Next Article in Journal
Recent Progress on Micro-Fabricated Alkali Metal Vapor Cells
Previous Article in Journal
Effect of Graphene vs. Reduced Graphene Oxide in Gold Nanoparticles for Optical Biosensors—A Comparative Study
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Biosensors
Volume 12
Issue 3
10.3390/bios12030164
biosensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Self-Powered Wearable Biosensor in a Baby Diaper for Monitoring Neonatal Jaundice through a Hydrovoltaic-Biosensing Coupling Effect of ZnO Nanoarray

by
Zirui Ning
1,†,
Zhihe Long
2,†,
Guangyou Yang
1,
Lili Xing
1 and
Xinyu Xue
1,*
1
School of Physics, University of Electronic Science and Technology of China, Chengdu 611731, China
2
Department of Mechanical Engineering, City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong 999077, China
*
Author to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Biosensors 2022, 12(3), 164; https://0-doi-org.brum.beds.ac.uk/10.3390/bios12030164
Submission received: 25 January 2022 / Revised: 24 February 2022 / Accepted: 4 March 2022 / Published: 6 March 2022
(This article belongs to the Section Wearable Biosensors)
Browse Figures
Versions Notes

Abstract

:
Neonatal jaundice refers to the abnormality of bilirubin metabolism for newborns, and wearable transcutaneous bilirubin meters for real-time measuring the bilirubin concentration is an insistent demand for the babies’ parents and doctors. In this paper, a self-powered wearable biosensor in a baby diaper for real-time monitoring neonatal jaundice has been realized by the hydrovoltaic-biosensing coupling effect of ZnO nanoarray. Without external power supply, the system can work independently, and the hydrovoltaic output can be treated as both the power source and biosensing signal. The working mechanism is that the hydrovoltaic output arises from the urine flowing on ZnO nanoarray and the enzymatic reaction on the surface can influence the output. The sensing information can be transmitted through a wireless transmitter, and thus the parents and doctors can treat the neonatal jaundice of babies in time. This work can potentially promote the development of next generation of biosensors and physiological monitoring system, and expand the scope of self-powered technique and smart healthcare area.

1. Introduction

Neonatal jaundice refers to the abnormality of bilirubin metabolism (the blood bilirubin level rising) for newborns [1,2,3]. Pathological jaundice can make the face and trunk of the baby appear yellow color, accompanied with anemia, hepatosplenomegaly and yellow urine. In severe cases, it is manifested as poor response, listlessness, anorexia and even breathing difficulties [4,5,6]. Due to unpredictable pathological recurrence in several weeks after birth, it is inconvenient for the hospital to carry out examinations in a timely manner [7,8]. Thus, monitoring and uploading the neonatal jaundice status in real time is an insistent demand for the parents and doctors. At present, the conventional method for jaundice detection is based on blood sampling and bilirubin analysis [9,10]. This technique cannot meet the requirement of real-time dynamic monitoring, and the frequent blood drawing with skin damage is unacceptable for children and their parents. To solve the problem, a new wearable transcutaneous bilirubin meter that can be conformably attached on the skin for real-time measuring the bilirubin concentration in body fluid such as urine is highly expected [11].
The urine bilirubin concentration in the baby with pathological neonatal jaundice obviously rise [12,13], and the diaper is usually worn on a baby for holding urine. Thus, a wearable biosensor embedded in baby diaper for continuously detecting bilirubin concentration can realize monitoring neonatal jaundice in real time. Nowadays, some research groups and companies have developed intelligent diapers with various bilirubin biosensor integration. The main working principal of the biosensor is based on traditional electrochemical or chemical colorimetric approaches [14,15,16,17,18]. These methods provide relatively accurate sensing results, but usually need extra and big-sized bulky power supplies, e.g., a battery or capacitor, which raises the cost of the whole system, enlarges the total volume of the diaper and may also cause harm to the health of baby. Recently reported self-powered techniques may potentially remove the power supply from the system [19,20,21,22,23,24]. The urine bilirubin analyzing sites with wireless, battery-free electronics are promising as substitutions by coupling the energy harvesting and biosensing processes in the diaper environment.
In this paper, a self-powered wearable biosensor in a baby diaper for real-time monitoring neonatal jaundice has been realized by the hydrovoltaic-biosensing coupling effect of ZnO nanoarray. The system can work without an external power unit, and has low cost, small size, noninvasive, and flexible features. The working mechanism is that the urine flowing on ZnO nanoarray and the enzymatic reaction (bilirubin and bilirubin oxidase) on the surface can generate bilirubin dependent hydrovoltaic output [25,26,27,28,29,30,31]. The output can be treated as not only the energy for the sensing process but also the biosensing signal. ZnO nanostructures have the characteristics of hydroelectric effect with high output [32,33]. It also can be easily and efficiently functionalized for sensing by surface chemical modification [34]. The main goal of the device is to monitor the bilirubin in urine to determine whether there is a possibility of jaundice in baby. The signal collected by the sensing unit can be transmitted to the wireless transceiver module, and then transmitted to the guardian’s smart device. Once an abnormality is detected, it can be sent to the doctor for treatment in time. This achievement can play an important role in monitoring neonatal pathological jaundice, helping parents of newborns to obtain information about the baby’s fluid in real time, and sending it to the doctor in the event of an early warning. Meanwhile, this work can expand the scope of self-powered techniques and smart healthcare areas.

2. Experimental

2.1. Fabrication of Self-Powered Bilirubin Biosensing Unit

Bilirubin oxidase and bilirubin were provided by Chongqing Amida Biotechnology Co., Ltd (Chongqing, China). The other chemicals were provided by Chengdu Keweizhuo Technology Co., Ltd. (Chengdu, China).
The vertically grown ZnO nanoarray was prepared by a hydrothermal method. A piece of PDMS film attached to a silicon wafer (for keeping the film steady in the solution) was cleaned with deionized water and alcohol, and dried at 60 °C. 0.5 g of Zn(NO3)2·6H2O was dissolved in 38 mL of deionized water, then 2 mL of NH3·H2O was dropped into the solution while stirring. After Zn(NO3)2·6H2O was evenly dissolved, the PDMS film was immersed in the solution. The beaker was quickly sealed and placed in a dry oven, and then kept at 80 °C for 24 h. The PDMS film with ZnO nanoarray grown was finally taken out from the beaker, and stripped off from the silicon wafer [25,35].
The ZnO-grown PDMS film was cut into 20 mm × 30 mm in area, and then ZnO nanoarray were modified with bilirubin oxidase (BOx). Lyophilized bilirubin oxidase powder was dissolved in PBS buffer to form 40 u/mL BOx solution. 0.5 mL BOx solution was evenly and slowly dropped on the nanowires. The film was naturally dried for 3–4 h, and the enzyme was modified on the nanowires [36]. Both ZnO and PDMS have been proven to be nontoxic/biocompatible and can work well on the human body environment [37,38,39].

2.2. Characterization and Measurements

The morphology and microstructure of ZnO nanoarray were investigated by a scanning electron microscope (Gemini SEM300, Oberkochen, Germany). The output hydrovoltaic voltage is measured with electrometer (Keithley 6514, Beaverton, OR, USA).

3. Results and Discussion

3.1. Experimental Design

Figure 1a shows the experimental design and application of self-powered wearable biosensor in baby diaper for real-time monitoring neonatal jaundice. The biosensing unit is embedded in a diaper, and urine can flow across the surface of the device. The output hydrovoltaic voltage of the device can be influenced by the concentration of the target biomolecule (bilirubin) in the urine, serving as the biosensing signal. Biological sensor information can be wirelessly transmitted to parents for determining the health of their baby, realizing immediate treatment in time.
Figure 1b shows the typical manufacturing process of the biosensing unit. The vertically grown ZnO nanoarray on PDMS substrate are prepared by a hydrothermal method. Then ZnO nanoarray are modified with BOx by dropping BOx/PBS solution on the nanowires. The detailed process can be found in the experimental section [25,35,36].

3.2. Device and Material

Figure 2 shows the morphology and microstructure of the self-powered wearable biosensor in the baby diaper. Figure 2a,b show that the device has good flexibility and small size. The device can be embedded in the absorbent layer of baby diaper, and can fit well with the diaper, as shown in Figure 2c,d. The top and side views of ZnO nanoarray are shown in the SEM image of Figure 2e–h. The length of the nanowires is about 3 μm, and the cross section of the nanowires is of hexagonal structure with an average diameter of about 600 nm. The area of the ZnO nanoarray is determined by the size of the substrate. In practical applications, the output mainly depends on the area of the liquid flowing. The thickness of ZnO nanoarray is determined by preparation process. The ZnO nanoarray on the device is densely distributed, which is beneficial for the piezoelectric output.

3.3. Working Mechanism

Figure 3a,b show the power generating process of the self-powered wearable biosensor. When the liquid is drawn across the surface of ZnO nanoarray, due to the CE (contact electrification) effect, the free electrons in ZnO can move to the vicinity of the contact region between the droplet and ZnO, resulting in charge transfer. Studies have shown that materials with free electrons will be negatively charged due to the solid–liquid contact-electrification on the surface of various materials [40,41,42,43,44]. In the solid–liquid contact between ionic solution and solid has both ion transfer and electron transfer, while the charge transfer between nonionic liquid and solid is substantially contributed to by electron transfer. A slight increase in ion concentration can increase the amount of CE charge. Furthermore, a large amount of excessive ion concentration in the solution can cause electrons to combine with ions, forming a shielding effect, hindering the charge transfer and inhibiting the amount of CE charge [45,46,47,48]. On the surface of ZnO, the transfer of hydrogen ions and electrons is a competitive process, and hydrogen ions inhibit the transfer of electrons between ZnO and water molecules. In contrast, hydroxide ions do not inhibit this process, but promote this process at high concentration [49]. In order to prove this speculation, we carry out subsequent experiments related to hydroxide ions on the surface of ZnO nanoarray.
Figure 3c–f shows the biosensing process of the device. When the device is in contact with sodium bilirubin, an enzymatic reaction between BOx and bilirubin will occur. The reaction is as follows [29]:
B i l i r u b i n + O 2   → B O x   B i l i v e r d i n + H 2 O 2
Furthermore, hydrogen peroxide is oxidized as follows:
H 2 O 2   →   O 2 + 2 H + + 2 e −
The hydrogen ion neutralizes the hydroxide ion in the solution thereby affecting the output voltage of the contact electrification. Figure 3d experimentally confirms that hydroxide ions can indeed affect the output voltage of the device. As the pH value of aqueous solution is 11, 10, 9 and 8, respectively, the change of the output voltage is 0.013, 0.006, 0.005 and 0.001 V. These results prove that the biosensing behavior of the device can be attributed to the coupling of enzymatic reaction and hydrovoltaic effect.

3.4. Sensing Performance

Figure 4 shows the biosensing behavior of the self-powered wearable biosensor in baby diaper. Figure 4a shows the biosensing performance of the device for detecting bilirubin (ZnO nanoarray are modified with bilirubin oxidase). Since bilirubin is insoluble in water, NaOH solution (0.004 mol/L) is usually used to dissolve bilirubin in deionized water [50]. The obtained sodium bilirubin is conjugated bilirubin in the solution for the following tests. As shown in Figure 4a, when the concentration of sodium bilirubin dropped on the surface of the device is 12.5, 25.0, 37.5 and 50.0 mg/L, the output hydrovoltaic voltage (peak value) of the device through contact electrification CE is 0.039, 0.030, 0.019 and 0.008 V, respectively. The output voltage is negatively correlated with the concentration of sodium bilirubin in the solution, as shown in Figure 4b. There is an approximately linear relationship between the output voltage and the concentration of sodium bilirubin. The biosensing response can be simply defined as [51]:
R % = | V i − V 1 V 1 | × 100 %
In Equation (3), Vi and V1 are the output voltage of the device in each concentration and the initial concentration, respectively. As the output voltage is 0.03408, 0.02708, 0.01881 and 0.00914 V (the average peak value of 10 experiments for each concentration), the response is 0.0%, 20.6%, 44.8%, 73.2%, respectively. By fitting the response scatter plot, the linear regression equation can be obtained as y = 0.2438x − 0.263 [52]. In order to eliminate the influence of the primary cell effect, the device is, respectively, immersed in the solution and taken out (the device is wet in air atmosphere). The output voltage of the device is shown in Figure 4c. It can be seen that the output voltage of the device in the solution is much smaller than that in air. This result confirms that the output voltage is mainly dominated by the contact electrification (CE) effect between the solution and nanowires (a kind of hydrovoltaic effect), and the influence of the primary cell effect can be ignored. Figure 4d shows the repeatability of the device. The device is investigated with same concentration of sodium bilirubin solution for four times (one-hour interval for each test). It can be seen that the device can maintain a stable output within a certain period of time. The repetition number of the device can match the utility of the diaper, and it can be thrown away with the diaper.
Specificity is also one of the important indicators of biosensors. The output voltage of our device is only related to the concentration of sodium bilirubin in the solution, and the device can specifically target bilirubin in solution without being affected by other partial substances. Figure 4e–k shows the specificity of the device against sodium bilirubin. The specificity arises from the enzymatic reaction between bilirubin and bilirubin oxidase. Several other typical substances in urine are dropped on the device at different concentrations, and the output voltage almost keeps unchanged. Figure 4e,f show that as the sodium urate concentration is 62.5, 125.0, 187.5 and 250.0 mg/L, the output voltage (peak value) of the device is 0.0270, 0.0315, 0.0278 and 0.0286 V, and the response is 0.0%, 16.7%, 2.9%, 5.9%, respectively. In Figure 4h,j, as the urea concentration in solution is 5.0, 10.0, 15.0 and 20.0 g/L, the output voltage of the device is 0.0083, 0.0100, 0.0083 and 0.0092 V, and the response is 0.0%, 20.4%, 0.2%, 10.8%, respectively. Figure 4j,k show that as the NaCl concentration in solution is 5.0, 10.0, 20.0 and 40.0 g/L, the output voltage of the device is 0.0048, 0.0040, 0.0035 and 0.0042 V, and the response is 0.0%, 2.3%, 3.8%, 1.8%, respectively. The above peak values are all taken from the average value of five experiments at the corresponding concentrations. The results confirm that the output voltage can be slightly influenced by the other substances in urine.
Figure 5a shows the output voltage of the device at different temperature. The temperature has a slight influence on the output of the device. Figure 5b,c show the biosensing behavior of the device against small lactate concentration change. As the sodium bilirubin concentration in solution is 25.0, 27.5, 30.0 and 32.5 mg/L, the output voltage of the device is 0.0299, 0.0261, 0.0238 and 0.0214 V, and the response is 0.0%, 12.7%, 20.5%, 28.4%, respectively. Figure 5d,e show the limit of detection of the device, as the sodium bilirubin concentration in solution is 8.0, 10.0 and 12.5 mg/L, the output voltage of the device is 0.0361, 0.0359 and 0.0334 V, the response is 0.0%, 0.5%, 7.0%, respectively. The lower limit of detection concentration of the device is around 8.0 mg/L. Figure 5f shows that when the approximate urine (97% water, 1.8% urea, 0.05% uric acid, 1.1% inorganic salts and trace amounts of sodium bilirubin at the concentrations indicated) containing different concentrations of sodium bilirubin is dropped on the device, the output of the device changes significantly.

3.5. Practical Application

Figure 6 shows the practical application of the self-powered wearable biosensor in baby diaper for real-time monitoring bilirubin concentration. The device is embedded between the outer cotton cloth and the inner absorbent layer of the diaper. The device must be placed on top of the absorbent layer, otherwise no liquid can flow on the surface of the device. For uploading the biosensing information, the device is connected to an external circuit module, as shown in Figure 6a. The circuit can amplify the sensing signal, and the single-chip microcomputer can perform analog-to-digital conversion and analysis of the signal through voltage converter, shifter and low-pass filter. Then the circuit can control a wireless transmitter for uploading the sensing information. Here, LED lights are used to exhibit the sensing result. As the single-chip microcomputer detects the amplified signal, LED lights can be lightened on. In our experiment, eight LED lights are lined up. The green light indicates that a voltage with a large variation range is detected (>15 mV). Furthermore, the number of red light represents the output voltage (one red light for 5 mV, two red lights for 10 mV, three red lights for 15 mV and so on). As shown in Figure 6b, after dropping sodium bilirubin solution on the diaper, the concentration can be read out from the number of LED lights. As the solution is prepared to simulate urine containing 1.0 mg/L of sodium bilirubin, three red lights are on. In Figure 6c, as the sodium bilirubin concentration in the urine is zero, no red lights are on. These data demonstrate that this system can roughly analyze the bilirubin concentration in urine. In the near future, other wireless transmitters, such as a Bluetooth module, can be integrated into the system. These techniques can transmit sensing information (bilirubin in urine) to the smart phones of babies’ parents. The parents can real-time monitor the baby’s health and will not delay the treatment of neonatal jaundice.

4. Conclusions

In summary, we report a self-powered wearable biosensor in a baby diaper for real-time monitoring neonatal jaundice. The working mechanism is based on the hydrovoltaic-biosensing coupling effect of ZnO nanoarray. The system can work without an external power supply, and the hydrovoltaic output can be treated as the biosensing signal. The biosensor in the diaper can continuously detect bilirubin concentration in urine, and the sensing information can be wirelessly uploaded, which facilitates the parents and doctors treating the neonatal jaundice of baby in time. This self-powered biosensing system can probably expand the scope of intelligent health care.

Author Contributions

Conceptualization, X.X.; methodology, Z.N., Z.L. and L.X.; validation, X.X.; formal analysis, Z.N. and Z.L.; investigation, Z.N.; writing—original draft preparation, Z.N.; writing—review and editing, X.X. and G.Y.; visualization, Z.N. and Z.L.; supervision, X.X.; project administration, X.X.; funding acquisition, L.X. and X.X. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by Sichuan Science and Technology Program No. 2020JDJQ0026 (X.X.) and No. 2021YFG0140 (L.X.).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The experimental data is contained within the article.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Fawaz, R.; Baumann, U.; Ekong, U.; Fischler, B.; Hadzic, N.; Mack, C.L.; Mclin, V.A.; Molleston, J.P.; Neimark, E.; Ng, V.L.; et al. Guideline for the Evaluation of Cholestatic Jaundice in Infants: Joint Recommendations of the North American Society for Pediatric Gastroenterology, Hepatology, and Nutrition and the European Society for Pediatric Gastroenterology, Hepatology, and Nutrition. J. Pediatr. Gastroenterol. Nutr. 2017, 64, 154–168. [Google Scholar] [PubMed]
  2. Christensen, R.D.; Yaish, H.M.; Lemons, R.S. Neonatal Hemolytic Jaundice: Morphologic Features of Erythrocytes That Will Help You Diagnose the Underlying Condition, Neonatology. Neonatology 2014, 105, 243–249. [Google Scholar] [CrossRef] [PubMed]
  3. Rennie, J.; Burman-Roy, S.; Murphy, S. Neonatal jaundice: Summary of NICE guidance. BMJ Br. Med. J. 2010, 340, c2409. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  4. Olusanya, B.O.; Kaplan, M.; Hansen, T.W.R. Neonatal hyperbilirubinaemia: A global perspective, Lancet Child & Adolescent Health. Lancet Child Adolesc. Health 2018, 2, 610–620. [Google Scholar] [PubMed] [Green Version]
  5. Hameed, N.N.; Na’ma, A.M.; Vilms, R.; Bhutani, V.K. Severe Neonatal Hyperbilirubinemia and Adverse Short-Term Consequences in Baghdad, Iraq. Neonatology 2011, 100, 57–63. [Google Scholar] [CrossRef] [PubMed]
  6. Hansen, T.W.R. Prevention of neurodevelopmental sequelae of jaundice in the newborn. Dev. Med. Child Neurol. 2011, 53, 24–28. [Google Scholar] [CrossRef]
  7. Olusanya, B.O.; Teeple, S.; Kassebaum, N.J. The Contribution of Neonatal Jaundice to Global Child Mortality: Findings from the GBD 2016 Study. Pediatrics 2015, 141, e20171471. [Google Scholar] [CrossRef] [Green Version]
  8. Lain, S.J.; Roberts, C.L.; Bowen, J.R.; Nassar, N. Early Discharge of Infants and Risk of Readmission for Jaundice. Pediatrics 2015, 135, 314–321. [Google Scholar] [CrossRef] [Green Version]
  9. Santhosh, M.; Chinnadayyala, S.R.; Kakoti, A.; Goswami, P. Selective and sensitive detection of free bilirubin in blood serum using human serum albumin stabilized gold nanoclusters as fluorometric and colorimetric probe. Biosens. Bioelectron. 2014, 59, 370–376. [Google Scholar] [CrossRef]
  10. Thompson, B.L.; Wyckoff, S.L.; Haverstick, D.M.; Landers, J.P. Simple, Reagentless Quantification of Total Bilirubin in Blood via Microfluidic Phototreatment and Image Analysis. Anal. Chem. 2017, 89, 3228–3234. [Google Scholar] [CrossRef]
  11. Taylor, J.A.; Burgos, A.E.; Flaherman, V.; Chung, E.K.; Simpson, E.A.; Goyal, N.K.; Von Kohorn, I.; Dhepyasuwan, N. Utility of Decision Rules for Transcutaneous Bilirubin Measurements. Pediatrics 2016, 137, e20153032. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  12. Agati, G.; Fusi, F.; Pratesi, S.; Galvan, P.; Donzelli, G.P. Bilirubin photoisomerization products in serum and urine from a Crigler-Najjar type I patient treated by phototherapy. J. Photochem. Photobiol. B Biol. 1998, 47, 181–189. [Google Scholar] [CrossRef]
  13. Thomas, M.; Hardikar, W.; Greaves, R.F.; Tingay, D.G.; Loh, T.P.; Ignjatovic, V.; Newall, F.; Rajapaksa, A.E. Mechanism of bilirubin elimination in urine: Insights and prospects for neonatal jaundice. Clin. Chem. Lab. Med. 2021, 59, 1025–1759. [Google Scholar] [CrossRef] [PubMed]
  14. Tabatabaee, R.S.; Golmohammadi, H.; Ahmadi, S.H. Easy Diagnosis of Jaundice: A Smartphone-Based Nanosensor Bioplatform Using Photoluminescent Bacterial Nanopaper for Point-of-Care Diagnosis of Hyperbilirubinemia. ACS Sens. 2019, 4, 1063–1071. [Google Scholar] [CrossRef] [PubMed]
  15. Ellairaja, S.; Shenbagavalli, K.; Ponmariappan, S.; Vasantha, V.S. A green and facile approach for synthesizing imine to develop optical biosensor for wide range detection of bilirubin in human biofluids. Biosens. Bioelectron. 2017, 91, 82–88. [Google Scholar] [CrossRef]
  16. Anjana, R.R.; Devi, J.S.A.; Jayasree, M.; Aparna, R.S.; Aswathy, B.; Praveen, G.L.; Lekha, G.M.; Sony, G. S,N-doped carbon dots as a fluorescent probe for bilirubin. Microchim. Acta 2018, 185, 11. [Google Scholar] [CrossRef]
  17. Zheng, Z.X.; Feng, Q.L.; Zhu, M.J.; Shang, J.; Li, C.; Kou, L.Z.; Zheng, J.B.; Wang, C.M. Electrochemical sensor for the discrimination of bilirubin in real human blood based on Au nanoparticles/tetrathiafulvalene-carboxylate functionalized reduced graphene oxide 0D-2D heterojunction. Anal. Chim. Acta 2019, 1072, 46–53. [Google Scholar] [CrossRef]
  18. Edachana, R.P.; Kumaresan, A.; Balasubramanian, V.; Thiagarajan, R.; Nair, B.G.; Gopalakrishnan, S.B.T. Paper-based device for the colorimetric assay of bilirubin based on in-situ formation of gold nanoparticles. Microchim. Acta 2020, 187, 60. [Google Scholar] [CrossRef]
  19. Lu, Z.; Zhu, Y.; Jia, C.; Zhao, T.; Bian, M.; Jia, C.; Zhang, Y.; Mao, Y. A Self-Powered Portable Flexible Sensor of Monitoring Speed Skating Techniques. Biosensors 2021, 11, 108. [Google Scholar] [CrossRef]
  20. Mao, Y.; Zhu, Y.; Zhao, T.; Jia, C.; Bian, M.; Li, X.; Liu, Y.; Liu, B. A Portable and Flexible Self-Powered Multifunctional Sensor for Real-Time Monitoring in Swimming. Biosensors 2021, 11, 147. [Google Scholar] [CrossRef]
  21. Park, S.; Heo, S.W.; Lee, W.; Inoue, D.; Jiang, Z.; Yu, K.; Jinno, H.; Hashizume, D.; Sekino, M.; Yokota, T.; et al. Self-powered ultra-flexible electronics via nano-grating-patterned organic photovoltaics. Nature 2018, 561, 516–521. [Google Scholar] [CrossRef] [PubMed]
  22. Guan, X.Y.; Xu, B.G.; Wu, M.J.; Jing, T.T.; Yang, Y.J.; Gao, Y.Y. Breathable, washable and wearable woven-structured triboelectric nanogenerators utilizing electrospun nanofibers for biomechanical energy harvesting and self-powered sensing. Nano Energy 2021, 80, 105549. [Google Scholar] [CrossRef]
  23. Cai, Y.W.; Zhang, X.N.; Wang, G.G.; Li, G.Z.; Zhao, D.Q.; Sun, N.; Li, F.; Zhang, H.Y.; Han, J.C.; Yang, Y. A flexible ultra-sensitive triboelectric tactile sensor of wrinkled PDMS/MXene composite films for E-skin. Nano Energy 2021, 81, 105663. [Google Scholar] [CrossRef]
  24. Guan, H.Y.; Zhong, T.Y.; He, H.X.; Zhao, T.M.; Xing, L.L.; Zhang, Y.; Xue, X.Y. A self-powered wearable sweat-evaporation-biosensing analyzer for building sports big data. Nano Energy 2019, 59, 741–761. [Google Scholar] [CrossRef]
  25. Zhang, W.L.H.; Guan, H.Y.; Zhong, T.Y.; Zhao, T.M.; Xing, L.L.; Xue, X.Y. Wearable Battery-Free Perspiration Analyzing Sites Based on Sweat Flowing on ZnO Nanoarrays. Nano Micro Lett. 2020, 12, 105. [Google Scholar] [CrossRef] [PubMed]
  26. Zhong, T.Y.; Li, H.X.; Zhao, T.M.; Guan, H.Y.; Xing, L.L.; Xue, X.Y. Self-powered/self-cleaned atmosphere monitoring system from combining hydrovoltaic, gas sensing and photocatalytic effects of TiO2 nanoparticles. J. Mater. Sci. Technol. 2021, 76, 33–40. [Google Scholar] [CrossRef]
  27. Li, H.X.; Dong, W.; Xi, J.H.; Li, Z.D.; Wu, X.; Ji, Z.G. Hydropowered photoelectrochemical water splitting solar cell for hydrogen production. J. Alloys Compd. 2017, 691, 750–754. [Google Scholar] [CrossRef]
  28. Han, W.X.; He, H.X.; Zhang, L.L.; Dong, C.Y.; Zeng, H.; Dai, Y.T.; Xing, L.L.; Zhang, Y.; Xue, X.Y. A Self-Powered Wearable Noninvasive Electronic-Skin for Perspiration Analysis Based on Piezo-Biosensing Unit Matrix of Enzyme/ZnO Nanoarrays. ACS Appl. Mater. Interfaces 2017, 9, 29526–29537. [Google Scholar] [CrossRef]
  29. Fortuney, A.; Guilbault, G.G. Enzyme electrode for the determination of bilirubin. Electroanalysis 1996, 8, 229–232. [Google Scholar] [CrossRef]
  30. Shoham, B.; Migron, Y.; Riklin, A.; Willner, I.; Tartakovsky, B. A bilirubin biosensor based on a multilayer network enzyme electrode. Biosens. Bioelectron. 1995, 10, 341–352. [Google Scholar] [CrossRef]
  31. Fathi, P.; Moitra, P.; McDonald, M.M.; Esch, M.B.; Pan, D. Near-infrared emitting dual-stimuli-responsive carbon dots from endogenous bile pigments. Nanoscale 2021, 13, 13487–13496. [Google Scholar] [CrossRef] [PubMed]
  32. Li, X.M.; Shen, C.; Wang, Q.; Luk, C.M.; Li, B.W.; Yin, J.; Lau, S.P.; Guo, W.L. Hydroelectric generator from transparent flexible zinc oxide nanofilms. Nano Energy 2017, 32, 125–129. [Google Scholar] [CrossRef]
  33. Guan, H.Y.; Mao, G.J.; Zhong, T.Y.; Zhao, T.M.; Liang, S.; Xing, L.L.; Xue, X.Y. A self-powered UV photodetector based on the hydrovoltaic and photoelectric coupling properties of ZnO nanowire arrays. J. Alloys Compd. 2021, 867, 159073. [Google Scholar] [CrossRef]
  34. Politi, J.; Rea, I.; Dardano, P.; De Stefano, L.; Gioffre, M. Versatile synthesis of ZnO nanowires for quantitative optical sensing of molecular biorecognition. Sens. Actuators B 2015, 220, 705–711. [Google Scholar] [CrossRef]
  35. Xue, X.Y.; Qu, Z.; Fu, Y.M.; Yu, B.W.; Xing, L.L.; Zhang, Y. Self-powered electronic-skin for detecting glucose level in body fluid basing on piezo-enzymatic-reaction coupling process. Nano Energy 2016, 26, 148–156. [Google Scholar] [CrossRef]
  36. Yu, J.C.; Zhang, Y.J.; Liu, S.Q. Enzymatic reactivity of glucose oxidase confined in nanochannels. Biosens. Bioelectron. 2014, 55, 307–312. [Google Scholar] [CrossRef]
  37. Viry, L.; Levi, A.; Totaro, M.; Mondini, A.; Mattoli, V.; Mazzolai, B.; Beccai, L. Flexible Three-Axial Force Sensor for Soft and Highly Sensitive Artificial Touch. Adv. Mater. 2014, 26, 2659–2664. [Google Scholar] [CrossRef] [Green Version]
  38. Li, Z.; Yang, R.S.; Yu, M.; Bai, F.; Li, C.; Wang, Z.L. Cellular Level Biocompatibility and Biosafety of ZnO Nanowires. J. Phys. Chem. C 2008, 112, 20114–20117. [Google Scholar] [CrossRef] [Green Version]
  39. Gopikrishnan, R.; Zhang, K.; Ravichandran, P.; Baluchamy, S.; Ramesh, V.; Biradar, S.; Ramesh, P.; Pradhan, J.; Hall, J.C.; Pradhan, A.K.; et al. Synthesis, Characterization and Biocompatibility Studies of Zinc oxide (ZnO) Nanorods for Biomedical Application. Nano-Micro Lett. 2010, 2, 31–36. [Google Scholar] [CrossRef]
  40. Choi, D.; Kim, D.W.; Yoo, D.; Cha, K.J.; La, M.; Kim, D.S. Spontaneous occurrence of liquid-solid contact electrification in nature: Toward a robust triboelectric nanogenerator inspired by the natural lotus leaf. Nano Energy 2017, 36, 250–259. [Google Scholar] [CrossRef]
  41. Yang, X.; Chan, S.; Wang, L.; Daoud, W.A. Water tank triboelectric nanogenerator for efficient harvesting of water wave energy over a broad frequency range. Nano Energy 2018, 44, 388–398. [Google Scholar] [CrossRef]
  42. Su, Y.; Wen, X.; Zhu, G.; Yang, J.; Chen, J.; Bai, P.; Wu, Z.; Jiang, Y.; Wang, Z.L. Hybrid triboelectric nanogenerator for harvesting water wave energy and as a self-powered distress signal emitter. Nano Energy 2014, 9, 186–195. [Google Scholar] [CrossRef] [Green Version]
  43. Zhu, G.; Su, Y.; Bai, P.; Chen, J.; Jing, Q.; Yang, W.; Wang, Z.L. Harvesting Water Wave Energy by Asymmetric Screening of Electrostatic Charges on a Nanostructured Hydrophobic Thin-Film Surface. ACS Nano 2014, 8, 6031–6037. [Google Scholar] [CrossRef] [PubMed]
  44. Singh, H.H.; Khare, N. KPFM Study of Flexible Ferroelectric Polymer/Water Interface for Understanding the Working Principle of Liquid-Solid Triboelectric Nanogenerator. Adv. Mater. Interfaces 2021, 8, 2100032. [Google Scholar] [CrossRef]
  45. Lin, S.Q.; Xu, L.; Wang, A.C.; Wang, Z.L. Quantifying electron-transfer in liquid-solid contact electrification and the formation of electric double-layer. Nat. Commun. 2020, 11, 399. [Google Scholar] [CrossRef] [Green Version]
  46. Wang, Z.L.; Wang, A.C. On the origin of contact-electrification. Mater. Today 2019, 30, 34–51. [Google Scholar] [CrossRef]
  47. Zhang, L.Q.; Li, X.J.; Zhang, Y.L.; Feng, Y.G.; Zhou, F.; Wang, D. Regulation and influence factors of triboelectricity at the solid-liquid interface. Nano Energy 2020, 78, 105370. [Google Scholar] [CrossRef]
  48. Lin, S.Q.; Zheng, M.L.; Luo, J.J.; Wang, Z.L. Effects of Surface Functional Groups on Electron Transfer at Liquid-Solid Interfacial Contact Electrification. ACS Nano 2020, 14, 10733–10741. [Google Scholar] [CrossRef]
  49. Nie, J.H.; Ren, Z.W.; Xu, L.; Lin, S.Q.; Zhan, F.; Chen, X.Y.; Wang, Z.L. Probing Contact-Electrification-Induced Electron and Ion Transfers at a Liquid-Solid Interface. Adv. Mater. 2019, 32, 1905696. [Google Scholar] [CrossRef]
  50. Bell, J.G.; Mousavi, M.P.S.; Abd El-Rahmana, M.K.; Tan, E.K.W.; Homer-Vanniasinkam, S.; Whitesides, G.M. Paper-based potentiometric sensing of free bilirubin in blood serum. Biosens. Bioelectron. 2019, 126, 115–121. [Google Scholar] [CrossRef]
  51. Guan, H.Y.; Lv, D.; Zhong, T.Y.; Dai, Y.T.; Xing, L.L.; Xue, X.Y.; Zhang, Y.; Zhan, Y. Self-powered, wireless-control, neural-stimulating electronic skin for in vivo characterization of synaptic plasticity. Nano Energy 2020, 67, 104182. [Google Scholar] [CrossRef]
  52. Zhao, Y.Y.; Deng, P.; Nie, Y.X.; Wang, P.L.; Zhang, Y.; Xing, L.L.; Xue, X.Y. Biomolecule-adsorption-dependent piezoelectric output of ZnO nanowire nanogenerator and its application as self-powered active biosensor. Biosens. Bioelectron. 2014, 57, 269–275. [Google Scholar] [CrossRef] [PubMed]
Biosensors 12 00164 g001 550
Figure 1. (a) The experimental design of self-powered wearable biosensor in baby diaper for monitoring neonatal jaundice. (b) Manufacturing process of ZnO nanoarray on PDMS film.
Figure 1. (a) The experimental design of self-powered wearable biosensor in baby diaper for monitoring neonatal jaundice. (b) Manufacturing process of ZnO nanoarray on PDMS film.
Biosensors 12 00164 g001
Biosensors 12 00164 g002 550
Figure 2. Morphology and microstructure of the self-powered wearable biosensor in baby diaper. (a) Side view of the flexible device. (b) Top view of the device. (c,d) The device embedded in baby diaper. (e–h) SEM images of ZnO nanoarray.
Figure 2. Morphology and microstructure of the self-powered wearable biosensor in baby diaper. (a) Side view of the flexible device. (b) Top view of the device. (c,d) The device embedded in baby diaper. (e–h) SEM images of ZnO nanoarray.
Biosensors 12 00164 g002
Biosensors 12 00164 g003 550
Figure 3. The working mechanism of the self-powered wearable biosensor. (a,b) The power generating process. (c) Molecular flowing along ZnO nanowire. (d) The output voltage of the device in different pH value aqueous solution. (e,f) The biosensing process for detecting bilirubin.
Figure 3. The working mechanism of the self-powered wearable biosensor. (a,b) The power generating process. (c) Molecular flowing along ZnO nanowire. (d) The output voltage of the device in different pH value aqueous solution. (e,f) The biosensing process for detecting bilirubin.
Biosensors 12 00164 g003
Biosensors 12 00164 g004 550
Figure 4. (a) The sodium bilirubin biosensing performance of the self-powered wearable biosensor. (b) The response of the device. (c) Control experiment of the device eliminate primary cell effect. (d) The repeatability of the device. (e–k) The response of the device against sodium urate, urea and NaCl.
Figure 4. (a) The sodium bilirubin biosensing performance of the self-powered wearable biosensor. (b) The response of the device. (c) Control experiment of the device eliminate primary cell effect. (d) The repeatability of the device. (e–k) The response of the device against sodium urate, urea and NaCl.
Biosensors 12 00164 g004
Biosensors 12 00164 g005 550
Figure 5. (a) The output of the device at different temperatures. (b,c) The biosensing behavior and response of the device against small lactate concentration change. (d,e) The limit of detection of the device. (f) The biosensing behavior of the device in mixed solution (approximately urine).
Figure 5. (a) The output of the device at different temperatures. (b,c) The biosensing behavior and response of the device against small lactate concentration change. (d,e) The limit of detection of the device. (f) The biosensing behavior of the device in mixed solution (approximately urine).
Biosensors 12 00164 g005
Biosensors 12 00164 g006 550
Figure 6. (a) Circuit diagram for sensing information transmission. (b,c) After dropping sodium bilirubin solution on the diaper, the concentration can be read out from the number of LED lights.
Figure 6. (a) Circuit diagram for sensing information transmission. (b,c) After dropping sodium bilirubin solution on the diaper, the concentration can be read out from the number of LED lights.
Biosensors 12 00164 g006
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Ning, Z.; Long, Z.; Yang, G.; Xing, L.; Xue, X. Self-Powered Wearable Biosensor in a Baby Diaper for Monitoring Neonatal Jaundice through a Hydrovoltaic-Biosensing Coupling Effect of ZnO Nanoarray. Biosensors 2022, 12, 164. https://0-doi-org.brum.beds.ac.uk/10.3390/bios12030164

AMA Style

Ning Z, Long Z, Yang G, Xing L, Xue X. Self-Powered Wearable Biosensor in a Baby Diaper for Monitoring Neonatal Jaundice through a Hydrovoltaic-Biosensing Coupling Effect of ZnO Nanoarray. Biosensors. 2022; 12(3):164. https://0-doi-org.brum.beds.ac.uk/10.3390/bios12030164

Chicago/Turabian Style

Ning, Zirui, Zhihe Long, Guangyou Yang, Lili Xing, and Xinyu Xue. 2022. "Self-Powered Wearable Biosensor in a Baby Diaper for Monitoring Neonatal Jaundice through a Hydrovoltaic-Biosensing Coupling Effect of ZnO Nanoarray" Biosensors 12, no. 3: 164. https://0-doi-org.brum.beds.ac.uk/10.3390/bios12030164

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop