Topic Editors

NIBEC, Ulster University, Newtownabbey BT37 0QB, Northern Ireland, UK
School of Engineering, Institute for Infrastructure and Environment, University of Edinburgh, Edinburgh, UK
Dr. Leónidas Pérez Estrada
Department of Sustainability, EURECAT Technology Center of Catalonia, Plaça de la Ciencia 2, Manresa, Barcelona, Spain

Advanced Oxidation Processes (AOPs) in the Circular Economy

Abstract submission deadline
closed (31 January 2023)
Manuscript submission deadline
closed (30 April 2023)
Viewed by
3349

Topic Information

Dear Colleagues,

As we work towards the elimination of waste and the continual use of resources through a circular economy approach, technologies such as Advanced Oxidation Processes (AOPs) will play a key enabling role in creating value and resources in areas such as water purification, wastewater reuse, clean energy production, carbon capture and green chemistry. This Topic bridges the gaps in catalysis and the circular economy, demonstrating the synergy and interdependence of these subject areas—only through interdisciplinary collaborations can we work to ensure pure and applied research addresses sustainable development and drives economic growth. We welcome papers from all remits of the above areas and AOPs, in particular, manuscripts describing novel catalysts and reactor configurations, the use of solar energy, scale-up studies, the conversion of waste to fuel and/or chemical precursors, water splitting, carbon dioxide sequestration, hydrogen production, life-cycle analysis, resource generation, water treatment and water reuse.

Dr. Patrick Dunlop
Dr. Efthalia Chatzisymeon
Dr. Leónidas Pérez Estrada
Topic Editors

Keywords

  • photocatalysis
  • electrolysis
  • resource recovery
  • Fenton process
  • water reclamation
  • life cycle assessment
  • sustainability assessment
  • catalytic oxidation

Participating Journals

Journal Name Impact Factor CiteScore Launched Year First Decision (median) APC
Applied Sciences
applsci
2.7 4.5 2011 16.9 Days CHF 2400
Catalysts
catalysts
3.9 6.3 2011 14.3 Days CHF 2700
Clean Technologies
cleantechnol
3.8 4.5 2019 26.6 Days CHF 1600
Processes
processes
3.5 4.7 2013 13.7 Days CHF 2400
Water
water
3.4 5.5 2009 16.5 Days CHF 2600

Preprints.org is a multidiscipline platform providing preprint service that is dedicated to sharing your research from the start and empowering your research journey.

MDPI Topics is cooperating with Preprints.org and has built a direct connection between MDPI journals and Preprints.org. Authors are encouraged to enjoy the benefits by posting a preprint at Preprints.org prior to publication:

  1. Immediately share your ideas ahead of publication and establish your research priority;
  2. Protect your idea from being stolen with this time-stamped preprint article;
  3. Enhance the exposure and impact of your research;
  4. Receive feedback from your peers in advance;
  5. Have it indexed in Web of Science (Preprint Citation Index), Google Scholar, Crossref, SHARE, PrePubMed, Scilit and Europe PMC.

Published Papers (2 papers)

Order results
Result details
Journals
Select all
Export citation of selected articles as:
19 pages, 10461 KiB  
Review
Spatial Distribution of Al, Zn, Fe, As, Pb, Mn, Cr, and Cu in Surface Waters of the Urumqi River Basin, China, and Assessment of Risks to Ecosystems and Human Health
by Yang Chen, Han Yang, Azimatjan Mamattursun, Kamila Ablikin and Nazakat Mijit
Water 2023, 15(17), 3079; https://0-doi-org.brum.beds.ac.uk/10.3390/w15173079 - 28 Aug 2023
Viewed by 815
Abstract
The study of pollution and risk assessment of surface water in watersheds is important for the use and management of surface water, as well as for the stability of ecosystems and human health. This study focused on a typical watershed in an arid [...] Read more.
The study of pollution and risk assessment of surface water in watersheds is important for the use and management of surface water, as well as for the stability of ecosystems and human health. This study focused on a typical watershed in an arid zone, the Urumqi River basin; divided the basin into upper, middle, and lower reaches according to the main uses of the surface water in the region; and collected surface water samples from the basin. We collected 41 surface water samples from the upper, middle, and lower reaches of the Urumqi River Basin, a typical arid zone watershed. The characteristics and spatial distribution of metal elements in the surface waters of the basin were analysed, the pollution status was evaluated, and risk assessments of the effects of these metal elements on natural ecosystems and human health were carried out. The results showed that (1) the average concentration of the metal element Al in the surface water of the Urumqi River Basin was 663.73 µg·L−1, which was 3.3 times that of the standard limit value (200 µg·L−1), with an exceedance rate of 100%, and the standard deviation value was 136.05 µg·L−1, with a large difference in spatial distribution. Spatial distributions for Al, Cu, Cr, Fe, Mn, and Zn were higher upriver and midstream than downriver, and for Pb and As, they were higher upriver, midstream, and downriver than downriver. (2) The values of the single-factor pollution index of the metal elements Zn, As, Pb, Mn, Cr, and Cu in the upper, middle, and lower reaches of the watershed were all less than 1, which is within the safe range. The integrated pollution indexes of 0.03~0.27 were all less than 0.7, which is within the safe range, and the integrated pollution of the upper reaches was significantly greater than that of the middle and lower reaches. (3) The total ecological risk of the basin ranged from 0.09 to 13.72, which is much lower than the low-risk indicator value of 150, and the ecological risk of the upper reaches was higher than that of the middle and lower reaches. (4) The health risk assessment showed that the total health risks of the eight metal elements to adults and children showed an upstream > downstream > midstream pattern, all of which exceeded the ICRP recommended value (10−5). The average annual total health risks of the carcinogenic metal elements chromium and arsenic to adults and children were 10−6 and 10−5 a−1, respectively, with arsenic concentrations exceeding the ICRP recommended value (10−5). Arsenic and lead in the surface waters of the Urumqi River Basin are important indicators of health risk and need to be prioritised as indicators for environmental risk management. Full article
Show Figures

Figure 1

15 pages, 4758 KiB  
Article
Extraction of Vanadium from the Spent Residuum Catalysts by Fenton-like Reaction Followed with Alkaline Leaching
by Yuefen Lv, Ge Zhao, Cailong Shen, Yanzhen Chen, Yiqun Fan, Guangji Zhang and Chao Yang
Processes 2023, 11(7), 2021; https://0-doi-org.brum.beds.ac.uk/10.3390/pr11072021 - 06 Jul 2023
Viewed by 1048
Abstract
Spent residuum hydroprocessing (RHDP) catalysts are hazardous waste bearing high-content vanadium and large amounts of oily pollutants. In this paper, a process featuring a Fenton-like reaction and alkaline leaching was proposed to recover vanadium from spent RHDP catalysts. In the first step, a [...] Read more.
Spent residuum hydroprocessing (RHDP) catalysts are hazardous waste bearing high-content vanadium and large amounts of oily pollutants. In this paper, a process featuring a Fenton-like reaction and alkaline leaching was proposed to recover vanadium from spent RHDP catalysts. In the first step, a Fenton-like reaction using peroxide was conducted to degrade the oily pollutants and make the surface of the spent catalyst becomes hydrophilic. In the second step, the vanadium-containing deposit on the catalyst was leached with 0.5 M Na2S2O8 at 70 °C for transforming vanadium sulfide to oxide in 5 h. In the last step, alkaline leaching was employed to dissolve vanadium from the oxidizing residue at 80 °C for 1 h. It was found that the accumulated leaching efficiency of vanadium can reach up to 90.92%, and only a small part of aluminum and sulfur was dissolved. These results indicated that this combined process can extract vanadium selectively from spent residuum hydroprocessing catalysts under a relatively mild condition. Full article
Show Figures

Graphical abstract

Back to TopTop