Submit to Chemosensors Review for Chemosensors Propose a Special Issue

Journal Menu

Journal Browser

Low-Cost Chemo/Bio-Sensors Based on Nanomaterials

Print Special Issue Flyer
Special Issue Editors
Special Issue Information
Keywords
Published Papers

A special issue of Chemosensors (ISSN 2227-9040). This special issue belongs to the section "Materials for Chemical Sensing".

Deadline for manuscript submissions: closed (15 March 2024) | Viewed by 23804

Share This Special Issue

Special Issue Editors

Dr. Joana Rodrigues

E-Mail Website
Guest Editor

i3N & Department of Physics, University of Aveiro, 3810-193 Aveiro, Portugal
Interests: photoluminescence; persistent luminescence; nanomaterials; wide bandgap semiconductors; sensing; photocatalysis
Special Issues, Collections and Topics in MDPI journals

Dr. Nuno Santos

E-Mail Website
Guest Editor

i3N & Department of Physics, University of Aveiro, 3810-193 Aveiro, Portugal
Interests: sustainable materials; carbon nanostructures; transition metal oxides; physical and analytical electrochemistry; biosensors; energy-storage devices

Special Issue Information

Dear Colleagues,

In light of the serious health and climate crisis that the world has been facing, there is a remarkable rise in global awareness regarding the need for the continuous monitoring of disease indicators in our body, as well as the surrounding environment for viruses, bacteria, pollutant antibiotics, greenhouse gases, volatile organic compounds (VOCs), and so on. Hence, the field of sensing is a very active topic with great potential for further development, as sensors are indispensable for intelligent detection systems to assess chemical and biological information in air quality and emission control, water bodies monitoring, military and public security, food safety, and medical diagnosis. It is therefore imperative to develop low-cost and sustainable solutions for large-scale monitoring with high reliability, sensitivity, and selectivity. Reducing the production and operation cost of current state-of-the-art devices will boost their dissemination to the general population worldwide, providing crucial information to take preventive measures and swift mitigation actions.

In this context, nanomaterials constitute an auspicious platform for the fabrication of device-grade chemo/bio-sensors due to the unique properties that they offer in comparison to their bulk counterparts, with the additional benefit of promoting higher sensitivity and faster detection of multiple analytes. Engineering new functional nanomaterials that can be produced by low-cost techniques and that enable the precise control of electronic and structural properties is mandatory to optimize the performance of such devices, and to retrieve the required knowledge concerning the properties of these nanomaterials, as they dictate their sensing characteristics. Therefore, in this Special Issue we welcome papers focused on the production of low-cost and sustainable nanomaterials—in particular, semiconductors, metal oxides, carbon-based materials and nanocomposites, as well as their characterization and application in chemosensing and biosensing devices.

Dr. Joana Rodrigues
Dr. Nuno Santos
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Chemosensors is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

Metal oxides
Semiconductors
Carbon-based materials
Nanoparticles
Nanocomposites
New functional materials
Sustainable materials
Biosensors
Gas sensors
Chemical sensors

Published Papers (11 papers)

Download All Papers

Research

Jump to: Review

18 pages, 4242 KiB

Open AccessArticle

Low-Cost Carbon Paste Cu(II)-Exchanged Zeolite Amperometric Sensor for Hydrogen Peroxide Detection

by Delia Gligor, Sanda Andrada Maicaneanu and Codruta Varodi

Chemosensors 2024, 12(2), 23; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors12020023 - 04 Feb 2024

Viewed by 1165

Abstract

The aim of this work was to explore the possibility of using a Cu-exchanged zeolitic volcanic tuff (which is natural and easy to prepare and apply) for the preparation of a new low-cost carbon paste amperometric sensor for H₂O₂ detection. The properties of the zeolitic volcanic tuff were determined using chemical analysis, energy-dispersive X-ray spectroscopy, the specific surface area, electron microscopy, X-ray diffraction spectroscopy, and Fourier-transform infrared spectroscopy. The sensor was successfully built and operates at pH 7, at an applied potential of −150 mV Ag/AgCl/KCl_sat, presenting a sensitivity of 0.87 mA M⁻¹, a detection limit of 10 µM and a linear domain up to 30 mM H₂O₂. These good electroanalytic parameters for H₂O₂ detection (a low detection limit and high sensitivity) support the possibility of using these sensors for the detection of many analytes in environmental, food and medical applications. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

14 pages, 3865 KiB

Open AccessArticle

Water Vapor Condensation in Nanoparticle Films: Physicochemical Analysis and Application to Rapid Vapor Sensing

by Shinya Kano, Jin Kawakita, Shohei Yamashita and Harutaka Mekaru

Chemosensors 2023, 11(11), 564; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors11110564 - 14 Nov 2023

Viewed by 1514

Abstract

Nanomaterial-based humidity sensors hold great promise for water vapor detection because of their high sensitivity and fast response/recovery. However, the condensation of water in nanomaterial films remains unclear from a physicochemical perspective. Herein, the condensation of water vapor in silica nanoparticle films was physicochemically analyzed to bridge the abovementioned gap. The morphology of surface-adsorbed water molecules was characterized using infrared absorption spectroscopy and soft X-ray absorption spectroscopy, and the effect of RH on the amount of adsorbed water was observed using a quartz crystal microbalance. The adsorbed water was found to exist in liquid- and ice-like states, which contributed to high and low conductivity, respectively. The large change in film impedance above 80% RH was ascribed to the condensation of water between the nanoparticles. Moreover, RH alteration resulted in a colorimetric change in the film’s interference fringe. The obtained insights were used to construct a portable device with response and recovery times suitable for the real-time monitoring of water vapor. Thus, this study clarifies the structure of water adsorbed on nanomaterial surfaces and, hence, the action mechanism of the corresponding nanoparticle-based sensors, inspiring further research on the application of various nanomaterials to vapor sensing. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

14 pages, 3743 KiB

Open AccessArticle

Laser-Induced Graphene on Optical Fibre: Towards Simple and Cost-Effective Electrochemical/Optical Lab-on-Fibre Bioplatforms

by Laura L. Ferreira, Rafael A. Ribeiro, António J. S. Fernandes, Florinda M. Costa, Carlos Marques and Nuno F. Santos

Chemosensors 2023, 11(6), 338; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors11060338 - 07 Jun 2023

Cited by 4 | Viewed by 1333

Abstract

A 3D graphene foam made of interconnected multilayer graphene flakes was produced on optical fibres (OF) by laser-induced transformation of a polyimide (PI) film coated on the OF cladding. This material, known as laser-induced graphene (LIG), was explored in the electrochemical detection and quantification of dopamine (DA) at physiologically relevant concentrations in the presence of the most relevant interfering molecules in biological fluids, ascorbic acid (AA) and uric acid (UA). The measured limit of detection is 100 nM, the linear range is 0.1 to 5.0 μM and a maximum sensitivity of 5.0 µA µM⁻¹ cm⁻² was obtained for LIG decorated with Pt nanoparticles (NPs). Moreover, immunity to AA and UA interference and to fouling was attained by decorating the LIG electrode with Pt NPs and coating it with Nafion. These figures of merit underline the potential of these sensors for the quantification of physiologically relevant concentrations of DA in biological fluids, paving the way for the development of hybrid electrochemical/optical sensing actuating platforms in a lab-on-fibre configuration, with relevant applications in biomedical engineering. The advantages of this hybrid arrangement include the possibility of in situ counterproofing, extended measuring ranges, photoelectrochemical detection and the probing of inaccessible places. This elegant approach can also provide a simple and cost-effective way to fabricate biomedical devices with extended functionality, such as medical optical probes with added electrochemical capabilities and optogenetics combined with local electrochemical detection, among others. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

18 pages, 6192 KiB

Open AccessArticle

Synthesis of Flower-like ZnO and Its Enhanced Sensitivity towards NO₂ Gas Detection at Room Temperature

by Zhicheng Cai, Jiho Park and Sunghoon Park

Chemosensors 2023, 11(6), 322; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors11060322 - 01 Jun 2023

Cited by 2 | Viewed by 1099

Abstract

A flower-like ZnO was successfully synthesized via a simple chemical precipitation method at room temperature (RT) in distilled water, without the use of any catalysts or substrates. The sample’s structure was analyzed using various techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (FETEM), and X-ray photoelectron spectroscopy (XPS), which confirmed its hexagonal structure. UV–visible optical absorption measurements also revealed the presence of UV absorption at 365 nm. A reasonable growth mechanism for the formation of flower-like ZnO was proposed based on these analyses. The response of the sample to low concentrations of NO₂ (1 ppm) was evaluated at different calcination temperatures, and the results showed that the best response was achieved when the sample was calcined at 600 °C. The flower-like ZnO sample labeled as 6ZnO showed the highest response of 54.18 when exposed to 1 ppm of NO₂ gas at RT. Additionally, 6ZnO exhibited good response and recovery properties of 11 s and 93 s, respectively, at low concentrations of NO₂ at 1 ppm. The gas sensing mechanism and the mechanism of the enhanced gas response of the flower-like ZnO are discussed. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

13 pages, 2379 KiB

Open AccessArticle

Effect of Channel Radius on Fluorescent Nanoparticle Based Molecular Communication

by Federico Calì, Luca Fichera and Nunzio Tuccitto

Chemosensors 2022, 10(1), 29; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors10010029 - 11 Jan 2022

Cited by 2 | Viewed by 2137

Abstract

The effect of the communication channel size on the transport and subsequent detection of chemical messengers is investigated on millimetric and micrometric channels. The transport of the information carriers, being characterized by an advective and a diffusive contribution, was simulated by varying the flow velocity and the diffusion coefficient. Then, to evaluate the information quality, the Intersymbol Interference (ISI) between two consecutive signals at a specific release delay was estimated. This allowed us to verify that operating under micrometric channel conditions has a larger flow velocity range to obtain completely separated successive signals and smaller release delays can be used between signals. The theoretical results were confirmed by developing a prototype molecular communication platform operating under microfluidic conditions, which enables communication through fluorescent nanoparticles, namely Carbon Quantum Dots (CQDs). Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

Review

Jump to: Research

20 pages, 6854 KiB

Open AccessReview

A Review on Metal Oxide Semiconductor-Based Chemo-Resistive Ethylene Sensors for Agricultural Applications

by Kongcan Hu, Yahan Cai, Ziru Wang, Zhengwei Zhang, Jieyu Xian and Cheng Zhang

Chemosensors 2024, 12(1), 13; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors12010013 - 12 Jan 2024

Viewed by 1443

Abstract

Ethylene, an important phytohormone, significantly influences plant growth and the ripeness of fruits and vegetables. During the transportation and storage of agricultural products, excessive ethylene can lead to economic losses due to rapid deterioration. Metal oxide semiconductor (MOS)-based chemo-resistive sensors are a promising technology for the detection of ethylene due to their low cost, high sensitivity, portability, etc. This review comprehensively summarizes the materials, fabrications, agricultural applications, and sensing mechanisms of these sensors. Moreover, the current challenges are highlighted and the potential solutions are proposed. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

38 pages, 6404 KiB

Open AccessReview

Fiber-Optic Nanosensors for Chemical Detection

by Vlastimil Matějec, Ivan Kašík and Ivo Bartoň

Chemosensors 2023, 11(10), 521; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors11100521 - 04 Oct 2023

Viewed by 2109

Abstract

Recently, rapid progress has been achieved in the field of nanomaterial preparation and investigation. Many nanomaterials have been employed in optical chemical sensors and biosensors. This review is focused on fiber-optic nanosensors for chemical sensing based on silica and plastic optical fibers. Four types of fiber-optic chemical nanosensors, namely fiber nanotip sensors, fiber nanoarray sensors, fiber-optic surface plasmon resonance sensors, and fiber-optic nanomaterial-based sensors, are discussed in the paper. The preparation, materials, and sensing characteristics of the selected fiber-optic nanosensors are employed to show the performance of such nanosensors for chemical sensing. Examples of fiber-optic nanobiosensors are also included in the paper to document the broad sensing performance of fiber-optic nanosensors. The employment of fiber-nanotips and nanoarrays for surface-enhanced Raman scattering and nanosensors employing both electrical and optical principles and “Lab-on-fiber” sensors are also included in the paper. The paper deals with fiber-optic nanosensors based on quantum dots, nanotubes, nanorods, and nanosheets of graphene materials, MoS₂, and MXenes. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

27 pages, 16739 KiB

Open AccessReview

Micro/Nano Soft Film Sensors for Intelligent Plant Systems: Materials, Fabrications, and Applications

by Qin Jiang, Zhiping Chai, Zisheng Zong, Zhitong Hu, Shuo Zhang and Zhigang Wu

Chemosensors 2023, 11(3), 197; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors11030197 - 19 Mar 2023

Viewed by 1979

Abstract

Being abundant as natural intelligence, plants have attracted huge attention from researchers. Soft film sensors present a novel and promising approach to connect plants with artificial devices, helping us to investigate plants’ intelligence further. Here, recent developments for micro/nano soft film sensors that can be used for establishing intelligent plant systems are summarized, including essential materials, fabrications, and application scenarios. Conductive metals, nanomaterials, and polymers are discussed as basic materials for active layers and substrates of soft film sensors. The corresponding fabrication techniques, such as laser machining, printing, coating, and vapor deposition, have also been surveyed and discussed. Moreover, by combining soft film sensors with plants, applications for intelligent plant systems are also investigated, including plant physiology detection and plant-hybrid systems. Finally, the existing challenges and future opportunities are prospected. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

23 pages, 4577 KiB

Open AccessReview

Metal Oxide Semiconductor Nanostructure Gas Sensors with Different Morphologies

by Ali Mirzaei, Hamid Reza Ansari, Mehrdad Shahbaz, Jin-Young Kim, Hyoun Woo Kim and Sang Sub Kim

Chemosensors 2022, 10(7), 289; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors10070289 - 21 Jul 2022

Cited by 38 | Viewed by 3265

Abstract

There is an increasing need for the development of low-cost and highly sensitive gas sensors for environmental, commercial, and industrial applications in various areas, such as hazardous gas monitoring, safety, and emission control in combustion processes. Considering this, resistive-based gas sensors using metal oxide semiconductors (MOSs) have gained special attention owing to their high sensing performance, high stability, and low cost of synthesis and fabrication. The relatively low final costs of these gas sensors allow their commercialization; consequently, they are widely used and available at low prices. This review focuses on the important MOSs with different morphologies, including quantum dots, nanowires, nanofibers, nanotubes, hierarchical nanostructures, and other structures for the fabrication of resistive gas sensors. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Figure 1

29 pages, 6262 KiB

Open AccessReview

High-Performance Room-Temperature Conductometric Gas Sensors: Materials and Strategies

by Antonio Vázquez-López, Javier Bartolomé, Ana Cremades and David Maestre

Chemosensors 2022, 10(6), 227; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors10060227 - 15 Jun 2022

Cited by 8 | Viewed by 2899

Abstract

Chemiresistive sensors have gained increasing interest in recent years due to the necessity of low-cost, effective, high-performance gas sensors to detect volatile organic compounds (VOC) and other harmful pollutants. While most of the gas sensing technologies rely on the use of high operation temperatures, which increase usage cost and decrease efficiency due to high power consumption, a particular subset of gas sensors can operate at room temperature (RT). Current approaches are aimed at the development of high-sensitivity and multiple-selectivity room-temperature sensors, where substantial research efforts have been conducted. However, fewer studies presents the specific mechanism of action on why those particular materials can work at room temperature and how to both enhance and optimize their RT performance. Herein, we present strategies to achieve RT gas sensing for various materials, such as metals and metal oxides (MOs), as well as some of the most promising candidates, such as polymers and hybrid composites. Finally, the future promising outlook on this technology is discussed. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures

Graphical abstract

33 pages, 5700 KiB

Open AccessReview

ZnO Transducers for Photoluminescence-Based Biosensors: A Review

by Joana Rodrigues, Sónia O. Pereira, Julia Zanoni, Carolina Rodrigues, Mariana Brás, Florinda M. Costa and Teresa Monteiro

Chemosensors 2022, 10(2), 39; https://0-doi-org.brum.beds.ac.uk/10.3390/chemosensors10020039 - 21 Jan 2022

Cited by 12 | Viewed by 3387

Abstract

Zinc oxide (ZnO) is a wide bandgap semiconductor material that has been widely explored for countless applications, including in biosensing. Among its interesting properties, its remarkable photoluminescence (PL), which typically exhibits an intense signal at room temperature (RT), arises as an extremely appealing alternative transduction approach due to the high sensitivity of its surface properties, providing high sensitivity and selectivity to the sensors relying on luminescence output. Therefore, even though not widely explored, in recent years some studies have been devoted to the use of the PL features of ZnO as an optical transducer for detection and quantification of specific analytes. Hence, in the present paper, we revised the works that have been published in the last few years concerning the use of ZnO nanostructures as the transducer element in different types of PL-based biosensors, namely enzymatic and immunosensors, towards the detection of analytes relevant for health and environment, like antibiotics, glucose, bacteria, virus or even tumor biomarkers. A comprehensive discussion on the possible physical mechanisms that rule the optical sensing response is also provided, as well as a warning regarding the effect that the buffer solution may play on the sensing experiments, as it was seen that the use of phosphate-containing solutions significantly affects the stability of the ZnO nanostructures, which may conduct to misleading interpretations of the sensing results and unreliable conclusions. Full article

(This article belongs to the Special Issue Low-Cost Chemo/Bio-Sensors Based on Nanomaterials)

► Show Figures