Next Article in Journal
Investigation into the Incorporation of Phosphate into BaCe1−yAyO3−y/2 (A = Y, Yb, In)
Next Article in Special Issue
Chemistry of Ammonothermal Synthesis
Previous Article in Journal / Special Issue
Synthesis of Diazonium Tetrachloroaurate(III) Precursors for Surface Grafting
Open AccessArticle

Bottom-Up, Wet Chemical Technique for the Continuous Synthesis of Inorganic Nanoparticles

Inorganic Chemistry, Saarland University, Am Markt Zeile 3, 66125 Saarbrücken, Germany
*
Author to whom correspondence should be addressed.
Received: 20 December 2013 / Revised: 14 January 2014 / Accepted: 16 January 2014 / Published: 27 January 2014
(This article belongs to the Special Issue Innovative Inorganic Synthesis)
Continuous wet chemical approaches for the production of inorganic nanoparticles are important for large scale production of nanoparticles. Here we describe a bottom-up, wet chemical method applying a microjet reactor. This technique allows the separation between nucleation and growth in a continuous reactor environment. Zinc oxide (ZnO), magnetite (Fe3O4), as well as brushite (CaHPO4·2H2O), particles with a small particle size distribution can be obtained continuously by using the rapid mixing of two precursor solutions and the fast removal of the nuclei from the reaction environment. The final particles were characterized by FT-IR, TGA, DLS, XRD and SEM techniques. Systematic studies on the influence of the different process parameters, such as flow rate and process temperature, show that the particle size can be influenced. Zinc oxide was obtained with particle sizes between 44 nm and 102 nm. The obtained magnetite particles have particle sizes in the range of 46 nm to 132 nm. Brushite behaves differently; the obtained particles were shaped like small plates with edge lengths between 100 nm and 500 nm. View Full-Text
Keywords: continuous synthesis; precipitation; inorganic nanoparticles; microjet reactor continuous synthesis; precipitation; inorganic nanoparticles; microjet reactor
Show Figures

Figure 1

MDPI and ACS Style

Betke, A.; Kickelbick, G. Bottom-Up, Wet Chemical Technique for the Continuous Synthesis of Inorganic Nanoparticles. Inorganics 2014, 2, 1-15. https://0-doi-org.brum.beds.ac.uk/10.3390/inorganics2010001

AMA Style

Betke A, Kickelbick G. Bottom-Up, Wet Chemical Technique for the Continuous Synthesis of Inorganic Nanoparticles. Inorganics. 2014; 2(1):1-15. https://0-doi-org.brum.beds.ac.uk/10.3390/inorganics2010001

Chicago/Turabian Style

Betke, Annika; Kickelbick, Guido. 2014. "Bottom-Up, Wet Chemical Technique for the Continuous Synthesis of Inorganic Nanoparticles" Inorganics 2, no. 1: 1-15. https://0-doi-org.brum.beds.ac.uk/10.3390/inorganics2010001

Find Other Styles

Article Access Map by Country/Region

1
Only visits after 24 November 2015 are recorded.
Search more from Scilit
 
Search
Back to TopTop