Based on the above, this Special Issue aimed to amass state-of-the-art research contributions that address challenges in the design, dimensioning, and optimization of emerging 5G networks. After a rigorous review process, 16 papers were ultimately accepted for publication in this Special Issue, covering a range of important and well-timed subject areas.
The first paper, authored by I. Sousa, N. Sousa, M. Queluz, and A. Rodrigues, proposes a methodology for the evaluation and comparison of the performance of microwave radio transmission, free-space optics, and fiber optic technologies in the Cloud Radio Access Network (C-RAN) fronthaul segment, assuming different weather conditions, link lengths, and bit rate requirements [
1]. Such a methodology enables the determination of the most cost-effective solution for each remote radio head (RRH)–baseband unit (BBU) link and the computation of the required number of BBUs. The second paper, authored by W. Lee, E. Suk Suh, W. Kwak, and H. Han, analyzes via simulation three different 5G communication network architectures—namely, the centralized cloud computing architecture, the multiaccess edge computing architecture, and the proposed Hybrid Cloud Computing (HCC) architecture, in terms of their response capability under normal and disruptive data traffic conditions [
2]. The behavior of the abovementioned architectures was assessed using actual data traffic patterns obtained from the field, while the results obtained were used to quantify the advantages and disadvantages of each architecture and demonstrated the benefit of the new HCC architecture. The third paper, authored by K. Arshid, I. Hussain, M. Bashir, S. Naseem, A. Ditta, N. Mian, M. Zahid, and I. Khan, proposes a primary user traffic pattern-based opportunistic spectrum handoff (PUTPOSH) scheme for cognitive radio networks (CRNs) [
3]. The proposed scheme permits a cognitive radio user to sense the primary user’s traffic through energy-efficient sensing and then adopt a proactive or reactive handoff strategy according to the interarrival rate. Simulation results show that PUTPOSH maximizes the channel utilization and the throughput and, at the same time, minimizes the overall service time and the number of handoffs in CRNs. The fourth paper, authored by A. Alhammadi, M. Roslee, M. Alias, I. Shayea, and A. Alquhali, proposes a velocity-based self-optimization algorithm to adjust the handover control parameters in 4G/5G networks [
4]. The proposed algorithm utilizes the user’s received power and speed to adjust the handover margin and the time to trigger during the user’s mobility in the network. Based on simulation results, the authors show that the proposed self-optimization algorithm reduces the rate of ping-pong handovers and radio link failure, compared with other existing algorithms. The fifth paper, authored by Z. Zakrzewski, proposes a solution for enabling the coexistence of digitized radio-over-fiber and analog radio-over-fiber interfaces operating in the optical fronthaul of 5G mobile systems [
5]. The sixth paper, authored by X. Li, C. Guo, J. Xu, L. Gupta, and R. Jain, studies the interesting subject of 5G network slices provisioning by taking into account both the slice node provisioning and the slice link provisioning aspects [
6]. More specifically, the authors propose a two-stage heuristic slice provisioning algorithm for the 5G core network by jointly considering network resource attributes and topology attributes. Extensive simulation results show that the proposed algorithm increases the slice request acceptance ratio and, consequently, the revenue of the network infrastructure provider. The seventh paper, authored by M. Waqar and A. Kim, proposes and studies via simulation the end-to-end latency-aware path computation scheme, to improve the link utilization of capacity constraint Ethernet-based fronthaul bridged networks (EFBNs) in 5G C-RANs [
7]. More specifically, the authors consider the queuing delays and end-to-end latencies for the selection of the optimal paths for individual enhanced Common Public Radio Interface (eCPRI) traffic streams in the EFBNs. In addition, they propose a packet forwarding mechanism that maximizes the transmissions of multiple eCPRI streams at tolerable latencies and improves the link distances between the RRHs and the BBU pool. The eighth paper, authored by M. Głąbowski, A. Kaliszan, and M. Stasiak, proposes a method for the determination of the probability of strictly determined multiservice resources in a group of resources [
8]. The proposed method allows the authors to elaborate a new formula for calculating the blocking probability of strictly determined resources in systems servicing multiservice traffic, e.g., in a group of cells in 4G and 5G systems. The proposed formula, whose accuracy is verified via simulation, is an extension of the well-known Palm–Jacobaeus loss formula elaborated for systems with single-rate traffic. The ninth paper, authored by P. Panagoulias, I. Moscholios, P. Sarigiannidis, M. Głąbowski, and M. Logothetis, studies both analytically and through simulation the downlink of an orthogonal frequency division multiplexing based cell that services multirate traffic [
9]. The call arrival process is random (Poisson) or quasi-random. To determine congestion probabilities and resource utilization, the cell is modeled as a multirate loss model, while the call admission is based on three different policies—restricted accessibility, bandwidth reservation, and complete sharing policies. In all three policies, recursive formulas are proposed for the determination of the various performance measures. The 10th paper, authored by Q. Zhu, W. Huang, K. Mao, W. Zhong, B. Hua, X. Chen, and Z. Zhao, proposes a discrete, non-stationary, multiple-input–multiple-output (MIMO) channel model suitable for the fixed-point realization on the field-programmable gate array (FPGA) hardware platform [
10]. To this end, the authors develop a flexible hardware architecture with configurable channel parameters and implement it on a non-stationary MIMO channel emulator in a single FPGA chip. In addition, an improved non-stationary channel emulation method is employed to guarantee accurate channel fading and phase, and the schemes of other key modules are also illustrated and implemented in a single FPGA chip. Hardware tests presented by the authors show that the output statistical properties of the proposed MIMO channel emulator agree well with the corresponding theoretical ones. The 11th paper, authored by B. Seok, J. Sicato, T. Erzhena, C. Xuan, Y. Pan, and J. Park, studies and analyzes existing results about secure device-to-device (D2D) communication systems in terms of their security considerations and limitations [
11]. In addition, a secure D2D communication system is proposed with the aim to address the security challenges and limitations of the existing results. The proposed secure D2D communication system was designed based on elliptic curve cryptography and lightweight authenticated encryption with associated data ciphers to cover resource-constrained IoT devices. The 12th paper, authored by K. Mohamed, M. Alias, and M. Roslee, studies the applicability of time division multiple access beamforming for future communication systems [
12]. The authors propose the Sl-beamforming scheme for line-of-sight small cell systems in the LTE architecture. Simulation results show that the proposed scheme enhances the network signal to interference plus noise ratio and user average throughput, compared with non-dominantly interfered region schemes. The 13th paper, authored by Z. Sun and Y. Zhao, proposes a novel time-varying least mean square adaptive filtering algorithm, with the aim to cancel the self-interference of near-end transceivers in co-frequency co-time full-duplex (CCFD) systems of the radio frequency domain [
13]. The proposed algorithm solves the problem of strong self-interference of the radio frequency domain in CCFD systems by cooperatively controlling the autocorrelation values between the time factor and the error signal, to update the step size of the algorithm and provide a better quality of service for 5G communication networks. The 14th paper, authored by R. Aly, A. Zaki, W. Badawi, and M. Aly, proposes a space-time, coded, orthogonal transform division multiplexing (STC OTDM) technique for 5G applications [
14]. The proposed system enhances the data rate and performance of the orthogonal transform division multiplexing (OTDM) technique and is based on using space-time coding (STC) with OTDM, to increase the system diversity and consequently the system performance. Simulation results provided by the authors show that the proposed technique achieves better performance when compared with other multicarrier techniques. The 15th paper, authored by L. Wen, R. Razavi, and J. Lei, analyzes the intrinsic interference of filter bank-based multicarrier systems with isotropic orthogonal transfer algorithm pulse-shaping [
15]. Such intrinsic interference is treated as a parity symbol and an iterative soft-in-soft-out detector, which is based on a message-passing algorithm, is proposed to exploit the useful information of the intrinsic interference. Finally, the last paper, authored by T. Tran, A. Ngoc, and N. Doan, presents an augmented Lagrangian-based alternating-direction inexact Newton (ALADIN) method in order to estimate the Laplacian spectrum in a decentralized scheme for dynamic controlled networks [
16]. The key feature of this paper is a direct solution to non-convex optimization for Laplacian spectrum estimation using the proposed ALADIN method.