knowledge. Based on the literature, we define absorptive capacity as a firm’s ability to acquire, assimilate, transform, and exploit new external knowledge.
The dynamic capability theory in strategic management argues that dynamic capability, which refers to a firm’s ability to develop new knowledge and capabilities through the process of integrating and reconfiguring internal and external knowledge to adapt to changes in the environment, is a critical source of competitive advantage [22]. The theory suggests that, in response to environmental changes, firms need to enhance dynamic capability to create new knowledge and skills, through which they can improve performance. As such, the dynamic capability theory proposes dynamic capability as a mechanism (in the order environment > capability > performance) to link the external environment to performance. In addition, the literature further suggests that environmental dynamism is a preceding factor which leads to the development of absorptive capacity [36]. Therefore, it is expected that absorptive capacity can play a role as a mediator (environmental dynamism > absorptive capacity > innovation performance) of the relationship between environmental dynamism and innovation performance.

2.5. Strategic Prospecting–Absorptive Capacity and Mediation Role, Based on Strategic Fit Perspective

The strategic fit perspective in strategic management argues that strategic fit or alignment, which means that environment, strategy, and capability are all linked, improves firms’ economic performance [21]. This perspective suggests that firms can improve performance through both external fit, which aligns strategy with the environment by devising a strategy in line with the environment, and internal fit, which aligns capability with strategy by developing a firm’s capability to support their strategy [37]. Besides, the strategic management perspective also suggests that firms can align the environment, strategy, and capability through the process of strategy formulation and implementation, thereby improving performance [9]. Thus, the strategic fit perspective proposes strategy and capability as a double sequential mechanism (in the order environment > strategy > capability > performance) that links the external environment to performance. Based on this perspective, strategic prospecting and absorptive capacity are expected to serve as a double sequential mediator (environmental dynamism > strategic prospecting > absorptive capacity > innovation performance) of the relationship between environmental dynamism and innovation performance.

3. Model and Hypotheses

The theoretical model of our study with all hypotheses is presented in Figure 1. In the first subsection, we theorize the effect of environmental dynamism on innovation performance in relation to the first research question. In the next subsection, we theorize the mediation effect of strategic prospecting on the relationship between environmental dynamism and innovation performance to deal with the second research question. In the following subsection, we theorize the mediation effect of absorptive capacity on the relationship between environmental dynamism and innovation performance in relation to the third research question. In the final subsection, we theorize the double sequential mediation effect of strategic prospecting and absorptive capacity on the relationship between environmental dynamism and innovation performance by addressing the last research question.

3.1. Environmental Dynamism and Innovation Performance

Environmental dynamism refers to the rate of change of various environmental factors over time [9]. Under a dynamic environment, firms will encounter a shift in technology and the market, a shorter product life cycle, unexpected competitor behavior, and other factors. In this circumstance, firms will be faced with the threat of the obsolescence of their existing products and markets, thereby requiring them to develop new products, markets, and technologies to cope with the threat [38]. Thus, when operating in a dynamic environment, firms are likely to focus on the innovation process of developing new products and markets [39], through which they can achieve improved innovation performance. Besides, prior studies have shown that environmental dynamism has a positive impact on innovation performance [10,11,12]. Therefore, it is expected that environmental dynamism is positively associated with innovation performance.
Hypothesis 1 (H1).
Environmental dynamism has a positive relationship with innovation performance.

3.2. Mediation Effect of Strategic Prospecting

The industrial organization theory claims that the industrial structure or the environment shapes firms’ strategy, which subsequently influences performance [18,34]. This theory suggests that firms’ strategies can link the external environment to performance. Following the rationale of this theory, we argue that strategic prospecting can mediate the relationship between environmental dynamism and innovation performance (environmental dynamism > strategic prospecting > innovation performance). First, environmental dynamism is expected to have a positive effect on strategic prospecting. As firms operate in a dynamic environment, they are bound to experience significant environmental changes, such as a shift in customer needs, technology, products, and the market, a reduced product life cycle, and unexpected competitor behavior [25]. Under this circumstance, firms tend to be motivated or willing to sensitively explore and respond to the initial signals of the new market needs and opportunities posed by environmental changes by pursuing new technologies, products, and markets more aggressively [17]. Thus, facing a dynamic environment, firms are likely to pursue a higher level of strategic prospecting to cope with environmental changes. Raubitschek [40] also argues that, under a dynamic environment, firms not only seek to explore and understand environmental changes but also tend to choose a strategic direction that will increase the likelihood of success of new products and markets required to respond to environmental changes effectively.
Next, strategic prospecting is expected to have a positive effect on firms’ innovation performance [32]. As firms pursue a higher level of strategic prospecting, they need to become more responsive to environmental changes by offering new products, markets, and technologies more proactively. Thus, firms with a higher level of strategic prospecting need to focus on the innovation process of developing new products, markets, and technologies, through which they eventually achieve enhanced innovation performance. For example, Apple, with a high level of strategic prospecting, pursues innovation aggressively by making large investments, thereby achieving a higher level of innovation performance as a result. Similarly, previous studies have revealed that firms that adopt the prospector strategy tend to produce improved innovation and innovation performance [32].
In summary, under a dynamic environment, firms are likely to pursue higher levels of strategic prospecting as a means of responding to environmental changes effectively, through which they are likely to eventually generate a higher level of innovation performance by enhancing the innovation process of developing new products, markets, and technologies. Based on the discussions above, we propose the following hypothesis.
Hypothesis 2 (H2).
Strategic prospecting will mediate the relationship between environmental dynamism and innovation performance.

3.3. Mediation Effect of Absorptive Capacity

The dynamic capability theory suggests that, to respond to environmental changes effectively, firms need to improve their dynamic capability to create valuable new knowledge and skills through which they can enhance their competitive advantage and performance. According to this theory, we argue that absorptive capacity, as with dynamic capability [19], can mediate the relationship between environmental dynamism and innovation performance (environmental dynamism > absorptive capacity > innovation performance). First, environmental dynamism is expected to increase firms’ absorptive capacity. Facing a dynamic environment, firms need to enhance their ability to absorb external knowledge to develop the new knowledge and skills required by the changes in the environment [36]. Operating in a dynamic environment, firms need to create new knowledge, skills, products, and markets to deal with the risk of the obsolescence of existing knowledge, skills, products, and markets due to environmental changes [39]. However, since firms will have difficulty in securing all the necessary knowledge internally [41], they tend to need to acquire new external knowledge through interactions with environmental factors [41]. Thus, under a dynamic environment, firms are likely to enhance absorptive capacity through investment to gain and utilize more external knowledge [19].
Next, it is further expected that absorptive capacity will contribute to improving innovation performance. Absorptive capacity is likely to promote innovation activities, such as developing new products, by successfully adding externally acquired knowledge to an existing knowledge base [42] and ultimately will have a positive influence on innovation performance [43]. According to the literature, a firm’s search for external knowledge generally seems to have a greater impact on their innovation or innovation performance than their search for internal knowledge [28,41]. This suggests that an absorptive capacity to acquire, assimilate, transform, and exploit new external knowledge will play a critical role in enhancing innovation or innovation performance [19]. In addition, with an increase in absorptive capacity, firms are more able to secure the external knowledge required to cope with environmental changes, and with new external knowledge, firms can renew and reinforce their accumulated knowledge base [44] and eventually improve their innovation performance [35].
In summary, operating in a dynamic environment, firms are likely to be motivated or willing to enhance their absorptive capacity to secure the new external knowledge required to deal with environmental changes, through which they can enhance their innovation performance by strengthening innovation activities with new external knowledge. Based on the discussions above, the following hypothesis is proposed.
Hypothesis 3 (H3).
Absorptive capacity will mediate the relationship between environmental dynamism and innovation performance.

3.4. Mediation Effect of Strategic Prospecting–Absorptive Capacity

According to the strategic fit perspective, firms can improve their competitive advantage and performance by achieving a strategic fit or alignment between the environment, strategy, and capability [35]. This suggests that firms can enhance their performance by aligning their strategy with the external environment and aligning internal capability with their strategy. Following this perspective, we argue that strategic prospecting and absorptive capacity can have a double sequential mediation effect on the relationship between environmental dynamism and innovation performance (environmental dynamism > strategic prospecting > absorptive capacity > innovation performance). First, as discussed in Hypothesis 2, environmental dynamism will have a positive effect on firms’ strategic prospecting. Operating in a dynamic environment, firms tend to experience significant changes in products, technologies, and customer needs [25] and be motivated or willing to sensitively explore and respond to the initial signals of these environmental changes by pursuing new products, markets, and technologies, thereby pursuing higher levels of strategic prospecting [17]. Second, strategic prospecting will have a positive influence on firms’ absorptive capacity. Firms with higher strategic prospecting levels tend to explore and respond to environmental changes more proactively by developing new products and markets. To do this, they are likely to need new knowledge and skills to develop new products and technologies, but they may not be able to secure all of them internally [41]. Thus, firms tend to rely on external knowledge and skills and strengthen their absorptive capacity [19]. Lastly, as described in Hypothesis 3, absorptive capacity will have a positive effect on firms’ innovation performance. Firms with enhanced absorptive capacity can create new knowledge and skills based on the external knowledge acquired, and they can reinforce their innovation activities with inputs of newly created knowledge and capabilities, thereby subsequently improving their innovation performance.
In summary, facing a dynamic environment, firms are likely to pursue higher levels of strategic prospecting by responding to environmental changes more proactively with the pursuit of new products and markets; then, firms with higher strategic prospecting levels tend to enhance their absorptive capacity to secure the new knowledge and skills needed to support their offensive strategic orientation; finally, firms with enhanced absorptive capacity, in turn, can improve their innovation performance with new knowledge and skills as critical inputs into the innovation process. In other words, it is expected that environmental dynamism will have a positive influence on firms’ innovation performance through the double sequential mediation of strategic prospecting and absorptive capacity. Based on these discussions, we propose the following hypothesis.
Hypothesis 4 (H4).
Strategic prospecting and absorptive capacity will sequentially mediate the relationship between environmental dynamism and innovation performance.

4. Methodology

4.1. Sample and Data Collection

The impact of environmental dynamism on firms’ innovation or innovation performance varies across firm sizes and industries [6], although innovation activities are carried out in firms of all sizes and are widely conducted in small and medium-sized firms [45]. We, therefore, collected data from small and medium-sized manufacturing firms with 20 to 299 employees listed in the Directory of Korean Enterprises by the Korea Economic Daily in 2019. In line with recommendations in Oslo Manual 2019 [45], we selected 15 four-digit manufacturing industries from the directory in consideration of the diversity of their average R&D intensity as reported in the Korea Innovation Survey 2018 [46] and classified them into seven three-digit industries related to food, chemical, fabricated metal products, communications equipment, precision equipment, electrical equipment, and special purpose machinery. Out of these industries, 1706 firms were chosen as our effective target population after firms with incorrect contact information, less than four years of operation, and no product development activities were excluded.
A survey questionnaire was used to collect data for our study. We first drafted a questionnaire based on the literature. We then pretested the questionnaire on five senior executives of SMEs in relevant industries to assess the clarity and appropriateness of the questions and revised it based on their feedback. We further conducted a pilot test of the revised questionnaire on 14 senior executives of SMEs in relevant industries to assess the distribution or pattern of their responses and amended the questionnaire accordingly. Before mailing out the finalized questionnaire for our main study, we confirmed the names and addresses of our target respondents—the heads of our target population—by phone. Based on Nunally’s [47] proposal for data collection, we sent mails to the heads of our target population three times with intervals of four weeks, followed by phone calls each time to ask for their participation in the survey. As a result, a total of 288 responses were retrieved, and 266 responses remained usable, with an effective response rate of 15.6%, after 22 substantially incomplete or insincerely filled-out surveys were excluded.
Regarding the characteristics of our sample firms, 23 (8.7%) had less than 5 million dollars in sales, 70 (26.3%) had 5–9.9 million dollars in sales, 146 (54.9%) had 10–49.9 million dollars in sales, and 27 (10.2%) had 50 million dollars and above in sales. Of our sample firms, 15%, 17.7%, 15%, 12%, 10.9%, 16.2%, and 13.2% were in the food, chemical, fabricated products, communications equipment, precision equipment, electrical equipment, and special purpose machinery industries, respectively. In addition, with respect to the characteristics of our respondents, 52.8% were presidents or vice presidents, 18.2% were directors, and 29% were department heads or below. Our respondents had been in their current positions for 12.7 years on average. Considering these characteristics, we believe that our respondents were in a position to provide accurate information for our questionnaire.
We checked for common method bias as our study relied on a single respondent from each company to collect data to measure both dependent and independent variables in our study at the same time [48]. For this purpose, we conducted the Harman’s one-factor test through a principal components analysis of all the variables included in our study, based on the work of Podsakoff and Organ [49]. This analysis derived a total of four factors with an eigenvalue of 1 or higher, and their distributed explanatory power was also shown evenly. Thus, it was very unlikely that our research results would be distorted by notable common method bias.
Furthermore, to examine non-response bias in our study, we performed a t-test to compare the two groups of early and late responses in terms of sales and the number of employees [50]. Early responses were those received from the first round of mailing, whereas late responses were those from the second and third rounds of mailing. As a result, no significant difference between the two groups in terms of sales (p = 0.555) and the number of employees (p = 0.454) was found. Thus, it was concluded that the possibility of non-response bias was very low in our study.

4.2. Measurement

4.2.1. Environmental Dynamism

Environmental dynamism, which means the rate of change in various environmental factors over time, was measured with a scale adapted from Jansen, Van Den Bosch, Volberda [51]. To measure this variable, we asked respondents to indicate the extent (1 = “strongly disagree” to 7 = “strongly agree”) to which they agreed or disagreed with each of the following items on a seven-point Rickert scale: “product technologies in our industry change quickly”, “environmental changes in our industry are intense”, “the tastes and preferences of customers in our industry change quickly”, “new products are frequently introduced in our industry”, and “the rate of change in our competitors’ strategic and tactical behavior in the market is very high”.

4.2.2. Strategic Prospecting

Strategic prospecting refers to a firm’s strategic orientation towards exploring and responding quickly and sensitively to the initial signals of the external environment by pursuing new products, markets, and technologies through risk-taking [17]. To measure this variable, we relied on a scale modified from Dyer and Song [52] and Conant, Mokwa, and Varadarajan [53]. Specifically, the question items included in this scale were as follows: “our firm spends significant amounts of time continuously monitoring the marketplace for changes and trends”, “the products we provide to our customers are innovative and continually changing”, “our organization has an image in the marketplace as a firm with a reputation for being innovative and creative”, “one of our firm’s key goals is the availability of the people, resources, and equipment required to develop new products and markets”, “our managerial employees exhibit competencies (skills) that are entrepreneurial, diverse, and flexible, enabling change to be created”, “the one thing that protects our organization from its competitors is that we are able to consistently develop new products and new markets”, “our management staff concentrates on developing new products, new markets, and new market segments more than many of our competitors”, “my organization identifies marketplace trends and opportunities that can result in product offerings new to the industry or able to reach new markets”, and “the structure of our organization is product or market-oriented”. For this measure, respondents were asked to indicate the extent (1 = “strongly disagree” to 7 = “strongly agree”) to which they agreed or disagreed with each of the items listed above.

4.2.3. Absorptive Capacity

Absorptive capacity refers to a firm’s ability to acquire, assimilate, transform, and exploit new external knowledge [19]. To measure this variable, we relied on a scale adapted from Pavlou and El Sawy [54]. Specifically, respondents were asked to indicate the extent (1 = “strongly disagree” to 7 = “strongly agree”) to which they agreed or disagreed with each of the following items: “we have the ability to effectively identify and acquire external technical and market knowledge/information”, “we can successfully identify, evaluate, and acquire new external technical and market knowledge/information”, “we can effectively analyze technical and market knowledge/information obtained externally”, “we have the ability to assimilate new technical and market knowledge/information acquired externally”, “we can successfully integrate our existing knowledge with the new technical and market knowledge/information acquired externally”, “we have the ability to transform existing knowledge into new technical and market knowledge”, “we can successfully exploit internal and external technical and market knowledge/information into concrete applications”, and “we have the ability to effectively utilize technical and market knowledge for new products”.

4.2.4. Innovation Performance

Based on the existing literature, innovation performance is defined as the degree of success in achieving corporate goals through a new product development program [30]. To measure this variable, we adopted the scale used by Song, Dyer, and Thieme [30] and Lichtenthaler [55]. Specifically, for this measure, we asked respondents to indicate the extent (1 = “strongly disagree” to 7 = “strongly agree”) to which they agreed or disagreed with each of the following items: “the overall performance of our new product development program has met our objectives”, “from an overall profitability standpoint, our new product development program has been successful”, and “compared with our major competitors, our overall new product development program is far more successful”.

4.2.5. Control Variables

We included industry type, firm size, firm age, R&D intensity, and venture certification as control variables in our model and controlled their effects on strategic prospecting, absorptive capacity, and innovation performance. Since the type of industry is likely to influence corporate innovation performance [56], we controlled for industry type by dummy-coding seven industries. Larger firms with more resources may have a higher investment capacity for corporate innovation performance than smaller firms with fewer resources [57], and so firm size was controlled for and measured as the number of employees. Older firms can accumulate knowledge and experiences that may improve corporate innovation performance more than younger firms [58], and so firm age was controlled for in our study and measured as the number of years of operation. Since R&D investment can influence corporate innovation performance, we controlled for R&D intensity in our study and measured it as R&D expenses as a percentage of sales. Venture-certified firms tend to focus on corporate innovation performance more than other firms [59], and so we controlled for venture certification and dummy coded venture-certified firms as “1” and other firms as “0”.

5. Results

5.1. Reliability and Validity

We performed a confirmatory factor analysis, using AMOS 25, to assess the reliability and validity of the measurement in our study based on factor loading, average variance extracted (AVE), composite reliability (CR), Cronbach’s Alpha, and discriminant validity. We first evaluated construct reliability using CR and Cronbach’s Alpha, and the results, as shown in Table 1, demonstrated a fairly high level of reliability that exceeded the recommended minimum value of 0.7 for both CR [60] and Cronbach’s Alpha [61]. The unidimensionality of our constructs was then evaluated based on their convergent and discriminant validity. As shown in Table 1, all the items were significantly loaded on their corresponding factors, with factor loadings greater than the cutoff value of 0.60, and the AVE for each scale was higher than the threshold of 0.5. These results indicated an adequate level of convergent validity [62]. We further evaluated the discriminant validity of our constructs with the inter-construct correlation matrix presented in Table 2. As shown in the matrix, the square root of AVE for each factor was greater than any of its correlations with other factors, and this confirmed satisfactory discriminant validity for all the factors [63]. Lastly, as noted in Table 2, the goodness-of-fit results for our CFA model showed an acceptable level of fit, with χ2 = 404.551, df = 183, p < 0.001, χ2/df = 2.211, CFI = 0.939, TLI = 0.929, RMSEA = 0.068 [62,64].

5.2. Tests of Hypotheses

5.2.1. Descriptive Statistics and Correlations

Means, standard deviations, and correlations among the variables are shown in Table 3. As expected, all correlations among latent variables were significant and positive, which was consistent with the presumed direction of the relationships between relevant variables presented in our hypotheses. More specifically, correlations were higher in the direct relationships between variables than in the indirect relationships, as hypothesized in our models. We calculated the variance inflation factor (VIF) for each of the regression equations to determine the presence of multicollinearity. The maximum VIF value in the models was 2.20, which was lower than the rule-of-thumb cutoff point of 10.

5.2.2. Parallel Multiple Mediator Model

Hierarchical Multiple Regression Analysis

Model 1 in Table 4 provides the results of the multiple regression analysis that examined the total effect of environmental dynamism on innovation performance, including all the control variables. As expected, the coefficient for environmental dynamism was positive and significant (b = 0.232, p = 0.000), thereby supporting Hypothesis 1. Among the control variables in Model 1, R&D intensity (b = 0.021, p = 0.014) and venture certification (b = 0.619, p = 0.000) had a significantly positive relationship with innovation performance, while firm size and firm age had no relationship with innovation performance.
Models 2, 3, and 4 in Table 4 present the results of the regression analysis, based on the causal step approach proposed by Baron and Kenny [65], for the mediation effects of strategic prospecting and absorptive capacity on the relationship between environmental dynamism and innovation performance, assuming that the two mediators are independent from each other. Models 2 and 3 revealed that environmental dynamism had a significantly positive effect on strategic prospecting (b = 0.432, p = 0.000) and absorptive capacity (b = 0.273, p = 0.000), respectively. As a final step of the mediation analysis, Model 4 showed that the effects of both strategic prospecting (b = 0.381, p = 0.000) and absorptive capacity (b = 0.241, p = 0.000) on innovation performance were still positive and significant after controlling for the effect of environmental dynamism on innovation performance. However, the direct effect of environmental dynamism on innovation performance was no longer statistically significant. These results suggested that strategic prospecting and absorptive capacity completely mediated the relationship between environmental dynamism and innovation performance [65].

Statistical Inference about Mediation Effects

The causal step approach for mediation analysis proposed by Baron and Kenny [65] neither formally quantifies the indirect effect nor requires any kind of inferential test. Therefore, in order to statistically estimate and compare the indirect effects presented in our parallel multiple mediator model, we applied the bootstrap confidence interval approach by calculating the lower limit confidence interval (LLCI) and upper limit confidence interval (ULCI) of a 95% bootstrap confidence interval for indirect effects from 5000 bootstrap samples, using a path analysis modeling tool, PROCESS Macro for SPSS v. 3.14 [66].
Table 5 reports the results of the bootstrap significance test for total, indirect, and direct effects, respectively. The total effect (b = 0.232, CI = 0.114∼0.349), indirect effect through strategic prospecting (b = 0.165, CI = 0.096∼0.254), and indirect effect through absorptive capacity (b = 0.066, CI = 0.027∼0.124) were all positive and significant, except the direct effect (b = 0.001, CI = −0.107∼0.110). These results were consistent with the findings in hierarchical multiple regression analysis. Therefore, Hypotheses 2 and 3 were both supported. Strategic prospecting and absorptive capacity were found to be the effective mechanisms or mediators through which environmental dynamism influenced innovation performance positively, assuming no interrelationship between the two mechanisms. All these results are summarized in Figure 2.
In addition, we conducted pairwise comparisons for the two indirect effects presented in our model to determine whether one effect was statistically different from the other in terms of strength. As indicated in Table 5, by generating bootstrap confidence intervals for all possible pairwise contrasts between two indirect effects, we found that the indirect effect of strategic prospecting was stronger than the indirect effect through absorptive capacity, and the difference in strength was statistically significant (△b = 0.099, CI = 0.007∼0.208).

5.2.3. Serial Multiple Mediator Model

The parallel multiple mediation analysis conducted above was based on the assumption that the two mediators had no causal interrelationship. In reality, however, strategic prospecting and absorptive capacity are bound to form a causal interrelationship, as discussed in Hypothesis 4. In fact, they were found to be highly correlated in our study (0.664, p < 0.005). Therefore, we established a serial multiple mediator model (environmental dynamism > strategic prospecting > absorptive capacity > innovation performance) to test Hypothesis 4, assuming a causal association between the two mediators, that represents the reality much better. As reported in Table 6, the indirect effect through both strategic prospecting and absorptive capacity in series was significantly positive (b = 0.070, CI = 0.031∼0.122), providing support for Hypothesis 4, which posits that strategic prospecting and absorptive capacity will sequentially mediate the relationship between environmental dynamism and innovation performance.
The serial multiple mediator model presented in Table 6 contains two additional indirect effects and one direct effect estimated as products of regression coefficients linking environmental dynamism to innovation performance. While the indirect effect through strategic prospecting was still statistically significant (b = 0.165, CI = 0.095∼0.259), both the indirect effect through absorptive capacity (b = −0.004, CI = −0.034∼0.023) and the direct effect of environmental dynamism on innovation performance (b = 0.001, CI = −0.107∼0.110) were no longer significant. Thus, we could conclude that the impact of environmental dynamism on innovation performance was completely mediated by two different mechanisms in the serial multiple mediator model, namely indirect effect 1 and indirect effect 3—a new path identified from the strategic fit perspective. All these results are summarized in Figure 3.
In addition, pairwise comparisons between two indirect effects further demonstrated that the difference in strength between indirect effect 1 and indirect effect 3 was not statistically significant (△b = 0.095, CI = −0.003∼0.202). This suggests that indirect effect 3 (through strategic prospecting–absorptive capacity) is as important a path as indirect effect 1 (through strategic prospecting) in connecting environmental dynamism with innovation performance. This further implies that absorptive capacity is a critical internal factor for supporting firms’ increased strategic prospecting.

6. Conclusions and Implications

6.1. Conclusions

Our study has focused on investigating the mechanisms linking environmental dynamism to innovation performance for firms’ sustainable growth. Specifically, based on theories of strategic management, we have identified strategic prospecting, absorptive capacity, and strategic prospecting–absorptive capacity as mediating mechanisms and examined their mediation effects on the relationship between environmental dynamism and innovation performance. For this purpose, we first analyzed the total and direct effects of environmental dynamism on innovation performance and then analyzed the mediation effects of strategic prospecting, absorptive capacity, and strategic prospecting–absorptive capacity on that relationship. Our key conclusions are as follows.
Our results show that a total effect of environmental dynamism on innovation performance exists, meaning that a dynamic environment tends to motivate or lead firms to improve their innovation performance. However, the direct effect does not exist when mediating variables are controlled. Thus, these findings suggest that the relationship between environmental dynamism and innovation performance is completely mediated by the intervening mechanisms.
Assuming an independent relationship between the mediators (strategic prospecting and absorptive capacity), strategic prospecting is found to mediate the relationship between environmental dynamism and innovation performance. This indicates that a dynamic environment tends to increase the level of strategic prospecting, which subsequently enhances innovation performance. This finding supports the argument of the industrial organization theory. Likewise, absorptive capacity is also found to mediate that relationship. Namely, a dynamic environment tends to motivate or force firms to enhance their absorptive capacity for external knowledge acquisition and utilization, which in turn improves innovation performance. This finding is consistent with the rationale of the dynamic capability theory.
Under the more realistic assumption that the mediators are causally interrelated, strategic prospecting still has a mediation effect on the relationship between environmental dynamism and innovation performance, while absorptive capacity does not, in contrast to the situation when the mediators are assumed to be independent. In addition, strategic prospecting–absorptive capacity has a double sequential mediation effect on that relationship. This means that, to respond to a dynamic environment effectively, firms are likely to exhibit higher levels of strategic prospecting, which tends to reinforce their absorptive capacity to secure and utilize external knowledge, and enhanced absorptive capacity is likely to improve innovation performance. Therefore, assuming a causally interdependent relationship between the mediators, strategic prospecting individually mediates the relationship between environmental dynamism and innovation performance, while absorptive capacity does not individually do so, but rather mediates that relationship only when it is linked to strategic prospecting (strategic prospecting–absorptive capacity) as suggested by the strategic fit perspective. This further suggests that, as a mechanism linking environmental dynamism to innovation performance, strategic prospecting is primarily important, whereas absorptive capacity in conjunction with strategic prospecting is secondarily important. As such, assuming an interrelationship between the mediators, our study has developed two effective paths that connect environmental dynamism with improved innovation performance: (1) facing a dynamic environment, firms can improve innovation performance through the pursuit of higher-level strategic prospecting, and (2) facing a dynamic environment, firms can further improve innovation performance through the enhancement of absorptive capacity in support of higher-level strategic prospecting.

6.2. Implications

Our study has the following important theoretical contributions. First, unlike existing studies that have primarily examined the direct effect of environmental dynamism on firms’ innovation performance, our study investigates the indirect effect of environmental dynamism on innovation performance through such mechanisms as strategic prospecting, absorptive capacity, and strategic prospecting–absorptive capacity. Namely, our study makes an original contribution to the literature by examining whether these mechanisms mediate the relationship between environmental dynamism and innovation performance to aid in the creation of a firm’s sustainable competitive advantage. Second, our study suggests that the industrial organization theory and the strategic fit perspective can explain the indirect effect of environmental dynamism on innovation performance better than the dynamic capability theory. This is inferred from our results that strategic prospecting, based on the industrial organization theory, and strategic prospecting–absorptive capacity, based on the strategic fit perspective, have a strong mediation effect on the relationship between environmental dynamism and innovation performance, while absorptive capacity, based on the dynamic capability theory, does not. Third, existing studies argue for a direct effect of environmental dynamism on innovation performance [3,5,7,8,9,10,11,12,13,14,15,16], but our study suggests that this may not be necessarily the case. Our study reveals that strategic prospecting and strategic prospecting–absorptive capacity completely mediate the relationship between environmental dynamism and innovation performance, as a significant direct effect of environmental dynamism on innovation performance is eliminated when the mediators are considered. This further suggests that the direct effect of environmental dynamism on innovation performance shown in many existing studies may be spurious in nature and may not in fact have been present.
In addition, our study provides important practical implications for firms under a dynamic environment regarding how to improve their innovation performance for their sustainable competitive advantage. By revealing the lack of a direct effect of environmental dynamism on innovation performance, our study demonstrates to managers that dynamic changes in the environment, such as the market [67], technology [68], and government policy [69], are not necessarily or naturally linked to improved innovation performance. Rather, our study clearly shows that firms operating in a dynamic environment need to intentionally identify and utilize specific mechanisms through which they can enhance innovation performance for their sustainable growth. Specifically, our results suggest to managers that, facing dynamic environmental changes, firms can choose two specific paths to improve innovation performance required for their sustainability. The first path is through strategic prospecting: facing a dynamic environment, firms need to pursue higher levels of strategic prospecting, namely a more offensive strategic orientation, through which to improve innovation performance. The second path is through strategic prospecting–absorptive capacity: facing dynamic changes in the environment, firms need to pursue higher levels of strategic prospecting and sequentially strengthen their absorptive capacity, which is associated with a more offensive strategic orientation to further improve their innovation performance. Our results also show that firms in a dynamic environment need not reinforce absorptive capacity alone, but instead need to strengthen absorptive capacity in conjunction with higher-level strategic prospecting in order to further improve their innovation performance for their sustainable competitive advantage.

6.3. Limitations and Future Research Directions

Our study has the following limitations, which may suggest the need for possible future research. First, since our study targeted small and medium-sized manufacturing firms as a research context, this might limit the generalization of our results. Thus, it seems desirable to expand the research context to services and larger firms to verify the generalizability of our results in future studies. Second, since our study collected data related to independent and dependent variables from a single respondent in each sample firm, the possibility of common method bias may exist. To check for this potential bias, we employed Harman’s one-factor test, which showed little evidence of this bias. However, since Harman’s one-factor test has its own limitations [45], the possibility of common method bias might not be completely ruled out. It therefore seems desirable to obtain data from multiple respondents in future studies. Third, although absorptive capacity was measured as a single construct in our study, it would be meaningful to measure it multidimensionally and consider how the roles of subdimensions like potential and realized absorptive capacity [17] might vary in linking environmental dynamism to innovation performance. Fourth, our study examined absorptive capacity (in connection with strategic prospecting) as a mechanism for mediating between environmental dynamism and innovation performance, but it would also be meaningful for future studies to investigate other potentially intervening internal factors such as organizational structure, culture, and leadership (in conjunction with strategic prospecting); namely, strategic prospecting–organizational structure, strategic prospecting–organizational culture, and strategic prospecting–strategic leadership.

Author Contributions

Conceptualization: E.-H.S.; methodology: E.-H.S. and C.-Y.K.; validation: K.K.; formal analysis: E.-H.S.; investigation: E.-H.S.; resources: E.-H.S.; writing—original draft: E.-H.S.; writing—review and editing: K.K. and C.-Y.K.; visualization: C.-Y.K.; supervision: K.K. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by Konkuk University partially, grant number 2018-A019-0596.

Conflicts of Interest

The authors declare no conflict of interest.

Appendix A

Table A1. Literature reviews on the relationship between environmental dynamism and innovation or innovation performance. SMEs: small and medium-sized enterprises.
Table A1. Literature reviews on the relationship between environmental dynamism and innovation or innovation performance. SMEs: small and medium-sized enterprises.
Author(s)Dependent Variable(s)Independent Variable(s)Mediating Variable(s)ResultSample
Calantone, Harmancioglu & Droge [3]New product innovationEnvironmental turbulence:
- Market (+)
- Technological (+)
+
x
Meta-analysis
Dhir, Aniruddha & Mital [4]Innovation performanceEnvironmental dynamism (+)Alliance network heterogeneity Conceptual
Khan & Manopichetwattana [5]Product innovationEnvironmental dynamism (+) +211 manufacturing firms
Kim, Li, Yoo, and Kim [6]InnovationEnvironmental dynamismExternal knowledge acquisition (EKA)x220 manufacturing SMEs in China
Lee [7]Product innovationEnvironmental turbulence:
- Market (+)
- Technological (+)
x
+
140 multinational firms in China
Martinez-Conesa, Soto-Acosta & Carayannis [8]Open innovationEnvironmental dynamism (+) +429 SMEs manufacturing in Spain
Miller & Friesen [9]InnovationEnvironmental dynamism (+) +128 Canadian & US firms
Mohammad, Idris, & Moh’d AL-Ferokh [10]Innovation performanceEnvironmental turbulence (+) +150 responses from 13 five-star hotels in Jordan,
Pervan, Al-Ansaari & Xu [11]InnovationMarket dynamism (+) +200 SMEs in Dubai
Thornhill [12]InnovationIndustry dynamism (+) +41,030 firms in Canada
Tuominen et al. [13]Innovation–new product development–commercializationEnvironmental dynamism:
- Technology-based (+,+)
- Market-based (+,+)
+, x
x, x
140 manufacturing firms in Finland
Turulja & Bajgoric [14]Innovation:
Product–process
Environmental turbulence (+,+) +, +427 firms in Europe
Soto-Acosta, Popa, & Martinez-Conesa [15]Innovation: Mari–radical–incrementalEnvironmental dynamism (+) +429 SMEs in Spain
Tsuja & Marino [16]Technical innovationEnvironmental dynamism +104 service firms in Peru

References

  1. Pyka, A.; Bogner, K.; Urmetzer, S. Productivity Slowdown, Exhausted Opportunities and the Power of Human Ingenuity—Schumpeter Meets Georgescu-Roegen. J. Open Innov. Technol. Mark. Complex. 2019, 5, 39. [Google Scholar] [CrossRef] [Green Version]
  2. Yun, J.J.; Won, D.; Park, K. Dynamics from open innovation to evolutionary change. J. Open Innov. Technol. Mark. Complex. 2016, 2, 1–22. [Google Scholar] [CrossRef] [Green Version]
  3. Calantone, R.J.; Harmancioglu, N.; Droge, C. Inconclusive innovation “returns”: A meta-analysis of research on innovation in new product development. J. Prod. Innov. Manag. 2010, 27, 1065–1081. [Google Scholar] [CrossRef]
  4. Dhir, S.; Aniruddha, N.; Mital, A. Alliance network heterogeneity, absorptive capacity and innovation performance: A framework for mediation and moderation effects. Int. J. Strat. Bus. Alliances 2014, 3, 168. [Google Scholar] [CrossRef]
  5. Khan, A.M.; Manopichetwattana, V. Innovative and Noninnovative Small Firms: Types and Characteristics. Manag. Sci. 1989, 35, 597–606. [Google Scholar] [CrossRef]
  6. Kim, K.; Li, F.; Yoo, J.W.; Kim, C.Y. The Relationships among Environments, External Knowledge Acquisition, and Innovation. Sustainability 2020, 12, 5541. [Google Scholar] [CrossRef]
  7. Lee, R.P. Extending the Environment–Strategy–Performance Framework: The Roles of Multinational Corporation Network Strength, Market Responsiveness, and Product Innovation. J. Int. Mark. 2010, 18, 58–73. [Google Scholar] [CrossRef]
  8. Martinez-Conesa, I.; Soto-Acosta, P.; Carayannis, E.G. On the path towards open innovation: Assessing the role of knowledge management capability and environmental dynamism in SMEs. J. Knowl. Manag. 2017, 21, 553–570. [Google Scholar] [CrossRef]
  9. Miller, D.; Friesen, P.H. Strategy-making and environment: The third link. Strat. Manag. J. 1983, 4, 221–235. [Google Scholar] [CrossRef]
  10. Nuiami, M.A.; Idris, W.M.S.; Al-Ferokh, F.A.M.; Abu Joma, M.H.M. An Empirical Study of the Moderator Effect of Entrepreneurial Orientation on the Relationship between Environmental Turbulence and Innovation Performance in Five-star Hotels in Jordan. Int. J. Bus. Adm. 2014, 5, p111. [Google Scholar] [CrossRef]
  11. Pervan, S.J.; Al-Ansaari, Y.; Xu, J. Environmental determinants of open innovation in Dubai SMEs. Ind. Mark. Manag. 2015, 50, 60–68. [Google Scholar] [CrossRef]
  12. Thornhill, S. Knowledge, innovation and firm performance in high- and low-technology regimes. J. Bus. Ventur. 2006, 21, 687–703. [Google Scholar] [CrossRef]
  13. Tuominen, M.; Rajala, A.; Moller, K.; Anttila, M. Assessing innovativeness through organisational adaptability: A contingency approach. Int. J. Technol. Manag. 2003, 25, 643. [Google Scholar] [CrossRef]
  14. Turulja, L.; Bajgoric, N. Innovation, firms performance and environmental turbulence: Is there a moderator or mediator? Eur. J. Innov. Manag. 2019, 22, 213–232. [Google Scholar] [CrossRef]
  15. Soto-Acosta, P.; Popa, S.; Martinez-Conesa, I. Information technology, knowledge management and environmental dynamism as drivers of innovation ambidexterity: A study in SMEs. J. Knowl. Manag. 2018, 22, 824–849. [Google Scholar] [CrossRef]
  16. Tsuja, P.Y.; Mariño, J.O.; Ostos, J. The Influence of the Environment on Organizational Innovation in Service Companies in Peru. Rev. Bus. Manag. 2013, 15, 582–600. [Google Scholar] [CrossRef] [Green Version]
  17. Miles, R.E.; Snow, C.C. Organizational Strategy, Structure, and Process; McGraw-Hill: New York, NY, USA, 1978. [Google Scholar]
  18. Porter, M.E. The contributions of industrial organization to strategic management. Acad. Manag. Rev. 1981, 6, 609–620. [Google Scholar]
  19. Zahra, S.A.; George, G. Absorptive capacity: A review, reconceptualization, and extension. Acad. Manag. Rev. 2002, 27, 185–203. [Google Scholar] [CrossRef] [Green Version]
  20. Teece, D.J.; Pisano, G.; Shuen, A. Dynamic capabilities and strategic management. Strateg. Manag. J. 1997, 18, 509–533. [Google Scholar] [CrossRef]
  21. Lin, C.-S.; Peng, T.-J.A.; Chang, R.-Y.; Dang, V.T. Dynamics of external fit and internal fit: Case of electronics industry. Chin. Manag. Stud. 2016, 10, 184–203. [Google Scholar] [CrossRef]
  22. Venkatraman, N. The concept of fit in strategy research: Toward verbal and statistical correspondence. Acad. Manag. Rev. 1989, 14, 423–444. [Google Scholar] [CrossRef]
  23. Wijbenga, F.H.; Van Witteloostuijn, A. Entrepreneurial locus of control and competitive strategies—The moderating effect of environmental dynamism. J. Econ. Psychol. 2007, 28, 566–589. [Google Scholar] [CrossRef]
  24. Volberda, H.W.; Van Bruggen, G.H. Environmental Turbulence: A look into its Dimensionality. In ERIM (Electronic) Books and Chapters; Nederlandse Organisatie voor Bedrijfskundig Onderzoek: Enschede, The Netherlands, 1997. [Google Scholar]
  25. Dess, G.G.; Beard, D.W. Dimensions of Organizational Task Environments. Adm. Sci. Q. 1984, 29, 52. [Google Scholar] [CrossRef]
  26. Teece, D.J. Firm organization, industrial structure, and technological innovation. J. Econ. Behav. Organ. 1996, 31, 193–224. [Google Scholar] [CrossRef] [Green Version]
  27. Jiménez-Jiménez, D.; Sanz-Valle, R. Innovation, organizational learning, and performance. J. Bus. Res. 2011, 64, 408–417. [Google Scholar] [CrossRef]
  28. Laursen, K.; Salter, A. Open for innovation: The role of openness in explaining innovation performance among U.K. manufacturing firms. Strat. Manag. J. 2006, 27, 131–150. [Google Scholar] [CrossRef]
  29. Chandy, R.K.; Tellis, G.J. The incumbent’s curse? Incumbency, size, and radical product innovation. J. Mark. 2000, 64, 1–17. [Google Scholar] [CrossRef]
  30. Song, M.; Dyer, B.; Thieme, R.J. Conflict Management and Innovation Performance: An Integrated Contingency Perspective. J. Acad. Mark. Sci. 2006, 34, 341–356. [Google Scholar] [CrossRef]
  31. Atuahene-Gima, K. An exploratory analysis of the impact of market orientation on new product performance a contingency approach. J. Prod. Innov. Manag. 1995, 12, 275–293. [Google Scholar] [CrossRef]
  32. Kickul, J.; Gundry, L. Prospecting for Strategic Advantage: The Proactive Entrepreneurial Personality and Small Firm Innovation. J. Small Bus. Manag. 2002, 40, 85–97. [Google Scholar] [CrossRef]
  33. Shortell, S.M.; Zajac, E.J. Perceptual and archival measures of Miles and Snow’s strategic types: A comprehensive assessment of reliability and validity. Acad. Manag. J. 1990, 33, 817–832. [Google Scholar]
  34. Porter, M.E. Competitive Strategy: Techniques for Analyzing Industries and Competitors; The Free Press: New York, NY, USA, 1980. [Google Scholar]
  35. Cohen, W.M.; Levinthal, D.A. Absorptive Capacity: A New Perspective on Learning and Innovation. Adm. Sci. Q. 1990, 35, 128. [Google Scholar] [CrossRef]
  36. Eisenhardt, K.M.; Martin, J.A. Dynamic capabilities: What are they? Strateg. Manag. J. 2000, 21, 1105–1121. [Google Scholar] [CrossRef]
  37. Kodama, F. Learning Mode and Strategic Concept for the 4th Industrial Revolution. J. Open Innov. Technol. Mark. Complex. 2018, 4, 32. [Google Scholar] [CrossRef] [Green Version]
  38. Ferreras-Méndez, J.L.; Newell, S.; Fernández-Mesa, A.; Alegre, J. Depth and breadth of external knowledge search and performance: The mediating role of absorptive capacity. Ind. Mark. Manag. 2015, 47, 86–97. [Google Scholar] [CrossRef]
  39. Naqshbandi, M.M.; Kaur, S.; Ma, P. What organizational culture types enable and retard open innovation? Qual. Quant. 2015, 49, 2123–2144. [Google Scholar] [CrossRef]
  40. Raubitschek, R.S. Multiple scenario analysis and business planning. Adv. Strateg. Manag. 1988, 5, 181–205. [Google Scholar]
  41. Chesbrough, H.W. Open Innovation: The New Imperative for Creating and Profiting from Technology; Harvard Business School Press: Boston, MA, USA, 2003. [Google Scholar]
  42. Tang, Z.; Hull, C.E.; Rothenberg, S. How Corporate Social Responsibility Engagement Strategy Moderates the CSR-Financial Performance Relationship. J. Manag. Stud. 2012, 49, 1274–1303. [Google Scholar] [CrossRef]
  43. Lane, P.J.; Koka, B.R.; Pathak, S. The Reification of Absorptive Capacity: A Critical Review and Rejuvenation of the Construct. Acad. Manag. Rev. 2006, 31, 833–863. [Google Scholar] [CrossRef]
  44. Gangi, F.; Mustilli, M.; Varrone, N. The impact of corporate social responsibility (CSR) knowledge on corporate financial performance: Evidence from the European banking industry. J. Knowl. Manag. 2019, 23, 110–134. [Google Scholar] [CrossRef]
  45. OECD. Oslo Manual 2018: Guidelines for Collecting, Reporting and Using Data on Innovation, 4th ed.; The Measurement of Scientific, Technological and Innovation Activities; OECD Publishing: Luxembourg, 2019. [Google Scholar]
  46. Science and Technology Policy Institute. Report on the Korean Innovation Survey 2018: Manufacturing Sector; Science and Technology Policy Institute: Seoul, Korea, 2018. [Google Scholar]
  47. Hundleby, J.D.; Nunnally, J. Psychometric Theory. Am. Educ. Res. J. 1968, 5, 431. [Google Scholar] [CrossRef]
  48. Podsakoff, P.M.; MacKenzie, S.B.; Lee, J.-Y.; Podsakoff, N.P. Common method biases in behavioral research: A critical review of the literature and recommended remedies. J. Appl. Psychol. 2003, 88, 879–903. [Google Scholar] [CrossRef]
  49. Podsakoff, P.M.; Organ, D.W. Self-Reports in Organizational Research: Problems and Prospects. J. Manag. 1986, 12, 531–544. [Google Scholar] [CrossRef]
  50. Bodlaj, M.; Čater, B. The Impact of Environmental Turbulence on the Perceived Importance of Innovation and Innovativeness in SMEs. J. Small Bus. Manag. 2019, 57, 417–435. [Google Scholar] [CrossRef]
  51. Jansen, J.J.P.; Bosch, F.A.J.V.D.; Volberda, H.W. Exploratory Innovation, Exploitative Innovation, and Performance: Effects of Organizational Antecedents and Environmental Moderators. Manag. Sci. 2006, 52, 1661–1674. [Google Scholar] [CrossRef] [Green Version]
  52. Dyer, B.; Song, X.M. The Impact of Strategy on Conflict: A Cross- National Comparative Study of U.S. and Japanese firms. J. Int. Bus. Stud. 1997, 28, 467–493. [Google Scholar] [CrossRef]
  53. Conant, J.S.; Mokwa, M.P.; Varadarajan, P.R. Strategic types, distinctive marketing competencies and organizational performance: A multiple measures-based study. Strat. Manag. J. 1990, 11, 365–383. [Google Scholar] [CrossRef]
  54. Pavlou, P.A.; El Sawy, O.A. From IT Leveraging Competence to Competitive Advantage in Turbulent Environments: The Case of New Product Development. Inf. Syst. Res. 2006, 17, 198–227. [Google Scholar] [CrossRef]
  55. Lichtenthaler, U. Absorptive Capacity, Environmental Turbulence, and the Complementarity of Organizational Learning Processes. Acad. Manag. J. 2009, 52, 822–846. [Google Scholar] [CrossRef]
  56. Sidhu, J.S.; Commandeur, H.R.; Volberda, H.W. The Multifaceted Nature of Exploration and Exploitation: Value of Supply, Demand, and Spatial Search for Innovation. Organ. Sci. 2007, 18, 20–38. [Google Scholar] [CrossRef]
  57. Lubatkin, M.H.; Simsek, Z.; Ling, Y.; Veiga, J.F. Ambidexterity and Performance in Small-to Medium-Sized Firms: The Pivotal Role of Top Management Team Behavioral Integration. J. Manag. 2006, 32, 646–672. [Google Scholar] [CrossRef] [Green Version]
  58. Sorensen, J.B.; Stuart, T.E. Aging, Obsolescence, and Organizational Innovation. Adm. Sci. Q. 2000, 45, 81. [Google Scholar] [CrossRef] [Green Version]
  59. Lichtenthaler, U. Retracted:Technological Turbulence and the Impact of Exploration and Exploitation Within and Across Organizations on Product Development Performance. Entrep. Theory Pract. 2012, 4, 109. [Google Scholar] [CrossRef]
  60. Anderson, J.C.; Gerbing, D.W. Structural equation modeling in practice: A review and recommended two-step approach. Psychol. Bull. 1988, 103, 411–423. [Google Scholar] [CrossRef]
  61. Nunnally, J.C. Psychometric Theory; McGraw-Hill: New York, NY, USA, 1967. [Google Scholar]
  62. Hair, J.; Anderson, R.; Tatham, R.; Black, W. Multivariate Data Analysis, 5th ed.; Prentice Hall: Upper Saddle River, NJ, USA, 1998. [Google Scholar]
  63. Fornell, C.; Larcker, D.F. Evaluating structural equation models with unobservable variables and measurement error. J. Mark. Res. 1981, 18, 39–50. [Google Scholar] [CrossRef]
  64. Bentler, P.M.; Chou, C.-P. Practical Issues in Structural Modeling. Sociol. Methods Res. 1987, 16, 78–117. [Google Scholar] [CrossRef]
  65. Baron, R.M.; Kenny, D.A. The moderator–mediator variable distinction in social psychological research: Conceptual, strategic, and statistical considerations. J. Pers. Soc. Psychol. 1986, 51, 1173–1182. [Google Scholar] [CrossRef]
  66. Hayes, A.F. Introduction to Mediation, Moderation, and Conditional Process Analysis: A Regression-Based Approach, 2nd ed.; Guilford Press: New York, NY, USA, 2017. [Google Scholar]
  67. Yun, J.J. How do we conquer the growth limits of capitalism? Schumpeterian Dynamics of Open Innovation. J. Open Innov. Technol. Mark. Complex. 2015, 1, 1–20. [Google Scholar] [CrossRef] [Green Version]
  68. Rasiah, R. Building Networks to Harness Innovation Synergies: Towards an Open Systems Approach to Sustainable Development. J. Open Innov. Technol. Mark. Complex. 2019, 5, 70. [Google Scholar] [CrossRef] [Green Version]
  69. Lee, M.; Yun, J.J.; Pyka, A.; Won, D.; Kodama, F.; Schiuma, G.; Park, H.; Jeon, J.; Park, K.; Jung, K.; et al. How to Respond to the Fourth Industrial Revolution, or the Second Information Technology Revolution? Dynamic New Combinations between Technology, Market, and Society through Open Innovation. J. Open Innov. Technol. Mark. Complex. 2018, 4, 21. [Google Scholar] [CrossRef] [Green Version]
Figure 1. Theoretical model.
Figure 1. Theoretical model.
Sustainability 12 09999 g001
Figure 2. Parallel multiple mediation analysis. * p < 0.10; *** p < 0.01.
Figure 2. Parallel multiple mediation analysis. * p < 0.10; *** p < 0.01.
Sustainability 12 09999 g002
Figure 3. Serial multiple mediation analysis. * p < 0.10; *** p < 0.01.
Figure 3. Serial multiple mediation analysis. * p < 0.10; *** p < 0.01.
Sustainability 12 09999 g003
Table 1. Results of confirmatory factor analysis. AVE: average variance extracted; CR: composite reliability.
Table 1. Results of confirmatory factor analysis. AVE: average variance extracted; CR: composite reliability.
FactorsItemsβFactor LoadingS.E.t-Value
(C.R.)
SMCAVECRCronbach’s α
Environmental
Dynamism
D11.0000.701 *** 0.4910.5870.8760.874
D21.0860.736 ***0.09910.9590.542
D31.2750.850 ***0.10312.4070.722
D41.2900.799 ***0.10911.8090.639
D51.1570.737 ***0.10510.9750.543
Strategic
Prospecting
S21.0000.731 *** 0.5340.5450.9050.904
S30.9950.709 ***0.08811.3610.502
S40.8370.656 ***0.08010.4740.430
S50.9400.693 ***0.08511.0900.480
S60.9710.696 ***0.08711.1520.485
S71.0580.783 ***0.08412.6160.613
S81.0590.837 ***0.07813.5310.701
S91.0130.783 ***0.08012.6070.612
Absorptive
Capacity
AC31.0000.788 *** 0.6210.7250.9290.929
AC51.0620.833 ***0.07015.2150.694
AC61.1610.872 ***0.07216.1660.760
AC71.1280.889 ***0.06816.6050.791
AC81.1630.872 ***0.07216.1830.761
Innovation
Performance
IN11.0000.715 *** 0.5110.6590.8520.846
IN21.2830.870 ***0.10112.7020.756
IN31.2820.842 ***0.10312.4810.709
χ2 = 404.551, df = 183, p < 0.001, χ2/df = 2.211, CFI = 0.939, TLI = 0.929, RMSEA = 0.068. *** p < 0.01.
Table 2. Analysis of discriminant validity.
Table 2. Analysis of discriminant validity.
CRAVE1234
1. Environmental Dynamism0.8760.5870.766
2. Strategic Prospecting0.9050.5450.4350.738
3. Absorptive Capacity0.9290.7250.2630.7320.852
4. Innovation Performance0.8520.6590.2160.6740.5940.812
Note: Diagonal elements in italics are the square roots of AVEs; off-diagonal elements are correlations between the constructs in the inner model.
Table 3. Descriptive statistics and Correlations.
Table 3. Descriptive statistics and Correlations.
VariablesMeanSD1234567
1Innovation Performance4.760.9210.232 **0.601 **0.543 **−0.134 *0.0550.154 *
2Environmental Dynamism4.871.06 10.419 **0.258 **−0.178 **0.0410.059
3Strategic Prospecting5.140.88 10.664 **−0.105**0.0180.092
4Absorptive Capacity5.090.90 1−0.1150.0160.162 **
5Firm age21.6613.45 10.205 **0.091
6Firm size70.0459.70 10.056
7R&D Intensity8.207.19 1
SD: Standard deviation; * p < 0.05; ** p < 0.01.
Table 4. Results of multiple regression analyses.
Table 4. Results of multiple regression analyses.
Dependent
Variables
Model 1Model 2Model 3Model 4
Innovation
Performance
Strategic ProspectingAbsorptive
Capacity
Innovation
Performance
VariablesB(SE)B(SE)B(SE)B(SE)
Firm age−0.007
(0.004)
−0.002
(0.004)
−0.005
(0.005)
−0.005
(0.004)
Firm size0.002
(0.001)
0.000
(0.001)
0.000
(0.001)
0.001 *
(0.001)
R&D intensity0.021 **
(0.008)
0.012
(0.008)
0.020 *
(0.009)
0.011
(0.007)
Venture certification0.619 ***
(0.126)
0.459 ***
(0.122)
0.192
(0.132)
0.397 ***
(0.108)
Environmental
Dynamism
0.232 ***
(0.060)
0.432 ***
(0.058)
0.273 ***
(0.062)
0.001
(0.055)
Strategic
Prospecting
0.381 ***
(0.069)
Absorptive
Capacity
0.241 ***
(0.064)
R20.2060.2620.1330.455
Adj-R20.1720.2300.0950.427
F5.995 ***8.178 ***3.542 ***16.171 ***
Note: The table provides parameter estimates; standard errors are in parentheses. The estimated effects of six industry dummies on dependent variables are not reported in Table 2 due to limitations of space. * p < 0.10; ** p < 0.05; *** p < 0.01.
Table 5. Bootstrap significance test for the parallel multiple mediator model.
Table 5. Bootstrap significance test for the parallel multiple mediator model.
EffectPathbBoot SEpBoot 95% CI
LLCIULCI
Total Effect (H1)Environmental dynamism–innovation performance0.2320.0600.0000.1140.349
Direct EffectEnvironmental dynamism–innovation performance0.0010.0550.981−0.1070.110
Total Indirect Effect0.2300.042 0.1560.325
Indirect Effect 1 (H2)Environmental dynamism–strategic prospecting–innovation performance 0.1650.040 0.0960.254
Indirect Effect 2 (H3)Environmental dynamism–absorptive capacity–innovation performance 0.0660.024 0.0270.124
Pairwise ComparisonsIndirect effect 1–indirect effect 20.0990.051 0.0070.208
Note: Parallel multiple mediation analysis including all the control variables. Bootstrap samples: 5000.
Table 6. Bootstrap significance test for the serial multiple mediator model.
Table 6. Bootstrap significance test for the serial multiple mediator model.
EffectPathBBoot SEpBoot 95% CI
LLCIULCI
Total Effect (H1)Environmental dynamism–innovation performance0.2320.0600.0000.1140.349
Direct EffectEnvironmental dynamism–innovation performance0.0010.0550.981−0.1070.110
Total Indirect Effect0.2300.042 0.1560.325
Indirect Effect 1 (H2)Environmental dynamism–strategic prospecting–innovation performance 0.1650.041 0.0950.259
Indirect Effect 2 (H3)Environmental dynamism–absorptive capacity–innovation performance −0.0040.014 −0.0340.023
Indirect Effect 3 (H4)Environmental dynamism–strategic prospecting–absorptive capacity–innovation performance 0.0700.023 0.0310.122
Pairwise ComparisonsIndirect 1–indirect 30.0950.052 −0.0030.202
Indirect 1–indirect 20.1690.042 0.0950.265
Indirect 3–indirect 20.0740.030 0.0280.152
Note: Parallel multiple mediation analysis including all the control variables. Bootstrap samples: 5000.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Seo, E.-H.; Kim, C.-Y.; Kim, K. A Study on the Mechanisms Linking Environmental Dynamism to Innovation Performance. Sustainability 2020, 12, 9999. https://0-doi-org.brum.beds.ac.uk/10.3390/su12239999

AMA Style

Seo E-H, Kim C-Y, Kim K. A Study on the Mechanisms Linking Environmental Dynamism to Innovation Performance. Sustainability. 2020; 12(23):9999. https://0-doi-org.brum.beds.ac.uk/10.3390/su12239999

Chicago/Turabian Style

Seo, Eun-Hwa, Choo-Yeon Kim, and Kwangsoo Kim. 2020. "A Study on the Mechanisms Linking Environmental Dynamism to Innovation Performance" Sustainability 12, no. 23: 9999. https://0-doi-org.brum.beds.ac.uk/10.3390/su12239999

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop