10th Anniversary of Catalysts: Feature Papers in Catalytic Reaction Engineering

A special issue of Catalysts (ISSN 2073-4344). This special issue belongs to the section "Catalytic Reaction Engineering".

Deadline for manuscript submissions: closed (31 December 2022) | Viewed by 29455

Special Issue Editors

Chemical Reactor Engineering Centre (CREC), Faculty of Engineering, Western University, London, ON N6A 5B9, Canada
Interests: catalysis; photocatalysis; reaction engineering; fluidized bed reactors
Special Issues, Collections and Topics in MDPI journals
Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia
Interests: catalysis and reaction engineering – in the areas of oxidative cracking/dehydrogenation of hydrocarbons; catalytic cracking of hydrocarbons, oil to chemicals; chemical looping; blue hydrogen; ammonia decomposition to hydrogen; biomass/heavy oil gasification; pyrolysis of waste materials
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

This inaugural issue of the Catalytic Reaction Engineering Section of the Catalysts journal is a special contribution dedicated to the 10-year anniversary of the successful operation of the Catalysts journal. We are looking forward to publishing first class articles that will address the increasing need for catalyst performance evaluation methods and kinetic modeling using the rigorous procedures of reaction engineering. This issue is also planned to report on research using new methodologies for catalyst characterization and catalyst testing that are relevant to these novel catalysts. Researchers are also invited to reflect on the progress of the numerical methods and associated statistical analyses used to establish catalytic kinetic models and catalytic kinetic parameters with high confidence levels. It is anticipated that this inaugural issue will highlight the wide range of applications involving catalytic processes for hydrogen production, biomass conversion, green renewable fuels, hydrocarbon processes, and CO2 capture. It can be foreseen that these chemical technologies will strongly address, in the coming years, the urgent need of lowering energy demands in chemical processes while minimizing or zeroing CO2 emissions. All this will facilitate the future application of new alternative catalysts to a wide range of industrial chemical processes, which need to be developed and implemented today.

Prof. Dr. Hugo de Lasa
Prof. Dr. Mohammad Mozahar Hossain
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Catalysts is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • catalyst evaluation
  • catalyst kinetics
  • catalyst parameter evaluation
  • alternative energies
  • minimum CO2 emission processes
  • CO2 capture
  • scaling up of catalytic reaction engineering models

Published Papers (15 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

28 pages, 5714 KiB  
Article
Quantification of the Microwave Effect in the Synthesis of 5-Hydroxymethylfurfural over Sulfonated MIL-101(Cr)
by Noor Aljammal, Jeroen Lauwaert, Bert Biesemans, Francis Verpoort, Philippe M. Heynderickx and Joris W. Thybaut
Catalysts 2023, 13(3), 622; https://0-doi-org.brum.beds.ac.uk/10.3390/catal13030622 - 20 Mar 2023
Cited by 1 | Viewed by 1658
Abstract
The potential benefits of microwave irradiation for fructose dehydration into 5 hydroxymethylfurfural (5-HMF) have been quantified over a sulfonated metal–organic framework (MOF), MIL 101(Cr)-SO3H. The effects of temperature (140–170 °C), batch time (5–300 min), and catalyst-to-substrate ratio (0.1–0.01 g/g) were systematically [...] Read more.
The potential benefits of microwave irradiation for fructose dehydration into 5 hydroxymethylfurfural (5-HMF) have been quantified over a sulfonated metal–organic framework (MOF), MIL 101(Cr)-SO3H. The effects of temperature (140–170 °C), batch time (5–300 min), and catalyst-to-substrate ratio (0.1–0.01 g/g) were systematically mapped. After 10 min of microwave (MW) irradiation at 140 °C in a DMSO–acetone reaction medium, practically complete fructose conversion was obtained with a 70% yield of 5-HMF. Without MW, i.e., using conventional heating (CH) at the same conditions, the fructose conversion was limited to 13% without any 5-HMF yield. Rather, 90 min of CH was required to reach a similarly high conversion and yield. The profound impact of moving from CH towards MW conditions on the reaction kinetics, also denoted as the microwave effect, has been quantified through kinetic modeling via a change in the Gibbs free energy of the transition state. The modeling results revealed an eight-fold rate coefficient enhancement for fructose dehydration owing to MW irradiation, while the temperature dependence of the various reaction steps almost completely disappeared in the investigated range of operating conditions. Full article
Show Figures

Graphical abstract

20 pages, 8110 KiB  
Article
Effect of the Calcination Temperature of LaNiO3 on the Structural Properties and Reaction Performance of Catalysts in the Steam Reforming of Methane
by Yujie Wang, Shuairen Qian, Yuxin Chen, Binhang Yan and Yi Cheng
Catalysts 2023, 13(2), 356; https://doi.org/10.3390/catal13020356 - 06 Feb 2023
Cited by 3 | Viewed by 1846
Abstract
The steam reforming of methane (SRM) reaction is a significant process for efficient syngas generation and for promising distributed hydrogen production. In this work, a series of LaNiO3 oxides were prepared using the Pechini method, calcined from 600 °C to 900 °C [...] Read more.
The steam reforming of methane (SRM) reaction is a significant process for efficient syngas generation and for promising distributed hydrogen production. In this work, a series of LaNiO3 oxides were prepared using the Pechini method, calcined from 600 °C to 900 °C and tested for the SRM reaction. Fresh, reduced, and used samples were characterized using STA-MS-FTIR, in situ and ex situ XRD, N2 physical adsorption, H2-TPR, TEM, TPO, and Raman. The results show that LaNiO3 begins to crystallize at about 550 °C, and the increase in calcination temperature results in the following differences in the properties of the LaNiO3 samples: larger LaNiO3 grains, smaller specific surface area, higher reduction temperature, smaller Ni0 grains reduced from the bulk phase, and stronger metal–support interaction. The maximum CH4 conversion could be achieved over LaNiO3 calcinated at 800 °C. In addition, the effect of steam-to-carbon ratio (S/C) on the performance of the SRM reaction was studied, and a S/C of 1.5 was found to be optimal for CH4 conversion. Too strong a metal–support interaction and too much unreacted steam causes a loss of catalytic activity. Finally, it was also proved using TPO and Raman that an increase in calcination temperature improves the carbon deposition resistance of the catalyst. Full article
Show Figures

Graphical abstract

13 pages, 3460 KiB  
Article
Kinetics of Heavy Reformate Conversion to Xylenes over MCM-41 on Zeolite Beta Composite Catalyst
by Syed Ahmed Ali and Mohammad Mozahar Hossain
Catalysts 2023, 13(2), 335; https://0-doi-org.brum.beds.ac.uk/10.3390/catal13020335 - 02 Feb 2023
Cited by 1 | Viewed by 1191
Abstract
Commercial heavy reformate is converted over MCM-41 on zeolite beta composite catalyst to produce mixed xylenes in a fluidized-bed batch reactor. The heavy reformate feedstock contains 67.4 wt.% trimethyl benzenes (TMBs) and 31.1 wt.% methyl ethyl benzenes (MEBs). The experiments were carried out [...] Read more.
Commercial heavy reformate is converted over MCM-41 on zeolite beta composite catalyst to produce mixed xylenes in a fluidized-bed batch reactor. The heavy reformate feedstock contains 67.4 wt.% trimethyl benzenes (TMBs) and 31.1 wt.% methyl ethyl benzenes (MEBs). The experiments were carried out at 300, 350 and 400 °C, while the reaction times were varied between 5 and 20 s. The conversion of MEBs was more than two times the conversion of TMBs. The selectivity to xylenes was quite high (60–65 wt.%) but changed very little with reaction time or temperature. A kinetic model was developed using a five-reaction network. The product composition obtained from the estimated kinetic parameters closely matches the experimental results, which confirms the validity of the assumptions made for kinetic modeling. The trend in the apparent activation energies of the reactions was in accordance with the relative size of the reactant molecules, and the lowest activation energy was for the transalkylation of TMBs with toluene to produce xylenes. Full article
Show Figures

Figure 1

23 pages, 8224 KiB  
Article
Pervaporation Membrane-Catalytic Reactors for Isoamyl Acetate Production
by Jesús David Quintero-Arias, Izabela Dobrosz-Gómez, Hugo de Lasa and Miguel-Ángel Gómez-García
Catalysts 2023, 13(2), 284; https://0-doi-org.brum.beds.ac.uk/10.3390/catal13020284 - 27 Jan 2023
Viewed by 1236
Abstract
This study reports the analysis and design of a liquid phase esterification process to convert acetic acid with isoamyl alcohol into isoamyl acetate via reactive pervaporation, in the presence of an Amberlite IR-120 ion exchange resin catalyst. To accomplish this, a catalytic reactor [...] Read more.
This study reports the analysis and design of a liquid phase esterification process to convert acetic acid with isoamyl alcohol into isoamyl acetate via reactive pervaporation, in the presence of an Amberlite IR-120 ion exchange resin catalyst. To accomplish this, a catalytic reactor is coupled with a separation membrane unit (Pervaporation Membrane Reactor (PVMR)). In the proposed unit, the chemical reaction equilibrium is favorably shifted towards isoamyl acetate formation by removing water with the help of a separation membrane. The study is developed by using relevant thermodynamics, kinetics, and membrane transport models, and by considering different catalytic reactor-pervaporator membrane configurations such as: (a) a two-step continuous fixed bed-pervaporator process (FBR+PVMU), (b) a two-step continuous slurry reactor-pervaporator process (SR+PVMU), (c) a single-step integrated fixed bed-pervaporator reactor (IFBPVMR), and d) a single step integrated slurry-pervaporator reactor (ISPVMR). The performance of the PVMRs is evaluated by using a R recycle ratio, a Ω membrane area to reactor volume ratio, and Da Damköhler dimensionless parameters. From the various proposed configurations, it is shown that the integrated plug flow reactor-pervaporation reactor (IFBPVMR) provides the best performance. On the basis of various simulations and design charts developed in the present study, operational conditions leading to optimum ester yields as high as 0.94 are predicted. These results provide a valuable prospect for the industrial scale-up and implementation of isoamyl acetate production units. Full article
Show Figures

Graphical abstract

19 pages, 5635 KiB  
Article
Development of Innovative Structured Catalysts for the Catalytic Decomposition of N2O at Low Temperatures
by Eugenio Meloni, Marco Martino, Simona Renda, Olga Muccioli, Pluton Pullumbi, Federico Brandani and Vincenzo Palma
Catalysts 2022, 12(11), 1405; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12111405 - 10 Nov 2022
Cited by 1 | Viewed by 1319
Abstract
Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with [...] Read more.
Nitrous oxide (N2O), produced from several human activities, is considered a greenhouse gas with significant environmental impacts. The most promising abatement technology consists of the catalytic decomposition of N2O into nitrogen and oxygen. Many recently published papers dealing with N2O catalytic decomposition over Ni-substituted Co3O4 are related to the treatment of N2O concentrations less than 2 vol% in the feed stream. The present work is focused on developing catalysts active in the presence of a gaseous stream richer in N2O, up to 20 vol%, both as powder and in structured configurations suitable for industrial application. With this aim, different nickel-cobalt mixed oxides (NixCo1−xCo2O4) were prepared, characterized, and tested. Subsequently, since alumina-based slurries assure successful deposition of the catalytic species on the structured carrier, a screening was performed on three nickel-cobalt-alumina mixed oxides. As the latter samples turned out to be excellent catalysts for the N2O decomposition reaction, the final catalytic formulation was transferred to a silicon carbide monolith. The structured catalyst led to the following very promising results: total N2O conversion and selectivity towards N2 and O2 were reached at 510 °C by feeding 20 vol% of N2O. It represents an important achievement in the view of developing a more concretely applicable catalytic system for industrial processes. Full article
Show Figures

Figure 1

11 pages, 2602 KiB  
Article
Experimental Investigation of Metal-Based Calixarenes as Dispersed Catalyst Precursors for Heavy Oil Hydrocracking
by Mohamed Ibrahim, Fahad A. Al-Zahrani, Francisco J. Diaz, Tareq Al-Attas, Hasan Zahir, Syed A. Ali, Mohammed Abdul Bari Siddiqui and Mohammad M. Hossain
Catalysts 2022, 12(10), 1255; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12101255 - 17 Oct 2022
Cited by 5 | Viewed by 1449
Abstract
Slurry-phase hydrocracking utilizing metal-containing oil-soluble compounds as precursors of dispersed catalysts is an effective approach for heavy oil upgrading. We propose applying metal-based p-tert-butylcalix[6]arene (TBC[6]s) organic species as dispersed catalyst precursors to enhance catalytic hydrogenation reactions involved in the upgrading of vacuum gas [...] Read more.
Slurry-phase hydrocracking utilizing metal-containing oil-soluble compounds as precursors of dispersed catalysts is an effective approach for heavy oil upgrading. We propose applying metal-based p-tert-butylcalix[6]arene (TBC[6]s) organic species as dispersed catalyst precursors to enhance catalytic hydrogenation reactions involved in the upgrading of vacuum gas oil (VGO). Co- and Ni-based TBC[6]s were synthesized and characterized by SEM-EDX, ICP, XRD, and FT-IR. The thermogravimetric and calorimetric behaviors of the synthesized complexes, which are key properties of dispersed hydrocracking catalysts, were also explored. The experimental evaluation of the synthesized catalyst precursors show that the synthesized metal-based TBC[6] catalyst precursors improved the catalytic hydrogenation reactions. A co-catalytic system was also investigated by adding a commercial, first-stage hydrocracking supported catalyst in addition to the dispersed catalysts. The naphtha yields increased from 10.7 wt.% for the supported catalyst to 11.7 wt.% and 12 wt.% after adding it along with Ni-TBC[6] and Co-TBC[6], respectively. Mixing the metal-based precursors resulted in elevated yields of liquid products due to the in situ generation of highly active Co–Ni bimetallic dispersed catalysts. Full article
Show Figures

Figure 1

17 pages, 2580 KiB  
Article
Impact of the Non-Uniform Catalyst Particle Size on Product Selectivities in Consecutive Reactions
by Juan Rafael García, Claudia María Bidabehere and Ulises Sedran
Catalysts 2022, 12(10), 1214; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12101214 - 12 Oct 2022
Viewed by 1110
Abstract
The analysis of consecutive reactions ABC in porous catalyst particles, where the simultaneous processes of diffusion and chemical reactions take place and both reactant and products are subjected to diffusion limitations, was performed for catalyst particles with non-uniform sizes, [...] Read more.
The analysis of consecutive reactions ABC in porous catalyst particles, where the simultaneous processes of diffusion and chemical reactions take place and both reactant and products are subjected to diffusion limitations, was performed for catalyst particles with non-uniform sizes, a fact that has not been considered so far. The system comprises first-order consecutive irreversible reactions that proceed on spherical catalyst particles with a log-normal volume particle size distribution (PSD), which is typical in many catalytic applications. Regardless of the prevailing diffusion regime (chemical control, transition situation or intraparticle diffusion control), the yield of the intermediate product (B) reaches a maximum value as a function of the conversion of reactant (A), then decreases as a consequence of the prevalence of the secondary reaction that converts it into the secondary product (C). If intraparticle diffusion resistances affect the reactant species, given the relationship between the kinetic constants and the mean particle size, the selectivity to the intermediate product is negatively affected by the dispersion in PSD. The larger the dispersion in PSD, the stronger the negative impact. Full article
Show Figures

Figure 1

18 pages, 4381 KiB  
Article
On a Response Surface Analysis: Hydrodeoxygenation of Phenol over a CoMoS-Based Active Phase
by Itzayana Pinzón-Ramos, Carlos O. Castillo-Araiza, Jesús Andrés Tavizón-Pozos and José Antonio de los Reyes
Catalysts 2022, 12(10), 1139; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12101139 - 28 Sep 2022
Cited by 1 | Viewed by 1466
Abstract
This work aims at assessing the hydrodeoxygenation (HDO) of phenol over a promising catalytic material: a CoMoS-based active phase with a Co/(Co + Mo) = 0.2, supported on a promising mixed oxide, Al2O3-TiO2 (Al/Ti = 2). Particularly, to [...] Read more.
This work aims at assessing the hydrodeoxygenation (HDO) of phenol over a promising catalytic material: a CoMoS-based active phase with a Co/(Co + Mo) = 0.2, supported on a promising mixed oxide, Al2O3-TiO2 (Al/Ti = 2). Particularly, to optimize the catalytic and kinetic performance of CoMoS/Al2O3-TiO2, a response surface methodology (RSM) is carried out by following a Box–Behnken experimental design. The response variables are the initial reaction rate and the reaction selectivity, determined via a proper contribution analysis (𝜑) of both the direct hydrodeoxygenation (DDO) and the hydrogenation (HYD). At the same time, the operating conditions used as factors are the reaction temperature (280–360 °C), the total pressure (3–5.5 MPa), and the Mo loading (10–15 wt.%). The activity and selectivity are correlated to the catalysts’ physicochemical properties determined by XRD, UV-Vis DRS, TPR, and Raman Spectroscopy. Regarding the CoMo-based active phase, a Mo loading of 12.5 wt.% leads to the optimal reaction performance, which is associated with the lowest (Co + Mo)oh/(Co + Mo)th ratio. Concerning the operating conditions, a temperature of 360 °C and a total pressure of 5.5 MPa give rise to the optimal initial reaction rates, in which the DDO (𝜑 = 65%) is selectively favored over HYD (𝜑 = 35%). Full article
Show Figures

Figure 1

21 pages, 4684 KiB  
Article
Heteropolyacid Incorporated Bifunctional Core-Shell Catalysts for Dimethyl Ether Synthesis from Carbon Dioxide/Syngas
by Birce Pekmezci Karaman, Nuray Oktar, Gülşen Doğu and Timur Dogu
Catalysts 2022, 12(10), 1102; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12101102 - 23 Sep 2022
Cited by 5 | Viewed by 1241
Abstract
Core-shell-type catalysts, which are synthesized by encapsulating the Cu-ZnO-Alumina type methanol synthesis catalyst (CZA) by silicotungstic acid (STA)-incorporated mesoporous alumina, were prepared following a hydrothermal route and tested in DME synthesis from syngas and CO2. Activity tests, which were performed in [...] Read more.
Core-shell-type catalysts, which are synthesized by encapsulating the Cu-ZnO-Alumina type methanol synthesis catalyst (CZA) by silicotungstic acid (STA)-incorporated mesoporous alumina, were prepared following a hydrothermal route and tested in DME synthesis from syngas and CO2. Activity tests, which were performed in the pressure range of 30–50 bar, and the temperature range of 200–300 °C, with different feed compositions (CO2/CO/H2: 50/-/50, 40/10/50, 25/25/50, 10/40/50) showed that the best-operating conditions for the highest DME yield were 275 °C and 50 bar. Results proved that the presence of CO2 in the syngas had a positive effect on the DME yield. The total conversion of CO + CO2 increased with an increase in CO2/CO ratio. An overall conversion of CO + CO2 and DME selectivity values were obtained as 65.6% and 73.2%, respectively, with a feed composition of H2/CO2/CO = 50/40/10. Synthesis of methanol using the CZA catalyst from the CO2-containing gas mixtures was also investigated, and the total conversion of CO + CO2 and methanol selectivity values of 32.0% and 83.6%, respectively, were obtained with the H2/CO2/CO = 50/40/10 gas mixture. Results proved that the new STA incorporated core-shell-type bifunctional catalysts were highly promising for the conversion of CO2-containing syngas to DME. Full article
Show Figures

Figure 1

17 pages, 1768 KiB  
Article
Hydrogen Pressure as a Key Parameter to Control the Quality of the Naphtha Produced in the Hydrocracking of an HDPE/VGO Blend
by Francisco J. Vela, Roberto Palos, Javier Bilbao, José M. Arandes and Alazne Gutiérrez
Catalysts 2022, 12(5), 543; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12050543 - 16 May 2022
Cited by 4 | Viewed by 2605
Abstract
The hydrocracking of high-density polyethylene (HDPE) blended with vacuum gas oil (VGO) has been studied to assess the effect of H2 pressure on the yield and composition of the products and with the aim of obtaining commercial fuels, mainly naphtha. The experiments [...] Read more.
The hydrocracking of high-density polyethylene (HDPE) blended with vacuum gas oil (VGO) has been studied to assess the effect of H2 pressure on the yield and composition of the products and with the aim of obtaining commercial fuels, mainly naphtha. The experiments have been performed using a PtPd/HY catalyst in a semibatch reactor under the following conditions: H2 pressure, 20–110 bar; 440 °C; catalyst to feed ratio, 0.1 gcat (gfeed)−1; HDPE to total feed ratio, 0.2 gHDPE (gfeed)−1; and reaction time, 2 h. The composition of the main fractions produced (gas, naphtha, and light cycle oil) reveals the interest in carrying out the process at 110 bar. Thus, conversions of 96 and 79% for the removal of heavy hydrocarbons and the removal of HDPE molecules have been obtained, respectively, together with a yield of naphtha of 53.4 wt%. This naphtha is mainly paraffinic, and it has a RON of 91.5 (within the commercial standards). Furthermore, three fractions have been observed in the analysis (temperature-programmed oxidation) of the coke. This analysis reveals that at 110 bar, the coke retained in the HY zeolite cages is less developed and burns at a moderate temperature. Full article
Show Figures

Figure 1

14 pages, 1679 KiB  
Article
Kinetic Model of Catalytic Steam Gasification of 2-Methoxy-4-methylphenol Using 5% Ni–0.25% Ru/γAl2O3 in a CREC-Riser Simulator
by Alán Rubén Calzada Hernandez, Benito Serrano Rosales and Hugo de Lasa
Catalysts 2022, 12(3), 282; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12030282 - 02 Mar 2022
Cited by 2 | Viewed by 1953
Abstract
Hydrogen is an energy vector with a great potential due its ample range of applications and clean combustion cycle. Hydrogen can be produced through biomass steam gasification, with novel catalysts being of significant value to implement this process. With this goal in mind, [...] Read more.
Hydrogen is an energy vector with a great potential due its ample range of applications and clean combustion cycle. Hydrogen can be produced through biomass steam gasification, with novel catalysts being of significant value to implement this process. With this goal in mind, in the present study, 5 wt % Ni/γAl2O3 promoted with 0.25 wt % Ru was synthesized and characterized. It is assumed that ruthenium facilitates hydrogen transfer to nickel oxide sites, promoting a hydrogen spillover effect, with the H2 adsorbed on Ru being transported to Ni sites. To describe chemical changes, the present study considers a kinetic model involving Langmuir–Hinshelwood-based rate equations, as a sum of independent reactions, with this being applied to the steam gasification of 2-methoxy-4-methylphenol (2M4MP). This tar biomass surrogate was studied in a fluidized CREC (Chemical Reactor Engineering Centre) Riser Simulator reactor, at different reaction times (5, 20 and 30 s.) and temperatures (550 °C, 600 °C and 650 °C). The proposed kinetics model was fitted to the experimentally observed H2, CO2, CO, CH4 and H2O concentrations, with the estimated pre-exponential factors and activation energies being in accordance with the reported literature data. It is anticipated that the postulated model could be of significant value for the modeling of other biomass conversion processes for hydrogen production using other supported catalysts. Full article
Show Figures

Graphical abstract

16 pages, 6339 KiB  
Article
Mixed Metal Oxides of M1 MoVNbTeOx and TiO2 as Composite Catalyst for Oxidative Dehydrogenation of Ethane
by Yuxin Chen, Dan Dang, Binhang Yan and Yi Cheng
Catalysts 2022, 12(1), 71; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12010071 - 09 Jan 2022
Cited by 5 | Viewed by 2104
Abstract
Composite catalysts of mixed metal oxides were prepared by mixing a phase-pure M1 MoVNbTeOx with anatase-phase TiO2. Two methods were used to prepare the composite catalysts (the simple physically mixed or sol-gel method) for the improvement of the catalytic performance [...] Read more.
Composite catalysts of mixed metal oxides were prepared by mixing a phase-pure M1 MoVNbTeOx with anatase-phase TiO2. Two methods were used to prepare the composite catalysts (the simple physically mixed or sol-gel method) for the improvement of the catalytic performance in the oxidative dehydrogenation of ethane (ODHE) process. The results showed that TiO2 particles with a smaller particle size were well dispersed on the M1 surface for the sol-gel method, which presented an excellent activity for ODHE. At the same operating condition (i.e., the contact time of 7.55 gcat·h/molC2H6 and the reaction temperature of 400 °C), the M1-TiO2-SM and M1-TiO2-PM achieved the space time yields of 0.67 and 0.52 kgC2H4/kgcat/h, respectively, which were about ~76% and ~35% more than that of M1 catalyst (0.38 kgC2H4/kgcat/h), respectively. The BET, ICP, XRD, TEM, SEM, H2-TPR, C2H6-TPSR, and XPS techniques were applied to characterize the catalysts. It was noted that the introduction of TiO2 raised the V5+ abundance on the catalyst surface as well as the reactivity of active oxygen species, which made contribution to the promotion of the catalytic performance. The surface morphology and crystal structure of used catalysts of either M1-TiO2-SM or M1-TiO2-PM remained stable as each fresh catalyst after 24 h time-on-stream tests. Full article
Show Figures

Graphical abstract

Review

Jump to: Research

28 pages, 52853 KiB  
Review
State-of-the-Art Review of Oxidative Dehydrogenation of Ethane to Ethylene over MoVNbTeOx Catalysts
by Yuxin Chen, Binhang Yan and Yi Cheng
Catalysts 2023, 13(1), 204; https://0-doi-org.brum.beds.ac.uk/10.3390/catal13010204 - 16 Jan 2023
Cited by 7 | Viewed by 3079
Abstract
Ethylene is mainly produced by steam cracking of naphtha or light alkanes in the current petrochemical industry. However, the high-temperature operation results in high energy demands, high cost of gas separation, and huge CO2 emissions. With the growth of the verified shale [...] Read more.
Ethylene is mainly produced by steam cracking of naphtha or light alkanes in the current petrochemical industry. However, the high-temperature operation results in high energy demands, high cost of gas separation, and huge CO2 emissions. With the growth of the verified shale gas reserves, oxidative dehydrogenation of ethane (ODHE) becomes a promising process to convert ethane from underutilized shale gas reserves to ethylene at a moderate reaction temperature. Among the catalysts for ODHE, MoVNbTeOx mixed oxide has exhibited superior catalytic performance in terms of ethane conversion, ethylene selectivity, and/or yield. Accordingly, the process design is compact, and the economic evaluation is more favorable in comparison to the mature steam cracking processes. This paper aims to provide a state-of-the-art review on the application of MoVNbTeOx catalysts in the ODHE process, involving the origin of MoVNbTeOx, (post-) treatment of the catalyst, material characterization, reaction mechanism, and evaluation as well as the reactor design, providing a comprehensive overview of M1 MoVNbTeOx catalysts for the oxidative dehydrogenation of ethane, thus contributing to the understanding and development of the ODHE process based on MoVNbTeOx catalysts. Full article
Show Figures

Figure 1

23 pages, 2553 KiB  
Review
Catalytic Dehydration of Isopropanol to Propylene
by Jean-Luc Dubois, Georgeta Postole, Lishil Silvester and Aline Auroux
Catalysts 2022, 12(10), 1097; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12101097 - 22 Sep 2022
Cited by 6 | Viewed by 4012
Abstract
Catalytic dehydration of isopropanol to propylene is a common reaction in laboratories to characterize the acid–base properties of catalysts. When acetone is produced, it is the sign of the presence of basic active sites, while propylene is produced on the acid sites. About [...] Read more.
Catalytic dehydration of isopropanol to propylene is a common reaction in laboratories to characterize the acid–base properties of catalysts. When acetone is produced, it is the sign of the presence of basic active sites, while propylene is produced on the acid sites. About 2/3rd of the world production of isopropanol is made from propylene, and the other third is made from acetone hydrogenation. Since the surplus acetone available on the market is mainly a coproduct of phenol synthesis, variations in the demand for phenol affect the supply position of acetone and vice versa. High propylene price and low demand for acetone should revive the industrial interest in acetone conversion. In addition, there is an increasing interest in the production of acetone and isopropanol from CO/CO2 via expected more environmentally friendly biochemical conversion routes. To preserve phenol process economics, surplus acetone should be recycled to propylene via the acetone hydrogenation and isopropanol dehydration routes. Some critical impurities present in petrochemical propylene are avoided in the recycling process. In this review, the selection criteria for the isopropanol dehydration catalysts at commercial scale are derived from the patent literature and analyzed with academic literature. The choice of the process conditions, such as pressure, temperature and gas velocity, and the catalysts’ properties such as pore size and acid–base behavior, are critical factors influencing the purity of propylene. Dehydration of isopropanol under pressure facilitates the downstream separation of products and the isolation of propylene to yield a high-purity “polymer grade”. However, it requires to operate at a higher temperature, which is a challenge for the catalyst’s lifetime; whereas operation at near atmospheric pressure, and eventually in a diluted stream, is relevant for applications that would tolerate a lower propylene purity (chemical grade). Full article
Show Figures

Graphical abstract

27 pages, 6263 KiB  
Review
The CREC Fluidized Riser Simulator a Unique Tool for Catalytic Process Development
by Hugo de Lasa
Catalysts 2022, 12(8), 888; https://0-doi-org.brum.beds.ac.uk/10.3390/catal12080888 - 12 Aug 2022
Cited by 4 | Viewed by 1839
Abstract
The CREC Riser Simulator is a mini-fluidized bench scale unit invented and implemented in 1992, at the CREC (Chemical Reactor Engineering Centre), University of Western Ontario The CREC Riser Simulator can be operated at short reaction times, in the 3 s to 20 [...] Read more.
The CREC Riser Simulator is a mini-fluidized bench scale unit invented and implemented in 1992, at the CREC (Chemical Reactor Engineering Centre), University of Western Ontario The CREC Riser Simulator can be operated at short reaction times, in the 3 s to 20 s range. The present review describes and evaluates the original basic concept of the 1992-CREC Riser Simulator Unit, and the improved design of the 2019-CREC Riser Simulator. Both the initial and the enhanced units are specially engineered to allow the rigorous assessment of both catalyst performance and catalytic reaction kinetics. Kinetic parameters of relatively simple and accurate mathematical models can be calculated using experimental data from the CREC Riser Simulator. Since its inception in 1992, the CREC Riser Simulator has been licensed to and manufactured for a significant number of universities and companies around the world. Several examples of scenarios where the CREC Riser Simulator can be employed to develop fluidized bed catalytic and heterogeneous reactor simulations are reported in this review. Among others, they include (a) hydrocarbon catalytic cracking, (b) the catalytic conversion of tar derived biomass chemical species, (c) steam and dry catalytic methane reforming, (d) the catalytic oxydehydrogenation of light paraffins, (e) the catalytic desulfurization of gasoline, and (f) biomass derived syngas combustion via chemical looping. In this review, special emphasis is given to the application of the CREC Riser Simulator to TIPB (tri-iso-propyl-benzene) catalytic cracking and the light paraffins catalytic oxydehydrogenation (PODH). Full article
Show Figures

Graphical abstract

Back to TopTop