Next Issue
Volume 10, May
Previous Issue
Volume 10, March
 
 

Nanomaterials, Volume 10, Issue 4 (April 2020) – 220 articles

Cover Story (view full-size image): The emergence of environmental issues and questions about process sustainability have drawn attention to lead-free perovskites, such as BiFeO3, one of the most promising materials for the next generation of lead-free harvesters. BiFeO3 films have been grown by MOCVD on silicon substrates, with an IrO2 bottom electrode, acting as a buffer layer since it can stand high temperatures. The present approach offers the major advantage of being easily scalable and the use of IrO2, as a conductive oxide, creates opportunities for future characterization and device microfabrication. This study is one of the results of the MSCA-ITN-2016 ENHANCE Project within the Horizon 2020 Programme. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
9 pages, 1458 KiB  
Article
Structural, Electronic and Magnetic Properties of a Few Nanometer-Thick Superconducting NdBa2Cu3O7 Films
by Marco Moretti Sala, Marco Salluzzo, Matteo Minola, Gabriella Maria De Luca, Greta Dellea, Vesna Srot, Yi Wang, Peter A. van Aken, Matthieu Le Tacon, Bernhard Keimer, Claudia Dallera, Lucio Braicovich and Giacomo Ghiringhelli
Nanomaterials 2020, 10(4), 817; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040817 - 24 Apr 2020
Viewed by 3512
Abstract
Epitaxial films of high critical temperature ( T c ) cuprate superconductors preserve their transport properties even when their thickness is reduced to a few nanometers. However, when approaching the single crystalline unit cell (u.c.) of thickness, T c decreases and eventually, superconductivity [...] Read more.
Epitaxial films of high critical temperature ( T c ) cuprate superconductors preserve their transport properties even when their thickness is reduced to a few nanometers. However, when approaching the single crystalline unit cell (u.c.) of thickness, T c decreases and eventually, superconductivity is lost. Strain originating from the mismatch with the substrate, electronic reconstruction at the interface and alteration of the chemical composition and of doping can be the cause of such changes. Here, we use resonant inelastic x-ray scattering at the Cu L 3 edge to study the crystal field and spin excitations of NdBa 2 Cu 3 O 7 x ultrathin films grown on SrTiO 3 , comparing 1, 2 and 80 u.c.-thick samples. We find that even at extremely low thicknesses, the strength of the in-plane superexchange interaction is mostly preserved, with just a slight decrease in the 1 u.c. with respect to the 80 u.c.-thick sample. We also observe spectroscopic signatures for a decrease of the hole-doping at low thickness, consistent with the expansion of the c-axis lattice parameter and oxygen deficiency in the chains of the first unit cell, determined by high-resolution transmission microscopy and x-ray diffraction. Full article
Show Figures

Figure 1

12 pages, 2092 KiB  
Article
Ab-Initio Study of the Electronic and Magnetic Properties of Boron- and Nitrogen-Doped Penta-Graphene
by Chao Zhang, Yu Cao, Xing Dai, Xian-Yong Ding, Leilei Chen, Bing-Sheng Li and Dong-Qi Wang
Nanomaterials 2020, 10(4), 816; https://doi.org/10.3390/nano10040816 - 24 Apr 2020
Cited by 12 | Viewed by 2743
Abstract
First-principles calculations were performed to investigate the effects of boron/nitrogen dopant on the geometry, electronic structure and magnetic properties of the penta-graphene system. It was found that the electronic band gap of penta-graphene could be tuned and varied between 1.88 and 2.12 eV [...] Read more.
First-principles calculations were performed to investigate the effects of boron/nitrogen dopant on the geometry, electronic structure and magnetic properties of the penta-graphene system. It was found that the electronic band gap of penta-graphene could be tuned and varied between 1.88 and 2.12 eV depending on the type and location of the substitution. Moreover, the introduction of dopant could cause spin polarization and lead to the emergence of local magnetic moments. The main origin of the magnetic moment was analyzed and discussed by the examination of the spin-polarized charge density. Furthermore, the direction of charge transfer between the dopant and host atoms could be attributed to the competition between the charge polarization and the atomic electronegativity. Two charge-transfer mechanisms worked together to determine which atoms obtained electrons. These results provide the possibility of modifying penta-graphene by doping, making it suitable for future applications in the field of optoelectronic and magnetic devices. Full article
(This article belongs to the Section Nanocomposite Materials)
Show Figures

Figure 1

16 pages, 2836 KiB  
Article
Enhancing the Cellular Uptake and Antibacterial Activity of Rifampicin through Encapsulation in Mesoporous Silica Nanoparticles
by Paul Joyce, Hanna Ulmefors, Sajedeh Maghrebi, Santhni Subramaniam, Anthony Wignall, Silver Jõemetsa, Fredrik Höök and Clive A. Prestidge
Nanomaterials 2020, 10(4), 815; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040815 - 24 Apr 2020
Cited by 23 | Viewed by 4441
Abstract
An urgent demand exists for the development of novel delivery systems that efficiently transport antibacterial agents across cellular membranes for the eradication of intracellular pathogens. In this study, the clinically relevant poorly water-soluble antibiotic, rifampicin, was confined within mesoporous silica nanoparticles (MSN) to [...] Read more.
An urgent demand exists for the development of novel delivery systems that efficiently transport antibacterial agents across cellular membranes for the eradication of intracellular pathogens. In this study, the clinically relevant poorly water-soluble antibiotic, rifampicin, was confined within mesoporous silica nanoparticles (MSN) to investigate their ability to serve as an efficacious nanocarrier system against small colony variants of Staphylococcus aureus (SCV S. aureus) hosted within Caco-2 cells. The surface chemistry and particle size of MSN were varied through modifications during synthesis, where 40 nm particles with high silanol group densities promoted enhanced cellular uptake. Extensive biophysical analysis was performed, using quartz crystal microbalance with dissipation (QCM-D) and total internal reflection fluorescence (TIRF) microscopy, to elucidate the mechanism of MSN adsorption onto semi-native supported lipid bilayers (snSLB) and, thus, uncover potential cellular uptake mechanisms of MSN into Caco-2 cells. Such studies revealed that MSN with reduced silanol group densities were prone to greater particle aggregation on snSLB, which was expected to restrict endocytosis. MSN adsorption and uptake into Caco-2 cells correlated well with antibacterial efficacy against SCV S. aureus, with 40 nm hydrophilic particles triggering a ~2.5-log greater reduction in colony forming units, compared to the pure rifampicin. Thus, this study provides evidence for the potential to design silica nanocarrier systems with controlled surface chemistries that can be used to re-sensitise intracellular bacteria to antibiotics by delivering them to the site of infection. Full article
(This article belongs to the Special Issue Nanomedicine in Drug Delivery)
Show Figures

Graphical abstract

20 pages, 10986 KiB  
Article
Preparation and Characterization of Polypropylene/Carbon Nanotubes (PP/CNTs) Nanocomposites as Potential Strain Gauges for Structural Health Monitoring
by Bartolomeo Coppola, Luciano Di Maio, Loredana Incarnato and Jean-Marc Tulliani
Nanomaterials 2020, 10(4), 814; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040814 - 24 Apr 2020
Cited by 33 | Viewed by 4246
Abstract
Polypropylene/carbon nanotubes (PP/CNTs) nanocomposites with different CNTs concentrations (i.e., 1, 2, 3, 5 and 7 wt%) were prepared and tested as strain gauges for structures monitoring. Such sensors were embedded in cementitious mortar prisms and tested in 3-point bending mode recording impedance variation [...] Read more.
Polypropylene/carbon nanotubes (PP/CNTs) nanocomposites with different CNTs concentrations (i.e., 1, 2, 3, 5 and 7 wt%) were prepared and tested as strain gauges for structures monitoring. Such sensors were embedded in cementitious mortar prisms and tested in 3-point bending mode recording impedance variation at increasing load. First, thermal (differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA)), mechanical (tensile tests) and morphological (FE-SEM) properties of nanocomposites blends were assessed. Then, strain-sensing tests were carried out on PP/CNTs strips embedded in cementitious mortars. PP/CNTs nanocomposites blends with CNTs content of 1, 2 and 3 wt% did not show significant results because these concentrations are below the electrical percolation threshold (EPT). On the contrary, PP/CNTs nanocomposites with 5 and 7 wt% of CNTs showed interesting sensing properties. In particular, the best result was highlighted for the PP/CNT nanocomposite with 5 wt% CNTs for which an average gauge factor (GF) of approx. 1400 was measured. Moreover, load-unload cycles reported a good recovery of the initial impedance. Finally, a comparison with some literature results, in terms of GF, was done demonstrating the benefits deriving from the use of PP/CNTs strips as strain-gauges instead of using conductive fillers in the bulk matrix. Full article
(This article belongs to the Special Issue Carbon Nanoparticles for Strain Sensing and Damage Monitoring)
Show Figures

Figure 1

17 pages, 7147 KiB  
Article
Synergy Effect of Au and SiO2 Modification on SnO2 Sensor Properties in VOCs Detection in Humid Air
by Dayana Gulevich, Marina Rumyantseva, Evgeny Gerasimov, Nikolay Khmelevsky, Elena Tsvetkova and Alexander Gaskov
Nanomaterials 2020, 10(4), 813; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040813 - 23 Apr 2020
Cited by 18 | Viewed by 3844
Abstract
Nanocomposites based on Au- and SiO2-modified SnO2 were studied as sensitive materials for ethanol and benzene detection in dry (RH = 1%) and humid (RH = 20%) air. Modification of SnO2 by amorphous SiO2 (13 mol.%) was effectuated [...] Read more.
Nanocomposites based on Au- and SiO2-modified SnO2 were studied as sensitive materials for ethanol and benzene detection in dry (RH = 1%) and humid (RH = 20%) air. Modification of SnO2 by amorphous SiO2 (13 mol.%) was effectuated by hydrothermal synthesis; modification by Au nanoparticles (1 wt.%) was carried out via impregnation by citrate-stabilized Au sol. The composition of the samples was determined by X-ray fluorescent spectroscopy and energy-dispersive X-ray spectroscopy. The microstructure was characterized by XRD, HRTEM, and low-temperature nitrogen adsorption. The surface groups were investigated by XPS, TPR-H2, and FTIR spectroscopy. DRIFT spectroscopy was performed to investigate the interaction between ethanol and the surface of the synthesized materials. Studies of the sensor properties have shown that in all cases the most sensitive is the SnO2/SiO2-Au nanocomposite. This material retains high sensitivity even in a humid atmosphere. The obtained results are discussed in terms of the synergistic effect of two modifiers (Au and SiO2) in the formation of sensor properties of SnO2/SiO2–Au nanocomposites. Full article
(This article belongs to the Special Issue Nanostructured Sensors)
Show Figures

Figure 1

12 pages, 9014 KiB  
Article
Generating Silicon Nanofiber Clusters from Grinding Sludge by Millisecond Pulsed Laser Irradiation
by Ko Momoki, Kunimitsu Takahashi, Kyosuke Kobinata, Yoshikazu Kobayashi, Akihito Kawai and Jiwang Yan
Nanomaterials 2020, 10(4), 812; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040812 - 23 Apr 2020
Cited by 3 | Viewed by 2465
Abstract
Silicon nanofiber clusters were successfully generated by the irradiation of millisecond pulsed laser light on silicon sludge disposed from wafer back-grinding processes. It was found that the size, intensity, and growing speed of the laser-induced plume varied with the gas pressure, while the [...] Read more.
Silicon nanofiber clusters were successfully generated by the irradiation of millisecond pulsed laser light on silicon sludge disposed from wafer back-grinding processes. It was found that the size, intensity, and growing speed of the laser-induced plume varied with the gas pressure, while the size and morphology of the nanofibers were dependent on the laser pulse duration. The generated nanofibers were mainly amorphous with crystalline nanoparticles on their tips. The crystallinity and oxidation degree of the nanofibers depended on the preheating conditions of the silicon sludge. This study demonstrated the possibility of changing silicon waste into functional nanomaterials, which are possibly useful for fabricating high-performance lithium-ion battery electrodes. Full article
(This article belongs to the Special Issue Advances in Nanowire)
Show Figures

Graphical abstract

21 pages, 5432 KiB  
Article
Multi-Frequency Resonance Behaviour of a Si Fractal NEMS Resonator
by Vassil Tzanov, Jordi Llobet, Francesc Torres, Francesc Perez-Murano and Nuria Barniol
Nanomaterials 2020, 10(4), 811; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040811 - 23 Apr 2020
Cited by 4 | Viewed by 3243
Abstract
Novel Si-based nanosize mechanical resonator has been top-down fabricated. The shape of the resonating body has been numerically derived and consists of seven star-polygons that form a fractal structure. The actual resonator is defined by focused ion-beam implantation on a SOI wafer where [...] Read more.
Novel Si-based nanosize mechanical resonator has been top-down fabricated. The shape of the resonating body has been numerically derived and consists of seven star-polygons that form a fractal structure. The actual resonator is defined by focused ion-beam implantation on a SOI wafer where its 18 vertices are clamped to nanopillars. The structure is suspended over a 10 μm trench and has width of 12 μm. Its thickness of 0.040 μm is defined by the fabrication process and prescribes Young’s modulus of 76 GPa which is significantly lower than the value of the bulk material. The resonator is excited by the bottom Si-layer and the interferometric characterisation confirms broadband frequency response with quality factors of over 800 for several peaks between 2 MHz and 16 MHz. COMSOL FEM software has been used to vary material properties and residual stress in order to fit the eigenfrequencies of the model with the resonance peaks detected experimentally. Further use of the model shows how the symmetry of the device affects the frequency spectrum. Also, by using the FEM model, the possibility for an electrical read out of the device was tested. The experimental measurements and simulations proved that the device can resonate at many different excitation frequencies allowing multiple operational bands. The size, and the power needed for actuation are comparable with the ones of single beam resonator while the fractal structure allows much larger area for functionalisation. Full article
(This article belongs to the Special Issue Nanomaterials for the Advanced Manufacturing of Electronic Devices)
Show Figures

Figure 1

23 pages, 7610 KiB  
Article
Biological Safety and Biodistribution of Chitosan Nanoparticles
by Dmitry Sonin, Evgeniia Pochkaeva, Sergei Zhuravskii, Viktor Postnov, Dmitry Korolev, Lyubov Vasina, Daria Kostina, Daria Mukhametdinova, Irina Zelinskaya, Yury Skorik, Elena Naumysheva, Anna Malashicheva, Pavel Somov, Maria Istomina, Natalia Rubanova, Ilia Aleksandrov, Marina Vasyutina and Michael Galagudza
Nanomaterials 2020, 10(4), 810; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040810 - 23 Apr 2020
Cited by 33 | Viewed by 4311
Abstract
The effect of unmodified chitosan nanoparticles with a size of ~100 nm and a weakly positive charge on blood coagulation, metabolic activity of cultured cardiomyocytes, general toxicity, biodistribution, and reactive changes in rat organs in response to their single intravenous administration at doses [...] Read more.
The effect of unmodified chitosan nanoparticles with a size of ~100 nm and a weakly positive charge on blood coagulation, metabolic activity of cultured cardiomyocytes, general toxicity, biodistribution, and reactive changes in rat organs in response to their single intravenous administration at doses of 1, 2, and 4 mg/kg was studied. Chitosan nanoparticles (CNPs) have a small cytotoxic effect and have a weak antiplatelet and anticoagulant effect. Intravenous administration of CNPs does not cause significant hemodynamic changes, and 30 min after the CNPs administration, they mainly accumulate in the liver and lungs, without causing hemolysis and leukocytosis. The toxicity of chitosan nanoparticles was manifested in a dose-dependent short-term delay in weight gain with subsequent recovery, while in the 2-week observation period no signs of pain and distress were observed in rats. Granulomas found in the lungs and liver indicate slow biodegradation of chitosan nanoparticles. In general, the obtained results indicate a good tolerance of intravenous administration of an unmodified chitosan suspension in the studied dose range. Full article
Show Figures

Figure 1

14 pages, 4861 KiB  
Article
Investigation on Mn3O4 Coated Ru Nanoparticles for Partial Hydrogenation of Benzene towards Cyclohexene Production Using ZnSO4, MnSO4 and FeSO4 as Reaction Additives
by Xingai Liu, Zhihao Chen, Haijie Sun, Lingxia Chen, Zhikun Peng and Zhongyi Liu
Nanomaterials 2020, 10(4), 809; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040809 - 23 Apr 2020
Cited by 3 | Viewed by 2949
Abstract
Mn3O4 coated Ru nanoparticles (Ru@Mn3O4) were synthesized via a precipitation-reduction-gel method. The prepared catalysts were evaluated for partial hydrogenation of benzene towards cyclohexene generation by applying ZnSO4, MnSO4 and FeSO4 as reaction [...] Read more.
Mn3O4 coated Ru nanoparticles (Ru@Mn3O4) were synthesized via a precipitation-reduction-gel method. The prepared catalysts were evaluated for partial hydrogenation of benzene towards cyclohexene generation by applying ZnSO4, MnSO4 and FeSO4 as reaction additives. The fresh and spent catalysts were thoroughly characterized by XRD, X ray fluorescence (XRF), XPS, TEM and N2-physicalsorption in order to understand the promotion effect of Mn3O4 as the modifier as well as ZnSO4, MnSO4 and FeSO4 as reaction additives. It was found that 72.0% of benzene conversion and 79.2% of cyclohexene selectivity was achieved after 25 min of reaction time over Ru@Mn3O4 with a molar ratio of Mn/Ru being 0.46. This can be rationalized in terms of the formed (Zn(OH)2)3(ZnSO4)(H2O)3 on the Ru surface from the reaction between Mn3O4 and the added ZnSO4. Furthermore, Fe2+ and Fe3+ compounds could be generated and adsorbed on the surface of Ru@Mn3O4 when FeSO4 is applied as a reaction additive. The most electrons were transferred from Ru to Fe, resulting in that lowest benzene conversion of 1.5% and the highest cyclohexene selectivity of 92.2% after 25 min of catalytic experiment. On the other hand, by utilizing MnSO4 as an additive, no electrons transfer was observed between Ru and Mn, which lead to the complete hydrogenation of benzene towards cyclohexane within 5 min. In comparison, moderate amount of electrons were transferred from Ru to Zn2+ in (Zn(OH)2)3(ZnSO4)(H2O)3 when ZnSO4 is used as a reaction additive, and the highest cyclohexene yield of 57.0% was obtained within 25 min of reaction time. Full article
(This article belongs to the Special Issue Catalysis by Metal-Oxide Nanostructures)
Show Figures

Figure 1

18 pages, 4875 KiB  
Article
3-Dimensional Porous Carbon with High Nitrogen Content Obtained from Longan Shell and Its Excellent Performance for Aqueous and All-Solid-State Supercapacitors
by Yuhao Liu, Xiaoxiao Qu, Guangxu Huang, Baolin Xing, Fengmei Zhang, Binbin Li, Chuanxiang Zhang and Yijun Cao
Nanomaterials 2020, 10(4), 808; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040808 - 23 Apr 2020
Cited by 24 | Viewed by 3319
Abstract
Three-dimensional porous carbon is considered as an ideal electrode material for supercapacitors (SCs) applications owing to its good conductivity, developed pore structure, and excellent connectivity. Herein, using longan shell as precursor, 3-dimensional porous carbon with abundant and interconnected pores and moderate heteroatoms were [...] Read more.
Three-dimensional porous carbon is considered as an ideal electrode material for supercapacitors (SCs) applications owing to its good conductivity, developed pore structure, and excellent connectivity. Herein, using longan shell as precursor, 3-dimensional porous carbon with abundant and interconnected pores and moderate heteroatoms were obtained via simple carbonization and potassium hydroxide (KOH) activation treatment. The electrochemical performances of obtained 3-dimensional porous carbon were investigated as electrode materials in symmetric SCs with aqueous and solid electrolytes. The optimized material that is named after longan shell 3-dimensional porous carbon 800 (LSPC800) possesses high porosity (1.644 cm3 g−1) and N content (1.14 at %). In the three-electrode measurement, the LSPC800 displays an excellent capacitance value of 359 F g−1. Besides, the LSPC800 also achieves splendid specific capacitance (254 F g−1) in the two electrode system, while the fabricated SC employing 1 M Li2SO4 as electrolyte acquires ultrahigh power density (15930.38 W kg−1). Most importantly, LSPC800 electrodes are further applied into the SC adopting the KOH/polyvinyl alcohol (PVA) gel electrolyte, which reaches up to an outstanding capacitance of 313 F g−1 at 0.5 A g−1. In addition, for the all-solid-state SC, its rate capability at 50 A g−1 is 72.73% and retention at the 10,000th run is 93.64%. Evidently, this work is of great significance to the simple fabrication of 3-dimensional porous carbon and further opens up a way of improving the value-added utilization of biomass materials, as well as proving that the biomass porous carbons have immense potential for high-performance SCs application. Full article
(This article belongs to the Special Issue Design and Synthesis of Nanomaterials for Energy Storage)
Show Figures

Graphical abstract

15 pages, 2942 KiB  
Article
The Effect of Different Oxygen Surface Functionalization of Carbon Nanotubes on the Electrical Resistivity and Strain Sensing Function of Cement Pastes
by B. Del Moral, I. Martín Gullón, R. Navarro, O. Galao, F.J. Baeza, E. Zornoza, B. Calderón, I. Rodríguez, N. Arnaiz, M.D. Romero Sánchez and P. Garcés
Nanomaterials 2020, 10(4), 807; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040807 - 23 Apr 2020
Cited by 12 | Viewed by 2800
Abstract
Different studies in the literature indicate the effectiveness of CNTs as reinforcing materials in cement–matrix composites due to their high mechanical strength. Nevertheless, their incorporation into cement presents some difficulties due to their tendency to agglomerate, yielding a non-homogeneous dispersion in the paste [...] Read more.
Different studies in the literature indicate the effectiveness of CNTs as reinforcing materials in cement–matrix composites due to their high mechanical strength. Nevertheless, their incorporation into cement presents some difficulties due to their tendency to agglomerate, yielding a non-homogeneous dispersion in the paste mix that results in a poor cement–CNTs interaction. This makes the surface modification of the CNTs by introducing functional groups on the surface necessary. In this study, three different treatments for incorporating polar oxygen functional groups onto the surface of carbon nanotubes have been carried out, with the objective of evaluating the influence of the type and oxidation degree on the mechanical and electrical properties and in strain-sensing function of cement pastes containing CNTs. One treatment is in liquid phase (surface oxidation with HNO3/H2SO4), the second is in gas phase (O3 treatment at 25 and 160 °C), and a third is a combination of gas-phase O3 treatment plus NaOH liquid phase. The electrical conductivity of cement pastes increased with O3- and O3-NaOH-treated CNTs with respect to non-treated ones. Furthermore, the oxygen functionalization treatments clearly improve the strain sensing performance of the CNT-cement pastes, particularly in terms of the accuracy of the linear correlation between the resistance and the stress, as well as the increase in the gage factor from 28 to 65. Additionally, the incorporation of either non-functionalized or functionalized CNTs did not produce any significant modification of the mechanical properties of CNTs. Therefore, the functionalization of CNTs favours the de-agglomeration of CNTs in the cement matrix and consequently, the electrical conductivity, without affecting the mechanical behaviour. Full article
Show Figures

Figure 1

10 pages, 2077 KiB  
Article
Facile Synthesis of Solution-Processed Silica and Polyvinyl Phenol Hybrid Dielectric for Flexible Organic Transistors
by Xiong Chen, Yu Zhang, Xiangfeng Guan and Hao Zhang
Nanomaterials 2020, 10(4), 806; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040806 - 23 Apr 2020
Cited by 2 | Viewed by 2148
Abstract
A high-quality dielectric layer is essential for organic thin-film transistors (OTFTs) operated at a low-power consumption level. In this study, a facile improved technique for the synthesis of solution-processed silica is proposed. By optimizing the synthesis and processing technique fewer pores were found [...] Read more.
A high-quality dielectric layer is essential for organic thin-film transistors (OTFTs) operated at a low-power consumption level. In this study, a facile improved technique for the synthesis of solution-processed silica is proposed. By optimizing the synthesis and processing technique fewer pores were found on the surface of the film, particularly no large holes were observable after improving the annealing process, and the improved solution–gelation (sol–gel) SiOx dielectric achieved a higher breakdown strength (1.6 MV/cm) and lower leakage current density (10−8 A/cm2 at 1.5 MV/cm). Consequently, a pentacene based OTFT with a high field effect mobility (~1.8 cm2/Vs), a low threshold voltage (−1.7 V), a steeper subthreshold slope (~0.4 V/dec) and a relatively high on/off ratio (~105) was fabricated by applying a hybrid gate insulator which consisted of improved sol–gel SiOx and polyvinyl phenol (PVP). This could be ascribed to both the high k of SiOx and the smoother, hydrophobic dielectric surface with low trap density, which was proved by atomic force microscopy (AFM) and a water contact angle test, respectively. Additionally, we systematically studied and evaluated the stability of devices in the compressed state. The devices based on dielectric fabricated by conventional sol–gel processes were more susceptible to the curvature. While the improved device presented an excellent mechanic strength, it could still function at the higher bending compression without a significant degradation in performance. Thus, this solution-process technology provides an effective approach to fabricate high-quality dielectric and offers great potential for low-cost, fast and portable organic electronic applications. Full article
(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
Show Figures

Figure 1

14 pages, 5941 KiB  
Article
Noble Metal-Free TiO2-Coated Carbon Nitride Layers for Enhanced Visible Light-Driven Photocatalysis
by Bo Zhang, Xiangfeng Peng and Zhao Wang
Nanomaterials 2020, 10(4), 805; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040805 - 23 Apr 2020
Cited by 12 | Viewed by 2902
Abstract
Composites of g-C3N4/TiO2 were one-step prepared using electron impact with dielectric barrier discharge (DBD) plasma as the electron source. Due to the low operation temperature, TiO2 by the plasma method shows higher specific surface area and smaller [...] Read more.
Composites of g-C3N4/TiO2 were one-step prepared using electron impact with dielectric barrier discharge (DBD) plasma as the electron source. Due to the low operation temperature, TiO2 by the plasma method shows higher specific surface area and smaller particle size than that prepared via conventional calcination. Most interestingly, electron impact produces more oxygen vacancy on TiO2, which facilitates the recombination and formation of heterostructure of g-C3N4/TiO2. The composites have higher light absorption capacity and lower charge recombination efficiency. g-C3N4/TiO2 by plasma can produce hydrogen at a rate of 219.9 μmol·g−1·h−1 and completely degrade Rhodamine B (20mg·L−1) in two hours. Its hydrogen production rates were 3 and 1.5 times higher than that by calcination and pure g-C3N4, respectively. Electron impact, ozone and oxygen radical also play key roles in plasma preparation. Plasma has unique advantages in metal oxides defect engineering and the preparation of heterostructured composites with prospective applications as photocatalysts for pollutant degradation and water splitting. Full article
Show Figures

Graphical abstract

14 pages, 3489 KiB  
Article
A Nano-Rattle SnO2@carbon Composite Anode Material for High-Energy Li-ion Batteries by Melt Diffusion Impregnation
by Sivarajakumar Maharajan, Nam Hee Kwon, Pierre Brodard and Katharina M. Fromm
Nanomaterials 2020, 10(4), 804; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040804 - 22 Apr 2020
Cited by 8 | Viewed by 2788
Abstract
The huge volume expansion in Sn-based alloy anode materials (up to 360%) leads to a dramatic mechanical stress and breaking of particles, resulting in the loss of conductivity and thereby capacity fading. To overcome this issue, SnO2@C nano-rattle composites based on [...] Read more.
The huge volume expansion in Sn-based alloy anode materials (up to 360%) leads to a dramatic mechanical stress and breaking of particles, resulting in the loss of conductivity and thereby capacity fading. To overcome this issue, SnO2@C nano-rattle composites based on <10 nm SnO2 nanoparticles in and on porous amorphous carbon spheres were synthesized using a silica template and tin melting diffusion method. Such SnO2@C nano-rattle composite electrodes provided two electrochemical processes: a partially reversible process of the SnO2 reduction to metallic Sn at 0.8 V vs. Li+/Li and a reversible process of alloying/dealloying of LixSny at 0.5 V vs. Li+/Li. Good performance could be achieved by controlling the particle sizes of SnO2 and carbon, the pore size of carbon, and the distribution of SnO2 nanoparticles on the carbon shells. Finally, the areal capacity of SnO2@C prepared by the melt diffusion process was increased due to the higher loading of SnO2 nanoparticles into the hollow carbon spheres, as compared with Sn impregnation by a reducing agent. Full article
(This article belongs to the Section Energy and Catalysis)
Show Figures

Graphical abstract

21 pages, 5049 KiB  
Review
Conductive Atomic Force Microscopy of Semiconducting Transition Metal Dichalcogenides and Heterostructures
by Filippo Giannazzo, Emanuela Schilirò, Giuseppe Greco and Fabrizio Roccaforte
Nanomaterials 2020, 10(4), 803; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040803 - 22 Apr 2020
Cited by 33 | Viewed by 7537
Abstract
Semiconducting transition metal dichalcogenides (TMDs) are promising materials for future electronic and optoelectronic applications. However, their electronic properties are strongly affected by peculiar nanoscale defects/inhomogeneities (point or complex defects, thickness fluctuations, grain boundaries, etc.), which are intrinsic of these materials or introduced during [...] Read more.
Semiconducting transition metal dichalcogenides (TMDs) are promising materials for future electronic and optoelectronic applications. However, their electronic properties are strongly affected by peculiar nanoscale defects/inhomogeneities (point or complex defects, thickness fluctuations, grain boundaries, etc.), which are intrinsic of these materials or introduced during device fabrication processes. This paper reviews recent applications of conductive atomic force microscopy (C-AFM) to the investigation of nanoscale transport properties in TMDs, discussing the implications of the local phenomena in the overall behavior of TMD-based devices. Nanoscale resolution current spectroscopy and mapping by C-AFM provided information on the Schottky barrier uniformity and shed light on the mechanisms responsible for the Fermi level pinning commonly observed at metal/TMD interfaces. Methods for nanoscale tailoring of the Schottky barrier in MoS2 for the realization of ambipolar transistors are also illustrated. Experiments on local conductivity mapping in monolayer MoS2 grown by chemical vapor deposition (CVD) on SiO2 substrates are discussed, providing a direct evidence of the resistance associated to the grain boundaries (GBs) between MoS2 domains. Finally, C-AFM provided an insight into the current transport phenomena in TMD-based heterostructures, including lateral heterojunctions observed within MoxW1–xSe2 alloys, and vertical heterostructures made by van der Waals stacking of different TMDs (e.g., MoS2/WSe2) or by CVD growth of TMDs on bulk semiconductors. Full article
Show Figures

Figure 1

12 pages, 1077 KiB  
Communication
Can Nanotechnology and Materials Science Help the Fight against SARS-CoV-2?
by Maria Chiara Sportelli, Margherita Izzi, Ekaterina A. Kukushkina, Syed Imdadul Hossain, Rosaria Anna Picca, Nicoletta Ditaranto and Nicola Cioffi
Nanomaterials 2020, 10(4), 802; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040802 - 21 Apr 2020
Cited by 199 | Viewed by 21627
Abstract
Since 2004, we have been developing nanomaterials with antimicrobial properties, the so-called nanoantimicrobials. When the coronavirus disease 2019 (COVID-19) emerged, we started investigating new and challenging routes to nanoantivirals. The two fields have some important points of contact. We would like to share [...] Read more.
Since 2004, we have been developing nanomaterials with antimicrobial properties, the so-called nanoantimicrobials. When the coronavirus disease 2019 (COVID-19) emerged, we started investigating new and challenging routes to nanoantivirals. The two fields have some important points of contact. We would like to share with the readership our vision of the role a (nano)materials scientist can play in the fight against the COVID-19 pandemic. As researchers specifically working on surfaces and nanomaterials, in this letter we underline the importance of nanomaterial-based technological solutions in several aspects of the fight against the virus. While great resources are understandably being dedicated to treatment and diagnosis, more efforts could be dedicated to limit the virus spread. Increasing the efficacy of personal protection equipment, developing synergistic antiviral coatings, are only two of the cases discussed. This is not the first nor the last pandemic: our nanomaterials community may offer several technological solutions to challenge the ongoing and future global health emergencies. Readers’ feedback and suggestions are warmly encouraged. Full article
(This article belongs to the Section Biology and Medicines)
Show Figures

Figure 1

12 pages, 2907 KiB  
Article
Peculiarities of the Crystal Structure Evolution of BiFeO3–BaTiO3 Ceramics across Structural Phase Transitions
by Dmitry V. Karpinsky, Maxim V. Silibin, Sergei V. Trukhanov, Alex V. Trukhanov, Alexander L. Zhaludkevich, Siarhei I. Latushka, Dmitry V. Zhaludkevich, Vladimir A. Khomchenko, Denis O. Alikin, Alexander S. Abramov, Tomasz Maniecki, Waldemar Maniukiewicz, Martin Wolff, Volker Heitmann and Andrei L. Kholkin
Nanomaterials 2020, 10(4), 801; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040801 - 21 Apr 2020
Cited by 62 | Viewed by 4000
Abstract
Evolution of the crystal structure of ceramics BiFeO3–BaTiO3 across the morphotropic phase boundary was analyzed using the results of macroscopic measuring techniques such as X-ray diffraction, differential scanning calorimetry, and differential thermal analysis, as well as the data obtained by [...] Read more.
Evolution of the crystal structure of ceramics BiFeO3–BaTiO3 across the morphotropic phase boundary was analyzed using the results of macroscopic measuring techniques such as X-ray diffraction, differential scanning calorimetry, and differential thermal analysis, as well as the data obtained by local scale methods of scanning probe microscopy. The obtained results allowed to specify the concentration and temperature regions of the single phase and phase coexistent regions as well as to clarify a modification of the structural parameters across the rhombohedral–cubic phase boundary. The structural data show unexpected strengthening of structural distortion specific for the rhombohedral phase, which occurs upon dopant concentration and temperature-driven phase transitions to the cubic phase. The obtained results point to the non-monotonous character of the phase evolution, which is specific for metastable phases. The compounds with metastable structural state are characterized by enhanced sensitivity to external stimuli, which significantly expands the perspectives of their particular use. Full article
(This article belongs to the Special Issue Oxide Magnetics)
Show Figures

Graphical abstract

1 pages, 177 KiB  
Correction
Correction: Haj-Khlifa, S., et al. Polyol Process Coupled to Cold Plasma as a New and Efficient Nanohydride Processing Method: Nano-Ni2H as a Case Study. Nanomaterials 2020, 10, 136
by Sonia Haj-Khlifa, Sophie Nowak, Patricia Beaunier, Patricia De Rango, Michaël Redolfi and Souad Ammar-Merah
Nanomaterials 2020, 10(4), 800; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040800 - 21 Apr 2020
Viewed by 1827
Abstract
The authors wish to make the following corrections to this paper [...] Full article
14 pages, 3893 KiB  
Article
Spherical Polyelectrolyte Brushes as Templates to Prepare Hollow Silica Spheres Encapsulating Metal Nanoparticles
by Qingsong Yang, Li Li, Fang Zhao, Yunwei Wang, Zhishuang Ye, Chen Hua, Zhiyong Liu, Klemen Bohinc and Xuhong Guo
Nanomaterials 2020, 10(4), 799; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040799 - 21 Apr 2020
Cited by 20 | Viewed by 3649
Abstract
Integrating hollow silica spheres with metal nanoparticles to fabricate multifunctional hybrid materials has attracted increasing attention in catalysis, detection, and drug delivery. Here, we report a simple and general method to prepare hollow silica spheres encapsulating silver nanoparticles (Ag@SiO2) based on [...] Read more.
Integrating hollow silica spheres with metal nanoparticles to fabricate multifunctional hybrid materials has attracted increasing attention in catalysis, detection, and drug delivery. Here, we report a simple and general method to prepare hollow silica spheres encapsulating silver nanoparticles (Ag@SiO2) based on spherical polyelectrolyte brushes (SPB), which consist of a polystyrene core and densely grafted poly (acrylic acid) (PAA) chains. SPB were firstly used as nanoreactors to generate silver nanoparticles in situ and then used as sacrificial templates to prepare hybrid hollow silica spheres. The resulted Ag@SiO2 composites exhibit high catalytic activity and good reusability for the reduction of 4-nitrophenol to 4-aminophenol by NaBH4. More importantly, this developed approach can be extended to the encapsulation of other metal nanoparticles such as gold nanoparticles into the hollow silica spheres. This work demonstrates that SPB are promising candidates for the preparation of hollow spheres with encapsulated metal nanoparticles and the resulted hybrid spheres show great potential applications in catalysis. Full article
(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
Show Figures

Graphical abstract

13 pages, 3579 KiB  
Article
Unraveling Origins of EPR Spectrum in Graphene Oxide Quantum Dots
by Krzysztof Tadyszak, Andrzej Musiał, Adam Ostrowski and Jacek K. Wychowaniec
Nanomaterials 2020, 10(4), 798; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040798 - 21 Apr 2020
Cited by 12 | Viewed by 4068
Abstract
Carbon nanostructures are utilized in a plethora of applications ranging from biomedicine to electronics. Particularly interesting are carbon nanostructured quantum dots that can be simultaneously used for bimodal therapies with both targeting and imaging capabilities. Here, magnetic and optical properties of graphene oxide [...] Read more.
Carbon nanostructures are utilized in a plethora of applications ranging from biomedicine to electronics. Particularly interesting are carbon nanostructured quantum dots that can be simultaneously used for bimodal therapies with both targeting and imaging capabilities. Here, magnetic and optical properties of graphene oxide quantum dots (GOQDs) prepared by the top-down technique from graphene oxide and obtained using the Hummers’ method were studied. Graphene oxide was ultra-sonicated, boiled in HNO3, ultra-centrifuged, and finally filtrated, reaching a mean flake size of ~30 nm with quantum dot properties. Flake size distributions were obtained from scanning electron microscopy (SEM) images after consecutive preparation steps. Energy-dispersive X-ray (EDX) confirmed that GOQDs were still oxidized after the fabrication procedure. Magnetic and photoluminescence measurements performed on the obtained GOQDs revealed their paramagnetic behavior and broad range optical photoluminescence around 500 nm, with magnetic moments of 2.41 µB. Finally, electron paramagnetic resonance (EPR) was used to separate the unforeseen contributions and typically not taken into account metal contaminations, and radicals from carbon defects. This study contributes to a better understanding of magnetic properties of carbon nanostructures, which could in the future be used for the design of multimodal imaging agents. Full article
(This article belongs to the Special Issue Nanocarbon Based Materials)
Show Figures

Graphical abstract

13 pages, 5058 KiB  
Article
Fabrication and Characterization of a Novel Composite Magnetic Photocatalyst β-Bi2O3/BiVO4/MnxZn1−xFe2O4 for Rhodamine B Degradation under Visible Light
by Yong Cheng, Yahan Yang, Zao Jiang, Longjun Xu and Chenglun Liu
Nanomaterials 2020, 10(4), 797; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040797 - 21 Apr 2020
Cited by 10 | Viewed by 2276
Abstract
β-Bi2O3/BiVO4/MnxZn1−xFe2O4 (BV/MZF) composite magnetic photocatalyst was first synthesized using the hydrothermal and calcination method. BV/MZF was a mesoporous material with most probable pore size and specific surface area of 18 [...] Read more.
β-Bi2O3/BiVO4/MnxZn1−xFe2O4 (BV/MZF) composite magnetic photocatalyst was first synthesized using the hydrothermal and calcination method. BV/MZF was a mesoporous material with most probable pore size and specific surface area of 18 nm and 17.84 m2/g, respectively. Due to its high saturation magnetization (2.67 emu/g), the BV/MZF composite can be easily separated and recovered from solution under an external magnetic field. The results of photo-decomposition experiments show that the decomposition rate of Rhodamine B (RhB) by BV/MZF can reach 92.6% in 3 h under visible light. After three cycles, BV/MZF can still maintain structural stability and excellent pollutant degradation effect. In addition, analysis of the photocatalytic mechanism of BV/MZF for RhB shows that the p-n heterojunction formed in BV/MZF plays a vital role in its photocatalytic performance. This work has potential application in the future for solving environmental pollution. Full article
Show Figures

Graphical abstract

14 pages, 2327 KiB  
Article
Temperature Effect on Capillary Flow Dynamics in 1D Array of Open Nanotextured Microchannels Produced by Femtosecond Laser on Silicon
by Ranran Fang, Hongbo Zhu, Zekai Li, Xiaohui Zhu, Xianhang Zhang, Zhiyu Huang, Ke Li, Wensheng Yan, Yi Huang, Valeriy S. Maisotsenko and Anatoliy Y. Vorobyev
Nanomaterials 2020, 10(4), 796; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040796 - 21 Apr 2020
Cited by 11 | Viewed by 2473
Abstract
Capillary flow of water in an array of open nanotextured microgrooves fabricated by femtosecond laser processing of silicon is studied as a function of temperature using high-speed video recording. In a temperature range of 23–80 °C, the produced wicking material provides extremely fast [...] Read more.
Capillary flow of water in an array of open nanotextured microgrooves fabricated by femtosecond laser processing of silicon is studied as a function of temperature using high-speed video recording. In a temperature range of 23–80 °C, the produced wicking material provides extremely fast liquid flow with a maximum velocity of 37 cm/s in the initial spreading stage prior to visco-inertial regime. The capillary performance of the material enhances with increasing temperature in the inertial, visco-inertial, and partially in Washburn flow regimes. The classic universal Washburn’s regime is observed at all studied temperatures, giving the evidence of its universality at high temperatures as well. The obtained results are of great significance for creating capillary materials for applications in cooling of electronics, energy harvesting, enhancing the critical heat flux of industrial boilers, and Maisotsenko cycle technologies. Full article
(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
Show Figures

Figure 1

15 pages, 3750 KiB  
Article
Enhanced Solar Light Photocatalytic Activity of Ag Doped TiO2–Ag3PO4 Composites
by Abdessalem Hamrouni, Hanen Azzouzi, Ali Rayes, Leonardo Palmisano, Riccardo Ceccato and Francesco Parrino
Nanomaterials 2020, 10(4), 795; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040795 - 21 Apr 2020
Cited by 40 | Viewed by 3412
Abstract
Composites comprised of Ag3PO4 and bare TiO2 (TiO2@Ag3PO4) or silver doped TiO2 (Ag@TiO2–Ag3PO4) have been synthesized by coupling sol–gel and precipitation methods. For the sake of [...] Read more.
Composites comprised of Ag3PO4 and bare TiO2 (TiO2@Ag3PO4) or silver doped TiO2 (Ag@TiO2–Ag3PO4) have been synthesized by coupling sol–gel and precipitation methods. For the sake of comparison, also the bare components have been similarly prepared. All the samples have been characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), photoelectrochemical measurements, and specific surface area (SSA) analysis. The optoelectronic and structural features of the samples have been related to their photocatalytic activity for the degradation of 4–nitrophenol under solar and UV light irradiation. Coupling Ag3PO4 with silver doped TiO2 mitigates photocorrosion of the Ag3PO4 counterpart, and remarkably improves the photocatalytic activity under solar light irradiation with respect to the components, to the TiO2–Ag3PO4 sample, and to the benchmark TiO2 Evonik P25. These features open the route to future applications of this material in the field of environmental remediation. Full article
(This article belongs to the Special Issue Nanocontainers, Nano-Adsorbents, and Their Polymer Composites)
Show Figures

Figure 1

9 pages, 10880 KiB  
Article
Induced Topological Superconductivity in a BiSbTeSe2-Based Josephson Junction
by Bob de Ronde, Chuan Li, Yingkai Huang and Alexander Brinkman
Nanomaterials 2020, 10(4), 794; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040794 - 21 Apr 2020
Cited by 11 | Viewed by 3955
Abstract
A 4 π -periodic supercurrent through a Josephson junction can be a consequence of the presence of Majorana bound states. A systematic study of the radio frequency response for several temperatures and frequencies yields a concrete protocol for examining the 4 π -periodic [...] Read more.
A 4 π -periodic supercurrent through a Josephson junction can be a consequence of the presence of Majorana bound states. A systematic study of the radio frequency response for several temperatures and frequencies yields a concrete protocol for examining the 4 π -periodic contribution to the supercurrent. This work also reports the observation of a 4 π -periodic contribution to the supercurrent in BiSbTeSe 2 -based Josephson junctions. As a response to irradiation by radio frequency waves, the junctions showed an absence of the first Shapiro step. At high irradiation power, a qualitative correspondence to a model including a 4 π -periodic component to the supercurrent is found. Full article
(This article belongs to the Special Issue Superconductivity in Nanoscaled Systems)
Show Figures

Figure 1

11 pages, 3331 KiB  
Article
Study of Silicon Nitride Inner Spacer Formation in Process of Gate-all-around Nano-Transistors
by Junjie Li, Yongliang Li, Na Zhou, Wenjuan Xiong, Guilei Wang, Qingzhu Zhang, Anyan Du, Jianfeng Gao, Zhenzhen Kong, Hongxiao Lin, Jinjuan Xiang, Chen Li, Xiaogen Yin, Xiaolei Wang, Hong Yang, Xueli Ma, Jianghao Han, Jing Zhang, Tairan Hu, Zhe Cao, Tao Yang, Junfeng Li, Huaxiang Yin, Huilong Zhu, Jun Luo, Wenwu Wang and Henry H. Radamsonadd Show full author list remove Hide full author list
Nanomaterials 2020, 10(4), 793; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040793 - 20 Apr 2020
Cited by 23 | Viewed by 10796
Abstract
Stacked SiGe/Si structures are widely used as the units for gate-all-around nanowire transistors (GAA NWTs) which are a promising candidate beyond fin field effective transistors (FinFETs) technologies in near future. These structures deal with a several challenges brought by the shrinking of device [...] Read more.
Stacked SiGe/Si structures are widely used as the units for gate-all-around nanowire transistors (GAA NWTs) which are a promising candidate beyond fin field effective transistors (FinFETs) technologies in near future. These structures deal with a several challenges brought by the shrinking of device dimensions. The preparation of inner spacers is one of the most critical processes for GAA nano-scale transistors. This study focuses on two key processes: inner spacer film conformal deposition and accurate etching. The results show that low pressure chemical vapor deposition (LPCVD) silicon nitride has a good film filling effect; a precise and controllable silicon nitride inner spacer structure is prepared by using an inductively coupled plasma (ICP) tool and a new gas mixtures of CH2F2/CH4/O2/Ar. Silicon nitride inner spacer etch has a high etch selectivity ratio, exceeding 100:1 to Si and more than 30:1 to SiO2. High anisotropy with an excellent vertical/lateral etch ratio exceeding 80:1 is successfully demonstrated. It also provides a solution to the key process challenges of nano-transistors beyond 5 nm node. Full article
(This article belongs to the Special Issue Plasma Based Nanomaterials and Their Applications)
Show Figures

Figure 1

15 pages, 4903 KiB  
Article
Grafting Thin Layered Graphene Oxide onto the Surface of Nonwoven/PVDF-PAA Composite Membrane for Efficient Dye and Macromolecule Separations
by Febri Baskoro, Selvaraj Rajesh Kumar and Shingjiang Jessie Lue
Nanomaterials 2020, 10(4), 792; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040792 - 20 Apr 2020
Cited by 14 | Viewed by 3138
Abstract
This study investigates the permeance and rejection efficiencies of different dyes (Rhodamine B and methyl orange), folic acid and a protein (bovine serum albumin) using graphene oxide composite membrane. The ultrathin separation layer of graphene oxide (thickness of 380 nm) was successfully deposited [...] Read more.
This study investigates the permeance and rejection efficiencies of different dyes (Rhodamine B and methyl orange), folic acid and a protein (bovine serum albumin) using graphene oxide composite membrane. The ultrathin separation layer of graphene oxide (thickness of 380 nm) was successfully deposited onto porous polyvinylidene fluoride-polyacrylic acid intermediate layer on nonwoven support layer using vacuum filtration. The graphene oxide addition in the composite membrane caused an increased hydrophilicity and negative surface charge than those of the membrane without graphene oxide. In the filtration process using a graphene oxide composite membrane, the permeance values of pure water, dyes, folic acid and bovine serum albumin molecules were more severely decreased (by two orders of magnitude) than those of the nonwoven/polyvinylidene fluoride-polyacrylic acid composite membrane. However, the rejection efficiency of the graphene oxide composite was significantly improved in cationic Rhodamine B (from 9% to 80.3%) and anionic methyl orange (from 28.3% to 86.6%) feed solutions. The folic acid and bovine serum albumin were nearly completely rejected from solutions using either nonwoven/polyvinylidene fluoride-polyacrylic acid or nonwoven/polyvinylidene fluoride-polyacrylic acid/graphene oxide composite membrane, but the latter possessed anti-fouling property against the protein molecules. The separation mechanism in nonwoven/polyvinylidene fluoride-polyacrylic acid membrane includes the Donnan exclusion effect (for smaller-than-pore-size solutes) and sieving mechanism (for larger solutes). The sieving mechanism governs the filtration behavior in the nonwoven/polyvinylidene fluoride-polyacrylic acid/graphene oxide composite membrane. Full article
(This article belongs to the Section Nanocomposite Materials)
Show Figures

Graphical abstract

20 pages, 5873 KiB  
Article
Cerium Dioxide Nanoparticles as Smart Carriers for Self-Healing Coatings
by Sehrish Habib, Eman Fayyad, Muddasir Nawaz, Adnan Khan, Rana A. Shakoor, Ramazan Kahraman and Aboubakr Abdullah
Nanomaterials 2020, 10(4), 791; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040791 - 20 Apr 2020
Cited by 46 | Viewed by 4620
Abstract
The utilization of self-healing cerium dioxide nanoparticles (CeO2), modified with organic corrosion inhibitors (dodecylamine (DDA) and n-methylthiourea (NMTU)), in epoxy coating is an efficient strategy for enhancing the protection of the epoxy coating and increasing its lifetime. Fourier transform infrared (FTIR) [...] Read more.
The utilization of self-healing cerium dioxide nanoparticles (CeO2), modified with organic corrosion inhibitors (dodecylamine (DDA) and n-methylthiourea (NMTU)), in epoxy coating is an efficient strategy for enhancing the protection of the epoxy coating and increasing its lifetime. Fourier transform infrared (FTIR) spectroscopy analysis was used to confirm the loading and presence of inhibitors in the nanoparticles. Thermal gravimetric analysis (TGA) measurement studies revealed the amount of 25% and 29.75% w/w for NMTU and DDA in the nanoparticles, respectively. The pH sensitive and self-release behavior of modified CeO2 nanoparticles is confirmed through UV-vis spectroscopy and Zeta potential. It was observed, through scanning electron microscopy (SEM), that a protective layer had been formed on the defect site separating the steel surface from the external environment and healed the artificially created scratch. This protective film played a vital role in the corrosion inhibition of steel by preventing the aggressiveness of Cl in the solution. Electrochemical impedance spectroscopy (EIS) measurements exhibited the exceptional corrosion inhibition efficiency, reaching 99.8% and 95.7% for the modified coating with DDA and NMTU, respectively, after five days of immersion time. Full article
(This article belongs to the Special Issue Functional Inorganic Nanomaterials)
Show Figures

Graphical abstract

15 pages, 3638 KiB  
Article
Acoustic Multi-Detection of Gliadin Using QCM Crystals Patterned with Controlled Sectors of TEM Grid and Annealed Nanoislands on Gold Electrode
by Giuliocesare Casari Bariani, Lan Zhou, Simone Poggesi, Rakesh Mittapalli, Marisa Manzano and Rodica Elena Ionescu
Nanomaterials 2020, 10(4), 790; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040790 - 20 Apr 2020
Cited by 3 | Viewed by 2396
Abstract
Celiac diseases are a group of gluten ingestion-correlated pathologies that are widespread and, in some cases, very dangerous for human health. The only effective treatment is the elimination of gluten from the diet throughout life. Nowadays, the food industries are very interested in [...] Read more.
Celiac diseases are a group of gluten ingestion-correlated pathologies that are widespread and, in some cases, very dangerous for human health. The only effective treatment is the elimination of gluten from the diet throughout life. Nowadays, the food industries are very interested in cheap, easy-to-handle methods for detecting gluten in food, in order to provide their consumers with safe and high-quality food. Here, for the first time, the manufacture of controlled micropatterns of annealed gold nanoislands (AuNIs) on a single QCM crystal (QCM-color) and their biofunctionalization for the specific detection of traces of gliadin is reported. In addition, the modified quartz crystal with a TEM grid and 30 nm Au (Q-TEM grid crystal) is proposed as an acoustic sensitive biosensing platform for the rapid screening of the gliadin content in real food products. Full article
(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
Show Figures

Figure 1

27 pages, 2476 KiB  
Review
Emerging Nano- and Micro-Technologies Used in the Treatment of Type-1 Diabetes
by Rosita Primavera, Bhavesh D Kevadiya, Ganesh Swaminathan, Rudilyn Joyce Wilson, Angelo De Pascale, Paolo Decuzzi and Avnesh S Thakor
Nanomaterials 2020, 10(4), 789; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040789 - 20 Apr 2020
Cited by 35 | Viewed by 6487
Abstract
Type-1 diabetes is characterized by high blood glucose levels due to a failure of insulin secretion from beta cells within pancreatic islets. Current treatment strategies consist of multiple, daily injections of insulin or transplantation of either the whole pancreas or isolated pancreatic islets. [...] Read more.
Type-1 diabetes is characterized by high blood glucose levels due to a failure of insulin secretion from beta cells within pancreatic islets. Current treatment strategies consist of multiple, daily injections of insulin or transplantation of either the whole pancreas or isolated pancreatic islets. While there are different forms of insulin with tunable pharmacokinetics (fast, intermediate, and long-acting), improper dosing continues to be a major limitation often leading to complications resulting from hyper- or hypo-glycemia. Glucose-responsive insulin delivery systems, consisting of a glucose sensor connected to an insulin infusion pump, have improved dosing but they still suffer from inaccurate feedback, biofouling and poor patient compliance. Islet transplantation is a promising strategy but requires multiple donors per patient and post-transplantation islet survival is impaired by inflammation and suboptimal revascularization. This review discusses how nano- and micro-technologies, as well as tissue engineering approaches, can overcome many of these challenges and help contribute to an artificial pancreas-like system. Full article
Show Figures

Figure 1

13 pages, 4898 KiB  
Article
Cellulose Nanocrystals Loaded with Thiamethoxam: Fabrication, Characterization, and Evaluation of Insecticidal Activity against Phenacoccus solenopsis Tinsley (Hemiptera: Pseudococcidae)
by Asem Elabasy, Ali Shoaib, Muhammad Waqas, Zuhua Shi and Mingxing Jiang
Nanomaterials 2020, 10(4), 788; https://0-doi-org.brum.beds.ac.uk/10.3390/nano10040788 - 20 Apr 2020
Cited by 20 | Viewed by 3858
Abstract
Using smart nanopesticide formulations based on nanomaterials can offer promising potential applications for decreasing pesticide residues and their effects on human health and the environment. In this study, a novel nanoformulation (NF) of thiamethoxam (TMX) was fabricated using the solvent evaporation method through [...] Read more.
Using smart nanopesticide formulations based on nanomaterials can offer promising potential applications for decreasing pesticide residues and their effects on human health and the environment. In this study, a novel nanoformulation (NF) of thiamethoxam (TMX) was fabricated using the solvent evaporation method through loading TMX on cellulose nanocrystals (CNCs) as the carrier. The synthesized TMX-CNCs was investigated through different techniques, such as Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and thermogravimetric analysis (TGA). The results revealed that the loading efficiency and entrapment efficiency were 18.7% and 83.7 ± 1.8% for TMX, respectively. The prepared nanoformulation (TMX-CNCs) had a width of 7–14 nm and a length of 85–214 nm with a zeta potential of −23.6 ± 0.3 mV. The drug release behavior study exhibited that the release of TMX from TMX-loaded CNCs was good and sustained. Furthermore, bioassay results showed that the insecticidal activity of TMX-CNCs against Phenacoccus solenopsis was significantly superior to that of the technical and commercial formulation, as indicated by the lower LC50 value. The results indicate that the TMX nanoformulation has great potential for application in agriculture for pest control. Full article
Show Figures

Graphical abstract

Previous Issue
Next Issue
Back to TopTop