materials-logo

Journal Browser

Journal Browser

Magnetic Functional Materials: Synthesis, Characterization and Application

A special issue of Materials (ISSN 1996-1944). This special issue belongs to the section "Quantum Materials".

Deadline for manuscript submissions: closed (20 September 2022) | Viewed by 15788

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special Issue Editors

Key Laboratory of Novel Materials for Sensor of Zhejiang Province, Institute of Material Physics, Hangzhou Dianzi University, Hangzhou 310018, China
Interests: magnetic materials; spintronics; thin films and nanotechnology; strain and defect
Special Issues, Collections and Topics in MDPI journals
College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018, China
Interests: spintronics and optoelectronics; ferroelastic properties of functional materials; electromagnetics
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

In the contemporary information society, energy, information and materials are the important foundation of production, life and high technology. Magnetic functional materials are widely used in energy, information and materials science and technology. There are many kinds of magnetic functional materials, and their progress is rapid. Magnetic functional materials have attracted a great deal of attention regarding their applications. Magnetic behaviors are widespread in a variety of materials, such as metals, ceramics, organics, and emerging 2D materials. Applications of magnetic materials include memories, sensors, magnetic refrigeration, drug delivery, NMR, electrochemistry, environmental protection, energy storage, and more. Magnetic functional materials are a hot topic. This Special Issue on “Magnetic functional materials: Synthesis, Characterization and Application” will provide a valuable and timely forum for sharing recent advances in the synthesis, fundamentals, characterization, and applications of magnetic materials.

Dr. Haiou Wang
Dr. Dexin Yang
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Materials is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • magnetic functional materials
  • materials fabrication and characterization
  • magnetic refrigeration
  • permanent magnets
  • memories and sensors
  • environmental protection
  • devices based on magnetic materials

Published Papers (10 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research

2 pages, 154 KiB  
Editorial
Magnetic Functional Materials: Synthesis, Characterization and Application: A New Open Special Issue in Materials
by Haiou Wang, Yan Wang and Dexin Yang
Materials 2022, 15(9), 2999; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15092999 - 20 Apr 2022
Viewed by 1479
Abstract
Magnetic Functional Materials: Synthesis, Characterization and Application is a new open Special Issue of Materials, which aims to publish original and review papers on new scientific and applied research, and make great contributions to the finding and understanding of magnetic functional materials [...] Read more.
Magnetic Functional Materials: Synthesis, Characterization and Application is a new open Special Issue of Materials, which aims to publish original and review papers on new scientific and applied research, and make great contributions to the finding and understanding of magnetic functional materials and related synthesis, fundamentals, characterization, and applications [...] Full article

Research

Jump to: Editorial

10 pages, 3727 KiB  
Article
Comparisons of Dy Utilization Efficiency by DyHx Grain Boundary Addition and Surface Diffusion Methods in Nd-Y-Fe-B Sintered Magnet
by Shuai Guo, Shicong Liao, Xiaodong Fan, Guangfei Ding, Bo Zheng, Renjie Chen and Aru Yan
Materials 2022, 15(17), 5964; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15175964 - 29 Aug 2022
Cited by 3 | Viewed by 1082
Abstract
Using the heavy rare earth Dy element to improve coercivity is the most common solution for hindering the reduction in magnetic properties in the Nd–Fe–B magnet, and the effective utilization of Dy has become the focus of research in industrial society. In this [...] Read more.
Using the heavy rare earth Dy element to improve coercivity is the most common solution for hindering the reduction in magnetic properties in the Nd–Fe–B magnet, and the effective utilization of Dy has become the focus of research in industrial society. In this work, we investigated the influence of DyHx addition and diffusion methods on the microstructure, magnetic performance, and thermal stability of the Nd–Y–Fe–B magnet with a Y-rich core structure. The coercivity of the DyHx addition magnet increases from 9.45 kOe to 15.51 kOe when adding 1.6 wt.% DyHx, while the DyHx diffusion magnet increases to 15.15 kOe. According to the analysis of the microstructure and elemental distribution, both Dy-rich shells were basically formed due to the diffusion process of Dy atoms. The Dy-rich shell in the DyHx addition magnet was similar with the original core–shell structure in the Nd–Y–Fe–B magnet. However, the distinct dual-shell structure consisting of a thinner Dy-rich shell and a Y-lean shell was constructed in the DyHx diffused magnet, contributing to the superior coercivity increment and Dy utilization efficiency. Furthermore, the remanence of the DyHx diffused magnet is up to 12.90 kG, which is better than that of the DyHx addition magnet (12.59 kG), due to fewer Dy atoms entering the 2:14:1 matrix grain to cause the antiferromagnetic coupling with Fe atoms. Additionally, the thermal stability of the DyHx diffusion magnet is also better than that of the DyHx addition magnet, owing to the elevated coercivity at room temperature, which expands the application range of the Nd–Y–Fe–B magnet to a certain extent. Full article
Show Figures

Figure 1

8 pages, 1959 KiB  
Article
Transport Property and Spin–Orbit Torque in 2D Rashba Ferromagnetic Electron Gas
by Chao Yang, Da-Kun Zhou, Ya-Ru Wang and Zheng-Chuan Wang
Materials 2022, 15(15), 5149; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15155149 - 25 Jul 2022
Viewed by 851
Abstract
In this paper, we investigate the spin–orbit torque and transport property in a 2D Rashba ferromagnetic electron gas. The longitudinal conductivity can be divided into two parts: the first term is determined by the charge density and is independent of the spin degrees [...] Read more.
In this paper, we investigate the spin–orbit torque and transport property in a 2D Rashba ferromagnetic electron gas. The longitudinal conductivity can be divided into two parts: the first term is determined by the charge density and is independent of the spin degrees of freedom. The second term depends on the two bands that spin in the opposite directions, and it is directly proportional to spin–orbit torque regardless of the band structure and temperature. This is a general and underlying relation between the transport property and spin–orbit torque. Moreover, we show the impacts of the spin–orbit coupling constant and Fermi energy on transverse conductivity and spin–orbit torque, which is helpful for relevant experiments. Full article
Show Figures

Figure 1

9 pages, 2457 KiB  
Article
The Effect of Grain Size on the Diffusion Efficiency and Microstructure of Sintered Nd-Fe-B Magnets by Tb Grain Boundary Diffusion
by Shuai Guo, Xiao Yang, Xiaodong Fan, Guangfei Ding, Shuai Cao, Bo Zheng, Renjie Chen and Aru Yan
Materials 2022, 15(14), 4987; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15144987 - 18 Jul 2022
Cited by 3 | Viewed by 1269
Abstract
The grain boundary diffusion process (GBDP) of heavy rare earth Tb is an effective method to improve the coercivity of Nd-Fe-B magnets, and the matrix grain size has a crucial effect on the diffusion efficiency and depth of the Tb element. In this [...] Read more.
The grain boundary diffusion process (GBDP) of heavy rare earth Tb is an effective method to improve the coercivity of Nd-Fe-B magnets, and the matrix grain size has a crucial effect on the diffusion efficiency and depth of the Tb element. In this work, magnets with different grain sizes have been fabricated using powder metallurgy to investigate the effect of grain size on Tb diffusion efficiency and the microstructure of Nd-Fe-B-type magnets. After the Tb diffusion process, the coercivity increment of the magnet with 4.9 μm large grain is 8.60 kOe, which is much higher than that of the magnet with 3.0 μm small grain (~5.90 kOe), which clearly demonstrates that the coercivity increment decreases as the grain size decreases. Microstructure analysis suggested that grain refinement significantly increases the total surface area, resulting in narrowing and discontinuity of the grain boundary phase (GBP). Therefore, as the channel for diffusion, the narrowing and discontinuity of the GBP are unfavorable for diffusion, resulting in a decrease in diffusion efficiency. Full article
Show Figures

Figure 1

9 pages, 749 KiB  
Article
Tomonaga–Luttinger Spin Liquid and Kosterlitz–Thouless Transition in the Spin-1/2 Branched Chains: The Study of Topological Phase Transition
by Hamid Arian Zad, Azam Zoshki, Nerses Ananikian and Michal Jaščur
Materials 2022, 15(12), 4183; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15124183 - 13 Jun 2022
Cited by 2 | Viewed by 1326
Abstract
In the present work, we provide a comprehensive numerical investigation of the magnetic properties and phase spectra of three types of spin-1/2 branched chains consisting of one, two and three side spins per unit block with intra-chain interaction and a uniform inter-chain interaction [...] Read more.
In the present work, we provide a comprehensive numerical investigation of the magnetic properties and phase spectra of three types of spin-1/2 branched chains consisting of one, two and three side spins per unit block with intra-chain interaction and a uniform inter-chain interaction in the presence of an external magnetic field. In a specific magnetic field interval, the low-temperature magnetization of these chains shows a step-like behavior with a pronounced plateau depending on the strength and the type of intra-chain interaction being ferromagnetic or antiferromagnetic. We demonstrate that when inter-chain interaction J1 is antiferromagnetic and intra-chain interaction J2 is ferromagnetic, the magnetization of the models manifests a smooth increase without a plateau, which is evidence of the existence of a Luttinger-like spin liquid phase before reaching its saturation value. On the other hand, when J1 is ferromagnetic and J2 is antiferromagnetic, the low-temperature magnetization of the chain with two branches shows an intermediate plateau at one-half of the saturation magnetization that breaks a quantum spin liquid phase into two regions. The magnetization of the chain with three branches exhibits two intermediate plateaus and two regions of a quantum spin liquid. We demonstrate that the chains with more than one side spin illustrate in their ground-state phase diagram a Kosterlitz–Thouless transition from a gapful phase to a gapless spin liquid phase. Full article
Show Figures

Figure 1

10 pages, 4520 KiB  
Article
Unraveling the Phase Stability and Physical Property of Modulated Martensite in Ni2Mn1.5In0.5 Alloys by First-Principles Calculations
by Xin-Zeng Liang, Jing Bai, Zi-Qi Guan, Yu Zhang, Jiang-Long Gu, Yu-Dong Zhang, Claude Esling, Xiang Zhao and Liang Zuo
Materials 2022, 15(11), 4032; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15114032 - 06 Jun 2022
Cited by 1 | Viewed by 1814
Abstract
Large magnetic field-induced strains can be achieved in modulated martensite for Ni-Mn-In alloys; however, the metastability of the modulated martensite imposes serious constraints on the ability of these alloys to serve as promising sensor and actuator materials. The phase stability, magnetic properties, and [...] Read more.
Large magnetic field-induced strains can be achieved in modulated martensite for Ni-Mn-In alloys; however, the metastability of the modulated martensite imposes serious constraints on the ability of these alloys to serve as promising sensor and actuator materials. The phase stability, magnetic properties, and electronic structure of the modulated martensite in the Ni2Mn1.5In0.5 alloy are systematically investigated. Results show that the 6M and 5M martensites are metastable and will eventually transform to the NM martensite with the lowest total energy in the Ni2Mn1.5In0.5 alloy. The physical properties of the incommensurate 7M modulated martensite (7M–IC) and nanotwinned 7M martensite (7M(52¯)2) are also calculated. The austenite (A) and 7M(52¯)2 phases are ferromagnetic (FM), whereas the 5M, 6M, and NM martensites are ferrimagnetic (FIM), and the FM coexists with the FIM state in the 7M–IC martensite. The calculated electronic structure demonstrates that the splitting of Jahn–Teller effect and the strong Ni–Mn bonding interaction lead to the enhancement of structural stability. Full article
Show Figures

Figure 1

16 pages, 3108 KiB  
Article
Microwave-Assisted Solvothermal Synthesis of Nanocrystallite-Derived Magnetite Spheres
by Greta Zambzickaite, Martynas Talaikis, Jorunas Dobilas, Voitech Stankevic, Audrius Drabavicius, Gediminas Niaura and Lina Mikoliunaite
Materials 2022, 15(11), 4008; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15114008 - 05 Jun 2022
Cited by 5 | Viewed by 1816
Abstract
The synthesis of magnetic particles triggers the interest of many scientists due to their relevant properties and wide range of applications in the catalysis, nanomedicine, biosensing and magnetic separation fields. A fast synthesis of iron oxide magnetic particles using an eco-friendly and facile [...] Read more.
The synthesis of magnetic particles triggers the interest of many scientists due to their relevant properties and wide range of applications in the catalysis, nanomedicine, biosensing and magnetic separation fields. A fast synthesis of iron oxide magnetic particles using an eco-friendly and facile microwave-assisted solvothermal method is presented in this study. Submicron Fe3O4 spheres were prepared using FeCl3 as an iron source, ethylene glycol as a solvent and reductor and sodium acetate as a precipitating and nucleating agent. The influence of the presence of polyethylene glycol as an additional reductor and heat absorbent was also evaluated. We reduce the synthesis time to 1 min by increasing the reaction temperature using the microwave-assisted solvothermal synthesis method under pressure or by adding PEG at lower temperatures. The obtained magnetite spheres are 200–300 nm in size and are composed of 10–30 nm sized crystallites. The synthesized particles were investigated using the XRD, TGA, pulsed-field magnetometry, Raman and FTIR methods. It was determined that adding PEG results in spheres with mixed magnetite and maghemite compositions, and the synthesis time increases the size of the crystallites. The presented results provide insights into the microwave-assisted solvothermal synthesis method and ensure a fast route to obtaining spherical magnetic particles composed of different sized nanocrystallites. Full article
Show Figures

Graphical abstract

16 pages, 6620 KiB  
Article
Sulfidized Nanoscale Zerovalent Iron Supported by Oyster Powder for Efficient Removal of Cr (VI): Characterization, Performance, and Mechanisms
by Hao Hu, Donglin Zhao, Changnian Wu and Rong Xie
Materials 2022, 15(11), 3898; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15113898 - 30 May 2022
Cited by 5 | Viewed by 1454
Abstract
In this study, sulfidized nanoscale zerovalent iron (S-nZVI) supported by oyster shell (OS) powder (S-nZVI@OS) was synthesized by controlling the initial S/Fe ratios (0.1–0.5) to explore the potential synergistic effects during the adsorption and reduction of Cr (VI). X-ray diffraction (XRD), transmission electron [...] Read more.
In this study, sulfidized nanoscale zerovalent iron (S-nZVI) supported by oyster shell (OS) powder (S-nZVI@OS) was synthesized by controlling the initial S/Fe ratios (0.1–0.5) to explore the potential synergistic effects during the adsorption and reduction of Cr (VI). X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analyses showed that Fe (0) and FeS were well dispersed on the OS surface. Furthermore, the stability of S-nZVI@OS composite was higher than that of nZVI, which was proved by the material ageing experiment. The effects of different S/Fe molar ratios, time, temperature, the initial concentration of Cr (VI), and initial pH on the removal efficiency were also studied. The results indicated that with the increase of the S/Fe molar ratio, the removal capacity of Cr (VI) first increased rapidly and then decreased slowly. Batch experiments showed that an optimal S/Fe molar ratio of 0.2 offered a Cr (VI) removal capacity of about 164.7 mg/g at pH 3.5. The introduction of S can not only promote Cr (VI) reduction but also combine with Cr (III) by forming precipitate on S-nZVI@OS mainly as CrxFe(1−x) OOH and Cr2S3. The adsorption thermodynamics and kinetics demonstrated that the Langmuir model and pseudo-second-order kinetics model can describe the adsorption isotherms and kinetics. These results suggest that S-nZVI@OS is an effective and safe material for removing Cr (VI) from aqueous solutions. Full article
Show Figures

Graphical abstract

14 pages, 6680 KiB  
Article
Effect of Polyimide-Phosphating Double Coating and Annealing on the Magnetic Properties of Fe-Si-Cr SMCs
by Haiming Long, Xiaojie Wu, Yunkun Lu, Haifeng Zhang and Junjie Hao
Materials 2022, 15(9), 3350; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15093350 - 07 May 2022
Cited by 9 | Viewed by 1505
Abstract
Fe-Si-Cr soft magnetic powder cores (SMCs), with high electrical resistivity, magnetic permeability, saturation magnetic induction, and good corrosion resistance, are widely applied to inductors, filters, choke coils, etc. However, with the development of electronic technology with high frequency and high power density, the [...] Read more.
Fe-Si-Cr soft magnetic powder cores (SMCs), with high electrical resistivity, magnetic permeability, saturation magnetic induction, and good corrosion resistance, are widely applied to inductors, filters, choke coils, etc. However, with the development of electronic technology with high frequency and high power density, the relative decline in the magnetic properties limits the high-frequency application of SMCs. In this paper, the phosphating process and polyimide (PI) insulation coating is applied to Fe-Si-Cr SMCs to reduce the core loss, including hysteresis loss and eddy current loss. The microstructure and composition of Fe-Si-Cr powders were analyzed by SEM, XRD, and Fourier-transform infrared spectra, respectively. The structural characteristics of the Fe-Si-Cr @ phosphate layer @ PI layer core–shell double coating were studied, and the best process parameters were determined through experiments. For SMCs with 0.4 wt% content of PI, the relative permeability is greater than 68%, and the core loss is the lowest, 7086 mW/cm3; annealed at 500 °C, the relative permeability is greater than 57%, and the core loss is the lowest, 6222 mW/cm3. A 0.4 wt% content of PI, annealed at 500 °C, exhibits the ideal magnetic properties: μe = 47 H/m, P = 6222 mW/cm3. Full article
Show Figures

Figure 1

11 pages, 2873 KiB  
Article
A Study on the Static Magnetic and Electromagnetic Properties of Silica-Coated Carbonyl Iron Powder after Heat Treatment for Improving Thermal Stability
by Xu Yan, Xinyuan Mu, Qinsheng Zhang, Zhanwei Ma, Chengli Song and Bin Hu
Materials 2022, 15(7), 2499; https://0-doi-org.brum.beds.ac.uk/10.3390/ma15072499 - 28 Mar 2022
Cited by 4 | Viewed by 1637
Abstract
In order to study the thermal stability of coated carbonyl iron powder (CIP) and its influence on magnetic properties, carbonyl iron powder was coated with a silica layer and then annealed in an air atmosphere at elevated temperatures. Transmission electron microscopy (TEM) analysis [...] Read more.
In order to study the thermal stability of coated carbonyl iron powder (CIP) and its influence on magnetic properties, carbonyl iron powder was coated with a silica layer and then annealed in an air atmosphere at elevated temperatures. Transmission electron microscopy (TEM) analysis and Fourier transform infrared spectroscopy confirmed the existence of a silicon dioxide layer with a thickness of approximately 80~100 nm. Compared with uncoated CIP, the silicon-coated CIP still maintained a higher absorption performance after annealing, and the calculated impedance matching value Z only slightly decreased. It is worth noting that when the annealing temperature reached 300 °C, coercivity (Hc) increased, and the real and imaginary parts of the permeability decreased, which means that the silicon dioxide layer began to lose its effectiveness. On the contrary, the significant decrease in microwave absorption ability and impedance matching value Z of uncoated CIP after annealing were mainly because the newly formed oxide on the interface became the active polarization center, leading to an abnormal increase in permittivity. In terms of the incremental mass ratio after annealing, 2% was a tipping point for permeability reduction. Full article
Show Figures

Figure 1

Back to TopTop