Microgrids: Protection, Cyber Physical Issues, and Control

A special issue of Inventions (ISSN 2411-5134). This special issue belongs to the section "Inventions and Innovation in Electrical Engineering/Energy/Communications".

Deadline for manuscript submissions: closed (31 March 2022) | Viewed by 12869

Special Issue Editors

Department of Energy Technology, Aalborg University, Esbjerg, Denmark
Interests: power system; dc microgrids; protection; fault detection; microgrid clusters
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Developments in power electronic converters, energy storage devices, renewable energy sources, and modern control strategies lead to implementing and increasing the penetration of Microgrids in power distribution systems. The existed Microgrids are distinguished from the traditional power systems due to the high penetration of advanced communication links, power electronic devices, control methods, sensors, and measurements. Moreover, due to the increasing penetration of renewable energy resources, the control strategy for congestion management, frequency control, optimal dispatch, and microgrids' energy management has become more complicated. Also, the Microgrids are still faced with several challenges in protecting and isolating faults in the system. Microgrids, due to the low tolerant of power electronic converters, high uncertainties, low length lines, and critical loads, the locating and detecting of faults in Microgrids require more study and research. On the other hand, the increasing power demand increases the importance of significant power-sharing, therefore, the appearance of Microgrid clusters helps power networks to solve this problem. However, the research on microgrid cluster control and protection is a new and challenging issue, which should be solved.

Dr. Amin Hajizadeh
Dr. Navid Bayati
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Inventions is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 1800 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Microgrids
  • Fault detection and location methods
  • Protection methods
  • Control strategy
  • Islanding Detection
  • Distributed control
  • Communication link
  • Fault isolations
  • DC Microgrid
  • Maritime Microgrids
  • Shipboard Microgrids
  • Machine learning
  • Signal processing
  • Microgrid clusters
  • Fuse

Published Papers (6 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

10 pages, 1731 KiB  
Article
Method of Forming Various Configurations of Telecommunication System Using Moving Target Defense
by Anatoly V. Ryapukhin, Evgeny O. Karpukhin and Ivan O. Zhuikov
Inventions 2022, 7(3), 83; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions7030083 - 16 Sep 2022
Cited by 7 | Viewed by 1380
Abstract
The purpose of this paper is to improve the effectiveness of the Moving Target Defense (MTD)-based protection method, which reduces the problem of using traditional network protection tools due to the static nature of network services and configurations. Options for solving the problems [...] Read more.
The purpose of this paper is to improve the effectiveness of the Moving Target Defense (MTD)-based protection method, which reduces the problem of using traditional network protection tools due to the static nature of network services and configurations. Options for solving the problems of choosing an adequate time interval for activating the technology of MTD and its application in networks are given. A new approach is proposed, which consists in creating a set of system configurations and changing it when an attack is detected and determined. The design implementation was tested on a network model using software defined networks (SDN). The advantages of the proposed method are highlighted, among which the most significant are: simple operation scheme, ability to deploy the system without the use of software-defined networks and absence of violations of security policies within the system. Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

19 pages, 2220 KiB  
Article
Improvement of Fault Current Calculation and Static Security Risk for Droop Control of the Inverter-Interfaced DG of Grid-Connected and Isolated Microgrids
by Mahmoud Aref, Mahmoud A. Mossa, Ngo Kim Lan, Nguyen Vu Quynh, Vladislav Oboskalov and Alaa F. M. Ali
Inventions 2022, 7(3), 52; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions7030052 - 29 Jun 2022
Viewed by 1629
Abstract
The contribution current of an inverter-interfaced distributed generator unit during a fault is one of the significant challenges for two modes: grid-connected and isolated AC microgrid. For this challenge, this article is aimed to study two methods of fault current calculation for two [...] Read more.
The contribution current of an inverter-interfaced distributed generator unit during a fault is one of the significant challenges for two modes: grid-connected and isolated AC microgrid. For this challenge, this article is aimed to study two methods of fault current calculation for two modes: grid-connected and isolated microgrids. These methods include a virtual equivalent impedance and a proposed method. The proposed method is a new technique for calculating the fault current contribution depending on the droop control of inverter-interfaced DG. The proposed method can control the contribution short-circuit current of DG within its limit (2 p.u.) where it is dependent on the voltage value of the DG bus to calculate the short circuit current of DG by using the control criterion. Static security risk and load shedding are calculated after fault clearance using an operation scenario in which the distribution system will be divided into small subsystems and is then grid-connected and isolated due to the removal of the faulted bus by protection devices. The proposed technique is applied to a standard IEEE 33-bus distribution network with five DGs. The results show that the contribution current of inverter-interfaced DG during the fault has more effects than the fault current of the nearest faulted bus to the DG bus. The proposed technique improves the calculated fault current value by about 30% for the grid-connected microgrid and by about 50% for the isolated microgrid from its value of the virtual impedance method. The static security risk is improved after load shedding. The static security risk improved by about 0.025%. Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

19 pages, 7627 KiB  
Article
A Novel Solution for Day-Ahead Scheduling Problems Using the IoT-Based Bald Eagle Search Optimization Algorithm
by Bilal Naji Alhasnawi, Basil H. Jasim, Pierluigi Siano, Hassan Haes Alhelou and Amer Al-Hinai
Inventions 2022, 7(3), 48; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions7030048 - 23 Jun 2022
Cited by 23 | Viewed by 2338
Abstract
Advances in technology and population growth are two factors responsible for increasing electricity consumption, which directly increases the production of electrical energy. Additionally, due to environmental, technical and economic constraints, it is challenging to meet demand at certain hours, such as peak hours. [...] Read more.
Advances in technology and population growth are two factors responsible for increasing electricity consumption, which directly increases the production of electrical energy. Additionally, due to environmental, technical and economic constraints, it is challenging to meet demand at certain hours, such as peak hours. Therefore, it is necessary to manage network consumption to modify the peak load and tackle power system constraints. One way to achieve this goal is to use a demand response program. The home energy management system (HEMS), based on advanced internet of things (IoT) technology, has attracted the special attention of engineers in the smart grid (SG) field and has the tasks of demand-side management (DSM) and helping to control equality between demand and electricity supply. The main performance of the HEMS is based on the optimal scheduling of home appliances because it manages power consumption by automatically controlling loads and transferring them from peak hours to off-peak hours. This paper presents a multi-objective version of a newly introduced metaheuristic called the bald eagle search optimization algorithm (BESOA) to discover the optimal scheduling of home appliances. Furthermore, the HEMS architecture is programmed based on MATLAB and ThingSpeak modules. The HEMS uses the BESOA algorithm to find the optimal schedule pattern to reduce daily electricity costs, reduce the PAR, and increase user comfort. The results show the suggested system’s ability to obtain optimal home energy management, decreasing the energy cost, microgrid emission cost, and PAR (peak to average ratio). Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

21 pages, 7034 KiB  
Article
A Novel Nonsingular Terminal Sliding Mode Control-Based Double Interval Type-2 Fuzzy Systems: Real-Time Implementation
by Hooman Mohammadi Moghadam, Meysam Gheisarnejad, Maryam Yalsavar, Hossein Foroozan and Mohammad-Hassan Khooban
Inventions 2021, 6(2), 40; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions6020040 - 04 Jun 2021
Cited by 6 | Viewed by 2339
Abstract
Extensive use of wind turbine (WT) systems brings remarkable challenges to the stability and safety of the power systems. Due to the difficulty and complexity of modeling such large plants, the model-independent strategies are preferred for the control of the WT plants which [...] Read more.
Extensive use of wind turbine (WT) systems brings remarkable challenges to the stability and safety of the power systems. Due to the difficulty and complexity of modeling such large plants, the model-independent strategies are preferred for the control of the WT plants which eliminates the need to model identification. This current work proposes a novel model-independent control methodology in the rotor side converter (RSC) part to ameliorate low voltage ride through (LVRT) ability especially for the doubly-fed induction generator (DFIG) WT. A novel model-independent nonsingular terminal sliding mode control (MINTSMC) was developed based on the principle of the ultra-local pattern. In the suggested controller, the MINTSMC scheme was designed to stabilize the RSC of the DFIG, and a sliding-mode supervisor was adopted to determine the unknown dynamics of the proposed system. An auxiliary dual input interval type 2 fuzzy logic control (DIT2-FLC) was established in a model-independent control structure to remove the estimation error of the sliding mode observer. Real-time examinations have been carried out using a Real-Time Model in Loop (RT-MiL) for validating the applicability of the proposed model-independent control in a real-time platform. To evaluate the usefulness and supremacy of the MINTSMC based DIT2-FLC, the real-time outcomes are compared with outcomes of RSC regulated conventional PI controller and MINTSMC controller. Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

19 pages, 2949 KiB  
Article
Efficient Protection Scheme Based on Y-Source Circuit Breaker in Bi-Directional Zones for MVDC Micro-Grids
by Haider Al-khafaf and Johnson Asumadu
Inventions 2021, 6(1), 18; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions6010018 - 10 Mar 2021
Cited by 7 | Viewed by 1893
Abstract
A new bi-directional circuit breaker is presented for medium-voltage dc (MVDC) systems. The Y-source impedance network topology is used to implement the breaker. The current transfer function is derived to show the frequency response and the breaker operation with the high frequencies. Mathematical [...] Read more.
A new bi-directional circuit breaker is presented for medium-voltage dc (MVDC) systems. The Y-source impedance network topology is used to implement the breaker. The current transfer function is derived to show the frequency response and the breaker operation with the high frequencies. Mathematical analysis is achieved with different conditions of coupling among the breaker inductors. The minimum level of the magnetic coupling is determined, which is represented by the null condition. The effect of the turns-ratio on this condition is investigated as well. The breaker is designed with two types of fault conductance slope rates. The Y-source breaker is simulated, and the results verify the breaker operation during the fault condition and the load change. The results also demonstrate the effect of the coupling level on the minimum values of the source current when the fault occurs. Based on the expected fault type in the MVDC systems, the proposed breaker is developed to interrupt the overcurrent due to any of these fault types. A protection scheme is proposed for a 12-bus, two-level micro-grid, where the Y-source breakers are used in the bi-directional zones. The results verify the ability of the breaker to conduct and interrupt the current in both directions of the power flow. Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

Review

Jump to: Research

42 pages, 7121 KiB  
Review
A Comprehensive Review of Architecture, Communication, and Cybersecurity in Networked Microgrid Systems
by Ahmed Aghmadi, Hossam Hussein, Ketulkumar Hitesh Polara and Osama Mohammed
Inventions 2023, 8(4), 84; https://0-doi-org.brum.beds.ac.uk/10.3390/inventions8040084 - 29 Jun 2023
Cited by 9 | Viewed by 2331
Abstract
Networked microgrids (NMGs) are developing as a viable approach for integrating an expanding number of distributed energy resources (DERs) while improving energy system performance. NMGs, as compared to typical power systems, are constructed of many linked microgrids that can function independently or as [...] Read more.
Networked microgrids (NMGs) are developing as a viable approach for integrating an expanding number of distributed energy resources (DERs) while improving energy system performance. NMGs, as compared to typical power systems, are constructed of many linked microgrids that can function independently or as part of a more extensive network. This allows NMGs to be more flexible, dependable, and efficient. The present study comprehensively investigates architecture, communication, and cybersecurity issues in NMGs. This comprehensive study examines various aspects related to networked microgrids (NMGs). It explores the architecture of NMGs, including control techniques, protection, standards, and the challenges associated with their adoption. Additionally, it investigates communication in NMGs, focusing on the technologies, protocols, and the impact of communication on the functioning of these systems. Furthermore, this study addresses cybersecurity challenges specific to NMGs, such as diverse cyberattack types, detection and mitigation strategies, and the importance of awareness training. The findings of this study offer valuable insights for NMG researchers and practitioners, emphasizing critical aspects that must be considered to ensure the safe and efficient operation of these systems. Full article
(This article belongs to the Special Issue Microgrids: Protection, Cyber Physical Issues, and Control)
Show Figures

Figure 1

Back to TopTop