Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
6.6
5.0
Journals
Polymers
Special Issues
Advanced Epoxy-Based Materials
share announcement

Advanced Epoxy-Based Materials

A special issue of Polymers (ISSN 2073-4360). This special issue belongs to the section "Polymer Applications".

Deadline for manuscript submissions: closed (31 March 2021) | Viewed by 62699

Special Issue Editor

Prof. Dr. Keon-Soo Jang

E-Mail Website1 Website2
Guest Editor
Department of Polymer Engineering, School of Chemical and Materials Engineering, The University of Suwon, 17 Wauan-gil, Bongdam-eup, Hwaseong 18323, Korea
Interests: functional epoxy resins for electronics packaging; extrusion; polymer composites
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Epoxy resins have gained broad use in electronic applications due to their beneficial properties such as excellent adhesion, low shrinkage, low dielectric constant, and outstanding mechanical and thermal properties. Advanced epoxy-based materials may include metal/epoxy, carbon-based fillers/epoxy, inorganic materials/epoxy, epoxy/polymeric materials, and fiber-reinforced epoxy composites. Advanced epoxy-based materials have a wide range of applications, such as adhesives for electronic devices, bio-based epoxy resins, paints/coatings, wind turbine composites, automotive/aerospace composites, and other adhesives for numerous applications. This Special Issue is highly motivated by the enlarged scope of utilization of advanced epoxy-based materials and will pay significant attention to new synthetic methods, compositions, functionalization/modification, structure–property relationships, and biomedical and energy applications.

Considering your prominent contributions to this field, I would like to cordially invite you to submit an article to this Special Issue. This Special Issue will publish full research papers, communications, and review articles. I would like to bring together a collection of comprehensive reviews from leading experts and up-to-date research from notable groups in the community.

The manuscript can be submitted now or up until the deadline and will be published on an ongoing basis. I would greatly appreciate your contribution to this Special Issue.

Prof. Dr. Keon-Soo Jang
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • thermoset polymers
  • epoxy composites
  • nanocomposites
  • synthesis
  • functionalization
  • characterization
  • electronic packaging
  • automotive
  • aerospace

Published Papers (18 papers)

Download All Papers
Order results
Result details
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:

Research

Jump to: Review

21 pages, 62981 KiB  
Article
Evaluation of Dispersion Methods and Mechanical Behaviour of Glass Fibre Composites with Embedded Self-Healing Systems
by Ionut Sebastian Vintila, Sorin Draghici, Horia Alexandru Petrescu, Alexandru Paraschiv, Mihaela Raluca Condruz, Lucia Raluca Maier, Adela Bara and Madalina Necolau
Polymers 2021, 13(10), 1642; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13101642 - 18 May 2021
Cited by 4 | Viewed by 2040
Abstract
The present paper is focused on evaluating the most suitable dispersion method in the epoxy matrix of two self-healing systems containing dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB) monomers encapsulated in a urea-formaldehyde (UF) shell, prior to integration, fabrication and impact testing of specimens. Both [...] Read more.
The present paper is focused on evaluating the most suitable dispersion method in the epoxy matrix of two self-healing systems containing dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB) monomers encapsulated in a urea-formaldehyde (UF) shell, prior to integration, fabrication and impact testing of specimens. Both microstructural analysis and three-point bending tests were performed to evaluate and assess the optimum dispersion method. It was found that ultrasonication damages the microcapsules of both healing systems, thus magnetic stirring was used for the dispersion of both healing systems in the epoxy matrix. Using magnetic dispersion, 5%, 7%, 10%, 12% and 15% volumes of microcapsules were embedded in glass fibre composites. Some of the samples were subjected to thermal cycling between −20 °C and +100 °C for 8 h, to evaluate the behaviour of both healing systems after temperature variation. Impact test results showed that the mechanical behaviour decreases with increasing microcapsule volume, while for specimens subjected to thermal cycling, the impact strength increases with microcapsule volume up to 10%, after which a severe drop in impact strength follows. Retesting after 48 h shows a major drop in mechanical properties in specimens containing 15% MUF-ENB microcapsules, up to total penetration of the specimen. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

17 pages, 574 KiB  
Article
Effects of SiO2 and ZnO Nanoparticles on Epoxy Coatings and Its Performance Investigation Using Thermal and Nanoindentation Technique
by Mohammad Asif Alam, Ubair Abdus Samad, Arfat Anis, Manawwer Alam, Mohd Ubaidullah and Saeed M. Al-Zahrani
Polymers 2021, 13(9), 1490; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13091490 - 06 May 2021
Cited by 18 | Viewed by 3355
Abstract
Synergistic formulations were developed with nano-pigments, and their effects on the mechanical properties on steel substrates and structures were evaluated. This paper provides a complete analysis of the epoxy coating, focusing on the incorporation of nano-pigments and their synergistic effects in obtaining higher [...] Read more.
Synergistic formulations were developed with nano-pigments, and their effects on the mechanical properties on steel substrates and structures were evaluated. This paper provides a complete analysis of the epoxy coating, focusing on the incorporation of nano-pigments and their synergistic effects in obtaining higher mechanical properties. This study reports the preparation of epoxy nano-silica composites, their characterization, and the development of coatings based on nano-silica and ZnO particles. In this composite, epoxy resin was incorporated with SiO2 as the main pigment and ZnO as a synergistic pigment to achieve high-performance epoxy coatings for multiple applications. The mechanical properties of these coatings (ESZ1–ESZ3) were evaluated by nanoindentation, and were used to measure the enhanced durability of nanocomposite coatings developed with synergistic formulations with different types of nanoparticles. Their performance was evaluated before and after exposure to a 3.5% NaCl solution to examine the changes of hardness and elastic modulus. The results showed that the nanoindentation technique, in conjunction with Fourier transform infrared spectroscopy and X-ray diffraction, could examine the durability and predict the service life of nanocomposite coatings. A correlation was observed between the modulus and hardness before and after exposing epoxy composite coatings (ESZ1–ESZ3) to a 3.5% NaCl solution. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

16 pages, 4308 KiB  
Article
Tailoring Epoxy Resin Foams by Pre-Curing with Neat Amine Hardeners and Its Derived Carbamates
by Christian Bethke, Sebastian Manfred Goller, Uy Lan Du Ngoc, Simon Tino Kaysser, Volker Altstädt and Holger Ruckdäschel
Polymers 2021, 13(8), 1348; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13081348 - 20 Apr 2021
Cited by 7 | Viewed by 3083
Abstract
The use of amine-based carbamates with their dual function, acting as amine curing agents and CO2 blowing agents after their decomposition without by-products, are promising for ecofriendly epoxy foams as high-performance materials. However, controlling cell morphology requires a proper adjustment of the [...] Read more.
The use of amine-based carbamates with their dual function, acting as amine curing agents and CO2 blowing agents after their decomposition without by-products, are promising for ecofriendly epoxy foams as high-performance materials. However, controlling cell morphology requires a proper adjustment of the viscosity at the foaming step. The viscosity is altered not only by blending neat amine and its derived carbamate at a fixed pre-curing time, but also by changing the pre-curing time at a fixed blend ratio. Within this study, diglycidylether of bisphenol A (DGEBA) epoxy resin is mixed with different blend ratios of isophorone diamine (IPDA) and its derived carbamate (B-IPDA). The systems are characterized by DSC and rheology experiments to identify the pre-curing effects on the derived epoxy foams. Epoxy foams at a blend ratio of 30/70w IPDA/B-IPDA showed the best foam morphology and an optimum Tg compared to other blend ratios. Furthermore, it was found that both pre-curing times, 2 h and 3 h, for the 30/70w IPDA/B-IPDA system reveal a more homogeneous cell structure. The study proves that the blending of neat amine and carbamate is beneficial for the foaming performance of carbamate systems. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

17 pages, 11010 KiB  
Article
Impact Modifiers and Compatibilizers for Versatile Epoxy-Based Adhesive Films with Curing and Deoxidizing Capabilities
by Bo-Young Lee, Dae-Hyeon Lee and Keon-Soo Jang
Polymers 2021, 13(7), 1129; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13071129 - 02 Apr 2021
Cited by 7 | Viewed by 2347
Abstract
Epoxy resins with acidic compounds feature adhesion, robustness, and deoxidizing ability. In this study, hybrid adhesive films with deoxidizing and curing capabilities for semiconductor packaging were fabricated. The compatibilizing effects and mechanical properties were chiefly investigated by using various additive binders (thermoplastic amorphous [...] Read more.
Epoxy resins with acidic compounds feature adhesion, robustness, and deoxidizing ability. In this study, hybrid adhesive films with deoxidizing and curing capabilities for semiconductor packaging were fabricated. The compatibilizing effects and mechanical properties were chiefly investigated by using various additive binders (thermoplastic amorphous polymers) and compatibilizing agents. The curing, deoxidizing, thermal, and rheological properties were systematically investigated. For uniform film formation and maximizing deoxidizing curable abilities, a thermoplastic--thermoset mixture containing a phenyl and carboxylic acid-based additive (benzoic acid), and a polycarbonate was chosen as the model adhesive film. Without either a phenyl or an acidic group in the compatibilizing agent, deoxidizing and compatibilizing effects were not achieved. The manufactured hybrid adhesive film can be effectively used, especially for electronic devices that require deoxidization and adhesion. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

15 pages, 5128 KiB  
Article
An Intelligent Fire-Protection Coating Based on Ammonium Polyphosphate/Epoxy Composites and Laser-Induced Graphene
by Weiwei Yang, Ying Liu, Jie Wei, Xueli Li, Nianhua Li and Jiping Liu
Polymers 2021, 13(6), 984; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13060984 - 23 Mar 2021
Cited by 4 | Viewed by 2653
Abstract
Fire-protection coatings with a self-monitoring ability play a critical role in safety and security. An intelligent fire-protection coating can protect humans from personal and property damage. In this work, we report the fabrication of a low-cost and facile intelligent fire coating based on [...] Read more.
Fire-protection coatings with a self-monitoring ability play a critical role in safety and security. An intelligent fire-protection coating can protect humans from personal and property damage. In this work, we report the fabrication of a low-cost and facile intelligent fire coating based on a composite of ammonium polyphosphate and epoxy (APP/EP). The composite was processed using laser scribing, which led to a laser-induced graphene (LIG) layer on the APP/EP surface via a photothermal effect. The C–O, C=O, P–O, and N−C bonds in the flame-retardant APP/EP composite were broken during the laser scribing, while the remaining carbon atoms recombined to generate the graphene layer. A proof-of-concept was achieved by demonstrating the use of LIG in supercapacitors, as a temperature sensor, and as a hazard detection device based on the shape memory effect of the APP/EP composite. The intelligent flame protection coating had a high flame retardancy, which increased the time to ignition (TTI) from 21 s to 57 s, and the limiting oxygen index (LOI) value increased to 37%. The total amount of heat and smoke released during combustion was effectively suppressed by ≈ 71.1% and ≈ 74.1%, respectively. The maximum mass-specific supercapacitance could reach 245.6 F·g−1. The additional LIG layer enables applications of the device as a LIG-APP/EP temperature sensor and allows for monitoring of the deformation according to its shape memory effect. The direct laser scribing of graphene from APP/EP in an air atmosphere provides a convenient and practical approach for the fabrication of flame-retardant electronics. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

19 pages, 9918 KiB  
Article
Development and Analysis of Mechanical Properties of Caryota and Sisal Natural Fibers Reinforced Epoxy Hybrid Composites
by Ayyappa Atmakuri, Arvydas Palevicius, Lalitnarayan Kolli, Andrius Vilkauskas and Giedrius Janusas
Polymers 2021, 13(6), 864; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13060864 - 11 Mar 2021
Cited by 19 | Viewed by 2664
Abstract
In recent years, natural fiber reinforced polymer composites have gained much attention over synthetic fiber composites because of their many advantages such as low-cost, light in weight, non-toxic, non-abrasive, and bio-degradable properties. Many researchers have found interest in using epoxy resin for composite [...] Read more.
In recent years, natural fiber reinforced polymer composites have gained much attention over synthetic fiber composites because of their many advantages such as low-cost, light in weight, non-toxic, non-abrasive, and bio-degradable properties. Many researchers have found interest in using epoxy resin for composite fabrication over other thermosetting and thermoplastic polymers due to its dimensional stability and mechanical properties. In this research work, the mechanical and moisture properties of Caryota and sisal fiber-reinforced epoxy resin hybrid composites were investigated. The main objective of these studies is to develop hybrid composites and exploit their importance over single fiber composites. The Caryota and sisal fiber reinforced epoxy resin composites were fabricated by using the hand lay-up technique. A total of five different samples (40C/0S, 25C/15S, 20C/20S, 15C/25S, 0C/40S) were developed based on the rule of hybridization. The samples were allowed for testing to evaluate their mechanical, moisture properties and the morphology was studied by using the scanning electron microscope analysis. It was observed that hybrid composites have shown improved mechanical properties over the single fiber (Individual fiber) composites. The moisture studies stated that all the composites were responded to the water absorption but single fiber composites absorbed more moisture than hybrid composites. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

14 pages, 44423 KiB  
Article
Mechanical Properties of the Carbon Nanotube Modified Epoxy–Carbon Fiber Unidirectional Prepreg Laminates
by Gökhan Bakis, Jan-Felix Wendel, Rico Zeiler, Alper Aksit, Markus Häublein, Martin Demleitner, Jan Benra, Stefan Forero, Walter Schütz and Volker Altstädt
Polymers 2021, 13(5), 770; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13050770 - 02 Mar 2021
Cited by 21 | Viewed by 3814
Abstract
The effect of plasma treatment of the multi-walled carbon nanotube (MWCNT) surface on the fracture toughness of an aerospace grade epoxy resin and its unidirectional (UD) carbon fiber prepreg laminates has attracted scientific interest. A prepreg route eliminates the possible risk of carbon [...] Read more.
The effect of plasma treatment of the multi-walled carbon nanotube (MWCNT) surface on the fracture toughness of an aerospace grade epoxy resin and its unidirectional (UD) carbon fiber prepreg laminates has attracted scientific interest. A prepreg route eliminates the possible risk of carbon nanotube filtration by unidirectional carbon fibers. X-ray photoelectron spectroscopy results suggested that oxygen atom concentration at the nanotube surface was increased from 0.9% to 3.7% after plasma modification of the carbon nanotubes. A low number (up to 0.5 wt.%) of MWCNTs was added to epoxy resin and their carbon fiber prepreg laminates. Transmission electron micrographs revealed that the plasma treatment resulted in a better dispersion and distribution of MWCNTs in the epoxy resin. Plasma-treated MWCNTs resulted in a more pronounced resistance to the crack propagation of epoxy resin. During the production of the reference and nanotube-modified prepregs, a comparable prepreg quality was achieved. Neat nanotubes agglomerated strongly in the resin-rich regions of laminates lowering the interlaminar fracture toughness under mode I and mode II loading. However, plasma-treated nanotubes were found mostly as single particles in the resin-rich regions of laminates promoting higher energy dissipation during crack propagation via a CNT pull-out mechanism. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

12 pages, 38193 KiB  
Article
Highly Thermal Conductive and Electrical Insulating Epoxy Composites with a Three-Dimensional Filler Network by Sintering Silver Nanowires on Aluminum Nitride Surface
by Wondu Lee and Jooheon Kim
Polymers 2021, 13(5), 694; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13050694 - 25 Feb 2021
Cited by 18 | Viewed by 3231
Abstract
In this study, a new fabrication technique for three-dimensional (3D) filler networks was employed for the first time to prepare thermally conductive composites. A silver nanowire (AgNW)– aluminum nitride (AlN) (AA) filler was produced by a polyol method and hot-pressed in mold to [...] Read more.
In this study, a new fabrication technique for three-dimensional (3D) filler networks was employed for the first time to prepare thermally conductive composites. A silver nanowire (AgNW)– aluminum nitride (AlN) (AA) filler was produced by a polyol method and hot-pressed in mold to connect the adjacent fillers by sintering AgNWs on the AlN surface. The sintered AA filler formed a 3D network, which was subsequently impregnated with epoxy (EP) resin. The fabricated EP/AA 3D network composite exhibited a perpendicular direction thermal conductivity of 4.49 W m−1 K−1 at a filler content of 400 mg (49.86 vol.%) representing an enhancement of 1973% with respect to the thermal conductivity of neat EP (0.22 W m−1 K−1). Moreover, the EP/AA decreased the operating temperature of the central processing unit (CPU) from 86.2 to 64.6 °C as a thermal interface material (TIM). The thermal stability was enhanced by 27.28% (99 °C) and the composites showed insulating after EP infiltration owing to the good insulation properties of AlN and EP. Therefore, these fascinating thermal and insulating performances have a great potential for next generation heat management application. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

11 pages, 1341 KiB  
Article
Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate
by Olga B. Nazarenko, Yulia A. Amelkovich, Alexander G. Bannov, Irina S. Berdyugina and Visakh P. Maniyan
Polymers 2021, 13(4), 638; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13040638 - 21 Feb 2021
Cited by 12 | Viewed by 2289
Abstract
Epoxy composites filled with 0.5 wt% of multi-walled carbon nanotubes (MWCNTs), 10 and 15 wt% of boric acid and sodium bicarbonate separately, as well as composites filled with a combination of MWCNTs-boric acid and MWCNTs-sodium bicarbonate were prepared. The thermal behavior of the [...] Read more.
Epoxy composites filled with 0.5 wt% of multi-walled carbon nanotubes (MWCNTs), 10 and 15 wt% of boric acid and sodium bicarbonate separately, as well as composites filled with a combination of MWCNTs-boric acid and MWCNTs-sodium bicarbonate were prepared. The thermal behavior of the prepared samples was investigated under heating in oxidative environment using thermogravimetric analysis. The hardness was measured using the Shore D hardness test. To evaluate the flammability of the samples, the ignition temperature and time-to-ignition were determined. It was concluded that sodium bicarbonate in the studied concentrations (10 and 15 wt%) is not appropriate for use as a filler capable of improving the thermooxidative stability and reducing the flammability of epoxy polymers. The improvement in the thermal properties can be achieved by using the combination of boric acid and multi-walled carbon nanotubes as fillers. The thermooxidative destruction of the samples filled with boric acid passes more slowly and more evenly via the formation of B2O3 as a result of its decomposition. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

13 pages, 5199 KiB  
Article
Comparative Study on Toughening Effect of PTS and PTK in Various Epoxy Resins
by Woong Kwon, Minwoo Han, Jongwon Kim and Euigyung Jeong
Polymers 2021, 13(4), 518; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13040518 - 09 Feb 2021
Cited by 3 | Viewed by 2207
Abstract
This study investigated the toughening effect of in situ polytriazoleketone (PTK) and polytriazolesulfone (PTS) toughening agent when applied to various epoxy resins, such as diglycidyl ether of bisphenol A (DGEBA), diglycidyl ether of bisphenol F (DGEBF), and triglycidyl p-aminophenol (TGAP) with 3,3′-diaminodiphenylsulfone [...] Read more.
This study investigated the toughening effect of in situ polytriazoleketone (PTK) and polytriazolesulfone (PTS) toughening agent when applied to various epoxy resins, such as diglycidyl ether of bisphenol A (DGEBA), diglycidyl ether of bisphenol F (DGEBF), and triglycidyl p-aminophenol (TGAP) with 3,3′-diaminodiphenylsulfone as a curing agent. The fracture toughness, tensile properties, and thermal properties of the prepared epoxy samples were evaluated and compared. When PTK was mixed with DGEBF, the fracture toughness was improved by 27% with 8.6% increased tensile strength compared to the untoughened DGEBF. When PTS was mixed with TGAP, the fracture toughness was improved by 51% without decreasing tensile properties compared to the untoughened TGAP. However, when PTK or PTS was mixed with other epoxy resins, the fracture toughness decreased or improved with decreasing tensile properties. This is attributed to the poor miscibility between the solid-state monomer of PTK (4,4′-bis(propynyloxy)benzophenone (PBP)) or PTS (4,4′-sulfonylbis(propynyloxy)benzene (SPB)) and the epoxy resin, resulting in the polymerization of low molecular weight PTK or PTS in epoxy resin. Therefore, the toughening effect of PTK or PTS can be maximized by the appropriate selection of epoxy resin based on the miscibility between PBP or SPB and the resin. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

14 pages, 4968 KiB  
Article
The Effect of the Modification of Mica by High-Temperature Mechanochemistry on the Anticorrosion Performance of Epoxy Coatings
by Yahui Cai, Fandi Meng, Li Liu, Rui Liu, Yu Cui, Hongpeng Zheng and Fuhui Wang
Polymers 2021, 13(3), 378; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13030378 - 26 Jan 2021
Cited by 11 | Viewed by 2619
Abstract
Epoxy resin was directly grafted onto the surface of mica powder by high-temperature mechanical ball milling. This method was used to achieve a chemical reaction between the epoxy resin and mica that cannot be carried out under conventional circumstances. The results show that [...] Read more.
Epoxy resin was directly grafted onto the surface of mica powder by high-temperature mechanical ball milling. This method was used to achieve a chemical reaction between the epoxy resin and mica that cannot be carried out under conventional circumstances. The results show that an epoxy resin layer with a thickness of approximately 10 nm formed on the surface of the mica. This modified mica filler exhibited a significant change in its hydrophilic properties. The dispersion of mica and its compatibility with organic coatings also significantly improved. In addition, the modified mica filler was added to the epoxy coating. The improvement of the coating’s compactness and toughness is the reason for its anti-corrosion performance enhancement. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

21 pages, 11353 KiB  
Article
Solvent-Free Ultrasonic Dispersion of Nanofillers in Epoxy Matrix
by Benjamin Zanghellini, Patrick Knaack, Sebastian Schörpf, Karl-Heinz Semlitsch, Helga C. Lichtenegger, Bernhard Praher, Maria Omastova and Harald Rennhofer
Polymers 2021, 13(2), 308; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13020308 - 19 Jan 2021
Cited by 9 | Viewed by 3583
Abstract
Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of [...] Read more.
Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of a three-roll mill, which is a well-established method and results in agglomerates below 5 µm. Nevertheless, this process is time-consuming and thus a limiting factor for industrial applications. Our aim was to establish an easy and efficient ultrasonic dispersion process, characterize the dispersion parameters, and compare both methods, ultrasonication and the three-roll mill. We applied rheological tests and analyzed the agglomerate sizes by an image fit of the microscopy images. All these analyses combined deliver a valuable set of information about the dispersion’s quality and, therefore, allows the improvement and further adaptation of the dispersion process. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

13 pages, 2295 KiB  
Article
Epoxy-Based Structural Self-Adhesive Tapes Modified with Acrylic Syrups Prepared via a Free Radical Photopolymerization Process
by Konrad Gziut, Agnieszka Kowalczyk, Beata Schmidt, Krzysztof Kowalczyk and Mateusz Weisbrodt
Polymers 2021, 13(2), 189; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13020189 - 07 Jan 2021
Cited by 8 | Viewed by 2818
Abstract
New modifiers (i.e., acrylic syrups; ASs) of epoxy-resin-based thermally curable structural self-adhesive tapes (SATs) were prepared via a free radical bulk polymerization (FRBP) of n-butyl acrylate, butyl methacrylate, glycidyl methacrylate, and hydroxybutyl acrylate. In the process, two kinds of UV-photoinitiators (i.e., monoacylphosphine oxide/Omnirad [...] Read more.
New modifiers (i.e., acrylic syrups; ASs) of epoxy-resin-based thermally curable structural self-adhesive tapes (SATs) were prepared via a free radical bulk polymerization (FRBP) of n-butyl acrylate, butyl methacrylate, glycidyl methacrylate, and hydroxybutyl acrylate. In the process, two kinds of UV-photoinitiators (i.e., monoacylphosphine oxide/Omnirad TPO and bisacylphosphine oxide/Omnirad 819) and various mixing speed of the monomers mixture (200–1000 rpm) were applied. The TPO-based syrups exhibited a lower copolymers content (10–24 wt%), dynamic viscosity (<0.1 Pa·s), molecular weights (Mn and Mw, and polydispersity (1.9–2.5) than these with Omnirad 819. Additionally, the higher mixing speed significantly reduced monomers conversion and viscosity of ASs as well as molecular weights of the acrylate copolymers. These parameters influenced the properties of thermally uncured (e.g., adhesion) and thermally cured SATs (shear strength of aluminum/SAT/aluminum overlap joints). Better self-adhesive features were observed for SATs-TPO (based on ASs with lower monomers conversion, Mn and Mw); however, a slightly higher shear strength was noted for the thermally cured SAT-819 (ASs with higher monomers conversion, Mn and Mw). An impact of polydispersity of the acrylate copolymers as well as crosslinking degree of thermally cured SATs on the mechanical strength was also revealed. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

11 pages, 20653 KiB  
Article
Using Dihydrazides as Thermal Latent Curing Agents in Epoxy-Based Sealing Materials for Liquid Crystal Displays
by Jun Hyup Lee
Polymers 2021, 13(1), 109; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13010109 - 29 Dec 2020
Cited by 3 | Viewed by 3370
Abstract
In this study, highly adhesive epoxy-based sealing materials for liquid crystal (LC) displays were fabricated using different types of dihydrazides as thermal latent curing agents. Their curing characteristics, mechanical properties, LC contamination levels, and electro-optical characteristics were investigated depending on the chemical structure [...] Read more.
In this study, highly adhesive epoxy-based sealing materials for liquid crystal (LC) displays were fabricated using different types of dihydrazides as thermal latent curing agents. Their curing characteristics, mechanical properties, LC contamination levels, and electro-optical characteristics were investigated depending on the chemical structure of dihydrazides. The epoxy-based sealing material containing a dihydrazide derivative with a bulky heterocyclic ring afforded a high heat curing conversion of 90.4%, high adhesion strength of 54.3 kgf cm−2, and a high elongation of 57.3% due to the relatively low melting characteristic under heat treatment compared to those involving dihydrazides with short aliphatic or aromatic spacers. In addition, the proposed sealing material exhibited an extremely low LC contamination level of 9 µm, which is essential to the successful operation of LC displays. With respect to electro-optical properties of the LC device, it was found that a dihydrazide derivative with a bulky heterocyclic ring afforded a normal voltage-dependent transmittance curve and fast response time due to the prevention of abnormal homogeneous LC alignment. This study developed highly adhesive and robust epoxy-based sealing materials based on the use of dihydrazides as thermal latent curing agents for advanced LC displays. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

14 pages, 2645 KiB  
Article
Build-To-Specification Vanillin and Phloroglucinol Derived Biobased Epoxy-Amine Vitrimers
by Aratz Genua, Sarah Montes, Itxaso Azcune, Alaitz Rekondo, Samuel Malburet, Bénédicte Daydé-Cazals and Alain Graillot
Polymers 2020, 12(11), 2645; https://0-doi-org.brum.beds.ac.uk/10.3390/polym12112645 - 10 Nov 2020
Cited by 18 | Viewed by 4404
Abstract
Epoxy resins are widely used in the composite industry due to their dimensional stability, chemical resistance, and thermo-mechanical properties. However, these thermoset resins have important drawbacks. (i) The vast majority of epoxy matrices are based on non-renewable fossil-derived materials, and (ii) the highly [...] Read more.
Epoxy resins are widely used in the composite industry due to their dimensional stability, chemical resistance, and thermo-mechanical properties. However, these thermoset resins have important drawbacks. (i) The vast majority of epoxy matrices are based on non-renewable fossil-derived materials, and (ii) the highly cross-linked molecular architecture hinders their reprocessing, repairing, and recycling. In this paper, those two aspects are addressed by combining novel biobased epoxy monomers derived from renewable resources and dynamic crosslinks. Vanillin (lignin) and phloroglucinol (sugar bioconversion) precursors have been used to develop bi- and tri-functional epoxy monomers, diglycidyl ether of vanillyl alcohol (DGEVA) and phloroglucinol triepoxy (PHTE) respectively. Additionally, reversible covalent bonds have been incorporated in the network by using an aromatic disulfide-based diamine hardener. Four epoxy matrices with different ratios of epoxy monomers (DGEVA/PHTE wt%: 100/0, 60/40, 40/60, and 0/100) were developed and fully characterized in terms of thermal and mechanical properties. We demonstrate that their performances are comparable to those of commonly used fossil fuel-based epoxy thermosets with additional advanced reprocessing functionalities. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

Review

Jump to: Research

35 pages, 10067 KiB  
Review
Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites
by Sanjeev Kumar, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Yadav and Jerzy Winczek
Polymers 2021, 13(9), 1369; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13091369 - 22 Apr 2021
Cited by 45 | Viewed by 6295
Abstract
In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are [...] Read more.
In recent times, demand for light weight and high strength materials fabricated from natural fibres has increased tremendously. The use of natural fibres has rapidly increased due to their high availability, low density, and renewable capability over synthetic fibre. Natural leaf fibres are easy to extract from the plant (retting process is easy), which offers high stiffness, less energy consumption, less health risk, environment friendly, and better insulation property than the synthetic fibre-based composite. Natural leaf fibre composites have low machining wear with low cost and excellent performance in engineering applications, and hence established as superior reinforcing materials compared to other plant fibres. In this review, the physical and mechanical properties of different natural leaf fibre-based composites are addressed. The influences of fibre loading and fibre length on mechanical properties are discussed for different matrices-based composite materials. The surface modifications of natural fibre also play a crucial role in improving physical and mechanical properties regarding composite materials due to improved fibre/matrix adhesion. Additionally, the present review also deals with the effect of silane-treated leaf fibre-reinforced thermoset composite, which play an important role in enhancing the mechanical and physical properties of the composites. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Figure 1

13 pages, 11050 KiB  
Review
Advances in Liquid Crystalline Epoxy Resins for High Thermal Conductivity
by Younggi Hong and Munju Goh
Polymers 2021, 13(8), 1302; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13081302 - 15 Apr 2021
Cited by 27 | Viewed by 5430
Abstract
Epoxy resin (EP) is one of the most famous thermoset materials. In general, because EP has a three-dimensional random network, it possesses thermal properties similar to those of a typical heat insulator. Recently, there has been substantial interest in controlling the network structure [...] Read more.
Epoxy resin (EP) is one of the most famous thermoset materials. In general, because EP has a three-dimensional random network, it possesses thermal properties similar to those of a typical heat insulator. Recently, there has been substantial interest in controlling the network structure of EP to create new functionalities. Indeed, the modified EP, represented as liquid crystalline epoxy (LCE), is considered promising for producing novel functionalities, which cannot be obtained from conventional EPs, by replacing the random network structure with an oriented one. In this paper, we review the current progress in the field of LCEs and their application to highly thermally conductive composite materials. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

30 pages, 6729 KiB  
Review
Recent Research Progress on Lignin-Derived Resins for Natural Fiber Composite Applications
by Bijender Kumar, Dickens O. Agumba, Duc H. Pham, Muhammad Latif, Dinesh, Hyun Chan Kim, Hussein Alrobei and Jaehwan Kim
Polymers 2021, 13(7), 1162; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13071162 - 05 Apr 2021
Cited by 22 | Viewed by 4260
Abstract
By increasing the environmental concerns and depletion of petroleum resources, bio-based resins have gained interest. Recently, lignin, vanillin (4-hydroxy-3-methoxybenzaldehyde), and divanillin (6,6′-dihydroxy-5,5′-dimethoxybiphenyl-3,3′-dicarbaldehyde)-based resins have attracted attention due to the low cost, environmental benefits, good thermal stability, excellent mechanical properties, and suitability for high-performance [...] Read more.
By increasing the environmental concerns and depletion of petroleum resources, bio-based resins have gained interest. Recently, lignin, vanillin (4-hydroxy-3-methoxybenzaldehyde), and divanillin (6,6′-dihydroxy-5,5′-dimethoxybiphenyl-3,3′-dicarbaldehyde)-based resins have attracted attention due to the low cost, environmental benefits, good thermal stability, excellent mechanical properties, and suitability for high-performance natural fiber composite applications. This review highlights the recent use of lignin, vanillin, and divanillin-based resins with natural fiber composites and their synthesized processes. Finally, discussions are made on the curing kinetics, mechanical properties, flame retardancy, and bio-based resins’ adhesion property. Full article
(This article belongs to the Special Issue Advanced Epoxy-Based Materials)
►▼ Show Figures

Graphical abstract

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-18
Back to TopTop