Next Article in Journal
Multi-Year Mapping of Major Crop Yields in an Irrigation District from High Spatial and Temporal Resolution Vegetation Index
Next Article in Special Issue
Design and Calibration of a Low-Cost SDI-12 Soil Moisture Sensor
Previous Article in Journal
BeeKeeper 2.0: Confidential Blockchain-Enabled IoT System with Fully Homomorphic Computation
Article

Performance Assessment of Five Different Soil Moisture Sensors under Irrigated Field Conditions in Oklahoma

1
Department of Biosystems and Agricultural Engineering, Oklahoma State University, Stillwater, OK 74078, USA
2
Department of Plant and Soil Sciences, Oklahoma State University, Stillwater, OK 74078, USA
3
USDA-ARS Grazinglands Research Laboratory, El Reno, OK 73036, USA
*
Author to whom correspondence should be addressed.
Received: 9 October 2018 / Revised: 29 October 2018 / Accepted: 2 November 2018 / Published: 5 November 2018
(This article belongs to the Special Issue Sensors and Systems for Smart Agriculture)
Meeting the ever-increasing global food, feed, and fiber demands while conserving the quantity and quality of limited agricultural water resources and maintaining the sustainability of irrigated agriculture requires optimizing irrigation management using advanced technologies such as soil moisture sensors. In this study, the performance of five different soil moisture sensors was evaluated for their accuracy in two irrigated cropping systems, one each in central and southwest Oklahoma, with variable levels of soil salinity and clay content. With factory calibrations, three of the sensors had sufficient accuracies at the site with lower levels of salinity and clay, while none of them performed satisfactorily at the site with higher levels of salinity and clay. The study also investigated the performance of different approaches (laboratory, sensor-based, and the Rosetta model) to determine soil moisture thresholds required for irrigation scheduling, i.e., field capacity (FC) and wilting point (WP). The estimated FC and WP by the Rosetta model were closest to the laboratory-measured data using undisturbed soil cores, regardless of the type and number of input parameters used in the Rosetta model. The sensor-based method of ranking the readings resulted in overestimation of FC and WP. Finally, soil moisture depletion, a critical parameter in effective irrigation scheduling, was calculated by combining sensor readings and FC estimates. Ranking-based FC resulted in overestimation of soil moisture depletion, even for accurate sensors at the site with lower levels of salinity and clay. View Full-Text
Keywords: volumetric water content; salinity; soil moisture depletion; irrigation management volumetric water content; salinity; soil moisture depletion; irrigation management
Show Figures

Figure 1

MDPI and ACS Style

Datta, S.; Taghvaeian, S.; Ochsner, T.E.; Moriasi, D.; Gowda, P.; Steiner, J.L. Performance Assessment of Five Different Soil Moisture Sensors under Irrigated Field Conditions in Oklahoma. Sensors 2018, 18, 3786. https://0-doi-org.brum.beds.ac.uk/10.3390/s18113786

AMA Style

Datta S, Taghvaeian S, Ochsner TE, Moriasi D, Gowda P, Steiner JL. Performance Assessment of Five Different Soil Moisture Sensors under Irrigated Field Conditions in Oklahoma. Sensors. 2018; 18(11):3786. https://0-doi-org.brum.beds.ac.uk/10.3390/s18113786

Chicago/Turabian Style

Datta, Sumon, Saleh Taghvaeian, Tyson E. Ochsner, Daniel Moriasi, Prasanna Gowda, and Jean L. Steiner 2018. "Performance Assessment of Five Different Soil Moisture Sensors under Irrigated Field Conditions in Oklahoma" Sensors 18, no. 11: 3786. https://0-doi-org.brum.beds.ac.uk/10.3390/s18113786

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop