Next Article in Journal
An Observation Capability Metadata Model for EO Sensor Discovery in Sensor Web Enablement Environments
Next Article in Special Issue
Landsat 8 Operational Land Imager On-Orbit Geometric Calibration and Performance
Previous Article in Journal
A Procedure to Map Subsidence at the Regional Scale Using the Persistent Scatterer Interferometry (PSI) Technique
Previous Article in Special Issue
Stray Light Artifacts in Imagery from the Landsat 8 Thermal Infrared Sensor
Article

An Analysis of the Side Slither On-Orbit Calibration Technique Using the DIRSIG Model

1
Chester F. Carlson Center for Imaging Science, Rochester Institute of Technology, 54 Lomb Memorial Drive, Rochester, NY 14624, USA
2
Sigma Space Corporation, NASA Goddard Space Flight Center, 8800 Greenbelt Rd., Greenbelt, MD 20771, USA
*
Author to whom correspondence should be addressed.
Remote Sens. 2014, 6(11), 10523-10545; https://0-doi-org.brum.beds.ac.uk/10.3390/rs61110523
Received: 31 July 2014 / Revised: 9 October 2014 / Accepted: 11 October 2014 / Published: 31 October 2014
(This article belongs to the Special Issue Landsat-8 Sensor Characterization and Calibration)
Pushbroom-style imaging systems exhibit several advantages over line scanners when used on space-borne platforms as they typically achieve higher signal-to-noise and reduce the need for moving parts. Pushbroom sensors contain thousands of detectors, each having a unique radiometric response, which will inevitably lead to streaking and banding in the raw data. To take full advantage of the potential exhibited by pushbroom sensors, a relative radiometric correction must be performed to eliminate pixel-to-pixel non-uniformities in the raw data. Side slither is an on-orbit calibration technique where a 90-degree yaw maneuver is performed over an invariant site to flatten the data. While this technique has been utilized with moderate success for the QuickBird satellite [1] and the RapidEye constellation [2], further analysis is required to enable its implementation for the Landsat 8 sensors, which have a 15-degree field-of-view and a 0.5% pixel-to-pixel uniformity requirement. This work uses the DIRSIG model to analyze the side slither maneuver as applicable to the Landsat sensor. A description of favorable sites, how to adjust the maneuver to compensate for the curvature of “linear” arrays, how to efficiently process the data, and an analysis to assess the quality of the side slither data, are presented. View Full-Text
Keywords: side slither; 90 degree yaw; Landsat 8; OLI; TIRS; DIRSIG; calibration side slither; 90 degree yaw; Landsat 8; OLI; TIRS; DIRSIG; calibration
Show Figures

Graphical abstract

MDPI and ACS Style

Gerace, A.; Schott, J.; Gartley, M.; Montanaro, M. An Analysis of the Side Slither On-Orbit Calibration Technique Using the DIRSIG Model. Remote Sens. 2014, 6, 10523-10545. https://0-doi-org.brum.beds.ac.uk/10.3390/rs61110523

AMA Style

Gerace A, Schott J, Gartley M, Montanaro M. An Analysis of the Side Slither On-Orbit Calibration Technique Using the DIRSIG Model. Remote Sensing. 2014; 6(11):10523-10545. https://0-doi-org.brum.beds.ac.uk/10.3390/rs61110523

Chicago/Turabian Style

Gerace, Aaron, John Schott, Michael Gartley, and Matthew Montanaro. 2014. "An Analysis of the Side Slither On-Orbit Calibration Technique Using the DIRSIG Model" Remote Sensing 6, no. 11: 10523-10545. https://0-doi-org.brum.beds.ac.uk/10.3390/rs61110523

Find Other Styles

Article Access Map by Country/Region

1
Only visits after 24 November 2015 are recorded.
Back to TopTop