Next Article in Journal
The Effect of Baby Schema in Cats on Length of Stay in an Irish Animal Shelter
Next Article in Special Issue
The Manifold Bioactivity and Immunoreactivity of Microbial Proteins of Cow and Human Mature Milk in Late Lactation
Previous Article in Journal
The Effects of Different Forms of Butyric Acid on the Performance of Turkeys, Carcass Quality, Incidence of Footpad Dermatitis and Economic Efficiency
Previous Article in Special Issue
Are Local Dairy Products Better? Using Principal Component Analysis to Investigate Consumers’ Perception towards Quality, Sustainability, and Market Availability
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Antibiotic Resistance Carriage Causes a Lower Survivability Due to Stress Associated with High-Pressure Treatment among Strains from Starter Cultures

1
Department of Industrial and Food Microbiology, Faculty of Food Science, University of Warmia and Mazury in Olsztyn Plac Cieszyński 1, 10-719 Olsztyn, Poland
2
Department of Meat Technology and Chemistry, Faculty of Food Science, University of Warmia and Mazury, Plac Cieszyński 1, 10-719 Olsztyn, Poland
*
Author to whom correspondence should be addressed.
Submission received: 5 May 2022 / Revised: 26 May 2022 / Accepted: 2 June 2022 / Published: 4 June 2022

Abstract

:

Simple Summary

High-pressure processing is one of the most promising novel food preservation methods that is increasingly used in the food industry. It is applied in various food products such as dairy, meat, juices, and jams to improve safety and shelf-life by the inactivation of microorganisms and preserving of quality attributes. It is reported that the level of antibiotic resistance may influence the ability of strains to survive stress conditions. In this study, it was investigated if carrying antibiotic resistance genes affects the survival of lactic acid bacteria (Lactococcus and the former Lactobacillus) strains during high-pressure treatment. It was demonstrated that carrying antibiotic resistance genes strains showed a lower survival in response to pressure than strains carrying up to one resistance gene. The same observations were made for both genera. Appropriately selected parameters of high-pressure treatment may help in the elimination of antibiotic-resistant strains.

Abstract

High-pressure processing is one of the most promising novel food preservation methods that is increasingly used in the food industry. Its biggest advantage is that it is a nonthermal method that ensures the microbiological safety of the product while maintaining other features, including nutritional value. If products made with starter cultures are subjected to high-pressure treatment, the process parameters should be selected so as not to eliminate all microorganisms in the product. The aim of the study was to investigate if carrying antibiotic resistance genes affects the survival of lactic acid bacteria (Lactococcus and the former Lactobacillus) strains during high-pressure treatment. Survival was assessed using the plate count method. It was shown that the strains carrying antibiotic resistance genes showed a lower survival to high pressure. This might be explained by the phenomenon of fitness cost, consisting in a reduced adaptation of antibiotic-resistant strains related to metabolic expenditure. The obtained results indicate the need for further research in this field and the need to select food processing parameters depending on the strains intentionally included in the food.

1. Introduction

High-pressure processing (HPP) is a novel nonthermal food preservation technology gaining increasingly more applications in the food industry. This method is able to improve the food quality, due to its ability to increase food safety and its shelf-life by the inactivation of microorganisms and preserving of quality attributes [1,2]. It involves the application of ultra-high pressure (from 100 MPa to 600 MPa) for 30 s to several minutes [3].
HPP treatment affects the functional properties of food proteins. Because of these physicochemical changes, HPP can improve important quality characteristics of food [4,5]. HPP has advantages over thermal methods of food preservation from the sensory and nutritional quality of food point of view. This is due to the use of low temperatures and a short treatment time [6]. Pottier et al. [7] indicated the possibility of using high-pressure processing in a hurdle technology to reduce food additives and salt amounts. They also highlighted the potential of HPP to improve digestibility and to reduce the allergenicity of food. The application of HPP in the food industry has become more popular in recent years. It is applied in various food industries mainly in dairy, meat, juices, and jams production [8].
Starter cultures are the preparation of selected individual or mixed strains. These microorganisms, due to their enzymatic activity, transform substrates into products that give food products certain characteristics [9]. Starter cultures, composed mainly of lactic acid bacteria (LAB), play an essential role in the manufacture of fermented food products. They produce lactic acid, which contributes to food texture, moisture content, flavor, and aroma, and increases food safety [9,10]. Starter cultures are used in the food industry in a variety of food products, including dairy products and fermented meats. Among many LAB, which are used as starter cultures in dairy and meat products, strains of former Lactobacillus genus such as L. sakei, L. curvatus, L. plantarum, L. rhamnosus, L. casei, and L. acidophilus might be listed [11,12]. Other than Lactobacillus sp., microorganisms are also used in starter cultures, but only in the production of selected foods, for example, coagulase-negative staphylococci such as Staphylococcus xylosus and Staphylococcus carnosus (meat starter cultures), pediococci such as Pediococcus pentosaceus and Pediococcus acidilactici (meat starter cultures), and Propionibacterium (hard ripened cheese starter cultures) [13].
Available studies on the response of LAB to stress caused by high pressure have focused on changes in the bacterial cell structure, metabolism, growth, and viability. As it was reported previously by Bucka-Kolendo et al. [14], high pressure can induce changes in the bacterial proteome and in protein conformation as well as inhibit their acidifying activity [15]. Previous studies have consistently shown reduced amounts of both Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus commonly used as yoghurt starters as a result of HPP. Some authors have also reported the loss of culturability in response to high-pressure treatment; however, it depended on the value of applied pressure. However, preservation of food obtained with the use of starter cultures seems to be a very promising technique. It is reported that lactic acid bacteria are more resistant to high pressure than other microorganisms. This opens up wide opportunities for the development of fermented products with an extended shelf life, as the spoilage pathogens and microorganisms can be effectively eliminated while the microorganisms derived from the starter cultures remain viable [6,16,17,18,19].
HHP-induced cell inactivation is mainly related to protein denaturation, which can cause enzyme inactivation and cell protein agglomeration. LAB under stress conditions can activate their defense mechanisms, manifesting in stress-related protein secretion [14].
It is reported that antimicrobial resistance is associated with a fitness cost expressed in growth rate reduction and a lower stress resistance, competitive ability, or virulence potential. This cost is considered as important in the evolutionary dynamics of resistance [20]. One of the factors that could potentially determine the cost of resistance is the genetic basis of resistance. Resistance can result either from chromosomal mutation or the acquisition of mobile genetic elements (MGEs). The fitness cost of resistance differs between MGEs acquisition and mutations. It is reported that resistance resulting from the presence of MGEs has a lower fitness cost than resistance resulting from chromosomal mutations. The low cost of plasmid-associated resistance might help explain why plasmids play a predominant role in the resistance evolution, especially when combined with their ability to horizontally spread [21]. However, the plasmid acquisition fitness cost increases with plasmid resistance range [20]. It has been suggested that in an antibiotic-free environment, the acquisition of antibiotic resistance imposes an overall burden on the resistant organism and it would be conquered by a susceptible wild-type organism [22]. It is presumed that the fitness cost endured by bacteria due to resistance genes is more potent under stressful conditions, which lead to the activation of adaptive responses and significantly reduce the fitness of the strains. Fitness cost generally increases with the stress value and, while imposed by some resistance phenotypes, is more severe under stress than under nonstressful conditions. The biological significance of fitness cost depends not only on the growth rate but also on the colonization capacity and the viability of the strain [23,24].
The aim of the study was to assess the survival of LAB strains used in starter cultures in response to stress related to HPP technology depending on the presence of antibiotic resistance genes. The hypothesis that LAB, used as a component of starter cultures in fermented dairy and meat products, with antibiotic resistance genes differ in survivability during HPP from strains without antibiotic resistance was tested. Due to high costs, HPP is not yet used on a large scale in the food industry, which is why HPP should be treated as a stress factor and this research as basic in nature. However, it is worth paying attention to the technological potential in the future.

2. Materials and Methods

2.1. Strains

Strains from the collection of the Department of Food and Industrial Microbiology of the University of Warmia and Mazury in Olsztyn compiled previously were selected for analysis [25]. A total number of 16 strains was selected for analysis. Eight of them carried up to one antibiotic resistance gene, and the remaining eight carried more than one antibiotic resistance gene. Minimum Inhibitory Concentrations (MICs) of antibiotics for each strain were determined using gradient strips on Muller–Hinton agar (Merck, Germany) as described previously [25]. Half of the strains belonged to the Lactococcus genus (L. lactis ssp. lactis: n = 8) and the other half belonged to the former Lactobacillus genus (Latilactobacillus curvatus: n = 1, Lacticaseibacillus paracasei: n = 2, Lactiplantibacillus paraplantarum: n = 2, Lactobacillus delbrueckii: n = 1, and Lactobacillus sp.: n = 2). However, for the sake of uniformity in the content of the article, the authors will use the term Lactobacillus to describe the entire group of microorganisms. The characteristics of the strains selected for analysis is summarized in Table 1.

2.2. High-Pressure Processing

In order to select the pressure values for the analysis, preliminary studies were carried out at pressures of 300, 400, 500, and 600 MPa. The pressure values were selected based on the analysis of literature data as the most frequently used pressures in food preservation and on the basis of the results of other studies conducted by the research team. Each of these pressure values was applied for 1, 3, and 5 min. After the pressure treatment, a series of ten-fold dilutions were made and the number of colony-forming units (CFU)/mL was determined on de Man, Rogosa, and Sharpe (MRS) agar (Merck, Germany) for the pressurized and unpressurized samples. The analyses were carried out in triplicate on different days. Pressure/time values, which significantly but not completely reduced the number of cells relative to the nonpressurized sample, were selected for the further analysis.
High-pressure treatment was applied to strains cultures from the stationary growth phase in the amount of 10 mL. The strains were cultured in de Man, Rogosa, and Sharpe (MRS) broth (Merck, Darmstadt, Germany) under anaerobic conditions in 30 °C. The pressurization was carried out in glycol-water solution (1:1, v/v) using the high-pressure single-chamber U4040 (IWC PAN, Warsaw, Poland, Unipress Equipment Division). Temperature was maintained at 20 ± 3 °C, the pressure rise rate was 300 MPa/min, and the pressure relief time was less than 5 s as described previously [26]. The procedure was subjected to cultures of isolates (10 mL) on MRS broth (Merck, Germany) from the stationary growth phase.
After the stress treatment was completed, the samples were immediately subjected to the next stages of the study.

2.3. Survival Analysis

The survival of the strains was checked by the plate count method. For this purpose, a series of ten-fold dilutions were made for each strain before and after exposure to the stress factor, and the number of colony-forming units (CFU)/mL on MRS agar was determined. The number of colonies was counted after 48 h of incubation at 30 °C. The number of CFU/mL was determined immediately after high-pressure treatment and after 72 h of storage at room temperature to determine whether the regeneration of damaged cells occurred.

2.4. Statistical Analysis

The results were presented as log CFU/mL mean values with standard deviations (SD). To examine the differences between mean values, analysis of variance was conducted along with Tukey’s test at p < 0.05. A three-way ANOVA was applied to evaluate the effect of genus (2 levels: Lactococcus and Lactobacillus), high-pressure treatment conditions (5 levels: control, 300 MPa/3 min, 300 MPa/5 min, 400 MPa/1 min, 400 MPa/3 min) and number of antibiotic resistance genes (2 levels: up to one and more than one) on HPP survival. Only significant interactions were shown. Statistical analyses were conducted in STATISTICA 13.3 StatSoft® software (Tibco, Inc., Tulsa, OK, USA).

3. Results

After the preliminary studies, the following pressurization parameters were selected for the analysis: 300 MPa/3 min, 300 MPa/5 min, 400 MPa/1 min, and 400 MPa/3 min. The mentioned pressure and time values were selected on the basis of the results obtained in the preliminary study. The selection was made in such a way as to obtain a significant decrease in the number of cells but, simultaneously, to avoid the total inactivation of the bacterial cells. The analysis of the strains survival in response to high-pressure-induced stress showed that strains carrying more than one antibiotic resistance gene showed a lower survival ability. After exposure to 300 MPa, regardless of the pressurization time, the number of CFU/mL decreased by, at most, 1 log cycle, while the application of pressure of 400 MPa led to a reduction in the number of CFU/mL by as much as 8 log cycles. Statistical analysis showed that the decrease in the number of CFU/mL was statistically significant depending on number of antibiotic resistance genes. Looking at the differences in the number of CFU/mL depending on the pressure used and the treatment time, statistically significant differences were only observed after applying a pressure of 400 MPa for 1 and 3 min. No significant differences in survival were observed between Lactobacillus and Lactococcus strains (Table 2 and Table 3). After storing the samples at room temperature for 72 h, an increase in the number of CFU/mL was observed. The cells number in the samples pressurized at 300 MPa reached the initial level (Table 3 and Table 4).

4. Discussion

In this study, a significant reduction in CFU/mL was observed in response to the stress induced by high pressure immediately after the treatment; after 72 h of storage, an increase in the number of CFU/mL was observed; however, the cells number did not reach the initial level when 400 MPa was used. This may suggest that during storage, damaged cells that were unable to grow immediately after pressurization might regenerate. The result was adequate to previous studies [27]. Pega et al. [28] indicated that pressure values below 300–400 MPa applied for up to 10 min were adequate to maintain the required amount of starter LAB in yoghurt. In the study by Li et al. [29], the number of LAB was significantly reduced at 300 MPa for 10 min at 4 °C from 7 to 4–5 log cycles immediately after the treatment, and the number of LAB in kimchi after treatment at 600 MPa was still detected at the level of 3 log cycles. Immediately after pressurization, the number of LAB cells was significantly reduced to 4.6, 3.9, and 2.7 log cycles at 400 MPa for 10, 20, and 30 min, respectively. After storage, an increased LAB count was observed, reaching the initial level after 5 days at 37 °C. Significantly increased counts were also observed during storage at room temperature. Lee et al. [30] also reported a reduction in the LAB counts immediately after pressurization at 400 MPa, but after a 15-day storage at 10 °C, the counts increased and were finally at the initial level. To date, there are many studies about the recovery of bacterial cells injured by high pressure during storage under various conditions. However, it is worth taking into consideration that the increase in LAB counts may result simultaneously from the repair of injured cells and the growth of living bacteria, which survived HPP [31].
An important point often overlooked in the subject of antibiotic resistance is that the development of antibiotic resistance can affect the behavior of microorganisms under food processing conditions. It is suggested that antibiotic-resistant bacteria may show different growth kinetics in laboratory media and may show different resistance to food processing stresses. Nevertheless, there is a lack of research focused on the relationship between antibiotic resistance and food-related stresses, especially in relation to nonpathogenic microorganisms. Therefore, the present study provides insight into this issue.
The present study also demonstrated that carrying antibiotic resistance genes strains showed a lower survival in response to pressure than strains carrying up to one resistance gene. The same observations were made for both Lactobacillus and Lactococcus strains. This might be explained by the phenomenon of fitness cost, manifested by a decrease in the stress resistance of strains that are burdened with the presence of antibiotic resistance genes. According to the literature, antibiotic resistance might affect the bacterial physiology including biofilm formation, virulence potential, and survival under stressful conditions [32]. It was found that the genetic basis of resistance plays a key role in determining its costs; plasmid acquisition tends to carry a much smaller cost than evolving resistance de novo by chromosomal mutation [20,33]. Different works support the hypothesis that the plasmid acquisition carrying resistance genes requires novel metabolic resources, which is reflected in a fitness cost [34,35,36]. It is still conceivable that resistant organisms might be outcompeted by susceptible ones [37].
The cost of resistance genes carriage is described widely, while the mechanisms responsible for those costs are still unclear. Several possible explanations have been proposed, mainly metabolic load of the new genes replication and expression. According to this hypothesis, some authors have reported that the deletion of a plasmid, associated with the loss of an antibiotic resistance gene, reduced fitness costs [38,39]. It is reported that the cost of plasmids carrying one resistance gene is lower than the cost of multi-drug resistance plasmids. It suggests that the cost of resistance increases with levels of multidrug resistance. Moreover, a significant correlation between the plasmid cost and the number of antibiotic groups to which that plasmid confers resistance was shown [40,41].
The phenomenon of antibiotic resistance is undesirable not only in relation to pathogenic strains, but also to microorganisms intentionally added to food. As these microorganisms are abundant in food, they risk being involved in the horizontal spread of resistance. The obtained results are optimistic in this respect, as they suggest that appropriately selected parameters of high-pressure treatment may help in the elimination of antibiotic-resistant strains.
The obtained results open the door for further research in this area in order to expand the knowledge in this field, which would allow the demonstration of which genes/mechanisms of resistance have the greatest impact on the survival of strains in response to high-pressure stress.

5. Conclusions

The obtained results suggest that the presence of antibiotic resistance genes in the bacterial genome may affect the strain’s ability to survive the effects of stress factors. As a result, survival under the influence of a stress factor becomes an individual feature of the strain. The hypothesis that the presence of antibiotic resistance genes is associated with the ability of LAB strains to survive HPP was proven. It was found that multi-antibiotic-resistant strains were more susceptible to HPP. Further research should be conducted to show whether a similar relationship would be obtained in food due to the fact that it is a much more complex system. Therefore, in the case of food produced with the use of starter cultures, it is important to properly select the parameters of the high-pressure treatment in order to ensure the appropriate number of bacterial cells in the product.

Author Contributions

Conceptualization, U.Z. and A.Z.; methodology, U.Z., A.Z. and W.C.-W.; validation, U.Z. and K.W.; formal analysis, U.Z., A.Z., W.C.-W. and M.M.-K.; investigation, U.Z. and K.W.; data curation, U.Z. and M.M.-K.; writing—original draft preparation, U.Z.; writing—review and editing, A.Z. and W.C.-W.; visualization, U.Z.; supervision, A.Z., W.C.-W. and M.M.-K.; project administration, U.Z.; funding acquisition, U.Z. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded in whole by the National Science Centre (Poland), Grant number: 2021/41/N/NZ9/00675. For the purpose of Open Access, the author has applied a CC-BY public copyright license to any Author Accepted Manuscript (AAM) version arising from this submission.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The dataset used during this study is available from the author upon reasonable request.

Conflicts of Interest

The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results.

References

  1. Morales-de la Peña, M.; Welti-Chanes, J.; Martín-Belloso, O. Novel technologies to improve food safety and quality. Curr. Opin. Food Sci. 2019, 30, 1–7. [Google Scholar] [CrossRef]
  2. Nabi, B.G.; Mukhtar, K.; Arshad, R.N.; Radicetti, E.; Tedeschi, P.; Shahbaz, M.U.; Walayat, N.; Nawaz, A.; Inam-Urraheem, M.; Aadil, R.M. High-pressure processing for sustainable food supply. Sustainability 2021, 13, 13908. [Google Scholar] [CrossRef]
  3. Tabanelli, G.; Patrignani, F.; Vinderola, G.; Reinheimer, J.A.; Gardini, F.; Lanciotti, R. Effect of sub-lethal high pressure homogenization treatments on the in vitro functional and biological properties of lactic acid bacteria. LWT-Food Sci. Technol. 2013, 53, 580–586. [Google Scholar] [CrossRef]
  4. Balamurugan, S.; Gemmell, C.; Lau, A.T.Y.; Arvaj, L.; Strange, P.; Gao, A.; Barbut, S. High pressure processing during drying of fermented sausages can enhance safety and reduce time required to produce a dry fermented product. Food Cont. 2020, 113, 107224. [Google Scholar] [CrossRef]
  5. Bucka-Kolendo, J.; Sokołowska, B. Lactic acid bacteria stress response to preservation processes in the beverage and juice industry. Acta Biochim. Pol. 2017, 64, 459–464. [Google Scholar] [CrossRef]
  6. Nuñez, M.; Calzada, J.; Olmo, A. High pressure processing of cheese: Lights, shadows and prospects. Int. Dairy J. 2020, 100, 104558. [Google Scholar] [CrossRef]
  7. Pottier, L.; Villamonte, G.; de Lamballerie, M. Applications of high pressure for healthier foods. Curr. Opin. Food Sci. 2017, 16, 21–27. [Google Scholar] [CrossRef]
  8. Fam, S.N.; Khosravi-Darani, K.; Massoud, R.; Massoud, A. High-pressure processing in food. Biointer. Res. Appl. Chem. 2021, 11, 11553–11561. [Google Scholar]
  9. García-Díez, J.; Saraiva, C. Use of starter cultures in foods from animal origin to improve their safety. Int. J. Environ. Res. Pub. Health 2021, 18, 2544. [Google Scholar] [CrossRef]
  10. Laranjo, M.; Elias, M.; Fraqueza, M.J. The use of starter cultures in traditional meat products. J. Food Qual. 2017, 2017, 9546026. [Google Scholar] [CrossRef] [Green Version]
  11. Ojha, K.S.; Kerry, J.P.; Duffy, G.; Beresford, T.; Tiwari, B.K. Technological advances for enhancing quality and safety of fermented meat products. Trends Food Sci. Technol. 2015, 44, 105–116. [Google Scholar] [CrossRef]
  12. Toldrá, F. The storage and preservation of meat. Lawrie’s Meat Sci. 2017, 9, 265–296. [Google Scholar]
  13. Zarzecka, U.; Zadernowska, A.; Chajęcka-Wierzchowska, W. Starter cultures as a reservoir of antibiotic resistant microorganisms. LWT–Food Sci. Technol. 2020, 127, 109424. [Google Scholar] [CrossRef]
  14. Bucka-Kolendo, J.; Sokołowska, B.; Winiarczyk, S. Influence of high hydrostatic pressure on the identification of Lactobacillus by MALDI-TOF MS-preliminary study. Microorganisms 2020, 8, 813. [Google Scholar] [CrossRef]
  15. Giannoglou, M.; Katsaros, G.; Moatsou, G.; Taoukis, P. Effect of high hydrostatic pressure treatment on the viability and acidification ability of lactic acid bacteria. Int. Dairy J. 2019, 96, 50–57. [Google Scholar] [CrossRef]
  16. Siroli, L.; Braschi, G.; Rossi, S.; Gottardi, D.; Patrignani, F.; Lanciotti, R. Lactobacillus paracasei A13 and high-pressure homogenization stress response. Microorganisms 2020, 8, 439. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  17. Li, H.; Sun, X.; Liao, X.; Gänzle, M. Control of pathogenic and spoilage bacteria in meat and meat products by high pressure: Challenges and future perspectives. Compr. Rev. Food Sci. Food Saf. 2020, 19, 3476–3500. [Google Scholar] [CrossRef]
  18. Yang, D.; Zhang, Y.; Zhao, L.; Wang, Y.; Rao, L.; Liao, X. Pressure-resistant acclimation of lactic acid bacteria from a natural fermentation product using high pressure. Innov. Food Sci. Emerg. Technol. 2021, 69, 102660. [Google Scholar] [CrossRef]
  19. Gayán, E.; Govers, S.K.; Aertsen, A. Impact of high hydrostatic pressure on bacterial proteostasis. Biophys. Chem. 2017, 231, 3–9. [Google Scholar] [CrossRef]
  20. Vogwill, T.; Maclean, R.C. The genetic basis of the fitness costs of antimicrobial resistance: A meta-analysis approach. Evol. Appl. 2015, 8, 284. [Google Scholar] [CrossRef]
  21. San Millan, A. Evolution of plasmid-mediated antibiotic resistance in the clinical context. Trends Microbiol. 2018, 26, 978–985. [Google Scholar] [CrossRef] [Green Version]
  22. Melnyk, A.H.; Wong, A.; Kassen, R.; Anita Melnyk, C.H. The fitness costs of antibiotic resistance mutations. Evol. Appl. 2014, 8, 273–283. [Google Scholar] [CrossRef] [PubMed]
  23. Petersen, A.; Aarestrup, F.M.; Olsen, J.E. The in vitro fitness cost of antimicrobial resistance in Escherichia coli varies with the growth conditions. FEMS Microbiol. Lett. 2009, 299, 53–59. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  24. Bengtsson-Palme, J.; Jonsson, V.; Heß, S. What is the role of the environment in the emergence of novel antibiotic resistance genes? A modeling approach. Environ. Sci. Technol. 2021, 55, 15734–15743. [Google Scholar] [CrossRef] [PubMed]
  25. Zarzecka, U.; Chajęcka-Wierzchowska, W.; Zadernowska, A. Microorganisms from starter and protective cultures-occurrence of antibiotic resistance and conjugal transfer of tet genes in vitro and during food fermentation. LWT–Food Sci. Technol. 2022, 153, 112490. [Google Scholar] [CrossRef]
  26. Zarzecka, U.; Zadernowska, A.; Chajęcka-Wierzchowska, W. Effects of osmotic and high pressure stress on expression of virulence factors among Enterococcus spp. isolated from food of animal origin. Food Microbiol. 2022, 102, 103900. [Google Scholar] [CrossRef]
  27. Huang, H.W.; Hsu, C.P.; Wang, C.Y. Healthy expectations of high hydrostatic pressure treatment in food processing industry. J. Food Drug Anal. 2020, 28, 1–13. [Google Scholar] [CrossRef]
  28. Pega, J.; Denoya, G.I.; Castells, M.L.; Sarquis, S.; Aranibar, G.F.; Vaudagna, S.R.; Nanni, M. Effect of high-pressure processing on quality and microbiological properties of a fermented beverage manufactured from sweet whey throughout refrigerated storage. Food Bioprocess Technol. 2018, 11, 1101–1110. [Google Scholar] [CrossRef]
  29. Li, L.; Feng, L.; Yi, J.; Hua, C.; Chen, F.; Liao, X.; Wang, Z.; Hu, X. High hydrostatic pressure inactivation of total aerobic bacteria, lactic acid bacteria, yeasts in sour Chinese cabbage. Int. J. Food Microbiol. 2010, 142, 180–184. [Google Scholar] [CrossRef]
  30. Lee, J.W.; Cha, D.S.; Hwang, K.T.; Park, H.J. Effects of CO2 absorbent and high-pressure treatment on the shelf-life of packaged kimchi products. Int. J. Food Sci. Technol. 2003, 38, 519–524. [Google Scholar] [CrossRef]
  31. Schottroff, F.; Fröhling, A.; Zunabovic-Pichler, M.; Krottenthaler, A.; Schlüter, O.; Jäger, H. Sublethal injury and viable but non-culturable (VBNC) state in microorganisms during preservation of food and biological materials by non-thermal processes. Front. Microbiol. 2018, 9, 2773. [Google Scholar] [CrossRef]
  32. Lenormand, T.; Harmand, N.; Gallet, R. Cost of resistance: An unreasonably expensive concept. Reth. Ecol. 2018, 3, 51–70. [Google Scholar] [CrossRef]
  33. Hall, J.P.J.; Wright, R.C.T.; Harrison, E.; Muddiman, K.J.; Wood, A.J.; Paterson, S.; Brockhurst, M.A. Plasmid fitness costs are caused by specific genetic conflicts enabling resolution by compensatory mutation. PLoS Biol. 2021, 19, e3001225. [Google Scholar] [CrossRef] [PubMed]
  34. Duffy, G.; Walsh, C.; Blair, I.S.; McDowell, D.A. Survival of antibiotic resistant and antibiotic sensitive strains of E. coli O157 and E. coli O26 in food matrices. Int. J. Food Microbiol. 2006, 109, 179–186. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  35. Ramadhan, A.A.; Hegedus, E. Survivability of vancomycin resistant enterococci and fitness cost of vancomycin resistance acquisition. J. Clin. Pathol. 2005, 58, 744–746. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  36. Touati, A.; Bellil, Z.; Barache, D.; Mairi, A. Fitness cost of antibiotic resistance in Staphylococcus aureus: A systematic review. Microb. Drug Resist. 2021, 27, 1218–1231. [Google Scholar] [CrossRef]
  37. Hernando-Amado, S.; Sanz-García, F.; Blanco, P.; Martínez, J.L. Fitness costs associated with the acquisition of antibiotic resistance. Essays Biochem. 2017, 61, 37–48. [Google Scholar]
  38. Porse, A.; Schønning, K.; Munck, C.; Sommer, M.O.A. Survival and evolution of a large multidrug resistance plasmid in new clinical bacterial hosts. Mol. Biol. Evol. 2016, 33, 2860–2873. [Google Scholar] [CrossRef]
  39. Carroll, A.C.; Wong, A. Plasmid persistence: Costs, benefits, and the plasmid paradox. Can. J. Microb. 2018, 64, 293–304. [Google Scholar] [CrossRef]
  40. Bottery, M.J.; Pitchford, J.W.; Friman, V.P. Ecology and evolution of antimicrobial resistance in bacterial communities. ISME J. 2020, 15, 939–948. [Google Scholar] [CrossRef]
  41. Millan, A.S.; MacLean, R.C. Fitness costs of plasmids: A limit to plasmid transmission. Microbiol. Spectr. 2017, 5, 0016-2017. [Google Scholar] [CrossRef] [Green Version]
Table 1. Strains used in the study.
Table 1. Strains used in the study.
StrainIdentificationAntibiotic MICsResistance Genes
AMPCNCTEEDAKSVA
Carrying more than 1 Resistance Gene
LAB-14L. lactis ssp.
lactis
0.190.1912480.1251.5120.1250.19tetK, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, cat
LAB-160.1918320.1250.2580.1250.094tetM, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, aac(6′)-Ia
LAB-3730.756240.1250.023160.1250.19tetM, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia
LAB-390.250.258120.190.12560.190.25tetM, tetO, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, aac(6′)-Ia
LAB-43L. curvatus0.1250.516640.1250.3860.125-tetM, tetO, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, cat
LAB-41L. paracasei10.3832320.1250.02340.125-tetW, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, aac(6′)-Ia, cat
LAB-1L. paraplantarum0.50.758120.190.560.19-tetM, tetW, aph(3’)-IIIa, aac(6′)-Ie-aph(2″)-Ia, aac(6′)-Ia, blaOXA
LAB-11L. paraplantarum0.250.3832>2560.250.2580.25-tetM, aph(3’)-IIIa, aac(6′)-Ie-aph(2′′)-Ia, aph(2′)-Ic, cat
Carrying up to 1 resistance gene
LAB-44L. lactis ssp.
lactis
1.516120.190.032240.190.19-
LAB-5931.58240.0940.023320.0940.125-
LAB-6831.516240.1250.023240.1250.19-
LAB-153181.50.1250.047320.1250.25-
LAB-42L. delbrueckii1.50.756240.250.023160.25-msrA/B
LAB-20L. paracasei0.5661.50.0640.032480.064-cat
LAB-64Lactobacillus sp.0.250.524320.0940.2580.094-cat
LAB-71Lactobacillus sp.0.380.756320.190.09440.19-aph(2′)-Ic
Abbreviations: MICs—Minimum Inhibitory Concentrations, AMP—ampicillin, CN—gentamicin, C—chloramphenicol, TE—tetracycline, E—erythromycin, DA—clindamycin, K—kanamycin, S—streptomycin, VA—vancomycin.
Table 2. Results of the survival analysis of strains in response to high-pressure treatment (mean values of log CFU/mL ± SD).
Table 2. Results of the survival analysis of strains in response to high-pressure treatment (mean values of log CFU/mL ± SD).
Strainlog CFU/mL ± SD
Control Sample300 MPa/3 min300 MPa/ 5 min400 MPa/1 min400 MPa/3 min
Carrying more than 1 resistance gene
LAB-149.13 a ± 0.088.75 a ± 0.28.23 b ± 0.073.00 c ± 0.131.08 d ± 0.13
LAB-168.91 a ± 0.088.46 a ± 0.418.12 b ± 0.053.78 c ± 0.141.38 d ± 0.27
LAB-378.99 a ± 0.108.48 a ± 0.058.34 b ± 0.164.23 c ± 0.101.26 d ± 0.07
LAB-398.92 a ± 0.168.68 a ± 0.238.13 b ± 0.133.00 c ± 0.131.32 d ± 0.26
LAB-439.33 a ± 0.158.93 a ± 0.158.69 b ± 0.213.08 c ± 0.071.00 d ± 0.07
LAB-418.88 a ± 0.108.48 a ± 0.088.17 b ± 0.313.76 c ± 0.161.30 d ± 0.33
LAB-18.92 a ± 0.108.39 a ± 0.228.24 b ± 0.234.11 c ± 0.041.30 d ± 0.33
LAB-118.91 a ± 0.118.52 a ± 0.218.20 b ± 0.213.00 c ± 0.201.32 d ± 0.13
Carrying up to 1 resistance gene
LAB-158.74 a ± 0.158.56 a ± 0.298.28 a ± 0.175.36 b ± 0.084.18 c ± 0.17
LAB-449.19 a ± 0.139.04 a ± 0.078.81 a ± 0.205.53 b ± 0.114.01 c ± 0.05
LAB-599.32 a ± 0.099.15 a ± 0.108.88 a ± 0.235.25 b ± 0.053.66 c ± 0.09
LAB-688.90 a ± 0.228.72 a ± 0.138.45 a ± 0.255.44 b ± 0.103.51 c ± 0.05
LAB-428.79 a ± 0.128.70 a ± 0.118.62 a ± 0.095.32 b ± 0.064.08 c ± 0.04
LAB-209.31 a ± 0.119.23 a ± 0.159.16 a ± 0.155.45 b ± 0.094.05 c ± 0.05
LAB-649.34 a ± 0.129.24 a ± 0.099.18 a ± 0.075.12 b ± 0.053.62 c ± 0.11
LAB-718.90 a ± 0.188.82 a ± 0.198.74 a ± 0.235.45 b ± 0.173.50 c ± 0.06
Abbreviations: control sample—before HPP; CFU—colony-forming units, SD—standard deviation; a–d mean values in rows with different letters differ significantly at p < 0.05.
Table 3. Effect of the genus, pressure conditions, and number of antibiotic resistance genes on survival of the starter culture components (mean values of log CFU/mL ± SD).
Table 3. Effect of the genus, pressure conditions, and number of antibiotic resistance genes on survival of the starter culture components (mean values of log CFU/mL ± SD).
Time (h)GenusHPP ConditionsNo of ARGsp-Value
LactococcusLactobacillus300
MPa
/3 min
300 MPa
/5 min
400 MPa
/1 min
400 MPa
/3 min
≤1>1GHPPNo of ARGsHPP*ARGs
06.62 ± 2.756.67 ± 2.818.75 a ± 0.288.51 a ± 0.354.42 b ± 1.012.5 c ± 1.317.18 ± 2.206.11 ± 3.17NS*********
726.33 ± 2.686.36 ± 2.738.89 a ± 0.268.69 a ± 0.294.87 b ± 1.042.92 c ± 1.427.02 ± 2.055.67 ± 3.09NS*********
Abbreviations: HPP—high-pressure processing, ARGs—antibiotic resistance genes, G—genus, a–c mean values in rows with different superscripts differ significantly at p < 0.05 within HPP group; NS—no significant differences (p > 0.5); *** significant differences at p < 0.001.
Table 4. Results of the survival analysis of strains in response to high-pressure treatment after 72 h of storage at room temperature (mean values of log CFU/mL ± SD).
Table 4. Results of the survival analysis of strains in response to high-pressure treatment after 72 h of storage at room temperature (mean values of log CFU/mL ± SD).
Strainlog CFU/mL ± SD
Control Sample300 MPa/3 min300 MPa/5 min400 MPa/1 min400 MPa/3 min
Carrying more than 1 resistance gene
LAB-149.13 a ± 0.088.85 a ± 0.118.52 a ± 0.113.48 b ± 0.041.40 c ± 0.12
LAB-168.91 a ± 0.088.60 a ± 0.098.45 a ± 0.064.01 b ± 0.011.61 c ± 0.09
LAB-378.99 a ± 0.108.74 a ± 0.098.52 a ± 0.034.71 b ± 0.031.51 c ± 0.16
LAB-398.92 a ± 0.168.80 a ± 0.068.44 a ± 0.153.46 b ± 0.071.70 c ± 0.08
LAB-439.33 a ± 0.158.95 a ± 0.058.72 a ± 0.213.49 b ± 0.041.40 c ± 0.18
LAB-418.88 a ± 0.108.61 a ± 0.078.42 a ± 0.074.12 b ± 0.081.60 c ± 0.08
LAB-18.92 a ± 0.108.65 a ± 0.118.49 a ± 0.054.70 b ± 0.051.56 c ± 0.10
LAB-118.91 a ± 0.118.76 a ± 0.138.33 a ± 0.073.30 b ± 0.081.60 c ± 0.07
Carrying up to 1 resistance gene
LAB-158.74 a ± 0.158.07 a ± 0.058.63 a ± 0.095.89 b ± 0.154.71 c ± 0.06
LAB-449.19 a ± 0.139.11 a ± 0.078.97 a ± 0.095.91 b ± 0.054.67 c ± 0.13
LAB-599.32 a ± 0.099.24 a ± 0.098.97 a ± 0.135.75 b ± 0.123.93 c ± 0.04
LAB-688.90 a ± 0.228.85 a ± 0.078.73 a ± 0.115.90 b ± 0.063.95 c ± 0.12
LAB-428.79 a ± 0.128.72 a ± 0.058.64 a ± 0.115.73 b ± 0.074.71 c ± 0.03
LAB-209.31 a ± 0.119.29 a ± 0.158.98 a ± 0.095.92 b ± 0.134.70 c ± 0.06
LAB-649.34 a ± 0.129.26 a ± 0.138.99 a ± 0.215.71 b ± 0.073.83 c ± 0.23
LAB-718.90 a ± 0.188.86 a ± 0.078.78 a ± 0.065.93 b ± 0.023.94 c ± 0.13
Abbreviations: control sample—before HPP; CFU—colony-forming units, SD—standard deviation; a–c mean values in rows with different letters differ significantly at p < 0.05.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Zarzecka, U.; Zadernowska, A.; Chajęcka-Wierzchowska, W.; Wiśniewska, K.; Modzelewska-Kapituła, M. Antibiotic Resistance Carriage Causes a Lower Survivability Due to Stress Associated with High-Pressure Treatment among Strains from Starter Cultures. Animals 2022, 12, 1460. https://0-doi-org.brum.beds.ac.uk/10.3390/ani12111460

AMA Style

Zarzecka U, Zadernowska A, Chajęcka-Wierzchowska W, Wiśniewska K, Modzelewska-Kapituła M. Antibiotic Resistance Carriage Causes a Lower Survivability Due to Stress Associated with High-Pressure Treatment among Strains from Starter Cultures. Animals. 2022; 12(11):1460. https://0-doi-org.brum.beds.ac.uk/10.3390/ani12111460

Chicago/Turabian Style

Zarzecka, Urszula, Anna Zadernowska, Wioleta Chajęcka-Wierzchowska, Krystyna Wiśniewska, and Monika Modzelewska-Kapituła. 2022. "Antibiotic Resistance Carriage Causes a Lower Survivability Due to Stress Associated with High-Pressure Treatment among Strains from Starter Cultures" Animals 12, no. 11: 1460. https://0-doi-org.brum.beds.ac.uk/10.3390/ani12111460

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop