sensors-logo

Journal Browser

Journal Browser

Sensors for Wind Turbine Fault Diagnosis and Prognosis

A special issue of Sensors (ISSN 1424-8220). This special issue belongs to the section "Fault Diagnosis & Sensors".

Deadline for manuscript submissions: closed (20 January 2023) | Viewed by 32546

Special Issue Editor

Department of Mathematics, Escola d’Enginyeria de Barcelona Est (EEBE), Universitat Politècnica de Catalunya (UPC), Campus Diagonal-Besòs (CDB), Eduard Maristany, 16, 08019 Barcelona, Spain
Interests: condition monitoring; data-based models; fault diagnosis; fault tolerant control; machine learning; structural health monitoring; sensors; wind turbines
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

To remain competitive, wind turbines must be reliable machines with efficient and effective maintenance strategies. Thus, it is essential to develop robust and cost-effective prognostic and health management strategies.

On the one hand, wind turbines generate a wealth of SCADA data from a variety of sensors, which can be effectively used to enable fault diagnosis and prognosis strategies. Data-driven techniques, based on machine or deep learning, are particularly promising in this field. Furthermore, this approach is cost-efficient and readily available as no extra equipment needs to be installed in the wind turbine. However, managing this large amount of data is a challenge as SCADA data is low-sampled data (10-min averaged data), gathered under a variety of operational modes and environmental conditions, and always subject to an external unknown excitation, the wind.

On the other hand, accurate prognosis and diagnosis of WT failures could rely on purpose-built condition monitoring (CM) systems. Vibration-based condition monitoring is a well-established strategy but it usually relies on high-sampled data (>10 kHz) leading to a large amount of data from a large number of sensors. Furthermore, for a CM system, the accuracy of data acquired from sensors has a pronounced impact on performance. Finding patterns in such multivariable datasets is a challenge under the aforementioned variety of operational modes and environmental conditions that wind turbines are subject to.

This Special Issue invites contributions that address wind turbine fault prognosis and diagnosis. In particular, submitted papers should clearly show novel contributions and innovative applications covering, but not limited to, any of the following topics around wind turbines:

  • Sensor selection
  • Sensor data processing
  • Prognostic and health management
  • Fault prognosis
  • Fault diagnosis
  • SCADA data
  • Condition monitoring
  • Data-driven models
  • Machine learning
  • Deep learning

Dr. Yolanda Vidal
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Sensors is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Published Papers (10 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

15 pages, 4258 KiB  
Article
Extreme-Low-Speed Heavy Load Bearing Fault Diagnosis by Using Improved RepVGG and Acoustic Emission Signals
by Peng Jiang, Wenyu Sun, Wei Li, Hongyu Wang and Cong Liu
Sensors 2023, 23(7), 3541; https://0-doi-org.brum.beds.ac.uk/10.3390/s23073541 - 28 Mar 2023
Cited by 3 | Viewed by 1501
Abstract
With the worldwide carbon neutralization boom, low-speed heavy load bearings have been widely used in the field of wind power. Bearing failure generates impulses when the rolling element passes the cracked surface of the bearing. Over the past decade, acoustic emission (AE) techniques [...] Read more.
With the worldwide carbon neutralization boom, low-speed heavy load bearings have been widely used in the field of wind power. Bearing failure generates impulses when the rolling element passes the cracked surface of the bearing. Over the past decade, acoustic emission (AE) techniques have been used to detect failure signals. However, the high sampling rates of AE signals make it difficult to design and extract fault features; thus, deep neural network-based approaches have been proposed. In this paper, we proposed an improved RepVGG bearing fault diagnosis technique. The normalized and noise-reduced bearing signals were first converted into Mel frequency cepstrum coefficients (MFCCs) and then inputted into the model. In addition, the exponential moving average method was used to optimize the model and improve its accuracy. Data were extracted from the test bench and wind turbine main shaft bearing. Four damage classes were studied experimentally. The experimental results demonstrated that the improved RepVGG model could be employed for classifying low-speed heavy load bearing states by using MFCCs. Furthermore, the effectiveness of the proposed model was assessed by performing comparisons with existing models. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

14 pages, 6815 KiB  
Article
A Permanent Magnet Ferromagnetic Wear Debris Sensor Based on Axisymmetric High-Gradient Magnetic Field
by Bin Fan, Yong Liu, Peng Zhang, Lianfu Wang, Chao Zhang and Jianguo Wang
Sensors 2022, 22(21), 8282; https://0-doi-org.brum.beds.ac.uk/10.3390/s22218282 - 28 Oct 2022
Cited by 3 | Viewed by 1213
Abstract
The detection of wear debris in lubricating oil is effective for determining current equipment operating conditions for fault diagnosis. In this paper, a permanent magnet ferromagnetic wear debris sensor is proposed that is composed of a compact structure and a detection coil that [...] Read more.
The detection of wear debris in lubricating oil is effective for determining current equipment operating conditions for fault diagnosis. In this paper, a permanent magnet ferromagnetic wear debris sensor is proposed that is composed of a compact structure and a detection coil that generates an induced voltage when wear debris passes through a magnetic field. A three-dimensional model of the sensor is established, the internal axisymmetric high-gradient magnetic field of the sensor is analyzed, and a mathematical model of the sensor signal is proposed. The effects of the air gap structure of the sensor and the relative permeability, velocity, and volume of the wear debris on the sensor performance are analyzed. The correctness of the theoretical results is proven by single particle experiments, and the sensor is calibrated to achieve quantitative analysis of the wear debris. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

21 pages, 8231 KiB  
Article
Compound Fault Diagnosis of a Wind Turbine Gearbox Based on MOMEDA and Parallel Parameter Optimized Resonant Sparse Decomposition
by Yang Feng, Xiangfeng Zhang, Hong Jiang and Jun Li
Sensors 2022, 22(20), 8017; https://0-doi-org.brum.beds.ac.uk/10.3390/s22208017 - 20 Oct 2022
Cited by 2 | Viewed by 1194
Abstract
Wind turbines usually operate in harsh environments. The gearbox, the key component of the transmission chain in wind turbines, can easily be affected by multiple factors during the operation process and develop compound faults. Different types of faults can occur, coupled with each [...] Read more.
Wind turbines usually operate in harsh environments. The gearbox, the key component of the transmission chain in wind turbines, can easily be affected by multiple factors during the operation process and develop compound faults. Different types of faults can occur, coupled with each other and staggered interference. Thus, a challenge is to extract the fault characteristics from the composite fault signal to improve the reliability and the accuracy of compound fault diagnosis. To address the above problems, we propose a compound fault diagnosis method for wind turbine gearboxes based on multipoint optimal minimum entropy deconvolution adjusted (MOMEDA) and parallel parameter optimized resonant sparse decomposition (RSSD). Firstly, the MOMEDA is applied to the preprocess, setting the deconvolution period with different fault frequency types to eliminate the interference of the transmission path and environmental noise, while decoupling and separating the different types of single faults. Then, the RSSD method with parallel parameter optimization is applied for decomposing the preprocessed signal to obtain the low resonance components, further suppressing the interference components and enhancing the periodic fault characteristics. Finally, envelope demodulation of the enhanced signal is applied to extract the fault features and identify the different fault types. The effectiveness of the proposed method was verified using the actual data from the wind turbine gearbox. In addition, a comparison with some existing methods demonstrates the superiority of this method for decoupling composite fault characteristics. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

17 pages, 5367 KiB  
Article
A Probabilistic Bayesian Parallel Deep Learning Framework for Wind Turbine Bearing Fault Diagnosis
by Liang Meng, Yuanhao Su, Xiaojia Kong, Xiaosheng Lan, Yunfeng Li, Tongle Xu and Jinying Ma
Sensors 2022, 22(19), 7644; https://0-doi-org.brum.beds.ac.uk/10.3390/s22197644 - 09 Oct 2022
Cited by 4 | Viewed by 1385
Abstract
The technology of fault diagnosis helps improve the reliability of wind turbines. Difficulties in feature extraction and low confidence in diagnostic results are widespread in the process of deep learning-based fault diagnosis of wind turbine bearings. Therefore, a probabilistic Bayesian parallel deep learning [...] Read more.
The technology of fault diagnosis helps improve the reliability of wind turbines. Difficulties in feature extraction and low confidence in diagnostic results are widespread in the process of deep learning-based fault diagnosis of wind turbine bearings. Therefore, a probabilistic Bayesian parallel deep learning (BayesianPDL) framework is proposed and then achieves fault classification. A parallel deep learning (PDL) framework is proposed to solve the problem of difficult feature extraction of bearing faults. Next, the weights and biases in the PDL framework are converted from deterministic values to probability distributions. In this way, an uncertainty-aware method is explored to achieve reliable machine fault diagnosis. Taking the fault signal of the gearbox output shaft bearing of a wind turbine generator in a wind farm as an example, the diagnostic accuracy of the proposed method can reach 99.14%, and the confidence in diagnostic results is higher than other comparison methods. Experimental results show that the BayesianPDL framework has unique advantages in the fault diagnosis of wind turbine bearings. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

22 pages, 1478 KiB  
Article
Data-Driven Assessment of Wind Turbine Performance Decline with Age and Interpretation Based on Comparative Test Case Analysis
by Davide Astolfi, Ravi Pandit, Ludovica Celesti, Matteo Vedovelli, Andrea Lombardi and Ludovico Terzi
Sensors 2022, 22(9), 3180; https://0-doi-org.brum.beds.ac.uk/10.3390/s22093180 - 21 Apr 2022
Cited by 10 | Viewed by 2618
Abstract
An increasing amount of wind turbines, especially in Europe, are reaching the end of their expected lifetimes; therefore, long data sets describing their operation are available for scholars to analyze the performance trends. On these grounds, the present work is devoted to test [...] Read more.
An increasing amount of wind turbines, especially in Europe, are reaching the end of their expected lifetimes; therefore, long data sets describing their operation are available for scholars to analyze the performance trends. On these grounds, the present work is devoted to test case studies for the evaluation and the interpretation of wind turbine performance decline with age. Two wind farms were studied, featuring widely employed wind turbine models: the former is composed of 6 Senvion MM92 and the latter of 11 Vestas V52 wind turbines, owned by the ENGIE Italia company. SCADA data spanning, respectively, 10 and 7 years were analyzed for the two test cases. The effect of aging on the performance of the test case wind turbines was studied by constructing a data-driven model of appropriate operation curves, selected depending on the working region. For the Senvion MM92, we found that it is questionable to talk about performance aging because there is no evident trend in time: the performance variation year by year is in the order of a few kW and is therefore irrelevant for practical applications. For the Vestas V52 wind turbines, a much wider variability is observed: two wind turbines are affected by a remarkable performance drop, after which the behavior is stable and under-performing with respect to the rest of the wind farm. Particular attention is devoted to the interpretation of the results: the comparative discussion of the two test cases indicates that the observed operation curves are compatible with the hypothesis that the worsening with age of the two under-performing Vestas V52 can be ascribed to the behavior of the hydraulic blade pitch. Furthermore, for both test cases, it is estimated that the gearbox-aging contributes negligibly to the performance decline in time. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

17 pages, 8348 KiB  
Article
Unsupervised Damage Detection for Offshore Jacket Wind Turbine Foundations Based on an Autoencoder Neural Network
by Maria del Cisne Feijóo, Yovana Zambrano, Yolanda Vidal and Christian Tutivén
Sensors 2021, 21(10), 3333; https://0-doi-org.brum.beds.ac.uk/10.3390/s21103333 - 11 May 2021
Cited by 20 | Viewed by 3459
Abstract
Structural health monitoring for offshore wind turbine foundations is paramount to the further development of offshore fixed wind farms. At present time there are a limited number of foundation designs, the jacket type being the preferred one in large water depths. In this [...] Read more.
Structural health monitoring for offshore wind turbine foundations is paramount to the further development of offshore fixed wind farms. At present time there are a limited number of foundation designs, the jacket type being the preferred one in large water depths. In this work, a jacket-type foundation damage diagnosis strategy is stated. Normally, most or all the available data are of regular operation, thus methods that focus on the data leading to failures end up using only a small subset of the available data. Furthermore, when there is no historical precedent of a type of fault, those methods cannot be used. In addition, offshore wind turbines work under a wide variety of environmental conditions and regions of operation involving unknown input excitation given by the wind and waves. Taking into account the aforementioned difficulties, the stated strategy in this work is based on an autoencoder neural network model and its contribution is two-fold: (i) the proposed strategy is based only on healthy data, and (ii) it works under different operating and environmental conditions based only on the output vibration data gathered by accelerometer sensors. The proposed strategy has been tested through experimental laboratory tests on a scaled model. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

22 pages, 6062 KiB  
Article
Wind Turbine Main Bearing Fault Prognosis Based Solely on SCADA Data
by Ángel Encalada-Dávila, Bryan Puruncajas, Christian Tutivén and Yolanda Vidal
Sensors 2021, 21(6), 2228; https://0-doi-org.brum.beds.ac.uk/10.3390/s21062228 - 23 Mar 2021
Cited by 46 | Viewed by 8471
Abstract
As stated by the European Academy of Wind Energy (EAWE), the wind industry has identified main bearing failures as a critical issue in terms of increasing wind turbine reliability and availability. This is owing to major repairs with high replacement costs and long [...] Read more.
As stated by the European Academy of Wind Energy (EAWE), the wind industry has identified main bearing failures as a critical issue in terms of increasing wind turbine reliability and availability. This is owing to major repairs with high replacement costs and long downtime periods associated with main bearing failures. Thus, the main bearing fault prognosis has become an economically relevant topic and is a technical challenge. In this work, a data-based methodology for fault prognosis is presented. The main contributions of this work are as follows: (i) Prognosis is achieved by using only supervisory control and data acquisition (SCADA) data, which is already available in all industrial-sized wind turbines; thus, no extra sensors that are designed for a specific purpose need to be installed. (ii) The proposed method only requires healthy data to be collected; thus, it can be applied to any wind farm even when no faulty data has been recorded. (iii) The proposed algorithm works under different and varying operating and environmental conditions. (iv) The validity and performance of the established methodology is demonstrated on a real underproduction wind farm consisting of 12 wind turbines. The obtained results show that advanced prognostic systems based solely on SCADA data can predict failures several months prior to their occurrence and allow wind turbine operators to plan their operations. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

20 pages, 2638 KiB  
Article
An Ensemble Learning Solution for Predictive Maintenance of Wind Turbines Main Bearing
by Mattia Beretta, Anatole Julian, Jose Sepulveda, Jordi Cusidó and Olga Porro
Sensors 2021, 21(4), 1512; https://0-doi-org.brum.beds.ac.uk/10.3390/s21041512 - 22 Feb 2021
Cited by 23 | Viewed by 4168
Abstract
A novel and innovative solution addressing wind turbines’ main bearing failure predictions using SCADA data is presented. This methodology enables to cut setup times and has more flexible requirements when compared to the current predictive algorithms. The proposed solution is entirely unsupervised as [...] Read more.
A novel and innovative solution addressing wind turbines’ main bearing failure predictions using SCADA data is presented. This methodology enables to cut setup times and has more flexible requirements when compared to the current predictive algorithms. The proposed solution is entirely unsupervised as it does not require the labeling of data through work orders logs. Results of interpretable algorithms, which are tailored to capture specific aspects of main bearing failures, are merged into a combined health status indicator making use of Ensemble Learning principles. Based on multiple specialized indicators, the interpretability of the results is greater compared to black-box solutions that try to address the problem with a single complex algorithm. The proposed methodology has been tested on a dataset covering more than two year of operations from two onshore wind farms, counting a total of 84 turbines. All four main bearing failures are anticipated at least one month of time in advance. Combining individual indicators into a composed one proved effective with regard to all the tracked metrics. Accuracy of 95.1%, precision of 24.5% and F1 score of 38.5% are obtained averaging the values across the two windfarms. The encouraging results, the unsupervised nature and the flexibility and scalability of the proposed solution are appealing, making it particularly attractive for any online monitoring system used on single wind farms as well as entire wind turbine fleets. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

33 pages, 9872 KiB  
Article
Entropy Indicators: An Approach for Low-Speed Bearing Diagnosis
by Diego Sandoval, Urko Leturiondo, Yolanda Vidal and Francesc Pozo
Sensors 2021, 21(3), 849; https://0-doi-org.brum.beds.ac.uk/10.3390/s21030849 - 27 Jan 2021
Cited by 16 | Viewed by 3105
Abstract
To increase the competitiveness of wind energy, the maintenance costs of offshore floating and fixed wind turbines need to be reduced. One strategy is the enhancement of the condition monitoring techniques for pitch bearings, because their low operational speed and the high loads [...] Read more.
To increase the competitiveness of wind energy, the maintenance costs of offshore floating and fixed wind turbines need to be reduced. One strategy is the enhancement of the condition monitoring techniques for pitch bearings, because their low operational speed and the high loads applied to them make their monitoring challenging. Vibration analysis has been widely used for monitoring the bearing condition with good results obtained for regular bearings, but with difficulties when the operational speed decreases. Therefore, new techniques are required to enhance the capabilities of vibration analysis for bearings under such operational conditions. This study proposes the use of indicators based on entropy for monitoring a low-speed bearing condition. The indicators used are approximate, dispersion, singular value decomposition, and spectral entropy of the permutation entropy. This approach has been tested with vibration signals acquired in a test rig with bearings under different health conditions. The results show that entropy indicators (EIs) can discriminate with higher-accuracy damaged bearings for low-speed bearings compared with the regular indicators. Furthermore, it is shown that the combination of regular and entropy-based indicators can also contribute to a more reliable diagnosis. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

17 pages, 37699 KiB  
Article
Development of a Linear Acoustic Array for Aero-Acoustic Quantification of Camber-Bladed Vertical Axis Wind Turbine
by Abdul Hadi Butt, Bilal Akbar, Jawad Aslam, Naveed Akram, Manzoore Elahi M Soudagar, Fausto Pedro García Márquez, Md. Yamin Younis and Emad Uddin
Sensors 2020, 20(20), 5954; https://0-doi-org.brum.beds.ac.uk/10.3390/s20205954 - 21 Oct 2020
Cited by 10 | Viewed by 3156
Abstract
Vertical axis wind turbines (VAWT) are a source of renewable energy and are used for both industrial and domestic purposes. The study of noise characteristics of a VAWT is an important performance parameter for the turbine. This study focuses on the development of [...] Read more.
Vertical axis wind turbines (VAWT) are a source of renewable energy and are used for both industrial and domestic purposes. The study of noise characteristics of a VAWT is an important performance parameter for the turbine. This study focuses on the development of a linear microphone array and measuring acoustic signals on a cambered five-bladed 45 W VAWT in an anechoic chamber at different tip speed ratios. The sound pressure level spectrum of VAWT shows that tonal noises such as blade passing frequencies dominate at lower frequencies whereas broadband noise corresponds to all audible ranges of frequencies. This study shows that the major portion of noise from the source is dominated by aerodynamic noises generated due to vortex generation and trailing edge serrations. The research also predicts that dynamic stall is evident in the lower Tip speed ratio (TSR) region making smaller TSR values unsuitable for a quiet VAWT. This paper compares the results of linear aeroacoustic array with a 128-MEMS acoustic camera with higher resolution. The study depicts a 3 dB margin between two systems at lower TSR values. The research approves the usage of the 8 mic linear array for small radius rotary machinery considering the results comparison with a NORSONIC camera and its resolution. These observations serve as a basis for noise reduction and blade optimization techniques. Full article
(This article belongs to the Special Issue Sensors for Wind Turbine Fault Diagnosis and Prognosis)
Show Figures

Figure 1

Back to TopTop