Next Article in Journal
TOD District Planning Based on Residents’ Perspectives
Previous Article in Journal
Potential of UAVs for Monitoring Mudflat Morphodynamics (Application to the Seine Estuary, France)
Article

Pull-Based Modeling and Algorithms for Real-Time Provision of High-Frequency Sensor Data from Sensor Observation Services

by 1,2, 1,2,*, 1,2 and 1,2
1
State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079, China
2
Collaborative Innovation Center of Geospatial Technology, Wuhan University, Wuhan 430079, China
*
Author to whom correspondence should be addressed.
Academic Editor: Wolfgang Kainz
ISPRS Int. J. Geo-Inf. 2016, 5(4), 51; https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi5040051
Received: 30 December 2015 / Revised: 30 March 2016 / Accepted: 8 April 2016 / Published: 14 April 2016
The widely used pull-based method for high-frequency sensor data acquisition from Sensor Observation Services (SOS) is not efficient in real-time applications; therefore, further attention must be paid to real-time mechanisms in the provision process if sensor webs are to achieve their full potential. To address this problem, we created a data provision problem model, and compare the recursive algorithm Kalman Filter (KF) and our two proposed self-adaptive linear algorithms Harvestor Additive Increase and Multiplicative Decrease (H-AIMD) and Harvestor Multiplicative Increase and Additive Decrease (H-MIAD) with the commonly used Static Policy, which requests data with an unchanged time interval. We also developed a comprehensive performance evaluation method that considers the real-time capacity and resource waste to compare the performance of the four data provision algorithms. Experiments with real sensor data show that the Static Policy needs accurate priori parameters, Kalman Filter is most suitable for the data provision of sensors with long-term stable time intervals, and H-AIMD is the steadiest with better efficiency and less delayed number of data while with a higher resource waste than the others for data streams with much fluctuations in time intervals. The proposed model and algorithms are useful as a basic reference for real-time applications by pull-based stream data acquisition. View Full-Text
Keywords: sensor web; real-time provision; pull-based data access; Kalman Filter; normalized performance evaluation sensor web; real-time provision; pull-based data access; Kalman Filter; normalized performance evaluation
Show Figures

Figure 1

MDPI and ACS Style

Li, H.; Fan, H.; Li, J.; Chen, N. Pull-Based Modeling and Algorithms for Real-Time Provision of High-Frequency Sensor Data from Sensor Observation Services. ISPRS Int. J. Geo-Inf. 2016, 5, 51. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi5040051

AMA Style

Li H, Fan H, Li J, Chen N. Pull-Based Modeling and Algorithms for Real-Time Provision of High-Frequency Sensor Data from Sensor Observation Services. ISPRS International Journal of Geo-Information. 2016; 5(4):51. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi5040051

Chicago/Turabian Style

Li, Huan, Hong Fan, Jia Li, and Nengcheng Chen. 2016. "Pull-Based Modeling and Algorithms for Real-Time Provision of High-Frequency Sensor Data from Sensor Observation Services" ISPRS International Journal of Geo-Information 5, no. 4: 51. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi5040051

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop