Separations, Volume 8, Issue 6 (June 2021) – 18 articles

Triacylglycerols (TAGs), as the main components of edible oils and animal fats, are responsible for the nutritional value, organoleptic features and technological properties of foods; each lipid matrix shows a unique TAG profile which can serve as fingerprint to ensure the quality and authenticity of food products. The high complexity of many foodstuffs often makes untargeted elucidation of TAG components a challenging task; thus, more efficient separation techniques may be mandatory. In this research, the TAG profile of a borage (Borago officinalis) seed oil was obtained by two-dimensional comprehensive liquid chromatography (LC×LC), by the coupling of silver thiolate and octadecylsilica monodisperse materials. A total 94 TAG compounds were identified by ion trap-time of flight detection, using atmospheric pressure ionization, with the degree of unsaturation varying from 0 to 9, and partition values ranging from 36 to 56. The group-type separation afforded by this analytical approach may be useful to quickly fingerprint TAG components of oil samples. Full article

In the Arctic zone, where up to 1024 × 1013 kg of organic matter is stored in permafrost-affected soils, soil organic matter consists of about 50% humic substances. Based on the analysis of the molecular composition of humic acids, we assessed the processes of accumulation of the key structural fragments, their transformations and the stabilization rates of carbon pools in soils in general. The landscape of the Lena River delta is the largest storage of stabilized organic matter in the Arctic. There is active accumulation and deposition of a significant amount of soil organic carbon from terrestrial ecosystems in a permafrost state. Under ongoing climate change, carbon emission fluxes into the atmosphere are estimated to be higher than the sequestration and storing of carbon compounds. Thus, investigation of soil organic matter stabilization mechanisms and rates is quite an urgent topic regarding polar soils. For study of molecular elemental composition, humic acids were separated from the soils of the Lena River delta. Key structural fragments of humic matter were identified and quantified by CP/MAS ¹³C NMR spectroscopy: carboxyl (–COOR); carbonyl (–C=O); CH^3–; CH^2–; CH-aliphatic; –C-OR alcohols, esters and carbohydrates; and the phenolic (Ar-OH), quinone (Ar = O) and aromatic (Ar–) groups as benchmark Cryosols of the Lena delta river terrestrial ecosystem. Under the conditions of thermodynamic evolutionary selection, during the change between the dry and wet seasons, up to 41% of aromatic and carboxyl fragments accumulated in humic acids. Data obtained showed that three main groups of carbon played the most important role in soil organic matter stabilization, namely C, H-alkyls ((CH₂)n/CH/C and CH₃), aromatic compounds (C-C/C-H, C-O) and an OCH group (OCH/OCq). The variations of these carbon species’ content in separated humics, with special reference to soil–permafrost organic profiles’ recalcitrance in the current environment, is discussed. Full article

A rapid, synchronized liquid chromatographic method was established for the estimation of hydrochlorothiazide (HCZ), amlodipine (AMD), olmesartan (OLM), telmisartan (TEL), and irbesartan (IRB) in binary and ternary coformulations using the same chromatographic conditions. Five analytes were separated on a Zorbax C18 column using isocratic elution with a mobile phase consisting of acetonitrile, methanol, and 20 mM phosphate buffer (pH 3.5) in a ratio of 45:20:35% v/v. The analytes were detected at a wavelength of 230 nm at ambient temperature. Furthermore, the proposed liquid chromatographic procedure was validated for linearity, precision, accuracy, stability, and robustness using an experimental design. Analytes were separated with good resolution within 3.5 min. Analytes showed good linearity in a concentration satisfactory to analyze the different ratios of these analytes in the formulations. Pareto charts showed that the flow rate and mobile phase composition have a significant effect on the peak area of analytes and hence need to be carefully controlled, however, the method is robust. Finally, the different formulations consisting of HCZ, AMD, OLM, TEL, and IRB in different ratios were analyzed with high accuracy using an optimized HPLC method and compared with reported methods. Furthermore, the reported HPLC procedure is simple, rapid, and accurate and therefore can used for regular quality control of binary and ternary formulations using the same stationary and mobile phase. Full article

A high level of uric acid may cause hyperuricemia, which further develops into gout, eventually leading to chronic kidney disease. However, the pathogenic mechanism remains largely unknown. To investigate the cause and block the transformation of hyperuricemia to related diseases, it is important to discover the alterations in protein levels between gout patients and non-gout individuals. To date, human blood plasma is still the predominant matrices for clinical analysis. Due to the high abundance, the proteins of plasma samples have strong shielding effects on low abundance proteins, thus, the information on low abundance protein expression is always masked, while the low abundance proteins of human plasma are often of great significance for the diagnosis and treatment of diseases. Therefore, it is very important to separate and analyze the plasma proteins. High-performance liquid chromatography (LC) tandem mass spectrometry (MS)-based proteomics has been developed as a powerful tool to investigate changes in the human plasma proteome. Here, we used LC-MS/MS to detect the differential proteins in the plasmas from simple gout patients, gout with kidney damage patients, and non-gout individuals. We identified 32 obviously differential proteins between non-gout and gout subjects and 10 differential proteins between simple gout and gout with kidney damage patients. These differential proteins were further analyzed to characterize their localization and functions. Additionally, the correlation analysis showed multiple relationships between the abnormal plasma proteins and clinical biochemical indexes, particularly for the immune-inflammatory response proteins. Furthermore, inflammation factors gelsolin (GSN) were confirmed. Our results offer a view of plasma proteins for studying biomarkers of gout patients. Full article

Comprehensive two-dimensional gas chromatography mass spectrometry (GC×GC-MS) is a powerful tool for the analysis of complex mixtures, and it is ideally suited to discovery studies where the entire sample is potentially of interest. Unfortunately, when unit mass resolution mass spectrometers are used, many detected compounds have spectra that do not match well with libraries. This could be due to the compound not being in the library, or the compound having a weak/nonexistent molecular ion cluster. While high-speed, high-resolution mass spectrometers, or ion sources with softer ionization than 70 eV electron impact (EI) may help with some of this, many GC×GC systems presently in use employ low-resolution mass spectrometers and 70 eV EI ionization. Scripting tools that apply filters to GC×GC-TOFMS data based on logical operations applied to spectral and/or retention data have been used previously for environmental and petroleum samples. This approach rapidly filters GC×GC-TOFMS peak tables (or raw data) and is available in software from multiple vendors. In this work, we present a series of scripts that have been developed to rapidly classify major groups of compounds that are of relevance to metabolomics studies including: fatty acid methyl esters, free fatty acids, aldehydes, alcohols, ketones, amino acids, and carbohydrates. Full article

Glutathione is a tripeptide natural product characterized by a non-canonical peptide bond with an amide moiety linking the nitrogen of cysteine to the γ-carboxyl of glutamate, and is found ubiquitously in nature, in animals, plants and microorganisms. One of the most abundant biological matrices is represented by erythrocytes, being glutathione the only sulfur-containing mechanism for the red blood cell oxidative protection. Several analytical methods for glutathione determination from different samples are described in the literature and most of these methods are based on the use of high-performance liquid chromatography. HPLC equipment is not available in all the biochemical laboratories, and, moreover, displays lot of economic and ecological limitations, including organic solvent consumption and time-consuming analysis. Here, an organic-free high-throughput fluorometric methodology for the analysis of total glutathione in erythrocytes is reported, avoiding the use of time-consuming and not-sustainable techniques. Full article

Lumnitzera littorea and Lumnitzera racemosa are mangrove species distributed widely along the Indonesian coasts. Besides their ecological importance, both are of interest owing to their wealth of natural products, some of which constitute potential sources for medicinal applications. We aimed to discover and characterize new anti-infective compounds, based on population-level sampling of both species from across the Indonesian Archipelago. Root metabolites were investigated by TLC, hyphenated LC-MS/MS and isolation, the internal transcribed spacer (ITS) region of rDNA was used for genetic characterization. Phytochemical characterization of both species revealed an unusual diversity in sulfated constituents with 3,3’,4’-tri-O-methyl-ellagic acid 4-sulfate representing the major compound in most samples. None of these compounds was previously reported for mangroves. Chemophenetic comparison of L. racemosa populations from different localities provided evolutionary information, as supported by molecular phylogenetic evidence. Samples of both species from particular locations exhibited anti-bacterial potential (Southern Nias Island and East Java against Gram-negative bacteria, Halmahera and Ternate Island against Gram-positive bacteria). In conclusion, Lumnitzera roots from natural mangrove stands represent a promising source for sulfated ellagic acid derivatives and further sulfur containing plant metabolites with potential human health benefits. Full article

A multiresidue analytical methodology based on a solid-phase microextraction (SPME), followed by gas chromatography-ion trap mass spectrometry (GC–IT/MS), has been developed for trace analysis of 20 known or suspected endocrine-disrupting pesticides. The SPME conditions are optimized considering several key parameters to obtain the maximum sensitivity. After the optimization, the method validation is performed, and the limits of detection (ranged from 2–150 ng/L) and the coefficient of determination (above 0.990) of studied compounds are determined for all the analytes. A robust sampling of twenty sampling points of surface water samples from the north and center of Portugal is performed, and the validated methodology is applied. In total, 20 compounds from four chemical families (13 organochlorine, 1 organophosphorus, 2 dicarboximide, and 4 pyrethroids) are studied, and the pesticides most frequently detected are eight organochlorine pesticides (α-, β-HCHs, lindane, HCB, o,p′-DDT, p,p′-DDE, p,p′-DDD, α-endosulfan), cypermethrin, and vinclozolin. Full article

Fermentation is a technology that enhances biologically active ingredients, improves the absorption rate and induces the generation of new functional ingredients by the catalytic action of enzyme systems possessed by microorganisms. In this study, changes in the content of five kinds of bioactive compounds (deacetylasperulosidic acid, asperulosidic acid, scopolin, asperuloside and scopoletin) of Morinda citrifolia L. were confirmed by fermentation, and a high-performance liquid chromatography-photodiode array (HPLC-PDA) analysis method for measuring analytes was developed and validated. HPLC method for the determination of five bioactive compounds in Morinda citrifolia L. extracts (MCE) was validated in terms of sensitivity, linearity, selectivity, limit of detection (LOD) and quantification (LOQ), precision and accuracy. The coefficient of determination of the calibration curve for bioactive compounds (1.56–100 μg/mL) showed linearity (R² ≥ 0.9999). LOD and LOQ were in the range 0.04–0.97 and 0.13–2.95 μg/mL, respectively. The range of intra- and intraday accuracies values (recovery) were 97.5–121.9% and 98.8–118.1%, respectively, and precision value (RSDs) of the bioactive compounds were <4%. In addition, changes in the content of five bioactive compounds in MCE by fermentation were confirmed. These results indicate that the developed fermentation and analysis method could be applied in the development of potential functional food ingredients. Full article

In view of the difficulty of traditional hydrocyclones to meet the requirements of fine classification, a double-overflow three-product (internal overflow, external overflow and underflow) hydrocyclone was designed in this study. Numerical simulation and experimental research methods were used to investigate the effects of double-overflow flow field characteristics and structural parameters (i.e., internal vortex finder diameter and insertion depth) on separation performance. The research results showed that the larger the diameter of the internal vortex finder, the greater the overflow yield and the larger the cut size. The finest internal overflow product can be obtained when the internal vortex finder is 30 mm longer than the external vortex finder. The separation efficiency is highest when the internal vortex finder is 30 mm shorter than the external vortex finder. Full article

An ever-increasing need exists within the forensic laboratories to develop analytical processes for the qualitative and quantitative determination of a broad spectrum of new psychoactive substances. Phenylethylamine derivatives are among the major classes of psychoactive substances available on the global market and include both amphetamine analogues and synthetic cathinones. In this work, an ultra-high-performance liquid chromatography-positive ion electrospray ionization tandem mass spectrometric method (UHPLC-ESI-MS/MS) has been developed and fully validated for the determination of 19 psychoactive substances, including nine amphetamine-type stimulants and 10 synthetic cathinone derivatives, in premortem and postmortem whole blood. The assay was based on the use of 1 mL premortem or postmortem whole blood, following solid phase extraction prior to the analysis. The separation was achieved on a Poroshell 120 EC-C18 analytical column with a gradient mobile phase of 0.1% formic acid in acetonitrile and 0.1% formic acid in water in 9 min. The dynamic multiple reaction monitoring used in this work allowed for limit of detection (LOD) and lower limit of quantitation (LOQ) values of 0.5 and 2 ng mL⁻¹, respectively, for all analytes both in premortem and postmortem whole blood samples. A quadratic calibration model was used for the 12 quantitative analytes over the concentration range of 20–2000 ng mL⁻¹, and the method was shown to be precise and accurate both in premortem and postmortem whole blood. The method was applied to the analysis of real cases and proved to be a valuable tool in forensic and clinical toxicology. Full article

Smokeless tobacco products and nicotine-containing tobacco-free oral pouches have increased in popularity in recent years. They are associated with far fewer health hazards compared to cigarettes. Nicotine pouches are filled with non-tobacco filler and nicotine. The nicotine used in nicotine pouches usually comes from the extraction of tobacco; thus, related alkaloids may be found as impurities at low levels. Moreover, nicotine degradation products are formed because of microbial action, flavor oxidation, exposure to high temperatures etc. Currently, there are no published or recommended methods for the analysis of nicotine degradants in nicotine pouches. Here, we present a sensitive and selective liquid chromatography–tandem mass spectrometry method for the simultaneous determination of seven nicotine-related impurities. All seven analytes and corresponding deuterated internal standards were separated within 3.5 min, including 1 min equilibration. The method was fully validated, showing good linearity with correlation coefficients >0.996 for all analytes, good extraction yields ranging from 78% to 110%, limits of detection between 0.08 and 0.56 µg/g and limits of quantification between 0.27 and 2.04 µg/g. Although the method was mainly developed to determine the degradants of nicotine in nicotine pouches, it was validated and performed well on a broader range of tobacco-containing products. Full article

In this study, we conducted the characterization and purification of the thermostable mannitol dehydrogenase (MtDH) from Caldicellulosiruptor hydrothermalis 108. Furthermore, a coupling-enzyme system was designed using (MtDH) from Caldicellulosiruptor hydrothermalis 108 and formate dehydrogenase (FDH) from Ogataea parapolymorpha. The biotransformation system was constructed using Escherichia coli whole cells. The purified enzyme native and subunit molecular masses were 76.7 and 38 kDa, respectively, demonstrating that the enzyme was a dimer. The purified and couple enzyme system results were as follows; the optimum pH for the reduction and the oxidation was 7.0 and 8.0, the optimum temperature was 60 °C, the enzyme activity was inhibited by EDTA and restored by zinc. Additionally, no activity was detected with NADPH and NADP. The purified enzyme showed high catalytic efficiency K_cat 385 s⁻¹, K_m 31.8 mM, and k_cat/K_m 12.1 mM⁻¹ s⁻¹ for D-fructose reduction. Moreover, the purified enzyme retained 80%, 75%, 60%, and 10% of its initial activity after 4 h at 55, 60, 65, and 75 °C, respectively. D-mannitol yield was achieved via HPLC. Escherichia coli are the efficient biotransformation mediator to produce D-mannitol (byproducts free) at high temperature and staple pH, resulting in a significant D-mannitol conversation (41 mg/mL) from 5% D-fructose. Full article

Artemisinin-based drugs are the most effective medicine against multidrug-resistant Plasmodium spp., the parasite that causes malaria. To this day, wormwood A. annua L. is the sole commercial source of artemisinin, where it is produced in minor amounts. The artemisinin yield depends on numerous poorly regulated agricultural factors and the genetic variability of this non-domesticated plant. This has aroused significant interest in the development of heterologous expression platforms for artemisinin production. Previously, we obtained lines of Chrysanthemum morifolium Ramat. (C. morifolium Ramat.), cvs. White Snowdon and Egyptianka, transformed with artemisinin biosynthesis genes. Here, we report the results of an analysis of artemisinin production in transgenic chrysanthemums. Transcription of heterologous amorpha-4,11-diene monooxygenase and cytochrome P450 reductase genes in transgenic lines was confirmed using high-resolution melting analysis. Artemisinin accumulation was detected using GC-MS in White Snowdon plants, but not in Egyptianka ones, thereby demonstrating the possibility of transplanting active artemisinin biosynthetic pathway into chrysanthemum. Ways of increasing its content in producer plants are discussed. Full article

The optimization of process parameters in the pharmaceutical industry is often carried out according to the Quality by Design (QbD) concept. QbD also emphasizes that continuous improvement should be performed in life cycle management. Process parameters that are difficult to control in actual production can be regarded as noise parameters. In this study, based on the QbD concept, the ethanol precipitation process of Carthami Flos extract was optimized, considering a noise parameter. The density of the concentrated extract, ethanol concentration, the volume ratio of ethanol to concentrated extract, stirring time after ethanol addition, and refrigeration temperature were selected as critical process parameters (CPPs), using a definitive screening design. The mathematical models among CPPs and evaluation indicators were established. Considering that the refrigeration temperature of industrial ethanol precipitation is often difficult to control with seasonal changes, refrigeration temperature was treated as a noise parameter. A calculation method for the design space in the presence of the noise parameter was proposed. The design space was calculated according to the probability of reaching the standards of evaluation indicators. Controlling parameters within the design space was expected to reduce the influence of noise parameter fluctuations on the quality of the ethanol precipitation supernatant. With more data obtained, the design space was updated. In industry, it is also recommended to adopt a similar idea: that is, continuing to collect industrial data and regularly updating mathematical models, which can further update the design space and make it more stable and reliable. Full article

Chiral stationary phases based on chicken alpha 1-acid glycoprotein (cAGP) have been used for enantioseparations of various compounds. However, the chiral binding sites and mechanism have not been clarified yet. Based on chromatographic properties of native and W26-modified cAGP columns and docking simulations of studied compounds into the generated model structure of cAGP, the chiral binding sites were located on cAGP and the chiral binding mechanism was discussed. On cAGP, there existed a binding cavity lined with H25, W26, Y47, R128, T129, D161 and E168, which contribute electrostatic or hydrogen bonding interactions. Benzoin and chlorpheniramine enantiomers interacted with cAGP at almost the same sites a little away from W26, while propranolol enantiomers docked, slightly shifting toward H25 and W26. Furthermore, in addition to hydrophobic interactions, ionic interactions between amino groups of chlorpheniramine enantiomers and a carboxyl group of D161 or E168 played an important role in the chiral recognition, while hydrophobic interactions and hydrogen bonding interactions worked for the chiral recognition of benzoin and propranolol enantiomers. Full article

Apatite is an important carrier of rare earth elements (REEs) and phosphorite is a potential REEs resource. However, the influence of hydrothermal fluids on the migration and enrichment of REE in apatite remains controversial. The experimental study of the interaction between REE-bearing fluid and apatite is one of the essential ways to understand the chemical behavior of rare earth elements in apatite. In this study, we conducted the fluid–mineral reaction experimental study (at 400 °C, 50 MPa and 4–16 wt %) between high lanthanum (La) content hydrothermal solution and low REE content to reveal the influence of different salinities on the diffusion of rare earth elements in fluorapatite. Based on in situ geochemical analyses of experimental products, we show that the diffusion coefficients of La in fluorapatite are between 3.24 × 10⁻¹⁵ and 5.88 × 10⁻¹⁵ m²/s. The salinity of the fluid has a great influence on the diffusion coefficient, with the increase of salinity, the diffusion coefficient increase. Full article

The effect of mineral dust in the air sucked in by an engine on accelerated component wear and reduction in performance was presented. The necessity to use two-stage air filters (multicyclone-paper insert) for military vehicles was shown. The results showed that placing an air filter in the path of the air entering the engine causes an additional pressure drop (air filter resistance increase), which leads to engine power decrease and increased fuel consumption. An analysis of model filter beds’ pressure drop changes (depending on bed parameters, aerosol flow parameters, and dust content) was carried out. It was revealed that it is very difficult to model changes in pressure drop in filter beds for actual conditions that appear during vehicle operation. The air filter pressure drop measurement results of more than 20 tracked vehicles operating in variable air dust concentration conditions were presented. The forms of selected regression models of the “life curve” type, best suited to the actual changes in air filters pressure drop as a function of the vehicle mileage, were determined. Significant differences were found between the same model values for different units of the tested vehicles. The quality of forecasting pressure drop value by selected functions was assessed by extrapolating them to the value of the next measurement and comparing the forecast and actual value. It was found that for the performed experiment, sufficiently good results of experimental data approximation and forecasting were obtained for a simple linear model. Full article