Next Article in Journal
The Protocol and Feasibility Results of a Preliminary Instagram-Based Physical Activity Promotion Study
Previous Article in Journal
Differences in Contrast Reproduction between Electronic Devices for Visual Assessment: Clinical Implications
Review

The Promise of Turning Induced Deformation Process for Synthesizing Magnesium Based Materials with Superior Mechanical Response

Department of Mechanical Engineering, 9 Engineering Drive 1, National University of Singapore, Singapore 117575, Singapore
*
Author to whom correspondence should be addressed.
Academic Editor: Paolo Veronesi
Received: 25 August 2021 / Revised: 9 September 2021 / Accepted: 17 September 2021 / Published: 22 September 2021
In recent times, an alternative synthesis pathway involving severe plastic deformation for Mg-based materials has been explored involving the generation of turnings according to a set of machining parameters and cold compaction into billets followed by hot extrusion. This is known as the turning induced deformation (TID) method and has shown potential to alter the properties of resulting Mg-based materials for the better, not to mention economic benefits arising from this processing method. This work summarizes exploratory efforts involving this method for synthesis of Mg-based materials. The TID method resulted in overall superior properties compared to conventional processing methods, while two distinct parameters (high depth of cut and low cutting speed) were found to have significant positive influence on the final material properties, and as such are considered to be suitable basis on which further exploratory work in this field may be conducted. View Full-Text
Keywords: magnesium; turning; processing; strength; recycling; deformation magnesium; turning; processing; strength; recycling; deformation
Show Figures

Graphical abstract

MDPI and ACS Style

Johanes, M.; Gupta, M. The Promise of Turning Induced Deformation Process for Synthesizing Magnesium Based Materials with Superior Mechanical Response. Technologies 2021, 9, 69. https://0-doi-org.brum.beds.ac.uk/10.3390/technologies9040069

AMA Style

Johanes M, Gupta M. The Promise of Turning Induced Deformation Process for Synthesizing Magnesium Based Materials with Superior Mechanical Response. Technologies. 2021; 9(4):69. https://0-doi-org.brum.beds.ac.uk/10.3390/technologies9040069

Chicago/Turabian Style

Johanes, Michael, and Manoj Gupta. 2021. "The Promise of Turning Induced Deformation Process for Synthesizing Magnesium Based Materials with Superior Mechanical Response" Technologies 9, no. 4: 69. https://0-doi-org.brum.beds.ac.uk/10.3390/technologies9040069

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop