Dear Colleagues,

Tower-technology-based concentrated solar power (CSP) promises to deliver electricity prices below 7.3 ¢ per kW h based on thermal energy storage and future renewable-energy harvesting technology. However, the energy price depends very much on the energy-transformation efficiency, where absorber coatings play a crucial role. CSP technology requires materials that can endure high operating temperatures in air, thermal shocks, oxidative and corrosive environment, and abrasion during their lifetime.

For a central receiver system, concentrated solar radiation is directed at a central absorber, with the concentration factor reaching as high as 1000 suns; therefore, receiver peak temperatures are expected to approach 800 °C. As temperatures are raised, heat loss to re-radiation strongly impacts plant efficiency. This phenomenon can be bridged through the development of selective coatings, resulting in low thermal emission.

The manufacture, design, and test of high-performance absorber materials that possess high solar absorptivity, low thermal emissivity, durability, longievity, and are capable of serving as physical protection layers for underlaying alloy material at 800 °C in air atmosphere are opportunites for coating development.

This Special Issue of Coatings is intended to provide a forum for original research articles as well as critical reviews on current advances in the field of absorber coatings for CSP technologies.

Areas of interest include but are not limited to:

• High solar absorptivity absorber coatigs for central tower technologies;
• Theoretical and experimental research, knowledge and new ideas in the fields of pigments, binders, additives, application technique, curing, re-coating, evaluation under working conditions, environmental impact, etc.;
• Understanding the degradation mechanisms of coatings reflected through optical properties, thermal conductivity, thermal load, etc.;
• Latest development of test methods considering optical, mechanical, and thermal properties and the ability to test and predict properties by computer modeling or simulation after diferent loads equivalent to service environment;
• Multilayered coatings, ceramic materials, diffusion, and protection layers.

Assist. Prof. Dr. Ivan Jerman
Prof. Dr. Franci Merzel
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Coatings is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

• High solar absorptivity coatings
• Concentrated solar power
• Longevity
• Performance modeling