Next Article in Journal
Enhancement of Bacterial Anti-Adhesion Properties on Robust PDMS Micro-Structure Using a Simple Flame Treatment Method
Next Article in Special Issue
A Theoretical Study of Fe Adsorbed on Pure and Nonmetal (N, F, P, S, Cl)-Doped Ti3C2O2 for Electrocatalytic Nitrogen Reduction
Previous Article in Journal
Numerical Simulation of Temperature Variations during the Application of Safety Protocols in Magnetic Particle Hyperthermia
Previous Article in Special Issue
A Stretchable and Self-Healing Hybrid Nano-Generator for Human Motion Monitoring
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 12
Issue 3
10.3390/nano12030556
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Theoretical Study on the Electronic Structure and Magnetic Properties Regulation of Janus Structure of M’MCO2 2D MXenes

by
Panpan Gao
1,2,
Minhui Song
1,
Xiaoxu Wang
1,
Qing Liu
1,2,3,
Shizhen He
1,
Ye Su
1,* and
Ping Qian
1,2,*
1
Beijing Advanced Innovation Center for Materials Genome Engineering, University of Science and Technology Beijing, Beijing 100083, China
2
School of Mathematics and Physics, University of Science and Technology Beijing, Beijing 100083, China
3
Department of Physics, National University of Singapore, Singapore 117551, Singapore
*
Authors to whom correspondence should be addressed.
Nanomaterials 2022, 12(3), 556; https://0-doi-org.brum.beds.ac.uk/10.3390/nano12030556
Submission received: 8 January 2022 / Revised: 28 January 2022 / Accepted: 2 February 2022 / Published: 6 February 2022
(This article belongs to the Special Issue Advanced Nanomaterials for Electrochemical Energy Conversion and Storage)
Browse Figures
Review Reports Versions Notes

Abstract

:
Motivated by the recent successful synthesis of Janus monolayer of transition metal (TM) dichalcogenides, MXenes with Janus structures are worthy of further study, concerning its electronic structure and magnetic properties. Here, we study the effect of different transition metal atoms on the structure stability and magnetic and electronic properties of M’MCO2 (M’ and M = V, Cr and Mn). The result shows the output magnetic moment is contributed mainly by the d orbitals of the V, Cr, and Mn atoms. The total magnetic moments of ferromagnetic (FM) configuration and antiferromagnetic (AFM) configuration are affected by coupling types. FM has a large magnetic moment output, while the total magnetic moments of AFM2’s (intralayer AFM/interlayer FM) configuration and AFM3’s (interlayer AFM/intralayer AFM) configuration are close to 0. The band gap widths of VCrCO2, VMnCO2, CrMnCO2, V2CO2, and Cr2CO2 are no more than 0.02 eV, showing metallic properties, while Mn2CO2 is a semiconductor with a 0.7071 eV band gap width. Janus MXenes can regulate the size of band gap, magnetic ground state, and output net magnetic moment. This work achieves the control of the magnetic properties of the available 2D materials, and provides theoretical guidance for the extensive design of novel Janus MXene materials.

1. Introduction

Over the past decade, the two-dimensional (2D) materials have received significant interest since the discovery of graphene [1,2,3]. Compared with bulk materials, more atoms on the surface of 2D materials are exposed, which is caused by reduced dimensionality. This improves the utilization rates of atoms and makes regulation of band structure and electronic properties easier, thus enabling MXenes to exhibit novel physical and chemical properties [4,5,6]. Recently, a new family of 2D transition metal (TM) carbides and nitrides, MXenes, has received more and more attention [7,8]. MXenes have the general formula Mn+1XnTx, where M stands for early TM, X represents C or N, Tx indicates the surface functional groups O, OH, or F, and n = 1, 2, or 3 [9,10]. Usually, MXenes are synthesized by selective etching A layers (A is an element from the A-group 13 or 14) in the MAX phase, using hydrofluoric acid (HF) solutions [11,12,13]. Sue to their excellent electrical [14], optical [15,16,17,18], and mechanical properties [19], MXenes have been widely applied in electronic devices [20], catalysis [21,22,23,24], magnetic storage [25], energy conversion, and storage systems [26,27,28]. Thus far, more than 30 kinds of MXenes have been synthesized in experiments, and more kinds of materials have been theoretically predicted [29,30].
The electronic and optical properties of MXenes with symmetrical configuration have been extensively studied. Previous theoretical investigations have shown that, without surface functionalization, Cr2C is half metallic and ferromagnetic (FM) configuration [31], V2C exhibits metallic and antiferromagnetic (AFM) configuration [32], and Tin+1Cn and Tin+1Nn (n = 1–9) show magnetic configuration [33]. While functionalized MXenes alter magnetism, others, such as Cr2CX2 (X=OH, O and F), V2CX2 (X=F, OH), and Ti2CO2, are semiconductors [31,32,33,34,35]. Structural symmetry is a key factor in determining the electronic properties of 2D materials [36,37]. If structural symmetry is broken, it is desirable for 2D materials to have electronic and magnetic properties.
Inspired by the successful synthesis of Janus monolayers of TM dichalcogenides [38], MXenes with Janus structures are worth studying further, especially concerning their electronic structures and magnetic properties. Janus refers to MXenes that break the symmetry through asymmetric surface functional groups or different types of TM elements [39]. A previous report has theoretically studied the electronic and magnetic properties of Janus MXenes; it indicated that, by selecting an appropriate terminal group of upper and lower surfaces, the band gap of Janus MXenes can be successfully adjusted to different regions [40]. Therefore, we consider that different TM atoms may also regulate the charge and chemical environment around the atom, which causes Janus MXenes to exhibit significantly different electronic and magnetic properties.
In this paper, using first-principles calculations, we employed M’MCO2 (M’ and M stands for V, Cr, and Mn) configurations to investigate the effect of different types of TM on the structure and the magnetic and electronic properties under the same functional groups. We constructed different magnetic configurations (nonmagnetic (NM), FM, and AFM) for each M’MCO2 structure, researched their magnetic properties, and screened out the magnetic ground state. Then, we studied the electronic structure of the magnetic ground state. The results showed that Janus MXenes can adjust the band gap, the magnetic ground state, and the net output magnetic moments, which is a very good control method. Due to its asymmetric structure, Janus MXenes can flexibly control the magnetism of a system by applying small electric fields. This work provides theoretical guidance for the realization of the magnetic controllability of MXene materials.

2. Materials and Methods

All calculations were carried out using the Vienna ab initio simulation package (VASP), based on density functional theory (DFT) [41,42]. The generalized gradient approximation (GGA), with the Perdew–Burke–Ernzerhof (PBE) functional, was used for the exchange and correlation functional [43,44]. Interactions between electrons and nuclei were described by the projector augmented wave (PAW) method [45]. A plane wave kinetic energy cutoff 600 eV was employed. The convergence criteria of total energy and atomic force for each atom were set to 10−5 eV per unit cell and 10−4 eV/Å, respectively.
To account for the energy of localized 3D orbitals of TM atoms properly, the Hubbard “U” correction was employed within the rotationally invariant DFT + U approach proposed [46]. The spin-polarized DFT + U correction [47,48] was applied to strongly correlated Cr, V, and Mn atoms with the typical U = 4 eV value. The specific U value does not change the predicted magnetic ordering nor the easy axis determination [49,50]. The cutoff kinetic energy for plane waves was set to 600 eV. Considering the van der Waals interaction between layers, the Becke–Jonson attenuation DFT + D3 method was performed for empirical correction.
A vacuum spacing of 20 Å along the M’MCO2 normal was used to avoid the interactions caused by the periodic boundary condition. The Brillouin zone (BZ) was sampled using 11 × 11 × 1 Γ-centered, k-point Monkhorst-Pack grids for the calculations of relaxation and electronic structures for NM, FM, and AFM1 primitive cells. Additionally, k-mesh was decreased to 6 × 12 × 1 for 2 × 1 × 1 AFM2 and AFM3 supercells. In the static self-consistent calculation, k-point grid sampling of 20 × 20 × 1 was used for the primitive cell, and k-point grid sampling of 12 × 24 × 1 was used for the 2 × 1 × 1 supercell.

3. Results

3.1. Stable Structures of Janus MXenes

The monolayer M2C MXene is a centered honeycomb structure with P3m1 symmetry, in which the 2D hexagonal C atom is sandwiched between two hexagonal M atoms. There are four possible configurations for O atoms absorbed on the M atom [51]: (a) O atoms located right above the M atoms (top sites); (b) O atoms located at the hollow sites of adjacent C atoms (hcp sites); (c) O atoms located at the hollow sites of contralateral M atoms (fcc sites); (d) on the one side, O atoms are at fcc sites, and on the other side, O atoms are at the hcp sites. According to previous research by Tan [52] and Wang [53], (b) configuration is stable for CrMnCO2 and Cr2CO2 and (c) configuration is stable for VCrCO2, VMnCO2, V2CO2, and Mn2CO2. So, we selected those configurations for the following calculations. Figure 1 shows the structures of symmetric V2CO2, Cr2CO2, and Mn2CO2. The arrangement of atoms observed from the top and bottom is the same. Figure 2 shows the structures of Janus MXenes VCrCO2, VMnCO2, and CrMnCO2. It can be seen that the arrangement of atoms seen from the top and bottom is different, so the symmetry of VCrCO2, VMnCO2, and CrMnCO2 is lower than that of V2CO2, Cr2CO2, and Mn2CO2, which is consistent with the symmetry of their space group. The basic information of their lattice parameters is shown in Table 1.
Many compounds of V, Cr, and Mn are magnetic [39]. We calculated the total energy of the non-spin-polarized system and the spin-polarized system, respectively, by using standard DFT method: the result is shown in Table 2. It can be seen that, except V2CO2, the total energy of the spin polarization is lower than that of the non-spin polarization. When taking spin polarization into account, obvious magnetic moment can be observed in magnetic atoms. Therefore, the ground states of VCrCO2, VMnCO2, CrMnCO2, Cr2CO2, and Mn2CO2 must be magnetic, while the ground state of V2CO2 is NM. Although the ground states of V2CO2 are NM, the difference between the NM and the magnetic state is very small (about 0.0002 eV). When considering the spin polarization in the system, the V atom has about 1 μB/atom sized magnetic moment. Under certain conditions, NM may become magnetic, so it is necessary to study its magnetic properties.
Considering the magnetism of the TM atoms, we employed the FM and AFM order for each M’MCO2 configuration, as shown in Figure 3. For FM configurations, the magnetic moments of M atoms are parallel, while for AFM configurations, the magnetic moments are antiparallel with each other. According to the different coupling kinds between atoms, we constructed three different AFM configurations, named AFM1, AFM2, and AFM3. AFM1 configuration is characterized by intralayer FM coupling and interlayer AFM coupling; AFM2 configuration is characterized by intralayer AFM coupling and interlayer FM coupling; AFM3 configuration is characterized by AFM coupling of atoms both intralayer and interlayer. The initial models of NM, FM, and AFM configurations are completely the same, but due to the different coupling models of magnetic atoms, after structure optimization, different configurations will have different lattice parameters, total energy, electronic structure, and other aspects. Compared to the initial models, the lattice constants of NM hardly change, while the corresponding FM and AFM are slight increased. Meanwhile, FM and AFM configurations symmetries are also reduced, which is related to the coupling between magnetic atoms after spin polarization, as shown in Tables S1–S6.

3.2. Magnetic Properties

The spin polarization can be corrected by adopting the DFT + U method, but it will introduce additional situ coulomb interaction energy. However, U is not added in the case of the non-spin-polarized system, which means that the total energy of the two system do not have comparability. Therefore, in the following analysis, we study the electronic structures and magnetic properties of the ground states of VCrCO2, VMnCO2, CrMnCO2, V2CO2, Cr2CO2, and Mn2CO2 configurations under spin polarization, regardless of NM. The calculated total energy is shown in Table 3. The coupling effect between magnetic configurations is different, making the corresponding energy and other properties different. The total energy difference between different magnetic states is very small, which means that the ground states of AFM and FM are unstable in a specific environment. For each M’MCO2 configuration, the configuration with the lowest energy is its most stable configuration state—the magnetic ground state; moreover, this is the focus of the present analysis and study. From the value, we can obtain that the magnetic ground states of VCrCO2, VMnCO2, and Cr2CO2 are FM, and that the ground state energies are −37.321 eV/u.c, −36.936 eV/u.c, and −35.488 eV/u.c, respectively. The magnetic ground state of CrMnCO2 is AFM3, and the ground state energy is −35.707 eV/u.c. The ground state of V2CO2 is NM, the magnetic ground state is AFM1, and the magnetic ground state energy is −38.020 eV/u.c. The magnetic ground state of Mn2CO2 is AFM2, and the ground state energy is −35.989 eV/u.c. In previous studies on the magnetic properties of MXenes, Mohammad Khazaei [35] and Tan [54] calculated the magnetic ground state of Cr2CO2 as FM, while Hu [32] obtained the magnetic ground state of V2CX2 (X=F, OH) as AFM. The conclusion of these studies is consistent with our calculated results. Additionally, we can conclude that, when replacing TM atoms, symmetric MXenes V2CO2, Cr2CO2, and Mn2CO2 become Janus MXenes VCrCO2, VMnCO2, and CrMnCO2, respectively; the magnetic ground states will change, and Janus MXenes can regulate the magnetic ground states.
The magnetic moments of all magnetic configurations of each M’MCO2 are summarized in Tables S7–S12. Additionally, we drew the curves of the magnetic moments under different magnetic configurations and M’MCO2 configurations, as shown in Figure 4. From the contribution of atomic species to the magnetic moments, we can find that the magnetic moments of C and O are close to 0 and the magnetic moment is mainly contributed by the TM atoms V, Cr, and Mn. In addition, the curves satisfied μ(Mn) > μ(Cr) > μ(V) because of the different electron numbers—Mn has one more electron than Cr, and Cr has one more electron than V. In the FM configurations, the order of total magnetic moment is μ(Mn2CO2) > μ(MnCrCO2) > μ(Cr2CO2) > μ(VMnCO2) μ(VCrCO2) > μ(V2CO2). The large the specific gravity of Mn in the configuration, the greater the net magnetic moment; the large the specific gravity of V, the smaller the net magnetic moment, which agrees with μ(Mn) > μ(Cr) > μ(V). Because the magnetic moment of V atom is small, when the TM atom in MXene is V, the stable configuration tends to be nonmagnetic. This means that the ground state of V2CO2 is nonmagnetic, while the ground states of VCrCO2, VMnCO2, CrMnCO2, Cr2CO2, and Mn2CO2 are magnetic. As the magnetic order changes, the magnetic moments of V, Cr, and Mn have little change, and it basically maintains a horizontal trend within the range of 0.50 μB. It indicates that the type of TM atom is a decisive factor for the magnetic moment; moreover, the environment of atoms and the coupling mode between atoms have little effect on the magnetic moment.
Meanwhile, the total net magnetic moment is greatly affected by the magnetic configuration. It is clear that FM shows obvious magnetic moment, in which the magnetic moment of magnetic atoms is in the same direction. The total magnetic moment is similar to the algebraic sum of magnetic moments of magnetic atoms, so it has a large magnetic moment output. As for AFM1, Janus MXenes show obvious magnetic moment, while the net magnetic moment of symmetric MXenes is almost 0. Given that the intralayer atoms are composed of FM coupling, the different magnetic moments of the top and bottom atoms cannot completely cancel the Janus MXene; therefore, it has net magnetic moments and exhibits ferromagnetism. In contrast to the symmetric MXenes with the same top and bottom atoms, the magnetic moment can be completely cancelled out, so the net magnetic moment is 0 and it exhibits anti-ferromagnetism. The net magnetic moments of AFM2 and AFM3 are almost 0, a value which does not show magnetic moment externally. The reason is that both the intralayer coupling is AFM and the adjacent electrons have opposite spin directions, which causes the net magnetic moment of top and bottom layers to be 0, a value which does not show magnetic moment externally. We discover that the higher the symmetry of the magnetic moment, the lower the total energy, and the more stable this configuration will be. Besides, there is modulation between different TM atoms in Janus MXenes. When V atoms are replaced with Cr in V2CO2, the magnetic moment of the V atoms becomes smaller; meanwhile, when Mn atoms are replaced with Cr in Mn2CO2, the magnetic moment of the Mn atoms becomes large—the modulation effects of Cr atoms on V2CO2 and Mn2CO2 are different. As for the Cr2CO2 configuration, replacing the Cr atoms with V or Mn all will cause the magnetic moment of the Cr atoms to become large. Therefore, we conclude that Janus MXenes can manipulate the size of magnetic moment.

3.3. Electronic Properties

For the above magnetic ground states, we further explored their electronic properties, and calculated their band structures and densities of state (DOS), respectively. Figure 5 shows the band structures of each M’MCO2. Additionally, we found that the spin-up and spin-down curves of Mn2CO2, CrMnCO2, and V2CO2 almost completely coincide, which is consistent with AFM configurations; while the spin-up and spin-down curves of VCrCO2, VMnCO2, and Cr2CO2 split, which are almost the only spin-up curves near the Fermi level—this finding is consistent with FM configurations. Therefore, we found that the configuration of Mn2CO2, CrMnCO2, and V2CO2 are FM, and the configuration of VCrCO2, VMnCO2, and Cr2CO2 are FM.
As for M’MCO2 with AFM configurations, near the Fermi level, the valence band and the conduction band of Mn2CO2 are clearly separated, and no band curve crosses the Fermi level. Moreover, the top valence band is near the point M (0.622), and the bottom conduction band is near the point K (1.358), illustrating that Mn2CO2 is an indirect band gap semiconductor, a finding that is in keeping with the results of Zhou [55]. Meanwhile, both CrMnCO2 and V2CO2 have band curves crossing the Fermi level, and their top valence band and bottom conduction band are located at the point Γ, with a small band gap width, showing metallic character. With regard to M’MCO2, with FM configurations, it can be seen from Figure 5a,b,e that the red curves (spin-down) are distributed on both sides of the Fermi level, with large band gap widths, while the blue curves (spin-up) are densely distributed, crossing the Fermi level. The electronic states with spin-up make the band gap narrow—these are metallic materials. On the whole, we concluded that, when M is replaced with M’—causing non-Janus MXene to become Janus MXene—the band gap width was greatly reduced and the conductivity became better; therefore, Janus MXenes can regulate the band gap.
To facilitate the description of the modulation action of Janus MXenes, we plotted the density of state (DOS) of the magnetic ground state of M’MCO2, as shown in Figure 6. There are a large number of electrons near the Fermi level for VCrCO2, VMnCO2, CrMnCO2, V2CO2, and Cr2CO2, indicating that they have metallic properties. However, there are almost no electrons at the Fermi level for Mn2CO2, which can be considered as the forbidden band, and the band width is 0.7071 eV, indicating that it is a semiconductor. In addition, we found that the PDOS of the d orbitals of V, Cr, and Mn contributed most of the TDOS. For symmetric MXenes, the PDOS of d orbitals of V, Cr, and Mn are almost consistent with the TDOS of V2CO2, Cr2CO2, and Mn2CO2 in the energy range of −1~4 eV, −3~6 eV, and 2~6 eV, respectively. Meanwhile, for Janus MXenes, the TDOS are the synergy of d orbitals of different TM atoms. The d orbitals of the V atoms contributed most of the electrons in the following energy ranges: 0~2 eV for VCrCO2; −1~2 eV and 4~6 eV for VMnCO2. The d orbitals of the Cr atoms contributed most of the electrons in the following energy ranges: −2~0 eV and 2~6 eV for VCrCO2, −3~4 eV for CrMnCO2. The d orbitals of the Mn atoms contributed most of the electrons in the following energy ranges: −6~-1 eV and 2~4 eV for VMnCO2, and −5~−3 eV and 4~6 eV for CrMnCO2. The sum of the d orbitals of V, Cr, and Mn is almost equal to the TDOS, showing that the magnetism of the system is mainly derived from the d orbital electrons of magnetic atoms.
Since the magnetic moment of the system is proportional to the area integral of the upper and lower curves, the greater the difference between the spin-up and spin-down, the greater the split, and the greater the net magnetic moment. The upper curves and lower curves of V2CO2 and Mn2CO2 are nearly symmetric and the net magnetic moment is almost 0, which is consistent with the magnetic ground state of AFM. The magnetic ground state of Cr2CO2 is FM, and its upper and lower curves have a certain split, where the peak position energy of the upper curve is lower, and the peak position energy of the lower curve is higher. The area integral of DOS of the upper curve and the lower curve is close, within the energy range of −7~−3 eV, the spin-up electron state occupies the dominant position in the range of −3~2 eV, and the spin-down electron state occupies the dominant position in the range of 2~6 eV, which causes the FM configuration to have 4.184 μB/atom net magnetic moment.
When a V atom in V2CO2 is replaced by Cr or Mn atoms—becoming Janus MXene VCrCO2 or VMnCO2, with the magnetic ground state becoming FM—the upper and lower curves are clearly split. The main electron state is spin-up in the range of −2~2 eV and spin-down in the range of 2~6 eV. Below −2 eV, the peak of spin-up moves to low energy and the peak of spin-down moves to high energy. When a Cr atom is replaced with an Mn atom in Cr2CO2—becoming Janus MXene CrMnCO2, with the magnetic ground state becoming AFM3—the upper and lower curves are symmetric and the net magnetic moment is 0. In conclusion, we can judge the magnetic configuration of a system by the magnetic moment of the atoms, the energy band, and the DOS. Janus MXenes can regulate the band gap width, the magnetic ground state, and the net magnetic moment; this is a great adjusting method.

4. Conclusions

We investigated the magnetic properties and electron structures of M’MCO2 with different magnetic configurations. The following results were found: the magnetic ground states of VCrCO2, VMnCO2, and Cr2CO2 are FM; the magnetic ground state of CrMnCO2 is AFM2; the magnetic ground state of Mn2CO2 is AFM2; the magnetic ground state of V2CO2 is AFM1 and its ground state is NM. The band gap widths of VCrCO2, VMnCO2, CrMnCO2, V2CO2, and Cr2CO2 are no more than 0.02 eV, showing metallic properties; meanwhile, Mn2CO2 is a semiconductor, with a 0.7071 eV band gap width. Moreover, we determined the magnetic configuration of the systems through the magnetic moment, the energy band, and the DOS. Further analysis showed that Janus MXenes can adjust the band gap, magnetic ground state, and output net magnetic moment, resulting in smaller band gap widths and better electrical conductivities when compared with corresponding materials. These theoretical results provide guidance for further experimental verification and electronic device application.

Supplementary Materials

The following are available online at https://0-www-mdpi-com.brum.beds.ac.uk/article/10.3390/nano12030556/s1, Tables S1–S6: the lattice parameters of VCrCO2, VMnCO2, CrMnCO2, V2CO2, Cr2CO2, and Mn2CO2, Tables S7–S12: the magnetic moment of VCrCO2, VMnCO2, CrMnCO2, V2CO2, Cr2CO2, and Mn2CO2.

Author Contributions

The study was planned and designed by P.G. and P.Q. DFT calculations were performed by P.G. and M.S. The manuscript was prepared by P.G., M.S., X.W., Q.L., S.H., and Y.S. All authors discussed the results and commented on the manuscript together. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by National Key Research and Development Program of China(2021YFB3802100), National Natural Science Foundation of China (Grant No.51971031), National Natural Science Foundation of China (51801010), Guangdong Province Key Area R&D Program (2019B010940001), and Guangdong Provincial Key Laboratory of Meta-RF Microwave.

Data Availability Statement

The datasets generated during and/or analyzed during the current study are available from the corresponding author.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Novoselov, K.S.; Geim, A.K.; Morozov, S.V.; Jiang, D.; Katsnelson, M.I.; Grigorieva, I.V.; Dubonos, S.V.; Firsov, A.A. Two-dimensional gas of massless Dirac fermions in graphene. Nature 2005, 438, 197–200. [Google Scholar] [CrossRef] [PubMed]
  2. Zhang, Y.; Tan, Y.W.; Stormer, H.L.; Kim, P. Experimental observation of the quantum Hall effect and Berry’s phase in graphene. Nature 2005, 438, 201–204. [Google Scholar] [CrossRef] [Green Version]
  3. Novoselov, K.S.; Geim, A.K.; Morozov, S.V.; Jiang, D.; Zhang, Y.; Dubonos, S.V.; Grigorieva, I.V.; Firsov, A.A. Electric field in atomically thin carbon films. Science 2004, 306, 666–669. [Google Scholar] [CrossRef] [Green Version]
  4. VahidMohammadi, A.; Rosen, J.; Gogotsi, Y. The world of two-dimensional carbides and nitrides (MXenes). Science 2021, 372, 6547. [Google Scholar] [CrossRef] [PubMed]
  5. Shekhirev, M.; Shuck, C.E.; Sarycheva, A.; Gogotsi, Y. Characterization of MXenes at every step, from their precursors to single flakes and assembled films. Prog. Mater. Sci. 2021, 120, 100757. [Google Scholar] [CrossRef]
  6. Ahsan, M.A.; He, T.; Eid, K.; Abdullah, A.M.; Sanad, M.F.; Aldalbahi, A.; Alvarado-Tenorio, B.; Du, A.; Puente Santiago, A.R.; Noveron, J.C. Controlling the Interfacial Charge Polarization of MOF-Derived 0D–2D vdW Architectures as a Unique Strategy for Bifunctional Oxygen Electrocatalysis. ACS Appl. Mater. Interfaces 2022, 14, 3919–3929. [Google Scholar] [CrossRef]
  7. Naguib, M.; Kurtoglu, M.; Presser, V.; Lu, J.; Niu, J.; Heon, M.; Hultman, L.; Gogotsi, Y.; Barsoum, M.W. Two-dimensional nanocrystals produced by exfoliation of Ti 3AlC 2. Adv. Mater. 2011, 23, 4248–4253. [Google Scholar] [CrossRef] [Green Version]
  8. Naguib, M.; Mochalin, V.N.; Barsoum, M.W.; Gogotsi, Y. 25th anniversary article: MXenes: A new family of two-dimensional materials. Adv. Mater. 2014, 26, 992–1005. [Google Scholar] [CrossRef]
  9. Hu, T.; Li, Z.; Hu, M.; Wang, J.; Hu, Q.; Li, Q.; Wang, X. Chemical Origin of Termination-Functionalized MXenes: Ti3C2T2 as a Case Study. J. Phys. Chem. C 2017, 121, 19254–19261. [Google Scholar] [CrossRef]
  10. Li, L. Lattice dynamics and electronic structures of Ti3C2O2 and Mo2TiC2O2 (MXenes): The effect of Mo substitution. Comput. Mater. Sci. 2016, 124, 8–14. [Google Scholar] [CrossRef]
  11. Mashtalir, O.; Naguib, M.; Mochalin, V.N.; Dall’Agnese, Y.; Heon, M.; Barsoum, M.W.; Gogotsi, Y. Intercalation and delamination of layered carbides and carbonitrides. Nat. Commun. 2013, 4, 1716. [Google Scholar] [CrossRef] [PubMed]
  12. Ren, S.; Feng, R.; Cheng, S.; Wang, Q.; Zheng, Z. Synergistic Catalytic Acceleration of MXene/MWCNTs as Decorating Materials for Ultrasensitive Detection of Morphine. Electroanalysis 2021, 33, 1471–1483. [Google Scholar] [CrossRef]
  13. Feng, X.; Yu, Z.; Long, R.; Li, X.; Shao, L.; Zeng, H.; Zeng, G.; Zuo, Y. Self-assembling 2D/2D (MXene/LDH) materials achieve ultra-high adsorption of heavy metals Ni2+ through terminal group modification. Sep. Purif. Technol. 2020, 253, 117525. [Google Scholar] [CrossRef]
  14. Hantanasirisakul, K.; Gogotsi, Y. Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes). Adv. Mater. 2018, 30, 1804779. [Google Scholar] [CrossRef] [PubMed]
  15. Jiang, X.; Kuklin, A.V.; Baev, A.; Ge, Y.; Ågren, H.; Zhang, H.; Prasad, P.N. Two-dimensional MXenes: From morphological to optical, electric, and magnetic properties and applications. Phys. Rep. 2020, 848, 1–58. [Google Scholar] [CrossRef]
  16. Xia, F.; Wang, H.; Xiao, D.; Dubey, M.; Ramasubramaniam, A. Two-dimensional material nanophotonics. Nat. Photonics 2014, 8, 899–907. [Google Scholar] [CrossRef]
  17. Yao, H.; Zhang, C.; Wang, Q.; Li, J.; Yu, Y.; Xu, F.; Wang, B.; Wei, Y. Novel two-dimensional layered mosi2z4 (Z = p, as): New promising optoelectronic materials. Nanomaterials 2021, 11, 559. [Google Scholar] [CrossRef]
  18. Shah, S.A.A.; Sayyad, M.H.; Khan, K.; Sun, J.; Guo, Z. Application of mxenes in perovskite solar cells: A short review. Nanomaterials 2021, 11, 2151. [Google Scholar] [CrossRef]
  19. Wyatt, B.C.; Rosenkranz, A.; Anasori, B. 2D MXenes: Tunable Mechanical and Tribological Properties. Adv. Mater. 2021, 33, 2007973. [Google Scholar] [CrossRef]
  20. Fiori, G.; Bonaccorso, F.; Iannaccone, G.; Palacios, T.; Neumaier, D.; Seabaugh, A.; Banerjee, S.K.; Colombo, L. Electronics based on two-dimensional materials. Nat. Nanotechnol. 2014, 9, 768–779. [Google Scholar] [CrossRef]
  21. Li, J.S.; Wang, Y.; Liu, C.H.; Li, S.L.; Wang, Y.G.; Dong, L.Z.; Dai, Z.H.; Li, Y.F.; Lan, Y.Q. Coupled molybdenum carbide and reduced graphene oxide electrocatalysts for efficient hydrogen evolution. Nat. Commun. 2016, 7, 11204. [Google Scholar] [CrossRef] [PubMed]
  22. Pandey, M.; Thygesen, K.S. Two-Dimensional MXenes as Catalysts for Electrochemical Hydrogen Evolution: A Computational Screening Study. J. Phys. Chem. C 2017, 121, 13593–13598. [Google Scholar] [CrossRef] [Green Version]
  23. Liu, A.; Liang, X.; Ren, X.; Guan, W.; Gao, M.; Yang, Y.; Yang, Q.; Gao, L.; Li, Y.; Ma, T. Recent Progress in MXene-Based Materials: Potential High-Performance Electrocatalysts. Adv. Funct. Mater. 2020, 30, 2003437. [Google Scholar] [CrossRef]
  24. Nguyen, V.H.; Nguyen, B.S.; Hu, C.; Nguyen, C.C.; Nguyen, D.L.T.; Dinh, M.T.N.; Vo, D.V.N.; Trinh, Q.T.; Shokouhimehr, M.; Hasani, A.; et al. Novel architecture titanium carbide (Ti3C2Tx) mxene cocatalysts toward photocatalytic hydrogen production: A mini-review. Nanomaterials 2020, 10, 602. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  25. Yang, J.; Zhang, S.; Wang, A.; Wang, R.; Wang, C.K.; Zhang, G.P.; Chen, L. High magnetoresistance in ultra-thin two-dimensional Cr-based MXenes. Nanoscale 2018, 10, 19492–19497. [Google Scholar] [CrossRef] [PubMed]
  26. Bonaccorso, F.; Colombo, L.; Yu, G.; Stoller, M.; Tozzini, V.; Ferrari, A.C.; Ruoff, R.S.; Pellegrini, V. Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage. Science 2015, 347, 1246501. [Google Scholar] [CrossRef] [PubMed]
  27. Wu, X.; Wang, Z.; Yu, M.; Xiu, L.; Qiu, J. Stabilizing the MXenes by Carbon Nanoplating for Developing Hierarchical Nanohybrids with Efficient Lithium Storage and Hydrogen Evolution Capability. Adv. Mater. 2017, 29, 1607017. [Google Scholar] [CrossRef]
  28. Shinde, P.; Patil, A.; Lee, S.C.; Jung, E.; Jun, S.C. Two-dimensional MXenes for electrochemical energy storage applications. J. Mater. Chem. A 2022, 10, 1105–1149. [Google Scholar] [CrossRef]
  29. Pan, J.; Lany, S.; Qi, Y. Computationally Driven Two-Dimensional Materials Design: What Is Next? ACS Nano 2017, 11, 7560–7564. [Google Scholar] [CrossRef]
  30. Frey, N.C.; Wang, J.; Vega Bellido, G.I.; Anasori, B.; Gogotsi, Y.; Shenoy, V.B. Prediction of Synthesis of 2D Metal Carbides and Nitrides (MXenes) and Their Precursors with Positive and Unlabeled Machine Learning. ACS Nano 2019, 13, 3031–3041. [Google Scholar] [CrossRef]
  31. Lee, Y.; Cho, S.B.; Chung, Y.C. Tunable indirect to direct band gap transition of monolayer Sc 2CO2 by the strain effect. ACS Appl. Mater. Interfaces 2014, 6, 14724–14728. [Google Scholar] [CrossRef]
  32. Hu, J.; Xu, B.; Ouyang, C.; Yang, S.A.; Yao, Y. Investigations on V2C and V2CX2 (X = F, OH) monolayer as a promising anode material for Li Ion batteries from first-principles calculations. J. Phys. Chem. C 2014, 118, 24274–24281. [Google Scholar] [CrossRef]
  33. Xie, Y.; Kent, P.R.C. Hybrid density functional study of structural and electronic properties of functionalized Tin + 1Xn (X = C, N) monolayers. Phys. Rev. B-Condens. Matter Mater. Phys. 2013, 87, 235441. [Google Scholar] [CrossRef] [Green Version]
  34. Si, C.; Zhou, J.; Sun, Z. Half-Metallic Ferromagnetism and Surface Functionalization-Induced Metal-Insulator Transition in Graphene-like Two-Dimensional Cr2C Crystals. ACS Appl. Mater. Interfaces 2015, 7, 17510–17515. [Google Scholar] [CrossRef]
  35. Khazaei, M.; Arai, M.; Sasaki, T.; Chung, C.Y.; Venkataramanan, N.S.; Estili, M.; Sakka, Y.; Kawazoe, Y. Novel electronic and magnetic properties of two-dimensional transition metal carbides and nitrides. Adv. Funct. Mater. 2013, 23, 2185–2192. [Google Scholar] [CrossRef]
  36. Li, F.; Wei, W.; Zhao, P.; Huang, B.; Dai, Y. Electronic and Optical Properties of Pristine and Vertical and Lateral Heterostructures of Janus MoSSe and WSSe. J. Phys. Chem. Lett. 2017, 8, 5959–5965. [Google Scholar] [CrossRef]
  37. Yang, Q.; Tan, C.; Meng, R.; Jiang, J.; Liang, Q.; Sun, X.; Yang, D.; Chen, X. The intriguing electronic and optical properties modulation of hydrogen and fluorine codecorated silicene layers. Appl. Surf. Sci. 2017, 398, 73–80. [Google Scholar] [CrossRef]
  38. Lu, A.Y.; Zhu, H.; Xiao, J.; Chuu, C.P.; Han, Y.; Chiu, M.H.; Cheng, C.C.; Yang, C.W.; Wei, K.H.; Yang, Y.; et al. Janus monolayers of transition metal dichalcogenides. Nat. Nanotechnol. 2017, 12, 744–749. [Google Scholar] [CrossRef] [Green Version]
  39. Frey, N.C.; Bandyopadhyay, A.; Kumar, H.; Anasori, B.; Gogotsi, Y.; Shenoy, V.B. Surface-Engineered MXenes: Electric Field Control of Magnetism and Enhanced Magnetic Anisotropy. ACS Nano 2019, 13, 2831–2839. [Google Scholar] [CrossRef]
  40. He, J.; Lyu, P.; Sun, L.Z.; Morales García, Á.; Nachtigall, P. High temperature spin-polarized semiconductivity with zero magnetization in two-dimensional Janus MXenes. J. Mater. Chem. C 2016, 4, 6500–6509. [Google Scholar] [CrossRef]
  41. Kresse, G.; Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B-Condens. Matter Mater. Phys. 1996, 54, 11169. [Google Scholar] [CrossRef]
  42. Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B-Condens. Matter Mater. Phys. 1999, 59, 1758–1775. [Google Scholar] [CrossRef]
  43. Perdew, J.P.; Chevary, J.A.; Vosko, S.H.; Jackson, K.A.; Pederson, M.R.; Singh, D.J.; Fiolhais, C. Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation. Phys. Rev. B 1992, 46, 6671. [Google Scholar] [CrossRef]
  44. Perdew, J.P.; Wang, Y. Accurate and simple analytic representation of the electron-gas correlation energy. Phys. Rev. B 1992, 45, 13244. [Google Scholar] [CrossRef] [PubMed]
  45. Blöchl, P.E. Projector augmented-wave method. Phys. Rev. B 1994, 50, 17953–17979. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  46. Hubbard, J. Electron correlations in narrow energy bands. Proc. R. Soc. Lond. Ser. A Math. Phys. Sci. 1963, 276, 238–257. [Google Scholar] [CrossRef]
  47. Jain, A.; Hautier, G.; Ong, S.P.; Moore, C.J.; Fischer, C.C.; Persson, K.A.; Ceder, G. Formation enthalpies by mixing GGA and GGA + U calculations. Phys. Rev. B-Condens. Matter Mater. Phys. 2011, 84, 045115. [Google Scholar] [CrossRef] [Green Version]
  48. Zhou, F.; Cococcioni, M.; Marianetti, C.A.; Morgan, D.; Ceder, G. First-principles prediction of redox potentials in transition-metal compounds with LDA + U. Phys. Rev. B-Condens. Matter Mater. Phys. 2004, 70, 1–8. [Google Scholar] [CrossRef] [Green Version]
  49. Kumar, H.; Frey, N.C.; Dong, L.; Anasori, B.; Gogotsi, Y.; Shenoy, V.B. Tunable Magnetism and Transport Properties in Nitride MXenes. ACS Nano 2017, 11, 7648–7655. [Google Scholar] [CrossRef]
  50. Frey, N.C.; Kumar, H.; Anasori, B.; Gogotsi, Y.; Shenoy, V.B. Tuning Noncollinear Spin Structure and Anisotropy in Ferromagnetic Nitride MXenes. ACS Nano 2018, 12, 6319–6325. [Google Scholar] [CrossRef] [PubMed]
  51. Chen, Z.; Huang, S.; Huang, B.; Wan, M.; Zhou, N. Transition metal atoms implanted into MXenes (M2CO2) for enhanced electrocatalytic hydrogen evolution reaction. Appl. Surf. Sci. 2020, 509, 145319. [Google Scholar] [CrossRef]
  52. Tan, Z.; Fang, Z.; Li, B.; Yang, Y. First-Principles Study of the Ferromagnetic Properties of Cr2CO2and Cr2NO2MXenes. ACS Omega 2020, 5, 25848–25853. [Google Scholar] [CrossRef] [PubMed]
  53. Wang, X.; Wang, C.; Ci, S.; Ma, Y.; Liu, T.; Gao, L.; Qian, P.; Ji, C.; Su, Y. Accelerating 2D MXene catalyst discovery for the hydrogen evolution reaction by computer-driven workflow and an ensemble learning strategy. J. Mater. Chem. A 2020, 8, 23488–23497. [Google Scholar] [CrossRef]
  54. Tan, C.; Cao, X.; Wu, X.J.; He, Q.; Yang, J.; Zhang, X.; Chen, J.; Zhao, W.; Han, S.; Nam, G.H.; et al. Recent Advances in Ultrathin Two-Dimensional Nanomaterials. Chem. Rev. 2017, 117, 6225–6331. [Google Scholar] [CrossRef] [PubMed]
  55. Zhou, Y.; Zu, X. Mn2C sheet as an electrode material for lithium-ion battery: A first-principles prediction. Electrochim. Acta 2017, 235, 167–174. [Google Scholar] [CrossRef]
Nanomaterials 12 00556 g001 550
Figure 1. V2CO2, Cr2CO2, and Mn2CO2 structures: (a,c,e) and (b,d,f) are the side and top views of V2CO2, Cr2CO2, and Mn2CO2 structures, respectively.
Figure 1. V2CO2, Cr2CO2, and Mn2CO2 structures: (a,c,e) and (b,d,f) are the side and top views of V2CO2, Cr2CO2, and Mn2CO2 structures, respectively.
Nanomaterials 12 00556 g001
Nanomaterials 12 00556 g002 550
Figure 2. VCrCO2, VMnCO2, and CrMnCO2 structures: (a,d,g) and (b,e,h) and (c,f,i) are the side, top, and bottom views of VCrCO2, VMnCO2, and CrMnCO2 structures, respectively.
Figure 2. VCrCO2, VMnCO2, and CrMnCO2 structures: (a,d,g) and (b,e,h) and (c,f,i) are the side, top, and bottom views of VCrCO2, VMnCO2, and CrMnCO2 structures, respectively.
Nanomaterials 12 00556 g002
Nanomaterials 12 00556 g003 550
Figure 3. M’MCO2 magnetic state configurations: (a–e) represent NM, FM, AFM1, AFM2, and AFM3 configurations, respectively. In M’/M atoms, “+” represents spin-up and “−“ represents spin-down.
Figure 3. M’MCO2 magnetic state configurations: (a–e) represent NM, FM, AFM1, AFM2, and AFM3 configurations, respectively. In M’/M atoms, “+” represents spin-up and “−“ represents spin-down.
Nanomaterials 12 00556 g003
Nanomaterials 12 00556 g004 550
Figure 4. Magnetic moment curves under different M’MCO2 configurations. (a) VCrCO2 configuration; (b) VMnCO2 configuration; (c) CrMnCO2 configuration; (d) V2CO2 configuration; (e) Cr2CO2 configuration; (f) Mn2CO2 configuration.
Figure 4. Magnetic moment curves under different M’MCO2 configurations. (a) VCrCO2 configuration; (b) VMnCO2 configuration; (c) CrMnCO2 configuration; (d) V2CO2 configuration; (e) Cr2CO2 configuration; (f) Mn2CO2 configuration.
Nanomaterials 12 00556 g004
Nanomaterials 12 00556 g005 550
Figure 5. The band gap of M’MCO2. (a) VCrCO2; (b)VMnCO2; (c) CrMnCO2; (d)V2CO2; (e) Cr2CO2; (f) Mn2CO2.
Figure 5. The band gap of M’MCO2. (a) VCrCO2; (b)VMnCO2; (c) CrMnCO2; (d)V2CO2; (e) Cr2CO2; (f) Mn2CO2.
Nanomaterials 12 00556 g005
Nanomaterials 12 00556 g006 550
Figure 6. DOS of M’MCO2. (a) V2CO2; (b) VCrCO2; (c) Cr2CO2; (d) VMnCO2; (e) Mn2CO2; (f) CrMnCO2.
Figure 6. DOS of M’MCO2. (a) V2CO2; (b) VCrCO2; (c) Cr2CO2; (d) VMnCO2; (e) Mn2CO2; (f) CrMnCO2.
Nanomaterials 12 00556 g006
Table
Table 1. The lattice parameters of M’MCO2.
Table 1. The lattice parameters of M’MCO2.
VCrCO2VMnCO2CrMnCO2V2CO2Cr2CO2Mn2CO2
Symmetry GroupP3m1
(C3V-1)		P3m1
(C3V-1)		P3m1
(C3V-1)		P 3 ¯ m1
(D3d-3)		P 3 ¯ m1
(D3d-3)		P 3 ¯ m1
(D3d-3)
a/Å2.882.892.662.882.682.87
b/Å2.882.892.662.882.682.87
c/Å21.8121.8121.8121.8121.8121.81
α90°90°90°90°90°90°
β90°90°90°90°90°90°
γ120°120°120°120°120°120°
Table
Table 2. Total energy of spin-polarized and non-spin-polarized systems. NM stands for non-spin-polarized system, magnetic stands for spin-polarized systems, the unit of total energy is eV/u.c (unit cell).
Table 2. Total energy of spin-polarized and non-spin-polarized systems. NM stands for non-spin-polarized system, magnetic stands for spin-polarized systems, the unit of total energy is eV/u.c (unit cell).
VCrCO2VMnCO2CrMnCO2V2CO2Cr2CO2Mn2CO2
NM−44.322−42.926−42.488−45.597 (5)−43.804−40.701
Magnetic−44.502−43.451−42.499−45.597 (3)−43.882−41.431
Table
Table 3. The total energy of FM and AFM structures of M’MCO2, the unit of total energy is eV/u.c (unit cell).
Table 3. The total energy of FM and AFM structures of M’MCO2, the unit of total energy is eV/u.c (unit cell).
FMAFM1AFM2AFM3
VCrCO2−37.321−37.215−37.223−37.223
VMnCO2−36.936−36.921−36.921−36.886
CrMnCO2−34.778−34.349−34.743−35.707
V2CO2−38.013−38.020−37.911−37.918
Cr2CO2−35.488−34.794−35.263−35.365
Mn2CO2−35.934−35.913−35.989−35.746
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Gao, P.; Song, M.; Wang, X.; Liu, Q.; He, S.; Su, Y.; Qian, P. Theoretical Study on the Electronic Structure and Magnetic Properties Regulation of Janus Structure of M’MCO2 2D MXenes. Nanomaterials 2022, 12, 556. https://0-doi-org.brum.beds.ac.uk/10.3390/nano12030556

AMA Style

Gao P, Song M, Wang X, Liu Q, He S, Su Y, Qian P. Theoretical Study on the Electronic Structure and Magnetic Properties Regulation of Janus Structure of M’MCO2 2D MXenes. Nanomaterials. 2022; 12(3):556. https://0-doi-org.brum.beds.ac.uk/10.3390/nano12030556

Chicago/Turabian Style

Gao, Panpan, Minhui Song, Xiaoxu Wang, Qing Liu, Shizhen He, Ye Su, and Ping Qian. 2022. "Theoretical Study on the Electronic Structure and Magnetic Properties Regulation of Janus Structure of M’MCO2 2D MXenes" Nanomaterials 12, no. 3: 556. https://0-doi-org.brum.beds.ac.uk/10.3390/nano12030556

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop