applsci-logo

Journal Browser

Journal Browser

Optical Design and Engineering

A topical collection in Applied Sciences (ISSN 2076-3417). This collection belongs to the section "Optics and Lasers".

Viewed by 132558

Editors

Department of Mechanical Engineering, National Chung Cheng University, 62102 ChiaYi, Taiwan
Interests: intelligence biomedical photoelectric; photoelectric semiconductor materials and device; artificial intelligence, intelligence green energy; optical design, opto-mechatronics integrated design; patent layout and analysis
Special Issues, Collections and Topics in MDPI journals
Graduate Institute of Precision Engineering, National Chung Hsing University, Taichung, Taiwan
Interests: photoelectric engineering; computational physics and nonlinear systems; micro-optical system design
Department of Electronic Engineering, National United University, Miaoli, Taiwan
Interests: semiconductor thin film components; electronic ceramics; optical instrument measuring equipment
Department of Mechanical and Automation Engineering, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
Interests: optical design; optical testing; opto-mechatronics system; human vision; Silicon photonic
Special Issues, Collections and Topics in MDPI journals

Topical Collection Information

Dear Colleagues,

It is a great pleasure, and an honor, to present this Topical Collection of Applied Sciences.

This is a feature issue to present recent advances and future prospects of this key, fundamental, research area in (1) optical design and engineering of semiconductor device, (2) optical measuring equipment and (3) optical exposure equipment.

You are cordially invited to submit your original research or review papers to this Topical Collection. All papers need to present original, previously-unpublished work and will be subject to the normal standards and peer-review processes of this journal.

Potential topics include, but are not limited to:

  • Optical materials;
  • Non-imaging optical design;
  • Imaging optical design;
  • Optical lens design;
  • Solid state lighting;
  • Thin-film technology;
  • Optical instruments;
  • Opto-mechanical system;
  • Optical exposure equipment;
  • Imaging systems, image processing, and display optical systems;
  • Optical devices, photonic devices, sensors, and detectors.

Prof. Dr. Zhi-Ting Ye
Prof. Dr. Pin Han
Prof. Dr. Chun Hung Lai
Prof. Dr. Yi Chin Fang
Collection Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the collection website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Optical materials
  • Non-imaging optical design
  • Imaging optical design
  • Optical lens design
  • Solid state lighting
  • Thin-film technology
  • Optical instruments
  • Opto-mechanical system
  • Optical exposure equipment
  • Imaging systems, image processing, and display optical systems
  • Optical devices, photonic devices, sensors, and detectors.

Published Papers (54 papers)

2024

Jump to: 2023, 2022, 2021, 2020, 2019

19 pages, 4871 KiB  
Article
Design of Parabolic Off-Axis Reflector Optical System for Large Aperture Single Star Simulators
by Tianyu Gao, Gaofei Sun, Guoyu Zhang, Zongyu Du, Qiang Liu, Qian Deng, Siwen Chen and Jierui Zhang
Appl. Sci. 2024, 14(5), 1926; https://0-doi-org.brum.beds.ac.uk/10.3390/app14051926 - 27 Feb 2024
Viewed by 390
Abstract
This study proposes a parabolic off-axis reflective optical system design method to reduce the wave aberration of the optical system of a large aperture single star simulator and improve the optical system’s imaging quality. Firstly, we determined the design indexes of the optical [...] Read more.
This study proposes a parabolic off-axis reflective optical system design method to reduce the wave aberration of the optical system of a large aperture single star simulator and improve the optical system’s imaging quality. Firstly, we determined the design indexes of the optical system of the large aperture single star simulator by analyzing the technical indexes of the star sensitizer and the development status of the single star simulator; secondly, the initial structural parameters of the optical system were calculated based on the theory of primary aberration; then, we carried out the design optimization of the optical system, the image quality evaluation, and the tolerance analysis using Zemax software; finally, the study tested the wave aberration of the optical system by using the four-dimensional interferometer and the standard mirror together. The simulation results of the optical system are as follows: in the entire field of view, the aberration of the optical system is far less than 0.002%, the modulation transfer function (MTF) reaches the diffraction limit, and the maximum wave aberration is 0.0324 λ. The experimental results are as follows: the maximum wave aberration of the optical system is 0.0337 λ, which is less than 1/25 λ, and it meets the requirements of the index. The simulation and experimental results show that the optical system of the large aperture single star simulator designed by this method has good imaging quality and a simple system structure. Full article
Show Figures

Figure 1

2023

Jump to: 2024, 2022, 2021, 2020, 2019

12 pages, 1627 KiB  
Article
Problem of Measuring Absorption Using Time-Resolved Photothermal Common-Path Interferometry under Conditions of Developed Heat Diffusion
by Ksenia Vlasova, Alexandre Makarov and Nikolai Andreev
Appl. Sci. 2024, 14(1), 190; https://0-doi-org.brum.beds.ac.uk/10.3390/app14010190 - 25 Dec 2023
Viewed by 517
Abstract
We present a study of the problem of measuring ultra-low absorption in quartz materials using the time-resolved photothermal common-path interferometry (TPCI) method, which we proposed and elaborated, with allowance for developed heat diffusion in the samples. This task is related to the implementation [...] Read more.
We present a study of the problem of measuring ultra-low absorption in quartz materials using the time-resolved photothermal common-path interferometry (TPCI) method, which we proposed and elaborated, with allowance for developed heat diffusion in the samples. This task is related to the implementation of one of the ways of increasing the sensitivity of measurements, namely, increasing the energy of the heating pulse by increasing its duration. Analytical formulas for the time dependence of the power of the time-varying component of the probe radiation are obtained in the Gaussian approximation for the laser beams. A correction factor that takes into account the heat diffusion effect is calculated theoretically and used during calibration. The rate at which the power of the time-varying component decreases when the sample is cooled after the end of the heating pulse is calculated. When measuring in crystalline quartz, quartz glass, and also in air, the calculated rate coincided with the experimental one, which is additional evidence for the reliability of the calculations of the correction factor for calibrating the measurements. When the duration of the heating pulse is increased to 5 ms, the calculated sensitivity of the scheme for measuring absorption in quartz glasses is 2 × 10−9 cm−1. Full article
Show Figures

Figure 1

21 pages, 6743 KiB  
Article
Dynamic Spectrum Assignment in Passive Optical Networks Based on Optical Integrated Microring Resonators Using Machine Learning and a Routing, Modulation Level, and Spectrum Assignment Method
by Andrés F. Calvo-Salcedo, Neil Guerrero González and Jose A. Jaramillo-Villegas
Appl. Sci. 2023, 13(24), 13294; https://0-doi-org.brum.beds.ac.uk/10.3390/app132413294 - 15 Dec 2023
Viewed by 894
Abstract
The rising demand for bandwidth in optical communication networks has led to the need for more efficient solutions for spectrum allocation. This article presents a solution to enhance the capacity and efficiency of passive optical networks (PON) using optical microring resonators and dynamic [...] Read more.
The rising demand for bandwidth in optical communication networks has led to the need for more efficient solutions for spectrum allocation. This article presents a solution to enhance the capacity and efficiency of passive optical networks (PON) using optical microring resonators and dynamic spectrum allocation. The solution relies on wavelength division multiplexing (WDM). It proposes using a support vector machine (SVM) and a Routing, Modulation Level, and Spectrum Assignment (RMLSA) method to manage spectrum allocation based on the bandwidth and distance of multiple requests. The network employs a pulse shaper to physically allocate the spectrum, allowing for the separation of the spectrum generated by the microring resonators into different wavelengths or wavelength ranges (super-channel). Additionally, the SVM and RMLSA algorithms regulate the pulse shaper to execute the allocation. This photonic network achieves improved spectrum utilization and reduces the network blocking probability. Our proposal shows that we successfully addressed 1090 requests with a zero blocking probability, accounting for 81% of the total requests. These request scenarios can simultaneously accommodate up to 200 requests, with a maximum bandwidth of 31 THz. This highlights the efficacy of our approach in efficiently managing requests with substantial processing capacity. Full article
Show Figures

Figure 1

12 pages, 5001 KiB  
Article
Computational Imaging at the Infrared Beamline of the Australian Synchrotron Using the Lucy–Richardson–Rosen Algorithm
by Soon Hock Ng, Vijayakumar Anand, Molong Han, Daniel Smith, Jovan Maksimovic, Tomas Katkus, Annaleise Klein, Keith Bambery, Mark J. Tobin, Jitraporn Vongsvivut and Saulius Juodkazis
Appl. Sci. 2023, 13(23), 12948; https://0-doi-org.brum.beds.ac.uk/10.3390/app132312948 - 04 Dec 2023
Viewed by 600
Abstract
The Fourier transform infrared microspectroscopy (FTIRm) system of the Australian Synchrotron has a unique optical configuration with a peculiar beam profile consisting of two parallel lines. The beam is tightly focused using a 36× Schwarzschild objective to a point on the sample and [...] Read more.
The Fourier transform infrared microspectroscopy (FTIRm) system of the Australian Synchrotron has a unique optical configuration with a peculiar beam profile consisting of two parallel lines. The beam is tightly focused using a 36× Schwarzschild objective to a point on the sample and the sample is scanned pixel by pixel to record an image of a single plane using a single pixel mercury cadmium telluride detector. A computational stitching procedure is used to obtain a 2D image of the sample. However, if the imaging condition is not satisfied, then the recorded object’s information is distorted. Unlike commonly observed blurring, the case with a Schwarzschild objective is unique, with a donut like intensity distribution with three distinct lobes. Consequently, commonly used deblurring methods are not efficient for image reconstruction. In this study, we have applied a recently developed computational reconstruction method called the Lucy–Richardson–Rosen algorithm (LRRA) in the online FTIRm system for the first time. The method involves two steps: training step and imaging step. In the training step, the point spread function (PSF) library is recorded by temporal summation of intensity patterns obtained by scanning the pinhole in the x-y directions across the path of the beam using the single pixel detector along the z direction. In the imaging step, the process is repeated for a complicated object along only a single plane. This new technique is named coded aperture scanning holography. Different types of samples, such as two pinholes; a number 3 USAF object; a cross shaped object on a barium fluoride substrate; and a silk sample are used for the demonstration of both image recovery and 3D imaging applications. Full article
Show Figures

Figure 1

19 pages, 7129 KiB  
Article
Study on Two-Dimensional Exit Pupil Expansion for Diffractive Waveguide Based on Holographic Volume Grating
by Mianhui Weng, Yizhao Wang, Xuechang Ren and Qinghong Lu
Appl. Sci. 2023, 13(21), 11858; https://0-doi-org.brum.beds.ac.uk/10.3390/app132111858 - 30 Oct 2023
Viewed by 972
Abstract
Diffraction gratings are becoming a preferred option for waveguide head-mounted in–out coupling devices due to their flexible optical properties and small size and light weight. At present, diffraction waveguide coupling devices for AR head-mounted displays (HMD) have difficulties such as a long development [...] Read more.
Diffraction gratings are becoming a preferred option for waveguide head-mounted in–out coupling devices due to their flexible optical properties and small size and light weight. At present, diffraction waveguide coupling devices for AR head-mounted displays (HMD) have difficulties such as a long development cycle and complicated processing. In this paper, we first establish a set of two-dimensional (2D) grating ray tracing models, based on which we determine the initial architecture of the dual-region two-dimensional exit pupil expansion (2D-EPE) AR-HMD holographic waveguide diffraction system. Second, we propose a honeycomb coupled grating array and optimize the optical energy utilization and brightness uniformity of the holographic waveguide and use a custom dynamic linked library (DLL) function to implement the ray tracing of the 2D grating and add a probabilistic splitting function to the DLL, which reduces the single simulation time from 11.853 min to 1.77 min. We also propose a holographic lithography device composed of holographic optical elements (HOEs) and a method for preparing HOEs. Finally, in order to obtain the diffraction efficiency preoptimized by the above DLL for the uniformity of the exit pupil brightness and light energy utilization, we inverse design with the preparation process parameters as the optimization variables and develop the adaptable electromagnetic calculation program Holo-RCWA. Using Holo-RCWA with nondominated sorting genetic algorithm II (NSGA-II), we inverse design to obtain the process parameters satisfying the diffraction efficiency distribution, and the optimization time of the whole system is reduced from 2–3 days to 10 h. This work is of great significance for AR/VR applications. Full article
Show Figures

Figure 1

11 pages, 6341 KiB  
Article
High-Power, High-Purity HG0n Hermite–Gaussian Laser Beam Generation in Cascaded Large Aspect Ratio Slabs
by Tianli Yang, Jing Yang, Wangzhe Zhou, Xuepeng Li, Yinan Zhou, Zongzhe Zhang and Xiaojun Wang
Appl. Sci. 2023, 13(19), 11062; https://0-doi-org.brum.beds.ac.uk/10.3390/app131911062 - 08 Oct 2023
Viewed by 545
Abstract
High-power, high-purity, nanosecond (ns) one-dimensional HG0n laser beams are proposed and demonstrated by using Nd:YAG cascaded slabs with a large aspect ratio. The HG0n laser beams are generated by adjusting the pump distribution, the intracavity apertures, and the tilt [...] Read more.
High-power, high-purity, nanosecond (ns) one-dimensional HG0n laser beams are proposed and demonstrated by using Nd:YAG cascaded slabs with a large aspect ratio. The HG0n laser beams are generated by adjusting the pump distribution, the intracavity apertures, and the tilt angle of the output coupler (OC). By controlling the gain and loss of HG0n modes of different orders, the high-purity, one-dimensional, high-order HG0n laser beams with orders 1 to 9 (HG01 to HG09) are produced, and their beam quality factors M2 align well with the theoretical predictions. Meanwhile, the large aspect ratio slab provides an ideal amplifier for the strip-shaped HG0n laser beams, and further power scaling is achieved by seeding the generated HG0n laser beams into an amplifier with an identical slab module. For the HG09 mode, the average power is amplified from 289 mW to 4.73 W with 294 ns pulse width, corresponding to a peak power of 32 kW. Moreover, above 5 W average power is achieved for all HG01 to HG08 modes. Hopefully, this scheme provides a solution for high-power and high-purity HG0n laser beam generation based on the slab-shaped configuration. Full article
Show Figures

Figure 1

16 pages, 5165 KiB  
Article
Near-Infrared Spectral Analysis for Assessing Germination Rate of Rapeseed Seeds: An Applied Sciences Approach
by Shuaiyang Zhang, Chengxu Lv, Cheng Cui, Jizhong Wang, Jingzhu Wu and Wenhua Mao
Appl. Sci. 2023, 13(19), 11001; https://0-doi-org.brum.beds.ac.uk/10.3390/app131911001 - 06 Oct 2023
Cited by 1 | Viewed by 745
Abstract
Brassica rapa, commonly known as the rapeseed plant, is globally recognized for its nutrient-rich composition and oil-packed seeds, earning its distinction as a substantial oil-seed crop. The seed quality, particularly the germination rate, is instrumental in guaranteeing a high-yield rapeseed crop. Given [...] Read more.
Brassica rapa, commonly known as the rapeseed plant, is globally recognized for its nutrient-rich composition and oil-packed seeds, earning its distinction as a substantial oil-seed crop. The seed quality, particularly the germination rate, is instrumental in guaranteeing a high-yield rapeseed crop. Given this, the accurate, quantitative determination and selection of germination rates in seed batches prior to sowing is of paramount importance. However, conventional germination tests, employed to determine the average germination rate of seed batches, are marred by substantial time and cost inefficiencies. This study proposes the use of near-infrared spectral analysis as a proficient, non-invasive approach for assessing germination rates in rapeseed seed batches. The research involved artificial aging of seeds procured from a variety of rapeseed strains, resulting in 228 batches with a broad germination rate spectrum of 15.73% to 99.13%. We recorded near-infrared diffuse reflectance spectra and applied a range of strategies for spectral data preprocessing and feature variable selection. Furthermore, we leveraged support vector regression (SVR) modeling to augment the detection methodology. SVR training and detection were conducted using MATLAB, with selected feature wavelengths undergoing rigorous scrutiny and discussion. The results indicated that employing Savitzky–Golay convolution smoothing for spectral preprocessing, along with Synergy interval Partial Least Squares (SiPLS) in conjunction with Random Frog (RF) for the selection of 50 feature wavelength points, yielded optimal germination rate prediction performance within the SVR model. The coefficients of determination (R2c) for the training set and (R2p) for the testing set were observed to be 0.8559 and 0.8386, respectively, while the Root Mean Square Errors of Calibration (RMSEC) and Prediction (RMSEP) were calculated to be 13.76% and 17.04%. The mechanism of detecting seed vigor through near-infrared spectroscopy was analyzed based on joint variable screening and sensitive variable traceability. Consequently, the SG–SiPLS–RF–SVR model demonstrates its effectiveness in predicting the average germination rate of seed batches, offering a rapid, non-invasive detection method that can be universally applied to various rapeseed strains, thus significantly improving seed production efficiency. Full article
Show Figures

Figure 1

13 pages, 3981 KiB  
Article
Spectra Prediction for WLEDs with High TLCI
by Haiyang Wang, Peipei Wang, Zhiliang Jin, Yang Song and Daxi Xiong
Appl. Sci. 2023, 13(14), 8487; https://0-doi-org.brum.beds.ac.uk/10.3390/app13148487 - 22 Jul 2023
Viewed by 935
Abstract
White light-emitting diodes (WLEDs) with a high television lighting consistency index (TLCI) are becoming popular in stadium, studio, and stage lighting, but they are hard to empirically manufacture because they exploit the response of a camera rather than that of the human eye. [...] Read more.
White light-emitting diodes (WLEDs) with a high television lighting consistency index (TLCI) are becoming popular in stadium, studio, and stage lighting, but they are hard to empirically manufacture because they exploit the response of a camera rather than that of the human eye. In this study, blue chips with green and red phosphors were used to build high-TLCI WLEDs, and a spectral prediction model for WLEDs used for calculating the TLCI was established. The model considers the reabsorption and re-emission of phosphors and spectral shift. To validate the model, WLEDs with a TLCI greater than 90, from 3000 K to 7000 K, were predicted and packaged. The maximum difference in the TLCI between the measured and predicted model values is approximately 1.93%. The spectral prediction model proposed in this study is expected to provide a helpful guideline for building high-TLCI WLEDs. Full article
Show Figures

Figure 1

13 pages, 10277 KiB  
Article
Phase Mask Design Based on an Improved Particle Swarm Optimization Algorithm for Depth of Field Extension
by Zeyu Huang, Fei Li, Lina Zhu, Guo Ye and Tingyu Zhao
Appl. Sci. 2023, 13(13), 7899; https://0-doi-org.brum.beds.ac.uk/10.3390/app13137899 - 05 Jul 2023
Cited by 3 | Viewed by 840
Abstract
Phase mask optimization is one of the critical steps in designing a wavefront coding system to extend the depth of field (DoF). As a classical phase mask, a cubic phase mask was taken as an example. An improved particle swarm optimization (PSO) algorithm [...] Read more.
Phase mask optimization is one of the critical steps in designing a wavefront coding system to extend the depth of field (DoF). As a classical phase mask, a cubic phase mask was taken as an example. An improved particle swarm optimization (PSO) algorithm was applied to calculate the parameters of the cubic phase mask by introducing the modulation transfer function as the optimization criterion and a threshold as a constraint. The quality of the subsequent image restoration is guaranteed on the premise of the extended DoF. Finally, the improved PSO was proved to be faster, more efficient, and more accurate compared to the simulated annealing algorithm and the traditional PSO. The experimental results verify that the cubic phase mask optimized by the improved PSO can achieve DoF extension in the wavefront coding system. The improved PSO can also be applied to other phase masks of wavefront coding systems. Full article
Show Figures

Figure 1

17 pages, 6731 KiB  
Article
Breadboard of Microchip Laser and Avalanche Photodiode in Geiger and Linear Mode for LiDAR Applications
by Ana de Sousa, Rafael Pinto, Bruno Couto, Beltran Nadal, Hugo Onderwater, Paulo Gordo, Manuel Abreu, Rui Melicio and Patrick Michel
Appl. Sci. 2023, 13(9), 5631; https://0-doi-org.brum.beds.ac.uk/10.3390/app13095631 - 03 May 2023
Viewed by 1593
Abstract
This paper reports the implementation of two critical technologies used in light detection and ranging for space applications: (1) a microchip Q-switched laser breadboard; (2) a breadboard of an indium gallium arsenide avalanche photodiode working at 292 K with high reverse polarization voltages. [...] Read more.
This paper reports the implementation of two critical technologies used in light detection and ranging for space applications: (1) a microchip Q-switched laser breadboard; (2) a breadboard of an indium gallium arsenide avalanche photodiode working at 292 K with high reverse polarization voltages. Microchip Q-switched lasers are small solid-state back-pumped lasers that can generate high-energy short pulses. The implemented breadboard used an erbium and ytterbium co-doped phosphate glass, a Co:Spinel crystal with 98% initial transparency, and an output coupler with 98% reflectivity. For the sensor test, a system for simultaneous operation in vacuum and a wide range of temperatures was developed. Avalanche photodiodes are reverse-polarized photodiodes with high internal gain due to their multiple layer composition, capable of building up high values of photocurrent from small optical signals by exploiting the avalanche breakdown effects. The test avalanche photodetector was assembled to be operated in two modes: linear and Geiger mode. The produced photocurrent was measured by using: (1) a passive quenching circuit; (2) a transimpedance amplifier circuit. These two technologies are important for mobile light detection and ranging applications due to their low mass and high efficiencies. The paper describes the breadboard’s implementation methods and sensor characterization at low and room temperatures with high bias voltages (beyond breakdown voltage). Full article
Show Figures

Figure 1

6 pages, 1666 KiB  
Communication
A Compact Self-Injection-Locked Narrow-Linewidth Diode Laser with Narrowband Dielectric Filter
by Pengfei Fan, Peng Xu, Hua-Ying Liu, Minghao Shang, Zhenda Xie and Shining Zhu
Appl. Sci. 2023, 13(8), 4765; https://0-doi-org.brum.beds.ac.uk/10.3390/app13084765 - 10 Apr 2023
Viewed by 1455
Abstract
The self-injection-locked diode laser can significantly reduce the linewidth down to a sub-100 kHz level but requires optical filtering that is much narrower than the laser cavity linewidth. Such optical filtering is usually sophisticated and beyond the capability of the normal dielectric coating [...] Read more.
The self-injection-locked diode laser can significantly reduce the linewidth down to a sub-100 kHz level but requires optical filtering that is much narrower than the laser cavity linewidth. Such optical filtering is usually sophisticated and beyond the capability of the normal dielectric coating approach. Here we develop a 0.16 nm narrowband dielectric coating using a Fabry–Perot dielectric filter (HFFPF) for the narrow linewidth self-injection-locked laser demonstration using a cost-effective Fabry–Perot laser diode. Single-longitude-mode output is achieved, with beat linewidth down to ~66 kHz and a high side mode suppression ratio over 60 dB. This setup of self-injection-locked laser is cost-effective for mass production and thus is suitable for various applications such as laser ranging, LIDAR, optical communication, and holographic. Full article
Show Figures

Figure 1

2022

Jump to: 2024, 2023, 2021, 2020, 2019

12 pages, 2860 KiB  
Article
Geometric Method: A Novel, Fast and Accurate Solution for the Inverse Problem in Risley Prisms
by Juan Domingo Sandoval, Keyla Delgado, David Fariña, Fernando de la Puente, Roberto Esper-Chaín and Marrero Martín
Appl. Sci. 2022, 12(21), 11087; https://0-doi-org.brum.beds.ac.uk/10.3390/app122111087 - 01 Nov 2022
Cited by 1 | Viewed by 1716
Abstract
Today, mechanical tracking systems are becoming increasingly compact, enabling a new range of civil and military applications. These include aerial laser scanning, for which Risley prisms are used. In Risley systems, the so-called inverse problem, which focuses on obtaining the angles of the [...] Read more.
Today, mechanical tracking systems are becoming increasingly compact, enabling a new range of civil and military applications. These include aerial laser scanning, for which Risley prisms are used. In Risley systems, the so-called inverse problem, which focuses on obtaining the angles of the prisms for a given target coordinate, has not yet been solved mathematically. As a consequence, approximate approaches have been used, but the solutions obtained have significant errors and a lack of precision. To improve accuracy, iterative methods, which are computationally intensive, have also been implemented. In this paper, an analytical process which we call the geometric method is presented, and we verified that this strategy highly improves accuracy and computational speed. Using this method in an iterative process gives accuracies of up to 1 pm in only three iterations. This high accuracy would allow the geometric method to be applied in fields such as lithography, stereolithography, or 3D printing. Full article
Show Figures

Figure 1

15 pages, 2814 KiB  
Article
Wave Aberration Correction for an Unobscured Off-Axis Three-Mirror Astronomical Telescope Using an Aberration Field Compensation Mechanism
by Jinxin Wang, Xu He, Xiaohui Zhang, Mingze Ma and Zhirui Cao
Appl. Sci. 2022, 12(21), 10716; https://0-doi-org.brum.beds.ac.uk/10.3390/app122110716 - 22 Oct 2022
Cited by 1 | Viewed by 1328
Abstract
Studying how to use the coupling characteristics of net aberration fields induced by different perturbation parameters to realize the wave aberration compensation correction of perturbed telescopes is of great significance for the development of active optics. Based on nodal aberration theory, this paper [...] Read more.
Studying how to use the coupling characteristics of net aberration fields induced by different perturbation parameters to realize the wave aberration compensation correction of perturbed telescopes is of great significance for the development of active optics. Based on nodal aberration theory, this paper studies the wave aberration compensation correction method of an unobscured off-axis three-mirror telescope. Specifically, first of all, it theoretically analyzes the coupling effects and compensation relationships of net aberration fields induced by different perturbation parameters of the telescope. Furthermore, it establishes wave aberration correction models with the secondary mirror as the compensator and the third mirror as the compensator for the telescope, respectively. In the end, it verifies the two compensation correction models by simulations. The results show that the tolerance of the secondary mirror compensation correction mode (SMCM) to the perturbation parameter threshold is significantly better than that of the third mirror compensation correction model (TMCM). When the introduced perturbation parameter threshold is small, the correction accuracy of the two models for the wave aberrations is equivalent, and both reach the order of 103λ (RMS, λ = 632.8 nm). When the perturbation parameter threshold is increased, the correction accuracy of SMCM can still be maintained at the order of 103λ but the correction accuracy of TMCM would decrease by an order of magnitude. Full article
Show Figures

Figure 1

15 pages, 8972 KiB  
Article
Equivalent Modeling and Verification of a High-Steepness and Lightweight Elliptical Aluminum Mirror
by Shuanglong Tan, Xin Zhang, Lingjie Wang, Hongbo Wu, Qiang Fu, Lei Yan and Mingyu Hu
Appl. Sci. 2022, 12(18), 9091; https://0-doi-org.brum.beds.ac.uk/10.3390/app12189091 - 09 Sep 2022
Cited by 3 | Viewed by 1212
Abstract
In order to realize the compact layout of aerospace payloads, the design and manufacture of high-steepness lightweight aluminum alloy mirrors is a key technology to be explored. For high-steepness mirrors, the traditional method is to establish the initial thickness that satisfies the bending [...] Read more.
In order to realize the compact layout of aerospace payloads, the design and manufacture of high-steepness lightweight aluminum alloy mirrors is a key technology to be explored. For high-steepness mirrors, the traditional method is to establish the initial thickness that satisfies the bending stiffness through finite element optimization iteration, which cannot achieve fast modeling and performance estimation. In this paper, firstly, the equivalent modeling method of the mirror with high steepness is proposed to achieve the equivalent of the elliptic mirror with a diameter of 410 × 310 mm and F# less than 0.7. Based on the mathematical model, topology shape optimization was used to build a highly lightweight mirror structure that could be quickly assembled, and the equivalent area–mass density of the mirror is less than 34 kg/mm2. Next, the rationality of design feasibility was verified by simulation analysis. Finally, by using single point diamond turning combined with post polishing process, the high-precision manufacturing of conventional aluminum alloy mirror was realized. The results show that the mirror shape accuracy is 1/10 λ (λ = 632.8 nm), and the surface roughness Ra is 3.342 nm. This research provides strong theoretical support and application prospects for the low-cost and rapid manufacturing of high-steepness lightweight aluminum alloy mirrors. Full article
Show Figures

Figure 1

18 pages, 3259 KiB  
Article
Optimization Method for Low Tilt Sensitivity of Secondary Mirror Based on the Nodal Aberration Theory
by Jing Li, Yalin Ding, Yiming Cai, Guoqin Yuan and Mingqiang Zhang
Appl. Sci. 2022, 12(13), 6514; https://0-doi-org.brum.beds.ac.uk/10.3390/app12136514 - 27 Jun 2022
Cited by 1 | Viewed by 1221
Abstract
The optical system that combines imaging and image motion compensation is conducive to the miniaturization of aerial mapping cameras, but the movement of optical element for image motion compensation will cause a decrease in image quality. To solve this problem, reducing the sensitivity [...] Read more.
The optical system that combines imaging and image motion compensation is conducive to the miniaturization of aerial mapping cameras, but the movement of optical element for image motion compensation will cause a decrease in image quality. To solve this problem, reducing the sensitivity of moving optical element is one of the effective ways to ensure the imaging quality of aerial mapping cameras. Therefore, this paper proposes an optimization method for the low tilt sensitivity of the secondary mirror based on the Nodal aberration theory. In this method, the analytical expressions of the tilt sensitivity of the secondary mirror in different tilt directions are given in the form of zernike polynomial coefficients, and the influence of the field of view on the sensitivity is expressed in the mathematical model. The desensitization optimization function and desensitization optimization method are proposed. The catadioptric optical system with a focal length of 350 mm is used for desensitization optimization. The results show that the desensitization function proposed in this paper is linearly related to the decrease of sensitivity within a certain range, and the standard deviation of the system after desensitization is 0.020, which is 59% of the system without desensitization. Compared with the traditional method, the method in this paper widens the range of angle reduction sensitivity and has a better desensitization effect. The research results show that the optimization method for low tilt sensitivity of the secondary mirror based on the Nodal aberration theory proposed in this paper reduces the tilt sensitivity of the secondary mirror, revealing that the reduction of the sensitivity depends on the reduction of the aberration coefficient related to the misalignment in the field of view, which is critical for the development of an optical system for aerial mapping cameras that combines imaging and image motion compensation. Full article
Show Figures

Figure 1

10 pages, 2460 KiB  
Article
Development of Radiator with Thermoplastic Polymer and Insert-Molded Aluminum Alloy Parts for Light-Emitting Diode Headlights
by Yenlung Chen, Juikun Chang, Chun Huang, Changche Chiu, Wei Lai, Zhiting Ye and Pin Han
Appl. Sci. 2022, 12(11), 5385; https://0-doi-org.brum.beds.ac.uk/10.3390/app12115385 - 26 May 2022
Cited by 1 | Viewed by 1633
Abstract
The increasing popularity of electric vehicles has increased the demand for lightweight auto parts. However, the excessive weight of traditional metal heat sinks has remained a concern. Metal has excellent thermal conductivity but low radiation efficiency. Conversely, thermoplastic polymers have excellent heat radiation [...] Read more.
The increasing popularity of electric vehicles has increased the demand for lightweight auto parts. However, the excessive weight of traditional metal heat sinks has remained a concern. Metal has excellent thermal conductivity but low radiation efficiency. Conversely, thermoplastic polymers have excellent heat radiation efficiency but poor thermal conductivity. In this study, we propose a radiator constructed using thermoplastic polymer and insert-molded aluminum alloy parts to maintain the low junction temperature of light-emitting diodes (LEDs); the radiator’s weight is reduced through a combination of aluminum alloy and a thermally conductive polymer designed for automotive headlights. At an LED thermal load of 11.48 W, the measured temperature on the LED pad is 60.8 °C. The weight of the proposed radiator is 23.37% lighter than that of a pure metal radiator. When the lightweight radiator is used in high-power LED headlights, it effectively dissipates heat within a limited space. Full article
Show Figures

Graphical abstract

13 pages, 4208 KiB  
Article
Calibration of Rotary Encoders Using a Shift-Angle Method
by Tsung-Han Hsieh, Tsukasa Watanabe and Po-Er Hsu
Appl. Sci. 2022, 12(10), 5008; https://0-doi-org.brum.beds.ac.uk/10.3390/app12105008 - 16 May 2022
Cited by 6 | Viewed by 3214
Abstract
Cross-calibration using an autocollimator and a polygon is the traditional method for calibrating a rotary encoder. These angles, which can be calibrated using this method, are limited by the pitch angle of the polygon, which is 15° for a 24-faced polygon. In this [...] Read more.
Cross-calibration using an autocollimator and a polygon is the traditional method for calibrating a rotary encoder. These angles, which can be calibrated using this method, are limited by the pitch angle of the polygon, which is 15° for a 24-faced polygon. In this work, we propose a new shift-angle method using the same setup as the traditional method. However, the new method can measure smaller than the pitch angle of the polygon, which is the measurement limitation of the traditional method. The proposed method can calibrate every angle of the rotary encoder. In the experiment, we use an autocollimator and a 24-faced polygon to calibrate the SelfA rotary encoder to verify the proposed shift-angle method. The SelfA rotary encoder, which comprises one rotary encoder and 12 read heads, is calibrated using self-calibration. The difference between the calibration results obtained by applying these two methods to the same SelfA rotary encoder is smaller than ±0.1″. Full article
Show Figures

Figure 1

22 pages, 6244 KiB  
Article
A Deconvolutional Deblurring Algorithm Based on Dual-Channel Images
by Yang Bai, Zheng Tan, Qunbo Lv, Peidong He and Min Huang
Appl. Sci. 2022, 12(10), 4864; https://0-doi-org.brum.beds.ac.uk/10.3390/app12104864 - 11 May 2022
Viewed by 1369
Abstract
Aiming at the motion blur restoration of large-scale dual-channel space-variant images, this paper proposes a dual-channel image deblurring method based on the idea of block aggregation, by studying imaging principles and existing algorithms. The study first analyzed the model of dual-channel space-variant imaging, [...] Read more.
Aiming at the motion blur restoration of large-scale dual-channel space-variant images, this paper proposes a dual-channel image deblurring method based on the idea of block aggregation, by studying imaging principles and existing algorithms. The study first analyzed the model of dual-channel space-variant imaging, reconstructed the kernel estimation process using the side prior information from the correlation of the two-channel images, and then used a clustering algorithm to classify kernels and restore the images. In the kernel estimation process, the study proposed two kinds of regularization terms. One is based on image correlation, and the other is based on the information from another channel input. In the image restoration process, the mean-shift clustering algorithm was used to calculate the block image kernel weights and reconstruct the final restored image according to the weights. As the experimental section shows, the restoration effect of this algorithm was better than that of the other compared algorithms. Full article
Show Figures

Figure 1

9 pages, 1986 KiB  
Article
Bound-State Soliton and Noise-like Pulse Generation in a Thulium-Doped Fiber Laser Based on a Nonlinear Optical Loop Mirror
by Maria Michalska, Jakub Michalski, Pawel Grzes and Jacek Swiderski
Appl. Sci. 2022, 12(3), 1664; https://0-doi-org.brum.beds.ac.uk/10.3390/app12031664 - 05 Feb 2022
Cited by 4 | Viewed by 2264
Abstract
We demonstrate a thulium-doped, mode-locked, all-fiber laser capable of operating in two generation regimes: dispersion-managed soliton and noise-like pulse (NLP). Employing a nonlinear optical loop mirror as an artificial saturable absorber, the oscillator generated optical pulses with a fundamental pulse repetition frequency of [...] Read more.
We demonstrate a thulium-doped, mode-locked, all-fiber laser capable of operating in two generation regimes: dispersion-managed soliton and noise-like pulse (NLP). Employing a nonlinear optical loop mirror as an artificial saturable absorber, the oscillator generated optical pulses with a fundamental pulse repetition frequency of ~15.795 MHz. The total net dispersion of the laser cavity had a slightly anomalous group delay dispersion value of −0.016 ps2. After appropriate adjustment of a polarization controller, bound states of a dispersion-managed soliton composed of three pulses with fixed soliton separations were also observed. NLP generation, tunable over 35 nm from 1943.5 to 1978 nm, was also presented in the same laser setup. To our knowledge, this is the first report of the generation of tunable NLPs in a mode-locked thulium-doped fiber laser based on a nonlinear loop mirror saturable absorber. Full article
Show Figures

Figure 1

15 pages, 3747 KiB  
Article
Study on the Light Field Regulation of UVC-LED Disinfection for Cold Chain Transportation
by Zuwei Guan, Peng Liu, Tianfeng Zhou, Lin Zhou, Danmei Zhang, Qiuchen Xie, Qian Yu, Yupeng He, Sijiang Wang, Xibin Wang and Wenxiang Zhao
Appl. Sci. 2022, 12(3), 1285; https://0-doi-org.brum.beds.ac.uk/10.3390/app12031285 - 26 Jan 2022
Cited by 2 | Viewed by 2536
Abstract
In this paper, the pain point that cold chain transportation urgently needs for an efficient disinfection method is pointed out. Thus, this work aims at solving the problems and improving the disinfection efficiency in cold chain transportation. While Ultraviolet-C (UVC) irradiation is an [...] Read more.
In this paper, the pain point that cold chain transportation urgently needs for an efficient disinfection method is pointed out. Thus, this work aims at solving the problems and improving the disinfection efficiency in cold chain transportation. While Ultraviolet-C (UVC) irradiation is an effective method by which to kill viruses, it is difficult to apply the commonly used UVC-LED disinfection light source to ice-covered cold chain transportation due to its uneven light field distribution. Thus, the light field regulation of UVC-LED disinfection for cold chain transportation is studied. A UVC-LED chip with a wavelength of 275 nm was used as a light source, and parallel light was obtained by collimating lenses. Then, microlens array homogenization technology was used to shape the UVC light into a uniform light spot, with an energy space uniformity rate of 96.4%. Moreover, a simulation was conducted to compare the effects of the ice layer on the absorption of UVC light. Finally, an experiment was carried out to verify that the disinfection efficiency can be increased nearly by 30% with the proposed system by disinfecting E. coli (Escherichia coli), and the results indicate that the proposed system is an effective disinfection solution during cold chain transportation. Full article
Show Figures

Figure 1

9 pages, 2516 KiB  
Article
A Data Transmission Method with Spectral Switches via Electroabsorption
by Jyun-Ping Chang, Jun-Hong Weng, Hsun-Ching Hsu, Pei-Yuan Lee and Pin Han
Appl. Sci. 2022, 12(3), 979; https://0-doi-org.brum.beds.ac.uk/10.3390/app12030979 - 18 Jan 2022
Cited by 1 | Viewed by 1312
Abstract
In the past, the waveguide electroabsorption effect has generally been used as an intensity modulator for quasi-monochromatic light, such as lasers. Here, we study how this effect affects polychromatic light spectra. We find that for light with a Gaussian distribution spectrum, the spectral [...] Read more.
In the past, the waveguide electroabsorption effect has generally been used as an intensity modulator for quasi-monochromatic light, such as lasers. Here, we study how this effect affects polychromatic light spectra. We find that for light with a Gaussian distribution spectrum, the spectral peak shift (red shift or blue shift) can be controlled by the magnitude of the applied voltage, as long as the center wavelength and the spectral band are properly selected. This result can be used as a data transmission scheme at the integrated chip level or in free space. It may offer a good option for some other light sources, such as low-cost LED or ELED (edge emitting LED), with wider spectral bandwidths. Full article
Show Figures

Figure 1

2021

Jump to: 2024, 2023, 2022, 2020, 2019

19 pages, 6277 KiB  
Article
Assessment the Visual Clarity of the Projector in Classroom and Innovative Asymmetric Distribution LED Tube Applications
by Chun-Hsi Liu, Chun-Yu Hsiao, Jyh-Cherng Gu, Kuan-Yi Liu, Chih-Hung Chang, Chen-En Lee and Shu-Fen Yan
Appl. Sci. 2021, 11(23), 11153; https://0-doi-org.brum.beds.ac.uk/10.3390/app112311153 - 24 Nov 2021
Cited by 2 | Viewed by 2175
Abstract
The paper aims to explore the relationship between the vertical plane luminance on projection screens and human visual clarity in the classroom or meeting room. While controlling the lighting environment conditions of the classroom to create different luminous distributions and luminance on the [...] Read more.
The paper aims to explore the relationship between the vertical plane luminance on projection screens and human visual clarity in the classroom or meeting room. While controlling the lighting environment conditions of the classroom to create different luminous distributions and luminance on the projection screen, a survey is conducted to understand students’ visual experience about screen clarity during the field experiment. The luminance of each picture on the projection screen is measured under the specified lighting conditions of luminaires in the classroom, and the relationship is formulated between the average luminance on the projection screen and the visual satisfaction based on clarity of experience. This will be useful for further studying the acceptable threshold of luminance distribution in the classroom to provide a better visual clarity and lighting quality of projection screens while teaching. In this study, the measurement and performance evaluation on a projection screen were carried out at a classroom in the National Taiwan University of Science and Technology (NTUST). By using an image luminance meter and analyzing the research results, we propose an improvement strategy for asymmetric luminous distribution design of LED light tube and light switch control mechanism of luminaires to resolve the inadequate luminance of the vertical projection screen area to improve the lighting quality and visual clarity of the projection screen while teaching with the least cost. Full article
Show Figures

Figure 1

11 pages, 5074 KiB  
Article
Training and Inference of Optical Neural Networks with Noise and Low-Bits Control
by Danni Zhang, Yejin Zhang, Ye Zhang, Yanmei Su, Junkai Yi, Pengfei Wang, Ruiting Wang, Guangzhen Luo, Xuliang Zhou and Jiaoqing Pan
Appl. Sci. 2021, 11(8), 3692; https://0-doi-org.brum.beds.ac.uk/10.3390/app11083692 - 20 Apr 2021
Cited by 4 | Viewed by 2051
Abstract
Optical neural networks (ONNs) are getting more and more attention due to their advantages such as high-speed and low power consumption. However, in a non-ideal environment, the noise and low-bits control may heavily lead to a decrease in the accuracy of ONNs. Since [...] Read more.
Optical neural networks (ONNs) are getting more and more attention due to their advantages such as high-speed and low power consumption. However, in a non-ideal environment, the noise and low-bits control may heavily lead to a decrease in the accuracy of ONNs. Since there is AD/DA conversion in a simulated neural network, it needs to be quantified in the model. In this paper, we propose a quantitative method to adapt ONN to a non-ideal environment with fixed-point transmission, based on the new chip structure we designed previously. An MNIST hand-written data set was used to test and simulate the model we established. The experimental results showed that the quantization-noise model we established has a good performance, for which the accuracy was up to about 96%. Compared with the electrical method, the proposed quantization method can effectively solve the non-ideal ONN problem. Full article
Show Figures

Figure 1

12 pages, 6023 KiB  
Article
Two-Dimensional Digital Beam Steering Based on Liquid Crystal Phase Gratings
by Mario García de Blas, Morten Andreas Geday, Jose Manuel Otón and Xabier Quintana Arregui
Appl. Sci. 2021, 11(8), 3632; https://0-doi-org.brum.beds.ac.uk/10.3390/app11083632 - 17 Apr 2021
Cited by 8 | Viewed by 2979
Abstract
Electrically tunable phase gratings are able to steer an incoming light beam without employing movable parts. Here, we present the design and implementation of a 2D beam steering device by cascading two orthogonal 1D liquid crystal (LC) based phase gratings, each having an [...] Read more.
Electrically tunable phase gratings are able to steer an incoming light beam without employing movable parts. Here, we present the design and implementation of a 2D beam steering device by cascading two orthogonal 1D liquid crystal (LC) based phase gratings, each having an array of 72 rectangular individually controlled pixels and driven by a custom 12-bit Pulse-Width Modulation (PWM) electrical driver. High-resolution structures in glass wafers coated with transparent Indium-Tin Oxide (ITO) have been prepared using Direct Laser Writing (DLW) techniques. With DLW, a high number of pixels can easily be drawn with an interpixel space of less than 3 μm, leading to devices with a high fill factor. The active area of the cascaded device is 1.1 × 1.1 mm2. We present a 72 × 72 point efficiency map corresponding to a maximum diagonal steering angle of 1.65°. Special attention has been paid to make the device compatible with space application by avoiding electronics in the active area. Full article
Show Figures

Figure 1

11 pages, 5224 KiB  
Article
Design of a Cell Phone Lens-Based Miniature Microscope with Configurable Magnification Ratio
by Xinjun Wan and Xuechen Tao
Appl. Sci. 2021, 11(8), 3392; https://0-doi-org.brum.beds.ac.uk/10.3390/app11083392 - 09 Apr 2021
Cited by 7 | Viewed by 4714
Abstract
Application of cell-phone-based microscopes has been hindered by limitations such as inferior image quality, fixed magnification and inconvenient operation. In this paper, we propose a reverse cell phone lens-based miniature microscope with a configurable magnification ratio. By switching the objectives of three camera [...] Read more.
Application of cell-phone-based microscopes has been hindered by limitations such as inferior image quality, fixed magnification and inconvenient operation. In this paper, we propose a reverse cell phone lens-based miniature microscope with a configurable magnification ratio. By switching the objectives of three camera lens and applying the digital zooming function of the cell phone, a cell phone microscope is built with the continuously configurable magnification ratio between 0.8×–11.5×. At the same time, the miniature microscope can capture high-quality microscopic images with a maximum resolution of up to 575 lp/mm and a maximum field of view (FOV) of up to 7213 × 5443 μm. Furthermore, by moving the tube lens module of the microscope out of the cell phone body, the built miniature microscope is as compact as a <20 mm side length cube, improving operational experience profoundly. The proposed scheme marks a big step forward in terms of the imaging performance and user operational convenience for cell phone microscopes. Full article
Show Figures

Figure 1

14 pages, 3772 KiB  
Article
Improvement for Convolutional Neural Networks in Image Classification Using Long Skip Connection
by Hong Hai Hoang and Hoang Hieu Trinh
Appl. Sci. 2021, 11(5), 2092; https://0-doi-org.brum.beds.ac.uk/10.3390/app11052092 - 26 Feb 2021
Cited by 10 | Viewed by 2987
Abstract
In this paper, we examine and research the effect of long skip connection on convolutional neural networks (CNNs) for the tasks of image (surface defect) classification. The standard popular models only apply short skip connection inside blocks (layers with the same size). We [...] Read more.
In this paper, we examine and research the effect of long skip connection on convolutional neural networks (CNNs) for the tasks of image (surface defect) classification. The standard popular models only apply short skip connection inside blocks (layers with the same size). We apply the long version of residual connection on several proposed models, which aims to reuse the lost spatial knowledge from the layers close to input. For some models, Depthwise Separable Convolution is used rather than traditional convolution in order to reduce both count of parameters and floating-point operations per second (FLOPs). Comparative experiments of the newly upgraded models and some popular models have been carried out on different datasets including Bamboo strips datasets and a reduced version of ImageNet. The modified version of DenseNet 121 (we call MDenseNet 121) achieves higher validation accuracy while it has about 75% of weights and FLOPs in comparison to the original DenseNet 121. Full article
Show Figures

Figure 1

12 pages, 3860 KiB  
Article
Fabrication and Optical Characterization of Polymeric Aspherical Microlens Array Using Hot Embossing Technology
by Yanlong Li, Kangsen Li and Feng Gong
Appl. Sci. 2021, 11(2), 882; https://0-doi-org.brum.beds.ac.uk/10.3390/app11020882 - 19 Jan 2021
Cited by 12 | Viewed by 3899
Abstract
Hot embossing has been widely used in fabricating microlens arrays because of its low cost, high efficiency, and high quality. The process parameters such as molding temperature, molding pressure, and holding temperature affect the microlens array’s replication quality. This work selected the stainless [...] Read more.
Hot embossing has been widely used in fabricating microlens arrays because of its low cost, high efficiency, and high quality. The process parameters such as molding temperature, molding pressure, and holding temperature affect the microlens array’s replication quality. This work selected the stainless steel S136H tool steel as the mold material to process an aspheric microlens array structure through ultra-precision milling. Polymethyl methacrylate (PMMA) microlens arrays with different surface replication were prepared by controlling the molding temperature, molding pressure, and holding temperature. By analyzing the surface quality, contour replication, and optical imaging of hot-embossed samples, the optimal molding temperature of PMMA for optimal replication of aspheric lens arrays was determined as 130 °C. Besides, the internal elastic recovery of PMMA affected the dimensional accuracy and optical performance of the lens. The results showed that, at the molding pressure of 400 N and the holding temperature of 60 °C, the surface defects were eliminated, and the aspheric lens array had perfect replication with a profile deviation of only 4 μm. The aspheric microlens array with good quality was eventually achieved by these optimal process parameters, which provides a foundation for producing aspheric microlens arrays in a low-cost and high-efficiency way. Full article
Show Figures

Figure 1

2020

Jump to: 2024, 2023, 2022, 2021, 2019

11 pages, 1873 KiB  
Article
Model-Based Design and Simulation of Paraxial Ray Optics Systems
by Eric Fujiwara and Cristiano M. B. Cordeiro
Appl. Sci. 2020, 10(22), 8278; https://0-doi-org.brum.beds.ac.uk/10.3390/app10228278 - 22 Nov 2020
Cited by 2 | Viewed by 3247
Abstract
A model-based design allows representing complex, multi-domain systems as interconnected functional blocks, yielding graphical, intuitive information about the overall project, besides simplifying simulation. This work proposes using the modular approach as an optical engineering design and educational tool for developing paraxial ray optics [...] Read more.
A model-based design allows representing complex, multi-domain systems as interconnected functional blocks, yielding graphical, intuitive information about the overall project, besides simplifying simulation. This work proposes using the modular approach as an optical engineering design and educational tool for developing paraxial ray optics setups, providing further integration with mechatronics subsystems and control loops. An expanded version of the ABCD transfer matrix modeling is implemented in MATLAB Simulink environment to simultaneously perform ray tracing and dynamic simulations. The methodology is validated for different problems, including paraxial cloaking, transmission through a multimode optical fiber, a Fabry–Perot interferometer, and an optical pickup with automatic focus, yielding reliable results with prospective applications in optical engineering design and for creating virtual labs devoted to multiphysics and mechatronics engineering courses. Full article
Show Figures

Figure 1

13 pages, 24841 KiB  
Article
Optimization Design of the Spaceborne Connecting Structure for a Lightweight Space Camera
by Mengqi Shao, Lei Zhang and Xuezhi Jia
Appl. Sci. 2020, 10(22), 8249; https://0-doi-org.brum.beds.ac.uk/10.3390/app10228249 - 20 Nov 2020
Cited by 2 | Viewed by 1702
Abstract
For a lightweight space camera installed vertically with a satellite platform, due to the different conditions between ground and orbit, the relative deformation between the camera and the satellite platform results in a drift of the camera line of sight (LOS), which affects [...] Read more.
For a lightweight space camera installed vertically with a satellite platform, due to the different conditions between ground and orbit, the relative deformation between the camera and the satellite platform results in a drift of the camera line of sight (LOS), which affects the imaging quality. This paper proposed an optimization method for the spaceborne connecting structure considering the camera LOS drift. By using a variable density topology optimization method, the configuration of the connecting structure was obtained. Based on the configuration, the sensitivity of its size parameters to the system’s performance was analyzed. Analysis data showed that the size parameters have an obvious influence on the camera LOS shift. In order to obtain the optimal combination of size parameters, a multi-objective parametric optimization model was established. Finally, engineering analysis of the optimized structure showed that the system performances meet the design requirements of the satellite, and the lightweight ratio of the connecting structure reaches 54%. This study provides a reference for the design of other similar structures for space cameras. Full article
Show Figures

Figure 1

10 pages, 3576 KiB  
Article
Tunable non-Hermiticity in Coupled Photonic Crystal Cavities with Asymmetric Optical Gain
by Kyoung-Ho Kim, Muhammad Sujak, Evan S. H. Kang and You-Shin No
Appl. Sci. 2020, 10(22), 8074; https://0-doi-org.brum.beds.ac.uk/10.3390/app10228074 - 14 Nov 2020
Cited by 1 | Viewed by 1949
Abstract
We report a rationally designed coupled photonic crystal (PhC) cavity system that comprises two identical linear defect nanocavities, and we numerically investigate the controllable non-Hermitian optical properties of the eigenmodes of the nanocavities. Three different coupling schemes, namely, the tuning of the sizes [...] Read more.
We report a rationally designed coupled photonic crystal (PhC) cavity system that comprises two identical linear defect nanocavities, and we numerically investigate the controllable non-Hermitian optical properties of the eigenmodes of the nanocavities. Three different coupling schemes, namely, the tuning of the sizes of shared airholes, vertical shifting of one of the nanocavities, and lateral shifting of one of the nanocavities, are proposed. We examined the ability of these schemes to control the coupling strength between component cavities, which is a key factor that determines the non-Hermiticity of the system. Moreover, we introduce controlled levels of spatially asymmetric optical gain to the coupled PhC cavity by employing the vertical shifting scheme and independently tuning the gain and loss of individual nanocavities. Consequently, we successfully achieve the correspondingly tuned non-Hermitian behaviors of complex eigenfrequencies, such as the controlled emergence of phase transitions at exceptional points and the asymmetric development of amplified and decayed eigenmodes. Full article
Show Figures

Figure 1

15 pages, 3356 KiB  
Article
Thermo-Optic Numerical Research on Segmented Circular LD Arrays Side-Pumping a Nd:YAG Laser Rod
by Wei Wang, Qin Zhao, Wenqing Gao, Zhenyue Hu, Qihang Zhao and Sen Yang
Appl. Sci. 2020, 10(20), 7316; https://0-doi-org.brum.beds.ac.uk/10.3390/app10207316 - 19 Oct 2020
Cited by 2 | Viewed by 2031
Abstract
The configuration designs of the laser diode (LD) side-pumping laser rods focus on how to solve the space conflict between the pump and heat-removal devices because both want to use the larger lateral surface of the laser rod. The conflict is better balanced [...] Read more.
The configuration designs of the laser diode (LD) side-pumping laser rods focus on how to solve the space conflict between the pump and heat-removal devices because both want to use the larger lateral surface of the laser rod. The conflict is better balanced in the three different side-pumping geometries: the segmented circular LD array side-pumping configuration, the annular liquid-cooling structure, and the compensated semicircular LD array side-pumping arrangement. The temperature distributions and thermo-optic effects of the laser rod in the segmented circular LD array side-pumping configuration are analyzed in contrast with those in the other arrangements. The numerical results indicate that the periodical segment-pumping scheme provides higher beam quality than the compensated semicircular side-pumping scheme, enabling removal of the complex liquid cooling system in medium-power applications, thus showing the potential to be used in compact and miniature laser systems. Full article
Show Figures

Figure 1

10 pages, 3833 KiB  
Article
Verification of an Accommodative Response for Depth Measurement of Floating Hologram Using a Holographic Optical Element
by Leehwan Hwang, Sungjae Ha, Philippe Gentet, Jaehyun Lee, Soonchul Kwon and Seunghyun Lee
Appl. Sci. 2020, 10(19), 6788; https://0-doi-org.brum.beds.ac.uk/10.3390/app10196788 - 28 Sep 2020
Cited by 3 | Viewed by 2501
Abstract
Floating holograms using holographic optical element screens differ from existing systems because they can float 2D images in the air and provide a sense of depth. Until now, the verification of such displays has been conducted only on the system implementation, and only [...] Read more.
Floating holograms using holographic optical element screens differ from existing systems because they can float 2D images in the air and provide a sense of depth. Until now, the verification of such displays has been conducted only on the system implementation, and only the diffraction efficiency and angle of view of the hologram have been verified. Although such displays can be directly observed with the human eye, the eye’s control ability has not been quantitatively verified. In this study, we verified that the focus of the observer coincided with the appropriate depth value determined with experiments. This was achieved by measuring the amount of control reaction from the perspective of the observer on the image of the floating hologram using a holographic optical element (HOE). An autorefractor was used, and we confirmed that an image with a sense of depth can be observed from the interaction of the observer’s focus and convergence on the 2D floating image using a HOE. Thus, the realization of content with a sense of depth of 2D projected images using a HOE in terms of human factors was quantitatively verified. Full article
Show Figures

Figure 1

25 pages, 12152 KiB  
Article
Automatic Shadow Detection for Multispectral Satellite Remote Sensing Images in Invariant Color Spaces
by Hongyin Han, Chengshan Han, Taiji Lan, Liang Huang, Changhong Hu and Xucheng Xue
Appl. Sci. 2020, 10(18), 6467; https://0-doi-org.brum.beds.ac.uk/10.3390/app10186467 - 17 Sep 2020
Cited by 14 | Viewed by 2732
Abstract
Shadow often results in difficulties for subsequent image applications of multispectral satellite remote sensing images, like object recognition and change detection. With continuous improvement in both spatial and spectral resolutions of satellite remote sensing images, a more serious impact occurs on satellite remote [...] Read more.
Shadow often results in difficulties for subsequent image applications of multispectral satellite remote sensing images, like object recognition and change detection. With continuous improvement in both spatial and spectral resolutions of satellite remote sensing images, a more serious impact occurs on satellite remote sensing image interpretation due to the existence of shadow. Though various shadow detection methods have been developed, problems of both shadow omission and nonshadow misclassification still exist for detecting shadow well in high-resolution multispectral satellite remote sensing images. These shadow detection problems mainly include high small shadow omission and typical nonshadow misclassification (like bluish and greenish nonshadow misclassification, and large dark nonshadow misclassification). For further resolving these problems, a new shadow index is developed based on the analysis of the property difference between shadow and the corresponding nonshadow with several multispectral band components (i.e., near-infrared, red, green and blue components) and hue and intensity components in various invariant color spaces (i.e., HIS, HSV, CIELCh, YCbCr and YIQ), respectively. The shadow mask is further acquired by applying an optimal threshold determined automatically on the shadow index image. The final shadow image is further optimized with a definite morphological operation of opening and closing. The proposed algorithm is verified with many images from WorldView-3 and WorldView-2 acquired at different times and sites. The proposed algorithm performance is particularly evaluated by qualitative visual sense comparison and quantitative assessment of shadow detection results in comparative experiments with two WorldView-3 test images of Tripoli, Libya. Both the better visual sense and the higher overall accuracy (over 92% for the test image Tripoli-1 and approximately 91% for the test image Tripoli-2) of the experimental results together deliver the excellent performance and robustness of the proposed shadow detection approach for shadow detection of high-resolution multispectral satellite remote sensing images. The proposed shadow detection approach is promised to further alleviate typical shadow detection problems of high small shadow omission and typical nonshadow misclassification for high-resolution multispectral satellite remote sensing images. Full article
Show Figures

Graphical abstract

17 pages, 8061 KiB  
Article
A Design for a Manufacturing-Constrained Off-Axis Four-Mirror Reflective System
by Ruoxin Liu, Zexiao Li, Yiting Duan and Fengzhou Fang
Appl. Sci. 2020, 10(15), 5387; https://0-doi-org.brum.beds.ac.uk/10.3390/app10155387 - 04 Aug 2020
Cited by 4 | Viewed by 3202
Abstract
Off-axis reflective optical systems find wide applications in various industries, but the related manufacturing issues have not been well considered in the design process. This paper proposed a design method for cylindrical reflective systems considering manufacturing constraints to facilitate ultra-precision raster milling. An [...] Read more.
Off-axis reflective optical systems find wide applications in various industries, but the related manufacturing issues have not been well considered in the design process. This paper proposed a design method for cylindrical reflective systems considering manufacturing constraints to facilitate ultra-precision raster milling. An appropriate index to evaluate manufacturing constraints is established. The optimization solution is implemented for the objective function composed of primary aberration coefficients with weights and constraint conditions of the structural configuration by introducing the genetic algorithm. The four-mirror initial structure with a good imaging quality and a special structural configuration is then obtained. The method’s feasibility is validated by designing an off-axis four-mirror afocal system with an entrance pupil diameter of 170 mm, a field of view of 3° × 3° and a compression ratio of five times. All mirrors in the system are designed to be distributed along a cylinder. Full article
Show Figures

Figure 1

10 pages, 2532 KiB  
Article
Modulation and Control Technology for Generating Movable Super-Diffraction Optical Needle by Oblique Incidence
by Simo Wang, Siyang Yu, Fanxing Li, Fuping Peng, Jialin Du, Bo Qi, Lifang Shi and Wei Yan
Appl. Sci. 2020, 10(15), 5237; https://0-doi-org.brum.beds.ac.uk/10.3390/app10155237 - 29 Jul 2020
Cited by 3 | Viewed by 1890
Abstract
The movable super-diffraction optical needle (MSON) is a tightly focused beam like a “needle”, which can realize vector scanning on the focusing plane. Not only does it have a long focal depth, but its resolution also exceeds the diffraction limit. The modulation and [...] Read more.
The movable super-diffraction optical needle (MSON) is a tightly focused beam like a “needle”, which can realize vector scanning on the focusing plane. Not only does it have a long focal depth, but its resolution also exceeds the diffraction limit. The modulation and control technology required for generating MSON by oblique incidence is explored in this manuscript for the purpose of processing high-aspect-ratio, sub-wavelength structures. As the optical needle generated by traditional methods is static and sensitive to variation of the angle information of the incident beam, here we introduce a confocal scanning system by using a two-dimensional galvanometer system, a scan lens, and a tube lens to control the oblique incidence angle. The effects of the oblique incidence angle on the resolution, depth of focus, uniformity, and side lobes of the MSON were analyzed. Further, the voltage-controlled liquid crystal located between the scan lens and the 2D galvanometer system can be used to compensate for the additional phase difference caused by oblique incidence. The aspect ratio is defined as the ratio of depth of focus to resolution. By modulating and controlling the light field, the MSON with high aspect ratio (7.36), sub-diffractive beam size (0.42λ), and long depth of focus (3.09λ) has been obtained with homogeneous intensity, and suppressed side lobes. High speed, high axial positioning tolerance, and high-resolution laser processing can also be achieved, which removes the restrictions presented by traditional laser processing technology, for which high resolution and long depth of focus cannot be achieved simultaneously. Full article
Show Figures

Figure 1

8 pages, 6068 KiB  
Article
High-Power Broadband Frequency Chirped Intensity-Modulated Single-Frequency 1064-nm Laser
by Kun Li, Suhui Yang, Xin Wang and Zhuo Li
Appl. Sci. 2020, 10(13), 4450; https://0-doi-org.brum.beds.ac.uk/10.3390/app10134450 - 28 Jun 2020
Cited by 2 | Viewed by 2426
Abstract
Optical carried microwave radar (OCMR), combining the advantages of lidar and microwave radar, uses an intensity-modulated laser beam as the medium to detect the distance and velocity of objects. In order to achieve a high ranging resolution at long distance, a high-power frequency [...] Read more.
Optical carried microwave radar (OCMR), combining the advantages of lidar and microwave radar, uses an intensity-modulated laser beam as the medium to detect the distance and velocity of objects. In order to achieve a high ranging resolution at long distance, a high-power frequency chirped intensity-modulated light source at a 1064-nm wavelength was developed. A low-power narrow-linewidth 1064-nm laser beam was input to a Mach-Zehnder electro-optic modulator (EOM), and the frequency of the EOM was tuned from 10 MHz to 2.1 GHz. The output from the EOM was coupled to a laser-diode-pumped ytterbium-doped fiber amplifier (YDFA). A maximum output power of 29.5 W was achieved from the YDFA. We measured the frequency characteristics of the modulated laser beams before and after amplification, respectively. The amplification process did not bring any obvious degeneration of the modulation in terms of the bandwidth, frequency stability, chirping linearity, and modulation depth. Our research presents a new approach of obtaining a high-power broad-band intensity-modulated light source for OCMR. Full article
Show Figures

Graphical abstract

13 pages, 6970 KiB  
Article
Design and Evaluation of Uniform LED Illumination Based on Double Linear Fresnel Lenses
by Hoang Vu, Ngoc Minh Kieu, Do Thi Gam, Seoyong Shin, Tran Quoc Tien and Ngoc Hai Vu
Appl. Sci. 2020, 10(9), 3257; https://0-doi-org.brum.beds.ac.uk/10.3390/app10093257 - 07 May 2020
Cited by 10 | Viewed by 7661
Abstract
Redistribution of LED radiation in lighting is necessary in many applications. In this article, we propose a new optical component design for LED lighting to achieve a higher performance. The design consists of a commercial collimator and two linear Fresnel lenses. The LED [...] Read more.
Redistribution of LED radiation in lighting is necessary in many applications. In this article, we propose a new optical component design for LED lighting to achieve a higher performance. The design consists of a commercial collimator and two linear Fresnel lenses. The LED radiation is collimated by a collimator and redistributed by double linear Fresnel lenses to create a square-shaped, uniform distribution. The linear Fresnel lenses design is based on Snell’s law and the “edge-ray principle”. The optical devices are made from poly methyl methacrylate (PMMA) using a high-speed computer numerical control (CNC) machine. The LED prototypes with complementary optics were measured, and the optical intensity distribution was evaluated. The numerical results showed we obtained a free-form lens that produced an illumination uniformity of 78% with an efficiency of 77%. We used the developed LED light sources for field experiments in agricultural lighting. The figures of these tests showed positive effects with control flowering criteria and advantages of harvested products in comparison with the conventional LED sources. This allows our approach in this paper to be considered as an alternative candidate for highly efficient and energy-saving LED lighting applications. Full article
Show Figures

Graphical abstract

11 pages, 3722 KiB  
Article
A Displacement Measuring Interferometer Based on a Frequency-Locked Laser Diode with High Modulation Frequency
by Thanh Tung Vu, Hong Hai Hoang, Toan Thang Vu and Ngoc Tam Bui
Appl. Sci. 2020, 10(8), 2693; https://0-doi-org.brum.beds.ac.uk/10.3390/app10082693 - 13 Apr 2020
Cited by 2 | Viewed by 3455
Abstract
Laser interferometers can achieve a nanometer-order uncertainty of measurements when their frequencies are locked to the reference frequencies of the atom or molecule transitions. There are three types of displacement-measuring interferometers: homodyne, heterodyne, and frequency modulation (FM) interferometers. Among these types of interferometer, [...] Read more.
Laser interferometers can achieve a nanometer-order uncertainty of measurements when their frequencies are locked to the reference frequencies of the atom or molecule transitions. There are three types of displacement-measuring interferometers: homodyne, heterodyne, and frequency modulation (FM) interferometers. Among these types of interferometer, the FM interferometer has many advantageous features. The interference signal is a series of time-dependent harmonics of modulation frequency, so the phase shift can be detected accurately using the synchronous detection method. Moreover, the FM interferometer is the most suitable for combination with a frequency-locked laser because both require frequency modulation. In previous research, low modulation frequencies at some tens of kHz have been used to lock the frequency of laser diodes (LDs). The low modulation frequency for the laser source means that the maximum measurement speed of the FM interferometers is limited. This paper proposes a novel contribution regarding the application of a high-frequency modulation for an LD to improve both the frequency stability of the laser source and the measurement speed of the FM interferometer. The frequency of the LD was locked to an I2 hyperfine component at 1 MHz modulation frequency. A high bandwidth lock-in amplifier was utilized to detect the saturated absorption signals of the I2 hyperfine structure and induce the signal to lock the frequency of the LD. The locked LD was then used for an FM displacement measuring interferometer. Moreover, a suitable modulation amplitude that affected the signal-to-noise ratio of both the I2 absorption signal and the harmonic intensity of the interference signal was determined. In order to verify the measurement resolution of the proposed interferometer, the displacement induced by a piezo electric actuator was concurrently measured by the interferometer and a capacitive sensor. The difference of the displacement results was less than 20 nm. To evaluate the measurement speed, the interferometer was used to measure the axial error of a high-speed spindle at 500 rpm. The main conclusion of this study is that a stable displacement interferometer with high accuracy and a high measurement speed can be achieved using an LD frequency locked to an I2 hyperfine transition at a high modulation frequency. Full article
Show Figures

Figure 1

12 pages, 4536 KiB  
Article
Optical Design of a Miniaturized Airborne Push-Broom Spectrometer
by Yang Wang, Zhiyuan Gu, Xiangyue Meng, Lei Zhang and Yuegang Fu
Appl. Sci. 2020, 10(7), 2627; https://0-doi-org.brum.beds.ac.uk/10.3390/app10072627 - 10 Apr 2020
Cited by 4 | Viewed by 2915
Abstract
Combining the requirements of spectrometers for unmanned aerial vehicle platforms, a miniaturized airborne wide-angle push-broom imaging spectrometer with an Offner configuration is designed. The system comprises an objective lens and an Offner-type spectrometer with a spectral range of 400~1000 nm and a spectral [...] Read more.
Combining the requirements of spectrometers for unmanned aerial vehicle platforms, a miniaturized airborne wide-angle push-broom imaging spectrometer with an Offner configuration is designed. The system comprises an objective lens and an Offner-type spectrometer with a spectral range of 400~1000 nm and a spectral resolution of 15 nm. The objective lens and Offner spectrometer are designed in isolation before integration. The front objective lens is an inverted telephoto with a focal length of 13 mm, a relative aperture of 1/4.5, and a field of view of 54°. The frequency of the convex grating in the Offner configuration is 102 LP/mm, and the dispersion width is 2.6 mm. The modulation transfer function of the integrated system is greater than 0.4 at the Nyquist frequency in all spectral bands. To estimate the volume and weight of the system, a preliminary optical–mechanical design scheme is given in this paper. The entire spectrometer has a volume of 130 × 80 × 120 mm and is less than 3 kg, which realizes the miniaturization design of the imaging spectrometer with a wide field of view for unmanned aerial vehicle platforms. Full article
Show Figures

Figure 1

13 pages, 4150 KiB  
Article
Microscope 3D Point Spread Function Evaluation Method on a Confirmed Object Plane Perpendicular to the Optical Axis
by Shuai Mao, Zhenzhou Wang and Jinfeng Pan
Appl. Sci. 2020, 10(7), 2430; https://0-doi-org.brum.beds.ac.uk/10.3390/app10072430 - 02 Apr 2020
Cited by 2 | Viewed by 2919
Abstract
A point spread function evaluation method for a microscope on the object plane that is perpendicular to the optical axis is proposed. The measurement of the incident beam direction from the dual position-sensitive-detector (PSD)-based units, the determination of the object plane perpendicularity and [...] Read more.
A point spread function evaluation method for a microscope on the object plane that is perpendicular to the optical axis is proposed. The measurement of the incident beam direction from the dual position-sensitive-detector (PSD)-based units, the determination of the object plane perpendicularity and the paraxial region, and evaluation methods for the point spread function (PSF) are presented and integrated into the proposed method. The experimental verification demonstrates that the proposed method can achieve a 3D PSF on the perpendicular object plane, as well as magnification, paraxial region evaluation, and confirmation for any microscopic system. Full article
Show Figures

Figure 1

14 pages, 3239 KiB  
Article
Non-Rotationally Symmetric Field Mapping for Back-Scanned Step/Stare Imaging System
by Qiang Fu, Xin Zhang, Jianping Zhang, Guangwei Shi, Shangnan Zhao and Mingxin Liu
Appl. Sci. 2020, 10(7), 2399; https://0-doi-org.brum.beds.ac.uk/10.3390/app10072399 - 01 Apr 2020
Cited by 3 | Viewed by 1986
Abstract
Step/stare imaging with focal plane arrays (FPAs) has become the main approach to achieve wide area coverage and high resolution imaging for long range targets. A fast steering mirror (FSM) is usually utilized to provide back-scanned motion to compensate for the image motion. [...] Read more.
Step/stare imaging with focal plane arrays (FPAs) has become the main approach to achieve wide area coverage and high resolution imaging for long range targets. A fast steering mirror (FSM) is usually utilized to provide back-scanned motion to compensate for the image motion. However, the traditional optical design can just hold one field point relatively stable, typically the central or on-axis field point, on the FPA during back-scanning; all other field points may wander during the exposure due to imaging distortion characteristics of the optical system, which reduces the signal to noise ratio (SNR) of the target. Aiming toward this problem, this paper proposes a non-rotationally symmetric field mapping method for the back-scanned step/stare imaging system, which can make all field points stable on the FPA during back-scanning. First of all, the mathematical model of non-rotationally symmetric field mapping between object space and image space is established. Then, a back-scanned step/stare imaging system based on the model is designed, in which this non-rotationally symmetric mapping can be implemented with an afocal telescope including freeform lenses. Freeform lenses can produce an anamorphic aberration to adjust distortion characteristics of the optical system to control image wander on an FPA. Furthermore, the simulations verify the effectiveness of the method. Full article
Show Figures

Figure 1

23 pages, 6053 KiB  
Article
A Method for the Installation Measurement and Alignment of a Mirror Unit in the Solar Dish Concentrator
by Jian Yan, Youduo Peng and Duzhong Nie
Appl. Sci. 2020, 10(4), 1511; https://0-doi-org.brum.beds.ac.uk/10.3390/app10041511 - 23 Feb 2020
Cited by 2 | Viewed by 2486
Abstract
The mirror unit installation error of the solar parabolic dish concentrator can adversely affect its optical performance causing optical intercept losses and hot spots on the absorber surface, which in turn affect safety. Thus, minimizing mirror installation error is considered very important. In [...] Read more.
The mirror unit installation error of the solar parabolic dish concentrator can adversely affect its optical performance causing optical intercept losses and hot spots on the absorber surface, which in turn affect safety. Thus, minimizing mirror installation error is considered very important. In this paper, a new method for the facet installation measurement and facet alignment of the mirror unit in the dish concentrator is presented. Firstly, a “clean” facet installation error measurement method using photogrammetry is presented. The photogrammetry measures the spatial coordinates of three feature points to reverse the mirror facet alignment error parameters. Next, two novel methods, a three-rotation alignment method and two-rotation alignment method for aligning the mirror facet are presented and corresponding mathematical models. The advantage of these alignment methods is that the adjustment value and order for each support bolt can be determined before the mirror facet is aligned, which could provide quantitative adjustment information to operator and avoid repeated adjustments. Finally, validity of the installation measurement and facet alignment method was verified by a numerical simulation and an experiment using a metal facet alignment. The presented methods do not rely on the geometry of the reflector mirror and could therefore have extensive uses in applications such solar tower and trough concentrator. Full article
Show Figures

Figure 1

18 pages, 5834 KiB  
Article
Side-Scan Sonar Image Fusion Based on Sum-Modified Laplacian Energy Filtering and Improved Dual-Channel Impulse Neural Network
by Ping Zhou, Gang Chen, Mingwei Wang, Xianglin Liu, Song Chen and Runzhi Sun
Appl. Sci. 2020, 10(3), 1028; https://0-doi-org.brum.beds.ac.uk/10.3390/app10031028 - 04 Feb 2020
Cited by 8 | Viewed by 2251
Abstract
The operation mode of a single strip provides incomplete side-scan sonar image in a specific environment and range, resulting in the overlapping area between adjacent strips often with imperfect detection information or inaccurate target contour. In this paper, a sum-modified Laplacian energy filtering [...] Read more.
The operation mode of a single strip provides incomplete side-scan sonar image in a specific environment and range, resulting in the overlapping area between adjacent strips often with imperfect detection information or inaccurate target contour. In this paper, a sum-modified Laplacian energy filtering (SMLF) and improved dual-channel pulse coupled neural network (IDPCNN) are proposed for image fusion of side-scan sonar in the domain of nonsubsampled contourlet transform (NSCT). Among them, SMLF energy is applied to extract the fusion coefficients of the low frequency sub-band, which combines the characteristics of energy information, human visual contrast, and guided filtering to eliminate the pseudo contour effect of block flow. In addition, the IDPCNN model, which utilizes the average gradient, soft limit function, and novel sum-modified Laplacian (NSML) to adaptively represent the corresponding excitation parameters, is applied to improve the depth and activity of pulse ignition, so as to quickly and accurately select the image coefficients of the high frequency sub-band. The experimental results show that the proposed method displays fine geomorphic information and clear target contour in the overlapping area of adjacent strips. The objective index values are generally optimal, which reflect the information of image edge, clarity, and overall similarity. Full article
Show Figures

Figure 1

13 pages, 2227 KiB  
Article
Calibration of Large-Scale Spatial Positioning Systems Based on Photoelectric Scanning Angle Measurements and Spatial Resection in Conjunction with an External Receiver Array
by Chunbao Xiong and Hongzhi Bai
Appl. Sci. 2020, 10(3), 925; https://0-doi-org.brum.beds.ac.uk/10.3390/app10030925 - 31 Jan 2020
Cited by 5 | Viewed by 2440
Abstract
Positioning systems providing high-precision real-time measurements over very large spatial scales are urgently required for large-scale industrial manufacturing applications. While large-scale positioning systems (LSPSs) employing laser transmitter stations have been employed in engineering practice, the introduction of an LSPS into an existing industrial [...] Read more.
Positioning systems providing high-precision real-time measurements over very large spatial scales are urgently required for large-scale industrial manufacturing applications. While large-scale positioning systems (LSPSs) employing laser transmitter stations have been employed in engineering practice, the introduction of an LSPS into an existing industrial manufacturing setting must first solve the problems of docking with existing control points and external parameter calibration. However, calibrating the external parameters of a measurement system is very difficult under extreme and complicated working conditions due to the limited visibility of transmitter stations and the measurement distances involved. This problem is addressed in this paper by proposing a single transmitter station calibration method based on a photoelectric scanning multi-angle resection positioning model that combines photoelectric scanning angle measurements and spatial resection in conjunction with an external receiver array. Positioning information is obtained by solving the unknown parameters of the model according to a nonlinear optimization approach using the Levenberg–Marquardt least-squares fitting algorithm. The feasibility and spatial positioning accuracy of the proposed method are verified experimentally. The experimental results demonstrate that the principles of the proposed method are correct, and the method can achieve millimeter measurement accuracy, which meets the requirements of measurement tasks in engineering applications. Full article
Show Figures

Figure 1

2019

Jump to: 2024, 2023, 2022, 2021, 2020

15 pages, 5472 KiB  
Article
Design of Wide Angle and Large Aperture Optical System with Inner Focus for Compact System Camera Applications
by Hojong Choi and Jaemyung Ryu
Appl. Sci. 2020, 10(1), 179; https://0-doi-org.brum.beds.ac.uk/10.3390/app10010179 - 25 Dec 2019
Cited by 15 | Viewed by 3821
Abstract
Conventionally, a bright, very wide-angle optical system is designed as a floating type optical system that moves two or more lens groups composed of multiple lens in order to focus accurately. These have been widely used as phase detection auto focus (AF) methods [...] Read more.
Conventionally, a bright, very wide-angle optical system is designed as a floating type optical system that moves two or more lens groups composed of multiple lens in order to focus accurately. These have been widely used as phase detection auto focus (AF) methods within conventional digital single-lens reflex (DSLR) cameras. However, a phase detection AF optical system cannot be used when recording motion pictures. In contrast, a compact system camera (CSC) performs AF by the contrast method, where a stepper motor is used as the driving source for moving the optical lens. Nonetheless, to ensure that the focusing lens is lighter, these stepper motors should not have high torque and AF must be possible by moving only one lens. Yet, when focusing is performed with only one lens, aberration change due to focusing lens movement is magnified. Therefore, a very wide-angle optical system comprised of a half-angle of view more than 40 degrees and F of 1/4 has not been developed. Here, a very wide-angle optical system was designed with high resolving power that enables high speed AF, even in contrast mode, by moving only one lens while minimizing aberration change. Full article
Show Figures

Figure 1

13 pages, 3055 KiB  
Article
A Three-Dimensional Tracking Method with the Self-Calibration Functions of Coaxiality and Magnification for Single Fluorescent Nanoparticles
by Shuai Mao, Jin Shen, Yajing Wang, Wei Liu and Jinfeng Pan
Appl. Sci. 2020, 10(1), 131; https://0-doi-org.brum.beds.ac.uk/10.3390/app10010131 - 23 Dec 2019
Viewed by 2214
Abstract
A self-calibrating variable magnification three-dimensional (3D) tracking system for single fluorescent nanoparticles is proposed. The system was based on astigmatic micro-imaging and has a simple configuration incorporating a dual-spot position detection unit ray transfer matrix. By analyzing this matrix and utilizing the beam [...] Read more.
A self-calibrating variable magnification three-dimensional (3D) tracking system for single fluorescent nanoparticles is proposed. The system was based on astigmatic micro-imaging and has a simple configuration incorporating a dual-spot position detection unit ray transfer matrix. By analyzing this matrix and utilizing the beam vector measurement of a dual-spot position detection unit, it was demonstrated that the proposed tracking system had the self-calibration functions of coaxiality and magnification; thus, it could accurately track the adopted fluorescent nanoparticles through zoom microscopical measurements in 3D. The available measurements of the proposed system and accuracy were experimentally validated. Full article
Show Figures

Figure 1

13 pages, 3714 KiB  
Article
Double-Sided Freeform Lens for Light Collimation of Light Emitting Diodes
by Yong-Sin Syu, Chun-Ying Wu and Yung-Chun Lee
Appl. Sci. 2019, 9(24), 5452; https://0-doi-org.brum.beds.ac.uk/10.3390/app9245452 - 12 Dec 2019
Cited by 6 | Viewed by 4568
Abstract
A double-sided freeform lens is proposed for collimating light emitted from light emitting diodes (LEDs). The surface profiles of the lens are mathematically characterized and precisely determined based on a point-source assumption and differential geometry theory. The proposed lens design method is straightforward, [...] Read more.
A double-sided freeform lens is proposed for collimating light emitted from light emitting diodes (LEDs). The surface profiles of the lens are mathematically characterized and precisely determined based on a point-source assumption and differential geometry theory. The proposed lens design method is straightforward, flexible, and effective. Moreover, the optical performance of the lens can be intuitively adjusted by tuning just a small number of design parameters. The simulation results showed that the proposed lens achieved an excellent collimating effect for a commercial ultraviolet (UV) LED. A prototype lens is fabricated in UV-grade poly(methyl methacrylate) material using a standard injection molding process. The light collimating effect of the lens/UV-LED assembly was measured experimentally and was shown to be in good agreement with the simulation results. The collimating angle at the half-energy level was equal to 1.88°. The performance of the UV-LED is thus comparable to that of conventional lithography UV light sources based on mercury arc lamps. Consequently, the proposed double freeform lens showed significant potential for photolithography applications within the industry. Full article
Show Figures

Figure 1

15 pages, 2833 KiB  
Article
Analysis of Dynamic Modulation Transfer Function for Complex Image Motion
by Lizhi Xu, Changxiang Yan, Zhiyuan Gu, Mengyang Li and Chenghao Li
Appl. Sci. 2019, 9(23), 5142; https://0-doi-org.brum.beds.ac.uk/10.3390/app9235142 - 27 Nov 2019
Cited by 7 | Viewed by 3262
Abstract
In remote-sensing imaging, the modulation transfer function (MTF) for image motion relevant to the mixing of multiple forms of motions is hard to calculate because of the complicated image motion expression. In this paper, a new method for calculating the MTF for complex [...] Read more.
In remote-sensing imaging, the modulation transfer function (MTF) for image motion relevant to the mixing of multiple forms of motions is hard to calculate because of the complicated image motion expression. In this paper, a new method for calculating the MTF for complex image motion is proposed. The presented method makes it possible to obtain an analytical MTF expression derived from the mixing of linear motion and sinusoidal motion at an arbitrary frequency. On this basis, we used the summation of infinitely many terms involving the Bessel function to simplify the MTF expression. The truncation error obtained by the use of finite order sum approximations instead of infinite sums is investigated in detail. In order to verify the MTF calculation method, we proposed a simulation method to calculate the variation of MTF in an actual optical system caused by image motion. The mean value of the relative error between the calculation method and the simulation method is less than 5%. The experimental results are consistent with the MTF curve calculated by our method. Full article
Show Figures

Figure 1

9 pages, 6611 KiB  
Article
Silica-Based Sol-Gel Coating with High Transmission at 1053 and 527 nm and Absorption at 351 nm for Frequency-Converting Crystals in High-Power Laser System
by Xue-Ran Deng, Wei Yang, Hao-Hao Hui, Qing-Hua Zhang, Qiao Xu, Jin-Ju Chen, Ji-Liang Zhu and Xiang-Yang Lei
Appl. Sci. 2019, 9(23), 5038; https://0-doi-org.brum.beds.ac.uk/10.3390/app9235038 - 22 Nov 2019
Cited by 4 | Viewed by 2124
Abstract
A high-power laser system is employed to drive the fusion ignition to realize sustainable supply of green energy according to the inertial confinement fusion theory, in which frequency-converting crystals are sealed in the terminal vacuum chamber and utilized to turn the incident laser [...] Read more.
A high-power laser system is employed to drive the fusion ignition to realize sustainable supply of green energy according to the inertial confinement fusion theory, in which frequency-converting crystals are sealed in the terminal vacuum chamber and utilized to turn the incident laser (1053 nm) to the desired one (351 nm). However, the reflected 351 nm laser from the pellet hohlraum that goes back through the frequency-converting crystal is found to be harmful for the upstream elements that are located before the terminal chamber. In this study, a specialized coating system for the frequency-converting crystals was designed and fabricated to both ensure high output power for the fusion and reduce the reflected 351 nm laser energy by absorption. Furthermore, the structural, mechanical, and laser-damage resistant properties of this coating were investigated as well. Full article
Show Figures

Figure 1

7 pages, 2246 KiB  
Article
Self-Injection Locking of a Distributed Feedback Laser Diode Using a High-Finesse Fabry-Perot Microcavity
by Xing Wei, ZhenDa Xie and Shi-Ning Zhu
Appl. Sci. 2019, 9(21), 4616; https://0-doi-org.brum.beds.ac.uk/10.3390/app9214616 - 30 Oct 2019
Cited by 4 | Viewed by 3280
Abstract
Optical microcavities have been widely used in nonlinear optics, quantum optics, and laser technologies. Here we demonstrate the self-injection locking of a distributed feedback diode laser using home-made high-finesse Fabry-Perot microcavity. The Fabry-Perot microcavity is fabricated from an x-cut lithium niobate crystal with [...] Read more.
Optical microcavities have been widely used in nonlinear optics, quantum optics, and laser technologies. Here we demonstrate the self-injection locking of a distributed feedback diode laser using home-made high-finesse Fabry-Perot microcavity. The Fabry-Perot microcavity is fabricated from an x-cut lithium niobate crystal with highly reflective coatings. Frequency pulling effect can be observed for a successful locking, and results in a single-longitudinal mode lasing with narrow linewidth. The lasing wavelength and output power are found robust to the laser-diode current and temperature variations, in comparison to the free-running case. We further characterize the laser linewidth with beat note measurement with a high-performance external cavity diode laser, with beat-note linewidth of 601.85 kHz. This results shows a new method for laser frequency stabilization in a simple setup, and may find applications in telecommunication and spectroscopy. Full article
Show Figures

Figure 1

14 pages, 7329 KiB  
Article
Optical Design of an LED Lighting Source for Fluorescence Microscopes
by Tai-Chih Kuo, Ting-Jou Ding, Jui-Hui Lin and Shih-Hsin Ma
Appl. Sci. 2019, 9(21), 4574; https://0-doi-org.brum.beds.ac.uk/10.3390/app9214574 - 28 Oct 2019
Cited by 7 | Viewed by 5080
Abstract
In this study, we reveal an LED light source model applied in fluorescence microscopes. This optical model is composed of a confocal total internal reflection lens array system (CTLAS) with a nine-LED array. The CTLAS optical system that we designed consists of a [...] Read more.
In this study, we reveal an LED light source model applied in fluorescence microscopes. This optical model is composed of a confocal total internal reflection lens array system (CTLAS) with a nine-LED array. The CTLAS optical system that we designed consists of a total internal reflection (TIR) lens array and a confocal system. The electrical power of the nine-LED array is 7.9 watts, which is lower than traditional light sources, such as the original 120-watt halogen lamps used in fluorescence microscopes (Zeiss, Axio Imager 2). We have successfully applied the CTLAS system to an Axio Imager 2 fluorescence microscope to observe the vascular bundle organization, modified with Cy3 fluorescence molecules, and have found that in the process of system assembly, the fabrication errors of optical lenses could have a critical effect on the CTLAS system. The results of our experiment show that, in order to achieve the same illuminance as that of the halogen lamp, the displacement error tolerances of the lateral x-axis and the longitudinal z-axis must be controlled within 1.3 mm and 1.7 mm, respectively. Full article
Show Figures

Figure 1

18 pages, 7005 KiB  
Article
Imaging Correlography Using Ptychography
by Zhixin Li, Desheng Wen, Zongxi Song, Tuochi Jiang, Weikang Zhang, Gang Liu and Xin Wei
Appl. Sci. 2019, 9(20), 4377; https://0-doi-org.brum.beds.ac.uk/10.3390/app9204377 - 16 Oct 2019
Cited by 6 | Viewed by 3255
Abstract
Imaging correlography, an effective method for long-distance imaging, recovers an object using only the knowledge of the Fourier modulus, without needing phase information. It is not sensitive to atmospheric turbulence or optical imperfections. However, the unreliability of traditional phase retrieval algorithms in imaging [...] Read more.
Imaging correlography, an effective method for long-distance imaging, recovers an object using only the knowledge of the Fourier modulus, without needing phase information. It is not sensitive to atmospheric turbulence or optical imperfections. However, the unreliability of traditional phase retrieval algorithms in imaging correlography has hindered their development. In this work, we join imaging correlography and ptychography together to overcome such obstacles. Instead of detecting the whole object, the object is measured part-by-part with a probe moving in a ptychographic way. A flexible optimization framework is proposed to reconstruct the object rapidly and reliably within a few iterations. In addition, novel image space denoising regularization is plugged into the loss function to reduce the effects of input noise and improve the perceptual quality of the recovered image. Experiments demonstrate that four-fold resolution gains are achievable for the proposed imaging method. We can obtain satisfactory results for both visual and quantitative metrics with one-sixth of the measurements in the conventional imaging correlography. Therefore, the proposed imaging technique is more suitable for long-range practical applications. Full article
Show Figures

Figure 1

12 pages, 2663 KiB  
Article
Research on Polarization and Phase Fading Compensation in Michelson Interferometer Based on 3 × 3 Coupler and Novel Probe with Built-in Faraday Rotator
by Shuaiqi Jing, Jian Rong and Jiayan Tian
Appl. Sci. 2019, 9(19), 4173; https://0-doi-org.brum.beds.ac.uk/10.3390/app9194173 - 05 Oct 2019
Cited by 1 | Viewed by 2878
Abstract
A self-designed probe and a feedback control scheme based on the Michelson interferometer with a 3 × 3 fiber coupler are proposed. A 45° Faraday rotator is built into the self-designed probe, and a feedback control scheme is used to judge the direction [...] Read more.
A self-designed probe and a feedback control scheme based on the Michelson interferometer with a 3 × 3 fiber coupler are proposed. A 45° Faraday rotator is built into the self-designed probe, and a feedback control scheme is used to judge the direction of increase or decrease for the phase compensation, so as to solve the problems of polarization and phase fading. In addition, a result-normalized method is applied in a micro-vibration measurement experiment. The experimental interferometer system achieves a high frequency of 1 MHz micro-vibration. The normalized results keep stable with a maximum deviation from the mean of 1.9% when the power of light reflected back into the self-designed probe is altered. Applied research is carried out by detecting the displacement due to a photoacoustic wave. Therefore, the experimental interferometer system is available for the practical application of micro-displacement measurements, noncontact high-frequency detection, and point-by-point image scanning in biological tissue. Full article
Show Figures

Figure 1

9 pages, 2326 KiB  
Article
Method to Remove Tilt-to-Length Coupling Caused by Interference of Flat-Top Beam and Gaussian Beam
by Ya Zhao, Zhi Wang, Yupeng Li, Chao Fang, Heshan Liu and Huilong Gao
Appl. Sci. 2019, 9(19), 4112; https://0-doi-org.brum.beds.ac.uk/10.3390/app9194112 - 01 Oct 2019
Cited by 10 | Viewed by 3361
Abstract
We discuss the tilt-to-length (TTL) coupling noise caused by interference between a flat-top beam and a Gaussian beam. Several physical models are presented to research the effects of non-diffracted and diffracted beams on TTL noise. A special case that can remove TTL coupling [...] Read more.
We discuss the tilt-to-length (TTL) coupling noise caused by interference between a flat-top beam and a Gaussian beam. Several physical models are presented to research the effects of non-diffracted and diffracted beams on TTL noise. A special case that can remove TTL coupling noise is discovered and is verified via both theoretical analysis and numerical simulations. The proposed case could provide desirable suggestions for the construction of high-precision interferometers such as the Laser Interferometer Space Antenna (LISA), Taiji program, or other interferometry systems. Full article
Show Figures

Figure 1

Back to TopTop