Advances in Wireless Networks and Mobile Systems

A special issue of Electronics (ISSN 2079-9292). This special issue belongs to the section "Networks".

Deadline for manuscript submissions: closed (10 February 2023) | Viewed by 28994

Special Issue Editors


E-Mail Website
Guest Editor
Integrated Management Coastal Research Institute, Universitat Politecnica de Valencia, 46022 Valencia, Spain
Interests: network protocols; network algorithms; wireless sensor networks; ad hoc networks; multimedia streaming
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

This Special Issue will include a selection of papers covering topics related with wireless networks and mobile technologies. There will be specific emphasis on wireless and mobile technologies, mobile software and services, wireless optical communications, cyberphysical systems, and e-health monitoring.

Wireless networking represents the main network access of current Information Technologies systems, providing communication support for mobile devices. This Special Issue welcomes recent advances in wireless networks and mobile systems ranging from practical issues, including large-scale implementations, to the more abstract theoretical aspects of wireless communication. The main areas of this Special Issue include but are not limited to wireless and mobile technologies, mobile software and services, wireless optical communications, cyberphysical systems, and e-health monitoring. These concepts fundamentally change the paradigms used in traditional networking, information systems, and information technology. Many other topics are included in the scope of WINSYS. This Special Issue also welcomes scholars to publish the extended versions of their papers from the "18th International Conference on Wireless Networks and Mobile Systems (WINSYS 2021)”.

Prof. Dr. Jaime Lloret
Prof. Dr. Joel J. P. C. Rodrigues
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Electronics is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Cellular networks, 4G, 5G, 6G
  • Wi-Fi, WiMAX, Bluetooth, Zigbee
  • VANETs
  • Cognitive networks
  • Wireless networks
  • SDN
  • Wireless coverage
  • Localization and positioning techniques
  • Body area networks
  • E-health monitoring
  • Cloud computing
  • Edge computing
  • P2P and content delivery networks
  • QoS and QoE in wireless networks
  • Wireless optical communications
  • Wireless sensor networks
  • IoT
  • Ambient Assisted Living
  • Security in Wireless Networks

Published Papers (16 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

20 pages, 1356 KiB  
Article
Secrecy Outage Performance and Power Allocation for Three Secondary Users CR-NOMA Networks with Transmit Antenna Selection
by Shuo Lv and Jianbo Ji
Electronics 2023, 12(8), 1896; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12081896 - 17 Apr 2023
Cited by 2 | Viewed by 896
Abstract
Cognitive radio inspired non-orthogonal multiple access (CR-NOMA) networks are a research focus in the wireless communication field. The secure communication of wireless networks has become a pressing issue due to the openness of the wireless channel. Multiple-antenna technology can enhance the secrecy performance [...] Read more.
Cognitive radio inspired non-orthogonal multiple access (CR-NOMA) networks are a research focus in the wireless communication field. The secure communication of wireless networks has become a pressing issue due to the openness of the wireless channel. Multiple-antenna technology can enhance the secrecy performance in CR-NOMA networks, thus we propose a multiple-input-single-output (MISO) CR-NOMA network where the base station (BS) is equipped with multiple antennas, while others have a single antenna in the paper. The BS serves three secondary users in the presence of an eavesdropper and a primary user. We propose two transmit antenna selection (TAS) schemes, namely the space-time transmission (ST) scheme and the maximum channel capacity (MCC) scheme, respectively. Firstly, we obtain an exact closed-form expression for the secrecy outage probability (SOP) of three secondary users and the overall SOP of the networks with the two schemes, respectively. To gain further insights, the present study analyzes the asymptotic SOP performance to analyze the relationship between the network parameters and secrecy outage performance. Based on this, we propose a power allocation algorithm to further improve the secrecy outage performance of the networks. Finally, we verify the analyses with Monte Carlo simulations. The numerical and simulation results demonstrate that: (1) The MCC scheme outperforms the ST scheme on the secrecy outage performance. (2) The proposed power allocation algorithm optimizes the secrecy outage performance of the networks. (3) There exists a sole respective optimal power allocation factor for a BS different transmission power. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

11 pages, 1199 KiB  
Article
Reliable Resource Allocation and Management for IoT Transportation Using Fog Computing
by Haseeb Ullah Atiq, Zulfiqar Ahmad, Sardar Khaliq uz Zaman, Muhammad Amir Khan, Asad Ali Shaikh and Amal Al-Rasheed
Electronics 2023, 12(6), 1452; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12061452 - 19 Mar 2023
Cited by 10 | Viewed by 1676
Abstract
Resource allocation in smart settings, more specifically in Internet of Things (IoT) transportation, is challenging due to the complexity and dynamic nature of fog computing. The demands of users may alter over time, necessitating more trustworthy resource allocation and administration. Effective resource allocation [...] Read more.
Resource allocation in smart settings, more specifically in Internet of Things (IoT) transportation, is challenging due to the complexity and dynamic nature of fog computing. The demands of users may alter over time, necessitating more trustworthy resource allocation and administration. Effective resource allocation and management systems must be designed to accommodate changing user needs. Fog devices don’t just run fog-specific software. Resource and link failures could be brought on by the absence of centralised administration, device autonomy, and wireless communication in the fog environment. Resources must be allocated and managed effectively because the majority of fog devices are battery-powered. Latency-aware IoT applications, such as intelligent transportation, healthcare, and emergency response, are now pervasive as a result of the enormous growth of ubiquitous computing. These services generate a large amount of data, which requires edge processing. The flexibility and services on-demand for the cloud can successfully manage these applications. It’s not always advisable to manage IoT applications exclusively in the cloud, especially for latency-sensitive applications. Thus, fog computing has emerged as a bridge between the cloud and the devices it supports. This is typically how sensors and IoT devices are connected. These neighbouring Fog devices control storage and intermediary computation. In order to improve the Fog environment reliability in IoT-based systems, this paper suggests resource allocation and management strategy. When assigning resources, latency and energy efficiency are taken into account. Users may prioritise cost-effectiveness over speed in a fog. Simulation was performed in the iFogSim2 simulation tool, and performance was compared with one of the existing state-of-the-art strategy. A comparison of results shows that the proposed strategy reduced latency by 10.3% and energy consumption by 21.85% when compared with the existing strategy. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

16 pages, 995 KiB  
Article
Joint Spectrum and Power Allocation with User Association for 5G/Wi-Fi Coexisting Millimeter Wave Networks
by Yuxuan Xie, Danpu Liu and Fangfang Yin
Electronics 2023, 12(4), 959; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12040959 - 15 Feb 2023
Viewed by 1153
Abstract
With the exponential growth of mobile data traffic, the deployment of a large number of devices in the hot-spot gathering scenario has brought great challenges to the current wireless communication network. Considering that the user service latency of unidirectional data offloading scheme is [...] Read more.
With the exponential growth of mobile data traffic, the deployment of a large number of devices in the hot-spot gathering scenario has brought great challenges to the current wireless communication network. Considering that the user service latency of unidirectional data offloading scheme is still unacceptable when 5G and Wi-Fi coexist on the unlicensed 60 GHz band, we investigate a bidirectional data offloading scheme with resource allocation in this study. More specifically, aggregation nodes (ANs) are deployed in the coverage of Wi-Fi AP to receive multi-user data in parallel in order to reduce the collision probability of transmitted packets. Then, we formulate an optimization problem aiming to maximize the sum rate through spectrum and power allocation as well as user association. The problem is then decomposed into three sub-problems and solved successively, where RSSI (received signal strength indicator) as the standard determines the user association, while the algorithms of multi-stage matching and successive convex approximation are used for solving spectrum allocation and power allocation, respectively. Simulation results demonstrate that the proposed algorithm can effectively increase the total capacity of the uplink coexisting networks. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

16 pages, 2889 KiB  
Article
Enhancing NOMA’s Spectrum Efficiency in a 5G Network through Cooperative Spectrum Sharing
by Mohamed Hassan, Manwinder Singh, Khalid Hamid, Rashid Saeed, Maha Abdelhaq, Raed Alsaqour and Nidhal Odeh
Electronics 2023, 12(4), 815; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12040815 - 06 Feb 2023
Cited by 9 | Viewed by 1806
Abstract
Non-orthogonal multiple access (NOMA) is one of the most effective techniques for meeting the spectrum efficiency (SE) requirements of 5G and beyond networks. This paper presents two novel methods for improving the SE of the downlink (DL) NOMA power domain (PD) integrated with [...] Read more.
Non-orthogonal multiple access (NOMA) is one of the most effective techniques for meeting the spectrum efficiency (SE) requirements of 5G and beyond networks. This paper presents two novel methods for improving the SE of the downlink (DL) NOMA power domain (PD) integrated with a cooperative cognitive radio network (CCRN) in a 5G network using single-input and single-output (SISO), multiple-input and multiple-output (MIMO), and massive MIMO (M-MIMO) in the same network and in a single cell. In the first method, NOMA users compete for free channels in a competing channel (C-CH) on the CCRN. The second method provides NOMA users with a dedicated channel (D-CH) with high priority. The proposed methods are evaluated using the Matlab software program using the three scenarios with different distances, power location coefficients, and transmitting power. Four users are assumed to operate on 80 MHz bandwidths (BWs) and use the quadrature phase shift keying (QPSK) modulation technique in all three scenarios. Successive interference cancellation (SIC) and unstable channel conditions are also considered when evaluating the performance of the proposed system under the assumption of frequency selective Rayleigh fading. The best four-user SE performance obtained by user U4 was 3.9 bps/Hz/cell for SISO DL NOMA, 5.1 bps/Hz/cell for SISO DL NOMA with CCRN with C-CH, and 7.2 bps/Hz/cell for SISO DL NOMA with CCRN with D-CH at 40 dBm transmit power. While 64 × 64 MIMO DL NOMA improved SE performance of the best-use U4 by 51%, 64 × 64 MIMO DL NOMA with C-CH CCRN enhanced SE performance by 64%, and 64 × 64 MIMO DL NOMA with D-CH CCRN boosted performance by 65% SE compared to SISO DL NOMA at 40 dB transmit power. While 128 × 128 M-MIMO DL NOMA improved SE performance for the best U4 user by 79%, 128 × 128 M-MIMO DL NOMA with C-CH CCRN boosted SE performance by 85%, and 128 × 128 M-MIMO DL NOMA with D-CH CCRN enhanced SE performance by 86% when compared to SISO DL NOMA SE performance at 40 dB transmit power. We discovered that the second proposed method, when using D-CH with CCR-NOMA, produced the best SE performance for users. On the other hand, the spectral efficiency is significantly increased when applying MIMO and M-MIMO techniques. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

14 pages, 1927 KiB  
Article
Energy-Aware Next-Generation Mobile Routing Chains with Fog Computing for Emerging Applications
by Khalid Haseeb, Fahad A. Alzahrani, Mohammad Siraj, Zahid Ullah and Jaime Lloret
Electronics 2023, 12(3), 574; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12030574 - 23 Jan 2023
Cited by 2 | Viewed by 1417
Abstract
The Internet of Things (IoT) provides robust services to connected sensors in a distributed manner, and maintains real-time communication using wireless standards. The smart network has offered many autonomous smart systems to collect information from remote nodes, and share it by exploring the [...] Read more.
The Internet of Things (IoT) provides robust services to connected sensors in a distributed manner, and maintains real-time communication using wireless standards. The smart network has offered many autonomous smart systems to collect information from remote nodes, and share it by exploring the network layer. Researchers have recently offered a variety of ways to increase the effectiveness of emerging applications using trustworthy relaying systems. However, there are still many issues with route reformulation due to frequent disconnections of mobile devices and resource limitations. Furthermore, most of the existing methods for IoT systems are unable to utilize network resources, which lowers the performance of green networks. Thus, providing a foolproof solution for the autonomous system with energy efficiency is a challenging task. Therefore, this paper presents an algorithm for the mobile network using fog computing to reduce network disconnectivity. Furthermore, using security services, the proposed algorithm efficiently explores the characteristics of the device, and avoids malicious traffic to drain the additional energy consumption of the network. The main aspects of the proposed algorithm are as follows: (i) using the adjustable transmission power, the proposed algorithm offers a fault-tolerant solution to transmit the aggregated data over the unpredictable wireless system; (ii) with the support of fog nodes, the data load is reduced among devices with the offering of a secured authentication scheme. Using simulations, the proposed algorithm is tested, and its significance is demonstrated against other related studies. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

18 pages, 2650 KiB  
Article
Methodological Proposal for the Analysis of Urban Mobility Using Wi-Fi Data and Artificial Intelligence Techniques: The Case of Palma
by Pau Salas, Vicente Ramos, Maurici Ruiz-Pérez and Bartomeu Alorda-Ladaria
Electronics 2023, 12(3), 504; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12030504 - 18 Jan 2023
Viewed by 1280
Abstract
Knowing and modeling mobility in smart city spaces is important for both planning and managing city resources. The optimization of public resources and the improvement of their management are some of the main concerns in the development of sustainable urban development policies. This [...] Read more.
Knowing and modeling mobility in smart city spaces is important for both planning and managing city resources. The optimization of public resources and the improvement of their management are some of the main concerns in the development of sustainable urban development policies. This study proposes the application of several artificial intelligence methodologies to support mobility planning based on data provided by public Wi-Fi infrastructures in the city. Considering that Wi-Fi networks provide high-frequency data about the devices under their coverage radius, three classification techniques are proposed: by frequency of occurrence of the devices, by estimation of the mode of transport, and by estimation of the most common travel routes. As a case study, the city of Palma (Mallorca, Spain), an international tourist destination where mobility is of singular importance, is selected. This study shows the results obtained from a Wi-Fi network with wide coverage that is integrated into the urban space. It provides novel and updatable information on the mobility model of the city by taking advantage of public high-frequency monitoring resources. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

23 pages, 1386 KiB  
Article
Hybrid PDA/FIR Filtering for Indoor Localization Using Wireless Sensor Networks
by Jung Min Pak
Electronics 2023, 12(1), 180; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12010180 - 30 Dec 2022
Cited by 1 | Viewed by 1355
Abstract
Indoor localization systems using wireless sensor networks (WSNs) are widely used to track the positions of workers, robots, and equipment. In indoor spaces, the occasional obstruction of radio propagation by physical objects such as furniture, appliances, and humans is referred to as the [...] Read more.
Indoor localization systems using wireless sensor networks (WSNs) are widely used to track the positions of workers, robots, and equipment. In indoor spaces, the occasional obstruction of radio propagation by physical objects such as furniture, appliances, and humans is referred to as the non-line-of-sight (NLOS) problem and has been a challenge for indoor localization. In this study, a new indoor localization algorithm to overcome the NLOS problem is proposed. We propose a new method to use redundant fixed nodes and nearest neighbor (NN) measurements, which increases the probability of avoiding NLOS-contaminated measurements. In addition, we propose a novel localization algorithm that can handle the contaminated measurements as clutters. The proposed algorithm is based on the hybrid filtering structure in which probabilistic data association (PDA) filter and a finite impulse response (FIR) filter are used as main and assisting filters, respectively. We adopt the extended minimum variance FIR (EMVF) filter as an assisting FIR filter, which recovers the main PDA filter from failures. Thus, the resulting filter is referred to as hybrid PDA/FIR filter (HPFF). Extensive simulations using an indoor localization scenario in a long corridor were performed for evaluation of the proposed localization algorithm. The EKF using NN measurements improves localization accuracy under temporary NLOS conditions, and the PDA filter further enhances the localization accuracy of EKF. However, EKF and PDA filter cannot completely overcome NLOS problem and exhibit significant increase in errors under certain conditions. The HPFF produced localization accuracy with the root time-averaged mean square (RTAMS) position error under 0.4 m and did not fail under NLOS conditions. The accurate and reliable localization performance of HPFF was demonstrated in comparison with the EKF and PDA filter through extensive WSN-based indoor localization simulations. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

16 pages, 4904 KiB  
Article
Building Penetration Losses at 3.5 GHz: Dependence on Polarization and Incidence Angle
by Manuel García Sánchez, Carlos Iglesias, Iñigo Cuiñas and Isabel Expósito
Electronics 2023, 12(1), 106; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12010106 - 27 Dec 2022
Cited by 1 | Viewed by 2443
Abstract
We measured and analyzed the building penetration losses for four different kinds of facades as a function of the incidence angle and polarization at 3.5 GHz, which is a frequency of interest for fifth generation (5G) communication systems. Results show that the attenuation [...] Read more.
We measured and analyzed the building penetration losses for four different kinds of facades as a function of the incidence angle and polarization at 3.5 GHz, which is a frequency of interest for fifth generation (5G) communication systems. Results show that the attenuation may vary up to 8 dB with the incidence angle, which justifies the need for an angular characterization of the penetration losses, going beyond the simpler characterization used for normal incidence. We also found that there is a relevant polarization dependence of this attenuation, as electromagnetic theory predicts for wave transmission across flat discontinuities and even across flat dielectric slabs. Results would be of interest for the network design of future 5G base stations using orthogonal polarizations. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

13 pages, 3767 KiB  
Article
Performance of Fuzzy Inference System for Adaptive Resource Allocation in C-V2X Networks
by Teguh Indra Bayu, Yung-Fa Huang and Jeang-Kuo Chen
Electronics 2022, 11(23), 4063; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics11234063 - 06 Dec 2022
Cited by 2 | Viewed by 1238
Abstract
Mode 4 of 3GPP Cellular Vehicle-to-Everything (C-V2X) uses a new Sensing-Based Semi-Persistent Scheduling (SB-SPS) algorithm to manage its radio resources. SB-SPS applies a probabilistic approach to provide the resource allocation in the system. The resource keep probability (Prk) variable [...] Read more.
Mode 4 of 3GPP Cellular Vehicle-to-Everything (C-V2X) uses a new Sensing-Based Semi-Persistent Scheduling (SB-SPS) algorithm to manage its radio resources. SB-SPS applies a probabilistic approach to provide the resource allocation in the system. The resource keep probability (Prk) variable plays an essential role in the resource allocation mechanism. Most of the previous works used a fixed Prk value. However, the Packet Delivery Ratio (PDR) can be improved by adapting the optimal Prk value. Hence, we propose a Fuzzy Inference System (FIS) with two inputs, distance, and Channel State Information (CSI) to determine the suitable Prk. The simulation results show that the proposed FIS method outperforms the other methods for sparse and congested road scenarios, with total numbers of vehicles at 200 and 400, respectively. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

19 pages, 8567 KiB  
Article
Driving Assistance System for Ambulances to Minimise the Vibrations in Patient Cabin
by Abdulaziz Aldegheishem, Nabil Alrajeh, Lorena Parra, Oscar Romero and Jaime Lloret
Electronics 2022, 11(23), 3965; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics11233965 - 30 Nov 2022
Cited by 3 | Viewed by 1535
Abstract
The ambulance service is the main transport for diseased or injured people which suffers the same acceleration forces as regular vehicles. These accelerations, caused by the movement of the vehicle, impact the performance of tasks executed by sanitary personnel, which can affect patient [...] Read more.
The ambulance service is the main transport for diseased or injured people which suffers the same acceleration forces as regular vehicles. These accelerations, caused by the movement of the vehicle, impact the performance of tasks executed by sanitary personnel, which can affect patient survival or recovery time. In this paper, we have trained, validated, and tested a system to assess driving in ambulance services. The proposed system is composed of a sensor node which measures the vehicle vibrations using an accelerometer. It also includes a GPS sensor, a battery, a display, and a speaker. When two possible routes reach the same destination point, the system compares the two routes based on previously classified data and calculates an index and a score. Thus, the index balances the possible routes in terms of time to reach the destination and the vibrations suffered in the patient cabin to recommend the route that minimises those vibrations. Three datasets are used to train, validate, and test the system. Based on an Artificial Neural network (ANN), the classification model is trained with tagged data classified as low, medium, and high vibrations, and 97% accuracy is achieved. Then, the obtained model is validated using data from three routes of another region. Finally, the system is tested in two new scenarios with two possible routes to reach the destination. The results indicate that the route with less vibration is preferred when there are low time differences (less than 6%) between the two possible routes. Nonetheless, with the current weighting factors, the shortest route is preferred when time differences between routes are higher than 20%, regardless of the higher vibrations in the shortest route. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

21 pages, 11935 KiB  
Article
Performance Evaluation of an On-Body Wireless Body Network Based on an Ultra-Wideband Physical Layer under a Dynamic Channel Model
by Kento Takabayashi, Hirokazu Tanaka and Katsumi Sakakibara
Electronics 2022, 11(21), 3491; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics11213491 - 27 Oct 2022
Viewed by 1250
Abstract
Wireless body area networks (WBANs) are attracting attention as an important technology for realizing the Internet of Medical Things (IoMT). In addition, ultra-wideband (UWB) is one of the wireless communication technologies suitable for the IoMT and WBANs. Our previous study investigated the feasibility [...] Read more.
Wireless body area networks (WBANs) are attracting attention as an important technology for realizing the Internet of Medical Things (IoMT). In addition, ultra-wideband (UWB) is one of the wireless communication technologies suitable for the IoMT and WBANs. Our previous study investigated the feasibility of WBANs utilizing UWB under ideal and static wearable WBAN channel models. The present research applies a dynamic on-body UWB channel model to a WBAN as a more realistic channel model. The feasibility of a high-reliability UWB-WBAN is demonstrated by evaluating the physical layer performance. Numerical results reveal the maximum number of retransmissions needed to achieve the desired transmission failure ratio for each link type and the corresponding energy efficiency and average number of retransmissions. These findings contribute to the realization of a highly reliable IoMT utilizing UWB-WBANs in a practical environment. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Graphical abstract

15 pages, 1918 KiB  
Article
Research on Interference Coordination Optimization Strategy for User Fairness in NOMA Heterogeneous Networks
by Zhihao Yu and Jia Hou
Electronics 2022, 11(11), 1700; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics11111700 - 26 May 2022
Cited by 3 | Viewed by 1231
Abstract
In order to comprehensively improve the performance of edge users in heterogeneous cellular networks and the fairness of network users, a downlink interference coordination optimization strategy in heterogeneous cellular networks with non-orthogonal multiple access (NOMA) based on the cell range expansion (CRE) and [...] Read more.
In order to comprehensively improve the performance of edge users in heterogeneous cellular networks and the fairness of network users, a downlink interference coordination optimization strategy in heterogeneous cellular networks with non-orthogonal multiple access (NOMA) based on the cell range expansion (CRE) and the almost blank subframe (ABS) technology is proposed. Different from the traditional interference coordination strategy, a NOMA user pairing scheme combined with ABS technology and a dynamic NOMA power allocation scheme are designed to maximize the network fairness based on the optimized throughput of the edge users. The simulation results show that the proposed optimization strategy can balance the performance of network users more effectively to improve the throughput of edge users and network fairness than other NOMA user pairing and power allocation algorithms without the complexity being increased. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

17 pages, 12329 KiB  
Article
An Optimized Load Balancing Using Firefly Algorithm in Flying Ad-Hoc Network
by Manjit Kaur, Deepak Prashar, Mamoon Rashid, Zeba Khanam, Sultan S. Alshamrani and Ahmed Saeed AlGhamdi
Electronics 2022, 11(2), 252; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics11020252 - 13 Jan 2022
Cited by 8 | Viewed by 1693
Abstract
In flying ad hoc networks (FANETs), load balancing is a vital issue. Numerous conventional routing protocols that have been created are ineffective at load balancing. The different scope of its applications has given it wide applicability, as well as the necessity for location [...] Read more.
In flying ad hoc networks (FANETs), load balancing is a vital issue. Numerous conventional routing protocols that have been created are ineffective at load balancing. The different scope of its applications has given it wide applicability, as well as the necessity for location assessment accuracy. Subsequently, implementing traffic congestion control based on the current connection status is difficult. To successfully tackle the above problem, we frame the traffic congestion control algorithm as a network utility optimization problem that takes different parameters of the network into account. For the location calculation of unknown nodes, the suggested approach distributes the computational load among flying nodes. Furthermore, the technique has been optimized in a FANET utilizing the firefly algorithm along with the traffic congestion control algorithm. The unknown nodes are located using the optimized backbone. Because the computational load is divided efficiently among the flying nodes, the simulation results show that our technique considerably enhances the network longevity and balanced traffic. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

19 pages, 2426 KiB  
Article
Proposal for a Localization System for an IoT Ecosystem
by Juraj Machaj, Peter Brida and Slavomir Matuska
Electronics 2021, 10(23), 3016; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics10233016 - 02 Dec 2021
Cited by 5 | Viewed by 1661
Abstract
In the last decade, positioning using wireless signals has gained a lot of attention since it could open new opportunities for service providers. Localization is important, especially in indoor environments, where the widely used global navigation satellite systems (GNSS) signals suffer from high [...] Read more.
In the last decade, positioning using wireless signals has gained a lot of attention since it could open new opportunities for service providers. Localization is important, especially in indoor environments, where the widely used global navigation satellite systems (GNSS) signals suffer from high signal attenuation and multipath propagation, resulting in poor accuracy or a loss of positioning service. Moreover, in an Internet of things (IoT) environment, the implementation of GNSS receivers into devices may result in higher demands on battery capacity, as well as increased cost of the hardware itself. Therefore, alternative localization systems that are based on wireless signals for the communication of IoT devices are gaining a lot of attention. In this paper, we provide a design of an IoT localization system, which consists of multiple localization modules that can be utilized for the positioning of IoT devices that are connected thru various wireless technologies. The proposed system can currently perform localization based on received signals from LoRaWAN, ZigBee, Wi-Fi, UWB and cellular technologies. The implemented pedestrian dead reckoning algorithm can process the data measured by a mobile device that is equipped with inertial sensors to construct a radio map and thus help with the deployment of the positioning services based on a fingerprinting approach. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

16 pages, 1956 KiB  
Article
Physical Layer Intercept Probability in Wireless Sensor Networks over Fisher–Snedecor \({\mathcal{F}}\) Fading Channels
by Srđan Maričić, Nenad Milošević, Dejan Drajić, Dejan Milić and Jelena Anastasov
Electronics 2021, 10(12), 1368; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics10121368 - 08 Jun 2021
Cited by 2 | Viewed by 2653
Abstract
In this paper, we analyze the physical layer security (PLS) of an arbitrarily dimensioned wireless sensor network (WSN) in the presence of an unauthorized attacker. Various scheduling schemes have been exploited in order to enhance the secure transmission of reliable links impaired by [...] Read more.
In this paper, we analyze the physical layer security (PLS) of an arbitrarily dimensioned wireless sensor network (WSN) in the presence of an unauthorized attacker. Various scheduling schemes have been exploited in order to enhance the secure transmission of reliable links impaired by Fisher–Snedecor F fading. The path loss among active nodes is also considered. The exact intercept probability expressions are derived recalling an optimal scheduling scheme (OS), a scheduling policy based on a specific cumulative distribution function (CS), and round-robin scheduling as a baseline. The asymptotic behavior of the intercept metric is also presented in a simpler form with acceptable accuracy. The secrecy diversity orders are defined and the security–reliability tradeoff of WSN is specified. Numerical results are provided to demonstrate the interplay of various main/wiretap channel conditions, the distances among nodes, the number of active sensors, and the average main-to-eavesdropper’s signal ratio in order to upgrade the quality of the WSN secrecy performance. Additionally, the impact of the outage probability on the intercept probability is defined for a variety of scenarios under which either the CS or OS scheme could be selected as suitable for PLS enhancement. The obtained results are verified by independent Monte Carlo simulations. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

Review

Jump to: Research

30 pages, 1432 KiB  
Review
IoT-Based Wearable and Smart Health Device Solutions for Capnography: Analysis and Perspectives
by Davisson F. T. Morais, Gilberto Fernandes, Jr., Gildário D. Lima and Joel J. P. C. Rodrigues
Electronics 2023, 12(5), 1169; https://0-doi-org.brum.beds.ac.uk/10.3390/electronics12051169 - 28 Feb 2023
Cited by 2 | Viewed by 3068
Abstract
The potential of the Internet of Health Things (IoHT), also identified in the literature as the Internet of Medical Things (IoMT), is enormous, since it can generate expressive impacts on healthcare devices, such as the capnograph. When applied to mechanical ventilation, it provides [...] Read more.
The potential of the Internet of Health Things (IoHT), also identified in the literature as the Internet of Medical Things (IoMT), is enormous, since it can generate expressive impacts on healthcare devices, such as the capnograph. When applied to mechanical ventilation, it provides essential healthcare to the patient and helps save lives. This survey elaborates on a deep review of related literature about the most robust and effective innovative healthcare solutions using modern technologies, such as the Internet of Things (IoT), cloud computing, Blynk, Bluetooth Low Energy, Robotics, and embedded systems. It emphasizes that IoT-based wearable and smart devices that work as integrated systems can be a faster response to other pandemic crises, respiratory diseases, and other problems that may occur in the future. It may also extend the performance of e-Health platforms used as monitoring systems. Therefore, this paper considers the state of the art to substantiate research about sensors, highlighting the relevance of new studies, strategies, approaches, and novelties in the field. Full article
(This article belongs to the Special Issue Advances in Wireless Networks and Mobile Systems)
Show Figures

Figure 1

Back to TopTop