molecules-logo

Journal Browser

Journal Browser

Efficient Chemical Technologies and Adsorbents for Environmental Pollution Removal and Wastes Recycling

A special issue of Molecules (ISSN 1420-3049). This special issue belongs to the section "Green Chemistry".

Deadline for manuscript submissions: closed (30 September 2022) | Viewed by 38462

Special Issue Editors

Department of Inorganic Chemistry, Institute of Chemical Science, Faculty of Chemistry, Marie Curie-Sklodowska University in Lublin, 20-031 Lublin, Poland
Interests: sorption; separation of inorganic and organic compounds; heavy metal ions; dyes; phenols; textile wastewaters treatment; chemical modification of synthetic and natural polymers; adsorbents for water treatment; hybrid materials; low-cost adsorbents; ion-exchange resins; synthetic oxide materials; photochemistry; environmental protection
Special Issues, Collections and Topics in MDPI journals
Department of Inorganic Chemistry, Institute of Chemical Science, Faculty of Chemistry, Marie Curie-Sklodowska University, Maria Curie-Sklodowska Square 2, 20-031 Lublin, Poland
Interests: sorption; separation; removal; recovery; heavy and noble metals; dyes; phenols; textile wastewaters treatment; ion-exchange resins; synthetic oxide materials; hybrid materials; low-cost adsorbents; environmental protection
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

The world's industry is faced with an increasing amount of pollution generated to the environment as a result of intensive development and human activity. Particular attention is paid to those branches of industry that use large quantities of water in technological processes, and thus generate huge amounts of wastewater containing harmful and toxic substances that pose a direct threat to human health. Therefore, waste recycling and technologies considered waste as a source of raw materials, fuels and energy are of particular importance.

We are pleased to invite you to submit scientific articles, reviews and short communications discussing the latest developments in wastewater treatment technologies (adsorption, advanced oxidation processes, coagulation, flocculation, irradiation, membrane filtration), as well as waste recycling and recovery of valuable raw materials, such as precious metals or rare earths from spent catalysts or electronic waste.

Dr. Monika Wawrzkiewicz
Dr. Anna Wołowicz
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Molecules is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • emerging pollutants
  • heavy metals
  • noble metals
  • dyes
  • adsorbents
  • removal
  • recovery
  • sorption
  • pyrometallurgical process
  • hydrometallurgical process
  • leaching methods
  • spent catalyst
  • electronic waste
  • wastewater treatment
  • advanced oxidation process
  • coagulation
  • flocculation
  • irradiation
  • membrane filtration

Published Papers (21 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

16 pages, 5718 KiB  
Article
Effect of Co-Existing Cations and Anions on the Adsorption of Antibiotics on Iron-Containing Minerals
by Xiaoyu Guan, Juntao Guo, Hui Zhang, Shiyong Tao, Gilles Mailhot, Feng Wu and Jing Xu
Molecules 2022, 27(22), 8037; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27228037 - 19 Nov 2022
Cited by 10 | Viewed by 1317
Abstract
The adsorption of antibiotics on minerals is an important process in their environment behavior. The adsorption behavior of antibiotics on iron-containing minerals and the effect of co-existing cations and anions were studied in this work. Magnetite, hematite, goethite and kaolin were selected as [...] Read more.
The adsorption of antibiotics on minerals is an important process in their environment behavior. The adsorption behavior of antibiotics on iron-containing minerals and the effect of co-existing cations and anions were studied in this work. Magnetite, hematite, goethite and kaolin were selected as the representative minerals and characterized by SEM, XRD and BET. A total of eight antibiotics, including three quinolones, three sulfonamides and two mycins were chosen as the research targets. Results showed a higher adsorption amount of quinolones than that of sulfonamides and mycins on the surface of iron-containing minerals in most mineral systems. The adsorption isotherms of quinolones can be well fitted using the Freundlich models. The effects of five cations and five anions on the adsorption of quinolones were investigated, among which Mg2+, Ca2+, HCO3 and H2PO4 mainly showed significant inhibition on the adsorption, while the effects of K+, Na+, NH4+, Cl, NO3 and SO42− showed less. Natural surface water samples were also collected and used as media to investigate the adsorption behavior of quinolones on iron-containing minerals. The buffering capacity of the natural water kept the reaction solution at circumneutral conditions, and the adsorption amount was mostly promoted in the goethite system (from 0.56~0.78 μmol/g to 0.52~1.43 μmol/g), but was inhibited in the other systems (magnetite: from 1.13~1.33 μmol/g to 0.45~0.76 μmol/g; hematite: from 0.52~0.65 μmol/g to 0.02~0.18 μmol/g; kaolin: from 1.98~1.99 μmol/g to 0.90~1.40 μmol/g). The results in this work help to further understand the transportation and fate of antibiotics in an aqueous environment. Full article
Show Figures

Figure 1

12 pages, 1067 KiB  
Article
Correlation of Phosphorus Adsorption with Chemical Properties of Aluminum-Based Drinking Water Treatment Residuals Collected from Various Parts of the United States
by Roxana Rahmati, Virinder Sidhu, Rosita Nunez, Rupali Datta and Dibyendu Sarkar
Molecules 2022, 27(21), 7194; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27217194 - 24 Oct 2022
Cited by 4 | Viewed by 1588
Abstract
Over the past several decades, the value of drinking water treatment residuals (WTRs), a byproduct of the coagulation process during water purification, has been recognized in various environmental applications, including sustainable remediation of phosphorus (P)-enriched soils. Aluminum-based WTRs (Al-WTRs) are suitable adsorbent materials [...] Read more.
Over the past several decades, the value of drinking water treatment residuals (WTRs), a byproduct of the coagulation process during water purification, has been recognized in various environmental applications, including sustainable remediation of phosphorus (P)-enriched soils. Aluminum-based WTRs (Al-WTRs) are suitable adsorbent materials for P, which can be obtained and processed inexpensively. However, given their heterogeneous nature, it is essential to identify an easily analyzable chemical property that can predict the capability of Al-WTRs to bind P before soil amendment. To address this issue, thirteen Al-WTRs were collected from various geographical locations around the United States. The non-hazardous nature of the Al-WTRs was ascertained first. Then, their P adsorption capacities were determined, and the chemical properties likely to influence their adsorption capacities were examined. Statistical models were built to identify a single property to best predict the P adsorption capacity of the Al-WTRs. Results show that all investigated Al-WTRs are safe for environmental applications, and oxalate-extractable aluminum is a significant indicator of the P adsorption capacity of Al-WTRs (p-value = 0.0002, R2 = 0.7). This study is the first to report a simple chemical test that can be easily applied to predict the efficacy of Al-WTRs in binding P before their broadscale land application. Full article
Show Figures

Graphical abstract

17 pages, 4224 KiB  
Article
Phosphorus and Heavy Metals Removal from Stormwater Runoff Using Granulated Industrial Waste for Retrofitting Catch Basins
by Viravid Na Nagara, Dibyendu Sarkar and Rupali Datta
Molecules 2022, 27(21), 7169; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27217169 - 23 Oct 2022
Cited by 6 | Viewed by 1732
Abstract
Phosphorus and heavy metals are washed off and transported with stormwater runoff to nearby surface water bodies resulting in environmental and human health risks. Catch basins remain one of the primary gateways through which stormwater runoff and pollutants from urban areas are transported. [...] Read more.
Phosphorus and heavy metals are washed off and transported with stormwater runoff to nearby surface water bodies resulting in environmental and human health risks. Catch basins remain one of the primary gateways through which stormwater runoff and pollutants from urban areas are transported. Retrofitting catch basins to enhance their phosphorus and heavy metal removal can be an effective approach. In this study, aluminum-based water treatment residual (WTR, a non-hazardous byproduct of the water treatment process) was granulated via a green method to serve as a sustainable filter material, called WTR granules, for enhancing the capabilities of catch basins to remove phosphorus and heavy metals. The WTR granules were field tested in a parking lot in Hoboken, New Jersey. Twelve storm events were monitored. The results showed that the WTR granules significantly (p < 0.05) reduced dissolved P, Cu, and Zn, as well as total P, Cu, Pb, and Zn concentrations in stormwater runoff without signs of disintegration. No flooding or water ponding was observed during the implementation. Results suggest the WTR granules are an inexpensive, green filter material that can be used for retrofitting catch basins to remove phosphorus and heavy metals effectively. Full article
Show Figures

Graphical abstract

15 pages, 1161 KiB  
Article
Soluble Extracellular Polymeric Substances Produced by Parachlorella kessleri and Chlorella vulgaris: Biochemical Characterization and Assessment of Their Cadmium and Lead Sorption Abilities
by Wioleta Ciempiel, Magdalena Czemierska, Monika Szymańska-Chargot, Artur Zdunek, Dariusz Wiącek, Anna Jarosz-Wilkołazka and Izabela Krzemińska
Molecules 2022, 27(21), 7153; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27217153 - 22 Oct 2022
Cited by 7 | Viewed by 1429
Abstract
In the present study, the potential of lead and cadmium removal by the extracellular polymeric substances (EPS) produced from Parachlorella kessleri and Chlorella vulgaris were investigated. Carbohydrates were the dominant components of EPS from both analyzed species. The contents of reducing sugars, uronic [...] Read more.
In the present study, the potential of lead and cadmium removal by the extracellular polymeric substances (EPS) produced from Parachlorella kessleri and Chlorella vulgaris were investigated. Carbohydrates were the dominant components of EPS from both analyzed species. The contents of reducing sugars, uronic acids, and amino acids were higher in EPS synthesized by C. vulgaris than in EPS from P. kessleri. The analysis of the monosaccharide composition showed the presence of rhamnose, mannose and galactose in the EPS obtained from both species. The ICP-OES (inductively coupled plasma optical emission spectrometry) analyses demonstrated that C. vulgaris EPS showed higher sorption capacity in comparison to P. kessleri EPS. The sorption capacity of C. vulgaris EPS increased with the increase in the amount of metal ions. P. kessleri EPS had a maximum sorption capacity in the presence of 100 mg/L of metal ions. The FTIR analysis demonstrated that the carboxyl, hydroxyl, and carbonyl groups of EPS play a key role in the interactions with metal ions. The present study showed C. vulgaris EPS can be used as a biosorbent in bioremediation processes due to its biochemical composition, the presence of significant amounts of negatively charged uronic acids, and higher sorption capacity. Full article
Show Figures

Figure 1

11 pages, 1703 KiB  
Article
The Possibility of Using Waste Phosphates from the Production of Polyols for Fertilizing Purposes
by Paulina Bogusz
Molecules 2022, 27(17), 5632; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27175632 - 01 Sep 2022
Cited by 5 | Viewed by 1381
Abstract
The limited resources of phosphorus raw materials, which are located outside of Europe, make it necessary to obtain phosphorus from the waste stream. This is reflected in the new EU Regulation 2019/1009, which concerns making fertilizing products available on the market. Its main [...] Read more.
The limited resources of phosphorus raw materials, which are located outside of Europe, make it necessary to obtain phosphorus from the waste stream. This is reflected in the new EU Regulation 2019/1009, which concerns making fertilizing products available on the market. Its main goal is to harmonize the standards for fertilizers obtained from organic or secondary raw materials in the EU and to create new opportunities for their production and sale. The fertilizer sector uses almost 90% of the phosphorus raw material, for which there is no substitute, and the demand for fertilizers is constantly growing, stimulated by the growing number of people. A substitute for expensive imported raw materials can be waste sodium–potassium phosphate from the production of polyols. This study analyzes the composition and form of waste from PCC Rokita S. A. from Brzeg Dolny in Poland, in terms of the possibility of using it in the production of fertilizers according to the new EU regulations. Research shows that it contains nearly 19% phosphorus, as well as potassium and sodium. Low-level impurities and low organic matter content classify it as a raw material for the production of inorganic fertilizers. Due to the high water content, the most advantageous form of its use is the production of fertilizers in the form of a suspension. A certain difficulty in the production of this type of fertilizer may be the layers of crystals of different sizes precipitating in the waste. Full article
Show Figures

Graphical abstract

18 pages, 4590 KiB  
Article
Sorption Preconcentration and Analytical Determination of Cu, Zr and Hf in Waste Samarium–Cobalt Magnet Samples
by Alexandra Alexandrovna Arkhipenko, Kseniya Vadimovna Petrova and Vasilisa Borisovna Baranovskaya
Molecules 2022, 27(16), 5275; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27165275 - 18 Aug 2022
Cited by 1 | Viewed by 1239
Abstract
We developed a method of sorption determination via the atomic emission of Cu, Zr and Hf metals in the waste of samarium–cobalt magnets. This method was based on the preconcentration of impurities using S- and N-containing heterochain sorbents, with further determination of the [...] Read more.
We developed a method of sorption determination via the atomic emission of Cu, Zr and Hf metals in the waste of samarium–cobalt magnets. This method was based on the preconcentration of impurities using S- and N-containing heterochain sorbents, with further determination of the analytes via inductively coupled plasma atomic emission spectrometry (ICP-OES). Different sorbents such as PED (polyethelendiamine), TDA (polythiodimethanamine), PhED (N-phenylpolyethediamine) and PTE (polythioether) were tested for Ti, Cu, Zr, Nb and Hf extraction. The PTE sorbent ensured the maximum extraction of the analytes (recovery 60% for Ti, 80% for Nb, 95–100% for Cu, Zr and Hf) and thus was selected for further research. Additionally, various acidities of chloride solution (0.01–1 M HCl) were investigated for metal sorption. Under the optimised sorption conditions, trace impurities of Cu, Zr and Hf were determined using ICP-OES with a relative standard deviation of less than 5%. The obtained results were confirmed by the added–found method and cross-method experiments. The detection limits (DLs) were 1.5, 2, 0.15, 2 and 0.75 µg/L for Ti, Cu, Zr, Nb and Hf, respectively. The proposed method can be successfully used for the determination of various microelements in other waste REE-magnetic materials. Full article
Show Figures

Graphical abstract

15 pages, 2686 KiB  
Article
Effective Removal of Methylene Blue from Simulated Wastewater Using ZnO-Chitosan Nanocomposites: Optimization, Kinetics, and Isotherm Studies
by Zakariyya Uba Zango, John Ojur Dennis, A. I. Aljameel, Fahad Usman, Mohammed Khalil Mohammed Ali, Bashir Abubakar Abdulkadir, Saja Algessair, Osamah A. Aldaghri and Khalid Hassan Ibnaouf
Molecules 2022, 27(15), 4746; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27154746 - 25 Jul 2022
Cited by 28 | Viewed by 1819
Abstract
Successful synthesis of ZnO-chitosan nanocomposites was conducted for the removal of methylene blue from an aqueous medium. Remarkable performance of the nanocomposites was demonstrated for the effective uptake of the dye, thereby achieving 83.77, 93.78 and 97.93 mg g−1 for the chitosan, [...] Read more.
Successful synthesis of ZnO-chitosan nanocomposites was conducted for the removal of methylene blue from an aqueous medium. Remarkable performance of the nanocomposites was demonstrated for the effective uptake of the dye, thereby achieving 83.77, 93.78 and 97.93 mg g−1 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. The corresponding adsorption efficiency was 88.77, 93.78 and 97.95 for the chitosan, 5 wt.% ZnO-Chitosan and 10 wt.% ZnO-Chitosan, respectively. Upon regeneration, good reusability of the nanocomposites was manifested for the continuous removal of the dye up to six consecutive cycles. The adsorption process was kinetically described by a pseudo-first order model, while the isotherms were best fitted by the Langmuir model. Full article
Show Figures

Figure 1

22 pages, 2167 KiB  
Article
Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Textile and Surgical Industrial Wastewater by Sorghum
by Mujahid Farid, Muhammad Abubakar, Zaki Ul Zaman Asam, Wajiha Sarfraz, Mohsin Abbas, Muhammad Bilal Shakoor, Shafaqat Ali, Sajid Rashid Ahmad, Asim Jilani, Javed Iqbal, Abdullah G. Al-Sehemi and Omar A. Al-Hartomy
Molecules 2022, 27(13), 4004; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27134004 - 22 Jun 2022
Cited by 3 | Viewed by 1419
Abstract
We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the [...] Read more.
We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H2O2), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment. Full article
Show Figures

Graphical abstract

17 pages, 6793 KiB  
Article
New Polymeric Adsorbents Functionalized with Aminobenzoic Groups for the Removal of Residual Antibiotics
by Radu Ardelean, Adriana Popa, Ecaterina Stela Drăgan, Corneliu-Mircea Davidescu and Maria Ignat
Molecules 2022, 27(9), 2894; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27092894 - 30 Apr 2022
Cited by 4 | Viewed by 1432
Abstract
In this paper, we present the synthesis of new polymeric adsorbents derived from macroporous chloromethylated styrene–divinylbenzene (DVB) copolymers with different cross-linking degrees functionalized with the following aminobenzoic groups: styrene—6.7% DVB (PAB1), styrene—10% DVB (PAB2), and styrene—15% DVB (PAB3). The new polymeric products, PAB1, [...] Read more.
In this paper, we present the synthesis of new polymeric adsorbents derived from macroporous chloromethylated styrene–divinylbenzene (DVB) copolymers with different cross-linking degrees functionalized with the following aminobenzoic groups: styrene—6.7% DVB (PAB1), styrene—10% DVB (PAB2), and styrene—15% DVB (PAB3). The new polymeric products, PAB1, PAB2, and PAB3, were characterized by FTIR spectroscopy, thermogravimetric analysis, and EDX, SEM, and BET analysis, respectively. The evolution of the functionalization reaction was followed by FTIR spectroscopy, which revealed a decrease in the intensity of the γCH2Cl band at 1260 cm−1, and, simultaneously, the appearance of C=O carboxylic bands from 1685–1695 cm−1 and at 1748 cm−1. The thermal stability increased with the increase in the cross-linking degree. The data obtained from the EDX analysis of the novel cross-linked copolymers confirmed the functionalization with aminobenzoic groups through the presence and content of nitrogen, as follows: PAB1: N% = 0.47; PAB2: N% = 0.85; and PAB3: N% = 1.30. The adsorption performances of the novel polymeric adsorbents, PAB1, PAB2, and PAB3, were tested in the adsorption of three antibiotics, tetracycline, sulfamethoxazole, and amoxicillin, from aqueous solutions, by using extensive kinetic, equilibrium, and thermodynamic studies. The best adsorption capacity was demonstrated by the tetracycline. Amoxicillin adsorption was also attempted, but it did not show positive results. Full article
Show Figures

Figure 1

20 pages, 5131 KiB  
Article
Fixed-Bed Adsorption: Comparisons of Virgin and Zirconium Oxide-Coated Scoria for the Removal of Fluoride from Water
by Wondwosen Sime Geleta, Esayas Alemayehu and Bernd Lennartz
Molecules 2022, 27(8), 2527; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27082527 - 14 Apr 2022
Cited by 4 | Viewed by 1708
Abstract
Many people worldwide are exposed to extreme levels of fluoride in drinking water. It is, therefore, critical to develop inexpensive, locally available, and environmentally friendly adsorbents for fluoride-laden water defluoridation. In the current study, virgin scoria (volcanic rock) from Ethiopia, was modified with [...] Read more.
Many people worldwide are exposed to extreme levels of fluoride in drinking water. It is, therefore, critical to develop inexpensive, locally available, and environmentally friendly adsorbents for fluoride-laden water defluoridation. In the current study, virgin scoria (volcanic rock) from Ethiopia, was modified with zirconium oxide and used as an adsorbent in a fixed-bed column aiming at the removal of fluoride from water. The adsorption capability of zirconium oxide-coated scoria (ZrOCSc) was compared with unmodified virgin scoria (VSco). XRD, FTIR, XRF, SEM, ICP-OES, and the pHPZC tests were evaluated to explore the adsorption mechanisms. Thermal analysis of VSco and ZrOCSc revealed lower total weight losses of 2.3 and 3.2 percent, respectively, owing to the removal of water molecules and OH species linked to metal oxides contained in the material. The effect of test conditions such as the pH of the solution and the influent flow rate on the adsorption capacity of the adsorbent was carefully studied. ZrOCSc exhibited the maximum removal capacity of 58 mg/kg, which was 4.46 times higher than the observations for VSco (13 mg/kg) at pH 2, and an initial flow rate of 1.25 mL/min. Breakthrough time increased with decreasing initial pH and flow rate. The adsorption experimental data under various test conditions were examined by the Thomas and Adams–Bohart models. Both models were found very effective in describing the experimental data with a correlation coefficient (R2) of ≥0.976 (ZrOCSc) and ≥0.967 (VSco). Generally, coating VSco with zirconium oxide improved the adsorption performance of VSco; hence, a ZrOCSc-packed fixed bed could be employed for the decontamination of high levels of fluoride from groundwater. However, further examination of the adsorbent using natural groundwater is advisable to produce a definitive conclusion. Full article
Show Figures

Figure 1

29 pages, 4654 KiB  
Article
Removal of Copper(II) in the Presence of Sodium Dodecylobenzene Sulfonate from Acidic Effluents Using Adsorption on Ion Exchangers and Micellar-Enhanced Ultrafiltration Methods
by Anna Wołowicz, Katarzyna Staszak and Zbigniew Hubicki
Molecules 2022, 27(8), 2430; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27082430 - 09 Apr 2022
Cited by 7 | Viewed by 1714
Abstract
The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the systems containing Cu(II) in the presence of ABSNa50 surfactant [...] Read more.
The selective removal of Cu(II) in the presence of sodium dodecylobenzene sulfonate from acidic effluents was made using the adsorption and micellar-enhanced ultrafiltration methods. Lewatit MonoPlus TP220 showed the best adsorption behavior in the systems containing Cu(II) in the presence of ABSNa50 surfactant compared to the other adsorbents (removal efficiency ≈ 100%, sorption capacity ≈ 10 mg/g). The kinetics followed the pseudo-second order kinetic equation. The Langmuir adsorption capacities were 110 mg/g (the system with ABSNa50 above CMC) and 130.38 mg/g (the system with ABSNa50 below CMC). The working ion exchange capacities were Cw = 0.0216 g/mL and Cw = 0.0135 g/mL. The copper removal by the micellar-enhanced ultrafiltration method was 76.46% (0.1 mol/L HCl). Full article
Show Figures

Graphical abstract

16 pages, 4585 KiB  
Article
Granulation of Nickel–Aluminum–Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase
by Ayako Tabuchi, Fumihiko Ogata, Yugo Uematsu, Megumu Toda, Masashi Otani, Chalermpong Saenjum, Takehiro Nakamura and Naohito Kawasaki
Molecules 2022, 27(8), 2392; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27082392 - 07 Apr 2022
Cited by 5 | Viewed by 1596
Abstract
We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium [...] Read more.
We combined a nickel–aluminum–zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium (NAZ-M), and large (NAZ-L). We confirmed the granulation of the prepared samples at a binder content of 25%. NAZ-S had the largest specific surface area and number of hydroxyl groups, followed by NAZ-M and then NAZ-L. Regarding the adsorption capacity, NAZ-S adsorbed the most chromium(VI) ions followed by NAZ-M and then NAZ-L. The binding energy of Cr(2p) at 575–577 eV was detected after adsorption, and the effects of the temperature, contact time, and pH on the adsorption of chromium(VI) ions were evaluated. We identified the following adsorption mechanism: ion exchange with sulfate ions in the interlayer region of the NAZ samples. Finally, the chromium(VI) ions adsorbed by the NAZ samples were easily desorbed using a desorption solution. The results showed that NAZ offers great potential for the removal of chromium(VI) ions from aqueous solutions. Full article
Show Figures

Graphical abstract

17 pages, 52354 KiB  
Article
Sustainable Recovery of Valuable Nanoporous Materials from High-Chlorine MSWI Fly Ash by Ultrasound with Organic Acids
by Tam Thanh Nguyen, Cheng-Kuo Tsai and Jao-Jia Horng
Molecules 2022, 27(7), 2289; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072289 - 31 Mar 2022
Cited by 2 | Viewed by 1940
Abstract
The new technology development for municipal solid waste incineration fly ash treatment and reuse is urgent due to landfill shortage and environmental effect of leached hazardous substances. Chlorine (Cl) is worth considering due to its high levels in fly ash. In this study, [...] Read more.
The new technology development for municipal solid waste incineration fly ash treatment and reuse is urgent due to landfill shortage and environmental effect of leached hazardous substances. Chlorine (Cl) is worth considering due to its high levels in fly ash. In this study, a treatment process of ultrasound combined with organic acid was used to eliminate Cl from fly ash to enhance its properties for reuse. Taguchi methodology was implemented to design the experiments by controlling four impact factors and the contribution of each factor was evaluated by the ANOVA analysis of variance. Following two treatment steps within 5 min with a solid/liquid ratio of 1:10 at 165 kHz, 98.8% of Cl was eliminated. Solid/liquid ratio was the most prominent factor that contributed to the Cl removal with more than 90%, according to the ANOVA analysis of variance. Tert-butyl alcohol (tBuOH), an OH radical scavenger, was utilized to examine different effects of ultrasonic cavitation on Cl removal efficiency. A 20 kHz ultrasound was used to explore the influence of multi-frequency ultrasound with different mechanical and sonochemical effects on the fly ash dechlorination. This ultrasonic-assisted organic acid treatment was found to be a time and cost-effective pathway for fly ash Cl removal. Full article
Show Figures

Graphical abstract

23 pages, 5004 KiB  
Article
Strongly Basic Anion Exchange Resin Based on a Cross-Linked Polyacrylate for Simultaneous C.I. Acid Green 16, Zn(II), Cu(II), Ni(II) and Phenol Removal
by Monika Wawrzkiewicz, Anna Wołowicz and Zbigniew Hubicki
Molecules 2022, 27(7), 2096; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072096 - 24 Mar 2022
Cited by 7 | Viewed by 1959
Abstract
The adsorption ability of Lewatit S5528 (S5528) resin for C.I. Acid Green 16 (AG16), heavy metals (Zn(II), Cu(II) and Ni(II)) and phenol removal from single-component aqueous solutions is presented in this study to assess its suitability for wastewater treatment. Kinetic and equilibrium studies [...] Read more.
The adsorption ability of Lewatit S5528 (S5528) resin for C.I. Acid Green 16 (AG16), heavy metals (Zn(II), Cu(II) and Ni(II)) and phenol removal from single-component aqueous solutions is presented in this study to assess its suitability for wastewater treatment. Kinetic and equilibrium studies were carried out in order to determine adsorption capacities, taking into account phase contact time, adsorbates’ initial concentration, and auxiliary presence (NaCl, Na2SO4, anionic (SDS) and non-ionic (Triton X100) surfactants). The pseudo-second-order kinetic model described experimental data better than pseudo-first-order or intraparticle diffusion models. The adsorption of AG16 (538 mg/g), phenol (14.5 mg/g) and Cu(II) (5.8 mg/g) followed the Langmuir isotherm equation, while the uptake of Zn(II) (0.179 mg1−1/nL1/n/g) and Ni(II) (0.048 mg1−1/nL1/n/g) was better described by the Freundlich model. The auxiliary’s presence significantly reduced AG16 removal efficiency, whereas in the case of heavy metals the changes were negligible. The column studies proved the good adsorption ability of Lewatit S5528 towards AG16 and Zn(II). The desorption was the most effective for AG16 (>90% of dye was eluted using 1 mol/L HCl + 50% v/v MeOH and 1 mol/L NaCl + 50% v/v MeOH solutions). Full article
Show Figures

Figure 1

21 pages, 2931 KiB  
Article
Molecular Interactions Associated with Coagulation of Organic Pollutants by 2S Albumin of Plant Proteins: A Computational Approach
by Victoria T. Adeleke, Nkosinathi E. Madlala, Adebayo A. Adeniyi and David Lokhat
Molecules 2022, 27(5), 1685; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27051685 - 04 Mar 2022
Cited by 4 | Viewed by 1482
Abstract
The removal of organic pollutants is a major challenge in wastewater treatment technologies. Coagulation by plant proteins is a promising technique for this purpose. The use of these proteins has been experimentally investigated and reported in the literature. However, the determination of the [...] Read more.
The removal of organic pollutants is a major challenge in wastewater treatment technologies. Coagulation by plant proteins is a promising technique for this purpose. The use of these proteins has been experimentally investigated and reported in the literature. However, the determination of the molecular interactions of these species is experimentally challenging and the computational approach offers a suitable alternative in gathering useful information for this system. The present study used a molecular dynamic simulation approach to predict the potentials of using Moringa oleifera (MO), Arachis hypogaea, Bertholletia excelsa, Brassica napus, and Helianthus annuus plant proteins for the coagulation of organic pollutants and the possible mechanisms of coagulation of these proteins. The results showed that the physicochemical and structural properties of the proteins are linked to their performance. Maximum coagulation of organic molecules to the proteins is between 50–100%. Among five proteins studied for coagulation, Brassica napus and Helianthus annuus performed better than the well-known MO protein. The amino acid residues interacting with the organic molecules play a significant role in the coagulation and this is peculiar with each plant protein. Hydrogen bond and π—interactions dominate throughout the protein–pollutants molecular interactions. The reusability of the proteins after coagulation derived from their structural quality analysis along with the complexes looks promising and most of them are better than that of the MO. The results showed that the seed proteins studied have good prediction potentials to be used for the coagulation of organic pollutants from the environment, as well as the insights into their molecular activities for bioremediation. Full article
Show Figures

Figure 1

14 pages, 1870 KiB  
Article
Coagulation Behavior of Antimony Oxyanions in Water: Influence of pH, Inorganic and Organic Matter on the Physicochemical Characteristics of Iron Precipitates
by Muhammad Ali Inam, Kang Hoon Lee, Hira Lal Soni, Kashif Hussain Mangi, Abdul Sami Channa, Rizwan Khan, Young Min Wie and Ki Gang Lee
Molecules 2022, 27(5), 1663; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27051663 - 03 Mar 2022
Cited by 3 | Viewed by 1441
Abstract
The presence of inorganic and organic substances may alter the physicochemical properties of iron (Fe) salt precipitates, thereby stabilizing the antimony (Sb) oxyanions in potable water during the chemical treatment process. Therefore, the present study aimed to examine the surface characteristics, size of [...] Read more.
The presence of inorganic and organic substances may alter the physicochemical properties of iron (Fe) salt precipitates, thereby stabilizing the antimony (Sb) oxyanions in potable water during the chemical treatment process. Therefore, the present study aimed to examine the surface characteristics, size of Fe flocs and coagulation performance of Sb oxyanions under different aqueous matrices. The results showed that surface properties of Fe flocs significantly varies with pH in both Sb(III, V) suspensions, thereby increasing the mobility of Sb(V) ions in alkaline conditions. The negligible change in surface characteristics of Fe flocs was observed in pure water and Sb(III, V) suspension at pH 7. The key role of Van der Waals forces of attraction as well as hydration force in the aggregation of early formed flocs were found, with greater agglomeration capability at higher more ferric chloride dosage. The higher Sb(V) loading decreased the size of Fe flocs and reversed the surface charge of precipitates, resulting in a significant reduction in Sb(V) removal efficiency. The competitive inhibition effect on Sb(III, V) removal was noticed in the presence of phosphate anions, owing to lowering of ζ-potential values towards more negative trajectory. The presence of hydrophobic organic matter (humic acid) significantly altered the surface characteristics of Fe flocs, thereby affecting the coagulation behavior of Sb in water as compared to the hydrophilic (salicylic acid). Overall, the findings of this research may provide a new insight into the variation in physicochemical characteristics of Fe flocs and Sb removal behavior in the presence of inorganic and organic compounds during the drinking water treatment process. Full article
Show Figures

Figure 1

14 pages, 619 KiB  
Article
Applicability of Ash Wastes for Reducing Trace Element Content in Zea mays L. Grown in Eco-Diesel Contaminated Soil
by Mirosław Wyszkowski, Jadwiga Wyszkowska, Natalia Kordala and Agata Borowik
Molecules 2022, 27(3), 897; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27030897 - 28 Jan 2022
Cited by 4 | Viewed by 1374
Abstract
Among the large group of xenobiotics released into the environment, petroleum derivatives are particularly dangerous, especially given continuing industrial development and the rising demand for fuel. As increasing amounts of fly ash and sewage sludge are released, it becomes necessary to explore new [...] Read more.
Among the large group of xenobiotics released into the environment, petroleum derivatives are particularly dangerous, especially given continuing industrial development and the rising demand for fuel. As increasing amounts of fly ash and sewage sludge are released, it becomes necessary to explore new methods of reusing these types of waste as reclamation agents or nutrient sources. The present study examined how soil contamination with Eco-Diesel oil (0; 10; 20 cm3 kg−1 soil) affected the trace-element content in the aerial parts of maize. Coal and sludge ashes were used as reclamation agents. Our study revealed that diesel oil strongly affected the trace-element content in the aerial parts of maize. In the non-amended group, Eco-Diesel oil contamination led to higher accumulation of the trace elements in maize (with the exception of Pb and Ni), with Cu and Mn content increasing the most. The ashes incorporated into the soil performed inconsistently as a reclamation agent. Overall, the amendment reduced Mn and Fe in the aerial parts of maize while increasing average Cd and Cu levels. No significant effect was noted for the other elements. Full article
Show Figures

Figure 1

13 pages, 2692 KiB  
Article
Study of the Photocatalytic Degradation of Highly Abundant Pesticides in Agricultural Soils
by Mohamed H. EL-Saeid, Amal BaQais and Mashael Alshabanat
Molecules 2022, 27(3), 634; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27030634 - 19 Jan 2022
Cited by 15 | Viewed by 3435
Abstract
Organic pesticides are major sources of soil pollution in agricultural lands. Most of these pesticides are persistent and tend to bio accumulate in humans upon consumption of contaminated plants. In this study, we investigate different natural soil samples that were collected from agricultural [...] Read more.
Organic pesticides are major sources of soil pollution in agricultural lands. Most of these pesticides are persistent and tend to bio accumulate in humans upon consumption of contaminated plants. In this study, we investigate different natural soil samples that were collected from agricultural lands. The samples revealed the presence of 18 pesticides that belong to four different groups including organochlorines (OCP), organophosphorus (OPP), carbamates (Carb), and pyrethroids (Pyrth). The photocatalytic degradation of the five most abundant pesticides was studied in the presence and absence of 1% TiO2 or ZnO photocatalysts under UV irradiation at a wavelength of 306 nm. The five abundant pesticides were Atrazine (OCP), Chlorpyrifos methyl (OPP), Dimethoate (OPP), Heptachlor (OCP), and Methomyl (Carb). The results showed that photolysis of all pesticides was complete under UV radiation for irradiation times between 64–100 h. However, both photocatalysts enhanced photocatalytic degradation of the pesticides in comparison with photolysis. The pesticides were photocatalytically degraded completely within 20–24 h of irradiation. The TiO2 photocatalyst showed higher activity compared to ZnO. The organochlorine heptachlor, which is very toxic and persistent, was completely degraded within 30 h using TiO2 photocatalyst for the first time in soil. The mechanism of photocatalytic degradation of the pesticides was explained and the effects of different factors on the degradation process in the soil were discussed. Full article
Show Figures

Figure 1

20 pages, 18946 KiB  
Article
Studies on the Formation of Catalytically Active PGM Nanoparticles from Model Solutions as a Basis for the Recycling of Spent Catalysts
by Martyna Rzelewska-Piekut, Zuzanna Wiecka and Magdalena Regel-Rosocka
Molecules 2022, 27(2), 390; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27020390 - 08 Jan 2022
Cited by 3 | Viewed by 1798
Abstract
The paper presents basic studies on the precipitation of platinum, palladium, rhodium, and ruthenium nanoparticles from model acidic solutions using sodium borohydride, ascorbic acid, and sodium formate as reducing agents and polyvinylpyrrolidone as a stabilizing agent. The size of the obtained PGM particles [...] Read more.
The paper presents basic studies on the precipitation of platinum, palladium, rhodium, and ruthenium nanoparticles from model acidic solutions using sodium borohydride, ascorbic acid, and sodium formate as reducing agents and polyvinylpyrrolidone as a stabilizing agent. The size of the obtained PGM particles after precipitation with NaBH4 solution does not exceed 55 nm. NaBH4 is an efficient reducer; the precipitation yields for Pt, Pd, Ru, Rh are 75, 90, 65 and 85%, respectively. By precipitation with ascorbic acid, it is possible to efficiently separate Pt, Rh, and Ru from Pd from the two-component mixtures. The obtained Pt, Pd, and Rh precipitates have the catalytic ability of the catalytic reaction of p-nitrophenol to p-aminophenol. The morphological characteristic of the PGM precipitates was analyzed by AFM, SEM-EDS, and TEM. Full article
Show Figures

Figure 1

15 pages, 7584 KiB  
Article
Optimization of Fluoride Adsorption on Acid Modified Bentonite Clay Using Fixed-Bed Column by Response Surface Method
by Adane Woldemedhin Kalsido, Beteley Tekola Meshesha, Beshah M. Behailu and Esayas Alemayehu
Molecules 2021, 26(23), 7112; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules26237112 - 24 Nov 2021
Cited by 5 | Viewed by 1711
Abstract
Using small-scale batch tests, various researchers investigated the adsorptive removal of fluoride using low-cost clay minerals, such as Bentonite. In this study, Column adsorption studies were used to investigate the removal of fluoride from aqueous solution using acid-treated Bentonite (ATB). The effects of [...] Read more.
Using small-scale batch tests, various researchers investigated the adsorptive removal of fluoride using low-cost clay minerals, such as Bentonite. In this study, Column adsorption studies were used to investigate the removal of fluoride from aqueous solution using acid-treated Bentonite (ATB). The effects of initial fluoride concentration, flow rates, and bed depth on fluoride removal efficiency (R) and adsorption capability (qe) in continuous settings were investigated, and the optimal operating condition was determined using central composite design (CCD). The model’s suitability was determined by examining the relationship between experimental and expected response values. The analysis of variance was used to determine the importance of independent variables and their interactions. The optimal values were determined as the initial concentration of 5.51 mg/L, volumetric flow rate of 17.2 mL/min and adsorbent packed-bed depth of 8.88 cm, with % removal of 100, adsorptive capacity of 2.46 mg/g and desirability of 1.0. This output reveals that an acid activation of Bentonite has made the adsorbent successful for field application. Full article
Show Figures

Figure 1

Review

Jump to: Research

53 pages, 1894 KiB  
Review
Clay, Zeolite and Oxide Minerals: Natural Catalytic Materials for the Ozonation of Organic Pollutants
by Natalia Soledad Inchaurrondo and Josep Font
Molecules 2022, 27(7), 2151; https://0-doi-org.brum.beds.ac.uk/10.3390/molecules27072151 - 26 Mar 2022
Cited by 14 | Viewed by 3384
Abstract
Ozone has been successfully employed in water treatment due to its ability to oxidize a wide variety of refractory compounds. In order to increase the process efficiency and optimize its economy, the implementation of heterogeneous catalysts has been encouraged. In this context, the [...] Read more.
Ozone has been successfully employed in water treatment due to its ability to oxidize a wide variety of refractory compounds. In order to increase the process efficiency and optimize its economy, the implementation of heterogeneous catalysts has been encouraged. In this context, the use of cheap and widely available natural materials is a promising option that would promote the utilization of ozone in a cost-effective water treatment process. This review describes the use of natural clays, zeolites and oxides as supports or active catalysts in the ozonation process, with emphasis on the structural characteristics and modifications performed in the raw natural materials; the catalytic oxidation mechanism; effect of the operating parameters and degradation efficiency outcomes. According to the information compiled, more research in realistic scenarios is needed (i.e., real wastewater matrix or continuous operation in pilot scale) in order to transfer this technology to the treatment of real wastewater streams. Full article
Show Figures

Figure 1

Back to TopTop