Efficient Total Synthesis of Lissodendrin B, 2-Aminoimidazole Marine Alkaloids Isolated from Lissodendoryx (Acanthodoryx) fibrosa

Abstract

Lissodendrin B is a 2-aminoimidazole alkaloid bearing a (p-hydroxyphenyl) glyoxal moiety that was isolated from the Indonesian sponge Lissodendoryx (Acanthodoryx) fibrosa. We reported the first efficient total synthesis of Lissodendrin B. The precursor 4,5-disubstituted imidazole was obtained through Suzuki coupling and Sonogashira coupling reactions from 4-iodoimidazole. C2-azidation and reduction of the azide then provided the core structures of Lissodendrin B. Subsequent triple-bond oxidation, demethylation, and deacetylation gave the final product. The synthesis approach consists of ten steps with an overall yield of 1.1% under mild reaction conditions, and it can be applied for future analog synthesis and biological studies.

1. Introduction

Marine alkaloids offer significant advantages for the discovery of leading compounds because of their unique, complex structures and diverse bioactivities [1]. Unfortunately, most marine alkaloids are isolated in very small quantities, which limits further studies to generate combinatorial libraries for drug discovery and compound leads optimization. Therefore, efficient chemical synthesis of marine alkaloids in greater quantities is necessary for their usage in bioactivity studies. 2-aminoimidazole alkaloids, the most commonly investigated representative marine alkaloid, are found primarily in calcareous sponges, especially in the genera Leucetta and Clathrina [2,3,4,5]. These compounds have been extensively studied because of their various biological activities, including anticancer [3,4,5], antimicrobial [2,6], antivirus properties [7,8], P-gp-mediated MDR reversal activity [9] as well as leukotriene B4 receptor [10] and epidermal growth factor (EGF) receptor antagonist activities [11]. Therefore, efficient synthesis of 2-aminoimidazole compound is subject to increasing demand. There are two major approaches for preparation of 2-aminoimidazole compound: (1) the condensation of α-haloketone with an acetylated guanidine [12] or condensation of an α-aminoketone with cyanamide [13] and (2) functionalization of imidazole scaffold via protection, C2-amination, and deprotection [14,15].

The secondary metabolites, Lissodendrin A and Lissodendrin B (Figure 1) were isolated from the ethyl acetate fraction of the sponge Lissodendoryx (Acanthodoryx) fibrosa in 2016 and structural elucidation of these compounds was achieved using spectroscopic techniques. Lissodendrin A and Lissodendrin B possess unprecedented 2-aminoimidazole skeletons with the latter compound bearing a (p-hydroxyphenyl) glyoxal moiety, which is rarely encountered in natural products. The new natural alkaloid 11 is devoid of cytotoxicity to the L5178Y mouse lymphoma cell line at a dose of 10 μg/mL [16]. The precedent of diverse biological activity of 2-aminoimidazole alkaloids, coupled with the lack of synthetic methods available to date, argues well for its synthesis to support further biological evaluation. Herein, we reported the first successful and efficient total synthesis of Lissodendrin B involving Suzuki coupling and Sonogashira coupling reactions and we constructed the precursor 4,5-disubstituted imidazole. C2-azidation and reduction of the azide then provided the core structures of Lissodendrin B, and subsequent triple-bond oxidation, demethylation, and deacetylation led to the completion of the synthesis. All the compounds thus synthesized were fully characterized by ¹H, ¹³C, and HRMS.

2. Results and Discussion

2.1. Retrosynthetic Analysis of Lissodendrin B

Scheme 1 illustrates the retrosynthetic pathway of Lissodendrin B. From the retrosynthetic analysis, we envisioned that the natural product could be produced by deacetylation [17] from acetamide 10, which was obtained from triple-bond oxidation [18,19] and demethylation [20] of the key intermediate 8. We initially anticipated that compound 8 could be produced through Sonogashira coupling reaction [21] from compound 12, whose core moiety, 2-aminoimidazole skeletons, could be prepared by the condensation of α-haloketone 13 with an acetylated guanidine (Route 1) [12]. However, when we applied this strategy to our compound synthesis, the formation of compound 8 proceeded unsuccessfully via Sonogashira coupling reaction. We speculated that the electron-donating effect of acetamino group generated increasing electron clouds at the imidazole ring, leading to the reaction not occurring. Then, we attempted another approach (Route 2), in which the 2-amineimidazolone skeleton of intermediate 8 was constructed from the C2-azidation [14,15] and reduction [22] from intermediate 5, which could be prepared by Sonogashira coupling reaction and Suzuki coupling reaction [23] from easily accessible starting material 1.

2.2. Synthesis of Lissodendrin B

Scheme 2 shows a successful synthetic approach developed for production of Lissodendrin B. The synthesis commenced with the preparation of 4-(4-methoxyphenyl)-1H-imidazole 2, using Pd(PPh₃)₄ as the catalyst and CsF as the base. The 4-iodoimidazole was treated with 4-methoxyphenyl boronic acid via Suzuki−Miyaura cross-coupling reaction in combined solution of toluene and water (V/V = 5/1) afforded the desired cross-coupling product 2 at a yield of 82% [23]. To introduce the 4-methoxyphenylacetylene by Sonogashira coupling reaction, iodization of arylimidazole 2 with NIS provided iodoimidazole 3 as a white solid at a yield of 79% [24]. The optimal conditions entailed the slow addition of 1.2 equiv. of NIS to avoid the formation of diiodide side-product. Sonogashira reactions of compound 3 with 4-methoxyphenylacetylene proceeded smoothly in the presence of Pd(PPh₃)₄ and CuI as catalysts and triethylamine as the base, affording coupling products 4 at a yield of 70% as a light-yellow liquid [21]. Using triethylamine as a catalyst, protection of the imidazole nitrogen with triphenylmethyl chloride at 45 °C in CH₂Cl₂ gave the known N-trityl imidazole 5 at 77% yield as a white solid [25]. Deprotonation of the imidazole 5 at C2 positions with n-BuLi in THF at −78 °C and trapping with TsN₃ provided the azide 6 at 46% yield as a white solid [14,15]. Subsequent treatment with Na₂S⸱9H₂O in methanol at room temperature led to the reduction of the azide to amine 7 at good yield as a brown-yellow solid [22]. Acetylation of amine 7 with acetic anhydride in CH₂Cl₂ in the presence of triethylamine at reflux gave the corresponding acetamide, which was treated with concentrated hydrochloric acid causing removal of the trityl group, resulting in the expected compound 8 forming at a yield of 62% (in two steps).

With amide 8 in hand, oxidation of the triple-bond was performed to construct the corresponding α-diketone structure. At the outset, KMnO₄ and NaHCO₃ were used to convert compound 8 to α-diketone 9 [18]. The desired compound 9 was formed, but the yield thereof was poor (17%). Numerous attempts to optimize the reaction conditions through varying KMnO₄ and NaHCO₃ equivalents, solvent or order of addition were unsuccessful (

Table 1. Optimization of oxidation of the triple-bond.

Catalyst (equiv.)	Base	Solvent	Temperature	Time (h)	Yield (%)
KMnO4 (2 equiv.)	NaHCO3 (1 equiv.)	Acetone	0 °C -r.t.	4	17
KMnO4 (2 equiv.)	NaHCO3 (1 equiv.)	THF	0 °C -r.t.	8	10
KMnO4 (4 equiv.)	NaHCO3 (2 equiv.)	Acetone	0 °C -r.t.	8	20
Hg(NO3)2 (2 equiv.)	—	DMF	0 °C -r.t.	2	51

). Subsequently, mercuric nitrate hydrate was used for this transformation [19]. It was encouraging that the triple-bond of amide 9 was successfully converted into α-diketone 9 at a yield of 51% as a yellow solid using mercuric nitrate hydrate (2 equiv.) in DMF at room temperature.

At this juncture, with core structure 9 in hand, we further performed functional modification, including demethylation and deacetylation: to our surprise, demethylation of α-diketone 9 was accomplished using BBr₃ (5 equiv.) in CH₂Cl₂ at ambient temperature giving the corresponding diphenol 10 at a yield of 66% as a yellow solid [20]. Finally, the acetyl moiety of diphenol 10 was removed by using concentrated sulfuric acid in combined solution of methanol and water (V/V = 2/1) at 80 °C to give Lissodendrin B at a yield of 51% as a yellow solid [17]. It is noteworthy that the α-diketone moiety of Lissodendrin B is stable below 80 °C.

Thus, we completed the first total synthesis of Lissodendrin B in ten steps with an overall yield of 1.1%. Spectra of the synthesized Lissodendrin B were in excellent agreement with that of the natural product [16].

3. Materials and Methods

3.1. General Information

Dichloromethane and tetrahydrofuran were dried by distillation. All reagents used in the experiments were obtained from commercial sources without further purification. Reactions were monitored by thin layer chromatography (TLC). Visualization was achieved under a UV lamp (254 nm and 365 nm), and developed the plates with potassium permanganate. Flash column chromatography was performed on a silica gel (200–300 mesh). ¹H NMR and ¹³C NMR spectra were taken on Jnm-Ecp-600 spectrometer, respectively, ¹H NMR and ¹³C NMR spectra were referenced to tetramethylsilane (Me₄Si). High resolution (ESI) MS spectra were recorded using a QTOF-2 Micromass spectrometer (Supplementary Materials).

3.2. Methods

3.2.1. Synthesis of 4-(4-Methoxyphenyl)-1H-imidazole (2)

To a solution of 4-iodoimidazole 1 (15 g, 77.3 mmol ) in toluene (300 mL) and H₂O (100 mL) was sequentially added 4-methoxyphenylboronic acid (23.5 g, 155 mmol), Pd(PPh₃)₄ (8.9 g, 7.7 mmol), CsF (23.5 g, 155 mmol) and N₂ was bubbled it for 3–5 min. The heterogeneous mixture was stirred at 100 °C for 24 h under N₂ atmosphere. The reaction mixture was cooled to room temperature and water was added, layers were separated. The aqueous layer was extracted with ethyl acetate (2 × 200 mL). The combined organic extracts were washed with brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by flash chromatography (CH₂Cl₂/CH₃OH, 30:1) to give product 2 (11 g, 82%) as a white solid. ¹H NMR (500 MHz, DMSO-d₆) δ 12.13 (s, 1H), 7.66 (d, J = 8.9 Hz, 3H), 7.41 (s, 1H), 6.92 (d, J = 8.7 Hz, 2H), 3.75 (s, 3H). ¹³C NMR (101 MHz, DMSO-d₆) δ 159.13, 138.80, 128.71, 114.41, 55.66. HRMS calcd for C₁₀H₁₁ON₂ [M + H]⁺ 175.0866, found 175.0864. Spectroscopic data agrees with those previously reported [23].

3.2.2. Synthesis of 5-Iodo-4-(4-methoxyphenyl)-1H-imidazole (3)

To a stirring solution of Compound 2 (11 g, 63.1 mmol) in anhydrous CH₂Cl₂ (300 mL) was added NIS (17.0 g, 75.7 mmol) in several portions. After stirring for 4 h at room temperature. The solvent was removed under vacuum, the residue was poured into saturated NaHCO₃ solution and extracted with ethyl acetate (2 × 300 mL). The combined organic layers were washed with water brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (CH₂Cl₂/CH₃OH, 50:1) to give compound 3 (15 g, 79%) as a white solid. ¹H NMR (500 MHz, DMSO-d₆) δ 12.65 (s, 1H), 7.62 (m, 3H), 7.03 (d, J = 8.2 Hz, 2H), 3.79 (s, 3H). ¹³C NMR (101 MHz, DMSO-d₆) δ 158.30, 136.32, 136.06, 125.98, 114.43, 113.40, 55.52. HRMS calcd for C₁₀H₁₀ON₂I [M+ H]⁺ 300.9832, found 300.9826.

3.2.3. Synthesis of 5-(4-Methoxyphenyl)-4-((4-methoxyphenyl)ethynyl)-1H-imidazole (4)

To a solution of Compound 3 (15 g, 50 mmol) in DMF (200 mL) was added 4-methoxyphenylacetylene (9.9 g, 75 mmol), Pd(PPh₃)₄ (5.8 g, 5 mmol), CuI (950 mg, 5 mmol), triethylamine (208 mL, 150 mmol) and N₂ was bubbled it for 3–5 min. The reaction mixture was stirred at 100 °C for 8 h under N₂ atmosphere. The reaction mixture was cooled to room temperature and the solvent was removed under vacuum. The residue was poured into water and extracted with ethyl acetate (2 × 300 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (CH₂Cl₂/CH₃OH, 50:1) to give compound 4 (10.6 g, 70%) as a yellow oil. ¹H NMR (400 MHz, Chloroform-d) δ 8.04 (d, J = 8.8 Hz, 2H), 7.66 (s, 1H), 7.44 (d, J = 8.8 Hz, 2H), 6.97 (d, J = 8.9 Hz, 2H), 6.87 (d, J = 8.8 Hz, 2H), 3.84 (s, 3H). 3.83 (s, 3H). ¹³C NMR (101 MHz, Chloroform-d) δ 159.77, 159.17, 135.03, 132.84, 127.34, 124.81, 115.08, 114.13, 114.08, 94.17, 80.25, 55.35, 55.32. HRMS calcd for C₁₉H₁₇O₂N₂ [M + H]⁺ 305.1285, found 305.1276.

3.2.4. Synthesis of 5-(4-Methoxyphenyl)-4-((4-methoxyphenyl)ethynyl)-1-trityl-1H-imidazole (5)

To a stirring solution of Compound 4 (10 g, 32.9 mmol) in anhydrous CH₂Cl₂ (200 mL) was added triphenylmethyl chloride (13.8 g, 49.4 mmol) and trimethylamine (22.8 mL, 164.5 mmol). After stirring for 4 h at reflux, the solvent was removed under vacuum, the residue was poured into saturated NaHCO₃ solution and extracted with ethyl acetate (2 × 200 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate, 4:1) to give compound 5 (13.8 g, 77%) as a white solid. ¹H NMR (400 MHz, Chloroform-d) δ 8.15 (d, J = 8.9 Hz, 2H), 7.48 (d, J = 0.9 Hz, 1H), 7.34–7.28 (m, 15H), 6.95 (d, J = 8.9 Hz, 2H), 6.78 (d, J = 8.8 Hz, 2H), 6.72 (d, J = 8.9 Hz, 2H), 3.85 (s, 3H), 3.78 (s, 3H). ¹³C NMR (101 MHz, Chloroform-d) δ 159.39, 159.07, 145.40, 141.73, 139.11, 132.23, 130.24, 128.16, 127.94, 127.81, 127.73, 127.55, 126.85, 115.22, 113.70, 112.98, 100.30, 80.45, 76.07, 55.33, 55.25. HRMS calcd for C₃₈H₃₁O₂N₂ [M + H]⁺ 547.2380, found 547.2378.

3.2.5. Synthesis of 2-Azido-5-(4-methoxyphenyl)-4-((4-methoxyphenyl)ethynyl)-1-trityl-1H-imidazole (6)

Compound 5 (3.0 g, 5.5 mmol) in anhydrous THF (200 mL) was cooled to −78 °C and n-BuLi (11 mL, 27.5 mmol, 2.5 M in solution in THF) was added dropwise. After complete addition of the n-BuLi, the reaction was stirred for 2 h at −78 °C, then TsN₃ (4.4 g, 22.0 mmol) dissolved in anhydrous THF (15 mL) was added. The reaction mixture was allowed to room temperature and stirred for 4 h. The reaction was quenched carefully with saturated aqueous NH₄Cl and extracted with ethyl acetate (2 × 200 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate, 15:1) to give compound 6 (1.5 g, 46%) as a white solid. ¹H NMR (400 MHz, Chloroform-d) δ 8.10 (d, J = 8.8 Hz, 2H), 7.54–7.47 (m, 6H), 7.33–7.28 (m, 6H), 7.27–7.22 (m, 3H), 6.93 (d, J = 9.0 Hz, 2H), 6.83 (d, J = 9.0 Hz, 2H), 6.76 (d, J = 8.9 Hz, 2H), 3.85 (s, 3H), 3.81 (s, 3H).¹³C NMR (101 MHz, Chloroform-d) δ 159.33, 159.17, 145.33, 143.69, 142.28, 142.03, 134.67, 133.00, 132.40, 129.87, 129.74, 127.97, 127.87, 127.63, 127.22, 126.98, 126.25, 115.35, 113.73, 113.60, 111.11, 101.86, 81.30, 76.52, 55.32, 55.28. HRMS calcd for C₃₈H₃₀O₂N₅ [M + H]⁺ 588.2325, found 588.2328.

3.2.6. Synthesis of 5-(4-Methoxyphenyl)-4-((4-methoxyphenyl)ethynyl)-1-trityl-1H-imidazol-2-amine (7)

To a stirring solution of Compound 6 (1.5 g, 2.6 mmol) in CH₃OH (100 mL) was added Na₂S⸱9H₂O (5.3 g, 26 mmol). After stirring for 4 h at room temperature, the solvent was removed under vacuum. The residue was poured into water and extracted with ethyl acetate (2 × 100 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated to give compound 7 (1 g, 69%) as a yellow solid. (Compound 7 was used in the next step without further purification.) ¹H NMR (500 MHz, Chloroform-d) δ 8.00 (d, J = 8.5 Hz, 2H), 7.52 (m, 6H), 7.31 (m, 6H), 7.27 (dd, J = 7.4, 1.2 Hz, 3H), 6.87 (d, J = 8.5 Hz, 2H), 6.72 (m, 4H), 4.04 (s, 2H), 3.80 (s, 3H), 3.77 (s, 3H). ¹³C NMR (101 MHz, Chloroform-d) δ 158.98, 158.91, 149.86, 142.62, 142.43, 132.08, 130.34, 128.04, 127.81, 127.66, 126.97, 116.26, 113.76, 113.60, 108.06, 100.37, 83.02, 75.82, 55.41, 55.37. HRMS calcd for C₃₈H₃₂O₂N₃ [M + H]⁺ 562.2489, found 562.2481.

3.2.7. Synthesis of N-(5-(4-Methoxyphenyl)-4-((4-methoxyphenyl)ethynyl)-1H-imidazol-2-yl) Acetamide (8)

To a stirring solution of Compound 7 (1.0 g, 1.8 mmol) in anhydrous CH₂Cl₂ (50 mL) was added triethylamine (2.5 mL, 18.0 mmol) and acetic anhydride (0.9 mL, 9.0 mmol). After stirring for 4 h at reflux, the solvent was removed under vacuum, the residue was dissolved in CH₃OH (50 mL) and concentrated hydrochloric acid (5 mL) was added at 0 °C. After stirring for 4 h at room temperature, the solvent was removed under vacuum. The residue was poured into saturated NaHCO₃ solution and extracted with ethyl acetate (2 × 100 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate, 2:1) to give compound 8 (400 mg, 62%) as a pale yellow solid. ¹H NMR (500 MHz, DMSO-d₆) δ 11.88 (s, 1H), 11.31 (s, 1H), 7.98 (s, 2H), 7.48 (d, J = 8.2 Hz, 2H), 7.00 (m, 4H), 3.79 (s, 3H), 3.78 (s, 3H), 2.08 (s, 3H). ¹³C NMR (126 MHz, DMSO-d₆) δ 169.09, 159.79, 158.83, 141.39, 140.22, 132.76, 129.12, 127.07, 126.94, 115.15, 114.94, 114.37, 103.97, 95.27, 80.60, 55.76, 55.57, 23.28. HRMS calcd for C₂₁H₂₀O₃N₃[M + H]⁺ 362.1499, found 362.1496.

3.2.8. Synthesis of N-(5-(4-Methoxyphenyl)-4-(2-(4-methoxyphenyl)-2-oxoacetyl)-1H-imidazol-2-yl) Acetamide (9)

To a stirring solution of Compound 8 (360 mg, 1.0 mmol) in DMF (30 mL) was added Hg(NO₃)₂⸱1/2H₂O (667.2 mg, 2.0 mmol). After stirring for 4 h at room temperature, the solvent was removed under vacuum. The residue was poured into water and extracted with ethyl acetate (2 × 50 mL). The combined organic layers were washed with water brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate, 2:1) to give compound 9 (200 mg, 51%) as a yellow solid. [Caution: Mercury salts are highly toxic. Handling of all mercury compounds should be done carefully.] ¹H NMR (500 MHz, DMSO-d₆) δ 12.50 (s, 1H), 11.21 (s, 1H), 7.92 (m, 2H), 7.80 (m, 2H), 7.07 (m, 4H), 3.84 (s, 3H), 3.83 (s, 3H), 2.01 (s, 3H). ¹³C NMR (101 MHz, DMSO-d₆) δ 194.48, 190.76, 169.87, 164.56, 160.71, 145.96, 141.69, 136.84, 132.16, 130.89, 129.05, 126.31, 120.63, 115.01, 114.13, 56.20, 55.82, 23.15. HRMS calcd for C₂₁H₂₀O₅N₃[M + H]⁺ 394.1397, found 394.1392.

3.2.9. Synthesis of N-(5-(4-Hydroxyphenyl)-4-(2-(4-hydroxyphenyl)-2-oxoacetyl)-1H-imidazol-2-yl) Acetamide (10)

To a stirring solution of Compound 9 (200 mg, 0.5 mmol) in anhydrous CH₂Cl₂ (25 mL) was added BBr₃ (48 µL, 2.5 mmol) at 0 °C. The mixture was allowed to room temperature and stirred for 4 h. The mixture was neutralized carefully with saturated aqueous NaHCO₃ at 0 °C and extracted with CH₂Cl₂ (2 × 50 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (CH₂Cl₂/CH₃OH, 30:1) to give compound 10 (120 mg, 66%) as a yellow solid. ¹H NMR (500 MHz, DMSO-d₆) δ 12.34 (s, 1H), 11.20 (s, 1H), 10.63 (s, 1H), 9.93 (s, 1H), 7.80 (d, J = 8.3 Hz, 2H), 7.68 (d, J = 8.5 Hz, 2H), 6.88 (t, J = 9.0 Hz, 4H), 2.01 (s, 3H). ¹³C NMR (125 MHz, DMSO-d₆) δ 194.34, 190.93, 169.94, 163.59, 159.18, 142.52, 141.48, 132.43, 130.87, 128.77, 125.02, 119.08, 116.27, 115.48, 110.74, 107.32, 23.13. HRMS calcd for C₁₉H₁₆O₅N₃ [M + H]⁺ 366.1084, found 366.1076.

3.2.10. Synthesis of Lissodendrin B (11)

To a stirring solution of Compound 10 (100 mg, 0.27 mmol) in CH₃OH (30 mL) and water (5 mL) was added concentrated H₂SO₄ (1 mL) at 0 °C. After stirring for 4 h at 80 °C, the reaction mixture was neutralized carefully with saturated aqueous NaHCO₃ at 0 °C and extracted with ethyl acetate (2 × 50 mL). The combined organic layers were washed with water, brine, dried (anhydrous Na₂SO₄) and concentrated. The crude residue was purified by silica gel column chromatography (CH₂Cl₂/CH₃OH, 30:1) to give Lissodendrin B (45 mg, 51%) as a yellow solid. ¹H NMR (500 MHz, CH₃OH-d₄) δ 7.60 (d, J = 8.7 Hz, 2H), 7.14 (m, 2H), 6.78 (d, J = 8.7 Hz, 2H), 6.54 (d, J = 8.5 Hz, 2H). ¹³C NMR (125 MHz, CH₃OH-d₄) δ 194.32, 184.00, 164.90, 159.74, 155.32, 154.43,133.39, 132.07, 126.79, 124.69, 123.36, 116.47, 115.57. HRMS calcd for C₁₇H₁₄O₄N₃[M + H]⁺ 324.0979, found 324.0974.

4. Conclusions

In summary, a concise total synthesis of marine alkaloids Lissodendrin B was accomplished in ten steps giving an overall yield of 1.1%. Highlights of the synthesis included: (1) the precursor 4,5-disubstituted imidazole construction based on Suzuki coupling and Sonogashira coupling reactions, (2) 2-aminoimidazole skeleton synthesis using C2-azidation and reduction of the azide, and (3) the α-diketone structure preparation based on the oxidation of the triple-bond. Cost-effective reagents and mild reaction conditions were used in each step of our route. Results from this study are useful for design and synthesis of novel bioactive 2-aminoimidazole alkaloids. Further biological activity studies are underway and will be reported in due course.