Next Article in Journal
Phenology Response to Climatic Dynamic across China’s Grasslands from 1985 to 2010
Next Article in Special Issue
CS Projects Involving Geoinformatics: A Survey of Implementation Approaches
Previous Article in Journal
Task-Oriented Visualization Approaches for Landscape and Urban Change Analysis
Previous Article in Special Issue
A Citizen Science Approach for Collecting Toponyms
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

A New Method for the Assessment of Spatial Accuracy and Completeness of OpenStreetMap Building Footprints

Department of Civil and Environmental Engineering (DICA), Politecnico di Milano, P.zza Leonardo Da Vinci 32, 20133 Milano, Italy
*
Author to whom correspondence should be addressed.
ISPRS Int. J. Geo-Inf. 2018, 7(8), 289; https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi7080289
Submission received: 29 April 2018 / Revised: 14 July 2018 / Accepted: 20 July 2018 / Published: 24 July 2018
(This article belongs to the Special Issue Geoinformatics in Citizen Science)

Abstract

:
OpenStreetMap (OSM) is currently the largest openly licensed collection of geospatial data, widely used in many projects as an alternative to or integrated with authoritative data. One of the main criticisms against this dataset is that, being a collaborative product created mainly by citizens without formal qualifications, its quality has not been assessed and therefore its usage can be questioned for some applications. This paper provides a map matching method to check the spatial accuracy of the building footprint layer, based on a comparison with a reference dataset. Moreover, from the map matching and a similarity check, buildings can be detected and therefore an index of completeness can also be computed. This process has been applied in Lombardy, a region in Northern Italy, covering an area of 23,900 km2 and comprising respectively about 1 million buildings in OSM and 2.8 million buildings in the authoritative dataset. The results of the comparison show that the positional accuracy of the OSM buildings is at least compatible with the quality of the reference dataset at the scale of 1:5000 since the average deviation, with respect to the authoritative map, is below the expected tolerance of 3 m. The analysis of completeness, given in terms of the number of buildings appearing in the authoritative dataset and not present in OSM, shows an average percentage in the whole region equal to 57%. However, worth noting that the opposite, namely the number of buildings in OSM and not in the reference dataset, is not zero, but corresponds to 9%. The OSM building map can therefore be considered to be a valid base map for direct use (territorial frameworks, map navigation, urban analysis, etc.) and for derived use (background for the production of thematic maps) in all those cases where an accuracy corresponding to 1:5000 is required. Moreover it could be used for integrating the authoritative map at this scale (or smaller) where it is not complete and a rigorous quality certification in terms of metric precision is not required.

1. Introduction

OpenStreetMap (OSM) [1] is currently the largest collaborative and openly licensed collection of geospatial data, widely used in many projects as an alternative to or integrated with authoritative data. OSM was founded in 2004 by Steve Coast as one of the first widespread efforts to provide a mapping platform for volunteered data capture [2]. It started as a mapping exercise for the United Kingdom but it spread quickly to the entire world. Coast’s idea was simple: combining worldwide local geographic data collected by a large number of widespread people who have local knowledge, makes it possible to build a geodatabase of the world [3].
In line with its collaborative mission, OSM data are available under the Open Database License [4]. Maps from OSM have a Creative Commons Attribution-ShareAlike 2.0 license (CC BY-SA) [5]. This license allows everybody to use, distribute, transmit and adapt the data, as long as OSM and its contributors are credited. The license is viral: anyone who alters or builds upon OSM data must distribute the result only under the same license.
Currently, there are almost 4.5 million registered OSM members [6], more than 1 million contributors [7], and the impressive geospatial dataset is supported by software systems and applications, tools and web-based information stores such as wikis [3].
Many authors and commentators have concerned about the rapid and sustained success of OSM. One factor is certainly Web 2.0 [8], which makes it to develop large scale collaborative projects easier where hundreds or thousands of people are able to contribute simultaneously. A second factor is the availability of low-cost, high-quality, and high-accuracy positioning systems as standalone dedicated GPS units or embedded in portable devices such as smartphones. A third factor is related to the rising of so-called citizen science, i.e., scientific activities in which non-professional scientists volunteer to participate in data collection, analysis, and dissemination of a scientific project [9]. The volunteer practice and the outcome of the activities of OSM contributors, which are part of what is called volunteered geographic information (VGI) [10], can also be considered to be a component of “geographic” citizen science [9], both because of the scientific tools the volunteers make use of (remotely sensed images, GPS receivers, and map editing software) and the final collaborative aim they share, which is, mapping the Earth.
In turn, the phenomenon of citizen science can be seen as part of the new attitude towards more general open access, as well as collaborative and sharing approaches to information resources, which was named collective intelligence [11]. On the one side, this results in the willingness of citizens to participate in the knowledge production of the world; on the other side, these collaborative projects, of which OSM can be considered to be one of the most relevant examples, are inclusive and welcome anyone to take part in as a contributor, proposing a role and activities to everybody: beginners, expert level geographers, or software developers.
While the low level for entering and contributing has been one of the keys to the success of the initiative, the counterpoint is that, following a survey made by Budhathoki and Haythornthwaite [12], only 25% of the participants have “professional GIS experience” and therefore we are expecting a lower quality of the database compared with other sources, like data of national, regional and local mapping agencies as well as that produced by professionals and companies.
Some web tools are provided for mitigating and reducing errors. Examples related to geometry or topology are: the OSM Map Compare tool [13], which allows visual comparison of OSM map layers with other popular mapping systems such as Google maps [14], Bing maps [15], HERE maps [16], ESRI maps [17], etc.; Ma Visionneuse [18], which allows OSM to be compared with IGN (French National Institute of Geographic and Forest Information) France layers, amongst others; OSM Inspector [19], which shows potential errors like long segments in polygons and polylines, called “ways” in OSM, self-intersecting ways, polygons, or polylines which are represented by only one point, called “nodes” in OSM, and polygons or polylines containing duplicate nodes (for details about the topological model of OSM, see the following sections).
A useful application, named Taginfo [20] helps to check the tags and therefore the thematic quality. JOSM Validator [21] is a core feature of one of the most advanced editing tools of OSM. It checks and fixes a wide variety of problems, including topological errors, unclosed polygons and overlapping areas.
Osmose [22] and Keep Right [23] highlight errors in geometry/topology, tags, attribution, and other general OSM errors. MapRoulette [24] is a gamified application to fix errors in OSM. Each challenge proposes a set of tasks, which vary in difficulty, allowing contributors to choose the types of errors they feel more confident about fixing. DeepOSM [25] trains a neural network with OSM tags and aerial imagery, allowing the prediction of mis-registered roads in OSM. The Grass&Green project [26] is meant to correct tagging or classification of land use features involving grass or green areas.
Despite this huge number of applications for alleviating or correcting errors, some inaccuracies still remain and assessing the quality of the OSM spatial database is an issue on the agenda.
The ISO/TC 211 (technical committee) of the International Organization for Standardization (ISO) defines geographic information quality as the totality of characteristics of a product that bear on its ability to satisfy stated and implied needs. The quality measures that are considered for assessing VGI [27] are in general the most significant of the ISO 19157: 2013 Geographic Information—Data quality [28]: positional, thematic and temporal accuracy, completeness and consistency, even if there is still lack of formal standards for OSM.
“Accuracy” refers to the degree of closeness between a measurement of a quantity and the value which is accepted as true for that quantity. “Completeness” is assessed with respect to features, attributes, and model [29]. It can be evaluated in terms of commission errors, i.e., excess of data, and omission errors, i.e., absence of data. “Consistency” evaluates the coherence in the data structures; the errors resulting from the lack of it can be classified as referring to the conceptual model, domain, format and topology.
The assessment of OSM is a hot research topic and the majority of scholars have been contributing to this topic comparing the database against authoritative ones.
Hecht et al. [30], for instance, evaluated OSM building completeness in two regions of Germany applying different methods. The results highlighted a low degree of completeness, which was better in urban areas than rural areas, and also that the choice of method used for assessing the completeness has a high effect on the estimated value. Fan et al. [31], in comparing the building OSM dataset with the official one of Munich (Germany), found its high completeness over the city. However, with respect to the positional accuracy, the result was not so good as an average offset of about 4m exists between the two datasets. Conversely, they found that the footprints in the OSM dataset were highly similar to those in the reference dataset in terms of shape, the main difference being in fewer details (i.e., fewer points) in the polygons.
A different method, based on homologous point detection, was proposed by Brovelli et al. [32] on the city of Milan. The results seemed promising and the authors, considering also that there is not a consolidated and unique way for assessing spatial accuracy and completeness of the buildings dataset of OSM, decided to propose a new method and to test it on a significant case study covering the Italian region of Lombardy, which has an extent larger than the half of Switzerland and comprises both rural and highly populated urban areas. Moreover, as map matching approaches are more challenging in dense urban areas, where buildings are located close to each other and similar in shape and size [33], the authors also analyzed the outcomes focusing on the capitals of the provinces of the region.
The proposed methodology is partially derived from previous work of Brovelli and Zamboni [34,35] whose aim was authoritative map matching and warping. The method was based on the characteristics of the compared maps, specifically the existence of well-defined and rigorous prescriptions for their production. In this new approach, a different equality function was used because of the heterogeneity of the methods (and related accuracies) used by volunteers in collecting data.
The outcome of the paper is twofold: firstly, the presentation of the approach, which even though it still needs to be refined and compared to other methods, has good performance. Secondly, the evaluation of the positional accuracy and completeness of a significant dataset; the result on 940,000 buildings in the OSM map and about 2.8 million buildings in the Lombardy Regional Topographical Database (DBT) map shows that the quality of the OSM buildings is comparable to that of the regional technical authoritative map at the scale of 1:5000 everywhere, even in dense urban areas.
The remainder of this paper is structured as follows: Section 2 gives an overview of research related to this paper; Section 3 and Section 4 respectively describe the method implemented for assessing the spatial accuracy and the completeness; Section 5 presents the results of the test areas, and Section 6 summarizes the outcomes of the whole work and draws some activities for the future.

2. Related Work

As said, in recent years many researchers have been working on the assessment of OSM data. While significant attention has been paid to OSM positional accuracy assessment and completeness, fewer authors have investigated semantic, temporal and thematic accuracy, and consistency [36] and none, to the best of the authors’ knowledge, have assessed all the elements of data quality. As the method presented in the paper allows the assessment of positional accuracy and feature completeness, the analysis of the previous literature was mainly concentrated on these two aspects.
In the beginning, studies focused on the quality assessment of OSM road networks, which were the primary subjects of the OSM survey. The first studies date back to 2009. In their works, Ather [37], Haklay [38] and Koukoletsos et al. [39] assessed the positional accuracy of OSM streets in England (in an area corresponding to about 100 square kilometers) by a visual comparison of a limited number of roads with an authoritative dataset and a statistical approach based on a buffer technique developed by Goodchild and Hunter [40]. Moreover the completeness of the dataset over all England was estimated comparing the lengths of the roads in OSM with those of the Ordnance Survey vector datasets (the official dataset used for the assessment). Kounadi [41] did a similar experiment in Athens, where he considered around 300 roads and obtained results comparable to Hakley’s, i.e., an average difference between OSM and official roads of about 6 m and an average overlap of nearly 80%.
Cipeluch et al. [42] visually analyzed roads of five case study cities and towns in Ireland, finding slightly different results case by case, but highlighting that the OSM dataset merited attention if compared with other data, like the imagery available in Google Maps and Bing Maps. Moreover, they concluded that there is a need to develop metrics that allow the measurement of both accuracy and coverage at neighbourhood, county, and country levels so that the quality of the dataset can be quantified.
In the following years, other research studies were based on the buffer zone methodology [43,44,45,46,47]. The results are not homogeneous if we compare the different areas investigated. In Europe generally the spatial accuracy and the completeness were good enough, while in South Africa for instance, the dataset did not meet the accuracy requirements for the integration with the authoritative database.
Al-Bakri and Fairbairn [48] assessed OSM in areas of England and Iraq by comparing reference survey data sets, and again the buffer method was used. They concluded that the integration of OSM data for large scale mapping applications was not viable.
Helbich et al. [49], in a case study of a city in Germany, used bi-dimensional regression analysis to evaluate the global geometries of the patterns and detected clusters of high and low precision by means of local autocorrelation statistics. They found that the OSM areas of high accuracy were primarily located in more populated parts of the city, leading to the conclusion that these areas were subject to more frequent validation, with consequent correction of errors, than rural areas.
Antoniou assessed the positional accuracy by evaluating, from geometry and semantics, the distance between corresponding intersections of the road network [50].
Girres and Touya [51] applied multiple methods to deal with the complexity of the analysis of the data, like the Euclidean distance for point features; the average Euclidean distance for linear features; the Hausdorff distance for linear features; and the surface distance, granularity, and compactness for area features. In their work, a limited number of homologous features, i.e., features representing the same object in the OSM and authoritative datasets, were selected and matched manually to avoid errors related to automatic processes. Differences in position were then computed on each pair of homologous objects. While the mean distance was acceptable, the standard deviation was definitely larger than the reference accuracy used for official datasets, showing that there was a huge heterogeneity in the quality of the data. Regarding completeness, they found that, using the number of objects as an indicator, OSM was far from being complete (around 10%); the completeness improved, however, when they considered the comparison between the total length/area of the objects, obtaining an average value of around 40%. This result clearly showed that shorter/smaller objects are more likely to be absent, reflecting the fact that volunteer contributors tend to map the most important elements in the road network.
In 2013, Canavosio-Zuzelski et al. [52] proposed a rigorous photogrammetric approach based on stereo imagery and a vector adjustment model for assessing the positional accuracy of several OSM city streets. Forghani and Delavar [53] analyzed the data of one central urban zone of Tehran with a method combining different geometric elements—like road length, median center, minimum bounding geometry and directional distribution—concluding that the quality of OSM roads can be considered of medium level, mainly due to their heterogeneity. Brovelli et al. [54,55] introduced an automatic procedure based on geometrical similarity and a grid-based approach for the evaluation of road completeness and positional accuracy. The procedure was tested with good results on Paris, but it is completely flexible and can be reused by anybody because it is available as open source modules of the GIS GRASS [56].
The general comment about the assessment of OSM roads is that, even if many studies have been done, a general automatic solution does not yet exist and therefore there is still room in this field for investigating methods and developing new procedures.
Apart from the assessment of roads, in recent years researchers have also started assessing other objects in the OSM database, such as building footprints. To investigate the suitability of OSM data for the generation of 3D building models, Goetz and Zipf [57] provided a first quantitative analysis of OSM completeness, simply comparing the number of buildings mapped in OSM and the total number of buildings derived from the census data in Germany and showing that (in 2012) OSM covered around 30% of the total buildings. Hecht et al. [30] proposed four different methods for assessing the completeness with respect to the authoritative database: two respectively based on the comparison of building numbers and building areas calculated for reference unit zones (unit-based methods); and two respectively based on centroid and overlap for the detection of corresponding buildings in the two datasets (object-based methods). Their results indicated that the unit-based comparisons are highly sensitive to differences between the authoritative and the OSM data modeling, while object-based methods are more sensitive to positional mismatches of the OSM buildings. Anyhow, based on the analysis of many case studies, they concluded that object-based methods are preferable.
Fram et al. [58] assessed the quality of OSM buildings in different cities in the UK with the aim of investigating the potential of OSM data in applications of risk management solutions, such as natural catastrophe exposure models. The study was conducted applying the area unit-based method through a comparison against the authoritative datasets, and showed that OSM building completeness is very variable both within and between UK cities. Moreover, they tried to find a proxy variable for better computing the OSM completeness but they were not able to arrive at a satisfactory result.
Fan et al. [31] evaluated the quality of OSM in terms of completeness, semantic accuracy, positional accuracy, and shape accuracy by using building footprints of the official German dataset as reference data. Limiting the results to the indicators of interest for this paper, completeness was based on the area, identifying as corresponding objects those with an overlapping area that is larger than 30% of the smaller area of the two objects in OSM and the authoritative data. When one building of OSM matched only one building in the reference dataset (relation 1:1), the key points of the reference footprint were extracted using the Douglas-Peucker algorithm [59]. Next, the minimum bounding rectangles (MBRs) were calculated for the two polygons and their edges marked if they were located respectively on the edges of the corresponding MBR (OSM or reference). Again, the OSM MBR was shifted to the center of the reference MBR, in such a way that edges of these two MBRs could be matched if they were located (almost) on the same place. Finally, the edges of the footprints were matched if they were marked to the same edge of the MBRs. Regarding the positional accuracy, only buildings with a 1:1 relation were involved in the analysis and the accuracy was computed from the average distance between corresponding points in the pair of footprints in the two data sets. Finally, they also proposed computing the shape similarity between buildings, based on the turning function or tangent function introduced by Arkin et al. [60] for measuring the similarity of two polygons.
Törnros et al. [61] assessed OSM building completeness by comparison with a reference dataset, the official cadastre, and adopting the unit based method. However, they proposed a step forward with the computation of uncertainties given in terms of true positives, i.e., reference building areas that have been correctly mapped in OSM; false negatives, i.e., reference building areas not mapped in OSM; and false Positives, i.e., OSM building areas not mapped in the reference data set. Their conclusion was that it is best to adopt the true positive rate (building areas overlapping in OSM and the reference data) as a method for estimating the building completeness.
In the same year, Müller et al. [62], compared the OSM buildings with the authoritative ones in Switzerland with a procedure based on the respective centroid distance and the comparison of the shape signature based on the Arkin algorithm [60]. In more detail, the threshold of the centroid distance for correspondent buildings in the two datasets was set to 20 meters and the average of the turning function for matching buildings corresponded to around 1.25.
Finally, Brovelli et al. [32] assessed the completeness and the positional accuracy in Milan (Italy) using, for the former, the area unit based approach with the computation of uncertainties already seen in other studies, and, for the latter, a new method based on the automatic matching of the points of the footprints. The work presented here is a step forward in the definition of this second approach, which aims at contributing to the debate about positional accuracy and completeness of OSM, a debate that is still open.

3. Methodology: Spatial Accuracy

The assessment of the spatial accuracy proposed in this paper is based on the evaluation of the distance between points representing the same features in two different maps (or layers) depicting the same area. The implemented algorithm works on vector layers considering the vertices of the map features as a set of coordinates. In detecting the homologous entity (in our case the building footprint), the algorithm emulates what a human operator would do: it compares the position, the shape and the semantics of the features on the two maps.
Obviously, to find such a correspondence, the two maps must have more or less the same scale and they must show more or less the same level of detail (LoD).
In cartography the scale is a well-defined concept (“ratio of the length of an object on the map by the length of the same object on the ground”); conversely, LoD is a vague notion which can be considered as the translation of map scale for use in geographic databases for which the scale is not fixed [63].
Speaking about OpenStreetMap, it is a community project and few guidelines have been established about the LoD in order to have rich datasets influenced by the diversity of the contributors. This is a tricky issue because on the one hand, this represents the fullness of the geodataset (and also one of the reasons for the success of the project); on the other hand, it can be a limitation because this diversity affects the resulting data quality [64]. This heterogeneity leads to LoD inconsistencies, i.e., some very detailed features and some less detailed features may coexist on the map. Generally, the people contributing to the map do not have a formal professional background as map-makers and do not use the same surveying tools (the use of professional tools is not required). This is the main reason for the diversified contributions, which can be very detailed or very poor, depending on the skill and scrupulousness of contributors and on the method used for mapping.
Data are collected in heterogeneous ways: in the field, doing what is called armchair mapping or as bulk import. In the first case, the OSM contributor walks around and records GPS points or tracks; generally, low cost receivers are used in this operation. In the second case, data are traced mainly by interpreting satellite imagery uploaded to the OSM platform or by integrating additional single or small free and open datasets from websites. Therefore, we can assume that majority of this data has more or less the same accuracy as the satellite images available for the area they refer to. The last method, considered as a supplement to data collected by individual volunteers, consists of importing free and open datasets, controlling the coherence with the existing data through a complex merging process. This collection method is done by expert users and generally data are authoritative, i.e., the LoD depends on the scale of the source dataset.
The heterogeneity of the collection affects the scale of the OSM geodatabase [65]. Moreover, the LoD varies not only from one theme layer to another (e.g., the buildings are detected with different detail than the road edges), but also from one feature to another in the same theme [51]. Moreover, it has been documented that the positional quality of features improves as more contributors add data or modify a feature [38].
On the other hand, if we consider authoritative maps, they are generally produced by (or under the control of) a national, regional or local mapping agency that conform to well-defined guidelines, i.e., the LoD is homogeneous in the whole map.
The maps to be considered for assessing the OSM spatial accuracy must be the most accurate possible, i.e., large scale maps at urban scale, 1:1000–1:2000 or, in the worst case, at regional scale 1:10,000. In the former case, the accuracy is such that we can consider our procedure as a validation. In the latter case, it is more like a comparison, even if the authoritativeness of the map makes it suitable as a reference.
Given that the map depicts similar details, we define homologous pairs as points that, considering the scale of the map and the consequent cartographic error, are at the same location in both geo-datasets and represent the same feature. An example can be the corner of a building or an isolated feature represented by a point, which, as already mentioned, is modelled with a node in OSM.
In our method, we decided to deal with the building footprint layer, detecting the homologous pairs representing the vertices of the buildings. At first glance, the problem seems to be trivial, but many factors can affect the differences of two layers representing buildings of the same area: different LoD, different update of the maps, errors, etc. If the building is a simple one, modelled as a rectangle in both geodatabases, finding the homologues is trivial. However, if the shape of the building is complex, with details of protruding parts such as terraces, balconies, stairs, etc.—the search becomes more challenging, specifically in zones where there is a high density of buildings close to each other.
The visual and manual detection of these homologous pairs is easy, but it is time consuming, especially if we are dealing with a big geodataset composed of millions of points. To avoid the time-consuming manual search for these corresponding points and the possible human errors in their detection, a strategy is needed to automate the procedure. The idea is to reproduce as much as possible what operators do when they try to mentally overlay the two maps. The first step consists in visually searching for the same features represented on the two different maps.
We can simplify this operation in three steps: the analysis of the position of the points that describe the vertices of the features (position comparison), the analysis of the segments (edges) joining the vertices and forming the polygon (shape comparison), and finally the content analysis, i.e., what the polygon represents (semantic comparison). Starting from the conceptual model that every cartographic entity is essentially defined by points (coordinates) and by the meaning of the points themselves (semantic attributes), the simplest way to search the homologous points can be summarized as follows: a point P1 on a map m1 is homologous to a point P2 on a map m2 if the two geographic shapes related to the two points correspond in geometry and semantics.
Referring to the semantic aspect and focusing only on the building footprints, the check can be easily done by extracting the layers corresponding to buildings from the two geodatabases. In the case of OSM, the features tagged as buildings are taken into account; in the case of the authoritative geodatabases, it depends on the conceptual schema and the adopted nomenclature. In the following, we assume that this step has already been carried out and we refer to the description of the case study presented in the next session for further details. Figure 1 shows an example of some homologous points that can be manually detected in the same area of two different maps.
Before starting the detecting operation, we perform a raw fitting of the two maps, consisting in an affine transformation, done by applying a least square estimate on (at least) five visually and manually selected points. In the case of a rectangular map, the best choice is to pick out four points at the corners and the fifth in the center of the map.
The affine transformation is widely applied in map conflation, especially when the coordinate systems of one or both of the datasets are unknown. In most cases, the coordinate systems of the maps are known and it should be possible to directly overlap the two datasets without a pre-alignment. Even if the affine transformation cannot decrease local deformations by applying the same geometric correction homogeneously over the entire dataset, it is always preliminarily applied by the algorithm in order to reduce any systematic misalignments eventually introduced by approximate geodetic transformation methods often used in the common Geographic Information System (GIS). Moreover, the pre-transformation allows the users to indistinctly apply the algorithm independently of the known or unknown coordinate reference systems, thus making it a generalized approach.
The algorithm allows the user to choose the type of affine transformation depending on the type of cartographic data taken into account:
-
The general affine transformation, consisting of a roto-translation with anisotropic variation of scale and skew (six parameters), can be used when there is no information on the reference system of the map to be evaluated and/or the acquisition methods (e.g., digitization of scanned paper maps) may have been homogeneously distorted the map altering the corners (e.g., altering the scale only along the acquisition axis of the scanner);
-
The conform transformation, consisting of a roto-translation with isotropic variation of scale (four parameters), can be used when you want to be sure that the transformation does not change the shape of the geometries (preserving the corners of the original map);
-
The translation, consisting of a degeneration of the affine transformation in which only the two shifts along the Cartesian axes are estimated (two parameters), can be used when the two maps are not in the same reference system but these are known: it is therefore possible to apply a datum transformation, usually implemented by the most common GIS. In these cases, the translation can compensate for any slight misalignments due to the fact that in some cases these transformation formulas are not rigorous but derived from approximate estimates.
Finally, it is also possible to avoid the pre-alignment of the two maps when they are natively in the same reference system or the user is certain that the transformation between datums has been carried out with rigorous methods.
Depending on the choice of applying the affine transformation or not, the algorithm searches the homologous points in an iterative process or in one step.
When the affine transformation is used, starting from the five points manually selected by the user, an iterative process is executed where at each step the affine parameters are estimated and the set of homologous points are determined. The whole procedure is repeated until the number of detected points becomes stable (see Figure 2).
When the transformation is not used, the set of homologous points are determined directly on the original maps and the schema of the algorithm represented in Figure 2 is reduced to the process box labeled with “Automatic search for homologous points”.
The “Automatic search for homologous points” algorithm can be summarized as follows: if dist(P1(i),P2(k)) is the distance from the point P1(i) on map m1 to point P2(k) on map m2, for each P1(i) (i = 1, …, N) on m1 we search for the point P2(k) on m2 which satisfies the condition of minimum distance from P1(i). If P1(i) and P2(k) are “geometrically compatible” (as described in detail below), P1(i) and P2(k) are set as homologous points.
The algorithm allows the choice of two different distances to measure the proximity of the candidate homologous points: a geometric distance and a statistic one. The former is the standard Euclidean distance while the latter is based on a Fisher test to establish if two candidate homologous points are compatible with the transformation model [34].
From the coordinates of the candidate homologous points and from the deterministic and stochastic model of the least squares approach used to estimate the transformation, we compute a variate F0, which can be compared, with a fixed significance level α, with the critical value Fα of a Fisher distribution of (2, n − m) degrees of freedom. The first degree of freedom (the value 2) expresses the fact that we are considering a bi-dimensional problem. In the second degree of freedom, the number of observations used in the least square estimate—i.e., the n coordinates of the n/2 homologous points, and the m transformation parameters (6, 4, or 2, according to the chosen transformation) appear.
The test to accept the hypothesis H0: {P1 is homologous of P2} can be formulated as follow: if H0 is true then F0 must be smaller than Fα with probability (1 − α), otherwise H0 is false.
Without detailing the test, we notice that moreover, to guarantee the uniqueness of the associations, for each point P1(i) on m1 and the N points P2(k) (k = 1, …, N) on m2 which satisfy the hypothesis H0, we selected the pair with smallest F0.
The advantage of this approach, compared with the simple check of the standard geometric distance, is having a probability index that expresses the precision and the correctness of each homologous point association.
Beyond the distance, the “geometric compatibility” is based on the direction angles of the segments starting from the points and the inner corner of the edges of the polygon measured along the perimeter in a clockwise orientation.
Two points have an angle compatibility if both the direction angles of the common incoming segments and the corner angles are similar within a certain tolerance, hereafter indicated as αTOL (see Figure 3).
A step-by-step description of the algorithm with the use of the affine transformation can be summarized as follows:
  • manual selection of five homologous points on the two maps m1 and m2;
  • application of an affine transformation estimated using coordinates of the previous five points;
  • repeat
    • for each point P1 on the map m1:
      • search the point P2 on the map m2 which satisfies the following conditions:
        • minimum distance from P1 to P2
        • the direction angles of all the incoming segments from the point P1 are similar, within a certain tolerance αTOL, to all the incoming segments from the point P2
        • the inner corner of the edges P1 measured along the perimeter of the polygon in a clockwise orientation is similar, within a certain tolerance αTOL, to the inner corner of the edges P2
        • if P2 exists, set P2 as the homologous point of P1
    • application of an affine transformation estimated using the new automatically detected homologous points
  • until the count of homologous points converges
A step-by-step description of the algorithm without the use of the affine transformation can be summarized as follows:
  • for each point P1 on the map m1:
    • search the point P2 on the map m2 which satisfies the following conditions:
      • minimum distance from P1 to P2
      • the direction angles of all the incoming segments from the point P1 are similar, within a certain tolerance αTOL, to all the incoming segments from the point P2
      • the inner corner of the edges P1 measured along the perimeter of the polygon in a clockwise orientation is similar, within a certain tolerance αTOL, to the inner corner of the edges P2
    • if P2 exists, set P2 as the homologous point of P1
It is important to underline that the map transformation is used by the algorithm exclusively in the iterative search for the homologous pairs. The algorithm does not alter the coordinates of the input data and therefore the coordinates of the homologous points exactly match the coordinates of the original maps. In this way, the distance of the pairs can be used as a correct indicator for the assessment of the spatial accuracy of the maps.
A possible problem, also found in the test case shown in the next section, consists in not being able to find homologous points, in certain areas, due to the incompleteness of one or both maps. In fact, there may be situations in which in some areas there are data in the former map but not in the latter or vice versa. Generally, the reasons vary: maps may have been made or updated at different times and therefore what they depict is not exactly the same due to the evolution of the territory; they may depict different LoDs; or simply, and this is common enough in OpenStreetMap, some areas are less mapped because of a lack of volunteers in those zones who decided to map them.
Obviously, this is a factor that we have to consider in our analysis. As we are using an automatic detection of homologous pairs, some non-recognition of homologous points could be due to limitations inherent in the adopted method. Others, like the one mentioned, are unavoidable and even the most meticulous manual operator would not detect them.

4. Methodology: Completeness

For dealing with the incompleteness of the data, a parameter, distdata, was defined. This can be calculated by comparing the number of detected points with the total number of vertices of all the buildings on the two maps (therefore we have two values, corresponding respectively to the former and latter map). Moreover, for dealing with the different levels of detail, to avoid considering missing buildings, a corrective calculation was introduced which does not consider the vertices of the buildings present in the first map that are not represented in the second one when counting the potential homologous pairs (i.e., the total number of vertices of the buildings).
Finally, we defined that a vertex on the first map does not have potential homologous in the second one (and must not be counted in the statistics) if there are no vertices in a significant neighborhood, where the significant neighborhood depends on the parameter distdata. These points are called “isolated points”.
The reasoning used for the completeness of the points can easily be extended to calculate the completeness of buildings. In fact, if all the vertices of a building are classified as isolate, then the building itself is considered isolated.
The percentage of isolated buildings can therefore be used, in addition to the quality of the data, to identify incomplete areas of a map (with respect to a more updated one) since the main and basic information usually depicted in a base map corresponds to streets and buildings.
The other factor that we mentioned and that has to be considered is the possible different levels of detail used to represent the same building on the two maps. According to the nominal scale of the maps (if this element was taken into account in its production; this is generally true for the authoritative maps) and to the different attention of the operators who digitized them, a building can be schematized for instance as a simple rectangle in a map or as a complex detailed polygon in the other one.
In this case, the more detailed map will have more points, many of which will not have a corresponding counterpart on the other map. These points, which we decided to call redundant points”, should not be considered when counting potential homologous pairs, similarly to what we did for the isolated points.
Another set of points we did not consider is composed of all the vertices that do not represent significant variations in the shape of the buildings. These points are essentially intermediate vertices positioned along the effective edges and describe the geometry of not perfectly straight lines or that are used to model non-accentuated curves as a succession of segments with slight angular variations.
Also, in this case, the positioning and the number of these vertices depend on the subjectivity of the digitizer and on the scale of representation of the map: therefore, it is advisable not to take them into consideration. The parameter αtol, already defined to compute the angular compatibility of the vertices, can be used to set the threshold under which not to consider an edge significant and therefore disregard it in the search algorithm.

5. The Lombardy Region Case Study

5.1. The Regional Topographical Database (DBT)

The methodology discussed in the previous section was applied to Lombardy, which is one of the northern regions of Italy, with an extent of about 23,900 km2, a population of about 10 million and a population density of 420 people per km2. This area was chosen because of its high level of urbanization and because of the availability of a good authoritative map to be used for checking the quality of the OpenStreetMap data. The official vector base map of the Lombardy region is named Regional Topographical Database (DBT). The DBT is the digital reference base for all planning tools made both by local authorities and the region, as defined in article 3 of the Regional Law 12/2005 for the Government of the Territory. It is a geographic database comprising various digital territorial information layers that represent and describe the topographic objects of the territory. Its main contents are: buildings, roads, railways, bridges, viaducts, tunnels, natural and artificial watercourses, lakes, dams, hydraulic works, electricity networks, waterfalls, altimetric information (contour lines and elevation points), quarries and landfills, plant covers, etc. Each object consists of a cartographic feature and an alphanumeric table, to which any other descriptive information is added according to the thematic layer: use and state of conservation of the building (residential, industrial, commercial, etc.), type of road surface (asphalted, starred, composite pavement, etc.), type of vegetation (divided into forests, pastures, agricultural crops, urban green, areas without vegetation), etc.
The survey scale is very detailed for urban areas (1:1000–1:2000) and at medium-scale for extra-urban areas (1:5000–1:10,000).
The DBT is carried out in collaboration with local authorities to have a unitary and homogeneous cartographic reference for all municipalities, provinces, the Lombardy region, other authorities and professionals. It is the main cartographic data used to build a regional Territorial Information System (SIT) in which all the thematic data and the plans of the various authorities converge. The DBT is the appropriate basis for municipal urban planning and other land planning tools. Moreover, it is the reference for all cartographic elaborations for anyone who wants to present a project to a public administration.
The technical specifications of the DBT are defined in official documents where the geometric accuracy is also prescribed. The standard deviation σ used as reference to define the accuracy of the map is defined for each cartographic scale. The tolerance for each DBT scale is defined equal to 2σ. The distribution of the residuals (the difference between the coordinate of the points stored in the DBT and their real coordinates, measured on randomly extracted samples) is always considered a normal one and therefore, in the quality control phase, only 5% of the absolute values of the differences can be higher than the tolerances. To further guarantee the quality of the data, the technical specifications prescribe that the residuals must in no case exceed twice this value; the maximum acceptable difference, in an absolute value, is therefore equal to 4σ.
Regarding the planimetric content of the DBT, the standard deviation for the various scales is as follows: for the scale 1:1000 σ = 0.30 m; for the scale 1:2000 σ = 0.60 m; for the scale 1:5000 σ = 1.50 m; and for the scale 1:10,000 σ = 3.00 m.
Similarly to the planimetric content, the altimetric accuracy is also prescribed. The standard deviation for the various scales is as follows: for the scale 1: 1000 σ = 0.30 m; for the scale 1:2000 σ = 0.40 m; for the scale 1:5000 σ = 1.00 m; and for the scale 1: 10,000 σ = 2.00 m.
Since, in the OSM, the altimetric information is not defined for buildings, in our tests the altimetric quality was assessed.

5.2. Zonal Positional Accuracies

The whole area of the Lombardy region was considered for the comparison of the OSM buildings with the homologous DBT building layer and, in the first instance, the whole area was divided into squares using a regular grid of 7 × 7 cells (see Figure 4). Splitting the region into cells was a result of the very large amount of data to be analyzed (as an order of magnitude, millions of buildings are involved). It is a common solution of breaking down a problem into more sub-problems of the same type, until these become simple enough to be directly solved [66]. The selection of the cell size was made based on two aspects: the type of possible misalignment of the two maps and the available hardware resources. When maps have a homogeneous misalignment, the cells can be wider than in the case of different localized misalignments, where a limited number of cells is preferred since the affine transformation is able to locally compensate for these deformations. Regarding the hardware resources, with smaller cells the computational performance is better (both in terms of required computation time and memory). A preliminary analysis of a sample dataset was performed and the optimal size of the cell was set to about 1000 km2. Considering the total area of the case study, the minimum cell number of a regular grid that contains the whole region is equal to 49 (7 × 7). The irregular shape of the region leaves 11 cells without data. Hence the following results will refer to a sub-dataset of 38 cells instead of 49.
Since both the DBT and the OSM are dynamic maps constantly updated in a non-homogeneous way, it is not possible to define a unique date of realization of the whole dataset. It is therefore difficult to have a time alignment of the two maps since it would be necessary to compare the update dates zone by zone. Anyhow, in order to have a “time stamp” of the data used in the following tests, both maps were downloaded from the official repository at the same time (August 2017).
The parameters for the homologous points search algorithm were set according to the DBT accuracy. The maximum distance within which to search for a homologous point was set to 4σ, corresponding to the maximum acceptable tolerance of the DBT.
Since the DBT Lombardy region is a mosaic of different local DBT at different scales (usually 1:1000 for historical centers of the city, 1:2000 for dense urbanized area, 1:5000 for peripheral sparse urbanized area and 1:10,000 for non-urbanized areas), the least restrictive tolerance among the urbanized areas was considered (σ = 1.50 m). The maximum distance was therefore set to 6.0 m.
Based on the same reasoning, the maximum distance used to consider a building to be isolated (isolated = without a corresponding homologous building on the other map), was set to twice the maximum tolerance and therefore set to 12.0 m.
Since only buildings were taken into account as geometric entities, the edges can define the shapes usually have corners of about 90 degrees and, more generally, greater than 45 degrees. With such a wide margin, it is therefore reasonable to not consider any data with vertices corresponding to angles of less than 10 degrees.
In the DBT, the building is defined as the whole of the volumetric unit that forms a body with a single building type; it may have several categories of use, it has a given state of conservation and it may have underground portions. Several alphanumeric attributes are available to describe it in detail. The main data are the building type (attribute: EDIFC_TY; values: generic house, terraced house, sports building, skyscraper, shed, monumental building, castle, etc.), the use (attribute EDIFC_USO; values: administrative, residential, public service, transportation services, commercial, industrial, etc.), and the state of conservation (attribute: EDIFC_STAT; values: in use, under construction, disused, etc.).
In order to make a direct comparison with the OSM buildings, only the geometries of the DBT buildings are taken into account, i.e., those being compatible with the OSM building model.
OpenStreetMap features are provided according to a topological data model [67]. The nodes describe points in the space by their latitude, longitude, and their identifier. The ways, which describe links, consisting of an identifier and an ordered list of between 2 and 2000 nodes. Relations allow the description of relationships between elements (which can be nodes, ways, and other relations). A feature is based on one of those three elements. Furthermore, it consists of a list of pairs (a key and a value) of called tags. Even if in principle arbitrary keys and values can be added to features, the OSM community agrees on certain key-value combinations for the most commonly used tags.
In the “standard” OSM model, buildings are features that have a tag with the key “building” [67]. The value of the tag may describe the type of accommodation (e.g., “apartments”), of commercial use (e.g., “warehouse”), of religious use (e.g., “cathedral”), or of civic/amenity use (e.g., “train station”), even if the most basic one is simply: “building = yes”. For about 82% of all buildings [20], the value of the tag is purely “yes”. For our purpose, we considered all typologies. There are currently about 282 million buildings in the OSM dataset [67], about 940 thousand in the Lombardy region. These buildings were used in our checking, subdividing them according to the grid we used for the DBT.
As explained in the previous theoretical section, the algorithm allows us to choose whether to apply a pre-alignment of the maps with an affine transformation (using an iterative approach) or to proceed directly to the search of the homologous points in one step.
In the following tests, all the solutions were investigated in order to analyze the differences, both in terms of homologous points found and in terms of reported statistical accuracy.
We expect that as a result of increasing the number of parameters of the transformation from 0 parameters (no transformation) up to six parameters (general affine transformation), the alignment of the two maps improves and therefore the number of homologous points, detected by the algorithm, increases. The greater the initial misalignment of the two maps, the greater the increase will be. Conversely, if the two maps are already well aligned, the number of homologous points is stable when the transformation changes.
Regardless of the number of points, if the accuracy of the OSM map is substantially homogeneous on the examined territory, the statistics on the distance between the homologous pairs should not change significantly. In fact it is important to remember that the transformation of the map is used exclusively in the iterative search process of the homologous pairs. At the end of the process the statistics on the distance of the pairs are calculated on the coordinates of the original maps (otherwise the results would no longer represent the accuracy of the original OSM map but the accuracy of the geometrically altered OSM).
The results for each cell obtained with no transformation in the search process are shown in Figure 5, while the results obtained using the general affine transformation in the search process are shown in Figure 6. Specifically, for each cell in Figure 5a and Figure 6a, the number and percentage of homologous points detected by the algorithm are reported, while Figure 5b and Figure 6b show the mean (M) and the standard deviation (S) of the distance of the points in the two maps. To get an indication of the correction to the statistics due to the highest number of homologous points detected using the affine transformation, the average differences are about 0.02 m for the mean and 0.03 m for the standard deviation. The results confirm that, in our case, the two datasets were already aligned since the pre-alignment does not introduce significant improvements on the number of points detected. We know that this is not true in general; for instance, in case of Munich an offset of about four meters on average in terms of positional accuracy was found [31]. Anyhow, the purpose of the proposed method was to be general and to allow global transformation for alleviating possible misalignments, which makes the automatic search of homologous pairs more difficult.
The percentages of homologous points detected with respect to the total potentially usable points (below indicated with P) can theoretically be computed both in the OSM map (POSM) and in the DBT map (PDBT). By calculating these two values, it emerged that POSM was always significantly greater than PDBT and it can be explained taking into consideration the redundant points. In the OSM map, the buildings are less detailed than in the DBT map and therefore there are more vertices in the DBT map that do not have a corresponding point in the OSM map. These points cannot be used by the algorithm and the result of the ratio between the number of homologous points detected and the total number of the points in the map inevitably decreases.
For these reasons the value POSM, referred to the less detailed map, can be considered a reliability/quality index of the statistics reported in the figure as it represents the correct percentage of used data compared to potentially usable data.
The final results of the whole Lombardy region obtained, considering all the homologous points detected in each cell and differentiated by the type of transformation used in the search process, are reported in Table 1. With respect to the previous statistics, the percentiles are also reported in order to have more information about the compatibility of the maps.
Also in this case, the statistics confirm the expected results, since the number of homologous points varies only 0.3% from the use without transformation to the use of the general affine transformation and the mean and standard deviation are almost unchanged.
The important result to underline is that the positional accuracy of the OSM buildings of the analyzed area, statistically speaking, is at least compatible with the quality of a Regional Topographical Database at the scale of 1:5000, with an average deviation (with respect to the certificated points of the DBT) below the expected tolerance 2σ = 3.0 m.
Furthermore, analyzing the individual results in detail, we found a higher quality for some areas with respect to the average quality of the whole dataset. In particular, the cells 17, 29, 38, 39, 41, 42, and 48 have an average deviation in the distance between homologous points of less than 1.0 m and are therefore even compatible with a DBT at the scale of 1:2000 (the average deviation is respectively equal to 1.2, 0.8, 1.1, 1.2, 1.2, 0.2, and 0.1 m).
Through a visual analysis of the data, it was possible to find that in these cells different buildings of the OSM map were exactly identical to the homologous buildings represented in the DBT map. For these portions of territory the OSM mappers have most probably preferred to directly import (bulk importing) buildings from the DBT database, which is published with an open license, rather than digitizing them from scratch using other reference sources. The equality of buildings introduces distances exactly equal to 0.0 m between the homologous points and the statistics improved significantly in these areas.
Specific studies focused on methods for identifying bulk imports exist [68,69]. For our purposes, that was to inspect the massive import of several buildings directly from another source (i.e., the DBT map), it was however sufficient to exploit the OSM changeset information.
A changeset consists of a group of changes made by a single user over a short period of time. One changeset may for example include the additions of new elements to OSM, the addition of new tags to existing elements, changes to tag values of elements, deletion of tags, and also deletion of elements [70]. Changesets can be directly accessed using the following URL schema: https://www.openstreetmap.org/changeset/<Changeset number>. Another option is to use the query feature and select a feature which shows the feature details and the last changeset for it.
By analyzing this information cell by cell for a sample of identical buildings results in the two maps, it was possible to note that the OSM buildings were loaded with the same changeset in a very short period of time (in a few seconds) and therefore using an automated bulk import procedure.
However, this information was not sufficient to confirm that the source of the imported data was exactly the same as the DBT map. In order to verify this and to quantify for each cell the number of identical buildings present in both maps, a specific comparison procedure was carried out: we decided to consider two buildings to be identical if all the vertices have a distance less than a threshold of 0.1 m. In Figure 7a, the spatial distribution of the OSM buildings identical to the DBT buildings are reported and in Figure 7b the percentage values with respect to the total OSM buildings in each cell are reported.
The percentage of identical buildings for cells 17, 29, 38, 39, 41, 42, and 48 analytically confirms the previous hypothesis about the improved statistics in these areas.

5.3. Positional Accuracies on the Province Capitals

To confirm the results about the accuracy of the OSM map, another analysis was carried out by using a different approach in the subdivision of the dataset. Instead of splitting the region using an abstract geometric criterion in which each regular cell contains a significantly heterogeneous territory (highly urbanized areas, expanses of agricultural areas, inhabited mountainous areas, etc.), administrative boundaries were considered and the provincial capitals were analyzed for detecting the positional quality of OSM in these cities.
In Figure 8, the analyzed areas are reported together with a table containing the number of homologous points and the relative statistics for each city. In the table, the percentages of identical buildings measured in the two maps are also reported, and the high values found in cities of Lecco, Lodi and Pavia explain the high precision of the OSM and DBT map alignment for these three cities.
As a general comment, these results confirm those obtained in the previous test and allow us to compare the quality of the OSM map to that of a DBT map at scale 1:5000.
It is finally worth underlining that the OSM map is not fully compliant with the metric requirements of a DBT map since it is not guaranteed that 95% of the points have a tolerance lower than 2σ. The different acquisition techniques of OSM and DBT have however to be considered in order understand the origin of some errors and to give a correct interpretation of the results. In the case of the DBT, for example, the perimeter of the building on the ground is outlined in the worst cases by using stereoscopic images and in the best cases by a field topographic survey; conversely, in OSM orthophotos (often with roofs partially hiding the perimeter of the buildings on the ground) are used. DBT is a product of professionals; conversely, OSM is contributed by citizens. If we consider the value for money, OSM can be considered to be a good product for integrating into authoritative data, especially in zones where DBT lacks information.

5.4. Completeness

With respect to this completeness, our procedure can also be useful for evaluating the relative local and global territorial coverage of the two maps. In Figure 9, two examples of incomplete areas are shown. On the left, an area (labeled with the letter “A”) is shown where the buildings are only present in the DBT map; on the right, another area (labeled with the letter “B”) is shown where the buildings are only present in the OSM map. The results of the detection of isolated buildings on both maps are shown in Figure 10.
The percentages of buildings in the OSM maps without a corresponding building on the DBT map are shown on the left, while the percentage of buildings in the DBT map without a corresponding building on the DBT map are shown on the right.
The analysis of completeness, given in terms of the count of buildings appearing in the authoritative dataset but that are not present in OSM, shows an average percentage in the whole region equal to 57%. Conversely, the count of buildings appearing in the OSM map that are not present in the authoritative dataset, shows an average percentage in the whole region equal to 9%. These results highlight that the DBT map is more complete than the OSM map, but that there is still a part of DBT area not yet mapped, or that does not contain updates already present in the OSM map. It is important to highlight that, as previously explained, the two maps are updated asynchronously and at irregular intervals and with this proposed method, it is not automatically possible to distinguish incompleteness due to non-mapping from incompleteness due to non-updating.
Finally, it must be taken into account that in the very low-urbanized areas and in the boundary cells, the completeness percentages are statistically less significant because the amount of data is much lower than in the other cells. This is also one of the reasons for the variability in the local results.

5.5. Performance of the Assessment of Spatial Accuracy and Completeness

Due to the huge number of homologous points detected by the automatic search algorithm (about 3.8 million homologous points), both a systematic and a statistical validation of the results using a manual approach are impracticable. Even if the geometric controls used by the algorithm can already be considered to be a good guarantee of the correctness of the results, an automatic validation system is currently being studied in order to provide a tool to cross-validate the accuracy and the completeness of the assessment.
In the meantime, a first manual check of the results was applied by analyzing 30 randomly selected buildings (adding up to a total of 30 buildings × 38 cells = 1140 buildings) for each cell and by visually verifying for each of them the correctness and completeness of the homologous points. In the same way, the method used to compute the completeness of the maps was also verified, selecting 30 buildings for each cell automatically highlighted by the algorithm as “isolated” in the OSM map and 30 buildings automatically highlighted by the algorithm as “isolated” in the DBT map. The results of the manual check are reported in Table 2. “Wrong points” is the number of homologous points incorrectly identified by the algorithm (correctness index), while the “missing points” is the number of homologous points not detected by the algorithm but that a human operator would have identified (completeness index). For checking the completeness of the maps, both the numbers of buildings classified by the algorithm only in the OSM map and only in the DBT map that was checked are reported, as well as the total number of wrong classifications. The small percentages found for the errors prove that the method is reliable.

6. Conclusions

For several years, the base topographic maps have been used exclusively by administrative and governmental authorities and copyright protection was often justified by the high costs incurred for the creation and updating of the contents.
The advent of both VGI and the open-source philosophy has significantly contributed to the spread of a new type of geographic data, built with the voluntary contribution of the people and accessible for free without special licensing restrictions (e.g., ODbL [4] and CC BY-SA [5] license used by OSM).
For the official maps, there are well-defined production and updating techniques and this guarantees that the data has rigorous metric precision. For the data contributed by citizens and, in this specific case, for the OSM map, one of the problems still open is the control of its positional accuracy. This paper presents a possible external check, based on the comparison with certified authoritative data.
Test cases were carried out comparing the Topographic Data Base buildings of the Lombardy region with the OSM buildings, and some detailed statistics with respect to the assessment of spatial accuracy of the data were reported.
The work exploits an automatic search algorithm of homologous pairs between two different maps that allows us to significantly increase the volumes of compared data; this approach avoids human subjectivity in the selection of the features to compare and increases the data redundancy in the statistical estimation with respect to the limited number of control points that can (realistically) be manually checked.
Although the work requires further study and refinements, the first overall result on more than 3 million homologous points and about 940 thousand buildings in the OSM map and about 2.8 million buildings in the DBT map, allows us to say that the quality of the OSM buildings is comparable to that of the regional technical authoritative map at the scale of 1:5000. The OSM building map can therefore be considered to be a valid base map for both direct use (territorial frameworks, map navigation, urban analysis, etc.) and for derived use (background for the production of thematic maps) in all those cases in which a precision of 1:5000 is required. Moreover, it can be used for integration with the authoritative map at this scale (or greater) where it is not complete and rigorous quality certification in terms of metric precision is not required.
An improvement already planned for future work aims at solving a specific issue that the algorithm is not yet able to solve automatically. Since the two maps have inherent (and unavoidable) differences in their data creation and updating procedures for their features/buildings, the proposed methodology could incorrectly match already demolished buildings with new buildings roughly built at the same location. In order to avoid this false matching, a more sophisticated check must be introduced, taking into account not only the point compatibility, but also the compatibility of the whole building. However, it is important to highlight how these possible commission errors, at least for the examined case, will not affect the results presented in this paper. In fact, we automated the analysis of 2.8 million buildings and computed the statistics on 3.8 million homologous points, while in the Lombardy region, considering as an example the period of five years 2011–2015 [71], when about 21,000 buildings (both residential and non-residential) were built or expanded. As this value corresponds only to 0.8% of all buildings in Lombardy, even if all the vertices of these buildings were incorrectly classified by the algorithm as homologous points, the statistics would not be significantly changed.

Author Contributions

M.A.B. and G.Z. contributed to the design and implementation of the research, to the analysis of the results and to the writing of the manuscript. G.Z. wrote the code, while M.A.B. supervised the project.

Funding

This work was supported by URBAN-GEO BIG DATA, a Project of National Interest (PRIN) funded by the Italian Ministry of Education, University and Research (MIUR)—ID. 20159CNLW8.

Acknowledgments

The authors want to thank Lombardy Region and OpenStreetMap© contributors for making available as open their databases.

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. OpenStreetMap. Available online: https://www.openstreetmap.org (accessed on 25 April 2015).
  2. Haklay, M.; Weber, P. Openstreetmap: User-generated street maps. IEEE Pervasive Comput. 2008, 7, 12–18. [Google Scholar] [CrossRef]
  3. Mooney, P.; Minghini, M. A Review of OpenStreetMap Data. In Mapping and the Citizen Sensor; Foody, G., See, L., Fritz, S., Mooney, P., Olteanu-Raimond, A.-M., Fonte, C.C., Antoniou, V., Eds.; Ubiquity Press: London, UK, 2017; pp. 37–59. [Google Scholar] [Green Version]
  4. Open Data Commons Open Database License (OdbL). Available online: https://opendatacommons.org/licenses/odbl (accessed on 25 April 2018).
  5. Creative Commons, Attribution-ShareAlike 2.0 Generic (CC BY-SA 2.0). Available online: https://creativecommons.org/licenses/by-sa/2.0 (accessed on 25 April 2018).
  6. OSMstats, Statistics of the Free Wiki World Map. Available online: https://osmstats.neis-one.org (accessed on 25 April 2018).
  7. Stats—OpenStreetMap Wiki. Available online: https://wiki.openstreetmap.org/wiki/Stats (accessed on 25 April 2018).
  8. O’Reilly, T. What is Web 2.0: Design Patterns and Business Models for the Next Generation of Software. Available online: http://www.oreilly.com/pub/a/web2/archive/what-is-web-20.html (accessed on 25 April 2018).
  9. Haklay, M. Citizen Science and Volunteered Geographic Information—Overview and Typology of Participation. In Crowdsourcing Geographic Knowledge: Volunteered Geographic Information (VGI) in Theory and Practice; Sui, D.Z., Elwood, S., Goodchild, M.F., Eds.; Springer: Berlin, Germany, 2013; pp. 105–122. [Google Scholar]
  10. Goodchild, M.F. Citizens as sensors: The world of volunteered geography. GeoJournal 2007, 69, 211–221. [Google Scholar] [CrossRef]
  11. Levy, P. L’Intelligence Collective. Pour une Anthropologie du Cyberespace; La Découverte: Paris, France, 1994; ISBN 10 2707126934. [Google Scholar]
  12. Budhathoki, N.R.; Haythornthwaite, C. Motivation for Open Collaboration: Crowd and Community Models and the Case of OpenStreetMap. Am. Behav. Sci. 2012, 57, 548–575. [Google Scholar] [CrossRef]
  13. Map Compare. Available online: http://mc.bbbike.org/mc (accessed on 25 April 2018).
  14. Bing Maps. Available online: https://www.bing.com/maps (accessed on 25 April 2018).
  15. Google Maps. Available online: https://www.google.com/maps (accessed on 25 April 2018).
  16. HERE Maps. Available online: https://wego.here.com (accessed on 25 April 2018).
  17. Esri Maps. Available online: https://livingatlas.arcgis.com/en/ (accessed on 25 April 2018).
  18. Ma Visioneeuse. Available online: http://mavisionneuse.ign.fr/visio.html (accessed on 25 April 2018).
  19. OSM Inspector. Available online: http://tools.geofabrik.de/osmi (accessed on 25 April 2018).
  20. OpenStreetMap Taginfo. Available online: https://taginfo.openstreetmap.org/ (accessed on 25 April 2018).
  21. JOSM Validator—OpenStreetMap Wiki. Available online: http://wiki.openstreetmap.org/wiki/JOSM/ Validator (accessed on 25 April 2018).
  22. Osmose—OpenStreetMap Wiki. Available online: https://wiki.openstreetmap.org/wiki/Osmose (accessed on 25 April 2018).
  23. Keep Right—OpenStreetMap Wiki. Available online: https://wiki.openstreetmap.org/wiki/Keep_Right (accessed on 25 April 2018).
  24. Map Roulette. Available online: http://maproulette.org (accessed on 25 April 2018).
  25. DeepOSM. Available online: https://libraries.io/github/trailbehind/DeepOSM (accessed on 25 April 2018).
  26. Ali, A.L.; Sirilertworakul, N.; Zipf, A.; Mobasheri, A. Guided Classification System for Conceptual Overlapping Classes in OpenStreetMap. ISPRS Int. J. Geo-Inf. 2016, 5. [Google Scholar] [CrossRef]
  27. Fonte, C.C.; Antoniou, V.; Bastin, L.; Bayas, L.; See, L.; Vatseva, R. Assessing VGI data quality. In Mapping and the Citizen Sensor; Foody, G., See, L., Fritz, S., Mooney, P., Olteanu-Raimond, A.-M., Fonte, C.C., Antoniou, V., Eds.; Ubiquity Press: London, UK, 2017; pp. 137–164. [Google Scholar]
  28. Geographic Information—Data Quality. 2013. Available online: https://www.iso.org/standard/32575.html (accessed on 25 April 2018).
  29. Senaratne, H.; Mobasheri, A.; Loai Ali, A.; Capineri, C.; Haklay, M. A review of volunteered geographic information quality assessment methods. Int. J. Geogr. Inf. Sci. 2017, 31, 139–167. [Google Scholar] [CrossRef]
  30. Hecht, R.; Kunze, C.; Hahmann, S. Measuring completeness of building footprints in OpenStreetMap over space and time. ISPRS Int. J. Geo-Inf. 2013, 2, 1066–1091. [Google Scholar] [CrossRef]
  31. Fan, H.; Zipf, A.; Fu, Q.; Neis, P. Quality assessment for building footprints data on OpenStreetMap. Int. J. Geogr. Inf. Sci. 2014, 28, 700–719. [Google Scholar] [CrossRef]
  32. Brovelli, M.A.; Minghini, M.; Molinari, M.E.; Zamboni, G. Positional accuracy assessment of the OpenStreetMap buildings layer through automatic homologous pairs detection: The method and a case study. Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2016, 41, 615–620. [Google Scholar] [CrossRef]
  33. Yong, H.; Sungchul, Y.; Chillo, G.; Kiyun, Y.; Wenzhong, S. Line segment confidence region-based string matching method for map conflation. ISPRS J. Photogramm. Remote Sens. 2013, 78, 69–84. [Google Scholar] [CrossRef]
  34. Brovelli, M.A.; Zamboni, G. A step towards geographic interoperability: The automatic detection of maps homologous pairs. In Proceedings of the UDMS ’04, Chioggia, Italy, 27–29 October 2004. [Google Scholar]
  35. Brovelli, M.A.; Zamboni, G. Adaptive Transformation of Cartographic Bases by Means of Multiresolution Spline Interpolation. ISPRS Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2004, 35, 206–211. [Google Scholar]
  36. Antoniou, V.; Skopeliti, A. Measures and indicators of VGI quality: An overview. ISPRS Ann. Photogramm. Remote Sens. Spat. Inf. Sci. 2015, 2, 345–351. [Google Scholar] [CrossRef]
  37. Ather, A. A Quality Analysis of Openstreetmap Data. Master’s Thesis, University College of London, London, UK, 2009. [Google Scholar]
  38. Haklay, M.; Basiouka, S.; Antoniou, V.; Ather, A. How many volunteers does it take to map an area well? The validity of Linus’ Law to volunteered geographic information. Cartogr. J. 2010, 47, 315–322. [Google Scholar] [CrossRef]
  39. Koukoletsos, T.; Haklay, M.; Ellul, C. An automated method to assess Data Completeness and Positional Accuracy of OpenStreetMap. GeoComputation 2011, 3, 236–241. [Google Scholar]
  40. Goodchild, M.F.; Hunter, G.J. A simple positional accuracy measure for linear features. Int. J. Geogr. Inf. Sci. 1997, 11, 299–306. [Google Scholar] [CrossRef]
  41. Kounadi, O. Assessing the Quality of OpenStreetMap Data. Master’s Thesis, University College of London, London, UK, 2009. [Google Scholar]
  42. Ciepluch, B.; Jacok, R.; Mooney, P.; Winstanley, A.C. Comparison of the accuracy of OpenStreetMap for Ireland with Google Maps and Bing Maps. In Proceedings of the Ninth International Symposium on Spatial Accuracy Assessment in Natural Resources and Environmental Sciences, Leicester, UK, 20–23 July 2010; pp. 337–340. [Google Scholar]
  43. Koukoletsos, T.; Haklay, M.; Ellul, C. Assessing data completeness of VGI through an automated matching procedure for linear data. Trans. GIS 2012, 16, 477–498. [Google Scholar] [CrossRef]
  44. Zielstra, D.; Zipf, A. A comparative study of proprietary geodata and volunteered geographic information for Germany. In Proceedings of the 13th AGILE International Conference on Geographic Information Science 2010, Guimaraes, Portugal, 11–14 May 2010. [Google Scholar]
  45. Wang, M.; Li, Q.; Hu, Q.; Zhou, M. Quality Analysis of Open Street Map Data. ISPRS Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2013, 5, 155–158. [Google Scholar] [CrossRef]
  46. Siebritz, L.A.; Sithole, G. Assessing the Quality of OpenStreetMap Data in South Africa in Reference to National Mapping Standards. In Proceedings of the Second AfricaGEO Conference, Cape Town, South Africa, 1–3 July 2014. [Google Scholar]
  47. Graser, A.; Straub, M.; Dragaschnig, M. Towards an open source analysis toolbox for street network comparison: Indicators, tools and results of a comparison of OSM and the official Austrian reference graph. Trans. GIS 2014, 18, 510–526. [Google Scholar] [CrossRef]
  48. Al-Bakri, M.; Fairbairn, D. Assessing the accuracy of crowdsourced data and its integration with official spatial datasets. In Proceedings of the Ninth International Symposium on Spatial Accuracy Assessment in Natural Resources and Environmental Sciences, Leicester, UK, 20–23 July 2010; pp. 317–320. [Google Scholar]
  49. Helbich, M.; Amelunxen, C.; Neis, P. Comparative Spatial Analysis of Positional Accuracy of OpenStreetMap and Proprietary Geodata. In Proceedings of the Geoinformatics Forum, Salzburg, Austria, 3–6 July 2012. [Google Scholar]
  50. Antoniou, V. User Generated Spatial Content: An Analysis of the Phenomenon and Its Challenges for Mapping Agencies. Ph.D. Thesis, University College London (UCL), London, UK, 2011. [Google Scholar]
  51. Girres, J.F.; Touya, G. Quality assessment of the French OpenStreetMap dataset. Trans. GIS 2010, 14, 435–459. [Google Scholar] [CrossRef]
  52. Canavosio-Zuzelski, R.; Agouris, P.; Doucette, P. A Photogrammetric Approach for Assessing Positional Accuracy of OpenStreetMap© Roads. ISPRS Int. J. Geo-Inf. 2013, 2, 276–301. [Google Scholar] [CrossRef] [Green Version]
  53. Forghani, M.; Delavar, M.R. A Quality Study of the Open Street Map Dataset for Tehran. ISPRS Int. J. Geo-Inf. 2014, 3, 750–763. [Google Scholar] [CrossRef]
  54. Brovelli, M.A.; Minghini, M.; Molinari, M.E. An automated GRASS-based procedure to assess the geometrical accuracy of the OpenStreetMap Paris road network. ISPRS Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci. 2016, 41, 919–925. [Google Scholar] [CrossRef]
  55. Brovelli, M.A.; Minghini, M.; Molinari, M.; Mooney, P. Towards an automated comparison of OpenStreetMap with authoritative road datasets. Trans. GIS 2017, 21, 191–206. [Google Scholar] [CrossRef]
  56. OSM Roads Comparison. Available online: https://github.com/MoniaMolinari/ OSM-roads-comparison/ tree/master/GRASS-scripts (accessed on 25 April 2018).
  57. Goetz, M.; Zipf, A. OpenStreetMap in 3D—Detailed Insights on the Current Situation in Germany. In Proceedings of the 15th AGILE International Conference on Geographic Information Science, Avignon, France, 24–27 April 2012. [Google Scholar]
  58. Fram, C.; Chistopoulou, K.; Ellul, C. Assessing the quality of OpenStreetMap building data and searching for a proxy variable to estimate OSM building data completeness. In Proceedings of the 23rd GIS Research UK (GISRUK) Conference, Leeds, UK, 15–17 April 2015. [Google Scholar]
  59. Wikipedia—Ramer-Douglas-Peucker Algorithm. Available online: https://en.wikipedia.org/wiki/ Ramer-Douglas-Peucker_algorithm (accessed on 25 April 2018).
  60. Arkin, E.M.; Chew, L.P.; Huttenlocher, D.P.; Kedem, K.; Mitchell, J.S.B. An Efficiently Computable Metric for Comparing Polygonal Shapes. IEEE Trans. Pattern Anal. Mach. Intell. 1991, 13, 209–216. [Google Scholar] [CrossRef]
  61. Törnros, T.; Dorn, H.; Hahmann, S.; Zipf, A. Uncertainties of completeness measures in OpenStreetMap—A case study for buildings in a medium-sized German city. ISPRS Ann. Photogramm. Remote Sens. Spat. Inf. Sci. 2015, 2, 353–357. [Google Scholar] [CrossRef]
  62. Müller, F.; Iosifescu Enescu, I.; Hurni, L. Assessment and Visualization of OSM Building Footprint Quality. In Proceedings of the 27th International Cartographic Conference (ICC 2015), Rio de Janeiro, Brazil, 23–28 August 2015. [Google Scholar]
  63. Touya, G.; Antoniou, V.; Christophe, S.; Skopeliti, A. Production of Topographic Maps with VGI: Quality Management and Automation. In Mapping and the Citizen Sensor; Foody, G., See, L., Fritz, S., Mooney, P., Olteanu-Raimond, A.-M., Fonte, C.C., Antoniou, V., Eds.; Ubiquity Press: London, UK, 2017; pp. 137–164. [Google Scholar]
  64. Coleman, D.J.; Georgiadou, Y.; Labonté, J. Volunteered geographic information: The nature and motivation of producers. Int. J. Spat. Data Infrastruct. Res. 2009, 4, 332–358. [Google Scholar] [CrossRef]
  65. Touya, G.; Reimer, A. Inferring the scale of OpenStreetMap features. In OpenStreetMap in GIScience; Jokar Arsanjani, J., Zipf, A., Mooney, P., Helbich, M., Eds.; Springer International Publishing: Cham, Switzerland, 2015; pp. 81–99. ISBN 978-3-319-14280-7. [Google Scholar]
  66. Wikipedia—Divide and Conquer. Available online: https://en.wikipedia.org/wiki/Divide_and_conquer (accessed on 25 April 2015).
  67. OpenStreetMap Wiki. Available online: https://wiki.openstreetmap.org/wiki (accessed on 25 April 2018).
  68. Zielstra, D.; Hochmair, H.H.; Neis, P. Assessing the effect of data imports on the completeness of OpenStreetMap—A United States case study. Trans. GIS 2013, 17, 315–334. [Google Scholar] [CrossRef]
  69. Zielstra, D.; Hochmair, H.H.; Neis, P.; Tonini, F. Areal delineation of home regions from contribution and editing patterns in OpenStreetMap. ISPRS Int. J. Geo-Inf. 2014, 3, 1211–1233. [Google Scholar] [CrossRef]
  70. Changeset—OpenStreetMap Wiki. Available online: https://wiki.openstreetmap.org/wiki/Changeset (accessed on 25 April 2018).
  71. ASR Lombardia—Annuario Statistico Regionale. Available online: http:// www.asr-lombardia.it/ASR/regioni-italiane/costruzioni-opere-pubbliche-e-mercato-immobiliare/attivita-edilizia (accessed on 25 April 2018).
Figure 1. Example of homologous points on two different maps.
Figure 1. Example of homologous points on two different maps.
Ijgi 07 00289 g001
Figure 2. Homologous points detection algorithm.
Figure 2. Homologous points detection algorithm.
Ijgi 07 00289 g002
Figure 3. Examples of compatible/incompatible homologous points.
Figure 3. Examples of compatible/incompatible homologous points.
Ijgi 07 00289 g003
Figure 4. (a) The regular grid used to analyze the Lombardy region delimited by red line; (b) one example of the OSM map (up) and the DBT map (bottom) of the same place.
Figure 4. (a) The regular grid used to analyze the Lombardy region delimited by red line; (b) one example of the OSM map (up) and the DBT map (bottom) of the same place.
Ijgi 07 00289 g004
Figure 5. Homologous points detected without transformation in the search process. (a) Number and percentage of detected points with respect to the total number of OSM points; (b) mean (M) and standard deviation (S) in meters of the distance of the homologous points.
Figure 5. Homologous points detected without transformation in the search process. (a) Number and percentage of detected points with respect to the total number of OSM points; (b) mean (M) and standard deviation (S) in meters of the distance of the homologous points.
Ijgi 07 00289 g005
Figure 6. Homologous points detected using the general affine transformation in the search process. (a) Number and percentage of detected points with respect to the total number of OSM points; (b) Mean (M) and standard deviation (S) in meters of the distance of the homologous points.
Figure 6. Homologous points detected using the general affine transformation in the search process. (a) Number and percentage of detected points with respect to the total number of OSM points; (b) Mean (M) and standard deviation (S) in meters of the distance of the homologous points.
Ijgi 07 00289 g006
Figure 7. (a) OSM buildings identical to the DBT buildings; (b) percentage of identical buildings in each cell with respect to the total number of OSM buildings.
Figure 7. (a) OSM buildings identical to the DBT buildings; (b) percentage of identical buildings in each cell with respect to the total number of OSM buildings.
Ijgi 07 00289 g007
Figure 8. (a) Provincial capitals of the Lombardy region; (b) homologous points statistics for each capitals.
Figure 8. (a) Provincial capitals of the Lombardy region; (b) homologous points statistics for each capitals.
Ijgi 07 00289 g008
Figure 9. (a) Buildings only depicted in the DBT map; (b) buildings only depicted in the OSM map.
Figure 9. (a) Buildings only depicted in the DBT map; (b) buildings only depicted in the OSM map.
Ijgi 07 00289 g009
Figure 10. (a) Percentages of OSM buildings without a corresponding DBT building; (b) percentages of DBT buildings without a corresponding OSM building.
Figure 10. (a) Percentages of OSM buildings without a corresponding DBT building; (b) percentages of DBT buildings without a corresponding OSM building.
Ijgi 07 00289 g010
Table 1. Points distance statistics for the whole Lombardy region.
Table 1. Points distance statistics for the whole Lombardy region.
TransformationNumber of PointsM (m)S (m)Percentile (m)
20%40%60%80%85%90%95%100%
None3,790,0031.4601.3460.0200.8631.5552.5002.8673.3774.1976.000
Translation3,797,7521.4751.3690.0200.8681.5642.5182.8913.4094.2507.312
Conform3,799,2731.4781.3740.0200.8701.5652.5222.8953.4164.2607.729
General Affine3,800,3801.4801.3780.0200.8701.5672.5252.8993.4214.2699.533
Table 2. Validation of the assessment of spatial accuracy and completeness.
Table 2. Validation of the assessment of spatial accuracy and completeness.
Homologous Points CheckCompleteness Maps Check
Number of buildingsHomologous pointsWrong pointsMissing pointsNumber of buildingOnly in OSMOnly in DBTWrong classification
11405347172 (3%)269 (5%)11405705700 (0%)

Share and Cite

MDPI and ACS Style

Brovelli, M.A.; Zamboni, G. A New Method for the Assessment of Spatial Accuracy and Completeness of OpenStreetMap Building Footprints. ISPRS Int. J. Geo-Inf. 2018, 7, 289. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi7080289

AMA Style

Brovelli MA, Zamboni G. A New Method for the Assessment of Spatial Accuracy and Completeness of OpenStreetMap Building Footprints. ISPRS International Journal of Geo-Information. 2018; 7(8):289. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi7080289

Chicago/Turabian Style

Brovelli, Maria Antonia, and Giorgio Zamboni. 2018. "A New Method for the Assessment of Spatial Accuracy and Completeness of OpenStreetMap Building Footprints" ISPRS International Journal of Geo-Information 7, no. 8: 289. https://0-doi-org.brum.beds.ac.uk/10.3390/ijgi7080289

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop