Polymeric Self-Healing Materials

A special issue of Polymers (ISSN 2073-4360). This special issue belongs to the section "Polymer Applications".

Deadline for manuscript submissions: closed (31 August 2022) | Viewed by 30621

Special Issue Editors

Department of Industrial Engineering, University of Salerno, 84084 Fisciano, SA, Italy
Interests: physico-chemical properties, structure, morphology and durability of macromolecular systems; design and development of smart and/or nanostructured materials; synthesis of self-healing microcapsules; multifunctional carbon-based hybrid materials for aircraft lightning strike protection; thermosetting composites with self-restoration function capable at very low temperatures; conductive and flame retardant nanofilled aeronautic composites; FTIR spectroscopy; morphological analysis by Atomic Force Microscopy (AFM) and Tunneling Atomic Force Microscopy (TUNA) techniques
Special Issues, Collections and Topics in MDPI journals
Institute of Polymers, Composites and Biomaterials (IPCB), National Research Council of Italy (CNR), Via Previati 1/C, 23900 Lecco, Italy
Interests: process–properties relashionships; morphology and properties of polymeric materials; polymer processing; injection and compression moulding; nanofunctionalized polymer materials for barrier and electrical applications; polymer (bio/photo)-degradation; bionanocomposites materials; thermomechanical properties; biodegradable materials; high performances composite materials; materials for sensing; materials for drug delivery; self-healing materials
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

A self-healing material has the ability to restore lost or degraded performance using resources inherently available in the material itself. Ideally, this ability should be fast and be able to occur for an infinite number of cycles without any external stimuli. Unfortunately, persistent irreversible mechanisms, low chemical stability, and weak mechanical performance mean that the present systems are far from having these capabilities.

Polymers are the materials most broadly used in daily life. They have several advantages, such as inexpensive cost, good processability, and low density. The incorporation of self-healing mechanisms in polymeric materials promises to further expand their use by extending the lifetime of structural and functional polymer-based systems. This Special Issue aims to represent the state of the art and provide systematic information on self-healing mechanisms, characterization techniques, and structure–property relationships. We hope to provide the community with new ideas and perspectives, as we are firmly convinced that these bioinspired materials can be applied in most modern engineering applications.

Dr. Marialuigia Raimondo
Dr. Andrea Sorrentino
Guest Editors

Keywords

  • self-healing materials
  • bioinspired materials
  • healing mechanisms
  • supramolecular self-healing
  • capsule-based self-healing materials
  • intrinsic self-healing materials
  • vascular self-healing materials
  • characterization techniques of healing performance
  • self-healable fiber-reinforced resins for aerospace applications
  • self-healing conductive epoxy systems

Published Papers (9 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

18 pages, 7022 KiB  
Article
Multiple Self-Healing Effects of Water-Absorbing Microcapsules in Cementitious Materials
by Qianjin Mao, Jiayi Chen, Wenwen Wu, Runfeng Li, Shuqing Shi, Ziming Wang and Suping Cui
Polymers 2023, 15(2), 428; https://0-doi-org.brum.beds.ac.uk/10.3390/polym15020428 - 13 Jan 2023
Cited by 3 | Viewed by 1672
Abstract
Concrete cracking has a negative impact on the durability of the structure. Pre-implanting microcapsules containing healing agents into the concrete are expected to induce the cracks to self-heal. However, the self-healing effect can potentially be influenced by several environmental conditions, thus limiting its [...] Read more.
Concrete cracking has a negative impact on the durability of the structure. Pre-implanting microcapsules containing healing agents into the concrete are expected to induce the cracks to self-heal. However, the self-healing effect can potentially be influenced by several environmental conditions, thus limiting its applications. To address these challenges, we developed a new type of water-absorbing microcapsules, using calcium alginate hydrogel as the wall material and an adhesive epoxy polymer as the core material, to improve the self-healing adaptability in complex and changing environments. We explored the healing properties and mechanism of cementitious materials containing microcapsules under various environmental conditions. The experimental results showed that the water-absorbent microcapsules exhibit multiple self-healing effects under different external conditions: (1) in an anhydrous environment, fissures prompted the activation of microcapsules, and the epoxy polymer flowed out to seal the cracks. (2) When exposed to water, the microcapsules inflated to form a seal around the fissures. (3) The microcapsules facilitated the autogenous healing of cracks in the cementitious material when wet and dry conditions were alternated. The three self-healing mechanisms worked synergistically and contributed to the effective restoration of the impermeability and strength of concrete under different environments. Particularly, the recovery of compressive strength and impermeability exceeded 100% when the microcapsule content was 4% and the pre-pressure was 40% of fmax. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Figure 1

13 pages, 1480 KiB  
Article
Synthesis and Characterization of Quadrupolar-Hydrogen-Bonded Polymeric Ionic Liquids for Potential Self-Healing Electrolytes
by Chenming Li, Rajesh Bhandary, Anja Marinow, Dmitrii Ivanov, Mengxue Du, René Androsch and Wolfgang H. Binder
Polymers 2022, 14(19), 4090; https://0-doi-org.brum.beds.ac.uk/10.3390/polym14194090 - 29 Sep 2022
Cited by 5 | Viewed by 1901
Abstract
Within the era of battery technology, the urgent demand for improved and safer electrolytes is immanent. In this work, novel electrolytes, based on pyrrolidinium-bistrifluoromethanesulfonyl-imide polymeric ionic liquids (POILs), equipped with quadrupolar hydrogen-bonding moieties of ureido-pyrimidinone (UPy) to mediate self-healing properties were synthesized. Reversible [...] Read more.
Within the era of battery technology, the urgent demand for improved and safer electrolytes is immanent. In this work, novel electrolytes, based on pyrrolidinium-bistrifluoromethanesulfonyl-imide polymeric ionic liquids (POILs), equipped with quadrupolar hydrogen-bonding moieties of ureido-pyrimidinone (UPy) to mediate self-healing properties were synthesized. Reversible addition–fragmentation chain-transfer (RAFT) polymerization was employed using S,S-dibenzyl trithiocarbonate as the chain transfer agent to produce precise POILs with a defined amount of UPy and POIL-moieties. Kinetic studies revealed an excellent control over molecular weight and polydispersity in all polymerizations, with a preferable incorporation of UPy monomers in the copolymerizations together with the ionic monomers. Thermogravimetric analysis proved an excellent thermal stability of the polymeric ionic liquids up to 360 °C. By combining the results from differential scanning calorimetry (DSC), broadband dielectric spectroscopy (BDS), and rheology, a decoupled conductivity of the POILs from glass transition was revealed. While the molecular weight was found to exert the main influence on ionic conductivity, the ultimate strength and the self-healing efficiency (of up to 88%) were also affected, as quantified by tensile tests for both pristine and self-healed samples, evidencing a rational design of self-healing electrolytes bearing both hydrogen bonding moieties and low-molecular-weight polymeric ionic liquids. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

25 pages, 13219 KiB  
Article
Tunneling Atomic Force Microscopy Analysis of Supramolecular Self-Responsive Nanocomposites
by Marialuigia Raimondo, Elisa Calabrese, Wolfgang H. Binder, Philipp Michael, Sravendra Rana and Liberata Guadagno
Polymers 2021, 13(9), 1401; https://0-doi-org.brum.beds.ac.uk/10.3390/polym13091401 - 26 Apr 2021
Cited by 11 | Viewed by 2090
Abstract
A big step forward for composite application in the sector of structural materials is given by the use of Multi-Wall Carbon Nanotubes (MWCNTs) functionalized with hydrogen bonding moieties, such as barbiturate and thymine, to activate self-healing mechanisms and integrate additional functionalities. These materials [...] Read more.
A big step forward for composite application in the sector of structural materials is given by the use of Multi-Wall Carbon Nanotubes (MWCNTs) functionalized with hydrogen bonding moieties, such as barbiturate and thymine, to activate self-healing mechanisms and integrate additional functionalities. These materials with multiple healing properties at the same damaged site, imparted by hydrogen bonds, will also have the potential to improve material reliability, extend the service life, reduce replacement costs, and improve product safety. This revolutionary approach is obtained by integrating the non-covalent interactions coupled with the conventional covalent approach used to cross-link the polymer. The objective of this work is to characterize rubber-toughened supramolecular self-healing epoxy formulations based on unfunctionalized and functionalized MWCNTs using Tunneling Atomic Force Microscopy (TUNA). This advanced technique clearly shows the effect produced by the hydrogen bonding moieties acting as reversible healing elements by their simultaneous donor and acceptor character, and covalently linked to MWCNTs to originate self-healing nanocomposites. In particular, TUNA proved to be very effective for the morphology study of both the unfunctionalized and functionalized carbon nanotube-based conductive networks, thus providing useful insights aimed at understanding the influence of the intrinsic nature of the nanocharge on the final properties of the multifunctional composites. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

27 pages, 13781 KiB  
Article
The Synthetization and Analysis of Dicyclopentadiene and Ethylidene-Norbornene Microcapsule Systems
by Ionut Sebastian Vintila, Horia Iovu, Andreea Alcea, Andreia Cucuruz, Andrei Cristian Mandoc and Bogdan Stefan Vasile
Polymers 2020, 12(5), 1052; https://0-doi-org.brum.beds.ac.uk/10.3390/polym12051052 - 04 May 2020
Cited by 11 | Viewed by 2927
Abstract
The activities of this paper were focused on an in-situ fabrication process for producing two self-healing systems containing dicyclopentadiene and 5-ethylidene-2-norbornene monomers encapsulated in a urea-formaldehyde shell and integration methods applied in the epoxy matrix to analyse and compare the influences of their [...] Read more.
The activities of this paper were focused on an in-situ fabrication process for producing two self-healing systems containing dicyclopentadiene and 5-ethylidene-2-norbornene monomers encapsulated in a urea-formaldehyde shell and integration methods applied in the epoxy matrix to analyse and compare the influences of their integration into the neat epoxy matrix. The self-healing systems were first synthesized according to a literature review, and subsequently, an optimization process was conducted for the fabrication process. Neat epoxy specimens were fabricated as reference specimens and subjected to flexural tests. Several integration methods for incorporating the self-healing systems into the epoxy resin were investigated. The optimal method presenting the best dispersion of the healing system was achieved by reducing the viscosity of the epoxy matrix with 10 vol % acetone solution, the addition of a microcapsule in the matrix, and homogenization at 60 °C at 100 rpm. Thermal analysis was performed in order to observe the mass loss obtained with an increasing temperature and phase changes for both poly-urea-formaldehyde (PUF)-dicyclopentadiene (DCPD) and melamine-urea-formaldehyde (MUF)-5-ethylidene-2-norbornene (ENB) systems. The thermogravimetric analysis performed for the PUF-DCPD system indicates a total loss of mass in the range of 30–500 °C of 72.604% and for the MUF-ENB system, indicates a total mass loss in the range of 30–500 °C of 74.093%. Three-point bending tests showed higher mechanical properties for PUF-DCPD (80%) than MUF-ENB (40%) compared to the neat epoxy systems. Numerical simulations were performed to obtain a better understanding of the microcapsule behavior when embedded in an epoxy matrix. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

11 pages, 2243 KiB  
Article
Lanthanoids Goes Healing: Lanthanoidic Metallopolymers and Their Scratch Closure Behavior
by Stefan Götz, Stefan Zechel, Martin D. Hager and Ulrich S. Schubert
Polymers 2020, 12(4), 838; https://0-doi-org.brum.beds.ac.uk/10.3390/polym12040838 - 06 Apr 2020
Cited by 4 | Viewed by 2142
Abstract
Metallopolymers represent an interesting combination of inorganic metal complexes and polymers resulting in a variety of outstanding properties and applications. One field of interest are stimuli-responsive materials and, in particular, self-healing polymers. These systems could be achieved by the incorporation of terpyridine–lanthanoid complexes [...] Read more.
Metallopolymers represent an interesting combination of inorganic metal complexes and polymers resulting in a variety of outstanding properties and applications. One field of interest are stimuli-responsive materials and, in particular, self-healing polymers. These systems could be achieved by the incorporation of terpyridine–lanthanoid complexes of Eu (III), Tb (III), and Dy (III) in the side chains of well-defined copolymers, which were prepared applying the reversible addition fragmentation chain-transfer (RAFT)-polymerization technique. The metal complexes crosslink the polymer chains in order to form reversible supramolecular networks. These dynamics enable the self-healing behavior. The information on composition, reversibility, and stability of the complexes was obtained by isothermal titration calorimetry (ITC). Moreover, self-healing experiments were performed by using 3D-microscopy and indentation. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

12 pages, 3625 KiB  
Article
Dual-Layer Approach toward Self-Healing and Self-Cleaning Polyurethane Thermosets
by Muhammad Naveed, Muhammad Rabnawaz, Ajmir Khan and Mohammad O. Tuhin
Polymers 2019, 11(11), 1849; https://0-doi-org.brum.beds.ac.uk/10.3390/polym11111849 - 09 Nov 2019
Cited by 23 | Viewed by 4068
Abstract
There is an urgent need for coatings that exhibit both self-healing as well as self-cleaning properties as they can be used for a wide range of applications. Herein we report a novel approach toward fabricating polyurethane thermosets possessing both self-cleaning and self-healing properties. [...] Read more.
There is an urgent need for coatings that exhibit both self-healing as well as self-cleaning properties as they can be used for a wide range of applications. Herein we report a novel approach toward fabricating polyurethane thermosets possessing both self-cleaning and self-healing properties. The desired coating was achieved via casting a bottom layer of self-healable polyurethanes comprised of reversible phenolic urethane bonds followed by a subsequent dip-coating of the prepared layer in a solution of bis(3-aminopropyl)-terminated polydimethylsiloxane (PDMS-NH2). The PDMS was used to impart self-cleaning properties to the coating. While the self-healing behavior of the bottom polyurethane layer is achieved through phenolic urethane chemistry, via the exchange of phenolic urethane moieties. The prepared coatings were tested for their optical, mechanical, self-healing, and self-cleaning properties using a variety of characterization methods, which confirmed the successful fabrication of novel self-cleaning and self-healing clear urethane coatings. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

19 pages, 5877 KiB  
Article
The Mechanical Properties of Poly (Urea-Formaldehyde) Incorporated with Nano-SiO2 by Molecular Dynamics Simulation
by Yanfang Zhang, Youyuan Wang, Yudong Li and Zhanxi Zhang
Polymers 2019, 11(9), 1447; https://0-doi-org.brum.beds.ac.uk/10.3390/polym11091447 - 04 Sep 2019
Cited by 11 | Viewed by 3918
Abstract
Self-healing materials can promote the sustainable reuse of resources. Poly (urea-formaldehyde) (PUF) microcapsules can be incorporated into dielectric materials for self-healing. However, the mechanical properties of PUF microcapsules need to be improved due to insufficient hardness. In this paper, PUF models incorporated with [...] Read more.
Self-healing materials can promote the sustainable reuse of resources. Poly (urea-formaldehyde) (PUF) microcapsules can be incorporated into dielectric materials for self-healing. However, the mechanical properties of PUF microcapsules need to be improved due to insufficient hardness. In this paper, PUF models incorporated with nano-SiO2 of different filler concentrations (0, 2.6, 3.7, 5.3, 6.7, 7.9 wt.%) were designed. The density, the fractional free volume, and the mechanical properties of the PUF-SiO2 models were analyzed at an atomic level based on molecular dynamics simulation. The interfacial interaction model of PUF on the SiO2 surface was also constructed to further investigate the interaction mechanisms. The results showed that the incorporation of nano-SiO2 had a significant effect on the mechanical properties of PUF. Density increased, fractional free volume decreased, and mechanical properties of the PUF materials were gradually enhanced with the increase of nano-SiO2 concentration. This trend was also confirmed by experimental tests. By analyzing the internal mechanism of the PUF–SiO2 interfacial interaction, it was found that hydrogen bonds play a major role in the interaction between PUF and nano-SiO2. Moreover, hydrogen bonds can be formed between the polar atoms of the PUF chain and the hydroxyl groups (–OH) as well as O atoms on the surface of SiO2. Hydrogen bonds interactions are involved in adsorption of PUF chains on the SiO2 surface, reducing the distance between PUF chains and making the system denser, thus enhancing the mechanical properties of PUF materials. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

19 pages, 4264 KiB  
Article
Self-Healing Anti-Atomic-Oxygen Phosphorus-Containing Polyimide Film via Molecular Level Incorporation of Nanocage Trisilanolphenyl POSS: Preparation and Characterization
by Bohan Wu, Yan Zhang, Dayong Yang, Yanbin Yang, Qiang Yu, Li Che and Jingang Liu
Polymers 2019, 11(6), 1013; https://0-doi-org.brum.beds.ac.uk/10.3390/polym11061013 - 07 Jun 2019
Cited by 33 | Viewed by 4411
Abstract
Protection of polymeric materials from the atomic oxygen erosion in low-earth orbit spacecrafts has become one of the most important research topics in aerospace science. In the current research, a series of novel organic/inorganic nanocomposite films with excellent atomic oxygen (AO) resistance are [...] Read more.
Protection of polymeric materials from the atomic oxygen erosion in low-earth orbit spacecrafts has become one of the most important research topics in aerospace science. In the current research, a series of novel organic/inorganic nanocomposite films with excellent atomic oxygen (AO) resistance are prepared from the phosphorous-containing polyimide (FPI) matrix and trisilanolphenyl polyhedral oligomeric silsesquioxane (TSP–POSS) additive. The PI matrix derived from 2,2’-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA) and 2,5-bis[(4-amino- phenoxy)phenyl]diphenylphosphine oxide (BADPO) itself possesses the self-healing feature in AO environment. Incorporation of TSP–POSS further enhances the AO resistance of the FPI/TSP composite films via a Si–P synergic effect. Meanwhile, the thermal stability of the pristine film is maintained. The FPI-25 composite film with a 25 wt % loading of TSP–POSS in the FPI matrix exhibits an AO erosion yield of 3.1 × 10−26 cm3/atom after an AO attack of 4.0 × 1020 atoms/cm2, which is only 5.8% and 1.0% that of pristine FPI-0 film (6FDA-BADPO) and PI-ref (PMDA-ODA) film derived from 1,2,4,5-pyromellitic anhydride (PMDA) and 4,4’-oxydianline (ODA), respectively. Inert phosphorous and silicon-containing passivation layers are observed at the surface of films during AO exposure. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

23 pages, 8840 KiB  
Article
Reversible Self-Healing Carbon-Based Nanocomposites for Structural Applications
by Liberata Guadagno, Luigi Vertuccio, Carlo Naddeo, Elisa Calabrese, Giuseppina Barra, Marialuigia Raimondo, Andrea Sorrentino, Wolfgang H. Binder, Philipp Michael and Sravendra Rana
Polymers 2019, 11(5), 903; https://0-doi-org.brum.beds.ac.uk/10.3390/polym11050903 - 17 May 2019
Cited by 56 | Viewed by 5610
Abstract
Reversible Hydrogen Bonds (RHB) have been explored to confer self-healing function to multifunctional nanocomposites. This study has been carried out through a sequence of different steps. Hydrogen bonding moieties, with the intrinsic ability to simultaneously perform the functions of both hydrogen donors and [...] Read more.
Reversible Hydrogen Bonds (RHB) have been explored to confer self-healing function to multifunctional nanocomposites. This study has been carried out through a sequence of different steps. Hydrogen bonding moieties, with the intrinsic ability to simultaneously perform the functions of both hydrogen donors and acceptors, have been covalently attached to the walls of carbon nanotubes. The epoxy matrix has been modified to adapt the formulation for hosting self-healing mechanisms. It has been toughened with different percentages of rubber phase covalently linked to the epoxy precursor. The most performant matrix, from the mechanical point of view, has been chosen for the incorporation of MWCNTs. Self-healing performance and electrical conductivities have been studied. The comparison of data related to the properties of nanocomposites containing incorporated functionalized and nonfunctionalized MWCNTs has been performed. The values of the electrical conductivity of the self-healing nanocomposites, containing 2.0% by weight of functionalized multiwalled carbon nanotubes (MWCNTs), range between 6.76 × 10−3 S/m and 3.77 × 10−2 S/m, depending on the nature of the functional group. Curing degrees, glass transition temperatures, and storage moduli of the formulated multifunctional nanocomposites prove their potential for application as functional structural materials. Full article
(This article belongs to the Special Issue Polymeric Self-Healing Materials)
Show Figures

Graphical abstract

Back to TopTop