Next Article in Journal
Controlled Electron-Beam Synthesis of Transparent Hydrogels for Drug Delivery Applications
Next Article in Special Issue
Synthesis and Photoinduced Anisotropy of Polymers Containing Nunchaku-Like Unit with an Azobenzene and a Mesogen
Previous Article in Journal
A Novel Polymethyl Methacrylate Derivative Grafted with Cationic Iridium(III) Complex Units: Synthesis and Application in White Light-Emitting Diodes
Previous Article in Special Issue
Effects of End-Caps on the Atropisomerization, Polymerization, and the Thermal Properties of ortho-Imide Functional Benzoxazines
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Polymers
Volume 11
Issue 3
10.3390/polym11030500
polymers-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Characteristics and Mechanism of Vinyl Ether Cationic Polymerization in Aqueous Media Initiated by Alcohol/B(C6F5)3/Et2O

by
Jinghan Zhang
1,3,
Yibo Wu
2,3,*,
Kaixuan Chen
2,
Min Zhang
2,3,
Liangfa Gong
2,
Dan Yang
2,3,
Shuxin Li
2,3 and
Wenli Guo
1,3,*
1
College of Material Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China
2
Department of Materials Science and Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China
3
Beijing Key Lab of Special Elastomeric Composite Materials, Beijing 102617, China
*
Authors to whom correspondence should be addressed.
Polymers 2019, 11(3), 500; https://0-doi-org.brum.beds.ac.uk/10.3390/polym11030500
Submission received: 28 February 2019 / Revised: 11 March 2019 / Accepted: 11 March 2019 / Published: 14 March 2019
(This article belongs to the Collection Design and Synthesis of Polymers)
Browse Figures
Versions Notes

Abstract

:
Aqueous cationic polymerizations of vinyl ethers (isobutyl vinyl ether (IBVE), 2-chloroethyl vinyl ether (CEVE), and n-butyl vinyl ether (n-BVE)) were performed for the first time by a CumOH/B(C6F5)3/Et2O initiating system in an air atmosphere. The polymerization proceeded in a reproducible manner through the careful design of experimental conditions (adding initiator, co-solvents, and surfactant or decreasing the reaction temperature), and the polymerization characteristics were systematically tested and compared in the suspension and emulsion. The significant difference with traditional cationic polymerization is that the polymerization rate in aqueous media using B(C6F5)3/Et2O as a co-initiator decreases when the temperature is lowered. The polymerization sites are located on the monomer/water surface. Density functional theory (DFT) was applied to investigate the competition between H2O and alcohol combined with B(C6F5)3 for providing a theoretical basis. The effectiveness of the proposed mechanism for the aqueous cationic polymerization of vinyl ethers using CumOH/B(C6F5)3/Et2O was confirmed.

Graphical Abstract

1. Introduction

Conventional cationic polymerizations of vinyl monomers, such as isobutylene (IB), vinyl ethers, and styrene, are usually achieved by using initiator/co-initiator systems primarily in chlorinated solvents under low-temperature and strict water-free conditions [1,2,3,4,5,6,7,8]. Chlorinated solvents seriously damage the environment, and their applications should be limited [9,10]. Under the advocacy of green chemistry, the use of environmentally benign solvents in cationic polymerization has been extensively studied, such as using fewer toxic solvents (e.g., toluene or n-hexane) [11,12,13], supercritical CO2 [14,15], and ionic liquids [16,17,18,19,20]. Water is one of the most ideal polymerization solvents. However, traditional co-initiators are water-sensitive and decompose when excessive quantities of water are present [21,22]. Because Yb(OTf)3 was first investigated as a water-tolerant co-initiator for its ability to induce the polymerization of p-methoxystyrene (pMOS) in 1999 [23], considerable attention has been paid to the utilization of aqueous cationic polymerization. With the development of various water-tolerant Lewis acids (LAs), this new polymer synthesis technology has achieved remarkable breakthroughs [21].
Early studies on aqueous cationic polymerizations of reactive monomer p-methoxystyrene using 1-chloro-1-(p-methoxyphenyl)ethane (pMOS-HCl) combined with lanthanide triflates as an initiator/co-initiator system shared two main features: (a) the polymerization sites were located on the monomer/water surface; (b) the molecular weights of the polymers obtained in aqueous media were relatively low due to the “critical degree of polymerization” effect [23,24,25]. The next generation of catalysts, called “Lewis acid surfactant combined catalysts” (LASC), that is, a triflic acid in conjunction with a non-ionic surfactant, can transfer the polymerization site from the monomer/water surface to the interior of the monomer, resulting in the production of long polymer chains [26,27,28,29]. However, these LASCs still lack activity, and the polymerizations proceed at high temperatures (from 40 °C to 60 °C). Recently, potential initiating systems based on boranes were introduced for the aqueous cationic polymerization of industrially important monomers. BF3OEt2 induces the styrene cationic polymerizations when a small amount of water is present [30,31]. However, excessive quantities of water would easily deactivate this co-initiator in styrene polymerization [30]. B(C6F5)3, which does not decompose in an air atmosphere or in water, successfully promotes the aqueous cationic polymerization of styrene and its derivatives [32,33], cyclopentadiene [33,34] and isoprene [35], but this material is inactive for polymerizing IB [36] and isobutyl vinyl ether (IBVE) [37] in aqueous media. The noncommercial chelating diborane (o-C6F4[B(C6F5)2]2) [38] and diborole (o-C6F4[9-BC12F8]2) [38,39] ionize various cumyl derivatives and play the role of co-initiators in the aqueous cationic polymerization of IB. (Pentafluorophenyl)group 13 metal compounds Al(C6F5)3 and Ga(C6F5)3 [36], which are structurally similar to B(C6F5)3 but unstable in an air atmosphere, were recently tested for the aqueous cationic polymerization of IB under harsh experimental conditions (in LiCl/NaCl/H2O diluents under N2 atmosphere at −60 °C).
To date, only IBVE has been reported for cationic polymerization of vinyl ethers in aqueous media, and there have been no reports on the aqueous cationic polymerization of 2-chloroethyl vinyl ether (CEVE) and n-butyl vinyl ether (n-BVE). To the best of our knowledge, only two types of co-initiators, namely, BF3OEt2 and H3PW12O40 and its salts have been reported for cationic polymerization of IBVE in aqueous media [22,37]. BF3OEt2 induces polymerization in a highly exothermic manner, and H3PW12O40 and its salts induce polymerization in an N2 atmosphere with a previous preparation of IBVE–HCl adduct to provide low-molecular-weight poly(IBVE)s (1200–4500 g mol-1). It is generally believed that B(C6F5)3, which is used to initiate the aqueous cationic polymerization of styrene, cannot initiate the aqueous cationic polymerization of IBVE [37]. However, we believe that B(C6F5)3, which has high activity, will promote the aqueous cationic polymerization of more active monomer vinyl ethers. In this study, we synthesized poly(IBVE)s, poly(CEVE), and poly(n-BVE) in aqueous suspensions and emulsions by using B(C6F5)3/Et2O complexes under an air atmosphere in the range of −10 °C to 20 °C. Severely exothermic reactions and poor polymerization reproducibility were overcome by identifying an appropriate initiator, diluents, and surfactants. We observed that the polymerization rate decreased when the temperature was reduced. The polymerization sites were located on the monomer/water surface. The possible mechanism of vinyl ether cationic polymerization in aqueous media was systematically studied by density functional theory (DFT), kinetics, and end group analysis.

2. Materials and Methods

2.1. Materials

Methanol (Beijing Chemical Works, Beijing, China, 99.9%), ethanol (EtOH, Beijing Chemical Works, 99.7%), cumyl alcohol (CumOH, Beijing Chemical Works, 97%), diethyl ether (Beijing Chemical Works, 99.5%), isopropanol (IPA, Beijing Chemical Works, 99.5%), B(C6F5)3 (J&K Scientific Ltd., Beijing, China, 97%), hexadecyltrimethylammonium bromide (CTAB, J&K Scientific Ltd., 99%), toluene (Beijing Chemical Works, 99.5%), 4-nonylphenyl-polyethylene glycol (NP-40, J&K Scientific Ltd.), NaCl (Beijing Chemical Works, 99%), sodium dodecylbenzenesulfonate (SDBS, J&K Scientific Ltd., 95%), deuterated chloroform (CDCl3, J&K Scientific Ltd., 99.8%), n-hexane (Beijing Chemical Works, 99.5%), and tetrahydrofuran (THF) (J&K Scientific Ltd., 99.9%) were used as received. IBVE (J&K Scientific Ltd., 99.0%), 2-chloroethyl vinyl ether (J&K Scientific Ltd., 97.0%), and n-butyl vinyl ether (J&K Scientific Ltd., 98.0%) were distilled in a nitrogen atmosphere before use.

2.2. States of Suspension and Emulsion

Aqueous suspension and emulsion systems were investigated in this study. For the suspension, high-purity water, NaCl solution, and a mixture of water and toluene or n-hexane were used as polymerization media. Monomer droplets were visible to the naked eye at 150 rpm (mechanical stirring). Organic and water phases were separated rapidly after stopping the mechanical stirrer. For the emulsion, CTAB, NP-40, and SDBS were applied to the media. Phase separation was observed at 0.5 h after stopping the mechanical stirrer (150 rpm). The average particle size ranged from 51 to 59 nm, and the standard deviation ranged from 17 to 20 nm. B(C6F5)3 did not dissolve when it was added to the high-purity water. After adding a small amount of diethyl ether, B(C6F5)3 dissolved and formed a milky solution.

2.3. Polymerizations

2.3.1. Vinyl Ether Cationic Polymerization in Suspension

The polymerizations were implemented in an air atmosphere in the range between −10 °C and 20 °C in glass culture tubes (60 mL). H2O (3 mL), the monomer (1 mL), and an initiator (EtOH, IPA, or CumOH) were added to a reactor, which was then warmed to a predetermined polymerization temperature for 20 min by immersion in an ethanol/water (50/50) bath. In several cases, NaCl, n-hexane, and toluene were added to the recipe. Then, B(C6F5)3 (0.128 g, 2.5 × 10−4 mol), H2O (2 mL), and diethyl ether (5×10−4 mol) were mixed in a beaker in order and warmed to a predetermined polymerization temperature for a sufficient amount of time. Then, the mixture in the beaker was poured into the reactor under mechanical stirring at 150 rpm. The temperature probe (Testo 176T4) was located below the liquid level. After a predetermined time, the suspension media was poured out into excess methanol. The polymers were washed three times with methanol and dried in a vacuum oven at 30 °C.

2.3.2. Vinyl Ether Cationic Polymerization in Emulsion

The polymerizations were implemented under the condition of adding an emulsifier. H2O (3 mL), a surfactant (NP-40, CTAB, or SDBS), monomer (1 mL), and CumOH (0.034 g, 2.5×10−4 mol) were added to a reactor with mechanical stirring at 150 rpm. The reactor was then warmed to a predetermined polymerization temperature for 20 min by immersion in an ethanol/water (50/50) bath. B(C6F5)3 (0.128 g, 2.5 × 10−4 mol), H2O (2 mL, 0.13 M), and diethyl ether (5 × 10−4 mol) were mixed in a beaker in order and warmed to a predetermined polymerization temperature for a sufficient amount of time. The mixture in the beaker was poured afterward into the reactor. Subsequent processing was similar to that for polymerization in an aqueous suspension.

2.4. Measurements

Proton nuclear magnetic resonance (1H-NMR) spectra of the poly(vinyl ether)s were recorded in CDCl3 as solvents at 25 °C on a Bruker-500 MHz spectrometer calibrated with tetramethylsilane as the internal standard (δH = 0.00). Molecular weights and MWD (Mw/Mn) of the poly(vinyl ether)s were obtained from a gel permeation chromatography (GPC) system with universal calibration using a Waters e2695 separations module, a Waters 2489 UV detector, a Waters 2414 RI detector, and four Waters styragel columns connected in the following order: 500, 103, 104, and 105. THF served as a solvent for the polymers with a concentration of 20 mg of polymer/10 mL of THF and mobile phase at a flow rate of 1.0 mL/min. ATR-FTIR spectra were recorded in situ by using a Mettler Toledo ReactIR 15 instrument with a DiComp probe coupled with an Material HgCdTe detector via AgX fiber. Sampling wavenumbers were from 4000 to 600 cm−1 at a resolution of 2 cm−1. The particle size in the emulsion was tested by a dynamic light scattering (DLS) analysis system using a Nanosight LM20. The reaction system temperature was detected with Testo 176T4, a data logger that records temperature per second.

2.5. Computational Method

All the calculations were performed with Gaussian 03 software (Version 6.0, Gaussian Inc., Wallingford, CT, USA). Geometry optimizations and vibrational frequency calculations were carried out via the density functional theory (DFT) BP86: Becke’s 1988 exchange functional [40] with Perdew’s correlation functional [41] using 6-31G∗ basis sets for C, H, O, B, F. This gave the charges of carbocation and the atoms’ distances.

3. Results and Discussion

3.1. Testing of Different Initiators

The reaction between B(C6F5)3 and Et2O were investigated with ATR-FTIR spectroscopy, as shown in Figure 1. When Et2O comes in direct contact with B(C6F5)3, the absorbance at 1091 and 774 cm-1 is changed, which indicates the interaction between B(C6F5)3 and Et2O [42,43,44]. The B(C6F5)3/Et2O complex can react with H2O or alcohols to form an active species, which can initiate polymerization (Table 1). Given that IBVE is one of the most reactive monomers in conventional cationic polymerization [16,37], H2O as an initiator combined with the co-initiator B(C6F5)3 induced rapid cationic polymerization of IBVE in the aqueous suspension in a highly exothermic (even explosive) and non-reproducible manner at 20 °C (run 1 in Table 1). To achieve an efficient and stable polymerization process, we used primary, secondary, and tertiary alcohols as initiators in this study. The maximum temperatures during polymerizations initiated by H2O, EtOH, IPA, and CumOH/B(C6F5)3/Et2O were typically above the boiling point of IBVE (83 °C) (Figure 2). Only CumOH/B(C6F5)3 did not induce the polymerization in an explosive and non-reproducible manner (Table 1). The longest preparation time (18 s) and lowest maximum temperature (98.6 °C) during polymerization initiated by CumOH/B(C6F5)3 indicated that using the CumOH/B(C6F5)3 initiating system was the most stable approach. CumOH had high initiating activity in aqueous media, as proven by the polymerization rates of styrene in the aqueous suspension initiated by H2O, EtOH, IPA, and CumOH/B(C6F5)3 (Figure S1). Because B(C6F5)3 is dissolved in water before it is placed into the reactor, competitive complexing should occur between H2O/B(C6F5)3 and CumOH/B(C6F5)3 initiating systems. DFT was used to study the interactions between the initiator and co-initiator (see Section 3.5 for details). The polymers obtained from the CumOH/B(C6F5)3 initiating system exhibited generally narrower MWDs than did those obtained from other systems (Table 1).

3.2. Polymerization in Aqueous Suspension

3.2.1. Effect of Initiator Concentration

The aqueous cationic polymerization of IBVE was conducted in H2O using B(C6F5)3 combined with different concentrations of CumOH at 20 °C (Figure 3). Because B(C6F5)3 was dissolved in water, the polymerization sites in H2O were on the monomer/water surface. Figure 3 indicates that the IBVE polymerization rate increased slightly with increases in the concentration of CumOH. The highest monomer conversion was only 52% at [CumOH] = 0.15M (Figure 3a), which may be due to the chain-transfer reaction during polymerization. By contrast, the number average molecular weight (Mn) decreased as the concentration of CumOH increased (Figure 3b). The increase of Mn with monomer conversion at the later stage of polymerization was due to a coupling reaction during the later stages of the polymerization (see Section 3.6 for details). The polymers obtained in H2O exhibited broad MWDs, indicating that the suspension polymerization was not controlled. The nonlinear curves of ln([M0]/[M]) versus time (Figure 3c) illustrated that the number of active species in aqueous suspension processes decreased continuously with time.

3.2.2. Effect of Diluents

Given that the polymerization sites in H2O were on the monomer/water surface, we assumed that the use of an organic, hardly water-soluble cosolvent or NaCl solution would dilute the monomer and decrease the reaction exotherm. In the presence of n-hexane, toluene, or NaCl, polymerization in the aqueous suspension proceeded in a reasonable, reproducible manner from −10 °C to 20 °C. The reaction exotherms decreased, and the preparation times during polymerizations increased in these cases (Figure 4). The use of these diluents (n-hexane/H2O, toluene/H2O, or NaCl solution) led to a decline in monomer conversion and Mn, except for the polymerization in H2O at +0 °C (Table 2).
These observations are consistent with the characteristics of interfacial reactions of IBVE polymerizations in aqueous media [37]. The use of co-solvents makes it difficult for B(C6F5)3, which is dissolved in water, to reach the monomer, leading to a low monomer conversion and Mn. In the NaCl solution, the Cl− inhibits the positive charge of the active species [16,17], which results in a decrease in the polymerization rate on the monomer/water surface [45]. The yield and molecular weight of the polymerization in H2O at +0 °C (run 6 in Table 2) were lower than those of the polymerizations in other diluents probably because the high-purity water system was extremely near the freezing point.

3.2.3. Effect of Temperature

To increase the monomer conversion and Mn, the reaction temperature of IBVE polymerization in the aqueous suspension was reduced from 20 °C to −10 °C (Table 2). When the reaction temperature was reduced, the reaction exotherms decreased, and the preparation times increased in all suspension processes. Meanwhile, a trend contrary to traditional cationic polymerizations [1,2,3,46] was observed. The yields and Mn obtained in the aqueous suspension processes decreased when the reaction temperature was lowered. The possible reason for these observations might be the loss of the co-initiator activity when reaction temperature decreases. We also examined styrene polymerization in the aqueous suspension (Figure S2), and the characteristics were fully consistent with those in IBVE polymerization in the aqueous suspension. The loss of initiating activity with decreasing temperature might be the real reason B(C6F5)3 could not induce IB cationic polymerization below −20 °C.

3.2.4. Other Vinyl Ethers

To further understand the vinyl ether polymerization characteristics in suspension, CEVE and n-BVE were used as monomers to conduct polymerization. The cationic polymerizations of CEVE and n-BVE initiated by CumOH/B(C6F5)3/Et2O in aqueous suspensions proceeded in a reproducible manner. The incomplete monomer conversions (<75%) for IBVE (49.32%), CEVE (71.68%), and n-BVE (58.40%) (Figure 3a and Figure 5) cationic polymerizations were observed due to the competition between the propagated consumption of the protonated monomer and the formation of acetaldehyde and other organic compounds, which were analyzed through 1H-NMR spectroscopy. [LZ2] The increase of Mn with monomer conversion at the later stage of polymerization was also observed in CEVE and n-BVE cationic polymerizations.

3.3. Polymerization in Aqueous Emulsions

To better understand the influence of the aqueous environment on vinyl ether cationic polymerization, poly(IBVE), poly(CEVE), and poly(n-BVE) were synthesized in emulsions (using CTAB, SDBS, and NP-40 as cationic, anionic, and non-ionic surfactants, respectively). Only trace amounts of poly(CEVE)s and poly(n-BVE)s were synthesized in the emulsion with SDBS at 20 °C. Compared with the polymerizations implemented in H2O, polymers with lower monomer conversion and Mn were obtained in the emulsion at the same reaction time (Figure 6 and Figure 7). The emulsion polymerization was also not controlled. These observations are different from those of aqueous cationic polymerization using LASC as a catalyst in previous studies [26,27,28,29]. In these studies, a compound made of a lanthanide triflate and a surfactant, that is, a LASC catalyst, transferred the polymerization sites from the monomer/water surface to the interior of the monomer, resulting in the production of long polymer chains. By contrast, the lower yields were observed during emulsion polymerization, probably because the space steric hindrance of these surfactants on the monomer/water surface placed restrictions on the contact between B(C6F5)3/Et2O and the monomer [45]. The lower molecular weights were due to the formation of smaller droplets (average 51–59 nm) in case of emulsion polymerization. Consequently, the polymerization sites were still on the monomer/water surface. The reaction exotherms decreased, and the preparation times during polymerizations increased in the emulsion processes in comparison with those in the high-purity water (Figure S3). In the emulsion with SDBS as an anionic surfactant, mass anions inhibited the positive charge of the active species on the monomer/water surface [45]. Although NP-40 and CTAB are non-ionic and cationic surfactants, the space steric hindrance still suppressed the monomer conversion.

3.4. Polymer Characterization

The terminal structures of poly(IBVE), poly(CEVE), and poly(n-BVE) obtained in aqueous suspensions and emulsions were examined by 1H-NMR spectroscopy (Figure 8). The characteristic signals at 0.90 (peak g), 1.60 (peak f), 1.79 (peak c), 3.17 (peak e), and 3.56 (peak d) ppm were assigned to the main chain protons of the monomer unit of poly(IBVE). The characteristic signals at 1.00–2.09 (peak c) and 3.4–4.00 (peaks d, e, s) ppm were assigned to the main chain protons of the monomer unit of poly(CEVE). The characteristic signals at 0.90 (peak g), 1.10–1.75 (peaks c, u, v), and 3.25–4.00 (peaks d, e) ppm were assigned to the main chain protons of the monomer unit of poly(n-BVE). The signals at 1.11 (peak a) and 7.00–7.20 (peak b) ppm were assigned to –CH3 and the phenyl group at the α-end (Figure 8), respectively. The signals at 2.52 (peak j), 5.35 (peak i), and 5.60 (peak h) ppm were attributed to the mid-chain (internal) olefin group formed due to chain transfer to the polymer [22]. In addition, the following three types of ω-end groups were examined in the 1H-NMR spectra (Figure 8): acetal (resonance at 4.73 ppm (peak q)), aldehyde (resonances at 2.49 (peak p), and 9.81 (peak t) ppm, respectively) and alkenal (resonances at 6.09 (peak n), 6.90 (peak m), and 9.54 (peak k) ppm, respectively).
The content of the ω-end and mid-chain (internal) olefin groups of polymers initiated by CumOH/B(C6F5)3/Et2O in aqueous media is presented in Table 3. For polymerization in the emulsion, the content of mid-chain olefin groups (0.1–0.2 double bonds per polymer chain) was present in minor amounts. β-H elimination, a typical chain-transfer reaction for conventional cationic polymerization of vinyl ethers [16,47] leading terminal double-bond groups, was not observed in the 1H-NMR spectra of the polymers synthesized in aqueous media. A possible reason was that these reactive terminal double-bond groups were consumed in chain coupling reactions [37], which is one reason the total content of the ω-end groups was lower than 100% (Table 3). Another reason is that a small extent of polymerization was initiated by H2O/B(C6F5)3/Et2O. The chain coupling reaction led to an overestimation of the phenyl head group content (see Section 3.6 for details).

3.5. Possible Interactions Between the Initiator and Co-initiator

Given that H2O, EtOH, IPA, and CumOH could induce the aqueous cationic polymerization of vinyl ethers, DFT was applied to investigate the competition between H2O and alcohol combined with B(C6F5)3 for providing a theoretical basis. Models of active center were built at the 6-31G* level, such as H+–B(C6F5)3–OH−, CH3CH2+–B(C6F5)3–OH−, (CH3)2CH+–B(C6F5)3–OH−, and (CH3)2C(C6H5)+–B(C6F5)3–OH−. The strain energy was minimized through structural optimization in bond angles and lengths. The activation energy required to form H+–B(C6F5)3–OH− active center was the most in all these four ion pair models (Figure 9), which indicated that B(C6F5)3 was more readily formed in an active center with alcohols when alcohols were present in the aqueous media. The C+…B distance in (CH3)2C(C6H5)+–B(C6F5)3–OH− (3.99 Å) was the shortest in all the models of active center formed by alcohols and B(C6F5)3. Furthermore, the models of (CH3)2C(C6H5)+–B(C6F5)3–OH− presented a large steric hindrance, indicating that the propagating carbocation with the CumOH/B(C6F5)3 initiating system was much more sterically hindered, such that more restriction occurred in the direction of the insertion of monomer molecules into the propagating carbocation. Therefore, the polymerization initiated by CumOH/B(C6F5)3 was stable.

3.6. Proposed Mechanism for Polymerization

The polymerization (initiation, propagation, and termination) sites were on the monomer/water surface for the aqueous cationic polymerization of vinyl ether initiated by B(C6F5)3/Et2O, similar to the aqueous cationic polymerization of styrene derivatives [45,48,49]. However, the polymerization processes shared three special features in comparison with the cationic polymerization of other monomers initiated by other co-initiators. The first feature was the severely exothermic nature and poor reproducibility of vinyl ether polymerization due to the high reactivity of this monomer. To overcome this disadvantage, different initiators, co-solvents (n-hexane and toluene), NaCl solutions, and surfactants were added to the experiments. CumOH/B(C6F5)3/Et2O induced polymerization in a reproducible manner in the suspension and emulsion. The second feature was about the decrease in monomer conversion and Mn when the reaction temperature was reduced using B(C6F5)3 as a co-initiator; this process was contrary to traditional cationic polymerizations [1,2,3,46]. The third feature was that low yields and Mn were obtained in n-hexane/H2O, toluene/H2O, NaCl solution, and emulsion in comparison with high-purity water; this process was opposite to the aqueous cationic polymerizations using other co-initiators [26,27,28,37].
According to the experimental data, a mechanism for the aqueous cationic polymerization of vinyl ether was proposed (Scheme 1). In the initiation, B(C6F5)3/Et2O captured a hydroxyl group from CumOH to form the (CH3)2C(C6H5)+–Et2OB(C6F5)3–OH− active center (structure A). The structure A then initiated the polymerization, and the propagation was extremely fast until chain-transfer reactions or termination occurred. The chain-transfers via β-H elimination formed a terminal double-bond group that was highly reactive [37,50]. This terminal olefin group readily reacted with structure A, thereby forming coupled chains that resulted in polymers with two head groups (structure B) [35,51]. The chain-transfers by the monomer generated an acetal end group (structure C) [22]. The chain-transfers by water generated an hydroxyl end group (structure D), but the low stability of hemiacetal for poly(vinyl ether)s led to hydroxyl end group (structure D) conversion into an aldehyde end group (structure E) or acetal end group (structure C). The aldehyde end group lost ROH to form an alkenal end group (structure F) [37]. In addition, only trace amounts (Table 3) of mid-chain olefin groups (structure G) were detected in the aqueous polymerization due to chain-transfer to the polymer [35], which was a typical side reaction in the conventional cationic polymerization of vinyl ethers.

4. Conclusions

Poly(IBVE)s, poly(CEVE)s, and poly(n-BVE)s were successfully achieved in aqueous suspensions and emulsions using B(C6F5)3/Et2O as a co-initiator and alcohols as an initiator in a reproducible manner. Polymerization characteristics were systematically tested and compared in the suspension and emulsion. Adding co-solvents (n-hexane and toluene), NaCl, and surfactants could transfer heat effectively in the reaction. However, low yields and molecular weights were obtained in comparison with high-purity water. The polymerization rate surprisingly decreased when the temperature was lowered; this result was opposite to that in traditional cationic polymerizations. The aqueous cationic polymerization sites were located on the monomer/water surface. The end group structures of polymers examined by 1H-NMR spectroscopy indicated that various chain-transfer reactions (to monomers, water, and polymers) occurred in these processes. Accordingly, the mechanism for the aqueous cationic polymerization of vinyl ethers using CumOH/B(C6F5)3/Et2O was proposed.

Supplementary Materials

The following are available online at https://0-www-mdpi-com.brum.beds.ac.uk/2073-4360/11/3/500/s1, Figure S1: Suspension polymerization of styrene at 20 °C: (a) conversion vs time; (b) ln[M0]/[M] vs time. [St] = 1.75 M; [B(C6F5)3] = 0.05 M.; Figure S2: Styrene conversion at different polymerization temperatures initiated by CumOH/B(C6F5)3 in aqueous suspension for 50 h. [St] = 1.75 M; [CumOH] = [B(C6F5)3] = 0.05 M; NaCl: 1 g.; and Figure S3: Temperature during cationic polymerizations initiated by CumOH/B(C6F5)3 in aqueous emulsion at 20 °C. [IBVE] = 1.6 M; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; CTAB = 0.02 g; NP-40 = 0.02 g; SDBS = 0.02 g.

Author Contributions

J.Z. and Y.W. conceived and designed the experiments; J.Z. and K.C. performed the experiments; J.Z. and Y.W. analyzed the data; Y.W., S.L. and W.G. contributed resources and supervision; M.Z. and D.Y. contributed methodology; L.G. contributed molecular calculations; J.Z. wrote the paper.

Funding

This research was funded by the National Natural Science Foundation of China (No.51573020), Beijing Natural Science Foundation (No. 2172022), Scientific Research Project of Beijing Educational Committee (KM201810017008), Project of Petrochina (No. PRIKY17041), and URT Program (No. 2018J00029).

Conflicts of Interest

The authors declare no conflicts of interest.

References

  1. Rajasekhar, T.; Emert, J.; Wolf, L.M.; Faust, R. Controlled catalytic chain transfer polymerization of isobutylene in the presence of tert-butanol as exp-enhancer. Macromolecules 2018, 51, 3041–3049. [Google Scholar] [CrossRef]
  2. Hadjikyriacou, S.; Faust, R. Amphiphilic block copolymers by sequential living cationic polymerization: Synthesis and characterization of poly(isobutylene-b-methyl vinyl ether). Macromolecules 1996, 29, 5261–5267. [Google Scholar] [CrossRef]
  3. Kanazawa, A.; Kanaoka, S.; Aoshima, S. Living cationic polymerization of vinyl ether with methanol/metal chloride initiating system: Relationship between polymerization behavior and the nature of Lewis acids. Macromolecules 2010, 43, 2739–2747. [Google Scholar] [CrossRef]
  4. Kanazawa, A.; Kanaoka, S.; Aoshima, S. Heterogeneously catalyzed living cationic polymerization of isobutyl vinyl ether using iron(III) oxode. J. Am. Chem. Soc. 2007, 129, 2420–2421. [Google Scholar] [CrossRef] [PubMed]
  5. Aoshima, S.; Kanaoka, S. A renaissance in living cationic polymerization. Chem. Rev. 2009, 109, 5245–5287. [Google Scholar] [CrossRef]
  6. De, P.; Faust, R. Living carbocationic polymerization of p-methoxystyrene using p- methoxystyrene hydrochloride/SnBr4 initiating system: Determination of the absolute rate constant of propagation for ion pairs. Macromolecules 2004, 37, 7930–7937. [Google Scholar] [CrossRef]
  7. Wu, Y.; Ren, P.; Guo, W.; Li, S.; Yang, X.; Shang, Y. Living cationic sequential block copolymerization: Synthesis and characterization of poly(4-(2-hydroxyethyl)styrene-b-isobutylene-b-4-(2-hydroxyethyl)styrene)triblock copolymers. Polym. J. 2010, 42, 268–272. [Google Scholar] [CrossRef]
  8. Zhang, L.; Wu, Y.; Li, S.; Mao, J.; Guo, W.; Chang, J.; Zhang, T.; Wu, S. Synthesis of branched butyl rubber with bimodal distribution by cationic polymerization and its structures and properties. Acta Polym. Sin. 2015, 9, 1028–1035. [Google Scholar]
  9. Anastas, P.T.; Kirchhoff, M.M. Origins, current status, and future challenges of green chemistry. Acc. Chem. Res. 2002, 35, 686–694. [Google Scholar] [CrossRef]
  10. Horváth, I.T.; Anastas, P.T. Innovations and green chemistry. Chem. Rev. 2007, 107, 2169–2173. [Google Scholar] [CrossRef]
  11. Kostjuk, S.V.; Vasilenko, I.V.; Shiman, D.I.; Frolov, A.N.; Gaponik, L.V. Highly reactive polyisobutylenes via cationic polymerization of isobutylene by AlCl3/Ether complexes in non-polar media: Scope and limitations. Macromol. Symp. 2015, 349, 94–103. [Google Scholar] [CrossRef]
  12. Vasilenko, I.V.; Shiman, D.I.; Kostjuk, S.V. Highly reactive polyisobutylenes via AlCl3OBu2-coinitiated cationic polymerization of isobutylene: Effect of solvent polarity, temperature, and initiator. J. Polym. Sci. Part A Polym. Chem. 2012, 50, 750–758. [Google Scholar] [CrossRef]
  13. Xie, Y.; Chang, J.; Wu, Y.; Yang, D.; Wang, H.; Zhang, T.; Li, S.; Guo, W. Synthesis and properties of bromide-functionalized poly(isobutylene-co-p-methylstyrene) random copolymer. Polym. Int. 2017, 66, 468–476. [Google Scholar] [CrossRef]
  14. Mingotaud, A.F.; Cansell, F.; Gilbert, N.; Soum, A. Cationic and anionic ring-opening polymerization in supercritical CO2 preliminary results. Polym. J. 1999, 153, 77–86. [Google Scholar] [CrossRef]
  15. Clark, M.R.; Desimone, J.M. Cationic polymerization of vinyl and cyclic ethers in supercritical and liquid carbon dioxide. Macromolecules 1995, 28, 3002–3004. [Google Scholar] [CrossRef]
  16. Wu, Y.; Han, L.; Zhang, X.; Mao, J.; Gong, L.; Guo, W.; Gi, K.; Li, S. Cationic polymerization of isobutyl vinyl ether in an imidazole-based ionic liquid: Characteristics and mechanism. Polym. Chem. 2015, 6, 2560–2568. [Google Scholar] [CrossRef]
  17. Zhang, X.; Guo, W.; Wu, Y.; Gong, L.; Li, W.; Li, X.; Li, S.; Shang, Y.; Yang, D.; Wang, H. Cationic polymerization of p-methylstyrene in selected ionic liquids and polymerization mechanism. Polym. Chem. 2016, 7, 5099–5112. [Google Scholar] [CrossRef]
  18. Zhang, X.; Guo, W.; Wu, Y.; Li, W.; Li, S.; Shang, Y.; Zhang, J. Solubility of monomers for chain polymerization in ionic liquids predicted by the conductor-like screening model for real solvents. Ind. Eng. Chem. Res. 2017, 56, 14694–14703. [Google Scholar] [CrossRef]
  19. Han, L.; Wu, Y.; Dan, Y.; Wang, H.; Zhang, X.; Wei, X.; Guo, W.; Li, S. Characteristics and mechanism of styrene cationic polymerization in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid. RSC Adv. 2016, 6, 105322–105330. [Google Scholar] [CrossRef]
  20. Zhang, X.; Guo, W.; Wu, Y.; Shang, Y.; Li, S.; Xiong, W. Synthesis of random copolymer of isobutylene with p-methylstyrene by cationic polymerization in ionic liquids. E-polymers 2018, 18, 423–431. [Google Scholar] [CrossRef]
  21. Kostjuk, S.V.; Ganachaud, F. Cationic polymerization of vinyl monomers in aqueous media: From monofunctional oligomers to long-lived polymer chains. Acc. Chem. Res. 2010, 43, 357–367. [Google Scholar] [CrossRef] [PubMed]
  22. Huang, Q.; Wu, Y.; Dan, J. Cationic polymerization of isobutyl vinyl ether coinitiated with heteropolyacid or its salts in aqueous medium. J. Polym. Sci. Part A Polym. Chem. 2013, 51, 546–556. [Google Scholar] [CrossRef]
  23. Satoh, K.; Kamigaito, A.M.; Sawamoto, M. Controlled cationic polymerization of p-methoxystyrene in aqueous media with Yb(OTf)3. Macromolecules 1999, 32, 3827–3832. [Google Scholar] [CrossRef]
  24. Satoh, K.; Kamigaito, A.M.; Sawamoto, M. Direct living cationic polymerization of p-hydroxystyrene with boron trifluoride etherate in the presence of water. Macromolecules 2000, 33, 5405–5410. [Google Scholar] [CrossRef]
  25. Satoh, K.; Kamigaito, A.M.; Sawamoto, M. Metal triflates and tetrafluoroborates as water-tolerant Lewis Acids for cationic polymerization in aqueous media. Macromolecules 2000, 33, 5836–5840. [Google Scholar] [CrossRef]
  26. Touchard, V.; Graillat, C.; Boisson, C.; D’Agosto, A.F.; Spitz, R. Use of a Lewis Acid surfactant combined catalyst in cationic polymerization in miniemulsion apparent and hidden initiators. Macromolecules 2004, 37, 3136–3142. [Google Scholar] [CrossRef]
  27. Vasilenko, I.V.; Yeong, H.Y.; Delgado, M.; Ouardad, S.; Peruch, F.; Voit, B.; Ganachaud, F.; Kostjuk, S.V. A catalyst platform for unique cationic (co)polymerizationin aqueous emulsion. Angew. Chem. Int. Ed. 2015, 54, 12728–12732. [Google Scholar] [CrossRef]
  28. Vasilenko, I.V.; Ganachaud, F.; Kostjuk, S.V. New insights into the cationic polymerization in emulsion catalyzed by water-dispersible Lewis Acid surfactant complexes: A case study with p-methoxystyrene. Macromolecules 2016, 49, 3264–3273. [Google Scholar] [CrossRef]
  29. Cauvin, S.; Ganachaud, F.; Moreau, M.; Hémery, P. High molar mass polymers by cationic polymerisation in emulsion and miniemulsion. Chem. Commun. 2005, 21, 2713–2715. [Google Scholar] [CrossRef]
  30. Satoh, K.; Nakashima, J.; Kamigaito, M.; Sawamoto, M. Novel BF3OEt2/R-OH initiating system for controlled cationic polymerization of styrene in the presence of water. Macromolecules 2001, 34, 396–401. [Google Scholar] [CrossRef]
  31. Radchenko, A.V.; Kostjuk, S.V.; Vasilenko, I.V.; Ganachaud, F.; Kaputsky, F.N. Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations. Eur. Polym. J. 2007, 43, 2576–2583. [Google Scholar] [CrossRef]
  32. Kostjuk, S.V.; Ganachaud, F. Cationic polymerization of styrene in solution and aqueous suspension using B(C6F5)3 as a water-tolerant Lewis Acid. Macromolecules 2006, 39, 3110–3113. [Google Scholar] [CrossRef]
  33. Kostjuk, S.V.; Ganachaud, F.; Radchenko, A.V.; Vasilenko, I.V. Cationic polymerization of styrene derivatives and cyclopentadiene catalyzed by B(C6F5)3 in aqueous media: Comparison of suspension, emulsion and dispersion processes. Macromol. Symp. 2011, 308, 1–7. [Google Scholar] [CrossRef]
  34. Kostjuk, S.V.; Radchenko, A.V.; Ganachaud, F. Controlled cationic polymerization of cyclopentadiene with B(C6F5)3 as a coinitiator in the presence of water. J. Polym. Sci. Part A Polym. Chem. 2008, 46, 4734–4747. [Google Scholar] [CrossRef]
  35. Kostjuk, S.V.; Ouardad, S.; Peruch, F.; Deffieux, A.; Absalon, C.; Puskas, J.E.; Ganachaud, F. Carbocationic polymerization of isoprene co-initiated by B(C6F5)3: An alternative route toward natural rubber polymer analogues? Macromolecules 2011, 44, 1372–1384. [Google Scholar] [CrossRef]
  36. Mathers, R.T.; Lewis, S.P. Aqueous cationic olefin polymerization using tris(pentafluorophenyl)gallium and aluminum. J. Polym. Sci. Part A Polym. Chem. 2012, 50, 1325–1332. [Google Scholar] [CrossRef]
  37. Radchenko, A.V.; Kostjuk, S.V.; Ganachaud, F. Cationic polymerization of isobutyl vinyl ether in aqueous media: Physical chemistry tricks to fight against thermal runaway. Polym. Chem. 2013, 4, 1883–1892. [Google Scholar] [CrossRef]
  38. Lewis, S.P.; Henderson, L.D.; Chandler, B.D.; Parvez, M.; Piers, W.E.; Collins, S. Aqueous suspension polymerization of isobutene initiated by 1,2-C6F4[B(C6F5)2]2. J. Am. Chem. Soc. 2005, 127, 46–47. [Google Scholar] [CrossRef]
  39. Lewis, S.P.; Chai, J.; Collins, S. Isobutene polymerization using chelating diboranes: Polymerization in aqueous suspension and hydrocarbon solution. Organometallics 2009, 28, 249–263. [Google Scholar] [CrossRef]
  40. Becke, A.D. Density-functional exchange-energy approximation with correct asymptotic behavior. Phys. Rev. A At. Mol. Opt. Phys. 1988, 38, 3098–3100. [Google Scholar] [CrossRef]
  41. Perdew, J.P. Density-functional approximation for the correlation energy of the inhomogeneous electron gas. Phys. Rev. B Condens. Matter 1986, 33, 8822–8824. [Google Scholar] [CrossRef] [PubMed]
  42. Kumar, R.; Dimitrov, P.; Bartelson, K.J.; Emert, J.; Faust, R. Polymerization of isobutylene by GaCl3 or FeCl3/ether complexes in nonpolar solvents. Macromolecules 2012, 45, 8598–8603. [Google Scholar] [CrossRef]
  43. Liu, Q.; Wu, Y.; Yan, P.; Zhang, Y.; Xu, R. Polyisobutylene with high exo-olefin content via β-H elimination in the cationic polymerization of isobutylene with H2O/FeCl3/dialkyl ether initiating system. Macromolecules 2011, 44, 1866–1875. [Google Scholar] [CrossRef]
  44. Zhu, S.; Wang, K.; Lu, Y. Effects of ether on the cationic polymerization of isobutylene catalyzed by AlCl3. ACS Omega 2018, 3, 2033–2039. [Google Scholar] [CrossRef]
  45. Zhang, J.; Wu, Y.; Li, X.; Yang, D.; Zhang, M.; Wang, H.; Shang, Y.; Ren, P.; Mu, X.; Li, S.; et al. Characteristics and mechanism of styrene cationic polymerization in aqueous media initiated by cumyl alcohol/B(C6F5)3. Macromol. Chem. Phys. 2019, 220. [Google Scholar] [CrossRef]
  46. Sipos, L.; De, P.; Faust, R. Effect of temperature, solvent polarity, and nature of Lewis Acid on the rate constants in the carbocationic polymerization of isobutylene. Macromolecules 2003, 36, 8282–8290. [Google Scholar] [CrossRef]
  47. Sawamoto, M. Modern cationic vinyl polymerization. Prog. Polym. Sci. 1991, 16, 111–172. [Google Scholar] [CrossRef]
  48. Kostjuk, S.V.; Radchenko, A.V.; Ganachaud, F. Controlled living cationic polymerization of p-methoxystyrene in solution and aqueous dispersion using tris(pentafluorophenyl)borane as a Lewis Acid acetonitrile does the Job. Macromolecules 2007, 40, 482–490. [Google Scholar] [CrossRef]
  49. Fuji, Y.; Ando, T.; Kamigaito, M.; Sawamoto, M. Iron-catalyzed suspension living radical polymerizations of acrylates and styrene in water. Macromolecules 2002, 35, 2949–2954. [Google Scholar] [CrossRef]
  50. Vasilenko, I.V.; Frolov, A.N.; Kostjul, S.V. Cationic polymerization of isobutylene using AlCl3OBu2 as a coinitiator: Synthesis of highly reactive polyisobutylene. Macromolecules 2010, 43, 5503–5507. [Google Scholar] [CrossRef]
  51. Ouardad, S.; Deffieux, A.; Peruch, F. Polyisoprene synthesized via cationic polymerization: State of the art. Pure Appl. Chem. 2012, 84, 2065–2080. [Google Scholar] [CrossRef]
Polymers 11 00500 g001 550
Figure 1. ATR-FTIR spectra for the interaction between B(C6F5)3 and Et2O at 20 °C. [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Figure 1. ATR-FTIR spectra for the interaction between B(C6F5)3 and Et2O at 20 °C. [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Polymers 11 00500 g001
Polymers 11 00500 g002 550
Figure 2. Temperature during cationic polymerizations of vinyl ethers initiated by different alcohols/B(C6F5)3/Et2O in aqueous suspensions at 20 °C: [IBVE] = 1.6 M; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [EtOH] = [IPA] = [CumOH] = 0.05 M; [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M. CEVE: 2-chloroethyl vinyl ether; n-BVE: n-butyl vinyl ether; IPA: isopropanol.
Figure 2. Temperature during cationic polymerizations of vinyl ethers initiated by different alcohols/B(C6F5)3/Et2O in aqueous suspensions at 20 °C: [IBVE] = 1.6 M; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [EtOH] = [IPA] = [CumOH] = 0.05 M; [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M. CEVE: 2-chloroethyl vinyl ether; n-BVE: n-butyl vinyl ether; IPA: isopropanol.
Polymers 11 00500 g002
Polymers 11 00500 g003 550
Figure 3. IBVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in H2O at 20 °C: (a) conversion vs time; (b) Mn and Mw/Mn vs conversion; (c) ln[M0]/[M] vs time. [IBVE] = 1.6 M; [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Figure 3. IBVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in H2O at 20 °C: (a) conversion vs time; (b) Mn and Mw/Mn vs conversion; (c) ln[M0]/[M] vs time. [IBVE] = 1.6 M; [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Polymers 11 00500 g003
Polymers 11 00500 g004 550
Figure 4. Temperature during IBVE cationic polymerizations initiated by CumOH/B(C6F5)3/Et2O in an aqueous suspension: toluene: 1 mL; NaCl: 1 g; [IBVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Figure 4. Temperature during IBVE cationic polymerizations initiated by CumOH/B(C6F5)3/Et2O in an aqueous suspension: toluene: 1 mL; NaCl: 1 g; [IBVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Polymers 11 00500 g004
Polymers 11 00500 g005 550
Figure 5. Cationic polymerization of CEVE and n-BVE initiated by CumOH/B(C6F5)3/Et2O in H2O at 20 °C: (a) conversion vs time; (b) Mn and Mw/Mn vs conversion; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Figure 5. Cationic polymerization of CEVE and n-BVE initiated by CumOH/B(C6F5)3/Et2O in H2O at 20 °C: (a) conversion vs time; (b) Mn and Mw/Mn vs conversion; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M.
Polymers 11 00500 g005
Polymers 11 00500 g006 550
Figure 6. IBVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in emulsion at 20 °C: (a) conversion vs. time; (b) Mn and Mw/Mn vs. conversion; [IBVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M; CTAB = 0.02 g; NP-40 = 0.02 g; SDBS = 0.02 g.
Figure 6. IBVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in emulsion at 20 °C: (a) conversion vs. time; (b) Mn and Mw/Mn vs. conversion; [IBVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M; CTAB = 0.02 g; NP-40 = 0.02 g; SDBS = 0.02 g.
Polymers 11 00500 g006
Polymers 11 00500 g007 550
Figure 7. CEVE and n-BVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in an emulsion at 20 °C: (a) conversion vs. time; (b) Mn and Mw/Mn vs. conversion; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M; CTAB = 0.02 g; NP-40 = 0.02 g.
Figure 7. CEVE and n-BVE cationic polymerization initiated by CumOH/B(C6F5)3/Et2O in an emulsion at 20 °C: (a) conversion vs. time; (b) Mn and Mw/Mn vs. conversion; [CEVE] = 2.0 M; [n-BVE] = 1.6 M; [CumOH] = [B(C6F5)3] = 0.05 M; [Et2O] = 0.1 M; CTAB = 0.02 g; NP-40 = 0.02 g.
Polymers 11 00500 g007
Polymers 11 00500 g008 550
Figure 8. 1H-NMR spectra of poly(IBVE), poly(CEVE), and poly(n-BVE) initiated by CumOH/B(C6F5)3/Et2O in aqueous media.
Figure 8. 1H-NMR spectra of poly(IBVE), poly(CEVE), and poly(n-BVE) initiated by CumOH/B(C6F5)3/Et2O in aqueous media.
Polymers 11 00500 g008
Polymers 11 00500 g009 550
Figure 9. The optimized conformations of H+–B(C6F5)3–OH−, CH3CH2+–B(C6F5)3–OH−, (CH3)2CH+–B(C6F5)3–OH− and (CH3)2C(C6H5)+–B(C6F5)3–OH− at the 6-31G* level.
Figure 9. The optimized conformations of H+–B(C6F5)3–OH−, CH3CH2+–B(C6F5)3–OH−, (CH3)2CH+–B(C6F5)3–OH− and (CH3)2C(C6H5)+–B(C6F5)3–OH− at the 6-31G* level.
Polymers 11 00500 g009
Polymers 11 00500 sch001 550
Scheme 1. Proposed mechanism for the aqueous cationic polymerization of vinyl ethers using CumOH/B(C6F5)3/Et2O.
Scheme 1. Proposed mechanism for the aqueous cationic polymerization of vinyl ethers using CumOH/B(C6F5)3/Et2O.
Polymers 11 00500 sch001
Table
Table 1. Suspension cationic polymerization of isobutyl vinyl ether (IBVE) in the presence of different initiators a.
Table 1. Suspension cationic polymerization of isobutyl vinyl ether (IBVE) in the presence of different initiators a.
runInitiator (content) (mmol)Conv.b (±S) (%)Mnc (GPC) (g mol−1)Mw/Mnc
1H2O (∞)30.1 (±15.4)46901.88
2EtOH (0.25)45.2 (±15.6)43102.01
3IPA (0.25)43.3 (±7.7)59401.57
4CumOH (0.25)48.3 (±1.6)62701.39
a Polymerization conditions: H2O (total): 5 mL; IBVE: 1 mL; B(C6F5)3: 0.25 mmol; T = 20 °C; mechanically stirring at 150 rpm. b Conversion value came from the average of 5 experimental runs with each initiator along with the respective standard deviation. c Mn and Mw/Mn value came from the polymer of which conversion was closest to the averages of each group.
Table
Table 2. Suspension cationic polymerization of IBVE at different temperatures a.
Table 2. Suspension cationic polymerization of IBVE at different temperatures a.
RunMediumT (°C)Time (min)Conv. (%)Mn (GPC) (g mol−1)Mw/Mn
5H2O 20548.965001.39
6H2O01027.450201.41
7n-hexane/H2O201744.248101.32
8n-hexane/H2O02140.746901.28
9n-hexane/H2O−52724.744101.36
10Toluene/H2O201742.646101.37
11Toluene/H2O02135.145501.40
12Toluene/H2O−52722.740901.32
13NaCl solution b201537.348001.36
14NaCl solution b02728.730401.42
15NaCl solution b−104723.021201.31
a Polymerization conditions: H2O (total): 5 mL; n-hexane: 1 mL; toluene: 1 mL; IBVE: 1 mL; B(C6F5)3: 0.25 mmol; CumOH: 0.25 mmol; mechanically stirring at 150 rpm. b NaCl: 1 g.
Table
Table 3. Functionality at the ω-end and mid-chain (internal) olefin group content of polymers initiated by CumOH/B(C6F5)3 at 20 °C in aqueous media.a
Table 3. Functionality at the ω-end and mid-chain (internal) olefin group content of polymers initiated by CumOH/B(C6F5)3 at 20 °C in aqueous media.a
runMediaAcetal b (%)Aldehyde b (%)Alkenal b (%)Internal olefin c (per chain)
16H2O31.831.526.70.4
17n-hexane/H2O28.235.128.70.3
18Toluene/H2O27.036.027.00.4
19NaCl solution17.046.130.00.5
20CTAB27.939.623.50.1
21NP-4028.833.427.90.2
22SDBS39.834.819.50.1
23 dH2O33.820.63.20.4
24 eH2O11.741.638.60.8
a IBVE Polymerization conditions, see Table 2. b Calculated by 1H-NMR spectroscopy as acetal [5I(q)/I(b)], aldehyde [5I(t)/I(b)], and alkenal [5I(k)/I(b)]. c Calculated as the ratio of integrals (normalized to one hydrogen) as 5I(i)/I(b). d CEVE polymerization, [CEVE] = 2.0M. e n-BVE polymerization, [n-BVE] = 1.6 M.

Share and Cite

MDPI and ACS Style

Zhang, J.; Wu, Y.; Chen, K.; Zhang, M.; Gong, L.; Yang, D.; Li, S.; Guo, W. Characteristics and Mechanism of Vinyl Ether Cationic Polymerization in Aqueous Media Initiated by Alcohol/B(C6F5)3/Et2O. Polymers 2019, 11, 500. https://0-doi-org.brum.beds.ac.uk/10.3390/polym11030500

AMA Style

Zhang J, Wu Y, Chen K, Zhang M, Gong L, Yang D, Li S, Guo W. Characteristics and Mechanism of Vinyl Ether Cationic Polymerization in Aqueous Media Initiated by Alcohol/B(C6F5)3/Et2O. Polymers. 2019; 11(3):500. https://0-doi-org.brum.beds.ac.uk/10.3390/polym11030500

Chicago/Turabian Style

Zhang, Jinghan, Yibo Wu, Kaixuan Chen, Min Zhang, Liangfa Gong, Dan Yang, Shuxin Li, and Wenli Guo. 2019. "Characteristics and Mechanism of Vinyl Ether Cationic Polymerization in Aqueous Media Initiated by Alcohol/B(C6F5)3/Et2O" Polymers 11, no. 3: 500. https://0-doi-org.brum.beds.ac.uk/10.3390/polym11030500

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop