Biomimetics, Volume 7, Issue 1 (March 2022) – 33 articles

The health system can reap significant benefits by adopting and implementing innovative measures, as was recently demonstrated and emphasized during the COVID-19 pandemic. Herein, we present our bird’s eye view of gastroenterology’s innovative technologies via utilizing a text-mining technique. We analyzed five research fields that comply with innovation: artificial intelligence (AI), virtual reality (VR), telemedicine, the microbiome, and advanced endoscopy. According to gastroenterology literature, the two most innovative fields were the microbiome and advanced endoscopy. Though artificial intelligence (AI), virtual reality (VR), and telemedicine trailed behind, the number of AI publications in gastroenterology has shown an exponential trend in the last couple of years. While VR and telemedicine are neglected compared to other fields, their implementation could improve physician and patient training, patient access to care, cost reduction, and patient outcomes. Full article

Ten years ago, for the first time in humans, thanks to the DLMS (direct metal laser sintering) technique, we designed, built and inserted an immediate post-extraction custom-made root-analogue implant in Ti-6Al-4v with platform switching. The implant was inserted into the post-extraction socket, respecting the biological width. After 10 years, we wanted to evaluate the dimensional stability of the implant and the eventual crestal bone resorption. The evaluation was performed clinically with periodontal parameters and radiographically by means of an intraoral X-ray with the parallel technique measuring the distance between the base of the bone crest and the implant shoulder. It appears that the implant has maintained dimensional stability of the peri-implant soft tissues, and the crestal resorption is 0 mm. This could represent a step forward to make this experimental method a valid alternative to the current immediate post-extraction implant procedures in use. Full article

Fast movement of objects and illumination changes may lead to a negative effect on camera images for object detection and tracking. Event cameras are neuromorphic vision sensors that capture the vitality of a scene, mitigating data redundancy and latency. This paper proposes a new solution to moving object detection and tracking using an event frame from bio-inspired event cameras. First, an object detection method is designed using a combined event frame and a standard frame in which the detection is performed according to probability and color, respectively. Then, a detection-based object tracking method is proposed using an event frame and an improved kernel correlation filter to reduce missed detection. Further, a distance measurement method is developed using event frame-based tracking and similar triangle theory to enhance the estimation of distance between the object and camera. Experiment results demonstrate the effectiveness of the proposed methods for moving object detection and tracking. Full article

Consumption of acidic beverages and foods could provoke erosive damage, both for teeth and for restorative materials. Temperatures of consumption could influence the erosive effects of these products. The aim of this in vitro study is to assess the influence of an acidic challenge on the weight loss of different restorative materials. Resin composites and glass-ionomer cements (GIC) were tested. The medium of storage was Coca-Cola (Coca-Cola, Coca-Cola Company, Milano, Italy) at two different temperatures, 4 and 37 °C, respectively for Group A and Group B. For each group, nine specimens were prepared for each material tested. After 7 days, weight was assessed for each sample, and the percentage weight loss was calculated. For all the resin composites (Groups 1–13), no significant weight losses were noticed. (<1%). Conversely, GICs (Groups 14 and 15) showed significant weight loss during the acidic challenge, which was reduced in the case of these materials that included a protective layer applied above. Significant differences were registered with intra-group analysis; weight loss for specimens immersed in Coca Cola at 37 °C was significantly higher for almost all materials tested when compared to specimens exposed to a cooler medium. In conclusion, all the resin composites showed reliable behaviour when exposed to acidic erosion, whereas glass-ionomer cements generally tended to solubilize. Full article

Background: The relationship between utricle diseases and structural lesions is not very clear in the clinic due to the complexity and delicacy of the utricle structure. Therefore, it is necessary to study the perception mechanism of the utricle. Methods: Imitating the sensory cells in the macula of the utricle, a symmetrical metal core PVDF fiber (SMPF) was designed as a bionic hair sensor to fabricate a bionic macula (BM), a bionic macula with sand (BMS) and a bionic utricle (BU). Then experiments were carried out on them. Results: This indicated the SMPF sensor can sense its bending deformation, which was similar to the sensory cell. The amplitude of the output charges of the SMPF in BMS and BU were significantly improved. The SMPF, whose electrode boundary was perpendicular to the impact direction, exhibited the largest output charges. Conclusion: The presence of otoliths and endolymph can improve the sensing ability of the utricle. The human brain can judge the direction of head linear accelerations based on the location of the sensory cell in the macula that produces the largest nerve signals. This provides a possibility of studying utricle abnormal functions in vitro in the future. Full article

Metabolic pathways provide key information for achieving a better understanding of life and all its processes; this is useful information for the improvement of medicine, agronomy, pharmacy, and other similar areas. The main analysis tool used to study these pathways is based on pathway comparison, using graph data structures. Metabolic pathway comparison has been defined as a computationally complex task. In a previous work, two new algorithms were introduced to treat the problem of metabolic pathway pairwise comparison. Here we provide an extended analysis with more data and a deeper analysis of metabolic pathway comparison as listed in the discussion and results section. Full article

While the reversible attachment of artificial structures underwater has moved into the focus of many recent publications, the ability of organisms to walk on and attach to surfaces underwater remains almost unstudied. Here, we describe the behaviour of the water-lily leaf beetle Galerucella nymphaeae when it adheres to surfaces underwater and compare its attachment properties on hydrophilic and hydrophobic surfaces underwater and in the air. The beetles remained attached to horizontal leaves underwater for a few minutes and then detached. When the leaf was inclined, the beetles started to move upward immediately. There was no difference in the size of the tarsal air bubble visible beneath the beetles’ tarsi underwater, between a hydrophilic (54° contact angle of water) and a hydrophobic (99°) surface. The beetles gained the highest traction forces on a hydrophilic surface in the air, the lowest on a hydrophobic surface in air, and intermediate traction on both surfaces underwater. The forces measured on both surfaces underwater did not differ significantly. We discuss factors responsible for the observed effects and conclude that capillary forces on the tarsal air bubble might play a major role in the adhesion to the studied surfaces. Full article

Biomimicry education is grounded in a set of natural design principles common to every known lifeform on Earth. These Life’s Principles (LPs) (cc Biomimicry 3.8), provide guidelines for emulating sustainable strategies that are field-tested over nearly four billion years of evolution. This study evaluates an exercise for teaching LPs to interdisciplinary students at three universities, Arizona State University (ASU) in Phoenix, Arizona (USA), College of Charleston (CofC) in Charleston, South Carolina (USA) and The Hague University of Applied Sciences (THUAS) in The Hague (The Netherlands) during the spring 2021 semester. Students researched examples of both biological organisms and human designs exhibiting the LPs. We gauged the effectiveness of the exercise through a common rubric and a survey to discover ways to improve instruction and student understanding. Increased student success was found to be directly linked to introducing the LPs with illustrative examples, assigning an active search for examples as part of the exercise, and utilizing direct assessment feedback loops. Requiring students to highlight the specific terms of the LP sub-principles in each example is a suggested improvement to the instructions and rubric. An iterative, face-to-face, discussion-based teaching and learning approach helps overcome minor misunderstandings. Reiterating the LPs throughout the semester with opportunities for application will highlight the potential for incorporating LPs into students’ future sustainable design process. Full article

Architects throughout the ages have looked to nature for answers to complex questions about the most appropriate structural forms for their buildings. This is the case of Jørn Utzon and the design of roof shells of the Sydney Opera House, in which the search for natural references was constant, from the nautical references in the initial design phases to the final spherical solution based on the analogy with an orange. This paper analyzes the influence of nature as a source of inspiration in this World Heritage building, assessing through FEM calculation models the suitability of the different solutions proposed and weighing up the influence of certain factors such as scale in this type of process. Through the calculation models developed, it has been possible to verify the poor performance of the initial designs compared to the power of the final solution, which, after more than 5 years of research by the design team headed by Utzon, was able to solve the enormous problem with a “simple” typological and geometric change. Full article

Three-dimensional technologies are one of the most recent and relevant advancements in the field of Dentistry. These systems, including intraoral scans, 3D imaging exams (CAT scan, CBCT and MRI), CAD/CAM 3D printing devices and 3D computer software, have enabled clinicians to greatly improve patient care along with reducing treatment planning time. The present descriptive study aims to explore possible applications of 3D technologies during the diagnosis, treatment plan, case monitoring and result assessment in orthodontics. The overall upgrade provided by these technologies can improve the clinicians’ workflow and effectiveness by simplifying conventional techniques considered to be especially arduous. Full article

With the development of the biomimicry approach, new and creative ideas have been established to solve problems in architectural design. In the designs based on this process, “nature” is used as a diverse data source for the transfer of these data to various processes, functions, materials, and structures. The primary purpose of this paper is to explore the development of biomimicry as an architectural approach, with a bibliometric review of research related to biomimicry and energy efficiency. Emphasis on the importance of the need for biomimicry in modern designs is another goal of this study. In this study, articles published in the Web of Science database (2010–2021) were analyzed. VOSviewer and SankeyMATIC software were used to represent the analysis results graphically. According to the results of this study, in addition to the inadequacy of biomimicry research, the need for further research became apparent. This review can serve as a reference for future studies to transfer natural phenomena to architecture in order to solve the problem of efficient energy consumption. Full article

Since the invention of the aircraft, there has been a need for better surface design to enhance performance. This thirst has driven many aerodynamicists to develop various types of aerofoils. Most researchers have strongly assumed that smooth surfaces would be more suitable for air transport vehicles. This ideology was shattered into pieces when biomimetics was introduced. Biomimetics emphasized the roughness of a surface instead of smoothness in a fluid flow regime. In this research, the most popular 0012 aerofoils of the National Advisory Committee for Aeronautics (NACA) are considered to improve them, with the help of a surface pattern derived from the biological environment. Original and biomimetic aerofoils were designed in three dimensions with the help of Solidworks software and analyzed in the computational flow domain using the commercial code ANSYS Fluent. The implemented biomimetic rough surface pattern upgraded the NACA 0012 aerofoil design in the transonic flow regime. Lift and viscous forces of the aerofoil improved up to 5.41% and 9.98%, respectively. This research has proved that a surface with a little roughness is better than a smooth surface. Full article

Developing new barrier membranes with improved biomechanical characteristics has acquired much interest owing to their crucial role in the field of periodontal tissue regeneration. In this regard, we enriched the electrospun polycaprolactone (PCL)/gelatin (Gel) membranes by adding bioglass (BG) or Cu-doped bioglass (CuBG) and examined their cellular adhesion and proliferation potential in the presence of alveolar bone marrow-derived mesenchymal stem cells (aBMSCs). The membranes were fabricated and characterized using mechanical strength, SEM, FTIR, EDX, and ICP assay. Besides, aBMSCs were isolated, characterized, and seeded with a density of 35,000 cells in each experimental group. Next, the cellular morphology, cell adhesion capacity, proliferation rate, and membrane antibacterial activity were assessed. The results displayed a significant improvement in the wettability, pore size, and Young’s modulus of the PCL membrane following the incorporation of gelatin and CuBG particles. Moreover, all scaffolds exhibited reasonable biocompatibility and bioactivity in physiological conditions. Although the PCL/Gel/CuBG membrane revealed the lowest primary cell attachment, cells were grown properly and reached the confluent state after seven days. In conclusion, we found a reasonable level of attachment and proliferation of aBMSCs on all modified membranes. Meanwhile, a trace amount of Cu provided superiority for PCL/Gel/CuBG in periodontal tissue regeneration. Full article

This study attempted to investigate the effect of sandblasting and H₂O₂ treatments on the microshear bond strength of two commercially available resin cements. A total of 90 cube-shaped specimens of commercially pure titanium (cp-Ti) were divided into two groups of Panavia and MHA cements (n = 45). Samples of the Panavia group were randomly divided into three subgroups of 15 samples, including subgroups (no treatment, aluminum oxide sandblasting, and immersion in 35% hydrogen peroxide solution with halogen light). Once the treatment was completed, Panavia V5 was applied on the cp-Ti surface by a Tygon tube. The 45 specimens of the MHA cement group were randomly divided into three subgroups (n = 15) similarly to the Panavia group. Then, the MHA was applied on the surface of cp-Ti. A universal testing machine was used to measure and examine the microshear bond strength of cement to cp-Ti subsequent to the step of thermocycling. According to results, in the Panavia cement group, the SBS of sandblasting treatment was significantly higher than that of the H₂O₂ treatment subgroup (p < 0.05), which displayed a significantly higher SBS than that of the no-treatment subgroup (p < 0.001). In regard to the MHA group, the SBS of the H₂O₂ treatment subgroup was significantly lower than that of the sandblasting treatment subgroup (p < 0.001), whereas there were no significant differences between the SBS of the no treatment and H₂O₂ treatment subgroups (p = 0.35). Considering the comparison between Panavia and MHA cases, there were no significant differences observed among the no-treatment subgroups (p = 0.34), as well as the sandblasting treatment subgroups (p = 0.67), while the SBS of the H₂O₂ treatment subgroup in Panavia cement was higher than that of the H₂O₂ subgroup in MHA cement (p < 0.001). In conclusion, in both Panavia V5 and MHA cements, sandblasting treatment could improve the bond strength between the titanium surface. However, H₂O₂ treatment proved to be capable of enhancing the bond strength of Panavia V5 cement without causing any positive effects on the bond strength of MHA cement. Full article

Animal locomotion is influenced by a combination of constituent joint torques (e.g., due to limb inertia and passive viscoelasticity), which determine the necessary muscular response to move the limb. Across animal size-scales, the relative contributions of these constituent joint torques affect the muscular response in different ways. We used a multi-muscle biomechanical model to analyze how passive torque components change due to an animal’s size-scale during locomotion. By changing the size-scale of the model, we characterized emergent muscular responses at the hip as a result of the changing constituent torque profile. Specifically, we found that activation phases between extensor and flexor torques to be opposite between small and large sizes for the same kinematic motion. These results suggest general principles of how animal size affects neural control strategies. Our modeled torque profiles show a strong agreement with documented hindlimb torque during locomotion and can provide insights into the neural organization and muscle activation behavior of animals whose motion has not been extensively documented. Full article

Diabetes mellitus, a metabolic disease characterized by chronically elevated blood glucose levels, affects about 29 million Americans and more than 422 million adults all over the world. Particularly, type 2 diabetes mellitus (T2DM) accounts for 90–95% of the cases of vascular disease and its prevalence is increasing due to the rising obesity rates in modern societies. Although multiple factors associated with diabetes, such as reduced red blood cell (RBC) deformability, enhanced RBC aggregation and adhesion to the endothelium, as well as elevated blood viscosity are thought to contribute to the hemodynamic impairment and vascular occlusion, clinical or experimental studies cannot directly quantify the contributions of these factors to the abnormal hematology in T2DM. Recently, computational modeling has been employed to dissect the impacts of the aberrant biomechanics of diabetic RBCs and their adverse effects on microcirculation. In this review, we summarize the recent advances in the developments and applications of computational models in investigating the abnormal properties of diabetic blood from the cellular level to the vascular level. We expect that this review will motivate and steer the development of new models in this area and shift the attention of the community from conventional laboratory studies to combined experimental and computational investigations, aiming to provide new inspirations for the development of advanced tools to improve our understanding of the pathogenesis and pathology of T2DM. Full article

Urban growth has increased the risk of over-heating both in the microclimate and inside buildings, affecting thermal comfort and energy efficiency. That is why this research aims to evaluate the energy performance of buildings in terms of thermal comfort (operative temperature (OP) levels, satisfied hours of natural ventilation SHNV, thermal lag), and energy efficiency (roof heat gains and surface temperatures) in an urban area in Panama City, using superficial-heat-dissipation biomimetic strategies. Two case studies, a base case and a proposed case, were evaluated using the Designbuilder software through dynamic simulation. The proposed case is based on a combined biomimetic strategy; the reflective characteristics of the Saharan ant applied as a coating on the roofs through a segmented pattern such as the Zebra’s stripes (one section with coating, and another without). Results showed that the OP decreased from 8 to 10 °C for the entire urban zone throughout the year. A reduction of 3.13% corresponding to 8790 kWh per year was achieved for cooling energy consumption. A difference of 5 °C in external surface temperature was obtained, having a lower temperature in which the biomimetic strategy was applied. Besides, it was evidenced that a contrasted-reflectivity-stripes pitched roof performed better than a fully reflective roof. Thus, the functionality of Zebra stripes, together with the reflective characteristics of the Saharan ant, provide better performance for buildings’ thermal regulation and energy needs for cooling. Full article

Bioinspired self-shaping is an approach used to transform flat materials into unusual three-dimensional (3D) shapes by tailoring the internal architecture of the flat material. Bioinspiration and bioinspired materials have a high potential for fostering sustainable development, yet are often fashioned out of expensive and synthetic materials. In this work, we use bioinspiration to endow clay with self-shaping properties upon drying. The composites created are based on clay and starch, and the internal architecture is built using celery fibers. The viscosity, shrinkage, and bending of the architected composite monolayers are studied for several compositions by measuring penetration depth and using optical characterization methods. Bilayer structures inspired from plants are then processed using a simple hand layup process to achieve bending, twisting, and combinations of those after drying. By layering a mixture of 32 vol% clay, 25.8 vol% starch, and 42.2 vol% water with 40 wt% embedded aligned celery fibers, it is possible to obtain the desired shape change. The work presented here aims at providing a simple method for teaching the concept of bioinspiration, and for creating new materials using only clay and plant-based ingredients. Rejuvenating clay with endowed self-shaping properties could further expand its use. Furthermore, the materials, methods, and principles presented here are affordable, simple, largely applicable, and could be used for sustainable development in the domain of education as well as materials and structures. Full article

In this study, Cuprous Oxide (Cu₂O), known for its mechanism against bacteria, was used as filler to induce biocidal properties on a common commercial resin stereolithography (SLA) 3D printing resin. The aim was to develop nanocomposites suitable for the SLA process with a low-cost process that mimic host defense peptides (HDPs). Such materials have a huge economic and societal influence on the global technological war on illness and exploiting 3D printing characteristics is an additional asset for these materials. Their mechanical performance was also investigated with tensile, flexural, Charpy’s impact, and Vickers microhardness tests. Morphological analysis was performed through scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy-dispersive X-ray spectroscopy (EDS) analysis, while the thermal behavior was studied through Thermogravimetric Analysis (TGA). The antibacterial activity of the fabricated nanocomposites was investigated using a screening agar well diffusion method, for a gram-negative and a gram-positive bacterium. Three-dimensional printed nanocomposites exhibited antibacterial performance in all loadings studied, while their mechanical enhancement was approximately 20% even at low filler loadings, revealing a multi-functional performance and a potential of Cuprous Oxide implementation in SLA resin matrices for engineering and medical applications. Full article

In a previous paper, the authors dealt with the current showstoppers that inhibit commercial applicability of morphing systems. In this work, the authors express a critical vision of the current status of the proposed architectures and the needs that should be accomplished to make them viable for installation onboard of commercial aircraft. The distinction is essential because military and civil issues and necessities are very different, and both the solutions and difficulties to be overcome are widely diverse. Yet, still remaining in the civil segment, there can be other differences, depending on the size of the aircraft, from large jets to commuters or general aviation, which are classifiable in tourism, acrobatic, ultralight, and so on, each with their own peculiarities. Therefore, the paper aims to trace a common technology denominator, if possible, and envisage a future perspective of actual applications. Full article

Here we demonstrate the possibility of using acyclic diethylacetal of acetaldehyde (ADA) with low cytotoxicity for the fabrication of hydrogels via Schiff bases formation between chitosan and acetaldehyde generated in situ from acetals in chitosan acetate solution. This approach is more convenient than a direct reaction between chitosan and acetaldehyde due to the better commercial availability and higher boiling point of the acetals. Rheological data confirmed the formation of intermolecular bonds in chitosan solution after the addition of acetaldehyde diethyl acetal at an equimolar NH₂: acetal ratio. The chemical structure of the reaction products was determined using elemental analysis and ¹³C NMR and FT-IR spectroscopy. The formed chitosan-acetylimine underwent further irreversible redox transformations yielding a mechanically stable hydrogel insoluble in a broad pH range. The reported reaction is an example of when an inappropriate selection of acid type for chitosan dissolution prevents hydrogel formation. Full article

The granular media friction pad (GMFP) inspired by the biological smooth attachment pads of cockroaches and grasshoppers employs passive jamming, to create high friction forces on a large variety of substrates. The granular medium inside the pad is encased by a flexible membrane which at contact formation greatly adapts to the substrate profile. Upon applying load, the granular medium undergoes the jamming transition and changes from fluid-like to solid-like properties. The jammed granular medium, in combination with the deformation of the encasing elastic membrane, results in high friction forces on a multitude of substrate topographies. Here we explore the effect of elasticity variation on the generation of friction by varying granular media filling quantity as well as membrane modulus and thickness. We systematically investigate contact area and robustness against substrate contamination, and we also determine friction coefficients for various loading forces and substrates. Depending on the substrate topography and loading forces, a low filling quantity and a thin, elastic membrane can be favorable, in order to generate the highest friction forces. Full article

Metals, such as silver, gold, and copper are known for their biocidal properties, mimicking the host defense peptides (HDPs) of the immune system. Developing materials with such properties has great importance in medicine, especially when combined with 3D printing technology, which is an additional asset for various applications. In this work, copper nanoparticles were used as filler in stereolithography (SLA) ultraviolet (UV) cured commercial resin to induce such biocidal properties in the material. The nanocomposites developed featured enhanced mechanical responses when compared with the neat material. The prepared nanocomposites were employed to manufacture specimens with the SLA process, to be tested for their mechanical response according to international standards. The process followed was evaluated with Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), energy-dispersive X-ray spectroscopy (EDS), and thermogravimetric analysis (TGA). The antibacterial activity of the fabricated nanocomposites was evaluated using the agar-well diffusion method. Results showed enhanced mechanical performance of approximately 33.7% in the tensile tests for the nanocomposites filled with 1.0 wt.%. ratios, when compared to the neat matrix material, while this loading showed sufficient antibacterial performance when compared to lower filler loadings, providing an added value for the fabrication of effective nanocomposites in medical applications with the SLA process. Full article

The hypothesis of the present research is that by altering the substrate topography and/or stiffness to make it biomimetic, we can modulate cells behavior. Substrates with similar surface chemistry and varying stiffnesses and topographies were prepared. Bulk PCL and CNTs-reinforced PCL composites were manufactured by solvent casting method and electrospinning and further processed to obtain tunable moduli of elasticity in the range of few MPa. To ensure the same chemical profile for the substrates, a protein coating was added. Substrate topography and properties were investigated. Further on, the feedback of Wharton’s Jelly Umbilical Cord Mesenchymal Stem Cells to substrates characteristics was investigated. Solvent casting scaffolds displayed superior mechanical properties compared to the corresponding electrospun films. However, the biomimetic fibrous texture of the electrospun substrates induced improved feedback of the cells with respect to their viability and proliferation. Cells’ adhesion and differentiation was remarkably pronounced on solvent casting substrates compared to the electrospun substrates. Soft substates improved cells multiplication and migration, while stiff substrates induced differentiation into bone cells. Aspects related to the key factors and the ideal properties of substrates and microenvironments were clarified, aiming towards the deep understanding of the required optimum biomimetic features of biomaterials. Full article

Although this is an era of pandemics and many devastating diseases, this is also a time when bionanotechnology flourishes, illuminating a multidisciplinary field where vaccines are quickly becoming a balsam and a prevention against insidious plagues. In this work, we tried to gain and also give a deeper understanding on nanovaccines and their way of acting to prevent or cure cancer, infectious diseases, and diseases caused by parasites. Major nanoadjuvants and nanovaccines are temptatively exemplified trying to contextualize our own work and its relative importance to the field. The main properties for novel adjuvants seem to be the nanosize, the cationic character, and the biocompatibility, even if it is achieved in a low dose-dependent manner. Full article

Saliva production by salivary glands play a crucial role in oral health. The loss of salivary gland function could lead to xerostomia, a condition also known as dry mouth. Significant reduction in saliva production could lead to further complications such as difficulty in speech, mastication, and increased susceptibility to dental caries and oral infections and diseases. While some palliative treatments are available for xerostomia, there are no curative treatments to date. This study explores the use of Egg White Alginate (EWA), as an alternative scaffold to Matrigel^® for culturing 3D salivary gland cells. A protocol for an optimized EWA was established by comparing cell viability using 1%, 2%, and 3% alginate solution. The normal salivary simian virus 40-immortalized acinar cell (NS-SV-AC) and the submandibular gland-human-1 (SMG-hu-1) cell lines were also used to compare the spheroid formation and cell viability properties of both scaffold biomaterials; cell viability was observed over 10 days using a Live–Dead Cell Assay. Cell viability and spheroid size in 2% EWA was significantly greater than 1% and 3%. It is evident that EWA can support salivary cell survivability as well as form larger spheroids when compared to cells grown in Matrigel^®. However, further investigations are necessary as it is unclear if cultured cells were proliferating or aggregating. Full article

In this study, we prepared and evaluated hydroxyapatite–gelatin/curcumin nanofibrous composites and determined their antimicrobial effects against Escherichia coli, Staphylococcus aureus, and Streptococcus mutans. Hydroxyapatite–gelatin/curcumin nanofibrous composites were prepared by the electrospinning method. The prepared nanocomposites were then subjected to physicochemical studies by the light scattering method for their particle size, Fourier transmission infrared spectroscopy (FTIR) to identify their functional groups, X-ray diffraction (XRD) to study their crystallinity, and scanning electron microscopy (SEM) to study their morphology. For the microbial evaluation of nanocomposites, the disk diffusion method was used against Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the nanofibers were uniform in shape without any bead (structural defects). The release pattern of curcumin from the nanocomposite was a two-stage release, 60% of which was released in the first two days and the rest being slowly released until the 14th day. The results of the microbial evaluations showed that the nanocomposites had significant antimicrobial effects against all bacteria (p = 0.0086). It seems that these nanocomposites can be used in dental tissue engineering or as other dental materials. Also, according to the appropriate microbial results, these plant antimicrobials can be used instead of chemical antimicrobials, or along with them, to reduce bacterial resistance. Full article