Micro, Volume 4, Issue 2 (June 2024) – 5 articles

This study evaluated the potential of gelatin methacryloyl (GelMA) for single-cell screening compared to polyethylene glycol diacrylate (PEGDA). GelMA photopolymerized at 1000–2000 mJ/cm² produced consistent patterns and supported HeLa cell viability. GelMA (5%w/v) facilitated better cell collection within 2 days due to its shape retention. GelMA demonstrated biocompatibility with HeLa cells exhibiting exponential proliferation and biodegradation over 5 days. The average cell displacement over 2 days was 16 µm. Two targeted cell recovery strategies using trypsin were developed: one for adherent cells encapsulated at 800 mJ/cm², and another for floating cells encapsulated at 800 mJ/cm², enabling the selective removal of unwanted cells. These findings suggest GelMA as a promising biomaterial for single-cell screening applications, offering advantages over PEGDA in cell encapsulation and targeted recovery. Full article

Additive manufacturing (AM) is an advanced manufacturing method that produces objects by sequential layering. Material extrusion AM (MEAM) with continuous-fibre reinforcement is becoming more widely used in naval structures, which are exposed to the marine environment. However, the water diffusion process and the effect of water ageing on the mechanical performance of AM materials are not yet well understood because of their complex internal structure, caused by defects generated during manufacturing. Current research on diffusion is mostly based on experimental methods for conventionally manufactured materials without considering AM-induced defects. The objective of this study is to explore how the defects inherent to MEAM affect water diffusion in a composite material by the capillary effect. Results from a numerical study of capillary flow in MEAM polymer are applied as a boundary condition in the subsequent finite-element analysis. The study illustrates that flow in the capillary reaches the steady state quicker compared to the saturation time in the matrix, predicted by Fick’s diffusion equation. It is demonstrated that the capillary effect can significantly affect the water diffusion in MEAM parts and reduce the saturation time to one-third compared to the case without accounting for this effect. Full article

The advancement of both porous materials and nanomaterials has brought about porous nanomaterials. These new materials present advantages both due to their porosity and nano-size: small size apt for micro/nano device integration or in vivo transport, large surface area for guest/target molecule adsorption and interaction, porous channels providing accessibility to active/surface sites, and exposed reactive surface/active sites induced by uncoordinated bonds. These properties prove useful for the development of different porous composition types (metal oxides, silica, zeolites, amorphous oxides, nanoarrays, precious metals, non-precious metals, MOFs, carbon nanostructures, MXenes, and others) through different synthetic procedures—templating, colloidal synthesis, hydrothermal approach, sol-gel route, self-assembly, dealloying, galvanostatic replacement, and so—for different applications, such as catalysis (water-splitting, etc.), biosensing, energy storage (batteries, supercapacitors), actuators, SERS, and bio applications. Here, these are presented according to different material types showing the evolution of the structure design and development towards the formation of hierarchical porous structures, emphasizing that the formation of porous nanostructures came about out of the desire and need to form hierarchical porous nanostructures. Common trends observed across these different composition types include similar (aforementioned) applications and the use of porous nanomaterials as templates/precursors to create novel ones. Towards the end, a discussion on the link between technological advancements and the development of porous nanomaterials paves the way to present future perspectives on these nanomaterials and their hierarchical porous architectures. Together with a summary, these are given in the conclusion. Full article

Magnetic micro and nano sensors can be used in a broad variety of applications, e.g., for navigation, automotives, smartphones and also for health monitoring. Based on physical effects such as the well-known magnetic induction, the Hall effect, tunnel magnetoresistance and giant magnetoresistance, they can be used to measure positions, flow, pressure and other physical properties. In biomedicine and healthcare, these miniaturized sensors can be either integrated into garments and other wearables, be directed through the body by passive capsules or active micro-robots or be implanted, which usually necessitates bio-functionalization and avoiding cell-toxic materials. This review describes the physical effects that can be applied in these sensors and discusses the most recent micro and nano sensors developed for healthcare applications. Full article

This study describes the synthesis and characterization of the lead-free organic ferroelectric perovskite N-methyl-N’-diazabicyclo [2.2.2]octonium)-ammonium trichloride (MDABCO-NH₄Cl₃). The electrospinning technique was employed to obtain nanofibers embedded with this perovskite in a PVC polymer for hybrid fiber production. The dielectric, piezoelectric, and pyroelectric properties of these fibers were carefully examined. Based on measurements of the dielectric permittivity temperature and frequency dependence, together with the pyroelectric results, a transition from a high temperature paraelectric to a ferroelectric phase that persisted at room temperature was found to occur at 438 K. The measured pyroelectric coefficient yielded values as high as 290 μC K⁻¹ m⁻², which is in between the values reported for MDABCO-NH₄I₃ and the semiorganic ferroelectric triglycine sulfate (TGS)_. The hybrid nanofibers exhibited good morphological characteristics and demonstrated very good piezoelectric properties. Specifically, a piezoelectric coefficient of 42 pC/N was obtained when applying a periodical force of 3 N and a piezoelectric voltage coefficient of g_eff = 0.65 V mN⁻¹. The performance of these fibers is on par with that of materials discussed in the existing literature for the fabrication of nano energy-harvesting generators. Importantly, the perovskite nanocrystals within the fibers are protected from degradation by the surrounding polymer, making them a promising environmentally friendly platform for flexible mechanical energy harvesting. Full article