Progressive Collapse of Buildings

A special issue of Vibration (ISSN 2571-631X).

Deadline for manuscript submissions: closed (31 March 2022) | Viewed by 23476

Special Issue Editors

School of Computing, Engineering and Digital Technologies, Teesside University, Middlesbrough, Tees Valley TS1 3BX, UK
Interests: steel structures; nonlinear finite element analysis; structural robustness; seismic design and assessment of structures; resilient structural systems; earthquake engineering and structural dynamics; structural stability
Special Issues, Collections and Topics in MDPI journals
Institute of Steel Structures, School of Civil Engineering, Zografou Campus, National Technical University of Athens, GR-15780 Athens, Greece
Interests: nonlinear behavior of steel structures; metal structures
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

The structural robustness of buildings against accidental loads is an area of great interest to engineers, as many events in the past have revealed their catastrophic consequences (e.g., Ronan Point building (1968), Murrah Federal Building (1995), World Trade Center (2001) etc.). The availability of robust numerical simulation tools has led to significant progress in this area, especially when it comes to the analysis of 3D buildings or large subsystems. In addition to these, a large number of experimental studies has been produced in recent years which aided the validation of numerical models and promoted a deeper understanding in this field. Despite the progress, there are still many challenges that need to be addressed.

This Special Issue invites the submission of articles on the progressive collapse of buildings that are related (but not limited) to the following topics:

  • Design codes and guidelines.
  • Steel, concrete, and composite structures.
  • Bolted connections.
  • Welded connections.
  • Fire-induced collapse.
  • Blast/collision-induced collapse.
  • Innovative seismically resilient buildings.
  • Tall buildings.
  • Cold-formed-steel buildings.
  • Advancements in numerical methods.
  • Experimental studies.
  • Retrofitting of existing buildings against progressive collapse.

Dr. Christoforos Dimopoulos
Prof. Dr. Charis J. Gantes
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Vibration is an international peer-reviewed open access quarterly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 1600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • structural robustness
  • progressive collapse
  • steel buildings
  • fire/blast/collision-induced collapse
  • connections
  • design codes
  • retrofitting

Published Papers (7 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research, Review

2 pages, 196 KiB  
Editorial
Progressive Collapse of Buildings
by Christoforos Dimopoulos and Charis J. Gantes
Vibration 2022, 5(3), 568-569; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration5030032 - 01 Sep 2022
Viewed by 1176
Abstract
The progressive collapse of buildings is an important ongoing research topic in civil engineering [...] Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)

Research

Jump to: Editorial, Review

16 pages, 3895 KiB  
Article
Definition and Validation of Fast Design Procedures for Seismic Isolation Systems
by Marco Furinghetti
Vibration 2022, 5(2), 290-305; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration5020017 - 03 May 2022
Cited by 19 | Viewed by 2599
Abstract
The research on traditional and innovative seismic isolation techniques has grown significantly in recent years, thanks to both experimental and numerical campaigns. As a consequence, practitioners have also started to apply such techniques in real applications, and nowadays, seismic isolation is widespread in [...] Read more.
The research on traditional and innovative seismic isolation techniques has grown significantly in recent years, thanks to both experimental and numerical campaigns. As a consequence, practitioners have also started to apply such techniques in real applications, and nowadays, seismic isolation is widespread in regions characterized by a high level of seismic hazard. The present work aims at providing practitioners with very simple procedures for the first design of the isolation devices of a building, according to the most common typologies of isolators: Rubber Bearings, Lead Rubber Bearings and Curved Surface Sliders. Such Fast Design Procedures are based on simplified approaches, and the mechanical properties of the implemented devices can be obtained by assuming a performance point of the overall structural system, namely effective period and equivalent viscous damping. Furthermore, some important parameters are defined, according to the outcomes of a statistical analysis of the test database of the EUCENTRE Foundation in Italy. Finally, results of a validation study have been provided by analyzing a case-study structure through a Multi Degree of Freedom oscillator and a full 3D Finite Element model. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

28 pages, 17238 KiB  
Article
Full-Scale Blast Tests on a Conventionally Designed Three-Story Steel Braced Frame with Composite Floor Slabs
by Michalis Hadjioannou, Aldo E. McKay and Phillip C. Benshoof
Vibration 2021, 4(4), 865-892; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration4040049 - 24 Nov 2021
Cited by 2 | Viewed by 2652
Abstract
This paper summarizes the findings of two full-scale blasts tests on a steel braced frame structure with composite floor slabs, which are representative of a typical office building. The aim of this research study was to experimentally characterize the behavior of conventionally designed [...] Read more.
This paper summarizes the findings of two full-scale blasts tests on a steel braced frame structure with composite floor slabs, which are representative of a typical office building. The aim of this research study was to experimentally characterize the behavior of conventionally designed steel braced frames to blast loads when enclosed with conventional and blast-resistant façade. The two tests involved a three-story, steel braced frame with concentrical steel braces, which are designed to resist typical gravity and wind loads without design provisions for blast or earthquake loads. During the first blast test, the structure was enclosed with a typical, non-blast-resistant, curtainwall façade, and the steel frame sustained minimal damage. For the second blast test, the structure was enclosed with a blast-resistant façade, which resulted in higher damage levels with some brace connections rupturing, but the building did not collapse. Observations from the test program indicate the appreciable reserved capacity of steel brace frame structures to resist blast loads. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

17 pages, 6121 KiB  
Article
Post-Breakage Vibration Frequency Analysis of In-Service Pedestrian Laminated Glass Modular Units
by Chiara Bedon and Salvatore Noè
Vibration 2021, 4(4), 836-852; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration4040047 - 06 Nov 2021
Cited by 17 | Viewed by 2668
Abstract
The vibration performance of pedestrian structures has attracted the attention of several studies, especially with respect to unfavourable operational conditions or possible damage scenarios. Specific vibration comfort levels must be commonly satisfied in addition to basic safety requirements, depending on the class of [...] Read more.
The vibration performance of pedestrian structures has attracted the attention of several studies, especially with respect to unfavourable operational conditions or possible damage scenarios. Specific vibration comfort levels must be commonly satisfied in addition to basic safety requirements, depending on the class of use, the structural typology and the materials involved. Careful consideration could be thus needed at the design stage (in terms of serviceability and ultimate limit state requirements), but also during the service life of a given pedestrian system. As for structural health monitoring purposes, early damage detection and maintenance interventions on constructed facilities, vibration frequency estimates are also known to represent a preliminary but rather important diagnostic parameter. In this paper, the attention is focused on the post-breakage vibration analysis of in-service triple laminated glass (LG) modular units that are part of a case-study indoor walkway in Italy. On-site non-destructive experimental methods and dynamic identification techniques are used for the vibration performance assessment of a partially cracked LG panel (LGF), compared to an uncracked modular unit (LGU). Equivalent material properties are derived to account for the fractured glass layer, and compared with literature data for post-breakage calculations. The derivation of experimental dynamic parameters for the post-breakage mechanical characterization of the structural system is supported by finite element (FE) numerical models and parametric frequency analyses. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

19 pages, 8574 KiB  
Article
Membrane Action of Cladding Subjected to Blast Loading and Effects on the Supporting Structure
by Orestis Ioannou and Charis J. Gantes
Vibration 2021, 4(4), 768-786; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration4040043 - 06 Oct 2021
Cited by 4 | Viewed by 2342
Abstract
A recent blast design trend is to properly select cladding characteristics in order to limit blast consequences on its supporting structure. In this context, it is worth noting that cladding components may exhibit significant membrane action, and its effects may be decisive for [...] Read more.
A recent blast design trend is to properly select cladding characteristics in order to limit blast consequences on its supporting structure. In this context, it is worth noting that cladding components may exhibit significant membrane action, and its effects may be decisive for the supporting structure. The main focus of the present study was to examine these effects through two-step dimensionless SDOF analyses, aimed at reaching conclusions that would be applicable to a large variety of cladding/supporting structure arrangements. The results of these analyses are presented by employing the dynamic load factor, representing the maximum supporting structure displacement. It was found that cladding membrane action has adverse effects over its supporting structure, as it does not allow for extensive plastic dissipation and leads to higher support reactions. On the contrary, insignificant membrane action leads to lower dynamic load factor for the supporting structure. Thus, membrane behavior should be activated only as a safety backup action in order to prevent cladding failure. A case study of a typical cladding/supporting structure is presented to demonstrate and verify the proposed two-step SDOF analyses and the obtained results. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

21 pages, 7865 KiB  
Article
Robustness of Reinforced Concrete Frames against Blast-Induced Progressive Collapse
by Mattia Francioli, Francesco Petrini, Pierluigi Olmati and Franco Bontempi
Vibration 2021, 4(3), 722-742; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration4030040 - 18 Sep 2021
Cited by 4 | Viewed by 2837
Abstract
A quantitative procedure for the robustness and progressive collapse assessment of reinforced concrete (RC) frames under blast load scenarios is presented. This procedure is supported by multilevel numerical models, including nonlinear numerical analyses of the structural response of both local (i.e., response of [...] Read more.
A quantitative procedure for the robustness and progressive collapse assessment of reinforced concrete (RC) frames under blast load scenarios is presented. This procedure is supported by multilevel numerical models, including nonlinear numerical analyses of the structural response of both local (i.e., response of the single structural element to the blast load) and global levels (i.e., response of the structural system to the blast-induced damage). Furthermore, the procedure is applied to a 2D RC frame structure. The novelty of the proposed procedure is that the global robustness is evaluated by the so-called “damage-presumption approach” where the considered damages are defined both in typology and extension depending on the blast scenario occurring at the local level. The dedicated local response analysis of a specified blast scenario leads to the proper definition of the so-called “blast-scenario dependent robustness curves”. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

Review

Jump to: Editorial, Research

46 pages, 13337 KiB  
Review
Earthquake-Resilient Design of Seismically Isolated Buildings: A Review of Technology
by Cem Yenidogan
Vibration 2021, 4(3), 602-647; https://0-doi-org.brum.beds.ac.uk/10.3390/vibration4030035 - 22 Jul 2021
Cited by 9 | Viewed by 7491
Abstract
Earthquake Seismic isolation plays an important role in achieving sustainable earthquake resilience communities. Seismic isolation method is a justified, mature, and reliable performance enhancement strategy for a wide range of structural systems and valuable contents. As a result of the targeted response modification, [...] Read more.
Earthquake Seismic isolation plays an important role in achieving sustainable earthquake resilience communities. Seismic isolation method is a justified, mature, and reliable performance enhancement strategy for a wide range of structural systems and valuable contents. As a result of the targeted response modification, high-performance expectations and earthquake resilience can be achieved during the service life of the structures that are compliant with the design code requirements. Design and analysis procedures of isolation systems in standards were evolved substantially to expand the use of isolation technology and quantify the benefits of isolation systems to overcome the existing impediments. Strictly speaking, new tools are offered to the engineering community to highlight the possible issues that may appear in isolation units beyond the design basis earthquake level to improve the accuracy of response prediction. This paper aims to overview the characteristics of frequently used isolation systems in the industry with mathematical models, design criteria toward sustainable communities, the current state of practice along with the set forth design requirements of selectively well-known standards with special emphasis to the ELF procedure from the perspective of performance-based design philosophy. Additionally, two large-scale seismic isolation applications in the world are given as benchmark studies for the new construction and upgrading scheme in the content of the study. Full article
(This article belongs to the Special Issue Progressive Collapse of Buildings)
Show Figures

Figure 1

Back to TopTop