Next Article in Journal
Toward Smart Communication Components: Recent Advances in Human and AI Speaker Interaction
Previous Article in Journal
A Triple Relation Network for Joint Entity and Relation Extraction
Previous Article in Special Issue
A Novel Single-Stage Common-Ground Transformerless Buck–Boost Inverter
 
 
Article
Peer-Review Record

Real Time Power Control in a High Voltage Power Supply for Dielectric Barrier Discharge Reactors: Implementation Strategy and Load Thermal Analysis

by Gabriele Neretti *, Arturo Popoli, Silvia Giuditta Scaltriti and Andrea Cristofolini
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Submission received: 12 April 2022 / Revised: 6 May 2022 / Accepted: 9 May 2022 / Published: 11 May 2022
(This article belongs to the Special Issue Innovative Technologies in Power Converters)

Round 1

Reviewer 1 Report

1- What are the main contributions of the manuscript? It must be given as items in the introduction.

2-The abstract must be rewritten by supporting the  obtained results.

3- Literature study must be done.

4- References must be updated.

Author Response

Please see attached file

Author Response File: Author Response.pdf

Reviewer 2 Report

The manuscript entitled 'Real time power control in a high voltage power supply for Dielectric Barrier Discharge reactors: implementation strategy and load thermal analysis' has been completely reviewed. I have some suggestions that may help to improve the paper quality further:
1- In abstract, the gap between the literature and this paper is not mentioned. Authors only stated that a control strategy to ensure constant average power operation of the device used in this paper. What is the strategy?
2- Does your focus on real time power control in a high voltage power supply or topologies or any new method or results which have new prominent advantages compared to other approaches of controlling systems?
3- How do you argue that this method works in other reactors with nonlinear and time dependent loads? For instance, what is the fundamental difference between balanced and unbalanced loads in push-pull converters that makes your article unique?
4- A significant advantage and results are not observed from the simulation to reflect the performance of the presented open loop or controlled operation strategies. What is the main contribution of the analysis in this work?
5- Where do the values of the high voltage Vout and charge QCm waveforms in Figure 5 come from?
6- A minor English editing is needed.
7- In conclusion, it is better to provide the main motivation, contribution and results of the paper. Please rewrite this section.

 

Author Response

please see attached file

Author Response File: Author Response.pdf

Round 2

Reviewer 2 Report

Thanks for response and clarifications.

Back to TopTop