Next Article in Journal
A Graphene Oxide-Based Fluorescent Platform for Probing of Phosphatase Activity
Next Article in Special Issue
Selective Labeling of Proteins on Living Cell Membranes Using Fluorescent Nanodiamond Probes
Previous Article in Journal
Nitrogen-Doped Banana Peel–Derived Porous Carbon Foam as Binder-Free Electrode for Supercapacitors
Previous Article in Special Issue
Upconverting NIR Photons for Bioimaging
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 6
Issue 1
10.3390/nano6010019
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Synthesis of Nickel Nanowires with Tunable Characteristics

by
Zengzilu Xia
and
Weijia Wen
*
Nano Science and Technology Program, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong
*
Author to whom correspondence should be addressed.
Nanomaterials 2016, 6(1), 19; https://0-doi-org.brum.beds.ac.uk/10.3390/nano6010019
Submission received: 24 November 2015 / Revised: 21 December 2015 / Accepted: 11 January 2016 / Published: 15 January 2016
(This article belongs to the Special Issue Nanoparticles in Bioimaging)
Browse Figures
Versions Notes

Abstract

:
A one-step synthesis of magnetic nickel nanowires (NiNWs) with tunable characteristics is reported. The method is simple and easy to be conducted, leading to high compatibility with scaling-up. It is discovered that the size and morphology of NiNWs can be adjusted by tuning the reaction temperature, time length, as well as surfactant concentration. It is found that the products have shown high purity which remained after being stored for several months. A remarkable enhanced saturation magnetization of the product was also observed, compared to that of bulk nickel. By providing both practical experimental details and in-depth mechanism, the work introduced in this paper may advance the mass production and further applications of NiNWs.

Graphical Abstract

1. Introduction

In the view of nanomaterials, morphology and size are proved to serve a significantly important role in determining their properties, such as reactivity, opto-electronic, and magnetic properties [1,2]. Nickel (Ni) is a celebrated magnetic material, having potential applications in storage media, microwave absorption, catalysis, and clinical treatment [3,4,5,6,7]. It is remarkable that magnetic properties of Ni nanomaterial are strongly dependent to the finite-size effect, and can be varied by controlling the shape and size [8,9]. Diverse types of morphologies and sizes of Ni nanomaterials have been synthesized, including chains [10], belts [11], tubules [12], rods [13], triangular plates [14], hexagonal hierarchy [9], hollow spheres [15], particles, and flowers [16]. Among these members, nickel nanowire (NiNW) is a prominent example for having different properties from bulk metal due to the one-dimensional (1D) geometry and large shape anisotropy, which can enhance the coercivity and prevent it from becoming superparamagnetic [17,18]. Based on the special properties of NiNWs, numerous promising applications have been achieved, such as optical sensing, plasmonic resonance sensors, perpendicular magnetic storage, functional devices, negative permeability, biological separation, wire-grid type micro polarizer, trenches, and capacitors [19,20].
Different techniques generating NiNWs include, but are not limited to, chemical vapor deposition (CVD) [21], electrochemical deposition [19,22], electrospinning [23,24], bacterial system approach [25], microwave-assisted process [17,26], and solvothermal methods [27]. Despite these techniques successfully fabricating products, a further scale-up of production would be mitigated for the specialized requirements and cost, such as the templates (CVD and electrodeposition), high voltage (electrospinning), biological culture (bacterial system), high energy processing, Teflon-lined stainless steel autoclaves (solvothermal approach), or microwave generators (microwave heating). Consequently, an approach which could be conducted with little time, without catalysts or extraneous chemicals, at a relatively low temperature, under ambient pressure conditions is desirable for synthesis of NiNW with a well-defined 1D structure. To date, various groups have been focusing on this expectation and investigated several simple and mild conditions [28,29,30,31,32,33,34], yet there are still some gaps. For instance, when using sodium borohydride (NaBH4) as the reduction agent, boron could be absorbed into the product [30,35] and, thus, the NiNWs are no longer pure elemental metal. Meanwhile, it should be noted that sodium hydroxide (NaOH) has been widely used in NiNWs synthesis [11,36,37,38] for serving as a pH adjustor and catalyst [39]. Since it is not a necessary chemical for 1D structure formation, we would like to design the experiment without NaOH.
Therefore, the development of a facile method to synthesize high purity NiNWs is necessary and important. In this work, we synthesized highly pure NiNW with a mild and conducive reaction which does not need extraneous chemicals. These pure NiNWs showed high stability under ambient conditions. At the same time, investigations of reaction conditions for morphology controlling were conducted based on the information from X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), and vibrating sample magnetometer (VSM). Our method and the results in this article are expected to provide useful information for further NiNW researches such as biological applications, and its industrial mass production.

2. Results and Discussion

The NiNWs synthesized with typical conditions was characterized to study its structure and morphology. The product was a dark gray solid with metallic luster, having a nice dispersibility in ethanol, and it could be sufficiently attracted by an external magnet (Figure 1a,b). The process of dispersing and aggregating was reversible. The XRD pattern peaks (Figure 1c) located at 44.5°, 51.9°, 76.5°, and 92.9° could be matched with (111), (200), (220), and (311) crystalline planes corresponding to the face-centered cubic (fcc) structure of Ni (Joint Committee on Powder Diffraction Standards File No. 04-0850). The XRD analysis revealed that the NiNWs were crystallized with a lattice constant of 2.037 Å. Dimensions of product were evaluated from the analysis of 50 individual NiNWs to represent the general size of the product, while the morphology would consist of the surface appearance of NW and the shape anisotropy expressed by the aspect ratio or length-to-width ratio (LWR) calculated with the mean values of length and width. SEM images (Figure 1d,e) demonstrate NiNWs having an average length of 52 ± 17 μm, an average diameter of 330 ± 60 nm, and corresponding LWR of 158 ± 58. Based on the TEM images, the body of NiNWs indicated highly uniform shape (Figure 1f). Smaller diameters appeared than the NW main body, and there were nanoparticles linked to the NiNW end (Figure 1g). Several isolated Ni nanospheres were observed existing among NWs (Figure 1d). However, the amount of NiNWs was dominant in this system, at about 99%, and the amount of Ni nanoparticles would reduce with more washing.
In order to have better control on the NiNW size and morphology in this system, investigations of the impact from three reaction parameters, namely temperature, time, and surfactant concentration, on the product were conducted.
Nanomaterials 06 00019 g001a 1024Nanomaterials 06 00019 g001b 1024
Figure 1. The photographs of nickel nanowires (NiNWs) (a) dispersed in ethanol (b) attracted by an external magnet, (c) X-ray diffraction (XRD) patterns, (d) low and (e) high magnification scanning electron microscopy (SEM) images of NiNWs; and the transmission electron microscopy (TEM) images of (f) the body and (g) the end of a NiNW.
Figure 1. The photographs of nickel nanowires (NiNWs) (a) dispersed in ethanol (b) attracted by an external magnet, (c) X-ray diffraction (XRD) patterns, (d) low and (e) high magnification scanning electron microscopy (SEM) images of NiNWs; and the transmission electron microscopy (TEM) images of (f) the body and (g) the end of a NiNW.
Nanomaterials 06 00019 g001aNanomaterials 06 00019 g001b

2.1. Reaction Temperature Control

We found that the reaction temperature plays an important role in determining the size and morphology of NiNWs. Experiments were conducted with reaction temperature at 60, 70, 80, 90, 100, 110, 120, 125, 135, and 150 °C. SEM images indicate a continuous change of NiNW appearance with the reaction temperature (Figure 2a–c). As the temperature increased, the reaction increased in efficiency. For instance, it took about 100 min to form floating solid product at 70 °C, while only 5 min required to complete NiNW formation at 150 °C. The changes of average length, average width, and LWR versus the temperature were given in line charts (Figure 2d–f). The largest shape anisotropy belonged to the NWs synthesized at reaction temperature of 100 °C, and it dropped sharply when the temperature reached above 125 °C. Lower reaction temperatures lead to larger dimensions of NiNWs and palpable growth of the surface nanopricks. Although products synthesized at lower temperature should have larger dimensions than the ones synthesized at higher temperature, they usually had many NWs with short length or fragments which diminishing the average values. It should be noted that there was an obvious decrease of yield when reaction temperature was below 90 °C, and eventually no product was obtained at 60 °C. The size and number of nanopricks on the NiNW surface can sufficiently influence the surface-to-volume value. This phenomenon is worth being noted, since there are few reports focusing on promoting the growth of these nanopricks. Among the three parameters discussed in this article, low temperature is the only one which could provide an obvious furtherance to the growth of the surface nanopricks. When reaction temperature was above 90 °C, the number and size of nanopricks would decline sharply. There was no more obvious presence of surface nanopricks when the temperature was at 150 °C.
Nanomaterials 06 00019 g002 1024
Figure 2. SEM images with same magnification of NiNWs synthesized at (a) 70 °C, (b) 110 °C, and (c) 150 °C. The change of (d) length, (e) width, and (f) length-to-width ratio (LWR) of NiNWs with temperature.
Figure 2. SEM images with same magnification of NiNWs synthesized at (a) 70 °C, (b) 110 °C, and (c) 150 °C. The change of (d) length, (e) width, and (f) length-to-width ratio (LWR) of NiNWs with temperature.
Nanomaterials 06 00019 g002

2.2. Reaction Time Length Control

For the investigation of time, NiNWs were prepared by conducting the experiment with a reaction time length of 1 min, 3 min, 10 min, 30 min, and 90 min, separately. According to the SEM images (Figure 3a–c), it is notable that the reaction time had a strong influence on the size of the product, yet it might not have significant effect on the formation of surface nanopricks on NiNW after 1 min. The length, as well as width, of NiNWs would increase quickly in the first 10 min, with a sudden change of the shape anisotropy (Figure 3d–f). Then the growth would slow down, and there was finally no distinct growth 30 min after the reaction started. This result is consistent with the time taken for the solid product forming and floating to the solution surface of about 30 min in a typical synthesis procedure. The sensitivity to reaction time in the first 10 min gave an advantage for controlling the NiNW dimensions, as well as the anisotropy, by simply controlling the time length. While small-sized NiNWs could be obtained with a short time, the low yield of the product would be a significant drawback in this case. The independency of NiNW size and morphology from the time after 30 min would provide a huge convenience in industrial fabrication due to a less harsh requirement for reaction time control. Meanwhile, this group of samples can be used to study the NiNW growth mechanism, which will be discussed at Section 2.5 in detailed.
Nanomaterials 06 00019 g003 1024
Figure 3. Typical SEM images with same magnification of NiNWs synthesized with (a) 1 min, (b) 10 min, and (c) 90 min. The change of (d) length, (e) width, and (f) LWR of NiNWs with reaction time.
Figure 3. Typical SEM images with same magnification of NiNWs synthesized with (a) 1 min, (b) 10 min, and (c) 90 min. The change of (d) length, (e) width, and (f) LWR of NiNWs with reaction time.
Nanomaterials 06 00019 g003

2.3. Surfactant Concentration Control

PVP served as regular surfactant in NiNW synthesis [2,40]. To investigate the influence from surfactant concentration, NiNWs were synthesized with PVP concentrations of 0.03, 0.5, 1, 2, 5, and 10 w/v % in EG, respectively (Figure 4a–c). The typical synthesized product is considered as having no PVP condition in this part of discussion. Changes of dimensions, as well as LWR versus PVP concentration change, were present as line charts (Figure 4d–f). Although PVP concentration showed no significant impact on the yield and reaction time length, there was no product when PVP concentrations were higher than 2 w/v %. We noted that PVP had a strong control on the diameter of NWs, which was consistent with the stabilization function of PVP on the surface of NWs. When the PVP concentration was 2 w/v %, the average width was only 90 ± 20 nm, which was the smallest dimension among all the obtained products and is the only average value less than 100 nm. PVP also served a role in reducing the shape anisotropy of NiNWs and restrained the growth of surface nanopricks. For instance, NiNWs with LWR of 74 ± 34 had no nanopricks on the surface (Figure S1). This smooth surface could not be obtained by varying temperature or reaction time, yet it was possibly caused by the strength of interaction between PVP and the NiNW surface.
Nanomaterials 06 00019 g004 1024
Figure 4. SEM images with same magnification of NiNWs synthesized with poly(vinylpyrrolidone) (PVP) concentration of (a) 0.03 w/v %, (b) 0.5 w/v %, and (c) 2 w/v %. The change of (d) length, (e) width, and (f) LWR of NiNWs with PVP concentration.
Figure 4. SEM images with same magnification of NiNWs synthesized with poly(vinylpyrrolidone) (PVP) concentration of (a) 0.03 w/v %, (b) 0.5 w/v %, and (c) 2 w/v %. The change of (d) length, (e) width, and (f) LWR of NiNWs with PVP concentration.
Nanomaterials 06 00019 g004

2.4. Purity and Magnetic Properties

One remarkable property of our product is the high purity which is expected to be stable over the long-term under ambient storage conditions. NiNWs synthesized with PVP addition had oxygen and nitrogen peaks in the EDS spectra, but these peaks might come from the PVP remaining on NWs (Figure S1). In addition, the noticeable carbon peak and silicon peak could be attributed to the carbon tape and underlying silicon wafer, respectively. For samples synthesized without PVP, although a small peak could be found at the characteristic position of oxygen K-series in the EDS spectra, the amount of oxygen was undetectable (Figure 5). This indicated the high purity of our products and we believed that the small amount of NiO was located on the NiNWs surface to prevent further oxidation. In fact, the typicaly synthesized product showed superior ambient storage stability. As shown in Figure S2, the high purity remained even after one month in air at room temperature, and only a small amount of oxygen was detected after five months. NiNW also kept this high purity even after a treatment at 70 °C for 30 h. Consequently, these pure NiNWs could be claimed to be inert under ambient condition with normal temperature and pressure.
Another remarkable point is the enhanced magnetic property. The saturation magnetization (Ms) of bulk nickel is 55 emu/g, remnant magnetism (Mr) is 2.7 emu/g, and coercivity (Hc) is 100 Oe at room temperature [41]. In this system, the typically fabricated product has Ms 50.8 emu/g, Mr 19.9 emu/g, and Hc 167.7 Oe at room temperature (Figure 5). Compared to the bulk Ni, our product showed enhanced Mr and Hc properties, which would be consistent of its shape anisotropy. The bulk Ni should generally have a higher Ms than NiNW counterparts, because the total magnetic moment of magnetic nanostructures has been reduced by the surface spin disorder [37]. The larger size the product has, the closer magnetic properties approaching to the bulk material (Table S1). The The Ms value was proportional to the NiNW diameter, while the Hc showed reverse proportional to that. This result was consistent to the published report [17].
Nanomaterials 06 00019 g005 1024
Figure 5. The typical energy-dispersive X-ray spectroscopy (EDS) spectrum. The inset is hysteretic loop at room temperature of typical NiNWs. These characterizations were conducted on the product synthesized with typical process.
Figure 5. The typical energy-dispersive X-ray spectroscopy (EDS) spectrum. The inset is hysteretic loop at room temperature of typical NiNWs. These characterizations were conducted on the product synthesized with typical process.
Nanomaterials 06 00019 g005

2.5. Reaction Mechanism

A plausible scheme of the NiNW growth mechanism is that a soluble complex of Ni ions and N2H4 would be formed when N2H4·H2O was added into the solution [27,42]. N2H4 served as a bridging bidentate ligand towards the metal center besides acting as the reduction agent [43], which caused the solution become blue. The solution changed to turbid in a very short time because this complex would be quickly reduced into a short chain-like nanostructure [37]. With Ostwald ripening and further growth, large shape anisotropy NiNWs could be obtained. The morphology and size change of time-controlled products might be considered as supporting evidence to the above statement. A supplementary hypothesis is suggested to the present scheme. Since Ni nanoparticles existed in the final product, the growth of such nanoparticles should be considered as a competitive process to the NiNW formation (Figure 6). Although other reports [30,37,38] believe that single Ni nuclei would be formed before the formation of short nanochains, the exact evidence for this stage could not be observed by our sampling (Figure S3).
Nanomaterials 06 00019 g006 1024
Figure 6. The illustration of NiNW growth mechanism. The inset is the detailed illustration of Step 2 to 4.
Figure 6. The illustration of NiNW growth mechanism. The inset is the detailed illustration of Step 2 to 4.
Nanomaterials 06 00019 g006

3. Experimental Section

Chemicals. Nickel (II) chloride hexahydrate (NiCl2·6H2O; 99.9%), ethylene glycol (EG; 99.8%), hydrazine monohydrate (N2H4·H2O; 98%), and poly(vinylpyrrolidone) (PVP; Mw, 40,000) were purchased from Sigma-Aldrich (St Louis, MO, USA). Ultrapure deionized water (DI; millipore water systems) with resistivity 18.2 MΩ·cm−1 was used throughout the work. All chemicals were used without further purification.
Process. In a typical procedure, 75 μL 1 M aqueous NiCl2 solution and 15 mL EG were mixed and heated to 100 °C, and then 0.5 mL N2H4·H2O was added in, dropwise. The whole mixture was maintained at this temperature for about 30 min until the dark gray product was formed and eventually floated at the solution surface. The dark gray product was then washed with DI water and anhydrous ethanol several times by magnetic decantation, and then dispersed in ethanol for further characterization. For PVP-controlled conditions, specific concentration of PVP in EG solution was used instead of pure EG as the solvent in this system.
Characterization. The XRD pattern was recorded on PANalytical X’pert Pro diffractometer (Cukα1 radiation, λ = 1.540562 Å, 40 kV, 40 mA, Almelo, Netherlands). SEM and TEM images were obtained with JEOL JEM6390 SEM and JEOL JEM100CXII TEM (Tokyo, Japan), correspondingly. EDS patterns were obtained with the capabilities (Bruker, XFlash Detector 4010, Billerica, MA, USA) equipped on SEM. VSM measurements were conducted by LakeShore 7300 VSM (Westerville, OH, USA) at room temperature with a maximum magnetic field of 5 kOe.

4. Conclusions

In summary, a facile size and morphology-tunable method has been exploited to synthesize pure NiNWs with high stability under ambient storage conditions. The product was observed to be crystallized in the fcc phase and have large shape anisotropy over 100. NiNWs also exhibited an enhanced magnetic properties over bulk Ni due to the large shape anisotropy. The reaction parameters controlling the size and morphology, such as the reaction temperature, time, and surfactant concentration, were investigated in detail. In addition, a supplemental hypothesis was suggested to the present NiNW growth mechanism. It is expected that this method and the complementary results will be serviceable for further development on industrial scale-up fabrication and other NiNW applications.

Supplementary Materials

They are available online at https://0-www-mdpi-com.brum.beds.ac.uk/2079-4991/6/1/19/s1.

Acknowledgments

We thank the Hong Kong RGC grant AOE/P-02/12 for support of this work.

Author Contributions

Z.X. designed and performed all the experiments, interpretation of results and prepared the manuscript. W.W. supervised this work and reviewed the manuscript.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Alivisatos, A.P. Semiconductor clusters, nanocrystals, and quantum dots. Science 1996, 271, 933–937. [Google Scholar] [CrossRef]
  2. Zhou, W.; He, L.; Cheng, R.; Guo, L.; Chen, C.; Wang, J. Synthesis of Ni nanochains with various sizes: The magnetic and catalytic properties. J. Phys. Chem. C 2009, 113, 17355–17358. [Google Scholar] [CrossRef]
  3. Wang, C.; Han, X.; Xu, P.; Wang, J.; Du, Y.; Wang, X.; Qin, W.; Zhang, T. Controlled synthesis of hierarchical nickel and morphology-dependent electromagnetic properties. J. Phys. Chem. C 2010, 114, 3196–3203. [Google Scholar] [CrossRef]
  4. Park, J.; Kang, E.; Son, S.U.; Park, H.M.; Lee, M.K.; Kim, J.; Kim, K.W.; Noh, H.J.; Park, J.H.; Bae, C.J.; et al. Monodisperse nanoparticles of Ni and NiO: Synthesis, characterization, self-assembled superlattices, and catalytic applications in the Suzuki coupling reaction. Adv. Mater. 2005, 17, 429–434. [Google Scholar] [CrossRef]
  5. Metin, O.; Mazumder, V.; Ozkar, S.; Sun, S. Monodisperse nickel nanoparticles and their catalysis in hydrolytic dehydrogenation of ammonia borane. J. Am. Chem. Soc. 2010, 132, 1468–1469. [Google Scholar] [CrossRef] [PubMed]
  6. Hernandez, R.; Polizu, S.; Turenne, S.; Yahia, L. Characteristics of porous nickel-titanium alloys for medical applications. Bio-Med. Mater. Eng. 2002, 12, 37–45. [Google Scholar]
  7. An, Z.; Pan, S.; Zhang, J. Synthesis and tunable assembly of spear-like nickel nanocrystallites: From urchin-like particles to prickly chains. J. Phys. Chem. C 2009, 113, 1346–1351. [Google Scholar] [CrossRef]
  8. Leng, Y.; Li, Y.; Li, X.; Takahashhi, S. Improved magnetic anisotropy of monodispersed triangular nickel nanoplates. J. Phys. Chem. C 2007, 111, 6630–6633. [Google Scholar] [CrossRef]
  9. Ni, X.; Zhao, Q.; Zhang, D.; Zhang, X.; Zheng, H. Novel hierarchical nanostructures of nickel: Self-assembly of hexagonal nanoplatelets. J. Phys. Chem. C 2007, 111, 601–605. [Google Scholar] [CrossRef]
  10. Liu, C.M.; Guo, L.; Wang, R.M.; Deng, Y.; Xu, H.B.; Yang, S. Magnetic nanochains of metal formed by assembly of small nanoparticles. Chem. Commun. 2004, 23, 2726–2727. [Google Scholar] [CrossRef] [PubMed]
  11. Liu, Z.P.; Li, S.; Yang, Y.; Peng, S.; Hu, Z.K.; Qian, Y.T. Complex-surfactant-assisted hydrothermal route to ferromagnetic nickel nanobelts. Adv. Mater. 2003, 15, 1946–1948. [Google Scholar] [CrossRef]
  12. Bao, J.; Tie, C.; Xu, Z.; Zhou, Q.; Shen, D.; Ma, Q. Template synthesis of an array of nickel nanotubules and its magnetic behavior. Adv. Mater. 2001, 13, 1631–1633. [Google Scholar] [CrossRef]
  13. Cordente, N.; Respaud, M.; Senocq, F.; Casanove, M.J.; Amiens, C.; Chaudret, B. Synthesis and magnetic properties of nickel nanorods. Nano Lett. 2001, 1, 565–568. [Google Scholar] [CrossRef]
  14. Bradley, J.S.; Tesche, B.; Busser, W.; Maase, M.; Reetz, M.T. Surface spectroscopic study of the stabilization mechanism for shape-selectively synthesized nanostructured transition metal colloids. J. Am. Chem. Soc. 2000, 122, 4631–4636. [Google Scholar] [CrossRef]
  15. Bao, J.C.; Liang, Y.Y.; Xu, Z.; Si, L. Facile synthesis of hollow nickel submicrometer spheres. Adv. Mater. 2003, 15, 1832–1835. [Google Scholar] [CrossRef]
  16. Xu, W.; Liew, K.Y.; Liu, H.; Huang, T.; Sun, C.; Zhao, Y. Microwave-assisted synthesis of nickel nanoparticles. Mater. Lett. 2008, 62, 2571–2573. [Google Scholar] [CrossRef]
  17. Tang, S.; Vongehr, S.; Ren, H.; Meng, X. Diameter-controlled synthesis of polycrystalline nickel nanowires and their size dependent magnetic properties. CrystEngComm 2012, 14, 7209–7216. [Google Scholar] [CrossRef]
  18. Nassima, O.; Samir, F.; Silvana, M.; Fatih, Z.; Frédéric, S.; Noureddine, J.; Ivaylo, H.; Guillaume, W.; Christian, R. Magnetic nanowire synthesis: A chemical engineering approach. AlChE J. 2015, 61, 304–316. [Google Scholar] [CrossRef]
  19. Yalçın, O.; Kartopu, G.; Çetin, H.; Demiray, A.S.; Kazan, S. A comparison of the magnetic properties of Ni and Co nanowires deposited in different templates and on different substrates. J. Magn. Magn. Mater. 2015, 373, 207–212. [Google Scholar] [CrossRef]
  20. Krishnadas, K.R.; Sajanlal, P.; Pradeep, T. Pristine and hybrid nickel nanowires: Template-, magnetic field-, and surfactant-free wet chemical synthesis and Raman studies. J. Phys. Chem. C 2011, 115, 4483–4490. [Google Scholar] [CrossRef]
  21. Pradhan, B.K.; Kyotani, T.; Tomita, A. Nickel nanowires of 4 nm diameter in the cavity of carbon nanotubes. Chem. Commun. 1999, 14, 1317–1318. [Google Scholar] [CrossRef]
  22. Tian, F.; Zhu, J.; Wei, D. Phase transition and magnetism of Ni nanowire arrays. J. Phys. Chem. C 2007, 111, 6994–6997. [Google Scholar] [CrossRef]
  23. Wu, H.; Zhang, R.; Liu, X.; Lin, D.; Pan, W. Electrospinning of Fe, Co, and Ni nanofibers: Synthesis, assembly, and magnetic properties. Chem. Mater. 2007, 19, 3506–3511. [Google Scholar] [CrossRef]
  24. Barakat, N.A.; Kim, B.; Kim, H.Y. Production of smooth and pure nickel metal nanofibers by the electrospinning technique: Nanofibers possess splendid magnetic properties. J. Phys. Chem. C 2008, 113, 531–536. [Google Scholar] [CrossRef]
  25. Faivre, D. Formation of magnetic nanoparticle chains in bacterial systems. MRS Bull. 2015, 40, 509–515. [Google Scholar] [CrossRef]
  26. Hu, X.; Yu, J.C. High-yield synthesis of nickel and nickel phosphide nanowires via microwave-assisted processes. Chem. Mater. 2008, 20, 6743–6749. [Google Scholar] [CrossRef]
  27. Sun, L.; Chen, Q.; Tang, Y.; Xiong, Y. Formation of one-dimensional nickel wires by chemical reduction of nickel ions under magnetic fields. Chem. Commun. 2007, 27, 2844–2846. [Google Scholar] [CrossRef] [PubMed]
  28. Ding, Q.; Liu, H.; Yang, L.; Liu, J. Speedy and surfactant-free in situ synthesis of nickel/Ag nanocomposites for reproducible SERS substrates. J. Mater. Chem. 2012, 22, 19932–19939. [Google Scholar] [CrossRef]
  29. Zhang, G.; Zhang, T.; Lu, X.; Wang, W.; Qu, J.; Li, X. Controlled synthesis of 3D and 1D nickel nanostructures using an external magnetic field assisted solution-phase approach. J. Phys. Chem. C 2007, 111, 12663–12668. [Google Scholar] [CrossRef]
  30. Sarkar, S.; Sinha, A.K.; Pradhan, M.; Basu, M.; Negishi, Y.; Pal, T. Redox transmetalation of prickly nickel nanowires for morphology controlled hierarchical synthesis of nickel/gold nanostructures for enhanced catalytic activity and SERS responsive functional material. J. Phys. Chem. C 2010, 115, 1659–1673. [Google Scholar] [CrossRef]
  31. Ding, Q.; Ma, Y.; Ye, Y.; Yang, L.; Liu, J. A simple method to prepare the magnetic Ni@Au core-shell nanostructure for the cycle surface enhanced Raman scattering substrates. J. Raman Spectrosc. 2013, 44, 987–993. [Google Scholar] [CrossRef]
  32. Gong, C.; Yu, L.; Duan, Y.; Tian, J.; Wu, Z.; Zhang, Z. The fabrication and magnetic properties of Ni fibers synthesized under external magnetic fields. Eur. J. Inorg. Chem. 2008, 2008, 2884–2891. [Google Scholar] [CrossRef]
  33. Jia, F.L.; Zhang, L.Z.; Shang, X.Y.; Yang, Y. Non-aqueous sol–gel approach towards the controllable synthesis of nickel nanospheres, nanowires, and nanoflowers. Adv. Mater. 2008, 20, 1050–1054. [Google Scholar] [CrossRef]
  34. Kong, Y.Y.; Pang, S.C.; Chin, S.F. Facile synthesis of nickel nanowires with controllable morphology. Mater. Lett. 2015, 142, 1–3. [Google Scholar] [CrossRef]
  35. Glavee, G.N.; Klabunde, K.J.; Sorensen, C.M.; Hadjipanayis, G.C. Chemistry of borohydride reduction of iron (II) and iron (III) ions in aqueous and nonaqueous media. Formation of nanoscale Fe, FeB, and Fe2B powders. Inorg. Chem. 1995, 34, 28–35. [Google Scholar] [CrossRef]
  36. Liu, N.; Li, J.; Ma, W.; Liu, W.; Shi, Y.; Tao, J.; Zhang, X.; Su, J.; Li, L.; Gao, Y. Ultrathin and lightweight 3D free-standing Ni@NiO nanowire membrane electrode for a supercapacitor with excellent capacitance retention at high rates. ACS Appl. Mater. Interfaces 2014, 6, 13627–13634. [Google Scholar] [CrossRef] [PubMed]
  37. Gong, C.; Zhang, J.; Zhang, X.; Yu, L.; Zhang, P.; Wu, Z.; Zhang, Z. Strategy for ultrafine Ni fibers and investigation of the electromagnetic characteristics. J. Phys. Chem. C 2010, 114, 10101–10107. [Google Scholar] [CrossRef]
  38. Zhao, B.; Fan, B.; Shao, G.; Wang, B.; Pian, X.; Li, W.; Zhang, R. Investigation on the electromagnetic wave absorption properties of Ni chains synthesized by a facile solvothermal method. Appl. Surf. Sci. 2014, 307, 293–300. [Google Scholar] [CrossRef]
  39. Wu, S.H.; Chen, D.H. Synthesis and characterization of nickel nanoparticles by hydrazine reduction in ethylene glycol. J. Colloid Interface Sci. 2003, 259, 282–286. [Google Scholar] [CrossRef]
  40. Sun, L.; Chen, Q. Magnetic field effects on the formation and properties of nickel nanostructures. Eur. J. Inorg. Chem. 2009, 2009, 435–440. [Google Scholar] [CrossRef]
  41. Hwang, J.H.; Dravid, V.P.; Teng, M.H.; Host, J.J.; Elliott, B.R.; Johnson, D.L.; Mason, T.O. Magnetic properties of graphitically encapsulated nickel nanocrystals. J. Mater. Res. 1997, 12, 1076–1082. [Google Scholar] [CrossRef]
  42. Chie, K.; Fujiwara, M.; Fujiwara, Y.; Tanimoto, Y. Magnetic separation of metal ions. J. Phys. Chem. B 2003, 107, 14374–14377. [Google Scholar] [CrossRef]
  43. Lin, B.; Wang, R.; Lin, J.; Du, S.; Yu, X.; Wei, K. Preparation of chlorine-free alumina-supported ruthenium catalyst for ammonia synthesis base on RuCl3 by hydrazine reduction. Catal. Commun. 2007, 8, 1838–1842. [Google Scholar] [CrossRef]

Share and Cite

MDPI and ACS Style

Xia, Z.; Wen, W. Synthesis of Nickel Nanowires with Tunable Characteristics. Nanomaterials 2016, 6, 19. https://0-doi-org.brum.beds.ac.uk/10.3390/nano6010019

AMA Style

Xia Z, Wen W. Synthesis of Nickel Nanowires with Tunable Characteristics. Nanomaterials. 2016; 6(1):19. https://0-doi-org.brum.beds.ac.uk/10.3390/nano6010019

Chicago/Turabian Style

Xia, Zengzilu, and Weijia Wen. 2016. "Synthesis of Nickel Nanowires with Tunable Characteristics" Nanomaterials 6, no. 1: 19. https://0-doi-org.brum.beds.ac.uk/10.3390/nano6010019

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop