Next Article in Journal
Dual-Input Photovoltaic System Based on Parallel Z-Source Inverters
Previous Article in Journal
The Effects of Structural Breaks on Energy Resources in the Long Run. Evidence from the Last Two Oil Price Crashes before COVID-19
Open AccessArticle

The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids

by 1 and 2,3,4,*
1
Department of Biomedical Engineering and Mechanical Engineering, Michigan Technological University, Houghton, MI 49931, USA
2
Department of Materials Science & Engineering, Michigan Technological University, Houghton, MI 49931, USA
3
Department of Electrical & Computer Engineering, Michigan Technological University, Houghton, MI 49931, USA
4
Department of Electronics and Nanoengineering, School of Electrical Engineering, Aalto University, FI-00076 Espoo, Finland
*
Author to whom correspondence should be addressed.
Received: 31 October 2020 / Revised: 23 November 2020 / Accepted: 25 November 2020 / Published: 29 November 2020
While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed in detail for their economic viability considering printing and assembly costs with purchased components and compared to equivalent or inferior commercial products available on Amazon. The results show current open-source 3-D printers are capable of manufacturing useful learning aids and that doing so provides high economic savings in the classroom. Overall, the average learning aid would save teachers 86% when fabricating it themselves. The results show that the average design evaluated was downloaded over 1,500 times and the average savings per year per open-source learning aid design was USD 11,822. To date, the 38 learning aid designs evaluated in this study saved over USD 45,000 each and the total of all of them saved the international educational community over USD 1.7 million. It is clear that investing in the development of open-source learning aids for students provides a return on investment (ROI) for investors hoping to improve education, on average, of more than 100%. View Full-Text
Keywords: learning aid; distributed manufacturing; 3-D printing; economics; open source; digital designs; 3-D printing; teaching tools; education aid; open-source designs learning aid; distributed manufacturing; 3-D printing; economics; open source; digital designs; 3-D printing; teaching tools; education aid; open-source designs
Show Figures

Graphical abstract

MDPI and ACS Style

Gallup, N.; Pearce, J.M. The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids. Designs 2020, 4, 50. https://0-doi-org.brum.beds.ac.uk/10.3390/designs4040050

AMA Style

Gallup N, Pearce JM. The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids. Designs. 2020; 4(4):50. https://0-doi-org.brum.beds.ac.uk/10.3390/designs4040050

Chicago/Turabian Style

Gallup, Nicole; Pearce, Joshua M. 2020. "The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids" Designs 4, no. 4: 50. https://0-doi-org.brum.beds.ac.uk/10.3390/designs4040050

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop