Next Issue
Volume 14, January-2
Previous Issue
Volume 13, December-2
 
 
remotesensing-logo

Journal Browser

Journal Browser

Remote Sens., Volume 14, Issue 1 (January-1 2022) – 241 articles

Cover Story (view full-size image): The Aguapey Valuable Grassland Area (VGA), one of the most well-preserved temperate grassland areas within Argentina, is currently threatened by the anthropogenic expansion of exotic tree plantations. The aim of this study was to characterize structural changes in the landscape of the Aguapey VGA between 1999 and 2020 based on remotely sensed data. The analysis revealed that over the 20-year period studied temperate grassland cover decreased by almost 22% due to the expansion of tree plantations. The afforestation process led first to grassland perforation and then to its attrition. The evidence of grassland loss and fragmentation within the Aguapey VGA should be considered as an early warning to promote sustainable land-use policies, mainly towards the Aguapey VGA’s southern region where temperate grassland remains the predominant land cover. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
14 pages, 15962 KiB  
Article
Ice Cover, Subglacial Landscape, and Estimation of Bottom Melting of Mac. Robertson, Princess Elizabeth, Wilhelm II, and Western Queen Mary Lands, East Antarctica
by Sergey Popov
Remote Sens. 2022, 14(1), 241; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010241 - 05 Jan 2022
Cited by 2 | Viewed by 3061
Abstract
This study demonstrates the results of Russian airborne radio-echo sounding (RES) investigations and also seismic reflection soundings carried out in 1971–2020 over a vast area of coastal part of East Antarctica. It is the first comprehensive summary mapping of these data. Field research, [...] Read more.
This study demonstrates the results of Russian airborne radio-echo sounding (RES) investigations and also seismic reflection soundings carried out in 1971–2020 over a vast area of coastal part of East Antarctica. It is the first comprehensive summary mapping of these data. Field research, equipment, errors of initial RES data, and methods of gridding are discussed. Ice thickness, ice base elevation, and bedrock topography are presented. The ice thickness across the research area varies from a few meters to 3620 m, and is greatest in the local subglacial depressions. The average thickness is about 1220 m. The total volume of the ice is about 710,500 km3. The bedrock heights vary from 2860 m below sea level in the ocean bathyal zone to 2040 m above sea level in the Grove Mountains area (4900 m relief). The main directions of the bedrock orographic forms are concentrated mostly in three intervals: 345–30, 45–70, and 70–100. The bottom melting rate was estimated on the basis of the simple Zotikov model. Total annual melting under the study area is about 0.633 cubic meters. The total annual melting in the study area is approximately 1.5 mm/yr. Full article
(This article belongs to the Special Issue The Cryosphere Observations Based on Using Remote Sensing Techniques)
Show Figures

Figure 1

19 pages, 4128 KiB  
Article
Coastal Mean Dynamic Topography Recovery Based on Multivariate Objective Analysis by Combining Data from Synthetic Aperture Radar Altimeter
by Yihao Wu, Jia Huang, Xiufeng He, Zhicai Luo and Haihong Wang
Remote Sens. 2022, 14(1), 240; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010240 - 05 Jan 2022
Cited by 2 | Viewed by 2592
Abstract
MDT recovery over coastal regions is challenging, as the mean sea surface (MSS) and geoid/quasi-geoid models are of low quality. The altimetry satellites equipped with the synthetic aperture radar (SAR) altimeters provide more accurate sea surface heights than traditional ones close to the [...] Read more.
MDT recovery over coastal regions is challenging, as the mean sea surface (MSS) and geoid/quasi-geoid models are of low quality. The altimetry satellites equipped with the synthetic aperture radar (SAR) altimeters provide more accurate sea surface heights than traditional ones close to the coast. We investigate the role of using the SAR-based MSS in coastal MDT recovery, and the effects introduced by the SAR altimetry data are quantified and assessed. We model MDTs based on the multivariate objective analysis, where the MSS and the recently released satellite-only global geopotential model are combined. The numerical experiments over the coast of Japan and southeastern China show that the use of the SAR-based MSS improves the local MDT. The root mean square (RMS) of the misfits between MDT-modeled with SAR altimetry data and the ocean data is lower than that derived from MDT computed without SAR data—by a magnitude of 4–8 mm. Moreover, the geostrophic velocities derived from MDT modeled with the SAR altimetry data have better fits with buoy data than those derived from MDT modeled without SAR data. In total, our studies highlight the use of SAR altimetry data in coastal MDT recovery. Full article
(This article belongs to the Special Issue Coastal Area Observations Based on Satellite Altimetry Data)
Show Figures

Graphical abstract

28 pages, 23438 KiB  
Article
Quantitative Assessment for the Spatiotemporal Changes of Ecosystem Services, Tradeoff–Synergy Relationships and Drivers in the Semi-Arid Regions of China
by Yongge Li, Wei Liu, Qi Feng, Meng Zhu, Linshan Yang and Jutao Zhang
Remote Sens. 2022, 14(1), 239; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010239 - 05 Jan 2022
Cited by 18 | Viewed by 3703
Abstract
Ecosystem services in arid inland regions are significantly affected by climate change and land use/land cover change associated with agricultural activity. However, the dynamics and relationships of ecosystem services affected by natural and anthropogenic drivers in inland regions are still less understood. In [...] Read more.
Ecosystem services in arid inland regions are significantly affected by climate change and land use/land cover change associated with agricultural activity. However, the dynamics and relationships of ecosystem services affected by natural and anthropogenic drivers in inland regions are still less understood. In this study, the spatiotemporal patterns of ecosystem services in the Hexi Region were quantified based on multiple high-resolution datasets, the InVEST model and the Revised Wind Erosion Equation (RWEQ) model. In addition, the trade-offs and synergistic relationships among multiple ecosystem services were also explored by Pearson correlation analysis and bivariate spatial autocorrelation, and redundancy analysis (RDA) was also employed to determine the environmental drivers of these services and interactions. The results showed that most ecosystem services had a similar spatial distribution pattern with an increasing trend from northwest to southeast. Over the past 40 years, ecosystem services in the Hexi Region have improved significantly, with the water retention and soil retention increasing by 87.17 × 108 m3 and 287.84 × 108 t, respectively, and the sand fixation decreasing by 369.17 × 104 t. Among these ecosystem services, strong synergistic relationships were detected, while the trade-offs were found to be weak, and showed significant spatial heterogeneity in the Hexi Region. The spatial synergies and trade-offs in the Qilian Mountains were 1.02 and 1.37 times higher than those in the Hexi Corridor, respectively. Human activities were found to exacerbate the trade-offs between ecosystem services by increasing water consumption in the Hexi Corridor, with the exception of carbon storage. In particular, there were significant tradeoffs between food production and water retention, and between soil retention and habitat quality in the oases of the Hexi Corridor, which is affected by rapid population growth and cropland expansion. Additionally, precipitation, temperature and vegetation cover in the Qilian Mountains have increased significantly over the past four decades, and these increases significantly contributed to the enhancements in water retention, carbon storage, habitat quality, soil retention and food production. Nevertheless, the amount of sand fixation significantly decreased, and this was probably associated with the reduction in wind speed over the past four decades. Our results highlighted the importance of climate wetting and water resource management in the enhancement of ecosystem services and the mitigation of food production trade-offs for arid inland regions. Full article
Show Figures

Figure 1

22 pages, 14811 KiB  
Article
Target Classification of Similar Spatial Characteristics in Complex Urban Areas by Using Multispectral LiDAR
by Binhan Luo, Jian Yang, Shalei Song, Shuo Shi, Wei Gong, Ao Wang and Lin Du
Remote Sens. 2022, 14(1), 238; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010238 - 05 Jan 2022
Cited by 30 | Viewed by 3684
Abstract
With the rapid modernization, many remote-sensing sensors were developed for classifying urban land and environmental monitoring. Multispectral LiDAR, which serves as a new technology, has exhibited potential in remote-sensing monitoring due to the synchronous acquisition of three-dimension point cloud and spectral information. This [...] Read more.
With the rapid modernization, many remote-sensing sensors were developed for classifying urban land and environmental monitoring. Multispectral LiDAR, which serves as a new technology, has exhibited potential in remote-sensing monitoring due to the synchronous acquisition of three-dimension point cloud and spectral information. This study confirmed the potential of multispectral LiDAR for complex urban land cover classification through three comparative methods. Firstly, the Optech Titan LiDAR point cloud was pre-processed and ground filtered. Then, three methods were analyzed: (1) Channel 1, based on Titan data to simulate the classification of a single-band LiDAR; (2) three-channel information and the digital surface model (DSM); and (3) three-channel information and DSM combined with the calculated three normalized difference vegetation indices (NDVIs) for urban land classification. A decision tree was subsequently used in classification based on the combination of intensity information, elevation information, and spectral information. The overall classification accuracies of the point cloud using the single-channel classification and the multispectral LiDAR were 64.66% and 93.82%, respectively. The results show that multispectral LiDAR has excellent potential for classifying land use in complex urban areas due to the availability of spectral information and that the addition of elevation information to the classification process could boost classification accuracy. Full article
(This article belongs to the Special Issue Land Cover Classification Using Multispectral LiDAR Data)
Show Figures

Figure 1

15 pages, 18810 KiB  
Technical Note
CO2 Injection Deformation Monitoring Based on UAV and InSAR Technology: A Case Study of Shizhuang Town, Shanxi Province, China
by Tian Zhang, Wanchang Zhang, Ruizhao Yang, Dan Cao, Longfei Chen, Dewei Li and Lingbin Meng
Remote Sens. 2022, 14(1), 237; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010237 - 05 Jan 2022
Cited by 16 | Viewed by 2665
Abstract
Carbon Capture, Utilization and Storage, also referred to as Carbon Capture, Utilization and Sequestration (CCUS), is one of the novel climate mitigation technologies by which CO2 emissions are captured from sources, such as fossil power generation and industrial processes, and further either [...] Read more.
Carbon Capture, Utilization and Storage, also referred to as Carbon Capture, Utilization and Sequestration (CCUS), is one of the novel climate mitigation technologies by which CO2 emissions are captured from sources, such as fossil power generation and industrial processes, and further either reused or stored with more attention being paid on the utilization of captured CO2. In the whole CCUS process, the dominant migration pathway of CO2 after being injected underground becomes very important information to judge the possible storage status as well as one of the essential references for evaluating possible environmental affects. Interferometric Synthetic Aperture Radar (InSAR) technology, with its advantages of extensive coverage in surface deformation monitoring and all-weather traceability of the injection processes, has become one of the promising technologies frequently adopted in worldwide CCUS projects. In this study, taking the CCUS sequestration area in Shizhuang Town, Shanxi Province, China, as an example, unmanned aerial vehicle (UAV) photography measurement technology with a 3D surface model at a resolution of 5.3 cm was applied to extract the high-resolution digital elevation model (DEM) of the study site in coordination with InSAR technology to more clearly display the results of surface deformation monitoring of the CO2 injection area. A 2 km surface heaving dynamic processes before and after injection from June 2020 to July 2021 was obtained, and a CO2 migration pathway northeastward was observed, which was rather consistent with the monitoring results by logging and micro-seismic studies. Additionally, an integrated monitoring scheme, which will be the trend of monitoring in the future, is proposed in the discussion. Full article
(This article belongs to the Section Environmental Remote Sensing)
Show Figures

Figure 1

14 pages, 4166 KiB  
Technical Note
Validation of Recent Altimeter Missions at Non-Dedicated Tide Gauge Stations in the Southeastern North Sea
by Saskia Esselborn, Tilo Schöne, Julia Illigner, Robert Weiß, Thomas Artz and Xinge Huang
Remote Sens. 2022, 14(1), 236; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010236 - 05 Jan 2022
Cited by 1 | Viewed by 2049
Abstract
Consistent calibration and monitoring is a basic prerequisite for providing a reliable time series of global and regional sea-level variations from altimetry. The precisions of sea-level measurements and regional biases for six altimeter missions (Jason-1/2/3, Envisat, Saral, Sentinel-3A) are assessed in this study [...] Read more.
Consistent calibration and monitoring is a basic prerequisite for providing a reliable time series of global and regional sea-level variations from altimetry. The precisions of sea-level measurements and regional biases for six altimeter missions (Jason-1/2/3, Envisat, Saral, Sentinel-3A) are assessed in this study at 11 GNSS-controlled tide gauge stations in the German Bight (SE North Sea) for the period 2002 to 2019. The gauges are partly located at the open water, and partly at the coast close to mudflats. The altimetry is extracted at virtual stations with distances from 2 to 24 km from the gauges. The processing is optimized for the region and adjusted for the comparison with instantaneous tide gauge readings. An empirical correction is developed to account for mean height gradients and slight differences of the tidal dynamics between the gauge and altimetry, which improves the agreement between the two data sets by 15–75%. The precision of the altimeters depends on the location and mission and ranges from 1.8 to 3.7 cm if the precision of the gauges is 2 cm. The accuracy of the regional mission biases is strongly dependent on the mean sea surface heights near the stations. The most consistent biases are obtained based on the CLS2011 model with mission-dependent accuracies from 1.3 to 3.4 cm. Hence, the GNSS-controlled tide gauges operated operationally by the German Waterway and Shipping Administration (WSV) might complement the calibration and monitoring activities at dedicated CalVal stations. Full article
(This article belongs to the Special Issue Coastal Area Observations Based on Satellite Altimetry Data)
Show Figures

Figure 1

24 pages, 3899 KiB  
Article
Identifying Forest Structural Types along an Aridity Gradient in Peninsular Spain: Integrating Low-Density LiDAR, Forest Inventory, and Aridity Index
by Julián Tijerín-Triviño, Daniel Moreno-Fernández, Miguel A. Zavala, Julen Astigarraga and Mariano García
Remote Sens. 2022, 14(1), 235; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010235 - 05 Jan 2022
Cited by 9 | Viewed by 2871
Abstract
Forest structure is a key driver of forest functional processes. The characterization of forest structure across spatiotemporal scales is essential for forest monitoring and management. LiDAR data have proven particularly useful for cost-effectively estimating forest structural attributes. This paper evaluates the ability of [...] Read more.
Forest structure is a key driver of forest functional processes. The characterization of forest structure across spatiotemporal scales is essential for forest monitoring and management. LiDAR data have proven particularly useful for cost-effectively estimating forest structural attributes. This paper evaluates the ability of combined forest inventory data and low-density discrete return airborne LiDAR data to discriminate main forest structural types in the Mediterranean-temperate transition ecotone. Firstly, we used six structural variables from the Spanish National Forest Inventory (SNFI) and an aridity index in a k-medoids algorithm to define the forest structural types. These variables were calculated for 2770 SNFI plots. We identified the main species for each structural type using the SNFI. Secondly, we developed a Random Forest model to predict the spatial distribution of structural types and create wall-to-wall maps from LiDAR data. The k-medoids clustering algorithm enabled the identification of four clusters of forest structures. A total of six out of forty-one potential LiDAR metrics were utilized in our Random Forest, after evaluating their importance in the Random Forest model. Selected metrics were, in decreasing order of importance, the percentage of all returns above 2 m, mean height of the canopy profile, the difference between the 90th and 50th height percentiles, the area under the canopy curve, and the 5th and the 95th percentile of the return heights. The model yielded an overall accuracy of 64.18%. The producer’s accuracy ranged between 36.11% and 88.93%. Our results confirm the potential of this approximation for the continuous monitoring of forest structures, which is key to guiding forest management in this region. Full article
(This article belongs to the Topic Climate Change and Environmental Sustainability)
Show Figures

Figure 1

16 pages, 59920 KiB  
Technical Note
Stream Boundary Detection of a Hyper-Arid, Polar Region Using a U-Net Architecture: Taylor Valley, Antarctica
by Mary C. Barlow, Xinxiang Zhu and Craig L. Glennie
Remote Sens. 2022, 14(1), 234; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010234 - 05 Jan 2022
Cited by 1 | Viewed by 2203
Abstract
Convolutional neural networks (CNNs) are becoming an increasingly popular approach for classification mapping of large complex regions where manual data collection is too time consuming. Stream boundaries in hyper-arid polar regions such as the McMurdo Dry Valleys (MDVs) in Antarctica are difficult to [...] Read more.
Convolutional neural networks (CNNs) are becoming an increasingly popular approach for classification mapping of large complex regions where manual data collection is too time consuming. Stream boundaries in hyper-arid polar regions such as the McMurdo Dry Valleys (MDVs) in Antarctica are difficult to locate because they have little hydraulic flow throughout the short summer months. This paper utilizes a U-Net CNN to map stream boundaries from lidar derived rasters in Taylor Valley located within the MDVs, covering ∼770 km2. The training dataset consists of 217 (300 × 300 m2) well-distributed tiles of manually classified stream boundaries with diverse geometries (straight, sinuous, meandering, and braided) throughout the valley. The U-Net CNN is trained on elevation, slope, lidar intensity returns, and flow accumulation rasters. These features were used for detection of stream boundaries by providing potential topographic cues such as inflection points at stream boundaries and reflective properties of streams such as linear patterns of wetted soil, water, or ice. Various combinations of these features were analyzed based on performance. The test set performance revealed that elevation and slope had the highest performance of the feature combinations. The test set performance analysis revealed that the CNN model trained with elevation independently received a precision, recall, and F1 score of 0.94±0.05, 0.95±0.04, and 0.94±0.04 respectively, while slope received 0.96±0.03, 0.93±0.04, and 0.94±0.04, respectively. The performance of the test set revealed higher stream boundary prediction accuracies along the coast, while inland performance varied. Meandering streams had the highest stream boundary prediction performance on the test set compared to the other stream geometries tested here because meandering streams are further evolved and have more distinguishable breaks in slope, indicating stream boundaries. These methods provide a novel approach for mapping stream boundaries semi-automatically in complex regions such as hyper-arid environments over larger scales than is possible for current methods. Full article
(This article belongs to the Special Issue Remote Sensing of Dryland River Systems)
Show Figures

Figure 1

25 pages, 26383 KiB  
Article
Multispectral Image Enhancement Based on the Dark Channel Prior and Bilateral Fractional Differential Model
by Weijie Chen, Zhenhong Jia, Jie Yang and Nikola K. Kasabov
Remote Sens. 2022, 14(1), 233; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010233 - 05 Jan 2022
Cited by 6 | Viewed by 2435
Abstract
Compared with single-band remote sensing images, multispectral images can obtain information on the same target in different bands. By combining the characteristics of each band, we can obtain clearer enhanced images; therefore, we propose a multispectral image enhancement method based on the improved [...] Read more.
Compared with single-band remote sensing images, multispectral images can obtain information on the same target in different bands. By combining the characteristics of each band, we can obtain clearer enhanced images; therefore, we propose a multispectral image enhancement method based on the improved dark channel prior (IDCP) and bilateral fractional differential (BFD) model to make full use of the multiband information. First, the original multispectral image is inverted to meet the prior conditions of dark channel theory. Second, according to the characteristics of multiple bands, the dark channel algorithm is improved. The RGB channels are extended to multiple channels, and the spatial domain fractional differential mask is used to optimize the transmittance estimation to make it more consistent with the dark channel hypothesis. Then, we propose a bilateral fractional differentiation algorithm that enhances the edge details of an image through the fractional differential in the spatial domain and intensity domain. Finally, we implement the inversion operation to obtain the final enhanced image. We apply the proposed IDCP_BFD method to a multispectral dataset and conduct sufficient experiments. The experimental results show the superiority of the proposed method over relative comparison methods. Full article
(This article belongs to the Special Issue Advances in Optical Remote Sensing Image Processing and Applications)
Show Figures

Figure 1

13 pages, 4516 KiB  
Technical Note
Vegetation Mapping in the Permafrost Region: A Case Study on the Central Qinghai-Tibet Plateau
by Defu Zou, Lin Zhao, Guangyue Liu, Erji Du, Guojie Hu, Zhibin Li, Tonghua Wu, Xiaodong Wu and Jie Chen
Remote Sens. 2022, 14(1), 232; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010232 - 05 Jan 2022
Cited by 5 | Viewed by 2178
Abstract
An accurate and detailed vegetation map is of crucial significance for understanding the spatial heterogeneity of subsurfaces, which can help to characterize the thermal state of permafrost. The absence of an alpine swamp meadow (ASM) type, or an insufficient resolution (usually km-level) to [...] Read more.
An accurate and detailed vegetation map is of crucial significance for understanding the spatial heterogeneity of subsurfaces, which can help to characterize the thermal state of permafrost. The absence of an alpine swamp meadow (ASM) type, or an insufficient resolution (usually km-level) to capture the spatial distribution of the ASM, greatly limits the availability of existing vegetation maps in permafrost modeling of the Qinghai-Tibet Plateau (QTP). This study generated a map of the vegetation type at a spatial resolution of 30 m on the central QTP. The random forest (RF) classification approach was employed to map the vegetation based on 319 ground-truth samples, combined with a set of input variables derived from the visible, infrared, and thermal Landsat-8 images. Validation using a train-test split (i.e., 70% of the samples were randomly selected to train the RF model, while the remaining 30% were used for validation and a total of 1000 runs) showed that the average overall accuracy and Kappa coefficient of the RF approach were 0.78 (0.68–0.85) and 0.69 (0.64–0.74), respectively. The confusion matrix showed that the overall accuracy and Kappa coefficient of the predicted vegetation map reached 0.848 (0.844–0.852) and 0.790 (0.785–0.796), respectively. The user accuracies for the ASM, alpine meadow, alpine steppe, and alpine desert were 95.0%, 83.3%, 82.4%, and 86.7%, respectively. The most important variables for vegetation type prediction were two vegetation indices, i.e., NDVI and EVI. The surface reflectance of visible and shortwave infrared bands showed a secondary contribution, and the brightness temperature and the surface temperature of the thermal infrared bands showed little contribution. The dominant vegetation in the study area is alpine steppe and alpine desert. The results of this study can provide an accurate and detailed vegetation map, especially for the distribution of the ASM, which can help to improve further permafrost studies. Full article
(This article belongs to the Section Biogeosciences Remote Sensing)
Show Figures

Graphical abstract

35 pages, 19653 KiB  
Article
Image-Aided LiDAR Mapping Platform and Data Processing Strategy for Stockpile Volume Estimation
by Raja Manish, Seyyed Meghdad Hasheminasab, Jidong Liu, Yerassyl Koshan, Justin Anthony Mahlberg, Yi-Chun Lin, Radhika Ravi, Tian Zhou, Jeremy McGuffey, Timothy Wells, Darcy Bullock and Ayman Habib
Remote Sens. 2022, 14(1), 231; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010231 - 05 Jan 2022
Cited by 11 | Viewed by 4932
Abstract
Stockpile quantity monitoring is vital for agencies and businesses to maintain inventory of bulk material such as salt, sand, aggregate, lime, and many other materials commonly used in agriculture, highways, and industrial applications. Traditional approaches for volumetric assessment of bulk material stockpiles, e.g., [...] Read more.
Stockpile quantity monitoring is vital for agencies and businesses to maintain inventory of bulk material such as salt, sand, aggregate, lime, and many other materials commonly used in agriculture, highways, and industrial applications. Traditional approaches for volumetric assessment of bulk material stockpiles, e.g., truckload counting, are inaccurate and prone to cumulative errors over long time. Modern aerial and terrestrial remote sensing platforms equipped with camera and/or light detection and ranging (LiDAR) units have been increasingly popular for conducting high-fidelity geometric measurements. Current use of these sensing technologies for stockpile volume estimation is impacted by environmental conditions such as lack of global navigation satellite system (GNSS) signals, poor lighting, and/or featureless surfaces. This study addresses these limitations through a new mapping platform denoted as Stockpile Monitoring and Reporting Technology (SMART), which is designed and integrated as a time-efficient, cost-effective stockpile monitoring solution. The novel mapping framework is realized through camera and LiDAR data-fusion that facilitates stockpile volume estimation in challenging environmental conditions. LiDAR point clouds are derived through a sequence of data collections from different scans. In order to handle the sparse nature of the collected data at a given scan, an automated image-aided LiDAR coarse registration technique is developed followed by a new segmentation approach to derive features, which are used for fine registration. The resulting 3D point cloud is subsequently used for accurate volume estimation. Field surveys were conducted on stockpiles of varying size and shape complexity. Independent assessment of stockpile volume using terrestrial laser scanners (TLS) shows that the developed framework had close to 1% relative error. Full article
Show Figures

Graphical abstract

25 pages, 36625 KiB  
Article
Mapping Blue and Red Color-Coated Steel Sheet Roof Buildings over China Using Sentinel-2A/B MSIL2A Images
by Alim Samat, Paolo Gamba, Wei Wang, Jieqiong Luo, Erzhu Li, Sicong Liu, Peijun Du and Jilili Abuduwaili
Remote Sens. 2022, 14(1), 230; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010230 - 05 Jan 2022
Cited by 7 | Viewed by 4069
Abstract
Accurate and efficiently updated information on color-coated steel sheet (CCSS) roof materials in urban areas is of great significance for understanding the potential impact, challenges, and issues of these materials on urban sustainable development, human health, and the environment. Thanks to the development [...] Read more.
Accurate and efficiently updated information on color-coated steel sheet (CCSS) roof materials in urban areas is of great significance for understanding the potential impact, challenges, and issues of these materials on urban sustainable development, human health, and the environment. Thanks to the development of Earth observation technologies, remote sensing (RS) provides abundant data to identify and map CCSS materials with different colors in urban areas. However, existing studies are still quite challenging with regards to the data collection and processing costs, particularly in wide geographical areas. Combining free access high-resolution RS data and a cloud computing platform, i.e., Sentinel-2A/B data sets and Google Earth Engine (GEE), this study aims at CCSS material identification and mapping. Specifically, six novel spectral indexes that use Sentinel-2A/B MSIL2A data are proposed for blue and red CCSS material identification, namely the normalized difference blue building index (NDBBI), the normalized difference red building index NDRBI, the enhanced blue building index (EBBI), the enhanced red building index (ERBI), the logical blue building index (LBBI) and the logical red building index (LRBI). These indexes are qualitatively and quantitatively evaluated on a very large number of urban sites all over the P.R. China and compared with the state-of-the-art redness and blueness indexes (RI and BI, respectively). The results demonstrate that the proposed indexes, specifically the LRBI and LBBI, are highly effective in visual evaluation, clearly detecting and discriminating blue and red CCSS covers from other urban materials. Results show that urban areas from the northern parts of P.R. China have larger proportions of blue and red CCSS materials, and areas of blue and red CCSS material buildings are positively correlated with population and urban size at the provincial level across China. Full article
Show Figures

Figure 1

22 pages, 46702 KiB  
Article
Estimation of Chlorophyll-a Concentrations in Small Water Bodies: Comparison of Fused Gaofen-6 and Sentinel-2 Sensors
by Jiarui Shi, Qian Shen, Yue Yao, Junsheng Li, Fu Chen, Ru Wang, Wenting Xu, Zuoyan Gao, Libing Wang and Yuting Zhou
Remote Sens. 2022, 14(1), 229; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010229 - 05 Jan 2022
Cited by 23 | Viewed by 3827
Abstract
Chlorophyll-a concentrations in water bodies are one of the most important environmental evaluation indicators in monitoring the water environment. Small water bodies include headwater streams, springs, ditches, flushes, small lakes, and ponds, which represent important freshwater resources. However, the relatively narrow and fragmented [...] Read more.
Chlorophyll-a concentrations in water bodies are one of the most important environmental evaluation indicators in monitoring the water environment. Small water bodies include headwater streams, springs, ditches, flushes, small lakes, and ponds, which represent important freshwater resources. However, the relatively narrow and fragmented nature of small water bodies makes it difficult to monitor chlorophyll-a via medium-resolution remote sensing. In the present study, we first fused Gaofen-6 (a new Chinese satellite) images to obtain 2 m resolution images with 8 bands, which was approved as a good data source for Chlorophyll-a monitoring in small water bodies as Sentinel-2. Further, we compared five semi-empirical and four machine learning models to estimate chlorophyll-a concentrations via simulated reflectance using fused Gaofen-6 and Sentinel-2 spectral response function. The results showed that the extreme gradient boosting tree model (one of the machine learning models) is the most accurate. The mean relative error (MRE) was 9.03%, and the root-mean-square error (RMSE) was 4.5 mg/m3 for the Sentinel-2 sensor, while for the fused Gaofen-6 image, MRE was 6.73%, and RMSE was 3.26 mg/m3. Thus, both fused Gaofen-6 and Sentinel-2 could estimate the chlorophyll-a concentrations in small water bodies. Since the fused Gaofen-6 exhibited a higher spatial resolution and Sentinel-2 exhibited a higher temporal resolution. Full article
(This article belongs to the Special Issue Hyperspectral Remote Sensing Technology in Water Quality Evaluation)
Show Figures

Graphical abstract

17 pages, 23169 KiB  
Article
A Multiview Semantic Vegetation Index for Robust Estimation of Urban Vegetation Cover
by Asim Khan, Warda Asim, Anwaar Ulhaq and Randall W. Robinson
Remote Sens. 2022, 14(1), 228; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010228 - 05 Jan 2022
Cited by 4 | Viewed by 2724
Abstract
Urban vegetation growth is vital for developing sustainable and liveable cities in the contemporary era since it directly helps people’s health and well-being. Estimating vegetation cover and biomass is commonly done by calculating various vegetation indices for automated urban vegetation management and monitoring. [...] Read more.
Urban vegetation growth is vital for developing sustainable and liveable cities in the contemporary era since it directly helps people’s health and well-being. Estimating vegetation cover and biomass is commonly done by calculating various vegetation indices for automated urban vegetation management and monitoring. However, most of these indices fail to capture robust estimation of vegetation cover due to their inherent focus on colour attributes with limited viewpoint and ignore seasonal changes. To solve this limitation, this article proposed a novel vegetation index called the Multiview Semantic Vegetation Index (MSVI), which is robust to color, viewpoint, and seasonal variations. Moreover, it can be applied directly to RGB images. This Multiview Semantic Vegetation Index (MSVI) is based on deep semantic segmentation and multiview field coverage and can be integrated into any vegetation management platform. This index has been tested on Google Street View (GSV) imagery of Wyndham City Council, Melbourne, Australia. The experiments and training achieved an overall pixel accuracy of 89.4% and 92.4% for FCN and U-Net, respectively. Thus, the MSVI can be a helpful instrument for analysing urban forestry and vegetation biomass since it provides an accurate and reliable objective method for assessing the plant cover at street level. Full article
(This article belongs to the Special Issue Advances in Object and Activity Detection in Remote Sensing Imagery)
Show Figures

Graphical abstract

17 pages, 3583 KiB  
Article
Comparison between Topographic and Bathymetric LiDAR Terrain Models in Flood Inundation Estimations
by Mahmoud Omer Mahmoud Awadallah, Ana Juárez and Knut Alfredsen
Remote Sens. 2022, 14(1), 227; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010227 - 05 Jan 2022
Cited by 7 | Viewed by 3905
Abstract
Remotely sensed LiDAR data has allowed for more accurate flood map generation through hydraulic simulations. Topographic and bathymetric LiDARs are the two types of LiDAR used, of which the former cannot penetrate water bodies while the latter can. Usually, the topographic LiDAR is [...] Read more.
Remotely sensed LiDAR data has allowed for more accurate flood map generation through hydraulic simulations. Topographic and bathymetric LiDARs are the two types of LiDAR used, of which the former cannot penetrate water bodies while the latter can. Usually, the topographic LiDAR is more available than bathymetric LiDAR, and it is, therefore, a very interesting data source for flood mapping. In this study, we made comparisons between flood inundation maps from several flood scenarios generated by the HEC-RAS 2D model for 11 sites in Norway using both bathymetric and topographic terrain models. The main objective is to investigate the accuracy of the flood inundations generated from the plain topographic LiDAR, the links of the inaccuracies with geomorphic features, and the potential of using corrections for missing underwater geometry in the topographic LiDAR data to improve accuracy. The results show that the difference in inundation between topographic and bathymetric LiDAR models decreases with increasing the flood size, and this trend was found to be correlated with the amount of protection embankments in the reach. In reaches where considerable embankments are constructed, the difference between the inundations increases until the embankments are overtopped and then returns to the general trend. In addition, the magnitude of the inundation error was found to correlate positively with the sinuosity and embankment coverage and negatively with the angle of the bank. Corrections were conducted by modifying the flood discharge based on the flight discharge of the topographic LiDAR or by correcting the topographic LiDAR terrain based on the volume of the flight discharge, where the latter method generally gave better improvements. Full article
Show Figures

Figure 1

23 pages, 4704 KiB  
Article
Laboratory Research on Polarized Optical Properties of Saline-Alkaline Soil Based on Semi-Empirical Models and Machine Learning Methods
by Qianyi Gu, Yang Han, Yaping Xu, Haiyan Yao, Haofang Niu and Fang Huang
Remote Sens. 2022, 14(1), 226; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010226 - 05 Jan 2022
Cited by 4 | Viewed by 1878
Abstract
Currently, soil salinization is a serious problem affecting agricultural production and human settlements. Remote sensing techniques have the advantages of a large monitoring range, rapid acquisition of information, implementation of dynamic monitoring, and low impact on the ground surface. Over the past two [...] Read more.
Currently, soil salinization is a serious problem affecting agricultural production and human settlements. Remote sensing techniques have the advantages of a large monitoring range, rapid acquisition of information, implementation of dynamic monitoring, and low impact on the ground surface. Over the past two decades, many semi-empirical bidirectional polarized distribution function (BPDF) models have been proposed to accurately calculate the polarized reflectance (Rp) on the soil surface. Although there have been some studies on the BPDF model based on traditional machine learning methods, there is a lack of research on the BPDF model based on deep learning, especially using laboratory measurement spectrum data as the processing object, with limited research results. In this paper, we collected saline-alkaline soil in the field as the observation object and measured the Rp at multiple angles in the laboratory environment. We used semi-empirical models (the Nadal–Bréon model, Litvinov model, and Xie–Cheng model) and machine learning methods (support vector regression, random forest, and deep neural networks regression) to simulate and predict the surface Rp of saline-alkaline soils and compare them with experimental results. The measured values of the laboratory are compared and fitted, and the root mean squared error, R-squared, and correlation coefficient are calculated to express the prediction effect. The results show that the predictions of the BPDF model based on machine learning methods are generally better than those of the semi-empirical BPDF model, which is improved by 3.06% at 670 nm and 19.75% at 865 nm. The results of this study also provide new ideas and methods based on deep learning for the prediction of Rp on the surface of saline-alkaline soils. Full article
Show Figures

Graphical abstract

14 pages, 37012 KiB  
Article
Monitoring Oasis Cotton Fields Expansion in Arid Zones Using the Google Earth Engine: A Case Study in the Ogan-Kucha River Oasis, Xinjiang, China
by Lijing Han, Jianli Ding, Jinjie Wang, Junyong Zhang, Boqiang Xie and Jianping Hao
Remote Sens. 2022, 14(1), 225; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010225 - 04 Jan 2022
Cited by 10 | Viewed by 2704
Abstract
Rapid and accurate mapping of the spatial distribution of cotton fields is helpful to ensure safe production of cotton fields and the rationalization of land-resource planning. As cotton is an important economic pillar in Xinjiang, accurate and efficient mapping of cotton fields helps [...] Read more.
Rapid and accurate mapping of the spatial distribution of cotton fields is helpful to ensure safe production of cotton fields and the rationalization of land-resource planning. As cotton is an important economic pillar in Xinjiang, accurate and efficient mapping of cotton fields helps the implementation of rural revitalization strategy in Xinjiang region. In this paper, based on the Google Earth Engine cloud computing platform, we use a random forest machine-learning algorithm to classify Landsat 5 and 8 and Sentinel 2 satellite images to obtain the spatial distribution characteristics of cotton fields in 2011, 2015 and 2020 in the Ogan-Kucha River oasis, Xinjiang. Unlike previous studies, the mulching process was considered when using cotton field phenology information as a classification feature. The results show that both Landsat 5, Landsat 8 and Sentinel 2 satellites can successfully classify cotton field information when the mulching process is considered, but Sentinel 2 satellite classification results have the best user accuracy of 0.947. Sentinel 2 images can distinguish some cotton fields from roads well because they have higher spatial resolution than Landsat 8. After the cotton fields were mulched, there was a significant increase in spectral reflectance in the visible, red-edge and near-infrared bands, and a decrease in the short-wave infrared band. The increase in the area of oasis cotton fields and the extensive use of mulched drip-irrigation water saving facilities may lead to a decrease in the groundwater level. Overall, the use of mulch as a phenological feature for classification mapping is a good indicator in cotton-growing areas covered by mulch, and mulch drip irrigation may lead to a decrease in groundwater levels in oases in arid areas. Full article
(This article belongs to the Special Issue Smart Farming and Land Management Enabled by Remotely Sensed Big Data)
Show Figures

Figure 1

21 pages, 5361 KiB  
Article
Updated GOES-13 Heliosat-2 Method for Global Horizontal Irradiation in the Americas
by Jessica Bechet, Tommy Albarelo, Jérémy Macaire, Maha Salloum, Sara Zermani, Antoine Primerose and Laurent Linguet
Remote Sens. 2022, 14(1), 224; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010224 - 04 Jan 2022
Cited by 2 | Viewed by 1769
Abstract
Increasing the utilization of renewable energy is at the center of most sustainability policies. Solar energy is the most abundant resource of this type on Earth, and optimizing its use requires the optimal estimation of surface solar irradiation. Heliosat-2 is one of the [...] Read more.
Increasing the utilization of renewable energy is at the center of most sustainability policies. Solar energy is the most abundant resource of this type on Earth, and optimizing its use requires the optimal estimation of surface solar irradiation. Heliosat-2 is one of the most popular methods of global horizontal irradiation (GHI) estimation. Originally developed for the Meteosat satellite, Heliosat-2 has been modified in previous work to deal with GOES-13 data and named here GOES_H2. This model has been validated through the computation of indicators and irradiation maps for the Guiana Shield. This article proposes an improved version of GOES_H2, which has been combined with a radiative transfer parameterization (RTP) and the McClear clear-sky model (MC). This new version, hereafter designated RTP_MC_GOES_H2, was tested on eight stations from the Baseline Surface Radiation Network, located in North and South America, and covered by GOES-13. RTP_MC_GOES_H2 improves the hourly GHI estimates independently of the type of sky. This improvement is independent of the climate, no matter the station, the RTP_MC_GOES_H2 gives better results of MBE and RMSE than the original GOES_H2 method. Indeed, the MBE and RMSE values, respectively, change from 11.93% to 2.42% and 23.24% to 18.24% for North America and from 4.35% to 1.79% and 19.97% to 17.37 for South America. Moreover, the flexibility of the method may allow to improve results in the presence of snow cover and rainy/variable weather. Furthermore, RTP_MC_GOES_H2 results outperform or equalize those of other operational models. Full article
Show Figures

Figure 1

20 pages, 10605 KiB  
Article
Flood Detection Using Real-Time Image Segmentation from Unmanned Aerial Vehicles on Edge-Computing Platform
by Daniel Hernández, José M. Cecilia, Juan-Carlos Cano and Carlos T. Calafate
Remote Sens. 2022, 14(1), 223; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010223 - 04 Jan 2022
Cited by 20 | Viewed by 5095
Abstract
With the proliferation of unmanned aerial vehicles (UAVs) in different contexts and application areas, efforts are being made to endow these devices with enough intelligence so as to allow them to perform complex tasks with full autonomy. In particular, covering scenarios such as [...] Read more.
With the proliferation of unmanned aerial vehicles (UAVs) in different contexts and application areas, efforts are being made to endow these devices with enough intelligence so as to allow them to perform complex tasks with full autonomy. In particular, covering scenarios such as disaster areas may become particularly difficult due to infrastructure shortage in some areas, often impeding a cloud-based analysis of the data in near-real time. Enabling AI techniques at the edge is therefore fundamental so that UAVs themselves can both capture and process information to gain an understanding of their context, and determine the appropriate course of action in an independent manner. Towards this goal, in this paper, we take determined steps towards UAV autonomy in a disaster scenario such as a flood. In particular, we use a dataset of UAV images relative to different floods taking place in Spain, and then use an AI-based approach that relies on three widely used deep neural networks (DNNs) for semantic segmentation of images, to automatically determine the regions more affected by rains (flooded areas). The targeted algorithms are optimized for GPU-based edge computing platforms, so that the classification can be carried out on the UAVs themselves, and only the algorithm output is uploaded to the cloud for real-time tracking of the flooded areas. This way, we are able to reduce dependency on infrastructure, and to reduce network resource consumption, making the overall process greener and more robust to connection disruptions. Experimental results using different types of hardware and different architectures show that it is feasible to perform advanced real-time processing of UAV images using sophisticated DNN-based solutions. Full article
(This article belongs to the Special Issue 2D and 3D Mapping with UAV Data)
Show Figures

Graphical abstract

20 pages, 27520 KiB  
Article
The Role of Model Dimensionality in Linear Inverse Scattering from Dielectric Objects
by Gianluca Gennarelli, Giovanni Ludeno, Noviello Carlo, Ilaria Catapano and Francesco Soldovieri
Remote Sens. 2022, 14(1), 222; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010222 - 04 Jan 2022
Cited by 1 | Viewed by 1653
Abstract
This paper deals with 3D and 2D linear inverse scattering approaches based on the Born approximation, and investigates how the model dimensionality influences the imaging performance. The analysis involves dielectric objects hosted in a homogenous and isotropic medium and a multimonostatic/multifrequency measurement configuration. [...] Read more.
This paper deals with 3D and 2D linear inverse scattering approaches based on the Born approximation, and investigates how the model dimensionality influences the imaging performance. The analysis involves dielectric objects hosted in a homogenous and isotropic medium and a multimonostatic/multifrequency measurement configuration. A theoretical study of the spatial resolution is carried out by exploiting the singular value decomposition of 3D and 2D scattering operators. Reconstruction results obtained from synthetic data generated by using a 3D full-wave electromagnetic simulator are reported to support the conclusions drawn from the analysis of resolution limits. The presented analysis corroborates that 3D and 2D inversion approaches have almost identical imaging performance, unless data are severely corrupted by the noise. Full article
(This article belongs to the Special Issue Electromagnetic Modeling in Microwave Remote Sensing)
Show Figures

Figure 1

17 pages, 87268 KiB  
Article
SDR-Implemented Passive Bistatic SAR System Using Sentinel-1 Signal and Its Experiment Results
by Weike Feng, Jean-Michel Friedt and Pengcheng Wan
Remote Sens. 2022, 14(1), 221; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010221 - 04 Jan 2022
Cited by 1 | Viewed by 3110
Abstract
A fixed-receiver mobile-transmitter passive bistatic synthetic aperture radar (MF-PB-SAR) system, which uses the Sentinel-1 SAR satellite as its non-cooperative emitting source, has been developed by using embedded software-defined radio (SDR) hardware for high-resolution imaging of the targets in a local area in this [...] Read more.
A fixed-receiver mobile-transmitter passive bistatic synthetic aperture radar (MF-PB-SAR) system, which uses the Sentinel-1 SAR satellite as its non-cooperative emitting source, has been developed by using embedded software-defined radio (SDR) hardware for high-resolution imaging of the targets in a local area in this study. Firstly, Sentinel-1 and the designed system are introduced. Then, signal model, signal pre-processing methods, and effective target imaging methods are presented. At last, various experiment results of target imaging obtained at different locations are shown to validate the developed system and the proposed methods. It was found that targets in a range of several kilometers can be well imaged. Full article
Show Figures

Graphical abstract

22 pages, 8242 KiB  
Article
Optimization and Evaluation of SO2 Emissions Based on WRF-Chem and 3DVAR Data Assimilation
by Yiwen Hu, Zengliang Zang, Dan Chen, Xiaoyan Ma, Yanfei Liang, Wei You, Xiaobin Pan, Liqiong Wang, Daichun Wang and Zhendong Zhang
Remote Sens. 2022, 14(1), 220; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010220 - 04 Jan 2022
Cited by 21 | Viewed by 2724
Abstract
Emission inventories are important for modeling studies and policy-making, but the traditional “bottom-up” emission inventories are often outdated with a time lag, mainly due to the lack of accurate and timely statistics. In this study, we developed a “top-down” approach to optimize the [...] Read more.
Emission inventories are important for modeling studies and policy-making, but the traditional “bottom-up” emission inventories are often outdated with a time lag, mainly due to the lack of accurate and timely statistics. In this study, we developed a “top-down” approach to optimize the emission inventory of sulfur dioxide (SO2) using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem) and a three-dimensional variational (3DVAR) system. The observed hourly surface SO2 concentrations from the China National Environmental Monitoring Center were assimilated and used to estimate the gridded concentration forecast errors of WRF-Chem. The concentration forecast errors were then converted to the emission errors by assuming a linear response from SO2 emission to concentration by grids. To eliminate the effects of modelling errors from aspects other than emissions, a strict data-screening process was conducted. Using the Multi-Resolution Emission Inventory for China (MEIC) 2010 as the a priori emission, the emission inventory for October 2015 over Mainland China was optimized. Two forecast experiments were conducted to evaluate the performance of the SO2 forecast by using the a priori (control experiment) and optimized emissions (optimized emission experiment). The results showed that the forecasts with optimized emissions typically outperformed the forecasts with 2010 a priori emissions in terms of the accuracy of the spatial and temporal distributions. Compared with the control experiment, the bias and root-mean-squared error (RMSE) of the optimized emission experiment decreased by 71.2% and 25.9%, and the correlation coefficients increased by 50.0%. The improvements in Southern China were more significant than those in Northern China. For the Sichuan Basin, Yangtze River Delta, and Pearl River Delta, the bias and RMSEs decreased by 76.4–94.2% and 29.0–45.7%, respectively, and the correlation coefficients increased by 23.5–53.4%. This SO2 emission optimization methodology is computationally cost-effective. Full article
Show Figures

Figure 1

18 pages, 29888 KiB  
Article
Satellite–Derived Topography and Morphometry for VHR Coastal Habitat Mapping: The Pleiades–1 Tri–Stereo Enhancement
by Dorothée James, Antoine Collin, Antoine Mury and Rongjun Qin
Remote Sens. 2022, 14(1), 219; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010219 - 04 Jan 2022
Cited by 7 | Viewed by 2506
Abstract
The evolution of the coastal fringe is closely linked to the impact of climate change, specifically increases in sea level and storm intensity. The anthropic pressure that is inflicted on these fragile environments strengthens the risk. Therefore, numerous research projects look into the [...] Read more.
The evolution of the coastal fringe is closely linked to the impact of climate change, specifically increases in sea level and storm intensity. The anthropic pressure that is inflicted on these fragile environments strengthens the risk. Therefore, numerous research projects look into the possibility of monitoring and understanding the coastal environment in order to better identify its dynamics and adaptation to the major changes that are currently taking place in the landscape. This new study aims to improve the habitat mapping/classification at Very High Resolution (VHR) using Pleiades–1–derived topography, its morphometric by–products, and Pleiades–1–derived imageries. A tri–stereo dataset was acquired and processed by image pairing to obtain nine digital surface models (DSM) that were 0.50 m pixel size using the free software RSP (RPC Stereo Processor) and that were calibrated and validated with the 2018–LiDAR dataset that was available for the study area: the Emerald Coast in Brittany (France). Four morphometric predictors that were derived from the best of the nine generated DSMs were calculated via a freely available software (SAGA GIS): slope, aspect, topographic position index (TPI), and TPI–based landform classification (TPILC). A maximum likelihood classification of the area was calculated using nine classes: the salt marsh, dune, rock, urban, field, forest, beach, road, and seawater classes. With an RMSE of 4 m, the DSM#2–3_1 (from images #2 and #3 with one ground control point) outperformed the other DSMs. The classification results that were computed from the DSM#2–3_1 demonstrate the importance of the contribution of the morphometric predictors that were added to the reference Red–Green–Blue (RGB, 76.37% in overall accuracy, OA). The best combination of TPILC that was added to the RGB + DSM provided a gain of 13% in the OA, reaching 89.37%. These findings will help scientists and managers who are tasked with coastal risks at VHR. Full article
Show Figures

Figure 1

20 pages, 19696 KiB  
Article
Retrieval of DTM under Complex Forest Stand Based on Spaceborne LiDAR Fusion Photon Correction
by Bin Li, Guangpeng Fan, Tianzhong Zhao, Zhuo Deng and Yonghui Yu
Remote Sens. 2022, 14(1), 218; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010218 - 04 Jan 2022
Cited by 6 | Viewed by 2274
Abstract
The new generation of satellite-borne laser radar Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) data has been successfully used for ground information acquisition. However, when dealing with complex terrain and dense vegetation cover, the accuracy of the extracted understory Digital Terrain Model (DTM) [...] Read more.
The new generation of satellite-borne laser radar Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) data has been successfully used for ground information acquisition. However, when dealing with complex terrain and dense vegetation cover, the accuracy of the extracted understory Digital Terrain Model (DTM) is limited. Therefore, this paper proposes a photon correction data processing method based on ICESat-2 to improve the DTM inversion accuracy in complex terrain and high forest coverage areas. The correction value is first extracted based on the ALOS PALSAR DEM reference data to correct the cross-track photon data of ICESat-2. The slope filter threshold is then selected from the reference data, and the extracted possible ground photons are slope filtered to obtain accurate ground photons. Finally, the impacts of cross-track photon and slope filtering on fine ground extraction from the ICESat-2 data are discussed. The results show that the proposed photon correction and slope filtering algorithms help to improve the extraction accuracy of forest DTM in complex terrain areas. Compared with the forest DTM extracted without the photon correction and slope filtering methods, the MAE (Mean Absolute Error) and RMSE (Root Mean Square Error) are reduced by 51.90~57.82% and 49.37~53.55%, respectively. To the best of our knowledge, this is the first study demonstrating that photon correction can improve the terrain inversion ability of ICESat-2, while providing a novel method for ground extraction based on ICESat-2 data. It provides a theoretical basis for the accurate inversion of canopy parameters for ICESat-2. Full article
Show Figures

Graphical abstract

17 pages, 2443 KiB  
Article
A Bidirectional Deep-Learning-Based Spectral Attention Mechanism for Hyperspectral Data Classification
by Bishwas Praveen and Vineetha Menon
Remote Sens. 2022, 14(1), 217; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010217 - 04 Jan 2022
Cited by 8 | Viewed by 2149
Abstract
Hyperspectral remote sensing presents a unique big data research paradigm through its rich information captured across hundreds of spectral bands, which embodies vital spatial and temporal information about the underlying land cover. Deep-learning-based hyperspectral data analysis methodologies have made significant advancements over the [...] Read more.
Hyperspectral remote sensing presents a unique big data research paradigm through its rich information captured across hundreds of spectral bands, which embodies vital spatial and temporal information about the underlying land cover. Deep-learning-based hyperspectral data analysis methodologies have made significant advancements over the past few years. Despite their success, most deep learning frameworks for hyperspectral data classification tend to suffer in terms of computational and classification efficacy as the data size increases. This is largely due to their equal emphasis criteria on the rich spectral information present in the data, albeit all of the spectral information not being essential for hyperspectral data analysis. On the contrary, this redundant information present in the spectral bands can deter the performance of hyperspectral data analysis techniques. Therefore, in this work, we propose a novel bidirectional spectral attention mechanism, which is computationally efficient and capable of adaptive spectral information diversification through selective emphasis on spectral bands that comprise more information and suppress the ones with lesser information. The concept of 3D-convolutions in tandem with bidirectional long short-term memory (LSTM) is used in the proposed architecture as spectral attention mechanism. A feedforward neural network (FNN)-based supervised classification is then performed to validate the performance of our proposed approach. Experimental results reveal that the proposed hyperspectral data analysis model with spectral attention mechanism outperforms other spatial- and spectral-information-extraction-based hyperspectral data analysis techniques compared. Full article
Show Figures

Figure 1

18 pages, 4766 KiB  
Article
Potential of Multiway PLS (N-PLS) Regression Method to Analyse Time-Series of Multispectral Images: A Case Study in Agriculture
by Eva Lopez-Fornieles, Guilhem Brunel, Florian Rancon, Belal Gaci, Maxime Metz, Nicolas Devaux, James Taylor, Bruno Tisseyre and Jean-Michel Roger
Remote Sens. 2022, 14(1), 216; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010216 - 04 Jan 2022
Cited by 12 | Viewed by 2898
Abstract
Recent literature reflects the substantial progress in combining spatial, temporal and spectral capacities for remote sensing applications. As a result, new issues are arising, such as the need for methodologies that can process simultaneously the different dimensions of satellite information. This paper presents [...] Read more.
Recent literature reflects the substantial progress in combining spatial, temporal and spectral capacities for remote sensing applications. As a result, new issues are arising, such as the need for methodologies that can process simultaneously the different dimensions of satellite information. This paper presents PLS regression extended to three-way data in order to integrate multiwavelengths as variables measured at several dates (time-series) and locations with Sentinel-2 at a regional scale. Considering that the multi-collinearity problem is present in remote sensing time-series to estimate one response variable and that the dataset is multidimensional, a multiway partial least squares (N-PLS) regression approach may be relevant to relate image information to ground variables of interest. N-PLS is an extension of the ordinary PLS regression algorithm where the bilinear model of predictors is replaced by a multilinear model. This paper presents a case study within the context of agriculture, conducted on a time-series of Sentinel-2 images covering regional scale scenes of southern France impacted by the heat wave episode that occurred on 28 June 2019. The model has been developed based on available heat wave impact data for 107 vineyard blocks in the Languedoc-Roussillon region and multispectral time-series predictor data for the period May to August 2019. The results validated the effectiveness of the proposed N-PLS method in estimating yield loss from spectral and temporal attributes. The performance of the model was evaluated by the R2 obtained on the prediction set (0.661), and the root mean square of error (RMSE), which was 10.7%. Limitations of the approach when dealing with time-series of large-scale images which represent a source of challenges are discussed; however, the N–PLS regression seems to be a suitable choice for analysing complex multispectral imagery data with different spectral domains and with a clear temporal evolution, such as an extreme weather event. Full article
Show Figures

Graphical abstract

20 pages, 7243 KiB  
Article
FCAU-Net for the Semantic Segmentation of Fine-Resolution Remotely Sensed Images
by Xuerui Niu, Qiaolin Zeng, Xiaobo Luo and Liangfu Chen
Remote Sens. 2022, 14(1), 215; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010215 - 04 Jan 2022
Cited by 6 | Viewed by 3180
Abstract
The semantic segmentation of fine-resolution remotely sensed images is an urgent issue in satellite image processing. Solving this problem can help overcome various obstacles in urban planning, land cover classification, and environmental protection, paving the way for scene-level landscape pattern analysis and decision [...] Read more.
The semantic segmentation of fine-resolution remotely sensed images is an urgent issue in satellite image processing. Solving this problem can help overcome various obstacles in urban planning, land cover classification, and environmental protection, paving the way for scene-level landscape pattern analysis and decision making. Encoder-decoder structures based on attention mechanisms have been frequently used for fine-resolution image segmentation. In this paper, we incorporate a coordinate attention (CA) mechanism, adopt an asymmetric convolution block (ACB), and design a refinement fusion block (RFB), forming a network named the fusion coordinate and asymmetry-based U-Net (FCAU-Net). Furthermore, we propose novel convolutional neural network (CNN) architecture to fully capture long-term dependencies and fine-grained details in fine-resolution remotely sensed imagery. This approach has the following advantages: (1) the CA mechanism embeds position information into a channel attention mechanism to enhance the feature representations produced by the network while effectively capturing position information and channel relationships; (2) the ACB enhances the feature representation ability of the standard convolution layer and captures and refines the feature information in each layer of the encoder; and (3) the RFB effectively integrates low-level spatial information and high-level abstract features to eliminate background noise when extracting feature information, reduces the fitting residuals of the fused features, and improves the ability of the network to capture information flows. Extensive experiments conducted on two public datasets (ZY-3 and DeepGlobe) demonstrate the effectiveness of the FCAU-Net. The proposed FCAU-Net transcends U-Net, Attention U-Net, the pyramid scene parsing network (PSPNet), DeepLab v3+, the multistage attention residual U-Net (MAResU-Net), MACU-Net, and the Transformer U-Net (TransUNet). Specifically, the FCAU-Net achieves a 97.97% (95.05%) pixel accuracy (PA), a 98.53% (91.27%) mean PA (mPA), a 95.17% (85.54%) mean intersection over union (mIoU), and a 96.07% (90.74%) frequency-weighted IoU (FWIoU) on the ZY-3 (DeepGlobe) dataset. Full article
(This article belongs to the Section Remote Sensing Image Processing)
Show Figures

Figure 1

19 pages, 7963 KiB  
Article
Assessment of the Performance of TROPOMI NO2 and SO2 Data Products in the North China Plain: Comparison, Correction and Application
by Chunjiao Wang, Ting Wang, Pucai Wang and Wannan Wang
Remote Sens. 2022, 14(1), 214; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010214 - 04 Jan 2022
Cited by 12 | Viewed by 2690
Abstract
The TROPOspheric Monitoring Instrument (TROPOMI) aboard the Sentinel-5 Precursor satellite has been used to detect the atmospheric environment since 2017, and it is of great significance to investigate the accuracy of its products. In this work, we present comparisons between TROPOMI tropospheric NO [...] Read more.
The TROPOspheric Monitoring Instrument (TROPOMI) aboard the Sentinel-5 Precursor satellite has been used to detect the atmospheric environment since 2017, and it is of great significance to investigate the accuracy of its products. In this work, we present comparisons between TROPOMI tropospheric NO2 and total SO2 products against ground-based MAX-DOAS at a single site (Xianghe) and OMI products over a seriously polluted region (North China Plain, NCP) in China. The results show that both NO2 and SO2 data from three datasets exhibit a similar tendency and seasonality. In addition, TROPOMI tropospheric NO2 columns are generally underestimated compared with collocated MAX-DOAS and OMI data by about 30–60%. In contrast to NO2, the monthly average SO2 retrieved from TROPOMI is larger than MAX-DOAS and OMI, with a mean bias of 2.41 (153.8%) and 2.17 × 1016 molec cm−2 (120.7%), respectively. All the results demonstrated that the TROPOMI NO2 as well as the SO2 algorithms need to be further improved. Thus, to ensure reliable analysis in NCP area, a correction method has been proposed and applied to TROPOMI Level 3 data. The revised datasets agree reasonably well with OMI observations (R > 0.95 for NO2, and R > 0.85 for SO2) over the NCP region and have smaller mean biases with MAX-DOAS. In the application during COVID-19 pandemic, it showed that the NO2 column in January-April 2020 decreased by almost 25–45% compared to the same period in 2019 due to the lockdown for COVID-19, and there was an apparent rebound of nearly 15–50% during 2021. In contrast, a marginal change of the corresponding SO2 is revealed in the NCP region. It signifies that short-term control measures are expected to have more effects on NO2 reduction than SO2; conversely, we need to recognize that although the COVID-19 lockdown measures improved air quality in the short term, the pollution status will rebound to its previous level once industrial and human activities return to normal. Full article
Show Figures

Figure 1

24 pages, 7008 KiB  
Article
A Novel Real-Time Echo Separation Processing Architecture for Space–Time Waveform-Encoding SAR Based on Elevation Digital Beamforming
by Jinsong Qiu, Zhimin Zhang, Zhen Chen, Shuo Han, Wei Wang, Yuhao Wen, Xiangrui Meng and Huaitao Fan
Remote Sens. 2022, 14(1), 213; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010213 - 04 Jan 2022
Cited by 5 | Viewed by 1817
Abstract
Space–time waveform-encoding (STWE) SAR can receive echoes from multiple sub-swaths simultaneously with a single receive window. The echoes overlap each other in the time domain. To separate the echoes from different directions, traditional schemes adapt single-null steering techniques for digital receive beam patterns. [...] Read more.
Space–time waveform-encoding (STWE) SAR can receive echoes from multiple sub-swaths simultaneously with a single receive window. The echoes overlap each other in the time domain. To separate the echoes from different directions, traditional schemes adapt single-null steering techniques for digital receive beam patterns. However, the problems of spaceborne DBF-SAR, in practice, such as null extension loss, terrain undulation, elevation angle of arrival extension, and spaceborne antenna beam control, make the conventional scheme unable to effectively separate the echoes from different sub-swaths, which overlap each other in the time domain.A novel multi-null constrained echo separation scheme is proposed to overcome the shortcomings of the conventional scheme. The proposed algorithm can flexibly adjust the width of the notch to track the time-varying pulse extension angle with less resource consumption. Moreover, the hardware implementation details of the corresponding real-time processing architecture are discussed. The two-dimensional simulation results indicate that the proposed scheme can effectively improve the performance of echo separation. The effectiveness of the proposed method is verified by raw data processing instance of an X-band 16-channel DBF-SAR airborne system. Full article
Show Figures

Figure 1

33 pages, 37286 KiB  
Article
Impact of Water Level Fluctuations on Landslide Deformation at Longyangxia Reservoir, Qinghai Province, China
by Shufen Zhao, Runqiang Zeng, Hongxue Zhang, Xingmin Meng, Zonglin Zhang, Xiangpei Meng, Hong Wang, Yi Zhang and Jun Liu
Remote Sens. 2022, 14(1), 212; https://0-doi-org.brum.beds.ac.uk/10.3390/rs14010212 - 04 Jan 2022
Cited by 12 | Viewed by 2626
Abstract
The construction of Longyangxia Reservoir has altered the hydrogeological conditions of its banks. Infiltration and erosion caused by the periodic rise and fall of the water level leads to collapse of the reservoir banks and local deformation of the landslide. Due to heterogeneous [...] Read more.
The construction of Longyangxia Reservoir has altered the hydrogeological conditions of its banks. Infiltration and erosion caused by the periodic rise and fall of the water level leads to collapse of the reservoir banks and local deformation of the landslide. Due to heterogeneous topographic characteristics across the region, water level also varies between different location. Previous research on the influence of fluctuations in reservoir water level on landslide deformation has focused on single-point monitoring of specific slopes, and single-point water level monitoring data have often been used instead of water level data for the entire reservoir region. In addition, integrated remote sensing methods have seldom been used for regional analysis. In this study, the freely-available Landsat8 OLI and Sentinel-2 data were used to extract the water level of Longyangxia Reservoir using the NDWI method, and Sentinel-1A data were used to obtain landslide deformation time series using SBAS-InSAR technology. Taking the Chana, Chaxi, and Mangla River Estuary landslides (each having different reservoir water level depths) as typical examples, the influence of changes in reservoir water level on the deformation of three wading landslides was analyzed. Our main conclusions are as follows: First, the change in water level is the primary external factor controlling the deformation velocity and trend of landslides in the Longyangxia Reservoir, with falling water levels having the greatest influence. Second, the displacement of the Longyangxia Reservoir landslides lags water level changes by 0 to 62 days. Finally, this study provides a new method applicable other areas without water level monitoring data. Full article
Show Figures

Figure 1

Previous Issue
Back to TopTop